Weishaupt oil burners WL30 and WL40 Standard version and LN 1/2002 CA
Nov 01, 2014
The new world of combustion technology
2
The new
world of
combustion
technology
Weishaupt has opened a new chapterin digital burner management. The new rating capacity of thelegendary W series burners (WL30 /WL40: from 205 to 1,950 MBTU/h)uses the latest microprocessortechnology for setting, control andmonitoring of all burner functions. Theresult is a new series of burners, whichoffers not only improved comfort andprecision, but also value for money.Furthermore, the new burners are easyto commission, service and are quieterin their operation than other burnerswith a comparable rating.
Burner flange
Ignition unit
Indicating bolt
Setting screwfor diffuser
Solenoid valvenozzle assembly
Combustion manager with connection plugs
Burner motor
Oil pump with solenoid valve
Cover
Capacitor for motor
The latest developments in burner technology:More precision with intelligent electronics
4
Compact design Looking beneath the cover of the typesWL30 and WL40 reveals Weishaupt’susual logical layout of components.
The horizontally fitted fan design hasalready proven itself. The most importantnew components are the newcombustion manager, which replaces theburner control previously used and thenew stepping motor, which regulates theair damper setting in steps of only a tenthof a degree, making it more accuratethan ever before.
A new chapter in the history ofsuccessThis new construction principle of theWL30 and WL40 will be used for allsmaller types of compact burners in theWeishaupt W range. The result of thisdevelopment will be a range of burnersfrom 55 to 1,950 MBTU/h with identicaltechnology and maximum use of commoncomponents.
Burner WL30 and WL40 version LN(LowNOx) An outstanding detail of the burnersWL30 and WL40 version LN is a newLowNOx, mixing head, which ensuresextremely low NOx emissions.
Standard versionVersion LN (LowNOx)
Stepping motors
5
Nozzle assembly
Burner display
Locking bolt
Flame sensorfor flame monitoring
Air damper
Fan
Air intake housing
Air damper indicator
Air damper stepping motor
Hinged flange
Flange gasket
Ignitionelectrodes
Nozzles
Diffuser
Flame tube
Digital burner management:More comfort – less time
6
The Computer as a friendAt the heart of the new burnertechnology lies the Weishauptcombustion manager. It’s efficientmicroprocessor controls and monitors allburner functions. The burner display withits simple operating panel displays allfunction sequences for burnercommissioning. All calculated values canbe displayed and, once the cover isremoved, all set values for burneroperation can be programmed with fourkeys.
Unmistakable plug connectionCoded plug connections ensure thecorrect electrical connection of allcomponents.
New stepping motor The air damper stepping motor providesseparate air damper settings for burnerstart and burner operation.
Report and diagnostic display During burner operation the operatingmode (stage 1 or 2) and operations ofthe stepping motor are indicated on thedisplay.
If a burner lockout occurs the display notonly shows the error message, but alsoan error code. This allows immediaterecognition and rectification of the causeof lockout.
Keywords – Building Management SystemThe Weishaupt combustion manager isfitted with a serial bus connection. Toenable communication with othersystems an interface has been provided.A self-dialling modem can be interfaced,which can report the burner lockout andits cause to a designated telephone orfax connection (e.g. the heatingspecialist).Connections to other components (e.g.controller) or to the DDC installation canbe made via the same interface.
The Weishaupt combustion manager
Digital burner management on WL40
P P
Air stepping motor
Ignition unit/Ignition transformer
Burner display
Data BUS
Combustion manager
Flame sensor
Burner motor
Oil pump Safety valve
Solenoid valve 1
Boiler control
Stage 2
Solenoid valve 2
7
The most important features andfunctions of the Weishauptcombustion manager ● Identical construction for oil and
gas firing● Automatic recognition for gas or oil
burner operation● Easy operation via a key on the
display panel● LCD display with the following
displays– Operating mode with ratings
setting– Information mode
- Burner operating time(total, stage 2)
- Number of burner starts- Measured fuel consumption- Unit number- Software version- Date of manufacture
– Service mode- Burner setting values for start,
operation and start of stage 2- Display of last 6 error
messages– Parameter mode
- Air damper setting at burnershutdown
- Post purge time- BUS address
– Error message display● Operation of stepping motor● Multifunctional BUS connection to
– PC for presentation of the operational sequence and setting of function parameters
– Remote monitoring and diagnosis via self-dialling modem
– Interfacing with other components of heating plant (i.e. controller or DDC unit)
Burner display with all operating keys (WL40 oil burner, burner cover removed)
With burner cover in place the information key remains available to the operator
8
A principle for the future:Excellent value for money
One concept – two convincing solutionsA new construction concept was realizedwith this new W30 and W40 series ofWeishaupt burners. Both gas and oilburners are of identical basic design andare fitted with the latest microprocessortechnology. The result is easierinstallation, disposition, operation,setting and service, and spare partssupply.
