Veritas.Testinsides.VCS-255.v2017-01-05.by.linda · Which benefit is provided when Veritas Volume Manager (VxVM) uses the SmartMove feature? A. optimized Data Deduplication process

http://www.gratisexam.com/

VCS-255

Passing Score: 800Time Limit: 4 min



Exam A

QUESTION 1Which virtual storage configuration can be created with Veritas Storage Foundation 6.1 for UNIX?


A. LVM

B. RAID

C. SVM

D. LPAR

Correct Answer: BSection: (none)Explanation

Explanation/Reference:

QUESTION 2Which command line utility is used to view Veritas Volume Manager (VxVM) plexes?

A. vxdisk

B. vxdg

C. vxplex

D. vxprint

Correct Answer: DSection: (none)Explanation


QUESTION 3Which two types of virtual storage provide data redundancy? (Select two.)


A. concatenate

B. RAID-5

C. stripe

D. mirror

E. RAID-0

Correct Answer: BDSection: (none)Explanation


QUESTION 4What are two benefits of virtual storage using Veritas Storage Foundation 6.1 for UNIX? (Select two.)

A. improved deduplication for data backup

B. ability to resize storage across physical devices

C. improved disaster recovery by mirroring between arrays

D. enhanced file sharing

E. increased virtual memory

Correct Answer: BCSection: (none)Explanation


QUESTION 5A system administrator has a large amount of inactive data on the company's storage devices. The excess amount of data is causing slow access to the active dat

A. The administrator needs to set up automatic relocation of data so that data expires based on age.How can the administrator set the threshold for automatic relocation of data?

B. use SmartMove

C. use SmartTier

D. use Virtual Data Aging Service (VDAS)

E. use Intelligent Storage Provisioning (ISP)




QUESTION 6Which benefit is provided when Veritas Volume Manager (VxVM) uses the SmartMove feature?

A. optimized Data Deduplication process

B. optimized SmartTier storage allocation process

C. optimized mirror synchronization process

D. optimized File Replication process

Correct Answer: CSection: (none)Explanation


QUESTION 7What are two benefits of using Storage Checkpoints within Veritas Storage Foundation 6.1 for UNIX instead of file system snapshots? (Select two.)

A. transient

B. read-only

C. uses free space from parent file system

D. persistent

E. uses separate volume

Correct Answer: CDSection: (none)Explanation


QUESTION 8


Refer to the exhibit. What is the disk access name for the device displayed in the vxdisk list output?

A. mydg01

B. c2t0d0

C. mydg

D. c1t0d0



QUESTION 9Which advantage does the Data Change Object (DCO) feature provide?

A. optimized resynchronization of stale volume data

B. optimized SmartMove

C. optimized replication of volume data

D. optimized file compression

Correct Answer: ASection: (none)Explanation


QUESTION 10What are two benefits of using the FileSnap feature? (Select two.)



A. Instant snapshot creation of the same file

B. Instant snapshot creation of the same volume

C. Instant snapshot creation of the same file system

D. Instant snapshot creation of the same disk

E. Instant snapshot creation of the same virtual machine boot image

Correct Answer: AESection: (none)Explanation


QUESTION 11Refer to the exhibit. What is the layout of the volume described in the vxprint output provided in the exhibit?

A. mirror-concat

B. mirror-stripe

C. stripe-mirror

D. concat-mirror



QUESTION 12A volume that contains strictly two data plexes and has four subdisks in each plex can have which two types of layouts? (Select two.)

A. mirror-concat

B. mirror-stripe

C. stripe-mirror

D. concat-mirror

E. stripe with parity


Correct Answer: ABSection: (none)Explanation


QUESTION 13What is the correct RAID level for a layered volume layout that combines mirroring with striping or concatenation?

A. RAID-0

B. RAID-1

C. RAID-0+1

D. RAID-1+0



QUESTION 14What are two advantages of a properly configured striped volume layout? (Select two.)

A. provides hot-relocation

B. provides load balancing

C. improves performance

D. provides data redundancy

E. improves reliability



QUESTION 15Where do the private and public regions of Cross-platform Data Sharing (CDS) formatted disks reside?


