W elding Visual Inspection System ■ Visual and measuring inspection of weld, edges geometry ■ Laser profiling and video recording ■ Reflecting surfaces compatibility ■ Real-time analysis and recording data ■ Wi-fi data transmission ■ Working time up to 8 hours ■ Operating temperature -40..+50 ° С ■ Control of butt joints and T-joints Parameter Value Field of view of the laser scanner, mm depth - 120, beam length 30 ... 110 Max Sampling rate, profiles/s >2000 Measurement error, mm ±0,07 Resolution of laser line, mm 0,025…0,08 Camera resolution 1296 х 976 Camera FPS up to 120 Laser spectrum red (660 nm) or blue (405 nm) Laser Safety Class Type 2 (IEC60825-1) Operation temperature -40…50 °С Measuring Parameters width, height, angles, misaligment edge, undercuts, concavity, bulge, scaly, pore, etc. Software for 3D visualization and analysis supplied in the kit AVICScan Install the system on the weld Scan your weld Select a template of inspected weld or edges, check list of parameters and tolerances Create a measurement report, transfer data to the PC Step 2 Step 4 EASY TO USE Wi-Fi tocuhscreen Protected case Built-in li-ion batteries Height Adjustment LED camera 2D laser Enctodered magnetic wheels Step 1 Step 3 ■ Posible use in automated systems