White House Products Ltd · 2015-08-18 · Issue 5 - Section 23 Char-Lynn Motors International +44 1475 742500 UK 0800 130 3103 [email protected] Fax +44 1475 742888 White House Products

Issue 5 - Section 23 Char-Lynn Motors

International +44 1475 742500 UK 0800 130 3103 [email protected] Fax +44 1475 742888

White House Products Ltd

White House Products Ltd, Kelburn Business Park, Port Glasgow, Renfrewshire, PA14 6TD, Great Britain

To view a gear pump, please click on the name below or use the bookmarks in your PDF software. To return to this page, please click on the red text in the top corner of each page.

Introduction and Contact Details

J Series 325-326

H Series 327-330

S Series 330-332

T Series 330, 333-4

2,000 Series 335-337

4,000 Series 338-339

6,000 Series 340-341

10,000 Series 342-343

mailto:sales%40whp.co.uk?subject=

http://www.whp.co.uk

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Standard-Gear-Pumps.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Tractor-PTO-Pump-and-Gearbox-Combinations.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Tailor-Made-Gear-Pumps.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Pump-Drives-and-Couplings.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Non-Standard-Pumps.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Standard-Gear-Motors.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Non-Standard-Gear-Motors.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Vane-Pumps-and-Motors.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Standard-Piston-Pumps.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Non-Standard-Piston-Pumps.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Standard-Piston-Motors.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Non-Standard-Piston-Motors.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Tailor-Made-Power-Packs.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Control-Valves.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Double-Divertor-Valves.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Spool-Valves-Bankable-and-Monoblock.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Remote-Control-Cables.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Cetop-3-and-5-Control-Valves.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Cetop-3-and-5-Valve-Modules.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Cetop-3-and-5-Manifold.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-High-Torque-Motors.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Hydraulic-Motor-Reduction-Units.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Char-Lynn-Motors.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Parker-T-Series-Motors.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-UFI-Filters.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Cylinders-and-Rams.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Hose-Assembly-Equipment.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Hoses.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Hose-Fittings.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Adaptors-and-Bonded-Seals.pdf

HTTP://www.WhiteHouseproductsLtd.com/catalogue/WHP5-Full-Catalogue.pdf

http://www.whitehouseproductsltd.com/request-catalogue.aspx

Our promise to you...

• That over 90% of orders are delivered from stock!• That all UK back orders are delivered FOC.• That all stocked UK single pump and motor orders not requiring

modification ordered before 4pm will be dispatched the SAME DAY.• That any part supplied by us in error and unused by you will be

collected by our courier from you and credited in full - inclusive of any carriage and packing costs - on its return.

• That any part ordered in error by you and returned to us as new will be credited in full against the correct replacement supplied by us.

• That we shall try our very best at all times to provide you with what you want.

• That if we don’t have a particular pump or motor in stock we will offer to manufacture a replacement where this is possible.

Ex-Stock Availability

All items shown in this catalogue are stock items and therefore normally available for immediate despatch.

Welcome to the White House Products Ltd Catalogue

By whatever means you use, we look forward to hearing from you!

Enquiries, Pricing & Ordering

Telephone UK 0800 130 3103 International +44 1475 742500

Fax - +44 1475 742888

e-mail - [email protected]

Postal Address White House Products Ltd

Kelburn Business Park, Port Glasgow, Renfrewshire, PA14 6TD, Great Britain

Prices and secure online ordering at www.whp.co.uk

To obtain prices from our website you need to have a username and password. If you don't have these, please register by going to www.whp.co.uk and clicking on Register. You will get a username and password by return.

Internet ordering can be done using a credit account, if this has already been set up, or by credit card. To provide total security to our credit card customers, payments are transacted using Sage Pay's secure server.

Char

-Lyn

n M

otor

sChar-Lynn Motorsclick here to return to front page



J Series - Ordering Code

Use this chart to compile your ordering code. For example: 6CM/129- 0306 (31.6 cc/rev displacement, End Port Motor, ø31.47, 5.1, Pilot, 5 x M6 x 1, Mounting Holes on 45mm ø bolt circle, M14 x 1.5- 6H O-ring (2) Port and 16mm straight shaft)

Char-Lynn J Series - Ordering Code

6CM/129- &&&&

&&&& J Series Code Displacement - cc/rev [in3/rev]Port Location Mounting Flange Port Size Shaft 8.2 [0.50] 12.9 [0.79] 19.8 [1.21] 31.6 [1.93] 50 [3.0]

End Port Motors

ø 31.47, 5.1 Pilot, 5 x 1/4"- 28 UNF Mounting Holes on 45mm ø bolt circle (12.7mm deep)

9/16”-18 UNF 2B O Ring (2)

5/8” Straight 0291 0292 0293 0294 / 0004 * 045811/16” Straight 0295 0296 0297 0298 0459Splined - Metric 0299 0300 0301 0302 04603/4” Tapered 0480

ø31.47, 5.1, Pilot, 5 x M6 x 1, Mounting Holes on 45mm ø bolt circle

M14 x 1.5- 6H O Ring (2)

16mm straight 0303 0304 0305 0306 046118mm Straight 0307 0308 0309 0310 0462Splined - Metric 0311 0312 0313 / 0051 ¶ 0314 0463

G 1/4” (BSP) (2)16mm straight 0315 0316 0317 0318 046418mm Straight 0319 0320 0321 0322 0465Splined - Metric 0323 0324 0325 0326 0466

G 3/8” (BSP) (2)16mm Straight 0327 0328 / 0114 § 0329 0330 / 0116 § 046718mm Straight 0331 0332 0333 0334 0468Splined - Metric 0335 0336 0337 0338 0469

ø62.99, Pilot 10.36mm, 2 x Mounting Holes on 80mm ø bolt circle

G 1/4” (BSP) (2)16mm straight

G 3/8” (BSP) (2)ø62.99, Pilot 9mm, 2 x Mounting Holes on 80mm ø bolt circle

G 1/4” (BSP) (2)16 mm Straight

0105 § 0108 §G 3/8” (BSP) (2) 0117 § 0120 §

Side Port Motors

ø31.47, 5.1 Pilot, 5 x 1/4"-28 UNF Mounting Holes on 45mm ø bolt circle (12.7mm deep)

9/16”- 18 UNF 2B O Ring (2)

5/8” Straight 0339 / 0017 * 0340 / 0018 * 0341 0342 047011/16” Straight 0343 0344 0345 0346 0471Splined - Metric 0347 0348 0349 0350 04723/4” Tapered 0481

ø31.47, 5.1, Pilot, 5 x M6 x 1, Mounting Holes on 45mm ø bolt circle

M14 x 1.5- 6H O Ring (2)

16mm straight 0351 0352 0353 0354 047318mm Straight 0355 0356 0357 0358 0474Splined - Metric 0359 0360 0361 0362 0475

G 1/4” (BSP) (2)16mm straight 0363 0364 0365 / 0027 § 0366 047618mm StraightSplined - Metric 0367 0368 0369 0370 0477

G 3/8” (BSP) (2)16mm straight 0371 / 0021 § 0372 / 0022 § 0373 / 0023 § 0374 / 0024 § 040318mm Straight 0375 0376 0377 0378 0478Splined - Metric 0379 0380 0381 0382 0479

ø62.99, Pilot 9mm, 2 x Mounting Holes on 80mm ø bolt circle

G 3/8” (BSP) (2) 16mm straight 0103 § 0410 §G 3/8” (BSP) (2) 18mm Straight 0483 §

ø62.99, Pilot 10.36mm, 2 x Mounting Holes on 80mm ø bolt circle

9/16”-18 UNF 2B O Ring (2) 5/8” Straight 0545 *

* 3/8”-24 UNF Case Flow § G 1/8” BSP Case Flow ¶ M10 Case Flow

For prices, please register online or contact us by phone, fax or email.