Saves money, saves time, savesenergySynergy effect during construction andfinishing, the use of economicalelectronic control and regulatortechnology and proven Weishauptcombustion technology ensure asolution, which is convincing not onlyfrom a technical point of view, but alsofrom an economical point of view.
The new WL30 has a ratings range up to1,130 MBTU/h, the WL40 up to 1,950MBTU/h. In the past a Weishaupt burnerof this ratings class would have costconsiderably more. Due to its compactconstruction, the burner’s electricalconsumption has also been reduced.
Only one service engineer is needed forinstallation. Commissioning simplymeans inputting the required values viathe keys on the burner display. Nocomputer or programming knowledge isrequired to carry out this work.
Compact form, classic design. The burner display is a ‘give-away’ of the new technology.
9
Installation, setting and service:Easier, quicker, more exact than ever before
Service position 1: Burner hinged open viahinged flange
Service position 2: Fan wheel, nozzle assembly and diffuser are fully accessible
Easy access to the mixing head
Time is moneyIt has never been so easy to install andcommission a burner of this rating.
One person can carry out mounting tothe boiler. Commissioning simply meansinputting the required values via the keyson the burner display. That’s it.
Optimum accessibilityOptimum accessibility becomesapparent the moment the cover isremoved. All components are laid outclearly, electrical connection isunmistakable. This state of the arttechnology is typical of Weishauptproducts.
These components are also easilyaccessible for servicing. The wholeburner can be hinged open, including the
valve assembly and diffuser from theflame tube. Furthermore, the nozzleassembly and diffuser can be removedtotally by opening the bayonet fitting.
The housing cover with motor block andcombustion manager can be removedand placed into a service position forservicing the fan. Every service engineerbenefits from this “accommodating”construction.
Burner dimensions – WL30 and WL40
Dimensions in inchesl1 l2 l3 l4 l5 l6 l7 b1 b2 b3 h1 h2 d1 d2 d3 d4 R1 R2 α°
WL30 18.9 10.6➀ 1.6 1.2 2.4 23.6 18.1 16.5 �8.9 3.9 18.1 13.5 5.0 M8 6.7 - 7.7 5.1 6.2 19.3 45°
WL40 22.7 9.3 1.6 1.2 2.8 24.2 18.9 17.7 �9.6 4.3 18.9 14.2 5.9 M10 7.3 - 7.9 6.3 7.3 22.4 45°➀ Dimension for WL30Z-C. On WL30Z-C-3LN = 6.2 inches; on WL30Z-C-4LN = 6.6 inches
l4
l3l2
b3
b1
h1
l1
l5
h2
d1
b2
d2
d3d4
α °
l6
l7
R1
R2
10
Burner rating depending on combustion chamber pressure
The ratings depending on pressure in the combustionchamber are limit values, which have been measuredon idealized test flame tubes.
“WC Burner type WL30Z-C vers. standardCombustion head type W30/2Rating MBTU/h* 245 – 1,130
GPH 1.8 – 8.13.0
2.5
2.0
1.5
1.0
0.5
0
-0.5
-1.00 200 400 600 800 1,000 1,200 1,400
“WC Burner type WL40Z-A 1LNCombustion head type W40/1 LNRating MBTU/h* 410 – 1,215
GPH 2.9 – 8.71.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
-0.2
-0.40 200 400 600 800 1,000 1,200 1,400
“WC Burner type WL30Z-C 4LNCombustion head type W30/4 LNRating MBTU/h* 245 – 735
GPH 1.8 – 5.21.2
1.0
0.8
0.6
0.4
0.2
0
-0.2
-0.4100 200 300 400 500 600 700 800
“WC Burner type WL30Z-C 3LNCombustion head type W30/3 LNRating MBTU/h* 205 – 445
GPH 1.4 – 3.21.0
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.60 100 200 300 400 500 600 700
“WC Burner type WL40Z-A, vers. standardCombustion head type W40/1Rating MBTU/h* 495 – 1,950
GPH 3.5 – 13.93.0
2.5
2.0
1.5
1.0
0.5
0
-0.5
-1.0400 600 800 1,000 1,200 1,400 1,600 1,800 2,000
* The burner ratings are based on lower calorific value
Technical data
11
Scope of delivery – standard version ● Burner with sound insulated air
intake housing● Housing cover with burner motor,
oil pump and fan wheel● Burner flange with hinge assembly,
flange gasket and fixing screws● Nozzle assembly with 2 solenoid
valves, 2 nozzles and diffuser (on WL30 nozzle assembly with 1 solenoid valve)
● Air damper stepping motor● Combustion head● Ignition unit W-ZG 01● New microprocessor controlled
combustion manager (display for burner function, with keys to input set values)
● Connection console inside the burner with coded plugs
● Electrical connection 7 pole connection plug, plus 4 pole plug
● Cover, oil hoses
The extent of delivery of version LNincludes the following additions: ● Oil pump with two solenoid valves● Nozzle assembly with solenoid valve
and nozzle (on WL40, vers. LN)● LowNOx combustion head
Special versions WL30 WL40Order No. Order No.
