Wire Rope End Fittings Catalogue
Mar 11, 2016
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 2
Back to contents page
Contents
Wire Rope Thimbles Page 3-5
Ferrules and Crimps Page 6-12
Wire Rope Grips Page 13-18
DIY Stainless Steel Fittings (Cable balustrading and trellis) Page 19-24
Kwik-Loc Cable Grips Page 25
Swage End Terminals Page 26-31
TECNI Grip Fittings Page 32-51
Swageless Fittings Page 52-56
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 3
Very heavy duty, A4-AISI 316, marine grade stainless steel,
working thimble
Designed for reinforcing eyes in cable
Highly corrosion resistant, polished stainless finish
Order any quantity with no minimum order charge
Excellent for control cables, rigging, architectural applications where a heavy load is necessary
To fit, simply loop the cable around the outer groove and secure with a ferrule or wire rope Grip
Please note TECNI®Cable can fit all these thimbles for you and test the finished assembly.
For decorative and display applications, TECNI®Cable recommends the British-manufactured lighter SP range.
Stainless Steel Thimbles
Stainless Steel Thimbles (In Accordance To DIN 6899B)
Code Cable Diameter
(mm) W
(mm) L
(mm) B
(mm) Weight
(g)
308.900.020 2—2.5 12.5 25 1.25 4.5
308.900.030 3 13 28.5 1.25 6.2
308.900.040 4 13 33 1.25 12.9
308.900.050 5 15.5 36.5 1.25 23
308.900.060 6 17 40 1.5 25
308.900.080 8 22.5 51 1.5 45
308.900.100 10 26 58.5 2 50
308.900.120 12 31 68 2 105
308.900.140 14 34 74 2.5 114
308.900.160 16 37.5 83 2.5 127
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 4
Back to contents page
Stainless Steel Thimbles
Light weight, UK-manufactured, A2-AISI 304 grade stainless steel
thimble
Designed for reinforcing eyes in cable
Highly corrosion resistant
Order any quantity with no minimum order charge
Ideal for decorative and display applications
To fit simply loop the cable around the outer groove and secure with a
ferrule or wire rope Grip
Please note TECNI®Cable can fit all these thimbles for you and test the finished assembly
Stainless Steel SP67 Thimbles
Code Type Cable
Diameter (mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
f (mm)
Weight (g)
108.000.020 SP67A 1.5-2 9 17.8 3 2 0.6 24 1.4
108.000.030 SP67B 3-4 10 20.3 4.3 2.8 0.6 27 3
108.000.040 SP67C 3.5-4.5 13 25.4 5.3 3.3 0.7 35 4
108.000.050 SP67D 5 15.2 30.5 6.1 3.9 0.9 41 7
108.000.060 SP67E 6 17.8 35.6 6.9 4.3 0.9 48 10
108.000.070 SP67F 7 20.3 40.6 7.6 4.8 0.9 54 12
108.000.080 SP67G 8 22.9 45.7 8.4 5.3 1.2 57 15
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 5
Electro-plated (5mm and below) and Galvanised (6mm upwards) for extra corrosion resistance
Provides strong reliable cable eye reinforcement
Excellent value for money
Order any quantity with no minimum order charge
Simply loop the cable around the outer groove and secure with a
ferrule or wire rope Grips
Please note TECNI®Cable can fit all these thimbles for you and test the finished assembly.
Electro-Plated And Galvanised Thimbles Electro-Plated And Galvanised DIN 6899BF Wire Rope Thimbles
Code Cable
Diameter(mm) Finish
RW (mm)
C (mm)
L (mm)
S (mm)
Weight (g)
110.310.003 3 Electro-Plated 3 12 19 1.2 5
110.310.004 4 Electro-Plated 4 13 21 1.2 5
110.310.005 5 Electro-Plated 5 14 23 1.7 8
110.310.006 6 Galvanised 6 16 25 2.2 17
110.310.007 7 Galvanised 7 18 28 2.2 19
110.310.008 8 Galvanised 8 20 32 2.7 33
110.310.010 10 Galvanised 10 24 38 2.9 49
110.310.012 12 Galvanised 12 28 45 3.2 72
110.310.014 14 Galvanised 14 32 51 3.5 113
110.310.016 16 Galvanised 16 36 58 3.8 148
110.310.018 18 Galvanised 18 40 64 4.2 191
110.310.020 20 Galvanised 20 45 72 5.2 298
110.310.022 22 Galvanised 22 50 80 5.2 33
110.310.024 24 Galvanised 24 56 90 6.2 435
110.310.026 26 Galvanised 26 62 99 6.5 591
110.310.028 28 Galvanised 28 70 112 7.3 840
110.310.030 30 Galvanised 30 75 120 8 99
110.310.032 32 Galvanised 32 80 128 8 1058
110.310.034 34 Galvanised 34 95 152 8 1179
110.310.036 36 Galvanised 36 100 160 8 1331
110.310.038 38 Galvanised 38 110 176 8.5 2184
110.310.040 40 Galvanised 40 115 184 10.5 2928
110.310.042 42 Galvanised 42 120 192 10.5 5352
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 6
Back to contents page
EU-manufactured to highest standards
Also known as wire rope sleeves and cable crimps
Cost effective and rapid installation
Forms a strong, reliable eye termination
Swaging and crimping tools available from stock
No minimum order quantity or charge
Perfect for forming loops and eyes in galvanised wire rope
For larger sizes than those available from the webstore, please contact us.
Note:
TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings
Measurements relate to ferrules having been swaged by hydraulic press. If crimping by hand go size for size.
Example: Choose Code 1.5 ferrules for 1.5mm diameter cable and Code 3 ferrule for 3mm.
TALURIT Aluminium Ferrules
TALURIT Aluminium Ferrules EN13411-3
Code Ferrule No.
Wire Rope Diameter Range If Swaging With Hydraulic
Press Steel Core
Dies Marked Diameter
After Swaging
Length After Pressing Approx
Approx Swaging Pressure Required
R Min Max T mm mm kN
100.300.010 1 0.8 1 1 3 6.5 5
100.300.015 1.5 1.1 1.4 1.5 3.8 8 10
100.300.020 2 1.5 1.9 2 4 9 20
100.300.025 2.5 2 2.4 2.5 5 12 30
100.300.030 3 2.5 2.9 3 6 14 45
100.300.035 3.5 3 3.4 3.5 7 16 60
100.300.040 4 3.5 3.8 4 8 18 80
100.300.045 4.5 3.9 4.3 4.5 9 20 100
100.300.050 5 4.4 4.8 5 10 23 125
100.300.060 6 4.9 5.8 6 12 27 180
100.300.065 6.5 5.9 6.2 6.5 13 29 210
100.300.070 7 6.3 6.7 7 14 32 250
100.300.080 8 6.8 7.7 8 16 36 320
100.300.090 9 7.8 8.6 9 18 40 410
100.300.100 10 8.7 9.6 10 20 45 500
100.300.110 11 9.7 10.5 11 22 50 600
100.300.120 12 10.6 11.5 12 24 54 720
100.300.130 13 11.6 12.5 13 26 59 850
100.300.140 14 12.6 13.4 14 28 63 1000
100.300.160 16 13.5 15.3 16 32 72 1300
100.300.180 18 15.4 17.3 18 36 81 1600
100.300.200 20 17.4 19.2 20 40 90 2000
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 7
EU-manufactured to highest standards
Also known as wire rope sleeves and cable crimps
Cost effective and rapid installation
Forms a strong, reliable eye termination
Swaging and crimping tools available from stock
No minimum order quantity or charge
Perfect for forming loops and eyes in galvanised
wire rope
For larger sizes than those available from the webstore, please contact us
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings.
Measurements relate to ferrules having been swaged by hydraulic press. If crimping by hand go size for size.
Example: Choose Code 1.5 ferrules for 1.5mm diameter cable and Code 3 ferrule for 3mm.
TALURIT Aluminium Ferrules
TALURIT Aluminium Stop Ferrules
Code Ferrule No.