325325

Char

-Lyn

n M

otor

s

Char-Lynn Motors click here to return to front page

www.whp.co.uk International +44 1475 742500 UK 0800 130 3103 [email protected] Fax +44 1475 742888



J Series - Specification Drawing

Char-Lynn J Series - Specifications, Mounting Flange and Shafts

J Series - Shaft Type all measurements are in millimetres (mm) unless otherwise stated

J Series - Mounting Flange Typeall measurements are in mm unless otherwise stated

J Series - Specifications*

Displacement cc/rev 8.2 12.9 19.8 31.6 50in3/rev 0.50 0.79 1.21 1.93 3.00

Max. Speed @ Continuous Flow rpm 1992 1575 1043 650 393

Flow - Continuousl/min 17 21 21 21 21gpm 4.5 5.5 5.5 5.5 5.5

Flow - Intermittentl/min 21 25 25 25 25gpm 5.5 6.5 6.5 6.5 6.5

Torque - ContinuousNm 16 25 38 50 62lb-in 141 225 333 446 549

Torque - IntermittentNm 19 30 46 62 84lb-in 164 263 405 546 743

Torque - PeakNm 22 36 48 83 86lb-in 193 321 425 733 765

Pressure Drop - ContinuousBar 140 140 140 121 97Psi 2030 2030 2030 1750 1400

Pressure Drop - IntermittentBar 165 165 165 150 140Psi 2400 2400 2400 2175 2030

Pressure Drop - PeakBar 220 220 220 190 150Psi 3190 3190 3190 2756 2175

16mm Straight Keyed (Max. torque Continuous Duty 39 Nm)

5/8" Straight Keyed (Max. torque Continuous Duty 39 Nm)

18mm Straight Keyed (Max. torque Continuous Duty 58 Nm)

11/16" Straight Keyed (Max. torque Continuous Duty 52 Nm)

Involute 9T Splined - Metric (Max. torque Continuous Duty 44 Nm)

5/8" Straight Keyed with crosshole (Max. torque Continuous Duty 39 Nm)

3/4" Tapered (Max. torque Continuous Duty 68 Nm)

36.1 / 34.0

36.1 / 34.0 36.1 / 34.0 36.1 / 34.0

36.1 / 34.0 50.8 / 49.38.9 / 7.136.1 / 34.0

ø4.82 / ø4.754.78 4.78

5x5x18 6x6x18

4.76 x 15.75

26.2 max.

26.2 max.

26.2 max.

26.2 max.

14 max.

26.2 max.

24.6 max.4.763 / 4.686 4.763 / 4.686

5.00 / 4.97 6.00 / 5.97

4.788 / 4.762

2.52 / 2.26

ø15.88 / ø15.85

ø16.000 / ø15.974 ø18.001 / ø17.975 ø16.51 / ø16.48

ø15.88 / ø15.85ø17.475 / ø17.450

17.996 / 17.717

18.000 / 17.959 20.501 / 20.369

19.622 / 19.342 ø3.2

ø19

B17x14 DIN 5482

72.9

97.3 / 96.8

5.61 / 5.362.24 / 1.83

5.61 / 5.36

ø63.04 / ø62.94

80.26 / 79.76

Spool DriveSpacer Plate

Valve Spool

Check ValvesO Ring Seals (3)

Thrust Washer

Bearing HousingCap Screws (5)

Bushing

Thrust Bearing

Valve Housing

Optional Case Drain (shown with shipping plug)

Geroler®DriveShaft SpacerPressure Seal

Exclusion Seal

Output Shaft

10.2 / 9.7


* Continuous Rating. Motor may be run continuously at these ratings.

Intermittent Operation. 10% of every minute.

Peak Operation. 1% of every minute.

Splined Shafts and Frequent Reversals. Splined Shafts are recommended for those applications subject to frequent reversals.

326326

Char

-Lyn

n M

otor





H Series - Ordering Code

Use this chart to compile your ordering code. For example: 6CM/101- 1033 (46 cc/rev displacement, 2 Bolt Standard Mount, 82.5 ø, pilot 13.59, mounting holes on 106.35 ø bolt circle, 1” straight with Woodruff Key Shaft, 7/8" - 14 O-Ring Port)

Char-Lynn H Series - Ordering Code For prices, please register online or contact us by phone, fax or email.

&&&& H Series Code Displacement - cc/rev [in3/rev]Mounting Flange Shaft Ports 36

[2.2]46 [2.8]

59 [3.6]

74 [4.5]

97 [5.9]

120 [7.3]

146 [8.9]

159 [9.7]

185 [11.3]

231 [14.1]

293 [17.9]

370 [22.6]

740 [45.1]

2 Bolt Standard Mount, 82.5 ø, pilot 13.59, mounting holes on 106.35 ø bolt circle.

1” straight with Woodruff key

7/8”-14 O-Ring 1700 ƒ 1033 1701 ƒ 10343045 * VS

10352104 π 1702 1703

2171 * 1036 1037 1038 1039 1040

1/2” NPTF 1704 1025 1705 1026 1027 1706 1707 1028 1029 1030 10311199

10321296

Manifold (UNC) 1708 1041 1709 1042 1043 1710 1711 1044 1045 1046 1047 10483/4”-16 End portedMetric Manifold (M8)

G 1/2” BSP O-ring 1716 ƒ 1596 §2155 1597 § 1598 § 1719 §

1” SAE 6B Splined

7/8”-14 O-Ring 17213603 ƒ HP 1081 1722 1082 1083 1723 1724 1084 1085 1086 1087 1088

1/2” NPTF 1725 1073 1726 1074 1075 1727 1728 1076 1077 1078 1079 1080Manifold (UNC) 1729 1089 1730 1090 1091 1731 1732 1092 1093 1094 1095 10963/4”-16 End ported7/8”-14 O-ringMetric Manifold (M8) 1627 §

G 1/2” BSP O-ring1631 §2610 § HP3094 A HP

1633 §

1” Straight with ø31 Crosshole

7/8”-14 O-Ring 1796 1797 1798 1799 1800 1801 1802 18031/2” NPTF 1804 1805 1806 1807 1808 1870 1809 1810Manifold (UNC) 1811 1812 1813 1814 1815 1816 1817 18183/4”-16 End ported7/8”-14 O-ring 2072 *Metric Manifold (M8)G 1/2” BSP O-ring


7/8”-14 O-Ring 1819 1323 1820 1324 1325 1821 1822 13261/2” NPTF 1823 1319 1824 1320 1825 1826 1827 1828/1179Manifold (UNC) 1829 1463 1830 1831 1832 1833 1834 18713/4”-16 End ported7/8”-14 O-ringMetric Manifold (M8)G 1/2” BSP O-ring

7/8” 13 Tooth Spline SAE B

7/8”-14 O-Ring1/2” NPTF 2085 *Manifold (UNC)3/4”-16 End ported7/8”-14 O-ringMetric Manifold (M8)G 1/2” BSP O-ring

1” SAE J501 Tapered

7/8”-14 O-Ring1/2” NPTFManifold (UNC)3/4”-16 End ported7/8”-14 O-ringMetric Manifold (M8)G 1/2” BSP O-ring

25mm Straight

Metric Manifold (M8) 1656 § 1658 §

G 1/2” BSP O-ring 1745 §/ƒ 1660 § 1746 §/ƒ 1661 § 1662 §

2125 § 1748 §1663 §2148 §2592 HP

1664 § 1665 § 1666 §

* Includes case drain 7/16”-20 (EC) § Includes case drain G 1/4” BSP (EC) ¶ Special Feature- Low Speed ƒ Special Feature-Free Runnningπ Flange Rotated 90° A Internal Check Valves HP High Pressure Shaft Seal VS Viton Shaft Seal

6CM/101- &&&&Please see codes in green boxes below and on right

327327

Char

-Lyn

n M

otor

s





H Series - Ordering Code (continued)

Char-Lynn H Series - Ordering Code continued For prices, please register online or contact us by phone, fax or email.

