© Power Line Sentry, LLC www.powerlinesentry.com ph: 970-599-1050 Wildlife Mitigation Products — Insulating Devices Page 19 © Power Line Sentry, LLC www.powerlinesentry.com ph: 970-599-1050 69 kV Conductor Cover Our patented insulator cap and conductor cover is designed to cover vertical insulators 69 kV applica- tions. The product was designed to protect against brush contact outages on sub-transmission lines. Specifications Extended service life made of UV resistant RPVC Secure even in high winds (> 85 mph) for sustained periods Covers only the energized portion of insulators, al- lowing the insulator skirts to naturally clean, (as they are designed to do), and for the insulators to be easily viewed during line inspection. Fits conductor sizes #6 through 795 mcm Models for dead-ends, single and double insulators Product Number Description Box Qty CC-STT-VT-69 Single Insulator and Rigid Conductor Cover (4/0 to 477 mcm) wire. Fits larger 69 kV insulators including trunion mount 10 CC-DTT-VT-69 Double Insulator and Rigid Conductor Cover (4/0 to 477 mcm) wire. Fits lar- ger 69 kV insulators including trunion mount 5 CC-FLEX-69V-XXX Double Insulator and Silicone Hose Conductor Cover wire. Fits larger 69 kV insulators including trunion mount. Silicone hose good for 25 kV brush con- tact. Call for proper sizing of hose to meet wire size. 5 CC-DTT-VT-69-HD Double Insulator and Rigid Conductor Cover (500 to 795 mcm) wire. Fits lar- ger 69 kV insulators including trunion mount 5 CC-STT-VT-69-HD Single Insulator and Rigid Conductor Cover (500 to 795 mcm) wire. Fits lar- ger 69 kV insulators including trunion mount 10 © Power Line Sentry, LLC www.powerlinesentry.com ph: 970-599-1050