A. on separate disk slices

B. on a single disk slice

C. on reserved slices

D. on a boot slice



QUESTION 16Which two items are checked on existing Veritas Storage Foundation 6.1 for UNIX systems by the Installation and Upgrade service from Symantec OperationsReadiness Tools (SORT)? (Select two.)

A. existing Symantec packages and patches

B. disk group version

C. file system free space

D. volume manager disk group free space

E. disk drive information

Correct Answer: ACSection: (none)Explanation


QUESTION 17What is the minimum Storage Foundation release supported to upgrade directly to Veritas Storage Foundation 6.1 for UNIX?

A. 5.0

B. 5.0MP1

C. 5.0MP3

D. 5.1

Correct Answer: C


Section: (none)Explanation


QUESTION 18How many days can a customer run Veritas Storage Foundation 6.1 for UNIX without entering a valid license key during installation without receiving warningmessages?

A. 30

B. 45

C. 60

D. 90



QUESTION 19Which two operations can be performed with a Veritas Operations Manager (VOM) Management Server (MS) with all add-ons installed? (Select two.)

A. manage host deployment across the enterprise

B. discover the secure Oracle databases running on the managed host

C. manage user privileges in VEA on the managed host

D. discover Solaris Zones and Solaris LDOMs running on a managed host

E. manage Business Entities

Correct Answer: BESection: (none)Explanation


QUESTION 20Which two statements are true regarding the reporting features in Symantec Mail Security 8300? (Select two.)


A. reporting statistics data for email and IM are tracked by default

B. centralized reporting across more than one Scanner requires a dedicated reporting appliance

C. reports can be scheduled on a daily or weekly basis

D. reports can be saved to a favorites list for easy access

E. report data retention is managed on the same schedule and frequency as log retention

Correct Answer: CDSection: (none)Explanation


QUESTION 21Which command is used to manually configure the Veritas Volume Manager (VxVM) product?

A. vxconfigd

B. vxinstall

C. vxdiskadm

D. vxdctl enable



QUESTION 22Which display command consolidates information from Veritas Volume Manager (VxVM) and Veritas File System (VxFS)?

A. vxprint

B. vxadm

C. vxsfadm

D. vxlist

Correct Answer: DSection: (none)


Explanation


QUESTION 23Which two Veritas Storage Foundation 6.1 for UNIX commands are used to prevent and allow multi-pathing of Veritas Volume Manager (VxVM) devices? (Selecttwo.)


A. vxdiskadm

B. vxddladm

C. fsvoladm

D. vxdmpadm

E. vxsfadm

Correct Answer: ADSection: (none)Explanation


QUESTION 24What is the function of the Symantec Mail Security 8300 Transformation Engine?

A. Based on configured policies, it performs the required actions on the message

B. Based on configured policies, it scans the message for attributes and violations

C. Based on default policies, it stores spam and virus messages

D. Based on default policies, it provides automated synchronization from LDAP




QUESTION 25Which Veritas Storage Foundation 6.1 for UNIX user interface provides a menu-driven, text-based interface for performing some disk and disk groupadministration?

A. Veritas Enterprise Administrator (VEA)

B. Veritas Operations Manager (VOM)

C. vxedit

D. vxdiskadm



QUESTION 26Which command can be run from the command line interface of a Scanner appliance to list, backup or restore the current message audit logging logs?

A. nslookup

B. ipconfig

C. malquery

D. mallog



QUESTION 27Which statement is true regarding the encrypted attachment disposition in the Virus policy settings?

A. it is a subset of the 'unscannable' disposition

B. it leverages TLS or gateway to gateway encryption


C. the default action is to delete

D. it also includes password protected files



QUESTION 28A server with one disk group is running Veritas Storage Foundation 6.1 for UNIX and suffers a system board failure. An administrator moves the disks in that diskgroup to a new server. When the administrator tries to import the disk group, the import fails.Which command should the administrator use to successfully import the disk group?

A. vxdg -C import

B. vxdg -f import

C. vxdg -n newname import

D. vxdg -t import



QUESTION 29Which command can an administrator run to display all of the imported and deported disk groups for a system?

A. vxdg

B. vxlist

C. vxddladm

D. vxconfig




QUESTION 30A Veritas Volume Manager (VxVM) disk named Disk_4 has been removed from the datadg disk group.Which command is used to remove this disk from Veritas Volume Manager (VxVM) control?

