€¦ · Web viewManufactures independently provide a written confirmation that they will provide their services and support even they change the local agent in Sri Lanka. This

PP. Ref. No: AHEAD/SUSL/FOM/2019/02PRICE SCHEDULE FOR EQUIPMENT – LABORATORY EQUIPMENT 1 2 3 4 5 6 7 8 9 10

Goods and related Services offered within Sri Lanka (in Sri Lankan Rupees)A

Item No.

Description of goods or related services Qty and unit

Unit price(inclusive of

duties, sales and other taxes)

without VAT

Price per line item

(Col. 3x4)

Inland transportation, insurance and other related

services to deliver the goods to their final destination if

not included under column 4

Total Price before VAT

(Col 5+6)

Discounted Total price

(if any)before

VAT

VAT Total Price after VAT(Col. 7 or

8+9)

1 UHPLC System 12 Minus 80 Freezer 13 Eliza Multyplate Reader 14 Microscope: inverted , Fluoresent, phase Contrast 15 Carbon dioxide incubator-01 46 Biosafety cabinets class 2 4

7 Gel documentation system 2

8 Refregirated Centrifuge 29 Multi head teaching microscopes 2

10 Urodynamic systems 111 Auto mated PCR Analyzer 212 Karyotyping workstation 113 Freeze dryer 114 GC-MS 115 Cryo Freezer 1

PP. Ref. No: AHEAD/SUSL/FOM /2019/02

………………………… ……………………….. …………………………

1

TECHNICAL SPECIFICATIONS

Item # and Name Component Description Minimum Specifications

Bidder’sResponse(Yes/No)

If “No” comment/s on the offer

1 UHPLC System The system shall comprise the following major components: 1. Degasser2.Quaternary Gradient Pump3. Auto Sampler3. Column compartment

5. Diode array detector6. Fluorescence detector7. Refractive index detector8. Accessories

Detailed specifications for UHPLC system Brand NameModelCountry of OriginCountry of ManufactureWarrantyDocumentation

I. Manufacture product catalogs/ brochure with requested information should be supplied. Documentary evidence of requested specifications should be provided by marking on manufacturer’s literature.

2

Name of the Company Signature of the Bidder Date

II. Manufacture authorization letter to represent the given brand and ISO certificate

III. User reference list should be attached. The supplier should have at least 3 years’ experience in maintaining such equipment preferably in government sector.

IV. Warranty certificateThe equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during the period of validity. V. After the sale services: Suppler should have an established after sales service unit with proven records and necessary tools. Supplier should have at least 3-year experience for supply and maintaining similar type of instruments.

- Degasser Degasser Should have built-in vacuum degassing unit Number of channels 4 channels of eluent lines should be available Quaternary Gradient Pump Flow Range Flow Range should be 0.1–10 mL/min or better Pressure range Pressure range should be up to 600 bar or better Flow Accuracy Flow Accuracy ±0.1% or better Flow precision Flow precision < 0.05% RSD or better Pump seal wash Rear/pump seal wash facility should be available Delay volume Delay volume 600-700µl

Application capability

The system should have the capability to perform conventional HPLC applications as well as high throughput UHPLC applications. This should be confirmed by manufacture literature.

Composition precision Composition precision should be < 0.15% SD or better

3

Composition accuracy Composition accuracy should be ±0.5% or better

Display Built in large display to indicate flow rate and pressure should be available in the module.

Auto Sampler Injection volume Injection volume range of 0.1 - 50 µL or better Injection Linearity Injection Linearity <1% RSD or better Carry over Carry over <0.02% Pressure range Compatible up to pressure range of 600 bar

Sample capacity 120 position capacity for 2.0 mL vials

Display Built in large display to indicate injection volume and sample position should be available in the module.

Column compartment Temperature range Temperature range up to 50 °C or better Temperature precision Temperature precision should be ±0.1 °C or better Column capacity Column capacity up to 30 cm length HPLC columns

Display Built in large display to indicate column temperature should be available in the module.

Diode Array Detector Detection type 1024 element photodiode array system should be available

Light Source Deuterium lamp and tungsten lamp with temperature control lamps should be available.

Data Rate 100Hz or better Wavelength Range 190 to 800 nm or better Linear absorbance range Up to 1.5 AU or better Wavelength Accuracy ±1.0 nm or better

4

Flow cell Analytical flow cell ,10 mm path length, volume of 10-15 µl

Detector performance diagnostic softwareSoftware should have capability to perform detector diagnostic testing including, Holmium Oxide Test, Intensity Test, Dark Current Test etc.

