DIESEL ENGINE Engine: 4 cylinders, direct injection, water cooled, paper dry filter. Emissioned according to Directive CE 97/68 stage IIIA. Type ................................................... Yanmar 4TNV88 Max power .............................................36kW - 50 HP Rated rpm ....................................................... 3.000 Net power ISO/TR 14396 .......................35 kW - 48 HP Net power EEC/80/1269 .......................35 kW - 48 HP Bore ......................................................... mm 88 Stroke ...................................................... mm 90 Displacement ............................................ cm 3 2.190 ELECTRIC SYSTEM Battery ............................................................ 12 Volt Capacity EN 60095-1 .............................. 80 Ah - 770 A Alternatore ......................................................... 65 A Alternator rating ........................................... Standard Wiring according to ......................... IP 67 e DIN 40050 TRANSMISSION Hydrostatic transmission with automatic power regulation and closed circuit with variable-displacement pump and engine. Two forward/reverse speeds with single-lever control. AXLES Two heavy duty axles with planetary final drives in each wheel. All wheel drive. Fixed rigid drive axle on front chassis section. Oscillating drive axle on rear chassis section up to a total angle of 20°. Transfer gearbox transferring movement directly to the rear and to the front via a transmission shaft. Self-locking limited slip differential on front axle (optional on rear axle). BRAKES Service: disk brake hydraulically operating on front axle, working on all wheels. Parking brake: mechanical disk brake operating on service brake, manually actuated. TYRES Standard ..................................................... 12.0-16,5 Optional ........ • 31x15.50-15 • 420/55 R17 • 11 LR16 STEERING Servo assisted steering hydraulic LOAD SENSING system. Total steering angle ............................................................ 90° Inner tyres turning radius ............................ mm 1.600 External tyres turning radius ........................ mm 3.136 External bucket turning radius ...................... mm 3.565 HYDRAULIC SYSTEM Hydraulic gear pump with LOAD SENSING priority valve for steering circuit. 4-section modular control valve with main relief valve. Double-acting hydraulic cylinders. Hydraulic oil cooling radiator. Full-flow oil filter on the return line. Single cloche-lever arm control with 4-position lifting system, button for auxiliary system and buttons for telescopic function. Max flow .................................................. lt/1’ 58 Loader relief valve pressure ........................ bar 190 Steering relief valve pressure ...................... bar 190 Lift cylinder .............................................. mm 100x70 Bucket cylinder ......................................... mm 115x60 SERVICE CAPACITIES Engine ...................................................... lt 8 Front axle ................................................ lt 5,8 Rear axle + gear box ................................... lt 6,5 Hydraulic circuit ......................................... lt 50 Brake system ............................................ lt 1,1 Fuel .......................................................... lt 50 Water cooling ............................................ lt 9 TECHNICAL FEATURES Standard bucket capacity ............................ m 3 0,5 Standard bucket width................................. mm 1.500 Straight static tipping load ........................... kg 2.400 Full turned 45° tipping load ........................... kg 2.040 Dump height at 37° ..................................... mm 3.190 Reach at 37° .............................................. mm 1.295 Breakout force ........................................... kg 2.700 Hinge pin height - telescopic retracted........... kg 3.062 Hinge pin height - telescopic extended ........... kg 3.930 Maximum loading height with forks - telescopic extended ................................... mm 3700 DIMENSIONS AND WEIGHTS Max lenght in transfer position ..................... mm 4.800 Max width in transfer position ...................... mm 1.500 Max height ................................................. mm 2.250 Track width - standard tyres ......................... mm 1.170 Overall standard tyre width .......................... mm 1.495 Wheel base ................................................ mm 1.950 Ground clearance ....................................... mm 345 Standard operating weight (Canopy version) ... kg 3.600 Max permissible weight .............................. kg 4.000 Speed Forward Backward 1 st gear km/h 0÷8 0÷8 2 nd gear km/h 0÷40* 0÷40* * with 420/55 R17 tyres 1.63TL WHEEL LOADER TELESCOPIC ARM PRELIMINARY
WHEEL LOADER TELESCOPIC ARM PRELIMINARY - VENIERI · 2019. 5. 2. · e-mail: [email protected] . Spare Parts. Tel. +39 0545 904429 Fax +39 0545 24555 e-mail: [email protected].
Feb 01, 2021
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
-
DIESEL ENGINE
Engine: 4 cylinders, direct injection, water cooled, paperdry filter.Emissioned according to Directive CE 97/68 stage IIIA.
Type ................................................... Yanmar 4TNV88 Max power .............................................36kW - 50 HP Rated rpm ....................................................... 3.000Net power ISO/TR 14396 .......................35 kW - 48 HPNet power EEC/80/1269 .......................35 kW - 48 HPBore ......................................................... mm 88Stroke ...................................................... mm 90Displacement ............................................ cm3 2.190
ELECTRIC SYSTEM
Battery ............................................................12 VoltCapacity EN 60095-1 ..............................80 Ah - 770 AAlternatore ......................................................... 65 AAlternator rating ........................................... StandardWiring according to ......................... IP 67 e DIN 40050
TRANSMISSION
Hydrostatic transmission with automatic power regulation and closed circuit with variable-displacement pump and engine. Two forward/reverse speeds with single-lever control.