* Includes case drain 7/16”-20 (EC) § Includes case drain G 1/4” BSP (EC) ¶ Special Feature- Low Speed ƒ Special Feature-Free Runnningπ Flange Rotated 90° A Internal Check Valves HP High Pressure Shaft Seal VS Viton Shaft Seal

&&&& H Series Code Displacement - cc/rev [in3/rev]Mounting Flange Shaft Ports 36

[2.2]46 [2.8]

59 [3.6]

74 [4.5]

97 [5.9]

120 [7.3]

146 [8.9]

159 [9.7]

185 [11.3]

231 [14.1]

293 [17.9]

370 [22.6]

740 [45.1]

4 Bolt Standard Mount, 44.4 dia., pilot 3.05, UNC-2B mounting holes on 82.55 dia bolt circle.

1” straight with Woodruff key

7/8”-14 O-Ring 1749 10092769 * HP 1750 1010 1011

2646 HP 1751 1752 1012 10132687 HP 1014 1015

2654 HP 1016

1/2” NPTF 1753 1001 1754 1002 1003 1755 1756 1004 1005 1006 1007 1008Manifold (UNC) 1757 1017 1758 1018 1019 1579 1760 1020 1021 1022 1023 1024

3/4”-16 End ported 15232036 * 2024

7/8”-14 O-ring 1512 * 1750 ƒ 2116 * 2180 * 1751

Metric Manifold (M8) 1574 §2546 3098

G 1/2” BSP O-ring 1580 § 1581 § 1584 § 1585 § 1586 § 1587 §

1” SAE 6B Splined

7/8”-14 O-Ring 1761 1057 1762 1058 1059 1872 1763 1060 1061 1062 1063 1064

1/2” NPTF 1764 1049 1765 1050 1051 1766 1767 1052 1053 1054 1055 1056

Manifold (UNC) 1768 1065 1769 1066 1067 1770 1771 1068 1069 1070 1071 1072

3/4”-16 End ported

7/8”-14 O-ring

Metric Manifold (M8)

G 1/2” BSP O-ring


7/8”-14 O-Ring 1835 1836 1837 1838 1839 1840 1841 1842

1/2” NPTF 1843 1497 1844 1449 1352 1845 1846 1847

Manifold (UNC) 1848 1466 1849 1459 1850 1851 1852 1853


7/8”-14 O-ring


G 1/2” BSP O-ring


7/8”-14 O-Ring 1854 1311 1855 1856 1857 1858 1859 1860

1/2” NPTF 1861 1313 1862 1312 1314 1863 1864 1315

Manifold (UNC) 1865 1305 1866 1306 1307 1867 1868 1869


7/8”-14 O-ring


G 1/2” BSP O-ring

7/8” 13 Tooth Spline SAE B

7/8”-14 O-Ring

1/2” NPTF

Manifold (UNC)


7/8”-14 O-ring


G 1/2” BSP O-ring

1” SAE J501 Tapered

7/8”-14 O-Ring

1/2” NPTF

Manifold (UNC)

3/4”-16 End ported 1471

7/8”-14 O-ring 1680 ¶


G 1/2” BSP O-ring

25mm Straight G 1/2” BSP O-ring 1644 § 1645 § 1646 §

328328

Char

-Lyn

n M

otor





H Series - Mounting Flange Type all measurements are in mm unless otherwise stated

Char-Lynn H Series - Specifications, Mounting Flange and Shafts For prices, please register online or contact us by phone, fax or email.

H Series - Specifications*

Displacementcc/rev 36 46 59 74 97 120 146 159 185 231 293 370 739in3/rev 2.2 2.8 3.6 4.5 5.9 7.3 8.9 9.7 11.3 14.1 17.9 22.6 45.1

Max. Speed @ Continuous Flow rpm 1021 969 953 760 585 469 385 353 304 243 192 152 74

Flow - Continuousl/min 38 45 57gpm 10 12 15

Flow - Intermittentl/min 38 53 64 68 76gpm 10 14 17 18 20

Torque - ContinuousNm 56 73 91 118 155 192 221 233 265 302 351 407 389lb-in 497 650 802 1044 1368 1699 1954 2059 2343 2669 3110 3604 2440

Torque - IntermittentNm 75 99 122 158 207 257 300 319 356 415 466 484 520lb-in 668 876 1076 1401 1829 2278 2653 2824 3151 3671 4121 4283 4600

Min. starting Torque @ Continuous Pressure

Nm 53 67 85 106 139 169 179 189 213 242 285 333 318lb-in 470 590 750 940 1230 1530 1760 1860 2100 2380 2810 3280 2810

Min. starting Torque @ Intermittent Pressure

Nm 64 81 104 129 169 209 245 261 290 337 385 405 435lb-in 630 800 1020 1270 1660 2060 2410 2570 2860 3320 3790 3990 4285

Pressure Drop - ContinuousBar 124 124 124 124 124 124 117 114 110 100 93 86 41Psi 1800 1800 1800 1800 1800 1800 1700 1650 1600 1450 1350 1250 600

Pressure Drop - IntermittentBar 165 165 165 165 165 165 159 155 148 138 124 103 55Psi 2400 2400 2400 2400 2400 2400 2300 2250 2150 2000 1800 1500 800

4 Bolt Flange

H Series - Shaft TypeFor H Series Shafts, see page 321.

H Series - Specification Drawing

Spacer Plate Geroter

Backup Washer

Thrust Needle Bearing

Thrust Bearing Race

DriveHousing

End Cap View of Geroter SectionFlange Static SealsPressure SealExclusion Seal

Output Shaft

Cap Screws

Static Seal

2.815.2

42.9 (2)

85.8 max. (2)84.0 max.

ø44.45 / ø44.32

mounting surface

B PortEnd Ported Motor End Cap

Standard Motor End Cap98.3 max.

106.35133.9 max.

82.55 / 82.42

13.62 / 13.46

X

2.815.2

A Port

B Port

Side Port Motor - Y max.

Side Port Motor - YY max.

2 Bolt Flange

45º

2 and 4 Bolt Mounting Flange - DimensionsDisplacement

mm 36 46 59 74 97 120 146 159 185 231 293 370 739inches 2.2 2.8 3.6 4.5 5.9 7.3 8.9 9.7 11.3 14.1 17.9 22.6 45.1

Dimension Xmm 6.4 6.4 10.2 10.2 13.2 16.5 20.1 21.9 25.4 31.8 40.4 50.8 101.6inches 0.25 0.25 0.40 0.40 0.52 0.65 0.79 0.86 1.00 1.25 1.59 2.00 4.00

Dimension Ymm 132.1 132.1 135.9 135.9 139.0 142.3 145.8 147.6 151.2 157.5 166.2 176.6 227.4inches 5.20 5.20 5.35 5.35 5.47 5.60 5.74 5.81 5.95 6.20 6.54 6.95 8.95

Dimension YYmm 138.5 138.5 142.3 142.3 145.3 148.6 152.2 154.0 157.5inches 5.45 5.45 5.60 5.60 5.72 5.85 5.99 6.06 6.20



Splined/Tapered Shafts and Frequent Reversals. 6B splined or tapered shafts are recommended when operating above 282Nm [2500 lb-in] of torque, especially for those applications subject to frequent reversals.

329329

Char

-Lyn

n M

otor

s





Char-Lynn H, S and T Series - Shafts

H, S and T Series - Shaft Type all measurements are in millimetres (mm) unless otherwise stated

38.6 / 37.038.6 / 37.0

ø4.06 / ø3.81

25.43 / 25.37

3.31 / 2.93

61.8 / 60.250.6 / 49.0

27.99 / 27.66

25.40 / 25.15

25.40 / 25.1519.1 / 18.0

16.3 / 15.2

ø10.44 / ø10.19

24.5 min.