Wire Rope
Diameter Range Steel Core
Dies Marked Diameter After
Swaging
Approx Swaging
Pressure Required
R Min Max T mm kN
100.315.015 1.5 1 1.5 1.5 3.8 20
100.315.020 2 1.5 2 2 4 30
100.315.030 3 2.5 3 3 6 60
100.315.040 4 3.4 4 4 8 100
100.315.050 5 4.3 5 5 10 180
100.315.060 6 4.8 6 6 12 210
100.315.065 6.5 5.7 6.5 6.5 13 250
100.315.070 7 6.2 7 7 14 320
100.315.080 8 6.7 8 8 16 410
100.315.090 9 7.6 9 9 18 500
100.315.100 10 8.3 10 10 20 600
100.315.110 11 9.3 11 11 22 720
100.315.120 12 10.3 12 12 24 850
100.315.130 13 11.3 13 13 26 1000
100.315.140 14 12.3 14 14 28 1300
100.315.160 16 13.3 16 16 32 1600
100.315.180 18 14.8 18 18 36 2000
100.315.200 20 16.7 20 20 40 2400
100.315.220 22 18.5 22 22 44 2900
100.315.240 24 20.5 24 24 48 3400
100.315.260 26 22.6 26 26 52 3900
100.315.280 28 24.7 28 28 56 4500
100.315.300 30 26.2 30 30 60 5100
100.315.320 32 28.2 32 32 64 5800
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 8
Back to contents page
EU-manufactured to highest standards
Also known as wire rope sleeves and cable crimps
Cost effective and rapid installation
Forms a strong, reliable eye termination
Swaging and crimping tools available from stock
No minimum order quantity or charge
Perfect for forming loops and eyes in stainless steel wire rope
For larger sizes than those available from the webstore, please
contact us
Note: TECNI®Cable can fit this item onto cable, test the finished
assembly and engrave data onto fittings
Measurements relate to ferrules having been swaged by hydraulic press. If crimping by hand go size for size.
Example: Choose Code 1.5 ferrules for 1.5mm diameter cable and Code 3 ferrule for 3mm.
TALURIT Copper Ferrules
TALURIT Copper Ferrules
Code Ferrule No. Wire Rope Diameter Steel Core
Range Dies Diameter Approx Swaging
Marked After Swaging Pressure Required
Min Hydraulic Max
Hand Crimp Max
T mm kN
100.305.010 1 0.8 0.9 1 1 3 10
100.305.015 1.5 1 1.4 1.5 1.5 3.8 20
100.305.020 2 1.5 1.9 2 2 4 30
100.305.025 2.5 2 2.4 2.5 2.5 5 45
100.305.030 3 2.5 2.8 3 3 6 60
100.305.035 3.5 2.9 3.3 3.5 3.5 7 80
100.305.040 4 3.4 3.8 4 4 8 100
100.305.045 4.5 3.9 4.2 4.5 4.5 9 125
100.305.050 5 4.3 4.7 5 5 10 180
100.305.060 6 4.8 5.6 6 6 12 210
100.305.065 6.5 5.7 6.1 6.5 13 250
100.305.070 7 6.2 6.6 7 14 320
100.305.080 8 6.7 7.5 8 16 410
100.305.090 9 7.6 8.2 9 18 500
100.305.100 10 8.3 9.2 10 20 600
100.305.110 11 9.3 10.2 11 22 720
100.305.120 12 10.3 11.2 12 24 850
100.305.130 13 11.3 12.2 13 26 1000
100.305.140 14 12.3 13.2 14 28 1300
100.305.160 16 13.3 14.7 16 32 1600
100.305.180 18 14.8 16.6 18 36 2000
100.305.200 20 16.7 18.4 20 40 2400
100.305.220 22 18.5 20.4 22 44 2900
100.305.240 24 20.5 22.5 24 48 3400
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 9
EU-manufactured to highest standards
Also known as wire rope sleeves and cable crimps
Cost effective and rapid installation
Forms a strong, reliable eye termination
Swaging and crimping tools available from stock
No minimum order quantity or charge
Perfect for forming loops and eyes in stainless steel wire rope
For larger sizes than those available from the webstore, please
contact us
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings.
Measurements relate to ferrules having been swaged by hydraulic press. If crimping by hand go size for size.
Example: Choose Code 1.5 ferrules for 1.5mm diameter cable and Code 3 ferrule for 3mm.
Code Ferrule No. Wire Rope Diameter Range Steel Core
Dies Marked
Diameter After Pressing
Approx Swaging Pressure Required
R Min Max T mm kN
100.320.015 1.5 1 1.5 1.5 3.8 20
100.320.020 2 1.5 2 2 4 30
100.320.030 3 2.5 3 3 6 60
100.320.040 4 3.4 4 4 8 100
100.320.050 5 4.3 5 5 10 180
100.320.060 6 4.8 6 6 12 210
100.320.070 7 6.2 7 7 14 320
100.320.080 8 6.7 8 8 16 410
TALURIT Copper Ferrules
TALURIT Copper Stop Ferrules
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 10
Back to contents page
A4-AISI 316, marine grade stainless ferrules, also known as wire
rope sleeves and cable crimps
EU-Manufactured to the highest standards
Specially designed for harsh environment
Highly corrosion resistant
Stainless finish provides colour consistency
Forms a strong, reliable eye termination
Swaging and crimping tools available from stock
Extremely hard and must be crimped in a hydraulic press with
suitable dies fitted for safety
No minimum order quantity or charge
Primarily designed for forming loops and eyes in stainless steel
wire rope
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings.
Measurements relate to ferrules having been swaged by hydraulic press. If crimping by hand go size for
size. Example: Choose Code 1.5 ferrules for 1.5mm diameter cable and Code 3 ferrule for 3mm.
Stainless Steel Ferrules
TALURIT Stainless Steel Ferrules
Code Ferrule No. Wire Rope
Diameter Range Steel Core
Dies Marked Diameter
After Pressing
Approx Swaging Pressure Required
R Min Max T mm kN
100.310.010 1 0.8 1 1 3.6 70
100.310.015 1.5 1.1 1.5 1.5 4.2 100
100.310.020 2 1.5 2 2 4.8 160
100.310.025 2.5 2.1 2.6 2.5 5 200
100.310.030 3 2.7 3 3 6 250
100.310.040 4 3.6 4 4 8 350
100.310.050 5 4.6 5 5 10.8 500
100.310.060 6 5.1 6.1 6 12 600
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 11
A4-AISI 316, marine grade stainless steel stop
ferrule
Also known as wire rope sleeve and cable
crimps
Specially designed for harsh environment
Stainless finish provides colour consistency
Forms a strong, reliable stop termination
No minimum order quantity or charge
Swaging and crimping tools available from stock
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings
Stainless Steel Stop Ferrules
Stainless Steel Round Stop Ferrules
Code
Fits Cable
Diameter b L a
(mm) (mm) (mm) (mm)
208.606.010 1 3 6 1.2
208.606.015 1.6 1.8 4 8
208.606.020 2 4 8 2.2
208.606.025 2.5 5 10 2.8
208.606.030 3 6 10 3.3
208.606.040 4 6 10 4.3
208.606.050 5 8 12 5.3
208.606.060 6 10 16 6.4
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 12
Back to contents page
Double copper ferrules, custom made for micro cables
Figure of eight design allows the central section to
crimp more easily and provide a strong, reliable termination
Suitable crimping tool available from stock
Order any quantity with no minimum order charge
Perfect for forming loops and eyes in uncoated,
stainless wire rope
Fit using crimp tool, catalogue code 115.007.023
To fit, simply insert cable through opening & return
through other side to form eye. Hold the ferrule perpendicular to the die face & crimp.
Note: TECNI®Cable can fit this item onto cable, test the
finished assembly and engrave data onto fittings Crimp Tool 115.007.023
Double Copper Ferrules
Double Copper Ferrules
Code Size
Cable
Diameter D1
(mm)
D2
(mm)
L
(mm)
W1
(mm)
W2
(mm)
Weight
(g)
(mm)
115.000.700 0.7 0.54 - 0.68 2.4 1.6 5 1.4 0.8 0.05
115.000.800 0.8 0.72 - 0.81 2.45 1.9 5 1.45 0.9 0.05
115.000.010 1 0.9 -1.0 3.7 2.4 7 2.1 1.2 0.2
115.000.013 1.3 1.1 -1.3 4.1 3 7 2.5 1.31 0.3
115.000.016 1.6 1.5 - 1.6 4.8 3.7 9.5 2.8 1.7 0.4
115.000.019 1.9 1.8 - 1.9 5.4 4.1 14 3.2 2 0.9
115.000.022 2.2 1.8 -2.2 6 4.6 14.2 3.6 2 1
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 13
Highly polished, highly corrosion resistant
A4-AISI 316, DIN 741 stainless steel wire clips
Quick and easy means of forming eyes in wire rope
Order any quantity, no minimum order charge
Recommend minimum of 3 clips per termination
Suitable for use with 7x7 and 7x19 cables. Not
suitable for 1x19 construction cables
Approximate failure load approximately 85% of the
cable's breaking load
Ideal for hanging signs, catenary wire projects and many cable-tensioning applications
Please note: Wire rope clips should never be used for lifting.