A. vxdisk -g datadgrmdisk Disk_4

B. vxdiskunsetup Disk_4

C. vxdg -g datadgrmdisk Disk_4

D. vxdisksetup -r Disk_4



QUESTION 31Which component do you configure to enable the Instant Messaging security proxy?


A. Premium Content Control

B. Control Center

C. Conduit

D. Scanner




QUESTION 32What is the default private region size for Veritas Volume Manager (VxVM) disks?

A. 8MB

B. 16MB

C. 32MB

D. 64MB



QUESTION 33A volume manager disk, EMC_10, in diskgroupappdg is used for a 30G simple volume and it is mounted. An administrator needs to relocate the disk EMC_10 andits associated volume from diskgroupappdg to webdg while preserving the user data.Which command(s) should the administrator use after unmounting the file system?

A. vxdisk reclaim EMC_10; vxdg -g webdgadddisk EMC_10

B. vxdg -g appdgrmdisk EMC_10; vxdg -g webdgaddisk EMC_10

C. vxdg move appdgwebdg EMC_10

D. vxdg migrate appdgwebdg EMC_10



QUESTION 34An administrator plans to move disks EMC_11 and EMC_12 from diskgroupappdg to diskgroupwebdg. There are several volumes residing on both disks, so theadministrator needs a list of volumes that will be affected for planning purposes.Which command should the administrator use to generate the list?

A. vxdglistcloneappdgwebdg

B. vxdglistmeta EMC_11 EMC_12


C. vxdg list appdgwebdg

D. vxdglistmoveappdgwebdg EMC_11 EMC_12



QUESTION 35Which two commands can be used to determine the approximate amount of free space in a diskgroup? (Select two.)

A. vxdisk

B. vxassist

C. vxdiskadm

D. vxdg

E. vxdefault



QUESTION 36What does the System Locale setting control?

A. language to use for display and reporting

B. time zone for the region in which a Scanner is deployed

C. format of numbers, dates, and time for Symantec Mail Security 8300

D. language to use for viewing quarantine




QUESTION 37Which command-line option allows you to download the most recent version of the system software?

A. update download

B. swupdate

C. swupdate download

D. update install



QUESTION 38Which command suppresses a controller from DMP?

A. vxdmpadm

B. vxdiskadm

C. vxdmp -c1 -o suppress

D. vxdisk set c1 suppress



QUESTION 39What does the command vxprint -v display?

A. verbose information about the volume creation

B. volume and layout information only

C. volume name and device information only

D. volume information only




QUESTION 40Which volume layout is most resilient to disk failure?


A. mirror

B. layered

C. stripe

D. concatenated



QUESTION 41Given the following command: vxassist -g datadg make datavol 10g layout=stripe !ctrl:c2 Which instruction does the !ctrl:c2 attribute prompt Veritas Storage Foundation 6.1 for UNIX to follow?

A. to exclude devices connected to controller c2

B. to use only devices connected to controller c2

C. to use two LUNs to create the volume

D. to stripe across LUNs on c2 only

Correct Answer: A




QUESTION 42What is the default volume layout used by the vxassist command?

A. layered

B. striped

C. mirrored

D. concatenated



QUESTION 43An organization is trading in an array and needs to securely clean file system data.Which command should the administrator use to shred the data?

A. vxassist

B. vxdiskunsetup

C. mkfs

D. fsadm



QUESTION 44When using vxassist to create a volume, what is the default unit of the parameter length?


A. bit

B. byte

C. sector

D. cylinder



QUESTION 45Which option allows creation of various RAID levels when using the vxassist utility?

A. raid=

B. type=

C. level=

D. layout=



QUESTION 46What is the recommended placement of the Symantec Mail Security 8300 product in the network?

A. at the perimeter of the network

B. behind other SMTP filtering products

C. behind other SMTP relays

D. directly in front of the firewall




QUESTION 47Which command allows the removal of a mirror from a volume?

A. vxvol

B. vxmirror

C. vxplex

D. vxdiskadm



QUESTION 48In which two situations is a Data Change Log automatically created when mirroring an existing volume? (Select two.)