Spectral scanningShould have full spectral scanning feature and Spectral identification, spectral library creation and 3-D spectrum analysis.

Display should have a built in large screen display on the module to indicate the wavelength measured

Fluorescence Detector Light Source Xenon Flash Lamp Maximum Data Rate 100 Hz or better Excitation Wavelength Range 200 – 625 or better Emission Wavelength Range 265 – 625 or better Bandwidth 20 nm for Excitation & Emission or better Performance specifications Raman S/N: > 550 or better Wavelength Repeatability: ±0.2 nm or better Wavelength Accuracy: ±2 nm or better Flow Cell 8μL volume and of 20 bar of pressure or better

Spectrum Scanning 2D and 3D scanning options and spectral analysis tools should be available.

Flow Cell Temerature Control Temperature controlling from ambient +15 °C to 45 °C or better

Display Should have a built in large screen display on the module to show the exitation & emmision wavelenghts

Refractive Index Detector Refractive Index Range 1.00-1.75 RIU or better Optics temperature control 30°C-55 °C or better Flow Cell valume of 8μL with a maximum pressure of 0.5 bar or better Maximum Flow Rate 10 mL/min or better

5

Linearity Range 600 µRIU or better Noise Less than 2.5 x 10-9 RIU Drift 200 x 10-9 RIU/h Measuring Method Deflection method Accessories required

Brand new computer(500 GB Hard Disk, 8 GB RAM and core i5 processor) and laser printer with 21” LCD monitor should be supplied

3 KVa UPS or manufacture recommended power protection system for Complete instrument with minimum 15 minutes backup

C18 column (5micron 250 mmX4.6mm column) - 2 no C18 column (5micron 150 mmX4.6mm column) - 2 no 0.45 µm disposable Nylon syringe filter membranes-500 nos 2ml autosampler vials for sample injection - 500 nos 4 Nos of 2.5 L of HPLC grade methanol 4 Nos of 2.5 L of HPLC grade Acetonitrile

Mobile phase filter unit Mobile phase filter unit with filter funnel capacity 300ml, flask capacity 1000ml.

Vacuum pump with Moisture trap vacuum regulator should be provided

Maximum flow rate of 18 L/min or better should be available Maximum vacuum of -670mmHg or better should be available 450 rpm motor speed or better should be available Should provide nylon filters required for filtration unit. Warranty 1 years warranty for the system should be provided

6

2 Minus 80 Freezer Brand Name Model Country of Origin Country of Manufacture Warranty Documentation

II. Manufacture product catalogs/ brochure with requested information should be supplied. Documentary evidence of requested specifications should be provided by marking on manufacturer’s literature.



IV. Warranty certificate

The equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during the period of validity.

V. After the sale services: Suppler should have an established after sales service unit with proven records and necessary tools. Supplier should have at least 3-year experience for supply and maintaining similar type of instruments.

Specifications It should be a model with CFC free refrigerants

7

Capacity should be higher than 600LTemperature range shall be controllable from -50 ° C to -86° C

There shall be latch and handle for ergonomic handling and one hand operation

There should be down-feed evaporator and surge tank for extra capacity

There will be two outer doors and Four Inner doors

Triple -sealing silicone door gasket will assure tight closing and no air leakage

Two tubeaxial fans should be available to provide maximum cooling for the compressor housing

Heavy-duty dual wheel swivel locking casters should be available for easy handling

There should be an automatic voltage compensator to responds to high and low voltages

The outer surface should be powder coated for higher durability

Front to back airflow with Removable, cleanable air filter will be available

A vacuum relief port will allow easy re-entry after door openings

A microprocessor controller system will be available with one degree increments, with digital display.

Eye Level Information center with digital display will assure at-a-Glance Monitoring

Battery back-up for the alarm monitoring system will be available, that will ensure sample protection

Both visual and audible alarms must give alerts for over and under temperature, power fail, door ajar, and low battery conditions

The freezer should comply with UL Listed, cUL, CE standards

Price of the CO2 back up system with CO2 cylinder should be shown separately

8

Documentation

Manufacture product catalogs with requested informations should be supplied

Manufacture authorization for the bidder to represent the given brand

User reference list should be attached

Bidder should have good aftersales facility with trained technicians and parts available locally to carry out any service/ repair immediately

3 Eliza Multyplate Reader

Brand NameModelCountry of OriginCountry of ManufactureWarrantyDocumentation

III. Manufacture product catalogs/ brochure with requested information should be supplied. Documentary evidence of requested specifications should be provided by marking on manufacturer’s literature.