Stainless Steel Wire Rope Clips
Stainless Steel Wire Rope Clips DIN 741
Code
Fits Cable Diamater D
(mm) L
(mm) W
(mm) W1
(mm)
Weight
(mm) (g)
309.010.003 3 3.5 20 20 10 11.3
309.010.005 5 4.3 22 23 10 16.5
309.010.006 6 4.5 23 25 12 22
309.010.008 8 5.2 28 30 14 36.5
309.010.010 10 7 37 34 15 58.5
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 14
Back to contents page
Galvanised DIN 471 and EN13411-5 (DIN 1142) wire clips or
Bulldog Grips
Quick and easy means of forming strong, reliable eyes in
wire rope
Excellent value for money
Order any quantity and no minimum order charge
Recommended minimum of 3 clips per termination for
smaller cables and 4 clips for 8mm cable and above
Approximate failure load approximately 85% of the cable's
breaking load
Ideal for hanging signs, catenary wire projects and many cable-tensioning applications
Note: See ‘how to’ video at www.tecni-cable.co.uk/5mm-Wire-Rope-Clip-Grip-EN-13411-5-DIN-1142-121-820-005 Wire rope Grips should not be used for lifting.
Galvanised Wire Rope Clips
Galvanised Wire Rope Clips DIN 471 And EN13411-5 (DIN 1142)
Code
Fits Cable Diamater
a (mm)
b1 (mm)
b2 (mm)
h1 (mm)
h2 (mm)
l (mm)
Weight
(mm) (g)
121.820.005 M5 13 7 13 25 13 25 21
121.820.006 M6.5 17 8 16 32 14 30 40
121.820.008 M8 20 20 20 41 18 39 82
121.820.010 M10 24 12 20 46 21 40 92
Note: Clips for 13, 14, 16 and 19mm cable are available on request.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 15
Polished, A4-AISI 316, marine grade Simplex wire rope clips
Simplex clips are best suited for use with 7x19 cables
Not suitable for 1x19 construction cables or 7x7 construction over 3mm
Highly corrosion resistant
Easy to fit
Order any quantity, no minimum order charge
Excellent for forming eyes in wire ropes
Ideal for display applications, washing lines and other light duty
applications
Approximate failure load is approximately 20% of the cable's breaking load
To fit, simply loop the cable each side of the threaded bolt and tighten
down the plate using a suitable spanner
For more detailed fitting instructions and a demonstration video, please visit the TECNI®Cable website at
http://www.TECNI®Cable.co.uk/Products/A4-AISI-316-Stainless-Steel-Simplex-Wire-Rope-Clips-Grips
Please note: Simplex wire rope clips are NOT suitable for lifting.
Stainless Wire Rope Clips
Stainless Steel Simplex Wire Rope Clips
Code Cable
Diameter b1
(mm) b2
(mm) d
(mm) h1
(mm) h2
(mm) L1
(mm) Weight
(g)
309.100.002 1.8-2mm 5.5 13 M4 5 14 18.5 4.8
309.100.003 2.5-3mm 8.5 16 M4 6 14 18.5 5.6
309.100.004 4mm 8.5 17 M5 7 19.5 20.5 11
309.100.005 5mm 10.5 19 M5 8 19.5 25 14.8
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 16
Back to contents page
Highly polished, A4-AISI 316, DIN 741 stainless steel Duplex wire rope clips
Highly corrosion resistant
Quick and easy means of forming eyes in wire rope
Order any quantity, no minimum order charge
Best suited for use with 7x19 cables. Not suitable for 1x19
construction cables or 7x7 construction over 3mm diameter
Ideal for display applications and often used for crane pendant
control support wires
Approximate failure load approximately 30% of the cable's breaking
load
To fit, simply loop the cable each side of the threaded bolt and
tighten down the plate using a suitable spanner
For more detailed fitting instructions and a demonstration video, please visit the TECNI®Cable website at
http://www.TECNI®Cable.co.uk/Products/A4-AISI-316-Stainless-Steel-Duplex-Wire-Rope-Clips-Grips
Note: Duplex wire rope clips are not suitable for lifting.
Stainless Steel Wire Rope Clips
Stainless Steel Duplex Wire Rope Clips
Code Cable
Diameter b1
(mm) b2
(mm) d
(mm) h1
(mm) h2
(mm) L 2
(mm) Weight
(g)
309.101.002 1.8-2mm 5 13 M4 5 13 37 10
309.101.003 2.5-3mm 7 14 M4 7 14 40 13
309.101.004 4mm 10 18 M5 7 18 43 22
309.101.005 5mm 10 20 M5 8 20 53 31
309.101.006 6mm 12 25 M6 9 23 63 55
309.101.008 8mm 17 30 M8 13 30 75 95
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 17
Zinc-plated, galvanised Simplex wire rope clips
Excellent value for money
Good corrosion resistance
Easy to fit
Order any quantity, no minimum order charge
Excellent for forming eyes in wire ropes
Ideal for display applications and often used for crane pendant
control support wires
Best suited for use with 7x19 cables
Not suitable for 1x19 construction cables or 7x7 construction over
3mm diameter
Approximate failure load is approximately 20% of the cable's
breaking load
To fit, simply loop the cable each side of the threaded bolt and tighten down the plate using a suitable
spanner.
For detailed fitting instructions and a demonstration video, please visit the TECNI®Cable website at http://
www.TECNI®Cable.co.uk/Products/Simplex-Galvanised-Wire-Rope-Clips-Grips
Please note: Wire rope clips are not suitable for lifting.
Galvanised Wire Rope Clips
Galvanised Simplex Wire Rope Clips
Code Cable
Diameter b1
(mm) b2
(mm) d
(mm) h1
(mm) h2
(mm) L1
(mm) Weight
(g)
121.920.002 1.8-2mm 4 12 M4 5 14 15 5
121.920.003 2.5-3mm 6 14 M4 7 14 17.8 8
121.920.004 4mm 8 18 M5 7 18 20 13
121.920.005 5mm 10 20 M5 8 18 25 20
121.920.006 6mm 12 24 M6 9 23 30 27
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 18
Back to contents page
Zinc-plated, galvanised Duplex wire rope clips
Good corrosion resistance
Provides strong reliable eye termination
Order any quantity with no minimum order charge
Best suited for 7x19 cables. Not suitable for 1x19 and 7x7
constructions for 4mm and above
Approximate failure load is 30% of the cable's breaking load.
