Type : Wind Turbine Installation Vessel Wind Turbine Installation Vessel - “OceanTec 1” Type : Wind Turbine Installation Vessel Vessel Name : ‘OceanTec 1’ Hull No : J006 Flag : Singapore Cl A i B f Shi i (ABS) Cl ifi ti “? A1 S lf El ti D illi U it AMS Class : American Bureau of Shipping (ABS) Classification “? A1, Self-Elevating Drilling Unit, AMS, ACCU, DPII” Owner : Teras Pneuma Pte. Ltd. Builder : Nantong Jiaolong Heavy Industry Development Co., Ltd Designer : Bennett & Associates Naval Architects & Marine Engineers JHI Singapore Pte. Ltd. Country of Build : China Completion : 3 rd Quarter 2013 Picture shown is vessel in Oil & Gas Mode Completion : 3 rd Quarter 2013 Length : 72.00 m, 75.75m including thruster appendage. Breath : 38.00 m Depth : 7.00 m L d Li D ft 40 Load Line Draft : 4.0 m Dist. Fwd to Aft Legs : 40 .00 m Dist. Port to Stbd Legs : 30.00 m No of Tubular Legs : 4 Leg Length : 95 m Diameter of Legs : 3.66 m Accommodation : 58 persons in single cabins or 106 persons in single/double cabins. All cabins above Main Deck Helicopter Deck (optional) : Designed for Sikorsky S-61/S-92 Freshwater Tanks : 470 m 3 Potable Water Tanks : 500 m 3 Fuel Oil Tanks : 460 m 3 Buffer Tank : 94 m 3 Dirty Oil Tank : 51 m 3 The information contained in this brochure may contain information that is privileged, confidential and exempt from disclosure under applicable law and is intended only for the use of the individual or entity to whom they are addressed or sent to. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this presentation is strictly prohibited. Dirty Oil Tank : 51 m Contaminated Drain Tank : 56 m 3 Trimming Tanks : 1170 m 3 (*no preload tanks are required)
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Type : Wind Turbine Installation Vessel
Wind Turbine Installation Vessel - “OceanTec 1”Type : Wind Turbine Installation VesselVessel Name : ‘OceanTec 1’Hull No : J006Flag : SingaporeCl A i B f Shi i (ABS) Cl ifi ti “ A1 S lf El ti D illi U it AMSClass : American Bureau of Shipping (ABS) Classification “ A1, Self-Elevating Drilling Unit, AMS,
ACCU, DPII”Owner : Teras Pneuma Pte. Ltd.Builder : Nantong Jiaolong Heavy Industry Development Co., Ltdg g y y pDesigner : Bennett & Associates Naval Architects & Marine Engineers
JHI Singapore Pte. Ltd.Country of Build : ChinaCompletion : 3rd Quarter 2013
Picture shown is vessel in Oil & Gas ModeCompletion : 3rd Quarter 2013Length : 72.00 m, 75.75m including thruster appendage.Breath : 38.00 mDepth : 7.00 mL d Li D ft 4 0Load Line Draft : 4.0 mDist. Fwd to Aft Legs : 40 .00 mDist. Port to Stbd Legs : 30.00 mNo of Tubular Legs : 4Leg Length : 95 mDiameter of Legs : 3.66 mAccommodation : 58 persons in single cabins or 106 persons in single/double cabins. All cabins above Main DeckHelicopter Deck (optional) : Designed for Sikorsky S-61/S-92Freshwater Tanks : 470 m3Potable Water Tanks : 500 m3Fuel Oil Tanks : 460 m3Buffer Tank : 94 m3 Dirty Oil Tank : 51 m3
The information contained in this brochure may contain information that is privileged, confidential and exempt from disclosure under applicable law and is intended only for the use of the individual or entity to whom they are addressed or sent to. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this presentation is strictly prohibited.