A. Any time a volume is mirrored.

B. The volume was created on thick LUNs.

C. SmartMove is enabled on the volume.

D. The volume is larger than 1G.

E. The volume was created on thin LUNs.

Correct Answer: CESection: (none)Explanation


QUESTION 49How do you display the default email virus policies within the Control Center?

A. Select the Virus tab and then select Settings

B. Select the Policies link and then select Virus


C. Select the Virus tab and then select Email in the Policies section

D. Select Policies and then Settings



QUESTION 50Refer to the exhibit. How many log plexes exist in the volume?


A. 0

B. 1

C. 2

D. 6



QUESTION 51How does the LDAP synchronization process treat mail-enabled groups?

A. as a user list

B. as a distribution list

C. as domain groups


D. as an LDAP list



QUESTION 52Which two statements are true regarding the LiveUpdate section in the Virus settings area? (Select two.)

A. Certified (or Platinum) definitions are enabled by default.

B. A LiveUpdate can be initiated on demand.

C. Rapid Response definitions are enabled by default.

D. Rapid Response definitions can be scheduled on a daily or weekly basis.

E. An intermediate proxy server is required for any virus definition download.



QUESTION 53Refer to the exhibit. What is the layout of the volume?

A. concat-mirror

B. mirror-stripe

C. mirror-concat

D. stripe-mirror




QUESTION 54Which vxassist parameter is used to set the number of data plexes in a non-layered mirrored volume?

A. nplex

B. nmirror

C. plex

D. ndisk



QUESTION 55What does the following command do?vxassist -g hrdg mirror payroll hrdg03

A. mirrors the hrdg03 volume

B. fails to complete

C. lists the disk under disk group hrdg

D. mirrors the payroll volume



QUESTION 56Refer to the exhibit. The appvol volume contains a Veritas File System (VxFS) file system and is mounted to /app. The volume has experienced multiple disk failures.What is the state of the data on the mounted file system?


A. unavailable

B. corrupted

C. partially available

D. fully accessible



QUESTION 57An administrator only has the inode number of a file.Which command should the administrator run to get the full path name for the file?

A. fsadm

B. fsmap

C. fsapadm

D. ff



QUESTION 58Which command updates a Veritas File System (VxFS) layout from version 7 to version 8?

A. vxrelayout

B. vxupgrade

C. fsadm

D. vxfsconvert




QUESTION 59A system with a single, locally mounted file system loses power and is subsequently restarted. All hardware is functioning properly and the intent log is valid. Theadministrator then mounts the file system using the mount command.What is the expected behavior?

A. Mount will replay the intent log.

B. Mount prints an error stating that afsck log replay will be required.

C. Mount succeeds silently as normal.

D. Mount prints an error message stating that a full fsck will be required.



QUESTION 60What is the default block size for a 2TB file system?

A. 1024

B. 2048

C. 4096

D. 8192



QUESTION 61Which command is used to grow a Veritas File System (VxFS)?

A. fsmigadm


B. fsadm

C. fsppadm

D. vxfsconvert



QUESTION 62Veritas File System (VxFS) is an extent based file system.Which two pieces of information form the basis of an extent? (Select two.)


A. inode number

B. offset

C. length

D. owner's UID

E. block size



QUESTION 63Which two Veritas Storage Foundation 6.1 for UNIX components are required to perform thin reclamation on a thin provision capable array? (Select two.)

A. Dynamic Multi-Pathing

B. Veritas Operations Manager (VOM)


C. FlashSnap

D. Veritas File System (VxFS)

E. Intelligent Storage Provisioning (ISP)



QUESTION 64What are two benefits of SmartMove? (Select two.)

A. faster plex creation

B. faster disk group deport

C. reduced file system consistency checks

D. reduced storage requirements

E. faster sequential I/O performance



QUESTION 65Why is FastResync enabled automatically for volumes created on thin LUNs?

A. Volumes based on thin LUNs are more likely to require resync than volumes based on thick LUNs.

B. To ensure thin LUNs remain thin should resync be required.

C. To ensure data written to volumes based on thin LUNs is persistent.

D. Resync for volumes based on thin LUNs is slower than resync for volumes based on thick LUNs and FastResync bridges this performance gap.




QUESTION 66Which two commands are used for thin reclamation? (Select two.)