To fit, simply loop the cable each side of the threaded bolt and
tighten down the plate using a suitable spanner
For detailed fitting instructions and video, please visit our website
Note: Duplex wire rope clips are not suitable for lifting
Galvanised Wire Clips
Galvanised Duplex Wire Rope Clips
Code Cable
Diameter
b1 b2 d
h1 h2 l2 Weight (g) (mm) (mm) (mm) (mm) (mm)
122.020.002 1.8-2mm 4 12 M4 5 14 30 10
122.020.003 2.5-3mm 6 14 M4 7 14 35 15
122.020.004 4mm 8 18 M5 7 18 40 25
122.020.005 5mm 10 20 M5 8 18 50 29
122.020.006 6mm 12 24 M6 9 23 60 50
122.020.008 8mm 17 30 M8 13 25 75 106
122.020.010 10mm 21 35 M10 16 32 95 171
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 19
DIY Stainless Steel Fittings
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 20
Back to contents page
Highly corrosion resistant, A4-AISI 316, marine
grade, stainless steel crossover clip
Accommodates both horizontal and vertical
cable runs
Highly polished
Easy to use
No specialist tools needed
Reusable for future projects
Order any quantity with no minimum order
charge
Attached to M6 or M8 threads can be used for
countless applications
Perfect for wall-mounted garden trellis systems
or on its own to form cable nets/grids
Stainless Steel Self-Assembly Terminals
Stainless Steel Crossover Clips
Code Cable Diameter D
(mm) D3
(mm) L
(mm) m
(mm) Weight
(g)
208.842.802 1.8, 2 & 2.5mm 12 M6 15 3 8.6
208.842.804 3mm and 4mm 20 M8 21 4 33.6
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 21
Innovative and stylish, highly corrosion resistant, A4-AISI 316
stainless steel cable trellis fitting
Suitable for all climbing plants
Ideal for use on walls and fences
Supports 2.5 to 4mm cable both vertically and horizontally
Strong, practical and versatile
Easy to install
Reusable for future projects
Attachment fittings, cable and tensioners available from stock
To see the system and how easy it is to install, watch the video at www.TECNI®Cable.co.uk/trellis
Stainless Steel Cable Trellis
Stainless Steel Wall Attachments For Garden Trellis
Code Cable
Diameter Metric Thread
Length Distance From
Wall Overall Length
Head Length
Weight (g)
208.515.254 1.8, 2 & 2.5mm M6 37mm 95mm 15mm 33.2
208.515.354 3 & 4mm M8 35mm 100mm 23.5mm 80
208.515.604 3 & 4mm M8 60mm 130mm 23.5mm 88
Mini Trellis System 208.515.254
‘Stubby’ Trellis System 208.515.354
Standard Trellis System 208.515.604
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 22
Back to contents page
Versatile, highly corrosion resistant, A4-AISI 316, marine grade, stainless
steel fitting
Left and right-handed terminals available
UK-manufactured
Reusable for future projects
No specialist tools needed
Simply insert cable and tighten allen-headed screws
Limitless applications
Internally threaded self-assembly terminal with attractive brush finish
Perfect for any DIY cable balustrading, garden trellis, architectural or
suspended system project where specialist swaging tools are not an option
Best selling product for cable balustrading and horizontal trellis systems
Note: This fitting is not suitable for lifting and should be used for tensioning applications only.
Stainless Steel Self-Assembly Terminals
Stainless Steel DIY Terminals
Code Cable
Diameter
D1 D2 L1 L2 L3 Weight
(mm) (mm) (mm) (mm) (mm) (g)
160.675.040 3-4mm M6 RH 12 75 30 45 50
160.675.041 3-4mm M6 LH 12 75 30 45 50
160.880.060 5-6mm M8 RH 16 75 30 45 86
160.880.061 5-6mm M8 LH 16 75 30 45 86
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 23
Stainless Steel Self-Assembly Terminals
Highly corrosion resistant, A4-AISI 316, marine grade stainless steel
self-assembly clip
Attaches to wooden or steel posts
Suitable for use with 3—6mm cable
Tension end fittings against flat sides
Use at intermediate or end posts
Use instead of drilling posts
Rotates to correct angle for stair sections
Attractive modern design with satin finish
Limitless applications including balustrading, marine and display
.
The videos at www.TECNI®Cable.co.uk/balustrading show both products being installed and in use.
Stainless Steel Newel Clip
Code 160.215.036
Photos show newel clip being used on intermediate post and in conjunction
with our self-assembly DIY fitting, product code: 160.675.040, page 52.
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 24
Back to contents page
A4-AISI 316, marine grade, stainless steel self-assembly stop
fittings
Highly polished
No specialist tools needed
Reusable for future projects
Highly corrosion resistant
Order any quantity with no minimum order charge
Perfect for holding up shelving, garden trellis systems and
covering through holes in posts for cable balustrading
To install, simply insert cable and tighten using Allen headed
grub screws.
Stainless Steel Self Assembly Terminals
Stainless Steel DIY Stop Fittings
Code Cable Diameter d1 d2 L m Weight
(g) (mm) (mm) (mm) (mm) (mm)
351.710.002 1.5-2 10 M4 8 2.2 4
351.710.004 3-4 15 M8 12 3.2 13
351.710.006 5-6 20 M10 15 6.3 40
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 25
Kwik-Loc Cable Grips
Kwik-Loc Cable Grips For 1.2mm–4.5mm Cables
Code Type Fits Cable
Size (mm)
Max Suspension
(kgs) *
A
(mm)
B
(mm)
B1
(mm)
C
(mm)
D
(mm)
Weight
(g)
113.012.012 KL-50 1.2 10 9.3 11 15 19 14.5 9.2
113.015.023 Kl-100 1.5-2.3 60-75 12.1 12.4 15 26.5 19.5 21
113.025.035 KL-150 2.5-3.5 120 17.5 14.9 21 36.5 26.4 48
113.030.045 KL-200 3-4.5 230 30 21 24 48 40.5 140
Kwik-Loc Tensioning Tool
Robust, tensioning tool for straining and tensioning Rize KL50, KL100, KL150 & KL200 Kwik-Loc fittings
Designed to apply tension of up to 600lbs on wire
Powerful lever action tensions and re-tensions the wire in seconds
Works by holding the Kwik-Loc body and pulling the wire through the Kwik-Loc using the cam and anvil
Rubber Grip handles
Watch the handy ‘how to’ video here
.
Code Length (mm) Head Width (mm) Weight (kgs)
113.000.221 600 200 2.6
Light weight, easy-to -fit cable Grip for joining, tensioning and creating
loops in cables on site.
Can suspend vertically or at an angle
Adjust by hand. No specialist tools required
Fully reusable for other projects
Corrosion-resistant zinc alloy housing
Tensioning tool available from stock
Please note: For static suspension and tensioning use only. Not to be used for dynamic overhead lifting. Watch the handy ‘how to’ video at http://www.TECNI®Cable.co.uk/Products/Kwik-Loc-Cable-Grip
Page 26
Back to contents page
A4-AISI 316, marine grade, stainless steel, standard swage stud terminals
Available with right or left hand metric thread
Provides a very strong and reliable termination
Swaging tools and equipment available
To fit, simply insert cable into the opening and swage using a hydraulic press or roller swager
Ideal for balustrading and suspended systems
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings
Swage Stud Terminals
Stainless Steel Swage Stud Terminals Standard Type RH And LH
* Left hand threads
Code Cable
Diameter d1
(mm) Thread
d2 (mm)
d3 (mm)
L1 (mm)
L2 (mm)
L3 (mm)
SW (mm)
Weight (g)
301.010.005 2.5 M5 RH 5.4 3 86 37 40 4.5 11
301.011.005 * 2.5 M5 LH 5.4 3 86 37 40 4 11
301.010.006 3 M6 RH 6.2 3.3 101 41 48 5 19
301.011.006 * 3 M6 LH 6.2 3.3 101 41 48 5 19
301.010.046 4 M6 RH 7.5 4.3 110 45 48 6 35
301.010.008 4 M8 RH 7.5 4.3 118 45 57 5.8 38
301.011.008 * 4 M8 LH 7.5 4.3 118 45 57 5.8 38
301.010.058 5 M8 RH 9.0 5.3 123 51 57 7 58
301.010.010 5 M10 RH 9.0 5.3 131 57 61 7 65
301.011.010 * 5 M10 LH 9.0 5.3 131 57 61 7 65
301.010.610 6 M10 RH 12.5 6.3 145 64 63 7 100
301.010.012 6 M12 RH 12.5 6.3 162 66 79 10 132
301.010.012 * 6 M12 LH 12.5 6.3 162 66 79 10 132
301.010.016 8 M16 RH 16.0 8.3 214 80 102 14 260
301.010.016 * 8 M16 LH 16.0 8.3 214 80 102 14 260
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 27
A2-AISI 304 stainless steel swage shank ball terminals
USA-manufactured
Provides very strong and reliable termination or stop fitting
Assemblies manufactured to order
Cable, fittings and swaging tools available from stock
Ideal for gym cables, decorative and display applications,
balustrading or suspended systems
To fit, simply insert cable into the opening and swage on using
a hydraulic press
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings.
Stainless Steel Ball Stop
Stainless Steel Single Shank Ball Terminal (Similar MS20664 Series)
Code A
(mm) B
(mm) C
(mm) D unswaged
(mm) Weight
(g)
127.206.642 3.4 3.9 6.8 5.4 1
127.206.643 4.2 6.5 9.8 7.2 1.2
127.206.644 5.6 7.8 12.7 8.9 2.5
127.206.645 6.5 9 15.7 10.8 4.4
127.206.646 7.8 11.2 18.7 12.5 6.4
127.206.648 10.25 14.4 24.5 16 15
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 28
Back to contents page
A2-AISI 304 stainless swage ball fitting
USA-manufactured
Provides very strong and reliable termination or stop fitting
Cable, fittings and swaging tools available from stock
Assemblies made to order
Ideal for gym cables, decorative and display applications,
balustrading or suspended systems
To fit, simply insert cable into the ball and swage on using a
hydraulic press
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings.
