This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
2 Drive(10GB)-Cluster disk 2Presented lun details-1 Drive(1GB)-QUROUM
ISCSI Server Details
Windows 2012 R2 Failover Cluster-Lab Guide
Server 2012 Page 1
Login to the cluster node 1/2Press Windows button on your keyboardType ISCSISelect ISCSI initiator
Connect ISCSI storage to the servers.1.
By default this service not started, therefore click on "yes" button for start the service
2 Drive(10GB)-Cluster disk 2
Server 2012 Page 2
Open "Server manager"
Click on "Tools"
Select "iSCSI Initiator"
Type the IP Address as a "Target" and click on "Quick Connect"
Now we can see the 1 GB quorum disk on the disk management console
Server 2012 Page 3
Format and mount quorum disk to the one host as a drive "Q"
Now we can see this disk in a both cluster nodes
Server 2012 Page 4
Adding failover cluster feature to the both cluster nodes2.
Open "Server Manager"
Click on "Manage"
Click on "Add Roles and Features"
Server 2012 Page 5
Click on "Next"
Select "Role-based or feature-based installation" and click on "Next"
Select the server name and click on "Next"
Server 2012 Page 6
Select "Failover Clustering" and Click on "Add Features", Click on "Next"
Click on "Install"
Now both of the servers are ready for creating a cluster
Open "Server Manager"
Click on "Tools"
Select "Failover Cluster Manager"
Server 2012 Page 7
On the "Failover cluster manager" mmc select "Create Cluster
Click on "Next"
Server 2012 Page 8
Browse and adding both cluster nodes(servers) to the wizard
Click on "Next"
Now we can validate the cluster, Select "yes" and click on "Next"
Click on "Next"
Server 2012 Page 9
Select "Run all tests" and click on "Next", This will check our configuration such as network,storage and system configuration
Click on "Next"
Server 2012 Page 10
Click on "View" and verify the report.
Click on "Finish"
Assign a cluster name.(testcls01)
Assign a cluster IP Address.(172.20.10.81)
Server 2012 Page 11
Select "Add all eligible storage to the cluster " and click on "Next"
Cluster has created successfully.
Click on "Finish"
Server 2012 Page 12
Open "Failover Cluster Manager"
Select "Nodes" and verify that all the nodes are available and status is "UP"
Verify and manage the cluster Configuration3.
Select "Disks" under "Storage" and verify that Quorum disk's availability
Server 2012 Page 13
Verify the network configuration4.
Open "Failover Cluster Manager"
Select "Networks"
There are three cluster networks will be available, as per the automatic configuration of this networks cluster and client communication will be disabled on the network which is using for ISCSI network. Also the network which is configured without gateway will be assigned to the cluster only(Internal cluster communication and cluster shared volume's traffic).Finally the network with gateway address will be configured as "Cluster and Client".
This procedure is same as quorum disk adding processAdd seconds shared drive to the cluster4.
Server 2012 Page 14
Once the disk is formatted and drive letter assigned we can add this to fail over cluster
Open "Failover Cluster Manager
Go to the "Storage", Select "Disks"
Click on "Add Disk"
Select the disk and click on "OK"
We have completely done our Server 2012 R2 cluster configuration. Now we can start provisioning services with high availability for our users and network. With server 2012 R2 all the configured services, applications will be shown under the "Roles" in failover cluster manager console. At the movement there are no any roles configured.
Configure roles in Windows 2012 R2 Failover Cluster5.
Open "Failover Cluster Manager"
Right click on the "Roles
Select "Configure Roles"
Server 2012 Page 15
Click on "Next"
Select "File Server" and click on next(We can select multiple server roles for provide the high availability)
Select "File Server for general use" and click on "Next"
Server 2012 Page 16
Assign a name and IP address for the file share cluster and click on "Next"
Select the available shared disk for store shared folders on this cluster
Click on "Next"
Server 2012 Page 17
Click on "Finish"
6. Add file share to the file server cluster
Open "Failover Cluster Manager"
Select "Roles"
Right click on the File server cluster name(fscluster)
Select "Add File Share"
Server 2012 Page 18
Select "SMB Share-Quick"
Select "F" Drive and click on "Next"
*If we want we can select different path which is in the shard drive also
Server 2012 Page 19
Assign a share name and description
Click on "Next"
Click on "Next"
Click on "Next"
*We can customize the sharing permission from this page
Server 2012 Page 20
*We can customize the sharing permission from this page
Click on "Create"
Now we can access the shared folder using cluster name or cluster ip address