AXLES
Two heavy duty axles with planetary final drives in each wheel. All wheel drive.Fixed rigid drive axle on front chassis section.Oscillating drive axle on rear chassis section up to a total angle of 20°.Transfer gearbox transferring movement directly to the rear and to the front via a transmission shaft. Self-locking limited slip differential on front axle (optional on rear axle).
BRAKES
Service: disk brake hydraulically operating on front axle, working on all wheels. Parking brake: mechanical disk brake operating on service brake, manually actuated.
TYRES
Standard ..................................................... 12.0-16,5Optional ........ • 31x15.50-15 • 420/55 R17 • 11 LR16
STEERING
Servo assisted steering hydraulic LOAD SENSING system.
Total steering angle ............................................................ 90°Inner tyres turning radius ............................ mm 1.600External tyres turning radius ........................ mm 3.136External bucket turning radius ...................... mm 3.565
HYDRAULIC SYSTEM
Hydraulic gear pump with LOAD SENSING priority valve for steering circuit. 4-section modular control valve with main relief valve. Double-acting hydraulic cylinders. Hydraulic oil cooling radiator. Full-flow oil filter on the return line. Single cloche-lever arm control with 4-position lifting system, button for auxiliary system and buttons for telescopic function.
Max flow .................................................. lt/1’ 58Loader relief valve pressure ........................ bar 190Steering relief valve pressure ...................... bar 190Lift cylinder .............................................. mm 100x70Bucket cylinder ......................................... mm 115x60
SERVICE CAPACITIES
Engine ...................................................... lt 8Front axle ................................................ lt 5,8Rear axle + gear box ................................... lt 6,5Hydraulic circuit ......................................... lt 50Brake system ............................................ lt 1,1Fuel .......................................................... lt 50Water cooling ............................................ lt 9
TECHNICAL FEATURES
Standard bucket capacity ............................ m3 0,5Standard bucket width ................................. mm 1.500Straight static tipping load ........................... kg 2.400Full turned 45° tipping load ........................... kg 2.040Dump height at 37° ..................................... mm 3.190Reach at 37° .............................................. mm 1.295Breakout force ........................................... kg 2.700Hinge pin height - telescopic retracted........... kg 3.062Hinge pin height - telescopic extended ........... kg 3.930Maximum loading height with forks -telescopic extended ................................... mm 3700
DIMENSIONS AND WEIGHTS
Max lenght in transfer position ..................... mm 4.800Max width in transfer position ...................... mm 1.500Max height ................................................. mm 2.250Track width - standard tyres ......................... mm 1.170Overall standard tyre width .......................... mm 1.495Wheel base ................................................ mm 1.950Ground clearance ....................................... mm 345Standard operating weight (Canopy version) ... kg 3.600Max permissible weight .............................. kg 4.000
Speed Forward Backward 1st gear km/h 0÷8 0÷82nd gear km/h 0÷40* 0÷40*
*with 420/55 R17 tyres
1.63 TLWHEEL LOADER
TELESCOPIC ARM
P R E L I M I N A R Y
-
PERFORMANCE DATA UNIVERSAL BUCKET FORKS
Full load bucket capacity (SAE) m3 0,5 /
Density t/m3 1,8 /
Bucket width mm 1.500 /
Bucket weight kg 180 /
Forks lenghth (standard) mm 1.000
Forks lenghth (optional) mm 1.200
Dump clearance ° 37 /
Dump height mm 3.190 /
Dump distance mm 1.295 /
Bucket static tipping load, telescopic retracted straight kg 2.400 /
Bucket static tipping load, full turn (45°) kg 2.040 /
Forks static tipping load, full turn (45°) kg 1.600
Payload EN 474-3 (80%) kg 1.250
Payload EN 474-3 (60%) kg 950
Breakout force kg 2.700 /
Total lenght mm 4.800 /
External bucket turning radius mm 3.565
Standard operating weight (Canopy version) kg 3.600 3.600
1950 1775
37°
1075
4800
2250
1295
37°
112
1950 17951075
2250
1665
78
500
3700
3930
3190
Via Piratello, 106 - 48022 Lugo (RA) ITALYTel. +39 0545 904411 Fax +39 0545 30389e-mail: [email protected] www.vf-venieri.comSpare PartsTel. +39 0545 904429 Fax +39 0545 24555e-mail: [email protected]
The illustrations on the present folder do not necessarily show the product standard version. Data and dimensions described in this folder are not binding.Venieri reserves the right of carrying out possible changes at any time and without previous notice because of its policy of steady developement and improvement of the products.
UP163TL_B-EN
1.63 TLWHEEL LOADER
TELESCOPIC ARM
P R E L I M I N A R Y
Related Documents