ø25.40 / ø25.37

ø25.40 / ø25.37

28.30 / 27.89 ø25.35 /

ø25.30

ø25.40 / ø25.37

ø8.08 / ø7.92

51.6 / 50.0

46.0 / 44.5 46.0 / 44.5

46.0 / 44.5

11.7 / 10.7

25.07 / 24.81

ø25.00 / ø24.97

ø22.22 / ø22.19

ø21.79 / ø21.66


1" Straight with Woodruff Key SAE 6B Splined

1" Straight with .315 Crosshole 1" Straight with .406 Crosshole

1" Tapered with Woodruff Key and Nut 25mm Straight with 8mm Keyway

7/8" Straight with Key 7/8" SAE B 13 Tooth Splined

mounting surface*

mounting surface*

mounting surface*

*2 Bolt SAE B mounting flange has a greater pilot thickness and a thinner mounting plate (end of shaft to flange, add 3.3mm)

mounting surface*

mounting surface*

mounting surface*

mounting surface*

mounting surface*

5.6 / 3.65.6 / 3.6

8.4 / 7.1

6.6 / 4.6 6.6 / 4.6

6.9 / 4.86.6 / 4.6

7.5 / 5.4

34.93

37.1

6.4

330330

Char

-Lyn

n M

otor





S Series - Ordering Code

Use this chart to compile your ordering code. For example: 6CM/103- 1035 (93 cc/rev displacement, 2 Bolt Flange Mounting, 1” straight with Woodruff Key Shaft, 7/8" - 14 O-Ring Port)

6CM/103- &&&&

* Includes G 1/4" BSP (EC) § Includes 7/16" - 20 (EC) HP High Pressure Shaft Seal LSV Low Speed Valving

&&&& S Series Code Displacement - cc/rev [in3/rev]Mounting Flange Shaft Ports 59

[3.6]75 [4.6]

93[5.7]

120[7.3]

144[8.8]

166[10.1]

187[11.4]

225[13.7]

298[18.2]

372[22.7]

2 Bolt Flange

1" straight with Woodruff key

7/8”-14 O-Ring 1537 1034 1035 1538 1539 1036 1037 1038 / 2038 § 1039 1040 /

2040 §

1/2” NPTF 1540 1026 1027 1541 1542 1028 1029 1030 1031 1032

Manifold 1543 1042 1043 1544 1545 1044 1045 1046 1047 1048

G 1/2” BSP O-ring 1438 *

1" SAE 6B Splined

7/8”-14 O-Ring 1552 1082 1083 1553 1554 1084 1085 1086 1087 1088

1/2” NPTF 1555 1074 1075 1556 1557 1076 1077 1078 1079 1080 / 2080 §

Manifold 1558 1090 1091 1559 1560 1092 1093 1094 1095 1096

G 1/2” BSP O-ring 3172 HP-LSV

25mm Straight G 1/2” BSP O-ring 1463 * 1464 * 1607 * 1608 * 1465 * 1466 * 1467 * 1468 * 1469 *

4 Bolt Flange


7/8”-14 O-Ring 1570 1010 1011 1571 1572 1012 1013 1014 1015 1016

1/2” NPTF 1573 1002 / 1614 1003 1574 1575 1004 1005 1006 1007 1008

Manifold 1576 1018 1019 1577 1578 1020 1021 1022 1023 1024

G 1/2” BSP O-ring

1" SAE 6B Splined

7/8”-14 O-Ring 1579 1058 1059 1580 1581 1060 1061 1062 1063 1064

1/2” NPTF 1582 1050 1051 1583 1584 1052 1053 1054 1055 1056

Manifold 1585 1066 1067 1586 1587 1068 1069 1070 1071 1072

G 1/2” BSP O-ring

Char-Lynn S Series - Ordering Code For prices, please register online or contact us by phone, fax or email.

331331

Char

-Lyn

n M

otor

s





S Series - Specifications*

Displacement cc/rev 59 75 93 120 144 166 187 225 298 372in3/rev 3.6 4.6 5.7 7.3 8.8 10.1 11.4 13.7 18.2 22.7

Max. Speed @ Continuous Flow rpm 963 792 607 472 394 343 304 253 190 153

Flow - Continuousl/min 57 57 57 57 57 57 57 57 57 57gpm 15 15 15 15 15 15 15 15 15 15

Flow - Intermittentl/min 68 76 76 76 76 76 76 76 76 76gpm 18 20 20 20 20 20 20 20 20 20

Torque - ContinuousNm 115 150 183 237 265 301 333 372 491 528lb-in 1021 1325 1623 2010 2347 2662 2950 3290 4345 4672

Torque - IntermittentNm 144 186 225 292 324 360 399 434 505 587lb-in 1271 1649 1992 2582 2870 3191 3533 3843 4467 5200

Minimum Starting Torque - Continuous Pressure

Nm 90 113 148 184 212 232 263 302 338 369lb-in 800 1000 1310 1630 2050 2330 2670 2990 3270 3270

Minimum Starting Torque - Intermittent Pressure

Nm 116 146 190 236 271 289 329 374 417 438lb-in 1030 1290 1680 2090 2400 2560 2910 3310 3690 3880

Pressure Drop- ContinuousBar 138 138 138 138 131 131 128 117 103 90Psi 2000 2000 2000 2000 1900 1900 1850 1700 1500 1300

Pressure Drop - IntermittentBar 172 172 172 172 162 159 155 141 124 103Psi 2500 2500 2500 2500 2350 2300 2250 2050 1800 1500

S Series - Mounting Flange Type all measurements are in mm unless otherwise stated

4 Bolt Flange

S Series - Shaft TypeFor S Series Shafts, see page 321.

S Series - Specification Drawing

Spacer Plate Geroter

Thrust Needle Bearing

DriveHousing

End Cap View of Geroter SectionFlange Static Seals

Pressure Seal

Exclusion Seal

Output Shaft

Cap Screws

45º

2.8

2.8

15.2

15.2

42.9 (2)85.8 max. (2)

ø107.7 max.

ø44.45 / ø44.32

mounting surface


106.35133.9 max.

82.55 / 82.42

ø13.62 / ø13.46

X

A Port B Port

Y max.

2 Bolt Flange

2 and 4 Bolt Mounting Flange - Dimensions

Displacementmm 59 75 93 120 144 166 187 225 298 372inches 3.6 4.6 5.7 7.3 8.8 10.1 11.4 13.7 18.2 22.7

Dimension Xmm 7.5 9.8 12.0 15.5 18.6 21.3 24.0 28.9 38.5 47.9inches .30 .39 .47 .61 .73 .84 .94 1.14 1.52 1.88

Dimension Ymm 138.0 140.3 142.5 146.0 149.1 151.8 154.5 159.4 169.0 178.4inches 5.43 5.52 5.61 5.75 5.87 5.98 6.08 6.28 6.66 7.02

Char-Lynn S Series - Specifications, Mounting Flange and Shafts For prices, please register online or contact us by phone, fax or email.




332332

Char

-Lyn

n M

otor





T Series - Ordering Code

Use this chart to compile your ordering code. For example: 6CM/158- 1035 (102 cc/rev displacement, 2 Bolt Flange Mounting, 1” straight with Woodruff Key Shaft, 7/8" - 14 O-Ring Port)

6CM/158- &&&&&&&& T Series Code Displacement - cc/rev [in3/rev]Mounting Flange Shaft Ports 36

[2.2]49[3.0]

66[4.0]

80[4.9]

102[6.2]

131[8.0]

157[9.6]

195[11.9]

244[14.9]

306[18.7]

370[22.6]

2 Bolt Flange


7/8”-14 O-Ring 1537 1034 1035 1538 1036/

3416 N 1037 1038 1039 1040

1/2” NPTF 1540 1026 1027 1541 1028 1029 1030 1031 1032

Manifold 1543 1042 1043 1544 1044 1045 1046 1047 1048

G 1/2” BSP O-Ring 1435 * 1550 *

1" SAE 6B Splined

7/8”-14 O-Ring 1552 1082 1083 1553 1084 1085 1086 1087 1088

1/2” NPTF 1555 1074 1075 1556 1076 1077 1078 1079 1080

Manifold 1558 1090 1091 1559 1092 1093 1094 1095 1096

G 1/2” BSP O-Ring 3629A-HP 3473A-HP 1453 * 1455 *

25mm Straight

G 1/2” BSP O-Ring

2790 *K6/ 2803 *K6/ 2985 *LSV/ 3028 *

1606 */ 3776A-HP

2804 *K6/ 2944 *K6 2735K6

1465 */ 2791 *K6/ 2801 *K6

1466 */ 2807 *NP/ 3582

1468 */ 2802 *K6 1469 *

SAE 13 Tooth Spline

7/8”-14 O-Ring 3659

4 Bolt Flange


7/8”-14 O-Ring 2928 1570 1010 1011 1571 1012 1013 1014 1015 1016

1/2” NPTF 1573 1002 1003/ 2003 § 1574 1004/

2004 § 1005 1006 1007 1008

Manifold 1576 1018 1019 1577 1020 1021 1022 1023 1024

G 1/2” BSP O-Ring 1482 *

1" SAE 6B Splined

7/8”-14 O-Ring 1579 1058 1059 1580 1060 1061 1062 1063 1064

1/2” NPTF 1582 1050 1051 1583 1052 1053 1054 1055 1056

Manifold 1585 1066 1067 1586 1068 1069 1070/ 3976 § 1071 1072

G 1/2” BSP O-Ring 1491 *

4 Bolt Magneto Flange

25mm Straight

Manifold Ports MB 3031 *

Char-Lynn T Series - Ordering Code For prices, please register online or contact us by phone, fax or email.

