Top Banner
Wireless Level Controller MODEL M107 www.aquatel.co.nz wireless no need for control wires or trenching automatically turns on a pump to maintain the liquid level ultrasonic sound wave bounces off water to determine liquid level easy to set up and change settings at any time works on tanks of any construction up to 4m deep simple DIY installation that can be completed in minutes A COMPLETE WIRELESS CONTROL SYSTEM FOR MAINTAINING THE FLUID LEVEL IN YOUR TANK
2

Wireless Level Controller - rainharvestingsupplies.comrainharvestingsupplies.com/content/documentation/... · Wireless Level Controller ModeL M107 wireless • no need for control

Mar 28, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Wireless Level Controller - rainharvestingsupplies.comrainharvestingsupplies.com/content/documentation/... · Wireless Level Controller ModeL M107 wireless • no need for control

Wireless Level ControllerModeL M107

www.aquatel.co.nz

wireless • no need for control wires or trenching • automatically turns on a pump to

maintain the liquid level • ultrasonic • sound wave bounces off water to determine

liquid level • easy to set up and change settings at any time • works on tanks of any

construction up to 4m deep • simple DIY installation that can be completed in minutes

A CoMpLete WireLess ControL systeM ForMAintAining the FLuid LeveL in your tAnk

Page 2: Wireless Level Controller - rainharvestingsupplies.comrainharvestingsupplies.com/content/documentation/... · Wireless Level Controller ModeL M107 wireless • no need for control

how it worksThe Tank Unit is mounted on the top surface of the tank and uses ultrasonic signals to detect the fluid level inside.

This is then wirelessly transmitted through the Control Unit and onto the Display Unit. The Display Unit displays the

fluid level and system status on the LCD screen. The Display Unit is also used for setting the system settings such as level

thresholds. This is sent back to the Control Unit to switch the pump or valve on and off depending on the tank level.

M107

MENU

Tank levelIndicator Controller

• 4xAAAlkalinebatteries(supplied)

Features• comeswith1mpowerleadswithplug

andsocketforquickandeasyinstallation

• canbeusedtoswitchapump,asolenoid,oranyotherdevice

• unitcanbesetuptofilltank(fromabore),ordrainthetank(forsepticortransferapplications)

• haslowbatterywarnings,displaystemperatureofunitsandevenarapidwaterlossalarm

• Longrangeantennaavailable

(upto1,000mrange)

ExternalPowerJack

6VDC

Tank Unit

DetectionRange

0.1mto4m

(4”–13’)

* Range shown is line of sight. Objects between units will reduce range. Long range antenna available (up to 1,000m range)

• Useonanynon-flammablefluid (water,diesel,septic)• 4xAAAlkalinebatteries(supplied)

Display Unit

Timetonextlevelreading

(Statusmessages)

Currenttime

DisplayUniticon,temperature,

signalstrengthtoControlUnit

TankUniticon,temperature,

signalstrengthtoControlUnit

Display Unit Status Screen

'':AutoMode'':ManualMode:PumpOn

Aquatel NZ Ltd, PO Box 780, Wanaka 9343, New Zealand Email: [email protected]

300m*(1,000’)300m*(1,000’)

• Maximumswitchableload15A

• Availablein12VDC,24VAC,115VACand

230VACversions

2.4m(8’)Extension

cablePowerout

Powerin

Control Unit• Temperaturerange:

-10to+60°C(14 to 140°F)• IndividuallySecuritycodedsets

• Approval:AS/NZS4268:20031:2005CE

• Housing:ABSPlastic