Combustion head extension by 4” (100 mm) 240 002 85 240 002 63Combustion head extension by 8” (200 mm) 240 003 43 –(for burners in standard version, not for LN version)
Combustion head extension by 4” (100 mm) WL30/3LN 240 002 94 _Combustion head extension by 4” (100 mm) WL30/4LN 240 002 95 –
Oil hoses 59” (1500 mm) long in lieu of 47” (1200 mm) 240 002 76 240 002 76
Oil meter VZ04 fitted, standard version 240 002 86 240 002 66with NF impulse line LN version 240 002 87 240 002 67
Air intake flange 240 002 89 240 002 69
Type Version Type of Order No. Rating Oil throughputregulation MBTU/h* GPH
Oil burner WL for oil #2 up to 6mm2/sec at 68° F to ASTM D396
WL30Z-C Standard two stage 241 313 21 245 – 1,130 1.8 – 8.1
WL30Z-C 3LN two stage 241 313 25 205 – 445 1.4 – 3.2
WL30Z-C 4LN two stage 241 313 26 245 – 735 1.8 – 5.2
WL40Z-A Standard two stage 241 403 21 495 – 1,950 3.5 – 13.9
WL40Z-A 1LN two stage 241 403 25 410 – 1,215 2.9 – 8.7
Other equipmentBurner Combustion Motor Stepping Fan Ignition unit Oil pump Oil hoses Weight: Flametype manager motor Burner sensor
WL30Z-C W-FM20 ECK 05/F-2 STE 4.5 180x70 W-ZG 01 AL65 DN8 62 lbs QRB 1AStandard (MPA20.02) 110 V, 60 Hz BO.36/6-01L C 9525 Length 47” (1200mm)version 110V 60Hz 3500 min-1 Run time ➀ Connection G3/8
0.64 HP, 6 Acap. 30 �F
WL30Z-C W-FM20 ECK 05/F-2 STE 4.5 180x70 W-ZG 01 AT2 45 DN8 62 lbs QRB 1BVersion (MPA20.02) 110 V, 60 Hz BO.36/6-01L C 9563 Length 47” (1200mm)3LN and 110V 60Hz 3500 min-1 Run time ➀ Connection G3/84LN 0.64 HP, 6 A
cap. 30 �F
WL40Z-A W-FM20 ECK 06/F-2 STE 4.5 190x80 W-ZG 01 AL65 DN8 82 lbs QRB 1 Standard (MPA20.02) 110 V, 60 Hz BO.36/6-01L C 9525 Length 47” (1200mm)version 110V 60Hz 3500 min-1 Run time ➀ Connection G3/8
0.86 HP, 7.5 Acap. 40 �F
WL40Z-A W-FM20 ECK 06/F-2 STE 4.5 190x80 W-ZG 01 AT2 55 DN8 82 lbs QRB 1Version (MPA20.02) 110 V, 60 Hz BO.36/6-01L C 9571 Length 47” (1200mm)1LN 110V 60Hz 3500min-1 Run time ➀ Connection G3/8
0.86 HP, 7.5 Acap. 40 �F
➀ in operation: with full setting movement - max. 40 secs. / with reduced setting movement - min. 25 secs. / with pre-purge approx. 1-2 secs.
We are always available.
The Weishaupt service organisationsupporting the trade
Speedy supply of spares is ensured by automated parts store
The new control and diagnostictechnology of Weishaupt burners makeslife easy, even service work. Thanks toelectronic equipment, lockouts can bedetected and rectified faster than ever -even by remote diagnostic via telephoneand computer.
However, in one area we remain “oldfashioned”. The Weishaupt principle‘Service always and everywhere’ remainssteadfast. Weishaupt customer service isavailable throughout the year and aroundthe clock, whenever you require help, beit for spares supplies, technical advice orservice on site.
We are always available
Weishaupt Corporation6280 Danville RoadMississauga, ON L5T 2H7, CanadaTel: (905) 564 0946Fax: (905) 564 0949Email: [email protected]
Print No. 83015816, February 2003Printed in Germany, All rights reserved