* Includes G 1/4" BSP (EC) § Includes 7/16" - 20 (EC) K6 K6 Shaft NP No PaintLSV Low Speed Valving N Electroless Nickel Plated HP High Pressure Shaft Seals A Internal Check Valves

333333

Char

-Lyn

n M

otor

s





T Series - Specifications*

Displacement cc/rev 36 49 66 80 102 131 157 195 244 306 370in3/rev 2.2 3.0 4.0 4.9 6.2 8.0 9.6 11.9 14.9 18.7 22.6

Max. Speed @ Continuous Flow rpm 1021 906 849 694 550 426 355 287 229 183 152

Flow - Continuousl/min 38 45 57 57 57 57 57 57 57 57 57gpm 10 12 15 15 15 15 15 15 15 15 15

Flow - Intermittentl/min 38 57 68 76 76 76 76 76 76 76 76gpm 10 15 18 20 20 20 20 20 20 20 20

Torque - ContinuousNm 76 105 138 174 219 251 297 359 410 441 430lb-in 672 928 1222 1541 1936 2226 2628 3178 3633 3905 3811

Torque - IntermittentNm 93 118 168 212 264 307 359 437 485 483 486lb-in 824 1131 1488 1872 2339 2718 3178 3864 4290 4275 4300

Pressure Drop - ContinuousBar 155 155 155 155 155 138 138 138 127 110 90Psi 2250 2250 2250 2250 2250 2000 2000 2000 1850 1600 1300

Pressure Drop - IntermittentBar 190 190 190 190 190 172 172 172 155 124 103Psi 2750 2750 2750 2750 2750 2500 2500 2500 2250 1800 1500

T Series - Mounting Flange Type all measurements are in mm unless otherwise stated

4 Bolt Flange

T Series - Shaft TypeFor T Series Shafts, see page 321.

T Series - Specification Drawing

Geroler Star

Motor Shaft Drive

Motor Shaft/Spool Valve

Port B

Port A

45º

2.8

2.8

15.2

15.2

41.4 (2)

85.9 max.(2)

ø87.9 max.

ø44.45 / ø44.32

mounting surface


106.35

133.9 max.

ø82.55 / ø82.42

ø13.62 / ø13.46

X

A Port B Port

Y max.

2 Bolt Flange

2 and 4 Bolt Mounting Flange - Dimensions

Displacementmm 36 49 66 80 102 131 157 195 244 306 370inches 2.2 3.0 4.0 4.9 6.2 8.0 9.6 11.9 14.9 18.7 22.6

Dimension Xmm 6.6 9.1 12.2 14.7 18.5 24.1 29.0 35.6 44.7 56.1 72.1inches 0.26 0.36 0.48 0.58 0.73 0.95 1.14 1.40 1.76 2.21 2.84

Dimension Ymm 132.2 134.6 137.7 140.3 144.3 149.6 154.5 161.3 170.3 181.6 197.9inches 5.21 5.30 5.42 5.53 5.68 5.89 6.09 6.35 6.71 7.16 7.79

Char-Lynn T Series - Specifications, Mounting Flange and Shafts For prices, please register online or contact us by phone, fax or email.




334334

Char

-Lyn

n M

otor





2,000 Series - Ordering Code

Use this chart to compile your ordering code. For example: 6CM/104 - 1041 (Prefix 104, 2000 series motor, 195 cc/rev displacement, 2 Bolt SAE A Flange Mounting, 1” Straight Shaft, 1 1/16”-12 O-Ring 180° apart Ports)

Char-Lynn 2,000 Series - Ordering Code For prices, please register online or contact us by phone, fax or email.

* G 1/4" BSP, Case Flow § 7/16" UNF, Case Flow AB Reverse Rotation EP End Ported Ports

&&&& 2,000 Series$$$ Code Prefix Displacement - cc/rev [in3/rev]Code Prefix

Mounting Flange Shaft Ports 80

[4.9]100[6.2]

130[8.0]

160[9.6]

195[11.9]

245[14.9]

305[18.7]

395[24.0]

490[29.8]

104

2 Bolt SAE A Flange

1” Straight7/8”-14 O-Ring staggered 1001 1002 1003 1004 1005/

3155 § 1006 1007 1143

1 1/16”-12 O-Ring 180° apart 1037 1038 1039 1040 1041 1042 1043 1044Manifold (3/8”-16 Mtg Holes) 1394

1 1/4” Straight7/8”-14 O-Ring staggered 1022 1023 1024 1025 1026

1027/ 1808 (shaft 17)/ 3057 accessory?

1028 1228 1420

7/8”-14 O-Ring End Ports 1559 1 1/16”-12 O-Ring 180° apart 1061 1062 1063 1064 1065 1066 1067 1068 1421

1 1/4” 14 Tooth Splined

7/8”-14 O-Ring staggered 1029 1030 1031 1032 1033 1034 1035/ 3023 § 1229 1422

1 1/16”-12 O-Ring 180° apart 1087 1088 1089 1090 1091 1092 1093 1094 1423Manifold (3/8”-16 Mtg Holes) 1431Manifold (1/2” and 5/8”) 1726*G 1/2” (BSP) 1809*

1”SAE 6B Splined

7/8”-14 O-Ring staggered 10181 1/16”-12 O-Ring 180° apart 1057G 1/2” (BSP) 1900*Manifold (3/8”-16 Mtg Holes) 4299 §

32mm Straight G 1/2” (BSP) 1498 3062* 1799* 3065* 1547 3068*7/8” 13 Tooth 7/8”-14 O-Ring staggered 1958 §

Manifold (3/8”-16 Mtg Holes) 4168 §AB25mm Straight G 1/2” (BSP) 3347 * 3005*

2 Bolt SAE B Flange

1 1/4” Straight 7/8”-14 O-Ring staggered 1200 1201 1202 1203 1204 1205 1206 12071 1/4” 14 Tooth Splined 7/8”-14 O-Ring staggered 3471 §1 1/4” Involute SAE C Splined 7/8”-14 O-Ring staggered 1208 1209 1210 1211 1212 1213 1214 1215

1” SAE 6B Splined 7/8”-14 O-Ring staggered 1193 1194 1195 1196 1197 1198 1199G 1/2” (BSP) 1972 *

7/8” SAE B Splined 7/8”-14 O-Ring staggered 1216 1217 1218 1219 122025mm Straight G 1/2” (BSP) 1503*AB32mm Straight G 1/2” (BSP) 1384 1385 1386 1387 1388 1389 1390 1391 1546

Standard with 4 Bolt Square Flange


G 1/2” (BSP) 1376 1377 1378 1379 1380 1381 1382 1383 1660Manifold (3/8”-16 Mtg Holes) 1461 1462 1463 1464 1465 1466 1467 1468 14697/8”-14 O-Ring staggered 3523 §

1 1/4” Tapered G 1/2” (BSP) 14477/8”-14 O-Ring staggered 1255 1256 1259 1261

1 1/4” Straight 7/8”-14 O-Ring staggered 1249 1252G 1/2” (BSP) 1662*

32mm Straight 7/8”-14 O-Ring staggered 1748 §G 1/2” (BSP) 4004EP

25mm Straight G 1/2” (BSP) 3146*

4 Bolt Magneto

1 1/4” Straight7/8”-14 O-Ring staggered 1401 1445 13977/8”-14 O-Ring End ports 1608G 1/2” (BSP) 1690*


