Wireless IR Motion Detector（WL MD-A）

Wireless IR Motion Detector User Manual

1

Copyright notation ©2011 Nanjing IOT Sensor Technology Co., Ltd All Rights Reserved.

Wulian, are the trademarks and registered trademarks of Nanjing IOT Sensor Technology Co., Ltd. The other products mentioned in this article or company names may be the trademark or trade name of their respective owners.

Before installing and using the products, please read user manual carefully, which will help you use the products better. The pictures in the manual are just for your information. If some pictures are different from material object, the material object is final. The content in the manual is protected by copyright law legislator. It strictly prohibits any forms of copying, passing, distributing and storing any content of the manual without prior, written, consent of the instructor of Nanjing IOT Sensor Technology Co., Ltd. When using, if the practical situation of the product is different from that in the manual, or if you want to get more information, or you have any questions or ideas, please contact us as below: Service telephone: +86-25-5226 9091 Service website: http://www.wulian.cc/english/


2

Ⅰ.Product Introduction WL-MD-A Wireless IR Motion Detector is based on ZigBee technology design, it can detect infrared ray invasion in effective range and send out wireless alarm signal to host communication to realize the monitoring function.

The product has a wide application, it can be not only widely applied to smart home, but also monitoring system, intelligent hospital, wisdom hotel, intelligent building, wisdom breeding etc.

II. Main Features Support ZigBee HA protocol ZigBee device type: Terminal High sensitivity Effective detect distance reaches 6 meters No need of wiring, simple installation High stability to temperature changes Strong anti-interference ability Low power consumption, easy to conceal


3

III. Function illustration

IV. Installation Steps 1.The correct installation should meet the following conditions: (1) 2.0-2.5 meters from the ground; (2) Keep away from A/C, refrigerator, stovepipe etc. where temperature and humidity changes obviously; (3) Isolation objects such as shield, furniture, large potted landscape should be out of detection area;

12V power port

Multi-function key

LED Light

IR Detection Area


4

(4) Don’t install straight to the window, otherwise heat flow disturbances and personnel ambulation out of the window may cause misdeclaration. Draw the curtains will be better. And keep away from the place where strong airflow is active.

2. Installation Process (1) Fix the base to the specified location;

(2) Open the battery cover, load three AA batteries and then close it;


5

(3) Aiming main body of the product to groove and fix it firmly;

(4) Adjust the screws on the bracket of the base to a proper angle and tighten the screws.


6

Ⅴ. Application Method 1. Networking Connection Setup (1) The product should match up with WL-GW-A Wireless Gateway;

(2) Quick click【Multi-function key】4 times(Interval time of each click should be within 1 second) to join ZigBee network;

After joining ZigBee network, green LED light is constant on 2 seconds and then goes out.


7

(3) After joining ZigBee network, device sends ENROLL request to CIE settings in network;

(Note: The function is optional)

(4) Long pressing【Multi-function key】10 seconds to restore to the factory settings.

(Restoring to the factory settings as defaults of non-joining ZigBee network)

Enroll success, green LED light flickers 3 times quickly.

Green LED light flickers 4 times continuously


8

2. Software Download (1) Please select corresponding operating software according to various mobile intelligent terminals:

a) Android user please search "wulian" in "Google Play Store", select "Smart Home" software to download; b) iPhone users please search "Smart Home" in "APP Store", select "Smart Home" software to download;

c) Pad users can also download the software from our official website. Download site：http://www.wulian.cc/english/.

(2) Please carry on installation and operation according to the software prompting of each version; (3) Enter the setting and using stage when installation is completed; (4) According to the users’ needs, the product also supports computer operation.

3. How to use (1) Setting and using of the product need to be completed by software operation; (2) Please refer to the application method of each version for specific operations; (3) When setup finished, user can grasp monitoring information of the product via mobile intelligent terminal. Once there is an object breaking in, product can send out alarm information to mobile intelligent terminal and let user know the information in time and take corresponding measures.


9

Ⅵ. Notes About the installation When using the product for the first time, please read user manual of the product before installation. About the cleaning The product should be installed at a dry and clean place to avoid components inside getting wet or other sundries. Please use a fine cloth to wipe the dust on the surface. Don’t use corrosive cleaning fluid or other chemical solvent.

About the storage The box of the packaged products should be placed at a ventilated, dry place and the place without corrosive gases. Stack layer shouldn’t exceed ten layers, warehouse temperature should be within -10℃～

+40℃, humidity ≤75%.

About the transportation The box of the packaged product can be transported by any vehicle if it is avoided the direct influence of the rain, snow or sudden force etc.

About the battery Before using the product, please install the battery first. Pay attention to the anode and cathode during the installation and don’t assemble it reversely. Suggest using the battery with high power capacity.

About the after sale service If product breaks down, non-professionals shouldn’t open it and it should be sent to local maintenance station to maintain or you can directly contact with our customer service department.


10

Ⅶ. Product Specification

Communication mode IEEE802.15.4（ZigBee）

Communication distance 50m

Mounting height 2-2.5m

Detection type Motion detection

Detection mode Passive infrared

Detection area Radius 6m, 120°

Power supply Three AA batteries or 12V DC

Working temperature -10℃~+55℃

Weight 320g

Net weight 300g

Color Multiple colors available

Ⅷ. Products in Package Component Qty

Wireless IR Motion Detector 1 pc

User manual 1 pc

Expansion screw 2 sets

12V power supply adapter (optional) 1 pc


11

Ⅸ. Ordering Information

Art. No WLPN1106025

Model WL-MD-A

Dimension 138×118×68mm

Wireless IR Motion Detector（WL MD-A）

Devices & Hardware

android user

user manualcarefully

product need

cleaningthe product

wireless alarm signal

monitoring function

product introductionwlmd

monitoring information