<Summary> “DENKA STYROL” is the General Purpose Polystyrene Resin which balances high strength and Excellent forming. Especially the series of MW-1 is the ULTRA Strong Polystyrene who breaks the traditional common sense “Hard but Fragile” of PS resin. With the excellent mold release in injection field and excellent processes in extrusion field, DENKA STYROL is used for wide range of products in over 30 countries. <Characteristics> MW-1-301 / MW-1-321 ~Ultra High Molecular Weight Type GP-PS~ MW-1 is suitable for Injection Mold process with its enough strength as shown below. It performs well for the application that needs high impact and can be considered as Replacement material of SAN. HRM-2S-311 ~Heat Resistance / Suitable for Sheet application~ ‣Good Heat Resistance ‣FDA Approval Grade ‣Enough strength with high Molecular weight and Stable Extrusion MF-21-301 ~Multi Purpose~ ‣Standard Grade in DENKA STYROL line up ‣It is used for variety kinds of products CD Case OPS Lunch Box Pet Cage Egg Case Crisper Box Tray <Refrigerator> Cutlery PSP XPS “ “Falling Weight Strength Falling Weight Strength” ” Weight 50g Weight 50g 2mm 2mm 3 Plate Plate 50cm 50cm 40cm 40cm 30cm 30cm 20cm 20cm 10cm 10cm 5mmR 5mmR Standard Standard GPPS GPPS MW MW-1 DENKA STYROL GP-PS(MW-1-301/MW-1-321/HRM-2S-311/MF-21-301) GLOBAL CONNECTIONS PLC.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
<Summary>
“DENKA STYROL” is the General Purpose Polystyrene Resin which balances high
strength and Excellent forming. Especially the series of MW-1 is the ULTRA Strong
Polystyrene who breaks the traditional common sense “Hard but Fragile” of PS resin.
With the excellent mold release in injection field and excellent processes in extrusion
field, DENKA STYROL is used for wide range of products in over 30 countries.
<Characteristics>
MW-1-301 / MW-1-321 ~Ultra High Molecular Weight Type GP-PS~
MW-1 is suitable for Injection Mold process with its enough strength as shown below. It
performs well for the application that needs high impact and can be considered as
Replacement material of SAN.
HRM-2S-311 ~Heat Resistance / Suitable for Sheet application~
‣Good Heat Resistance
‣FDA Approval Grade
‣Enough strength with high Molecular weight and Stable Extrusion