Stainless Steel Ball Stop
BA3-1 A2-AISI 304 Stainless Swage Ball Fitting
Code A
(mm) A swaged
(mm) B
(mm) C
(mm)
Weight (g)
127.000.010 5.3 4.8 0.9 3.5 0.4
127.000.012 5.3 4.8 1.4 3.5 0.4
127.000.015 5.3 4.8 1.9 3.5 0.4
127.000.020 7.3 6.4 2.6 4.4 0.9
127.000.030 9 8 3.6 4.7 1.7
127.000.040 10.8 9.6 4.4 5.7 3
127.000.050 12.6 11.2 5.2 6.7 5
Page 29
Back to contents page
A4-AISI 316, marine grade, stainless
steel standard jaw terminals
Provides very strong and reliable
termination
Swaging tools and equipment available
Removable clevis pin, which fits onto a
suitably sized eye terminal or attachment point
To fit, simply insert cable into the opening and swage using a hydraulic press
Perfect for applications such as balustrading or suspended systems
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings
Stainless Steel Swage Jaw Terminals Standard Type
Stainless Steel Swage Jaw Terminals
Code
Fits Cable D D1 L L1 L2 W Weight
Diameter (mm) (mm) (mm) (mm) (mm) (mm) (g)
(mm)
301.020.002 2 5 5.5 58 32 12 7.5
301.020.025 2.5 5 5.5 58 32 12 7.5
301.020.003 3 6 6.4 68 38 13 9.5
301.020.004 4 8 7.5 77 45 15 11
301.020.005 5 9.5 9 91 51 19 12
301.020.006 6 12 12.6 110 64 25 14
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 30
Back to contents page
Stainless Steel Swage Small Eye Terminal
Neat, highly polished, A4-AISI 316, marine
grade stainless steel small eye terminal
Provides very strong and reliable
termination
Swaging tools and equipment available
To fit, simply insert cable into the opening
and swage using a hydraulic press
Ideal for suspended systems, display, security and other limitless applications
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings
Highly polished, A4-AISI 316, marine grade,
stainless steel standard eye terminal
Provides very strong and reliable
termination
Swaging tools and equipment available
To fit, simply insert cable into the opening
and swage using a hydraulic press
Perfect for applications such as
balustrading, suspended systems, yacht rigging
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings
Stainless Steel Swage Eye Terminals
Stainless Steel Swage Eye Terminal Standard Type
Code
Fits Cable Diameter
L L1 L2 (mm)
L3 D d B W Weight
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)2 (g)
208.308.030 3 36 25 6 11 5.5 5.3 2.5 9
208.308.040 4 38 25 6.5 12 6.4 5.3 3 10
208.308.050 5 43 30 7 13 7.5 5.3 3.75 11
208.308.060 6 62 40 8.5 16 9 6.3 4.5 14
Code
Fits Cable Diameter
D d W (mm)
L L1 B Weight
(mm) (mm) (mm) (mm) (mm) (mm) (g)
208.814.020 2 5.5 5.5 12 45 32 3 8
208.814.025 2.5 5.5 5.5 12 45 32 3 8
208.814.030 3 6.5 6.5 14 54 38 4 12
208.814.040 4 7.5 8.5 17 64 45 5 20
208.814.050 5 9 10.5 21 75 51 6 34
208.814.060 6 12.6 13 25 95 64 8 90
208.814.080 8 16 14.5 30 120 83 10 170
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 31
Compact, plated copper swage terminals
Versatile and adaptable
Provides very strong and reliable termination
Flat profile allows for bolting or wall fixing
Swaging tools and equipment available
Perfect for applications such as suspension, shop fittings and
security cables
To fit, simply insert cable into the opening and swage using a
hydraulic press or suitable crimping tool
Note: TECNI®Cable can fit this item onto cable, test the finished assembly and engrave data onto fittings
Code Fits Cable Diameter
(mm)
A (mm)
B (mm)
C (mm)
D1 (mm)
D2 (mm)
E (mm)
Weight (g)
180.006.030 3 11.3 15 6.5 3.07 5.5 12 4.9
Swage Eye Terminals
Plated Copper Swage Eye Terminals
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 32
Back to contents page
TECNI®GRIP Type 12 Cable Suspension Fittings
Polished nickel-plated, M8 fine threaded TECNI®Grip fitting
For use with 0.8-1mm cable
Fit and adjust by hand
Screw hole for attaching to ceiling or wall
Side exit slit for infinite cable adjustment
Reusable for future projects
Very compact design with strong termination
Designed as an attachment point for similarly threaded fittings
Perfect for display and hanging applications such as shop displays,
picture galleries, museums, sign hanging, lighting fixtures, horizontal and vertical tensioning.
This part is suitable with Type 12 Holder M8x1x8 A9 (Catalogue Code
193.000.139)
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
Weight (g)
029.006.031 0.8 x 1 (fine) 11 16 18 20 9 2 4.2 4.5
TECNI®GRIP Type 12 Ceiling Attachment M8i-1 OR c/w Slit
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two
or more holders should be used for each suspension where possible.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 33
Nickel-plated, versatile, M8 RH fine thread TECNI®Grip
fitting
For use with 0.54-1.2mm cable
Fit and adjust by hand —simply insert cable into plunger.
The cable is gripped by ball bearings inside the fitting for infinite adjustment
Reusable for future projects
Very compact design with strong termination
Perfect for display and hanging applications such as shop
displays, picture galleries, museums, sign hanging, lighting fixtures, horizontal and vertical tensioning.
For more details and a product video, please visit our
website.
Code Fits Cable Diameter
(mm) Thread D
A (mm)
B (mm)
C (mm)
Weight (g)
193.000.139 0.54-1.2 M8 x 1 (Fine) 8 10 9 2.9
TECNI®GRIP Type 12 Holder M8x1 (Fine Thread)
TECNI®GRIP Type 12 Cable Suspension Fittings
TECNI®GRIP Type 12 Ceiling Attachment M8i-1 OR
Nickel-plated, versatile, M8 fine threaded TECNI®Grip fitting
For use with 0.8-1mm, 7x7 & 7x19, cable
Fit and adjust by hand — simply insert cable into plunger. The cable is
gripped by ball bearings inside the side exit slit for infinite adjustment
Screw hole for attaching to ceiling or wall
Reusable for future projects
Very compact design with strong termination
Designed as an attachment point for similarly threaded fittings
Perfect for display and hanging applications such as shop displays,
picture galleries, museums, sign hanging, lighting fixtures, horizontal and vertical tensioning.
This part is suitable with Type 12 Holder M8x1x8 A9 (Catalogue Code
193.000.139)
For more details and a product video, please visit our website.
Code
Fits Cable Diameter (mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
Weight (g)
029.006.201 0.8 x 1 (fine) 9 12 11 10.5 4.2 3.5
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 34
Back to contents page
TECNI®GRIP Ball Holder Type 12 and Type 15
Smart and compact nickel-plated TECNI®Grip ball fitting
For use with 7x7 and 7x19, cable
Reusable for future projects
Very compact design and strong termination
Extremely rapid installation
No specialist tools needed
Easy to fit and adjust by hand—insert the cable into the
plunger and the cable is gripped by ball bearings inside for infinite adjustment
Excellent for suspension applications such as light fittings,
shelving, cable tensioning etc
For more details and a product video, please visit our
website.
Code Fits Cable Diameter
(mm) A
(mm) Weight
(g)
160.012.012 0.54-1.2 11.6 5.9
160.018.015 1—1.5 17.8 22
TECNI®GRIP Cable Suspension Fittings
Important to note: TECNI®GRIP holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two
or more holders should be used for each suspension where possible.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 35
Two part ceiling attachment with M6 female thread
For use with 1.2mm to 2.5mm, 7x7 & 7x19, cable
Cost effective fitting
Attractive nickel-plated finish
Can be fitted easily on-site without specialist tools
Compact design
Strong, reusable cable fitting
Perfect for cable display and suspension applications such as shop fittings, shelving, cable tensioning etc
For product video, please visit our website.
