Welcome. TF Commercial Units Sizes from 150 to 400 MBH Propeller Units Power Vented, Direct Spark Ignition Standard Approved for Commercial & Industrial.

Welcome

TF Commercial Units

• Sizes from 150 to 400 MBH• Propeller Units • Power Vented, Direct Spark

Ignition Standard• Approved for Commercial &

Industrial Applications• 83% Thermal Efficiency• 20 Gauge Jacket Panels with Baked

Enamel Finish• Individual Removable Self Locking

Louver Blades• 25 MBH Per Tube (TF 150 Shown)

Rear View of TF 150• Isolated Control Panel

• Power Venter Assembly Sized to the Particular Unit Size

• Direct Spark Ignition

• Spark Ignited Pilot (Honeywell S8600) System Utilized on Two Stage Units

• Exterior Terminal Strip

• Fan Vent Panel Constructed of Aluminized Steel

Optional Accessories

• OSHA Type Fan Guard (Finger Guard) when Installations are Under 8 Feet in Height Off the Floor

• Two Stage Gas Valve

• Discharge Nozzles: Available in 30, 60, and 90 Degree Sizes

• Totally Enclosed Propeller Motors

• Thermostats

• Multiple Line and Low Voltage T-Stats

• Sterling T834N T-Stat with Fan On Only Switch

• Gas Conversion Kits

Competitive ProductsReznor UDAP/S

• Sizes 150 - 400 MBH • TCORE2 Heat Exchanger

– Titanium Stabilized Aluminized

• 409 & 316 SS Available HX Option

• 83% Thermal Efficiency• Single Burner Combustion System• Vibration/Noise isolated Fan &

Venter Motors Standard• Multi-Try Direct Spark Ignition

w/ 100% Lockout

Competitive ProductsModine PDP

• PDP a Clamshell Design• Power Vented, Direct Spark

Ignition• 150 MBH – 400 MBH• Available in 409 S/S• Gas Controls

– Single-Stage– Two-Stage– Mechanical Modulation

QV Propeller Units

• Sizes from 100 to 400 MBH• Propeller Units • Power Vented, Spark Ignition

Standard• Approved for Commercial &

Industrial Applications• 80% Thermal Efficiency• 20 Gauge Jacket Panels with Baked

Enamel Finish• Individual Removable Self Locking

Louver Blades

QV Separated Combustion Propeller Units

• Sizes from 100 to 400 MBH• Propeller Units • Power Vented, Spark Ignition

Standard• Approved for Commercial &

Industrial Applications• 80% Thermal Efficiency• 20 Gauge Jacket Panels with Baked

Enamel Finish• Individual Removable Self Locking

Louver Blades

Optional Accessories

• OSHA Type Fan Guard (Finger Guard) when Installations are Under 8 Feet in Height Off the Floor

• Two Stage Gas Controls• 409SS Heat Exchanger• 312SS Heat Exchanger• 409SS Burners• 409SS Flue Collector• Vertical Louvers• Summer/Winter Switch

• Discharge Nozzles: Available in 30, 60, and 90 Degree Sizes

• Totally Enclosed Propeller Motors

• Thermostats• Multiple Line and Low

Voltage T-Stats • Sterling T834N T-Stat with

Fan On Only Switch• Gas Conversion Kits• 24V Relay

QV Blower Units

• Sizes from 100 to 400 MBH• Power Vented, Spark Ignition • Approved for Commercial &

Industrial Applications• 80% Thermal Efficiency• 20 Gauge Jacket Panels with Baked

Enamel Finish• Individual Removable Self Locking

Louver Blades• Belt Guard

QV Separated Combustion Blower Units

• Sizes from 100 to 400 MBH• Power Vented, Spark Ignition • Approved for Commercial &

Industrial Applications• 80% Thermal Efficiency• 20 Gauge Jacket Panels with Baked

Enamel Finish• Individual Removable Self Locking

Louver Blades• Belt Guard

Optional Accessories

• Gas Controls– Two Stage– Electronic Modulation

• Room Sensing• Duct Sensing• Duct w/Room Override• DDC Control

• 409SS Heat Exchanger• 312SS Heat Exchanger• 409SS Burners• 409SS Flue Collector

• Duct Flange• Vertical Louvers Discharge • Nozzles• Motors

– Totally Enclosed– Premium Efficiency ODP– Premium Efficiency TE

• Thermostats• Gas Conversion Kits• 24V Relay

QV Duct Furnaces

• Sizes from 100 to 400 MBH• Power Vented, Spark Ignition • Approved for Commercial &

Industrial Applications• 80% Thermal Efficiency• 20 Gauge Jacket Panels with Baked

Enamel Finish• QVED: Bottom Access• QVES: Side Access

QV Separated Combustion Duct Furnace

• Sizes from 100 to 400 MBH• Power Vented, Spark Ignition • Approved for Commercial &

Industrial Applications• 80% Thermal Efficiency• 20 Gauge Jacket Panels with Baked

Enamel Finish• Bottom Access

Optional Accessories

• Gas Controls– Two Stage– Electronic Modulation

• Room Sensing• Duct Sensing• Duct w/Room Override• DDC Control

• 409SS Heat Exchanger• 312SS Heat Exchanger• 409SS Burners• 409SS Flue Collector

• 409SS Drip Pan• Horizontal Louvers• Vertical Louvers• Nozzles• Thermostats• Gas Conversion Kits• Air Flow Prove Switch• Fan Time Delay• 24V Relay

Cab Blowers

Hydronic Unit Heaters

• Hot Water or Steam

Specialty Heaters

• Low Intensity Infrared• High Intensity Infrared• Oil Fired