A. fsadm

B. vxdctl

C. vxdisk

D. vxtune

E. fsmap

Correct Answer: ACSection: (none)Explanation


QUESTION 67Which command displays thin provisioning capable devices?

A. vxdisk

B. vxdefault

C. vxddladm

D. vxdmpadm



QUESTION 68Which Symantec Mail Security 8300 option protects against spammers who forge mail server names to evade discovery?

A. Spammer deviation

B. Sender policy framework


C. Discovery recognition

D. Sender authentication standard



QUESTION 69Which command attempts to repair a missing disk access record by finding the name of the device in the private region and matching it to an existing disk mediarecord?

A. vxdisk

B. vxdctl

C. vxreattach

D. vxrecover



QUESTION 70Which switch needs to be added to the vxdg -g diskgroupadddiskdisk_name command to force Veritas Volume Manager (VxVM) to take the disk media name of thefailed disk and assign it to a replacement disk?

A. -force

B. -k

C. -f

D. -assign




QUESTION 71What is required when restoring a backup from one Symantec Mail Security 8300 appliance to a different physical Symantec Mail Security 8300 appliance?


A. The software versions on the underlying appliances must be identical.

B. The hardware models must be identical.

C. A full backup must be initiated.

D. The group policies configured on the two systems must be identical.



QUESTION 72How many IP addresses are required to filter inbound and outbound mail on the same Scanner?

A. One

B. Two

C. Three

D. Four



QUESTION 73


What is the definition of the disk status FAILING?

A. uncorrectable I/O failure(s) on the public region; private region accessible

B. uncorrectable I/O failure(s) on the public region; private region inaccessible

C. uncorrectable I/O failure(s) on both the public and private regions

D. uncorrectable I/O failure(s) on private region; public region accessible



QUESTION 74What does the TEMPRMSD plex state indicate?

A. The plex is synchronized.

B. The plex is removed.

C. The plex is detaching.

D. The plex is synchronizing.



QUESTION 75File system write performance starts to be affected on mirrored volumes assigned to a specific disk array. A path failure is suspected.Which two commands could be used to determine the controllers to the specified disk array? (Select two.)

A. vxlist

B. vxdisk

C. vxddladm

D. vxprint

E. vxdmpadm


Correct Answer: BESection: (none)Explanation


QUESTION 76The file system Storage Checkpoint Visibility feature is configured when mounting the primary fileset.What are the possible configuration options?

A. ro, off, rw

B. auto, ondemand

C. ondemand, remove

D. yes, no, error



QUESTION 77What can be done while deporting a disk group using Veritas Operations Manager (VOM)?

A. some of the disks can be assigned to a new disk group

B. the disk group version can be upgraded to the latest version available

C. the name of the host, which will import the disk group at reboot, can be specified

D. the disk group can be split into two new disk groups



QUESTION 78Which two Veritas Operations Manager (VOM) add-ons are deployed by default? (Select two.)


A. Veritas Storage Foundation Add-on for Storage Provisioning

B. Veritas Operations Manager Add-on for VCS Administration

C. Veritas Operations Manager Control Host Add-on

D. Veritas Operations Manager Add-on for SF Administration

E. Veritas Operations Manager Add-on for Storage Foundation Administration for UNIX



QUESTION 79What is the namespace extension required to perform FileSnap over NFS?

A. ::clone:vxfs:

B. ::snap:vxfs:

C. ::filesnap:vxfs:

D. ::ckptfile:vxfs:



QUESTION 80Which option can be selected for the log level from the Veritas Operations Manager (VOM) Management Server setting page?


A. Critical


B. Error

C. Warning

D. Notice



QUESTION 81Which two Symantec Mail Security 8300 Control Center components can be used to store email security violations? (Select two.)

A. Suspect virus quarantine

B. Email virus logging

C. Message audit logs

D. Email spam quarantine

E. Instant message quarantine



QUESTION 82Which command is used to display current file system I/O parameters for a Veritas File System (VxFS)?

A. vxtune

B. vxtunefs

C. vxfsio

D. fsadm




QUESTION 83An administrator suspects that file creation performance is degraded in several directories on a Veritas File System (VxFS).Which command should be used to analyze directory organization?

A. fsadm

B. fiostat

C. fsapadm

D. fsppadm



QUESTION 84A file is compressed using vxcompress with a strength of 3. The owner subsequently needs to change it to a strength of 9.Which steps must the owner take?