TECNI®GRIP Type 15 Cable Suspension Fittings
TECNI®GRIP Type 15 Ceiling Attachment MG15-M6i
Code Fits Cable Diameter
(mm)
L1 (mm)
L2 (mm)
D1 (mm)
D2 D3 D4
(mm) D5
(mm) Weight
(g)
160.015.015 1.2 - 2.5 25.5 16 12.6 M10x1 Fine M6x1
Female 8.5 2.7 12.7
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two or more holders should be used for each suspension where possible. Eg. 5.0mm 7x7 galvanised cable Minimum
Breaking Load (MBL) = 1620kgs with a Type 50 TECNI®Grip. The Working Load Limit (WLL) = 1620/10 = 162kgs.
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 36
Back to contents page
Attractive, nickel-plated hook with micro-adjustable cable gripper mechanism (actual size)
For use with 1mm to 1.5mm, 7x7 and 7x19, cable
Cost effective fitting
Can be fitted easily on-site without specialist tools
Strong, reusable cable fitting with locking cap
Useful hook design
Excellent for cable display hanging applications such as for hanging signs or pictures
More than one hook can be fitted onto a single cable length.
Note: Not rated for lifting
TECNI®GRIP Type 15 Cable Suspension Fittings
TECNI®GRIP MG5L Nickel-Plated Hook Gripper
Code Fits Cable Diameter
(mm)
Length (mm)
Diameter (mm)
Hook Opening - Max Hanging
Material Diameter (mm)
MBL kgs
WLL kgs
Weight (g)
160.005.015 1–1.5 44 9 2.5 100 20 11.5
Attractive, nickel-plated, M6, female threaded micro-adjustable cable
gripper or glider
For use with 1mm to 1.5mm, 7x7 and 7x19, cable
Cost effective fitting
Can be fitted easily on-site
Secure screw down locking cap to prevent accidental release
Infinite adjustment with side exit
Excellent for cable display hanging applications.
Note: Not rated for lifting
TECNI®GRIP MG1-M6 Nickel-Plated M6 Female Gripper
Code Fits Cable Diameter
(mm) L1
(mm) D1
(mm) MBL kgs
WLL kgs
Weight (g)
160.006.060 1-1.5 42 10 100 20 15.1
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two
or more holders should be used for each suspension where possible.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 37
Hook and safety catch with micro-adjustable cable gripper mechanism (actual size)
For use with 1mm to 1.5mm diameter, 7x7 and 7x19, cable
Attractive nickel-plated finish
Cost effective fitting
Can be fitted easily on-site without specialist tools
Strong, reusable cable fitting
Useful hook design with safety catch
Excellent for cable display hanging applications such as hanging signs or
pictures
More than one hook can be fitted onto a single cable length.
Note: TECNI®Grips are not rated for lifting
TECNI®GRIP Type 15 Cable Suspension Fittings
TECNI®GRIP Type 15 Nickel Plated Hook Gripper Spring Catch
Code Fits Cable Diameter
L (mm)
P (mm)
W1 (mm)
W2 (mm)
MBL kgs
WLL kgs
Weight (g)
160.006.015 1–1.5 43.5 7.5 21.5 6.5 100 20 21
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two or
more holders should be used for each suspension where possible.
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 38
Back to contents page
Attractive, nickel-plated, M6 threaded micro-adjustable cable
gripper mechanism or glider (actual size)
For use with 1mm to 1.5mm diameters, 7x7 and 7x19, cable
Cost effective fitting
Can be fitted easily on-site
Secure screw locking cap to prevent accidental release
Infinite adjustment with side exit hole
Excellent for wide variety of cable display and hanging
applications.
Note: TECNI®Grips are not rated for lifting
TECNI®GRIP Type 15 Cable Suspension Fittings
TECNI®GRIP MG1-M6 Male Gripper
TECNI®GRIP M6 Female Ceiling Attachment
Code Fits Cable Diameter
(mm) L1
(mm) D1
(mm) MBL kgs
WLL kgs
Weight (g)
160.001.060 1-1.5 42 10 100 20 18.5
Attractive, nickel-plated, D-Type, nickel-plated M6 female ceiling attachment
For 1.2mm to 2 mm diameter, 7x7 and 7x19, cable
Cost effective fitting
Can be fitted easily on-site
Unscrew threaded base and fit stop to inside of dome fitting
Stops can be fitted in our factory or on site by using TECNI® Crimp Tool
(150.100.125)
Base is tapped M6 to secure to surfaces
Base is shown with M6 dual thread screw 160.040.060 but can be secured using
wood screws up to No. 10 size (4.76mm diameter)
Excellent for wide variety of cable display and hanging applications. Actual size
Note: TECNI®Grips are not rated for lifting
Code Fits Cable Diameter
(mm) L1
(mm) D1
(mm) MBL kgs
WLL kgs
Weight (g)
160.004.015 1.2—2 21 15 100 20 14.2
Important to note: TECNI®GRIP holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two
or more holders should be used for each suspension where possible.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 39
TECNI®GRIP Type 15 Holder BO3
Nickel-plated, TECNI®Grip Type 15 Holder B20 for 1mm-1.5mm cable
Very compact design and strong termination
Extremely rapid installation and no specialist tools needed
Simply fit and adjust by hand. To install, insert the cable into the
plunger and the cable is gripped by ball bearings inside the fitting for infinite adjustment
Reusable for future projects
Perfect for display and suspension applications such as shop
fittings, shelving, cable tensioning etc
For more details and a product video, please visit our website.
Versatile and adaptable, nickel-plated, TECNI®Grip Type 15 BO3 holder
for cable from 1mm-1.5mm.
Very compact design and strong termination
Extremely rapid installation
No specialist tools needed. Simply fit and adjust by hand
To install, insert the cable into the plunger and the cable is gripped by
ball bearings inside the fitting for infinite adjustment
Reusable for future projects
Designed for hanging anything with a flat surface that can be screwed
into or bolted through e.g. pictures in galleries, signs, display boards etc.
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm) A
(mm) B
(mm) C
(mm) D
(mm) Weight
(g)
193.000.146 1-1.5 10 16 2.5 20 20
Code Fits Cable Diameter
(mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
Weight (g)
193.000.147 1-1.5 24.6 20.6 16.6 9 9 3.2 10
TECNI®GRIP Type 15 Cable Suspension Fittings
TECNI®GRIP Type 15 Holder B20
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two
or more holders should be used for each suspension where possible.
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 40
Back to contents page
TECNI®GRIP Type 15 Holder Hook
Smart, compact, nickel-plated TECNI®Grip hook for cable
from 1mm-1.5mm
Extremely rapid installation
Reusable for future projects
Very compact design and strong termination
No specialist tools needed
Simply fit and adjust by hand. To install, simply insert the
cable into the plunger and the cable is gripped by ball bearings inside the fitting for infinite adjustment
Perfect for suspension applications such as light fittings,
shelving, cable tensioning etc. For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm) A
(mm) B
(mm) C
(mm) D
(mm) E
(mm) Weight
(g)
193.000.163 1-1.5 9.5 29.6 5.5 10 15.8 9
TECNI®GRIP Type 15 Cable Suspension Fittings
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two or
more holders should be used for each suspension where possible.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 41
Versatile and adaptable Type 15, nickel-plated TECNI®Grip fitting with M8
RH thread for cable from 1mm-1.5mm
Extremely rapid installation
Reusable for future projects
Very compact design & strong termination
No specialist tools needed
Attractive knurled finish
To install, simply insert the cable into the plunger & the cable is gripped
by ball bearings inside the fitting for infinite adjustment.
Perfect for applications such as shop fittings & display shelving.
Code Fits Cable Diameter
(mm) A
(mm) B
(mm) C
(mm) D
(mm) Weight
(g)
193.000.211 1-1.5 9.3 7 M8 23.6 8.3
TECNI®GRIP Type 15 Cable Suspension Fittings
TECNI®GRIP Type 15 Holder M6
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 42
Back to contents page
Unique, attractive, highly polished, chrome, Type 15 Ellipse
Tensioner
Designed for supporting 1mm - 1.5mm cables both vertically or
horizontally
Versatile and adaptable part
Forms a strong termination
Requires a stop ferrule end termination
Reusable for future projects
Simple to install—To install, crimp a stop ferrule to the end of
the cable (stop ferrule not supplied), insert cable through the centre of the cone - then screw cone down onto the threaded pillar. Screw the base onto a flat surface to tension (screws not supplied)
Perfect for display and suspension applications such as shop
fittings, shelving, cable tensioning etc.
