White - 4ft6 Bed with Slats Dimensions Width - 148cm Depth - 204cm Height -109cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0844 8008475 Assembly Instructions - Please keep for future reference - Uno S Midsleeper T1050-02 208,2 cm 121,2 cm 112,9 cm T1050-02 NR501-V6/V8 Issue 1 - 25/11/14 Ladder can be fitted right or left side 1 of 13
13
Embed
White - 4ft6 Bed with Slats - Uno S Midsleeper Uno S... · 2020-02-05 · White - 4ft6 Bed with Slats Dimensions Width - 148cm Depth - 204cm Height -109cm Issue 1 - 22/10/10 Important
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
White - 4ft6 Bed with Slats
Dimensions
Width - 148cm
Depth - 204cm
Height -109cm
Issue 1 - 22/10/10
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0844 8008475
Assembly Instructions - Please keep for future reference 6564942
- Uno S MidsleeperT1050-02
208,2 cm121,2 cm112,9 cm
T1050-02 NR501-V6/V8 Issue 1 - 25/11/14
Ladder can be fittedright or left side
1 of 13
Glue safety - Take care when using glue, please follow the advice below
Skin contact: Removecontamination by washing withsoap and water. This procedureshould also be followed prior toeating and drinking.
Eye contact: Rinse immediatelywith clean water for 15 minutesand seek medical advice.
If swallowed: Seek medicaladvice immediately.
Care and maintenance
• The bunk bed meets the europeanEN 747+A1:2015 standards for securityand durability.
• The bunk bed meets the Bunk Beds(Entrapment Hazards) (Safety)Regulations 1987
15,25 cm
Before Starting Assembly
• Only clean using a damp clothand mind detergent, do not usebleach or abrasive cleaners.
• Regularly check that there areno loose screws on this unit andretighten when necessary.
Parts of your product are producedfrom solid pine which is a naturalproduct containing a beautifulwooden structure.Direct sunlight can speed up thenatural process of the resincontained in the pine knots to changecolour around knots.This is a normal process happeningto natural wood and cannot be seenas a manufacturers fault. All woodhas been dryed to Industry standardsfor furniture timber and allprocedures for obtaining the bestlacquring finish have been followed.
Our furniture will endure mosttemperatures in the home but it is bestto avoid placing furniture next to heatsources as radiators or fire. Beparticularly careful with solid wood asthe lack of humidity caused by centralheating can cause damage such aswarping.
Safety when using your bedDo not allow children to climb over the safety rails. Always use the ladder when climbing in and out of bed. Neverattempt to hang bags, bunting or other items with strings or handles on the bed.
Components - FittingsPlease check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases morefittings may be supplied than are required.
A
Tools reqiured
1cm 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 inch 2 3 4 5 6
Rulers - Use this ruler to help correctly identify the screws