A. unmount file system, remount with new tunables

B. rename the file, recompress with strength 9

C. uncompress file, recompress with strength 9

D. rerun vxcompress with strength 9



QUESTION 85Which Storage Foundation utility is used to generate random read and random write workloads so that the performance of a file system can be analyzed?

A. vxbench

B. vxtrace


C. vxstat

D. vmstat



QUESTION 86What is the primary purpose of Compliance Folders?

A. to block attempts to send confidential information outside the organization

B. to monitor, track, and remediate violations of a policy

C. to provide access to the document storage repository to monitor potential policy violations

D. to store archived messages



QUESTION 87Which command is used to gather buffer cache statistics for a Veritas File System (VxFS)?

A. fiostat

B. vxstat

C. vxfsstat

D. vxmemstat




QUESTION 88A disk group with four disks contains a two-column striped and mirrored volume.Which step must be performed first to change the volume to have three columns without losing the redundancy?

A. use the vxassist command to relayout the volume

B. use the vxrelayout command to relayout the volume

C. use the vxassist command to convert the volume

D. use the vxdg command to add two disks to the disk group



QUESTION 89The vxassist convert command can be used to convert between which two volume layouts? (Select two.)


A. mirror-stripe to stripe-mirror

B. mirror-stripe to RAID-5

C. concat-mirror to concat

D. mirror-stripe to stripe

E. concat-mirror to mirror-concat

Correct Answer: AESection: (none)Explanation



QUESTION 90Which firewall port should be opened to download antispamrulesets from Symantec?

A. 80

B. 443

C. 41025

D. 41443



QUESTION 91On which two areas on the Control Center can you view license expiration status? (Select two.)

A. On the Control Center Dashboard

B. On the Licenses page

C. On the Alerts page

D. On the License Summary Report



QUESTION 92What is a restriction for the volume relayout operation?

A. The file systems must be unmounted.

B. I/O to the file system must be stopped.

C. The file system must be checked for consistency.

D. The file systems must support online resizing.

Correct Answer: D




QUESTION 93What happens when a mirrored volume is converted to RAID-5?

A. All plexes of the mirrored volume are converted to RAID-5.

B. One plex is converted to RAID-5 and all other plexes are removed.

C. The number of plexes converted depends on how many columns the RAID-5 volume has.

D. The number of plexes converted depends on the stripe unit size.



QUESTION 94If a system fails during a volume relayout, what happens to the transformation after the system is restored?

A. Transformation continues after the system is restored.

B. Volume configuration can be restored from config copy backed up by vxconfigdbackupd.

C. Transformation is reversed and may have to be repeated manually.

D. Data may become corrupted and may have to be restored from backup.



QUESTION 95Which command should be used to manage the contents of volboot?

A. vxvolboot


B. vxdctl

C. vxedit

D. vxconfigd



QUESTION 96Which setting adjustment can improve LDAP performance?

A. changing the default LDAP port from the standard port (389) to the Global Catalog Port (3268)

B. always enforcing a full synchronization

C. setting the LDAP replication frequency to 4 hours

D. clearing the 'Ignore LDAP Referrals' check box



QUESTION 97Which component of the Dynamic Multi-Pathing (DMP) architecture allows DMP to properly claim devices and defines the array class (e.g., A/A, A/P, APF, ALUA)?

A. Device Discovery Layer

B. Array Support Library

C. Array Policy Module

D. Hardware Compatibility List




QUESTION 98A system administrator has been notified by Symantec Operations Readiness Tools (SORT) that a new version of the Array Support Library/Array Policy Modulespackage is available. The administrator first removes the old VRTSaslapm package and then installs the new one.What is the final command that must be executed to complete the upgrade?


A. vxdmpadm -U cfgapm all

B. vxdisk scandisks

C. vxddladmincludearray all

D. vxdctl upgrade



QUESTION 99When should an administrator use the remount option with the mount command on a local Veritas File System (VxFS)?

A. if the file system was accidentally unmounted

B. when updating mount options

C. after a file system corruption

D. to mount the file system in multiple places




QUESTION 100An administrator is unable to receive output from vxprint, vxdisk list, or other reporting commands but does have access to volumes and file system data.What is the likely cause of this problem?