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm) A
(mm) B
(mm) C
(mm) D
(mm) Weight
(g)
193.005.330 1-1.5 47 5.5 40 5 76
TECNI®GRIP Type 15 Cable Suspension Fittings TECNI®GRIP Type 15 Tensioner Ellipse
Code Fits Cable Diameter
(mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
Weight (g)
193.005.333 1-1.5 40 40 5 5.5 14 76
Unique, attractive, highly polished, chrome, Type 15 Ellipse
Holder
Designed for supporting 1mm - 1.5mm cables vertically or
horizontally
Extremely rapid installation—simply fit and adjust by hand.
Insert the cable into the plunger, out though the side exit, then screw onto a flat surface to tension (screws not supplied)
Reusable for future projects
Very compact design and strong termination
Perfect for display and suspension applications such as shop
fittings, shelving, cable tensioning etc. Note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and constructions that they fit. A 10:1 factor of safety should be applied for all suspension applications and a minimum of two or more holders should be used for each suspension where possible. Eg. 1.5mm 7x7 galvanised cable Minimum Breaking Load (MBL) = 145kgs with a Type 15 TECNI®Grip. The Working Load Limit (WLL) = 145/10 = 14.5kgs.
TECNI®GRIP Type 15 Holder Ellipse
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 43
TECNI®GRIP Type 15 Holder Ring
Smart and compact, Type 15, nickel-plated, TECNI®Grip holder ring
Fits cable from 1mm-1.5mm
Easy and extremely rapid installation. Simply fit and adjust by hand
- simply insert the cable into the plunger. The cable is gripped by ball bearings inside the fitting for infinite adjustment
Very compact design and strong termination
Reusable for future projects
Perfect for display and suspension applications such as shop
fittings, shelving, cable tensioning etc.
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm) A
(mm) B
(mm) C
(mm) D
(mm) E
(mm) Weight
(g)
193.000.174 1-1.5 10 30.6 4 18 10 9
TECNI®GRIP Type 15 Cable Suspension Fittings
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two or
more holders should be used for each suspension where possible.
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 44
Back to contents page
TECNI®GRIP Type 30 Holder Jaw MRSV
Versatile, internally threaded, M8x8 MRV TECNI®Grip fitting
For use with 2-3mm cable
Nickel-plated with attractive knurled finish
Fit and adjust by hand —simply insert cable into plunger. The cable is
gripped by ball bearings inside the fitting for infinite adjustment
Reusable for future projects
Very compact design with strong termination
Ideal for display and suspension applications such as shop
fittings, shelving, cable tensioning, etc
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm) Thread
A B
(mm) C
(mm) D
(mm) Thread
E F
(mm) Weight
(g)
193.000.301 2-3 M7 44.3 37.3 8.3 M8 15.3 37
Versatile, M7 threaded, compact TECNI®Grip fitting with jaw
For use with 2-3mm cable
Nickel-plated with attractive knurled finish
Fit and adjust by hand —simply insert cable into plunger. The
cable is gripped by ball bearings inside the fitting for infinite adjustment
Reusable for future projects
Very compact design with strong termination
Removable pin
Ideal for display and suspension applications such as shop
fittings, shelving, cable tensioning, etc
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm)
Thread A
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
G (mm)
Weight (g)
193.000.324 2-3 M7 20 36 56 88 9.7 20 132
TECNI®GRIP Type 30 Cable Suspension Fittings
TECNI®GRIP Type 30 Holder M8x8 MRV
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 45
TECNI®GRIP Type 30 Holder Ring
Versatile, internally threaded, M8 TECNI®Grip fitting
For use with 2-3mm, 7x7 and 7x19 cable
Hinged attachment to allow articulation of cable through 180°
Nickel-plated with attractive knurled finish
Fit and adjust by hand —simply insert cable into plunger. The
cable is gripped by ball bearings inside the fitting for infinite adjustment
Reusable for future projects
Very compact design with strong termination
Ideal for display and suspension applications such as shop
fittings, shelving, cable tensioning, architectural assemblies, balustrading etc
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm) Thread
A B
(mm) C
(mm) D
(mm) Thread
E Weight
(g)
193.000.346 2-3 M7 87 80 10 M8 96
Versatile, internally threaded, M8 TECNI®Grip fitting
For use with 2-3mm, 7x7 and 7x19 cable
Nickel-plated with attractive knurled finish
Fit and adjust by hand —simply insert cable into plunger. The
cable is gripped by ball bearings inside the fitting for infinite adjustment
Reusable for future projects
Very compact design with strong termination
Ideal for display and suspension applications such as shop
fittings, shelving, cable tensioning, architectural assemblies
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm) A
(mm) B
(mm) C
(mm) D
(mm) Weight
(g)
193.000.318 2-3 61.8 7.6 42.5 27.2 69.5
TECNI®GRIP Type 30 Cable Suspension Fittings
TECNI®GRIP Type 30 Holder Hinged M8i MRSVZW
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 46
Back to contents page
Versatile, internally threaded M8 TECNI®Grip fitting
Nickel-plated with attractive knurled finish
For use with 2-3mm, 7x7 and 7x19 cable
Quick and easy installation—simply insert cable into plunger. The cable
is gripped by ball bearings inside fitting for infinite adjustment
No specialist tools needed
Reusable for future projects
Very compact design with strong termination
Ideal for display and suspension applications such as shop fittings,
shelving, cable tensioning etc.
For more details and a product video, please visit our website.
Code Fits Cable Diameter
(mm)
Thread A
Thread C D
(mm) E
(mm) F
(mm) G
(mm) Weight
(g)
193.000.330 2-3 M7 M8 24 52 60 16 62
TECNI®GRIP Type 30 Cable Suspension Fittings
TECNI®GRIP Type 30 Holder M8ix8 MRSVZW
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two
or more holders should be used for each suspension where possible.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 47
Heavy duty, Type 50, TECNI®Grip plunger attachment
Available in two finishes: SCV chrome-plated andSV black powder coated
For 4-5mm, 7x7 and 7x19 cable
Extremely rapid installation
No specialist tools needed, simply adjust by hand. Insert cable into plunger. Cable is gripped inside the
plunger by ball bearings for infinite adjustment
Reusable for future projects
Very compact design with strong termination
Removable pin
Perfect for suspending heavy and bulky items for display and lighting purposes such as theatre lighting and
props
Further details and a product video, available at http://www.teecni-cable.co.uk
TECNI®GRIP Type 50 Cable Suspension Fittings
TECNI®GRIP Type 50 Holder M12x30 SVC
Chrome-Plated and Black Powder-Coated
Code Finish Fits Cable Diameter A B
(mm)
Thread D Weight (g)
(mm) (mm) C (mm)
193.005.002 Chrome 4 - 5 50.5 33.5 M12 25 122
193.005.021 Black powder coating 4 - 5 50.5 33.5 M12 25 122
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two or more holders should be used for each suspension where possible. Eg. 5.0mm 7x7 galvanised cable Minimum
Breaking Load (MBL) = 1620kgs with a Type 50 TECNI®Grip. The Working Load Limit (WLL) = 1620/10 = 162kgs.
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 48
Back to contents page
TECNI®Grip Type 50 Holder M12 With Eyenut
TECNI®GRIP Type 50 Cable Suspension Fittings
Heavy duty, Type 50, TECNI®GRIP eyenut and plunger attachment
Available in two finishes: SVC chrome-plated and SV black powder coating
For 4-5mm, 7x7 and 7x19 cable
Extremely rapid installation with no specialist tools needed
Simply adjust by hand. Insert cable into plunger. Cable is gripped inside the plunger by ball bearings for
infinite adjustment
Reusable for future projects
Very compact design with strong termination
Perfect for suspending heavy and bulky items for display and lighting purposes such as theatre lighting and
props
Further details and a product video, available at www.tecni-cable.co.uk
Code Finish Fits Cable Diameter
(mm)
A (mm)
B (mm)
C (mm)
D (mm)
Weight (g)
193.005.003 Chrome-plated 4-5 86.5 54 30 - 285
193.005.035 Black powder coated 4-5 15.2 86.5 54 30 285
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and con-structions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two or more holders should be used for each suspension where possible. Eg. 5.0mm 7x7 galvanised cable Minimum
Breaking Load (MBL) = 1620kgs with a Type 50 TECNI®Grip. The Working Load Limit (WLL) = 1620/10 = 162kgs.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 49
Heavy duty, Type 50, TECNI®Grip jaw and plunger attachment
Available in two finishes: Chrome-plated and black powder coating
For 4-5mm, 7x7 and 7x19 cable
Extremely rapid installation— Insert cable into plunger.
