What is Materials Science/Engineering? Processing Structure Properties Materials Ceramics Metals Polymers Semiconductors Composites Bonding Order/disorder Atomic arrangements Defects Mechanical Electrical Magnetic Environmental Optical Thermal … Length scales: atom (Å) -> ~ mm
12
Embed
What is Materials Science/Engineering?matclass/101/pdffiles/Lecture_1.pdf · What is Materials Science/Engineering? Processing ... Callister 6e. Micrographs adapted ... Fracture Mechanics
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
What is Materials Science/Engineering?
Processing
Structure PropertiesMaterials
CeramicsMetalsPolymersSemiconductorsComposites
BondingOrder/disorderAtomic arrangementsDefects
MechanicalElectricalMagneticEnvironmentalOpticalThermal…Length scales: atom (Å) -> ~ mm
2. The science of describing crystalline materials: Crystallography
3. Defects in materials
Aluminum - metallic Sodium chloride (salt) -ionic
1 nm
“seeing atom arrangements in crystals”: transmission electron
microscopy of thin Sc2O3 foil
Structure, Processing, & Properties
ex: hardness vs structure of steel• Properties depend on structure
Data obtained from Figs. 10.21(a)and 10.23 with 4wt%C composition,and from Fig. 11.13 and associateddiscussion, Callister 6e.Micrographs adapted from (a) Fig.10.10; (b) Fig. 9.27;(c) Fig. 10.24;and (d) Fig. 10.12, Callister 6e.
ex: structure vs cooling rate of steel• Processing can change structure
Material Identify required Processing3.Processing: changes structure and overall shapeex: casting, sintering, vapor deposition, doping
forming, joining, annealing.
3
ELECTRICAL
T (°C)-200 -100 0
Cu + 3.32 at%Ni
Cu + 2.16 at%Ni
deformed Cu + 1.12 at%Ni
1
2
3
4
5
6
Re
sist
ivit
y, ρ
(1
0-8
Oh
m-m
)
0
Cu + 1.12 at%Ni
“Pure” Cu
• Electrical Resistivity of Copper:
Adapted from Fig. 18.8, Callister 6e.(Fig. 18.8 adapted from: J.O. Linde,Ann Physik 5, 219 (1932); andC.A. Wert and R.M. Thomson,Physics of Solids, 2nd edition,McGraw-Hill Company, New York,1970.)
• Adding “impurity” atoms to Cu increases resistivity.• Deforming Cu increases resistivity.
4
THERMAL
• Space Shuttle Tiles:--Silica fiber insulation
offers low heat conduction.
• Thermal Conductivityof Copper:--It decreases when
you add zinc!
Composition (wt%Zinc)Th
erm
al C
on
du
cti
vity
(W
/m-K
)
400
300
200
100
00 10 20 30 40
5
Fig. 19.0, Callister 6e.(Courtesy of LockheedMissiles and SpaceCompany, Inc.)
100µm
Adapted fromFig. 19.4W, Callister 6e. (Courtesy of Lockheed Aerospace Ceramics Systems, Sunnyvale, CA)(Note: "W" denotes fig. is on CD-ROM.)
Adapted from Fig. 19.4, Callister 6e.(Fig. 19.4 is adapted from Metals Handbook: Properties and Selection: Nonferrous alloys and Pure Metals, Vol. 2, 9th ed., H. Baker, (Managing Editor), American Society for Metals, 1979, p. 315.)
MAGNETIC
• Magnetic Permeabilityvs. Composition:--Adding 3 atomic % Si
makes Fe a betterrecording medium!
Fig. 20.18, Callister 6e.(Fig. 20.18 is from J.U. Lemke, MRS Bulletin,Vol. XV, No. 3, p. 31, 1990.)
• Magnetic Storage:--Recording medium
is magnetized byrecording head.
Magnetic FieldMa
gn
eti
zati
on
Fe+3%Si
Fe
Adapted from C.R. Barrett, W.D. Nix, andA.S. Tetelman, The Principles ofEngineering Materials, Fig. 1-7(a), p. 9,1973. Electronically reproducedby permission of Pearson Education, Inc.,Upper Saddle River, New Jersey.
6
OPTICAL
• Transmittance:--Aluminum oxide may be transparent, translucent, or
opaque depending on the material structure.
Adapted from Fig. 1.2,Callister 6e.(Specimen preparation,P.A. Lessing; photo by J. Telford.)
single crystalpolycrystal:low porosity
polycrystal:high porosity
7
DETERIORATIVE
• Stress & Saltwater...--causes cracks!
• Heat treatment: slowscrack speed in salt water!
“held at 160C for 1hr before testing”
increasing loadcra
ck
spe
ed
(m
/s)
“as-is”
10-10
10-8
Alloy 7178 tested in saturated aqueous NaCl solution at 23C
Adapted from Fig. 11.20(b), R.W. Hertzberg, "Deformation and Fracture Mechanics of Engineering Materials" (4th ed.), p. 505, John Wiley and Sons, 1996. (Original source: Markus O. Speidel, Brown Boveri Co.)
Adapted from Fig. 17.0, Callister 6e.(Fig. 17.0 is from Marine Corrosion, Causes, and Prevention, John Wiley and Sons, Inc., 1975.) 4µm--material:
7150-T651 Al "alloy"(Zn,Cu,Mg,Zr)
8
Adapted from Fig. 11.24,Callister 6e. (Fig. 11.24 provided courtesy of G.H.Narayanan and A.G. Miller, Boeing CommercialAirplane Company.)
SUMMARY
Course Goals:
• Use the right material for the job.
• Understand the relation between properties,structure, and processing.
• Recognize new design opportunities offeredby materials selection.