A9-005 Wireline Accessories Aluminum 70 ft Articulated Mast for Slickline and Wireline Profile Profile The KOLLER Aluminum Articulated Mast has been designed to support slickline and wireline well intervention. The support of rig up, rig down and operational forces are the main purpose of the mast. One main and two auxiliary winches assist the operator by lifting pressure control equipment. The slickline wire or the wireline cable can be taken by the mast top sheave, by a separate top sheave lifted by one auxiliary winch or by a top sheave mounted on top of the PCE. The lightweight alumi- num design allows helicopter transports and low capacity crane lifts. A hydraulic rig up and rig down of the mast makes the mast operation easy for the crew. • Aluminum lattice mast design • DNVGL-ST-0378 certificate for “Standard for offshore and platform lifting appliances” (former DNV 2.22) • DNVGL-ST-E273 certificate for “Portable offshore units” (former DNV 2.7-3; Class R30 for 3 m wave height) • 6,500 lbs / 3.000 kg hydraulic main winch (with dual line block; 2,800 lbs / 1.300 kg single line lift) • 1,100 lbs / 500 kg hydraulic auxiliary winch (with dual line block; 550 lbs / 250 kg single line lift) • 220 lbs / 100 kg manual auxiliary winch • Hydraulic controls • Hydraulic supply by separate power pack or by KOLLER winch power pack • Foldable outriggers for mast support Options • Machinery Directive 2006/42/CE declaration of conformity • ATEx 2014/34/EU, Zone I declaration of conformity • 45 ft and 90 ft mast heights • Hydraulic second auxiliary winch • Jacking wheels Wireline Units & Accessories Well Servicing Products Transport position