Setup Access to Wireless 2.0 (PSU) using Intel ProSet Tools 1. Open Intel ProSet/Wireless WiFi Connection Utility 2. Click on Profiles 3. Click the Add button
Setup Access to Wireless 2.0 (PSU) using Intel ProSet Tools
1. Open Intel ProSet/Wireless WiFi Connection Utility
2. Click on Profiles
3. Click the Add button
4. Enter the following:
5. Click Next, fill in the following:
Your Penn State ID
6. Click Next, fill in the following:
7. Click OK
8. Click Close
9. Click Close
10. Should be connected to PSU wireless.