9




Specifications

It should have Freely selectable wavelengths from 200 to 1000nm for the demands of various assays

It should supports endpoint, kinetic and spectral scanning assays

There shall be a visual internal software on a large color screen for quick and easy measurements

The whole spectrum of a sample should be able to scan in 1 nm increments to allow identification of the optimal measurement wave length for new assays

A narro spectral band width of < 3 nm will be available for ensuring exelent spectral resolution

Plate Type should be 96 well and 384 well plates

Light Source should be Xenon Flash lamp that will ensure long lasting life time

Linearity at 450 nm will be not higher than 3% for 96-well plate in the range of 0 - 2.5 Abs

Accuracy at 450 nm will be not higher than 1.5% + 0.004 Abs in the range of 0 - 2.0 Abs and 2.5% in the range of 2.0 - 2.5 Abs

Read-out Range should be up to 3 Abs or better

Measurement speed shall be at least 7 s with 96-well plate11 s with 384-well plate

10

Incubator Temperature range should be at least Ambient +2° to 40°C toenable temperature sensitive applications such as enzyme kinetics orcellular assays

It should have a Linear shaking mode to ensure that the samples in the microplate stay homogeneous

Spectral Scanning Speed shall be not higher than 12s from 200 to 1000nm with 1nm steps

System should work stand alone with built in soft ware o and PC with external soft ware provided as standard accessory

Should have support internet cloud system to remort data access.

Power : 230V, 50 Hz

Power Consumption should not be higher than 115W

Documentation





Inverted, Fluorescence, Phase Contrast, Polarization, Trinocular Microscope

11

4 microscope-Advanced Inverted, Fluorescence, Phase Contrast, Polarization, Trinocular Microscope with High Imaging facilities

Minimum Specification Make Model Brand Name Country of Origin Model Country of Manufacture Country of Origin

Country of Manufacture

Warranty

Documentation I. Manufacture product catalogs/ brochure with requested information should be supplied. Documentary evidence of requested specifications should be provided by marking on manufacturer’s literature. II. Manufacture authorization letter to represent the given brand and ISO certificate III. User reference list should be attached. The supplier should have at least 3 years’ experience in maintaining such equipment preferably in government sector. IV. Warranty certificateThe equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during the period of validity. V. After the sale services: Suppler should have an established after sales service unit with proven records and necessary tools. Supplier should have at least 3-year experience

12

for supply and maintaining similar type of instruments.Features & Specifications

Pair HWF 10x/22 mm eyepieces

Pair of eyecups

Trinocular head, 45° inclined tubes. Tubes can be positioned in upper or lower positions Interpupillary distance 54-75 mm. Diopter adjustment on left eyepiece Reversed quintuple revolving nosepiece on ball-bearings

Plan 10x and plan phase PLPH 20x, S40x IOS infinity corrected objectives (advanced high quality viewing fluarex type objectives)

All optics are anti-fungus treated and anti-reflection coated for maximum light throughput

250 x 230 mm stage with 120 x 78 mm mechanical stage Should include following holders for testing, Glass insert with 30 mm hole Metallic insert with 25 mm hole Metallic insert for 35 mm diameter Petri dish holder 76x26 mm slide holder 54mm Petri dish holder Multiwell holder with 65 mm Petri dish holder

N.A. 0.30 condenser with iris diaphragm and filter holder, working distance 72 mm

Coaxial coarse and fine adjustments. Precision 2 μm, 0.2 mm per rotation.

Total travel approximately 25 mm Suppy with slider with phase contrast annuli and green filter Telescope for fluorescence alignment

13

Standard polarization filter and 360° rotating analyzer attachment

Transmitted 100 W mercury vapor fluorescence illumination 5 W NeoLED™ illumination

Brightfield/phase contrast illumination with internal power supply 240 V (CE)

Stonge transparent UV protection shield

Should include all the rail for 4 filter blocks and 3 filter blocks with standard filter sets:

Blue: EX465-495 range Green: EX520-600 range UV1: EX361-381 range Should include the power cord and transportation box Imaging facilities

