MAXKOTE https://www.maxkote.co.uk/ & ITS USES WHAT IS ANTI STATIC FLOOR PAINT?
What is Anti Static Floor Paint? & Uses
Aug 31, 2022
In the case of anti-static floor paint, the paint contains components that allow electrical current to pass through the coated floor (the most popular being carbon or tin). The current is then transferred to copper tape that is conductive and positioned beneath the floor paint to a grounding point.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
What is Anti Static Floor Paint?WHAT IS
In the case of anti-static floor paint, the paint contains components that allow electrical current to pass through the coated floor (the most popular being carbon or tin). The current is then transferred to copper tape that is conductive and is positioned beneath the floor paint to a grounding point.
Explosion risk areas Hospitals/ operating theatres Chemical factories Electrical component manufacture
TYPICAL USES
All oil and grease must be removed from the surface using an appropriate cleaner such as MEK or a similar solvent. All surfaces must be abrasive blasted to ISO 8501/4 Standard SA2.5 (SSPC SP10/ NACE 2) minimum blast profile of 75 microns using an angular. Once blast cleaned the surface must be degreased and cleaned using MEK or a similar type solvent. All surfaces must be coated before gingering or oxidation.
APPLY? HOW TO
01904 809 773
CONTACT
In the case of anti-static floor paint, the paint contains components that allow electrical current to pass through the coated floor (the most popular being carbon or tin). The current is then transferred to copper tape that is conductive and is positioned beneath the floor paint to a grounding point.
Explosion risk areas Hospitals/ operating theatres Chemical factories Electrical component manufacture
TYPICAL USES
All oil and grease must be removed from the surface using an appropriate cleaner such as MEK or a similar solvent. All surfaces must be abrasive blasted to ISO 8501/4 Standard SA2.5 (SSPC SP10/ NACE 2) minimum blast profile of 75 microns using an angular. Once blast cleaned the surface must be degreased and cleaned using MEK or a similar type solvent. All surfaces must be coated before gingering or oxidation.
APPLY? HOW TO
01904 809 773
CONTACT
Related Documents