7/8”-14 O-Ring staggered 1815 § 1406 1591G 1/2” (BSP) 1877*

1” SAE 6B Splined 7/8”-14 O-Ring staggered 1744 §/ 1774 §

32mm Straight Manifold (1/2” and 5/8”) 1944*G 1/2” (BSP) 3022*

35mm Straight G 1/2” (BSP) 3425* 3505*

105 Wheel Motor

1 1/4” Straight 7/8”-14 O-Ring staggered 11481 1/16”-12 O-Ring 180° apart 1149

32mm Straight G 1/2” (BSP) 1134 1135 1136 1137 1138 1139 1140 11411 1/4” Tapered 7/8”-14 O-Ring staggered 1001 1002 1003 1004 1005 1006 1007 1060 1152

1 1/16”-12 O-Ring 180° apart 1071 1072 1073 1074 1075 1076 1077 10781 1/4” 14 Tooth Splined

7/8”-14 O-Ring staggered 1029 1030 1031 1032 1033 1034 1035 10961 1/16”-12 O-Ring 180° apart 1079 1080 1081 1082 1083 1084 1085 1086

106 Bearingless 7/8”-14 O-Ring staggered 1008 1009 1010 1011 1012 1013 1014 1015 1047G 1/2” (BSP) 1038 1039 1040 1041 1042 1043 1044 1045

$$$ - &&&&6CM/

335335

Char

-Lyn

n M

otor

s





2,000 Series - Specification Drawing

2,000 Series, 2 Speed Motors - Ordering Code

The 2000 Series motors are available with an integral two speed feature. Use this chart to compile your ordering code. For example: 6CM/105 - 2002 (Prefix 104, 2000 2 speed series motor, 100 cc/rev displacement, 2 Bolt SAE A Flange Mounting, 1” Straight Shaft, 7/8” -14 O-Ring staggered)

2,000 Series - Specifications*

Displacement cc/rev 80 100 130 160 195 245 305 395 490in3/rev 4.9 6.2 8.0 9.6 11.9 14.9 18.7 24.0 29.8

Max. Speed @ Continuous Flow rpm 908 742 576 477 385 308 246 191 153Max. Speed @ Intermittent Flow rpm 908 924 720 713 577 462 365 287 230

Flow - Continuousl/min 75gpm 20

Flow - Intermittentl/min 75 95 115gpm 20 25 30

Torque - ContinuousNm 235 295 385 455 540 660 765 775 845lb-in 2065 2630 3420 4040 4780 5850 6750 6840 7470

Torque - IntermittentNm 345 445 560 570 665 820 885 925 930lb-in 3035 3950 4970 5040 5890 7250 7820 8170 8225

Pressure Drop - ContinuousBar 205 155 120Psi 3000 2250 1750

Pressure Drop - IntermittentBar 310 260 240 170 140Psi 4500 3750 3500 2750 2000

Pressure Drop - PeakBar 310 205 170Psi 4500 3250 2500

Char-Lynn 2,000 Series - Ordering Code and Specifications For prices, please register online or contact us by phone, fax or email.

&&&& 2,000 Series, 2 Speed Motors$$$ Code Prefix Displacement - cc/rev [in3/rev]Code Prefix


[4.9]100[6.2]

130[8.0]

160[9.6]

195[11.9]

245[14.9]

305[18.7]

395[24.0]

490[29.8]

104 2 Bolt SAE A Flange

1” Straight 7/8”-14 O-Ring staggered 2001 2002 2003 2004 2005 2006 2007 20081 1/4” Straight 7/8”-14 O-Ring staggered 2009 2010 2011 2012 2013 2014 2015 20161 1/4” 14T Splined 7/8”-14 O-Ring staggered 2017 2018 2019 2020 2021 2022 2023 2024

105 Wheel Motor1 1/4” Tapered 7/8”-14 O-Ring staggered 2001 2002 2003 2004 2005 2006 2007 20081 1/4” 14T Splined 7/8”-14 O-Ring staggered 2009 2010 2011 2012 2013 2014 2015 2016

106 Bearingless 7/8”-14 O-Ring staggered 2001 2002 2003 2004 2005 2006 2007 2008

$$$ - &&&&6CM/




Geroler ® Star

Motor Shaft Drive and Valve Drive

Disc Valve

Motor Shaft and Bearings

Port B Port A

336336

Char

-Lyn

n M

otor





2,000 Series - Shaft Type all measurements are in millimetres (mm) unless otherwise stated

2,000 Series - Mounting Flange Type all measurements are in millimetres (mm) unless otherwise stated

Char-Lynn 2,000 Series - Mounting Flanges and Shafts For prices, please register online or contact us by phone, fax or email.

SAE A 2 Bolt (Standard Motor) SAE B 2 Bolt

4 Bolt (Wheel Motor)

4 Bolt Bearingless

4 Bolt Magneto

1 1/4" Straight (Max. torque 768 Nm)

1" Straight (Max. torque 395 Nm)

32mm Straight (Max. torque 768 Nm)

1 1/4" 14 Tooth Splined (Max. torque 768 Nm)

1 1/4" Tapered (Max. torque 768 Nm)


SAE 6B Splined (Max. torque 395 Nm)

13 Tooth Splined (Max. torque 141 Nm)

18.5

38.1

38.4 max. 47.3 max.

38.1 max.

28.8 max.

30.8 max.

ø25.40 / ø25.34

31.7 ø55.1

ø25.40 x 6.38 / 6.35

28.28 / 27.88

25.9 / 24.9105.2 / 102.9

52.1 / 49.8 56.6 / 54.4

56.4 / 54.4

65.8 / 63.5

32.017 / 31.991

26.36 / 26.11

45.5 max.

9.2 / 4.5

52.4 / 49.7

52.1 / 49.8

42.2 / 40.1

32.6 / 30.9

56.4 max.

32.0 / 31.7

45.7 / 45.335.0 / 34.725.35 / 25.29

ø21.806 / ø21.678

35.34 / 35.05 28.00 / 27.66

ø31.75 / ø31.69 ø25.00 / ø24.97

7.963 / 7.937

10.00 / 9.96

ø31.75

33

7.963 / 7.937

3.97 / 3.63

ø 4.1

12.7

7.999 / 7.965

8.7 / 4.5

22.75

15.2

21.16 / 20.90

21.16 / 20.90

131.1 max.

ø82.55 / ø82.42

ø106.38

108.8 max. sq.

134.2 max. sq.

ø22.7 / ø21.8

ø22.7 / ø21.8

ø22.7 / ø21.8

ø82.55 / ø82.42

ø82.55 / ø82.42

ø13.85 / ø13.33

ø13.85 / ø13.33

ø13.72 / ø13.46

106.38

22.1 max.

176.8 max.

ø127.0

ø13.85 / ø13.3324.06 / 23.54

14.22 min. (4)

157.5 max. (2)119.2

sq. max.

ø 14.53 / 14.14

146.05

ø101.60 / ø101.47 ø57.2 / ø50.8

ø107.95 / ø107.82 ø127.00 /

ø126.87ø95.2

22.1 / 17.0

ø147.638

ø13.85 / ø13.33

9.7 / 9.1

6.7 / 6.0

6.7 / 6.0

3.8 / 2.822.7 / 22.0

47.3 / 45

22.1 max.

20.1 max.

135.7 max.ø106.38

45º

18.6 / 17.0

18.6 / 17.0 16.8 / 15.26.7 / 6.0

O Ring Seal

18.6 / 17.0

6.4

6.4

2.8 / 2.3

337337

Char

-Lyn

n M

otor

s





4,000 Series - Ordering Code and Specifications

Use this chart to compile your ordering code. For example: 6CM/109 - 1008 (Prefix 109, 4000 series motor, 205 cc/rev displacement, 1 5/8” Tapered Shaft, 3/4" Split Flange Ports)

Char-Lynn 4,000 Series - Ordering Code For prices, please register online or contact us by phone, fax or email.