20 MP USB 3.0 digital cooled camera with 1 inch CMOS sensor for Cell culture

Sensor High Resolution CCD 1 inch with 5440 x 3648 pixels, 20 Mpix,

Peltier cooled Suitable for fluorescence microscopy Pixel size 2.4 μm x 2.4 μm and with RGB filter C-mount thread. Delivered without objective Up to 5 frames per second (5440 x 3648 pixels) Up to 10 frames per second (4096 x 2160 pixels) Up to 15 frames per second (2736 x 1824 pixels) Up to 30 frames per second (1824 x 1216 pixels) Exposure Automatic or manual from 0.1 to 3600 seconds White balance Automatic/manual Sensitivity 462 mV @ 1/30 sec Interface USB-3, 5 Gbit/second

14

Two-stage active-cooling System -45 °C below camera body temperature

Dimensions 100 mm long x 100 mm diameter Operation -10 up to 50° C, 30-80 % humidity

Supplied with a carrying case together with USB cable, 1x C-mount objective, 30.0 and 30.5 mm to 23.2 mm conversion adapters

1mm/100 (10 μm/division) calibration slide and 100-240 Vac to 12Vdc/3A power adapter for Peltier cooling

Software Windows 7, Windows 8, Windows 8.1, Windows 10 (32 and 64 bit configurations)

Brand Name Model 5 Carbon dioxide incubator-01 Country of Origin Country of Manufacture Warranty Documentation





The equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning

15

on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during the period of validity.


Specifications

It should have fully stainless steel contruction including interior and exterior

Capacity should be not less than 110 L

Temperature range should be 0 to+70

Temperature resolution should be 0.1C in full range temperature

It should have two stainless steel wire shelves with minimum seven shelf positions

Temp. controller should be microprocessor with external LCD graphic display and illuminated touch buttons

Protection: over temperature with class 2.0 according to DIN 12880

Air convection should be forced air circulation

Fan speed regulation of 0 to 100% and automatic fan shut-down after completing the program

There should be a six-segment temperature-time profile There should be at least 3 user programs memory Adjustable start delay feature should be from 1 min to 90 h It should have adjustable ramps

There should be a facility to overview set and current parameters while operating

16

There should be a possibility of temperature calibration by the user

power failure control system should be available (program continued after restoring power)

Availability of audible and visual temperature alarm and temperature sensor fail alarm

Timer facility: digital timer and real time clock with 1 min to 90 days

It should have an auto-diagnostic function for malfunctions

Internal memory should be available to store up to 2000 data records

Interfaces: Both RS232 and USB ports for data transfer

Manufacturer’s test certificate should be supplied with the system

voltage: 230V/50Hz Warranty: One year or above

Availability of audible and visual temperature alarm and temperature sensor fail alarm

Timer facility: digital timer and real time clock with 1 min to 90 days

It should have a auto-diagnostic function for malfunctions

Internal memory should be available to store up to 2000 data records

Interfaces: Both RS232 and USB ports for data transfer

Manufacturer’s test certificate should be supplied with the system

voltage : 230V/50Hz Warranty : One year or above Brand Name

17

6 Biosafety cabinets with laminary airflow (with HEPA filters)- class2 Model

Country of Origin Country of Manufacture Warranty Documentation







Specifications

It should be a class II A2 type EN certified biosafety cabinet suitable for working with microbiological research with sample, environment and user protection

It should have a motorized front window with anti UV two-layer laminated toughened glass with at least 5mm thickness. Motorized window will eliminate the contamination of work

18

area with microorganisms by hand operation of the window

Large LCD display should display all required parameters such as inflow and down flow velocities, exhaust and down flow filter pressure, filter life, UV lamp life, system work time etc.…

Air speed should be adjustable automatically with filter block to maintain constant air speed

Interior should be made up of single piece stainless steel plates to ensure corrosion resistant

UV lamp, front window, blower, fluorescent lamp should be able to lock to prevent unauthorized access

External Size and internal size (W*D*H) should be in between 1300-1400 mmx750-800 mmx2250-2300mm and 1200-1250×650-670×650-670 mm respectively

Work Surface Height will be at least 740mm while maximum opening is 540 mm

Safety working height should be approximately 200 mm

It should have two HEPA filters with 99.999% efficiency at 0.3um and filter life indicator

Filter Guard Type will be Aluminum alloy frame for higher filter safety

Noise level should be not higher than 58 dB according to EN 12469 standard

Illumination should be around 1000 Lux for comfortable visibility

Inflow air volume, Down flow air volume and Exhaust air volume should be 450 m3/h, 850 m3/h and 470 m3/h respectively

It should come with two Waterproof Sockets; one water taps and one Gas tap

Power Supply should be AC230V, 50Hz with power consumption less than 610W

19

Alarm facility should be available for abnormal airflow velocity; Filter change; Front Window over height etc.…

There should be a speed adjustable motor with high efficiency and low power consumption

The external body construction material should be cold-rolled steel with anti-bacteria power coating while Working area is 304 stainless steel

UV Lamp power should be at least 30W with 254 nm for most efficient decontamination.