A. vxconfigd has stopped running.

B. vxdctl has stopped running.

C. A disk has failed.

D. The disk.info file is corrupt.



QUESTION 101Which command displays the number of paths for disk hds9500-alua0_57?

A. vxdisk -p list hds9500-alua0_57

B. vxdisk scandisk hds9500-alua0_57

C. vxdmpadm list hds9500-alua0_57

D. vxdisk list hds9500-alua0_57



QUESTION 102Which three are valid configuration options when working with compliance folders? (Select three.)

A. the format of the notification email

B. the incident archive tag

C. the retention time for compliance incidents

D. the maximum size for all compliance folders


Correct Answer: ABDSection: (none)Explanation


QUESTION 103By default, how many times will Dynamic Multi-Pathing (DMP) retry a failed I/O request for a single path?

A. 2

B. 3

C. 4

D. 5



QUESTION 104Which two are reports provided by Symantec Mail Security 8300? (Select two.)

A. Executive Summary

B. Reputation Summary

C. Hardware Utilization Summary

D. IM Compliance Summary

E. Capacity Planning Summary



QUESTION 105The Concurrent I/O (CIO) option is enabled for a mounted Veritas File System (VxFS).


What must be done to disable it?

A. use the remount option to the mount command without specifying cio

B. unmount the file system and then mount it again without specifying cio

C. runvxtunefs

D. run vxtune



QUESTION 106Which command should be used to determine the existing Array Support Libraries (ASL) and supported disk arrays on an existing system?


A. vxprint

B. vxddladm

C. vxdmpadm

D. vxcheckasl



QUESTION 107What is the major source of IP reputation information for the Symantec Sender Reputation Service?

A. SMTP traffic shaping results


B. 3rd party real-time blacklist services

C. The Probe Network

D. customer submissions



QUESTION 108Which command is required to make changes in I/O policies for multiple paths persistent?

A. vxdmpadm

B. vxdctl

C. vxtune

D. vxddladm



QUESTION 109Which two can be managed with group policies? (Select two.)

A. Invalid recipient handling

B. Antispam protection

C. File transfers over IM

D. SMTP Traffic Shaping

E. Allowed Sender Lists




QUESTION 110Which information is required when backing up the system to a remote location using the Control Center?

A. a username and host to facilitate secure copy protocol (SCP) transfer

B. the domain, port, and path of the ftp server

C. the directory where the compressed backup should be downloaded

D. the IP address of the dedicated backup appliance



QUESTION 111Which two fields must be configured to identify the LDAP server? (Select two.)

A. Host

B. Port

C. Name (Bind DN)

D. Password

E. Username



QUESTION 112When creating a traditional third mirror breakoff snapshot, which plex state indicates that the snapshot is ready?

A. ACTIVE

B. SNAPTMP


C. SNAPDONE

D. SNAPATT



QUESTION 113Which Veritas File System (VxFS) I/O error policy will place the file system into a degraded state upon a metadata write failure?

A. nodisable

B. wdisable

C. mwdisable

D. mdisable



QUESTION 114During which stage of the installation process is external Internet connectivity mandatory?

A. when racking the appliance

B. during the registration phase of the Site Setup Wizard

C. during the bootstrap phase

D. when physically connecting the appliance to the network




QUESTION 115Which two are benefits of using IM security features of Symantec Mail Security 8300? (Select two.)

A. enables disclaimers in IM traffic

B. provides support for enterprise IM systems

C. allows administrator to restrict/allow IM use by network

D. archives IM traffic

E. enables security proxy for public IM traffic

Correct Answer: CESection: (none)Explanation


QUESTION 116A snapshot is created under the command vxassistsnapstart and successfully completes. The server is subsequently rebooted.What is the snapshot plex state after the server has come completely online?

A. SNAPCOMPLETE

B. SNAPATT

C. SNAPDONE

D. SNAPRECOVER



QUESTION 117Deduplication is controlled at which level?

A. file system

B. disk group

C. directory


D. volume




Veritas.Testinsides.VCS-255.v2017-01-05.by.linda · Which benefit is provided when Veritas Volume Manager (VxVM) uses the SmartMove feature? A. optimized Data Deduplication process

Documents