[6.7]130 [7.9]

160 [9.9]

205 [12.5]

245 [15.0]

310 [19.0]

395 [24.0]

495 [30.0]

625 [38.0]

109

Standard

1 1/4” Straight 1 1/16” O-Ring 1100 1101 1102 1103 1104 1105 1106 1212 12153/4” Split Flange 1001 1054 1002 1003 1055 1056 1057

40mm Straight G 3/4” (BSP) 1184 1185 1186 1187 1188 1189 1190

1 5/8” Tapered 1 1/16” O-Ring 1107 1108 1109 1110 1111 1112 1113 1479 14553/4” Split Flange 1006 1058 1007 1008 1059 1060 1061

1 1/2” 17 Tooth Splined G 3/4” (BSP) 1191 1192 1193 1194 1195 1196 1197

1 1/4” 14 Tooth Splined 1 1/16” O-Ring 1114 1115 1116 1117 1118 1119 11203/4” Split Flange 1011 1062 1012 1013 1063 1064 1065

4 Bolt SAE B

1 1/4” 14 Tooth Splined 7/8” UNF 1204* /1238*

1 1/4” Straight G 3/4” (BSP) 1473 §1 1/16” O-Ring 1584 ¶

4 Bolt SAE C

1 1/4” 14 Tooth Splined 1 1/16” O-Ring 1305 ¶ 12033/4” Split Flange 1278

1 1/4” Straight 1 1/16” O-Ring 12151 5/8” Tapered G 3/4” (BSP) 121140mm Straight G 3/4” (BSP) 1227

/1377 § 1225 1267 12331 1/2” 17 Tooth Splined G 3/4” (BSP) 1432 § 1383 §

Standard ISO

40mm Straight G 3/4” (BSP) 1248 § 1247 § 1245 § 1246 § 1234 § /1519 §

1 5/8” Tapered G 3/4” (BSP) 1260 §

110 Wheel Motor

1 1/4” Straight 1 1/16” O-Ring 1074 1075 1076 1077 1078 1079 1080 11223/4” Split Flange 1001 1040 1002 1003 1041 1042 1043

40mm Straight G 3/4” (BSP) 1108 1109 1110 1111 1112 1113 1114

1 5/8” Tapered 1 1/16” O-Ring 1081 1082 1083 1084 /1156 ¶ SG

1085 /1128 ¶ /1194 ¶ SG

1086 /1143 ¶ SG /1192 ¶ SG

1087 1116 1117

1 1/4” 14 Tooth Splined3/4” Split Flange 1006 1044 1007 1008 1045 1046 10471 1/16” O-Ring 1088 1089 1090 1091 1092 1093 10943/4” Split Flange 1011 1048 1012 1013 1049 1050 1051

111 Bearingless

1 1/16” O-Ring 1033 1034 1035 1036 1037 1038 1039 1062 10633/4” Split Flange 1044 1015 1045 1046 1016 1017 1018G 3/4” (BSP) 1052 1053 1054 1055 1056 1057 10587/8” UNF 1021 ƒ

/1061 ƒ

$$$ - &&&&6CM/

* 9/16” UNF Case Flow § G 1/4” BSP Case Flow ¶ 7/16” UNF Case Flow ƒ 9/16" Case Flow SG Seal Guard

4,000 Series - Specifications*Displacement cc/rev 110 130 160 205 245 310 395 495 625

in3/rev 6.7 7.9 9.9 12.5 15.0 19.0 24.0 30.0 38.0Max. Speed @ Continuous Flow rpm 697 722 582 459 383 303 239 191 151Max. Speed @ Intermittent Flow rpm 868 862 693 546 532 422 376 305 241Flow - Continuous l/min 75 95

gpm 20 25Flow - Intermittent l/min 95 115 130 150

gpm 25 30 35 40Torque - Continuous Nm 320 375 485 600 705 850 930 945 970

lb-in 2850 3300 4290 5300 6240 7530 8240 8375 8605Torque - Intermittent Nm 470 560 705 800 845 1065 1185 1170 1180

lb-in 4160 4940 6240 7100 7470 9420 10470 10350 10450Pressure Drop - Continuous Bar 205 190 140 115

Psi 3000 2750 2000 1700Pressure Drop - Intermittent Bar 310 260 310 260 240 170 140

Psi 4500 3750 4500 3750 3500 2500 2000Pressure Drop - Peak Bar 310 295 230 180

Psi 4500 4250 3300 2600




338338

Char

-Lyn

n M

otor






Char-Lynn 4,000 Series - Specifications, Mounting Flange and Shafts For prices, please register online or contact us by phone, fax or email.

Standard 4 Bolt SAE B

Bearingless

Standard ISO 4 Bolt SAE C

Wheel

ø139.70 / ø139.57

ø127.00 / ø126.9

ø108.7 max.

ø127.0 ø109.5

ø14.53 / ø14.15 14.03 max.

21.8 / 21.3 24.1 / 21.1

12.4

25.9

14.50 / 14.14

14.53 / 14.15

15.2 / 14.5

17.2

ø161.92 145

10.7 / 9.1 10.7 / 9.122.4 / 21.8 22.4 / 21.8

76.2 / 63.5 77.69

12.7 / 12.426.7 / 26.2 32

4.3 / 3.3 18.5

148.8 max. sq.147.6 max. sq.

119.9 max. sq. 116.2 sq.

148.3 max. sq. 140.8 sq.

ø101.60 / ø101.47

ø101.60 / ø101.47

ø127.00 / ø126.87 ø124.9

ø165.0

116.74 sq.

89.8 sq.92.1

161.9

114.5 sq.

124.2 max.

9.7 / 8.6

81.8







7.963 / 7.937

5.54 / 5.20

42.0 / 40.6 38.1 min. ø4.1

31.2 min.

ø38.10

35.33 / 35.07

ø33.28 / ø33.02

ø31.75 / ø31.69 ø31.7

70.9 / 68.6

93.9 / 92.0

70.9 / 68.6

66.8 / 65.0

164.8 / 162.1

53.1 max. 53.1 max.

51.8 max.

9.2 / 4.512.000 / 11.957

11.138 / 11.112 sq. key

8.000 / 7.90070.7 / 69.343.03 /

42.72

ø40.02 / ø39.99

ø41.326 / ø41.275

81.3 max.

76.6

31.7

339339

Char

-Lyn

n M

otor

s






Use this chart to compile your ordering code. For example: 6CM/112 - 1025 (Prefix 112, 6000 series motor, 245 cc/rev displacement, 1 1/2" 17 Tooth Spline Shaft, 3/4" Split Flange Ports)




[11.9]245 [15.0]

310 [19.0]

390 [23.9]

490 [30.0]

625 [38.0]

735 [45.0]

805 [49.0]

985 [60.0]

112

Standard

1 1/2” Straight 1 5/16” O-Ring 1064 1065 1066 1067 1068 1107 1145 106940mm Straight G 1” (BSP) 1094 1095 1096 1097 1098 1099


1 5/16” O-Ring 1058 1059 1060 1061 1062 1109 1163 1063G 1” (BSP) 1088 1089 1090 1091 1092 1093

Standard 4 Bolt 50mm Straight G 1” (BSP) 1218 ¶ 1215 ¶ 1216 ¶

4 Bolt SAE CC

1 3/4” J501 Tapered

3/4” Split Flange 10111 5/16” O-Ring 1108


3/4” Split Flange 1025 1026

1 5/16” O-Ring 1290 1132 /1206 §

40mm Straight G 1” (BSP) 1111


1 5/16” O-Ring 1076 * 1166 * 1080*G 1” (BSP) 1193 ¶ V 1213 ¶ V

1 1/2” Straight 1 5/16” O-Ring 1254§ 1145 § 1227 §

4 Bolt SAE DD 1 1/2” 17 Tooth Splined 1 5/16” O-Ring 1131 *

113 Wheel Motor

40mm Straight G 1” (BSP) 1082 1083 1084 1085 1086 1100 1087


1 5/16” O-Ring 1070 1071 1072 1073 1074 /1140 § 1093 1075

G 1” (BSP) 1143 ¶ VSAE 3/4” 1108 § V

114 Bearingless1 5/16” O-Ring 1031

/1079*NMN1032 /1020*NMN 1033 1034 1035 1055 1036

G 1” (BSP) 1043 1044 1045 1046 1047 1048

$$$ - &&&&6CM/

* 9/16” Case Flow § 7/16” Case Flow ¶ G 1/4" BSP V Viton Seal NMN Non-Masked Nameplate