It should be a complete system with base stand, UV lamps, Florescent lamp, SS water and gas tap, Drain valve, water proof sockets

A Formalin fumigation sterilizer and remote-control system should be supplied with the system

Brand Name

Model 7 Gel documentation system Country of Origin Country of Manufacture Warranty Documentation




20




Specifications

The darkroom with integrated filter wheel should be made entirely of stainless steel and aluminium

A large number of dyes such as Ethidium Bromide, Sybr-Safe, Sybr Green, Gel-Red, Gel-Green, Sybr-gold, GFP,Pro-Q Emerald 300, Sypro-Ruby, FITC, DAPI should be able to use in different applications

It should have a small footprint for space saving There shall be a large door opening foe easy access

Zoom lense should be motorized with F590 emission filter

There shall be a 10 positions filter wheel It should consists of USB interface for data transfer to a PC

There shall be additional free software for image editing andimage analysis: molecular weight calculation, band quantification & distance calculation

It should produce a Reproducible and comparable quantification data

One click to get the image should be available

21

Auto-exposure and auto-focus facility should be available

There shall be automatic light illumination according to application

There shall be Protocol driven image acquisition

It should consists of a 312nm UV lamp with Filter size 21x26cm

CAMERA & OPTICS It should be a Scientific grade camera Resolution should be at least 5 megapixels With Passive cooling 16-bit – 65 536 grey levels With USB connection Motorized zoom lens with feedback Field of view: 26x21cm

Suitable software package and PC should be supplied for data analysis

Documentation





8 Refregirated Centrifuge

22

Minimum Specification Refrigerated MicroCentrifuge Make Model Country of Origin Country of Manufacture

Brand Name

Model

Country of Origin


Warranty

Documentation I. Manufacture product catalogs/ brochure with requested information should be supplied. Documentary evidence of requested specifications should be provided by marking on manufacturer’s literature. II. Manufacture authorization letter to represent the given brand and ISO certificate III. User reference list should be attached. The supplier should have at least 3 years’ experience in maintaining such equipment preferably in government sector. IV. Warranty certificateThe equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during the period of validity.


Features The unit features powerful brushless motor and an

23

intuitive control panel.

This refrigerated microcentrifuge model that incorporates a powerful cooling system that maintains temperatures as low as -10°C and can reach 4°C in less than eight minutes.

Speed is easily set and displayed in either rpm or rcf.

Operation of the unit can be timed, continuous, or momentary using the "Quick" button.

Vibration free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped for safety.

Deceleration at the end of a run is very quick, but will not disrupt samples.

These microcentrifuges are supplied with a uniquely designed 24 x 1.5 / 2.0 mL rotor that allows easy access to the tops of the sample tubes.

Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure.

Adapters are available for smaller tubes as well as PCR strips.

The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving.

Specifications Speed range : 500 to 13,500 rpm Maximum RCF: 17,135 x g Maximum capacity: 24 x 1.5/2.0 mL

Timer : 0.5 to 99 minutes or continuous, "Quick” button for momentary operation

Temperature range: -10° to 40°C

Dimensions (W x D x H) : 10.9 x 17.75 x 9.75 in/27.7 x 45 x 24.75 cm

24

Weight : 44 lb/20 kg Electrical : 230V~, 50 Hz or 120V~, 60 Hz

9 Multi head teaching microscopes Trinocular Multihead Teaching Microscope Minimum Specification Make Model Brand Name Country of Origin Model Country of Manufacture Country of Origin


Warranty

Documentation I. Manufacture product catalogs/ brochure with requested information should be supplied. Documentary evidence of requested specifications should be provided by marking on manufacturer’s literature. II. Manufacture authorization letter to represent the given brand and ISO certificate III. User reference list should be attached. The supplier should have at least 3 years’ experience in maintaining such equipment preferably in government sector. IV. Warranty certificateThe equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during

