AAA with Active Directory Example One MT setup Windows Setup Example Two Part A - Setup IAS RADIUS on Active Directory Services Página 1 de 18 AAA with Active Directory - MikroTik Wiki 07/04/2011 http://wiki.mikrotik.com/wiki/AAA_with_Active_Directory
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
AAA with Active Directory
Example One
MT setup
Windows Setup
Example Two
Part A - Setup IAS RADIUS on Active Directory Services
Página 1 de 18AAA with Active Directory - MikroTik Wiki
Create a “hotspot.com” client profile and set IP address pointing to MikroTik hotspot server 172.19.1.253. Set Client Vendor to RADIUS Standard and enter a unique password for IAS. Do not enable Attributes Signature check box.
Página 6 de 18AAA with Active Directory - MikroTik Wiki
Add a RADIUS server profile and enable service for “hotspot”. Enter IP Address of IAS RADIUS server. Enter the same password created earlier for RADIUS secret. Use port 1812 for Authentication and 1813 for Accounting with Timeout at 300ms.
At “Hotspot Server Profiles” Login By check “HTTP PAP” only.
Página 13 de 18AAA with Active Directory - MikroTik Wiki
At “Hotspot Server Profiles” check Use RADIUS and Accounting. NAS Port Type leave it as (19 wireless-802.11) or(Ethernet) mode.
Part C – Testing IAS RADIUS with PC
Use NTRadPing Test Utility to verify the communication link with a test PC. http://www.dialways.com/download/1.Remember to add in the test PC IP Address intended for testing into the IAS Client Profile before initiating test. 2.
Página 14 de 18AAA with Active Directory - MikroTik Wiki