e: [email protected]: 01665 604200 f: 01665 604204
WH-L5LEVER HOIST
williamhackett.co.uk
WH-L5 Lever Hoist
e: [email protected]: 01665 604200 f: 01665 604204 3
The Hackett WH-L5 lever hoist meets and exceeds the
requirements of international standards
BS EN13157:2004 + AI:2009, ASME B30.21-2014,
AS1418.2-1997, SANS 1636:2-2007.
The design and specification of the William Hackett WH-L5 lever hoist includes:
• RANGE: 800kg to 10 tonnes.
• LIGHT LOAD CAPABILITY: the WH-L5 is tested and certified at 2% of the lever hoist rated capacity.
• SAFETY LATCHES: WH-L5 lever hoist top and bottom hooks are fitted with heavy duty cast steel latches creating a strong and robust hook closure.
• OVERLOAD INDICATOR MARKS: WH-L5 lever hoist
top and bottom hooks have, as part of the hook forging,
an overload indicator mark either side of the hook throat. By
measuring the distance between the indicator marks, the
hook can be quickly and easily checked to see if any stretch
has occurred due to misuse or overloading.
• HOOK HOUSING: WH-L4 lever hoist top and bottom hook housing are secured with socket head cap screws/hex head bolts and nyloc insert locking nuts.
• FLEETING/CROSS HAULING: WH-L5 lever hoists are tested and certified for fleeting or cross hauling applications up to 45° from the vertical without deration.
• LOAD CHAIN: WH-L5 lever hoists are fitted with load chain that fully complies with international standards BS EN818-7 Grade T (8) and JIS B8812 Grade V (10).
• TRAVELLING END STOP: available as an option upon request. The travelling end stop can be fitted as a replacement to the standard end stop. The travelling end stop allows the user, when a WH-L5 lever hoist is in position, to move the end stop along the slack chain and position adjacent to the body of the lever hoist. This has the benefits of shortening the slack chain, and stopping any potential ‘run’ of load chain through the hoist when the operator comes to use it again.
• OVERLOAD LIMITER: available as an option upon request.
WH-L5 Lever Hoist
williamhackett.co.uk
Exploded Diagram and Parts List
WH-L5 Lever Hoist
Part Code Part Name
L5.01 Gear coverL5.02 Pinion gearL5.03 Pinion shaftL5.04 Load gearL5.05 Gear side plate assemblyL5.06 BearingL5.07 Load sheaveL5.08 Chain guideL5.09 Chain stripperL5.10 Lever Side plate assemblyL5.11 Pawl springL5.12 PawlL5.13 CirclipL5.14 Disc HubL5.15 Ratchet gear c/w discsL5.16 Brake cover assemblyL5.17 Nyloc NutL5.19 Nyloc NutL5.20 Change gearL5.20L Load limiterL5.21 Change over pawlL5.22 Change over standL5.23 Change over springL5.24 Handle assembly
L5.24A Rubber handleL5.25 Screw
L5.25A WasherL5.26 CamL5.27 SpringL5.28 Grip ringL5.29 SpringL5.30 Spring housingL5.31 Castle nutL5.32 Split pinL5.34 LabelL5.35 Lock nutL5.36 Chain fixing pinL5.37 Latch kitL5.38 Bottom hook assemblyL5.39 Top hook shaftL5.40 Top hook assemblyL5.41 End stop (cast enlarged)L5.42 WasherL5.47 Chain fixing pinL5.48 NutL5.50 Rubber handle nut
L5.50A Rubber handle bolt
e: [email protected]: 01665 604200 f: 01665 604204 5
williamhackett.co.uk
Specifications and Dimensions
WH-L5 Lever Hoist
1.6 tonnes capacity0.8 tonnes capacity
Part Code
Capacity(tonnes)
Capacity Falls
Load Chainmm
Standard Lift(m)
amm
bmm
cmm
dmm
emm
hmm
Masskg
Extra Weightper M
kg
034.080 0.8 1 5.6 x 15.7 1.5 146 119 42 245 27 280 6.1 0.7
034.160 1.6 1 7.1 x 19.9 1.5 164 126 54.5 265 36 335 8.5 1.1
034.320 3.2 1 10 x 28 1.5 196 159 60.5 415 42 395 14.2 2.2
034.630 6.3 2 10 x 28 1.5 196 218 85.5 415 52.5 540 26.6 4.4
034.1000 10.0* 3 10 x 28 1.5 196 298 - 415 59 680 46.5 6.6
*V(10) JIS B 8812:2004 Link Chain for Chain Hoists
a a
e: [email protected]: 01665 604200 f: 01665 604204 7
Specifications and Dimensions
6.3 tonnes capacity3.2 tonnes capacity
10 tonnes capacity
a
a
a
williamhackett.co.uk
FEC Grade T (8) according to BS EN818-7: 2002 FTE seriesFEC Grade V (10) according to JIS B8802 FV series
FEC Calibrated Load Chain
Relevant toLever Hoist
CapacityPart Code a(mm)
b(mm)
c(mm) No. of chain falls
800kg AT2.056.1 5.6 15.7 20 1
1.6t AT2.071.1 7.1 20.1 23.6 1
3.2t AT2.100.1 10 28 34 1
6.3t AT2.100.1 10 28 34 2
10t AV2.100.1 10 28 34 3
Manufacturer’s Name/Year Produced
Country ofmanufacture
DGUV Type test and quality approval stamp and Grade designation
(T) or (V)
LotNo.
This identification mark, together with the test stamp, shall be affixed at intervals not exceeding 1m.
Marking of Chain
b
c
a
© William Hackett 2015