Cable is gripped inside the plunger by ball bearings for infinite adjustment
Reusable for future projects
Very compact design with strong termination
No specialist tools needed, simply adjust by hand
Removable pin
Perfect for suspending heavy and bulky items for display and lighting
purposes such as theatre lighting and props
Further details and a product video, available at ww.TECNI®Cable.co.uk
TECNI®GRIP Type 50 Cable Suspension Fittings
TECNI®Grip Type 50 Holder M12 SVC Jaw 14x28 Chrome-Plated
And SV 14x20 Black
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and constructions they fit.. A 10:1 factor of safety should be applied for all suspension applications & a minimum of two or more holders should be used for each suspension where possible. Eg. 5.0mm 7x7 galvanised cable Minimum Breaking Load (MBL) = 1620kgs with
a Type 50 TECNI®Grip. The Working Load Limit (WLL) = 1620/10 = 162kgs.
Code Fits Cable Diameter
(mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
Weight (g)
193.005.004 4-5 15.2 25 105 27 28 14.3 355
193.005.024 4-5 15.2 25 105 27 28 14.3 355
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 50
Back to contents page
Heavy duty, Type 80, black powder-coated, TECNI®Grip plunger
attachment
For 6-8mm, 7x7 and 7x19 cable
European manufactured
TUV approved
Extremely rapid installation— the cable is gripped inside the
plunger by ball bearings for infinite adjustment.
Reusable for future projects
Very compact design and strong termination
No specialist tools needed, simply adjust by hand
Has an M20 thread so will attach to any similarly threaded parts
such as eyenut and jaw attachments.
Perfect for suspending heavy and bulky items for display and
lighting purposes such as theatre lighting and props
Further details and a product video, available at www.tecni-
cable.co.uk
Code Fits Cable Diameter
(mm) A
(mm) B
(mm) C
(mm) D
(mm) Weight
(g)
193.009.003 6-8 87 57 M20 40 526
TECNI®GRIP Type 80 Cable Suspension Fittings
TECNI®GRIP Type 80 Holder M20x30
Important to note: TECNI®Grip holders are designed to be as strong as the range of cable diameters and constructions they fit. A 10:1 factor of safety should be applied for all suspension applications and a minimum of two or more holders should be used for each suspension where possible. Eg. 8mm 7x19 galvanised cable Minimum Breaking Load (MBL) = 4180kgs with a Type 80 TECNI®Grip. The Working Load Limit (WLL) = 4180/10 = 418kgs.
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 51
TECNI®Grip Black Type 80 Holder SV Jaw M20x30
Heavy duty, Type 80, black, powder-coated, TECNI®Grip eyenut and plunger attachment
For 6-8mm, 7x7 and 7x19 cable
European manufactured
Extremely rapid installation— the cable is gripped inside the plunger by
ball bearings for infinite adjustment.
Reusable for future projects
Very compact design and strong termination
No specialist tools needed, simply adjust by hand
Perfect for suspending heavy and bulky items for display and lighting
purposes such as theatre lighting and props
Further details and a product video, available at www.tecni-cable.co.uk
Heavy duty, Type 80, black, powder-coated, TECNI®Grip jaw and plunger
attachment
For 6-8mm diameter, 7x7 and 7x19, cable
European manufactured
Extremely rapid installation— the cable is gripped inside the plunger by
ball bearings for infinite adjustment.
Reusable for future projects
Very compact design and strong termination
No specialist tools needed, simply adjust by hand
The fitting has a removable pin making it perfect for suspending heavy &
bulky items for display and lighting purposes.
Further details and a product video, available at www.tecni-cable.co.uk
Important to note: TECNI®GRIP holders are designed to be as strong as the range of cable diameters and constructions they fit. A 10:1 factor of safety should be applied for all suspension applications and a minimum of two or more holders should be used for each suspension where possible. Eg. 8mm 7x19 galvanised cable Minimum Breaking Load (MBL) = 4180kgs with a Type 80 TECNI®GRIP . The Working Load Limit (WLL) = 4180/10 = 418kgs.
Code Fits Cable Diameter
(mm)
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
Weight (kgs)
193.009.005 6-8 20 40 162 40 40 20 1.222
Code Fits Cable Diameter
(mm) A
(mm) B
(mm) C
(mm) D
(mm) Weight (kgs)
193.009.004 6-8 20 160 39.5 17 9050
TECNI®GRIP Type 80 Cable Suspension Fittings
TECNI®Grip Type 80 Holder M20x30
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 52
Back to contents page
Swageless Fittings
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 53
A4-AISI 316, marine grade swageless stud terminal
Safe, reliable and machine free means of swaging wire
Highly corrosion resistant
Good strength in service
Easy to use
Ideal for site work where professional swaging would normally be required
Swageless Stud Terminal
Stainless Steel Swageless Threaded Stud Terminal
Code
Fits Cable Diameter G
L L1 L2 (mm)
W1 (mm)
W2 (mm)
MBL (kg)
Weight
(mm) (mm) (mm) (g)
3 M6 RH 85 63 47 12 10 750
4 M6 RH 92 63 47 14 12 1500
5 M8 RH 111 78 57 16 13 2180
6 M10 RH 128 90 63 19 16 3700
8 M12 RH 162 119 89 21 18 4700
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 54
Back to contents page
Swageless Eye Terminal
Stainless Steel Swageless Eye Terminal
A4-AISI 316, marine grade swageless eye terminal
Safe, reliable and machine free means of swaging wire
Highly corrosion resistant
Good strength in service
Easy to use
Ideal for site work where professional swaging would normally be required
Code
Fits Cable
Diameter (mm)
d (mm)
L (mm)
L1 (mm)
L2 (mm)
B (mm)
W1 (mm)
W2 (mm)
MBL (kg)
Weight (g)
3 6.3 58 50 26.5 7 12 10
750
4 8.3 68 58 31 8 14 13
1500
5 10.3 81 70 37 9 16 14
2180
6 12.3 97 83 45 12 19 17
3700
8 14.3 114 97.5 52.5 10 24 19
5600
Back to contents page
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 55
Swageless Fork Terminal
Stainless Steel Swageless Machined Folk Terminal
A4-AISI 316, marine grade swageless fork terminal
Safe, reliable and machine free means of swaging wire
Highly corrosion resistant
Good strength in service
Easy to use
Ideal for site work where professional swaging would normally be required
Code
Fits Cable Diameter D
(mm)
L L1 L2 (mm)
L3 (mm)
W1 (mm)
W2 (mm)
W3 (mm)
MBL (kg)
Weight
(mm) (mm) (mm) (g)
3 6 63 55 29 8 6 12 14 750
4 8 73 62 35 8 8 14 19 1500
5 10 83 72 42 10 10 16 22 2180
6 12 95 82 47.5 12 12 19 27 3700
8 14 118 103 58 14 14 24 30 5600
www.tecni.eu Tel: +44 (0) 1278 773510 / 0845 519 0650 Page 56
Back to contents page
Swageless Toggle Terminal
Stainless Steel Swageless Toggle Terminal
A4-AISI 316, marine grade swageless Toggle terminal
Safe, reliable and machine free means of swaging of wire
Highly corrosion resistant
Good strength in service
Quick and easy adjustment
Ideal for site work where a flexible wire attachment is required and there is risk of sideway load fatigue
Code
Fits Cable Diameter
L L1 L2 (mm)
H (mm)
W (mm)
D (mm)
MBL (kg)
Weight
(mm) (mm) (mm) (g)
105.010.703 3 71 50 15 14 8 6 750
105.010.704 4 90 61 19 18 10 8 1500
105.010.705 5 108 75 25.5 23 12 9.5 2180
105.010.706 6 125 88 28.5 30 15 11 3700
105.010.708 8 148 102 30 30 18 12.7 5600
Page 57
TECNI® CABLE LTD
5 Commerce Way
Walrow Industrial Estate
Highbridge
Somerset
TA9 4AG
United Kingdom
Tel: 01278 773510 / 0845 519 0650
Fax: 01278 773519
Email@ [email protected]
www.tecni-cable.co.uk
Copyright 2013
www.tecni.eu