Dirty Oil Tank : 51 mContaminated Drain Tank : 56 m3 Trimming Tanks : 1170 m3 (*no preload tanks are required)
Wind Turbine Installation Vessel - “OceanTec 1”
Lifting Equipment:One (1) Pedestal Mounted Crane (certified in accordance with ABS Guide for Cranes) with 75m boom:Main Hook @ 600MT @ 17~22m radius and 200MT @ 55m radius;Whip Hoist @ 40MT certified for man-ridingWhip Hoist @ 40MT certified for man riding.Lifting height of 145m above water level in 40m of water depth with 3m leg penetration.One (1) Articulating Arm Crane :Main Hook @ 600kg @ radius of 25m.One (1) Retractable Walkway/Gangway:One (1) Retractable Walkway/Gangway:Extension of walkway up to 25m from side shell of vessel.Electric Rack & Pinion Jacking System:Total Normal Jacking Capacity of 7760MT.1 2 m/min for jacking with load1.2 m/min for jacking with load.2.4 m/min for jacking without load.Propulsion & Positioning System:Three (3) 1000KW Azimuth thrusters and Three (3) 600KW Bow Tunnel thrusters driven by VFD technologyby VFD technology.9 knots travel speed, DP II Capabilities.Main and Auxiliary Engines:Four (4) sets of main diesel engine each rated at 1820eKW; total of 7,280eKW.One (1) unit of emergency diesel engine rated at 550eKW
Main deck clear area of 1400m2 with 10MT/m2 and 7.5MT/m2 deck loadingOne (1) unit of emergency diesel engine rated at 550eKW.Design Loads:Total Elevated Weight of Vessel 6800MTTotal Variable Load 2600MTDeck Load 2150MTDeck Load 2150MTMain Deck Loading 7.5MT/m2 ; 10.0MT/m2Design Temperatures:Steel Structure Design Temperature -20 Deg CMin Air Temperature -10 Deg C 2.4m above Main Deck Platform forMin Air Temperature 10 Deg CMax Air Temperature +45 Deg C 2.4m above Main Deck Platform for
Storage of Wind Turbine Blades
The information contained in this brochure may contain information that is privileged, confidential and exempt from disclosure under applicable law and is intended only for the use of the individual or entity to whom they are addressed or sent to. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this presentation is strictly prohibited.
Wind Turbine Installation Vessel - “OceanTec 1”
Safety Systems/Equipment:Vessel is equipped with fire detection and fire-fighting systems in accordance with MODU requirements.All accommodation areas protected by a sprinkler system.Vessel is equipped with 2 x 106 men fully enclosed lifeboats and 1 x 300HP MOB rescue boat meeting SOLAS requirements.5 x 25 persons life rafts shall be installed at port and stbd of vessel.Accommodation:Vessel has 58 single man cabins including dedicated cabins for senior officers . 48 single man cabins are convertible to double man cabins to provide 106 berths if required.All cabins are located above Main Deck Level and have natural light.Vessel is also equipped with Galley, Mess Rooms, Recreational Rooms, Linen Lockers Offices, Meeting Rooms, Gym, Laundry Room, Change Room and a 2 bedded Hospital.Vessel is also equipped with a Store and Workshop.Machinery Systems:Vessel has a Zero Discharge System with an Oily Water Separator System installed.Vacuum Sewage Treatment Plant for Grey and Black Water.Fuel Oil Purifier.Reverse Osmosis Water Maker.Control Systems:A Vessel Management System will be installed in accordance to ACCU requirements and also operational requirements.Main Control Station is located on the Bridge Deck located on the 3rd level of the Port Accommodation Tower.Secondary Control Station is located on Main Deck beside the 600MT Crane Pedestal.
The information contained in this brochure may contain information that is privileged, confidential and exempt from disclosure under applicable law and is intended only for the use of the individual or entity to whom they are addressed or sent to. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this presentation is strictly prohibited.
Wind Turbine Installation Vessel - “OceanTec 1”
Survival and Operating Conditions:@ Storm Survival @ 36.01 m/s Wind @ 23.15 m/s Wind @ Operating ConditionWind Speed 51.44 m/s 36.01 m/s 23.15 m/s 18.52 m/sWater Depth 30m 30m 50m 50mAir Gap 15m 15m 27m 27mLeg Penetration 3m 3m 3m 3mCurrent 1.54 m/s 1.54 m/s 1.03 m/s 1.03 m/sWave Height 16.5m 17.4m 7.0m 8.0mWave Period 13 3 14 0 6 7 7 1Wave Period 13.3 secs 14.0 secs 6.7 secs 7.1 secsVariable Load Partial Partial Full Load Full LoadCrane Operations Not Allowed Not Allowed Not Allowed Up to Max Wind Speed of 20 m/sV l b i i d d j k d f l d i i l 2 i ifiVessel can be positioned and jacked up for preload operations in at least 2m significant wave height, 1.03 m/s current , in water depths up to 50m and 18.52 m/s wind .
The information contained in this brochure may contain information that is privileged, confidential and exempt from disclosure under applicable law and is intended only for the use of the individual or entity to whom they are addressed or sent to. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this presentation is strictly prohibited.
Related Documents