6,000 Series - Specifications*Displacement cc/rev 195 245 310 390 490 625 735 805 985

in3/rev 11.9 15.0 19.0 23.9 30.0 38.0 45.0 49.0 60.0Max. Speed @ Continuous Flow rpm 775 615 485 387 307 241 203 187 153Max. Speed @ Intermittent Flow rpm 866 834 698 570 454 355 303 280 230

Flow - Continuous l/min 150gpm 40

Flow - Intermittent l/min 170 210 225gpm 45 55 60

Torque - Continuous Nm 575 735 930 1155 1445 1480 1378 1582 1685lb-in 5100 6510 8230 10230 12800 13100 12192 14004 14920

Torque - Intermittent Nm 860 1100 1355 1635 1885 1898 1699 1850 1875lb-in 7620 9740 11990 14490 16670 16800 15040 16377 16580

Pressure Drop - Continuous Bar 205 170 140Psi 3000 2500 2000

Pressure Drop - Intermittent Bar 310 275 221 170 140Psi 4500 4000 3200 2500 2000

Pressure Drop - Peak Bar 310 240 205 170Psi 4500 3500 3000 2250




340340

Char

-Lyn

n M

otor







Char-Lynn 6,000 Series - Mounting Flange and Shafts For prices, please register online or contact us by phone, fax or email.

Standard Standard 4 Bolt

Bearingless

4 Bolt SAE DD4 Bolt SAE CC

Wheel

ø127.00 / ø126.87 ø153

ø127.00 / ø126.87

ø127.00 / ø126.87

ø127.00 / ø126.87

ø139.70 / ø139.57

152.25

45º

ø14.53 / ø14.14 ø17.75

ø15.24

ø184.12

ø14.53 / ø14.14

ø14.53 / ø14.14

24.6 / 24.1 20.53

24.6 / 24.1

24.2 / 21.014.50 / 14.14

22.6 / 22.1

22.19

13.59 / 12.8 22.0

13.59 / 12.8

12.7 / 12.198.6 / 97.0

9.56 / 9.52

9.2 / 4.5

5.54 / 5.20

12.99

146.8 sq. max. 170 sq. max.

200 sq. max.

147.6 sq. max.

146.8 sq. max.

166.4 sq. max.

147.4 max. 170 max.

200 max.147.4 max.

130.21 max.

ø161.9 ø210

ø228.6

ø161.9

ø161.9

7.7417.3 / 16.8

114.5 sq. 145 sq.

162 sq.

114.5 sq.

114.5 sq.





42.0 / 40.6

12.000 / 11.957

8.000 / 7.910

63.7 / 62.243.03 / 42.72

40.018 / 39.992

31.742.40 /42.13

40.3 min.

ø44.45

ø38.10

38.10 / 38.04 11.138 / 11.112

78.2 / 76.2

78.2 / 76.2

177.8 / 175.0

94.0 / 91.9

56.7 max.

56.7 max. 75.6 max.

77.0

341341

Char

-Lyn

n M

otor

s






Use this chart to compile your ordering code. For example: 6CM/119 - 1044 (Prefix 119, 10,000 series motor, 345 cc/rev displacement, 2 1/8" 16 Tooth Spline, 1 5/16” O-Ring)

10,000 Series - Specifications*

Displacement cc/rev 345 480 665 940in3/rev 21.0 29.3 40.6 57.4

Maximum Speed @ Continuous Flow rpm 501 354 254 179

Maximum Speed @ Intermittent Flow rpm 784 552 396 279

Flow - Continuousl/min 170gpm 45

Flow - Intermittentl/min 265gpm 70

Torque - ContinuousNm 1040 1475 2085 2700lb-in 9220 13050 18450 23910

Torque - IntermittentNm 1390 1965 2610 3440lb-in 12310 17410 23080 30460

Pressure Drop - Continuous

Bar 205 190Psi 3000 2750

Pressure Drop - Intermittent

Bar 275 260 240Psi 4000 3750 3500

Pressure Drop - PeakBar 275 260Psi 4000 3750

10,000 Series, 2 Speed Motor - Specifications*

Displacement HSLTcc/rev 169 239 332.7 470in3/rev 10.3 14.6 20.3 28.7

Displacement LSHTcc/rev 345 480 665 940in3/rev 21.0 29.3 40.6 57.4

Max. Speed @ Cont. Flow

HSLT rpm 750 630 500 400LSHT rpm 375 315 250 200

FlowHSLT

l/min 130 170gpm 35 45

LSHTl/min 130 170gpm 35 45

Torque - Continuous

HSLTNm 440 630 905 1175lb-in 3900 5600 8000 10400

LSHTNm 1015 1470 2090 2710lb-in 9000 13000 18500 24000

Torque - Intermittent

HSLTNm 585 845 1130 1470lb-in 5200 7500 10000 13000

LSHTNm 1355 1965 2600 3445lb-in 12000 17400 23000 30500

Pressure Drop - Continuous

Bar 205 190Psi 3000 2750

Pressure Drop - Intermittent

Bar 275 260 240Psi 4000 3750 3500


* 9/16" Case Flow

HSLT High Speed, Low Torque LSHT Low Speed, High Torque

&&&& 10,000 Series &&&& 10,000 Series, 2 Speed Motor$$$ Code Prefix Displacement - cc/rev [in3/rev] Displacement - cc/rev [in3/rev]Code Prefix


[21.0]480 [29.3]

665 [40.6]

940 [57.4]

345 [21.0]

480 [29.3]

665 [40.6]

940 [57.4]

119 Standard

2 1/4” Straight

1 5/16” O Ring 1028 1029 1030 1031 2013 2014 2015 20161 1/4”Split Flange 1040 1041 1042 1043/1095* 2001 2002 2003 2004

2 1/8" 16 Tooth Spline

1 5/16” O Ring 1032 1033 1034 1035 2021 2022 2023 20241 1/4”Split Flange 1044 1045 1046 1047 2009 2010 2011 2012

2 1/4” Tapered


120 Wheel Motor

2 1/4” Straight

1 5/16” O Ring 1005 1006 1007 10081 1/4”Split Flange 1017 1018 1019 1020 2005 2006 2007 2008

2 1/8" 16 Tooth Spline

1 5/16” O Ring 1009 1010 1011 10121 1/4”Split Flange 1021 1022 1023 1024 2009 2010 2011 2012

2 1/4” Tapered


121 Bearingless1 5/16” O Ring 1007 1008 1009 1010 2005 2006 2007 20081 1/4”Split Flange 1011 1012 1013 1014/1023* 2001 2002 2003 2004

$$$ - &&&&6CM/




342342

Char

-Lyn

n M

otor





10,000 Series - Mounting Flange Type 10,000 Series - Shaft Type

Char-Lynn 10,000 Series - Mounting Flange and Shafts For prices, please register online or contact us by phone, fax or email.

12.7 / 12.419.1 / 16.5 ø 228.60

ø 209.555.9 / 4.8

161.64 square

ø177.80 / ø177.67

ø139.7ø127.0

ø161.92

200.5 square max.

184.9 square max.

114.3 square

150.1 max.

ø 20.88 / ø20.52

131.1 / 127.8

147.1 max.

21.1 / 20.0

ø17.02 / ø16.51

ø127.00 / ø126.87

ø17.02 / ø16.5114.5 / 13.2

22.4 / 20.8

67.4 / 66.2

ø152.40 / ø152.27


63.5

97.5 max.ø57.150 / ø57.137

62.92 / 62.66

12.73 / 12.70 114.0 / 112.3


222.5 / 219.7

50.8

14.313 / 14.287ø4.32 / ø3.81

7.14 / 6.80

ø57.15

94.7


91.7 / 89.9

52.1 min.

75.0 max.

ø53.972

ø57.15

Bearingless

Wheel Mount

Standard Mount

343343

Char

-Lyn

n M

otor

s





White House Products Ltd · 2015-08-18 · Issue 5 - Section 23 Char-Lynn Motors International +44 1475 742500 UK 0800 130 3103 [email protected] Fax +44 1475 742888 White House Products

Documents