25

the period of validity. V. After the sale services: Suppler should have an established after sales service unit with proven records and necessary tools. Supplier should have at least 3-year experience for supply and maintaining similar type of instruments.Features & Specifications

Should include 6 extra binocular heads

EWF 10x/20 mm eyepieces

Siedentopf 30° inclined tubes. Interpupillary distance 50-75 mm with diopter adjustment on left tube

Multihead attachment with joystick to move a green or red pointer across the entire field of view

Revolving quintuple reversed nosepiece on ball bearings

Plan PLi 4x/0.10, 10x/0.25, S40x/0.65, S100x/1.25 oil immersion IOS objectives

All optics are anti-fungus treated and anti-reflection coated for maximum light throughput

216 mm x 150 mm rackless stage equipped with integrated 79 x 52 mm mechanical stage

Height adjustable Abbe condenser N.A. 1.25 with iris diaphragm and filter holder

Coaxial coarse and fine adjustments with 200 graduations Precision 1 μm, 0.2 mm per rotation. Total travel approximately 24 mm Rack-stop for protection of slides and objectives. Friction adjustment

Diascopic intensity adjustable 3 W NeoLED™ Köhler illumination with Internal 240 V power supply (CE)

The illumination of the microscope automatically switches off whenthe microscopist steps away from his position, saving energy

Should include Cable Storage System.

Supplied with power cord, 500 mA 250 V spare fuse, 5 ml immersion oil and dust cover in styrofoam case

26

10 urodynamic systems Model Country of Origin Country of Manufacture Warranty Documentation





The equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning on full “part & labour” basis.

Such a warranty shall also include servicing and preventing maintenance during the period of validity.

V. After the sale services: Suppler should have an established after sales service unit with proven records and necessary tools.

Supplier should have at least 3-year experience for

27

supply and maintaining similar type of instruments. Specifications

Capable of performing H20 and CO2 cystometry, EMG, LPP, UPP, Pressure Flow Studies, and Uroflowmetry

Large 10.5" screen Pre-test mode Pole, wall, or cart mounts Wide printout Multiple transducer inputs

system with all components on solid easily transportable trolley

videourodynamics user friendly software interfac Power input :220-240V/ 50 Hz AC Model Country of Origin

11 Auto mated PCR Analyzer Country of Manufacture Warranty Documentation





The equipment shall be warranted for a period of not less than

28

24 calendar months from the date of successful commissioning on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during the period of validity.


Specifications

Real time PCR system shall be with latest technology with latest data analysis capabilities with communication and networking such as remote monitoring of RTPCR run and results via colud etc.

System should support the chemistries of identifying …………………………………………….

System shaould be fully open in terms of creating methods and use of all sorts of standard consumables, reagents and chemistry kits. Manufacturer written confirmation on this should be atatched to tender document.

An automated system for both real-time PCR and post-PCR (end-point) analysis.

System shall use inbuilt Peltier block based system.

System should have peltier system with six separate peltier blocks for PCR optimization and run more experiments.

Temperature Accuracy of the machine should be +/- 0.25°C or better

The temperature uniformity 0.4°C or better.

Efficient heating & cooling block with block ramp rate should be 6°C /sec or better

29

The instrument should have capability to analyze 96 samples simultaneously in a 96-well plates with out any additional adaptors

System Shall accept , 96 x 0.2 ml well plates,0.2ml single tubes, and 0.2ml x 8 tubes strips with out any additional adaptors

The system should be open and shall accpet any universal accessories, kits or reagents.

The excitation by bright white LED source for longer lamp life, better accuracy and precision.

Wave length excition ranage shall be 450 - 675 nm or better

System should have optical detection system with 6 or more decoupled filters for high sensitive detection.

The system should be provide easy door design for loading and unloading 96-well plates and individual PCR tubes.

System should support reaction volume of 10-100ul or better

Dynamic Range of the machine should be 9-10 orders of magnitude.

System should have capability of multiplexing 6 targets or more in a single run.

21 CFR Part 11 complieance shall be available with system for data security.

The instrument should compatible with FAM™/SYBR® Green, VIC®/JOE™/HEX/TET, ABY/ NED™/TAMRA™/Cy3®, ROX™/TEXAS RED, Cy5®,

System shall have web browser based and online configuration. It shall provide access to data from compatible devise from anywhere in the world with PIN protected account.

RTPCR system should have Cloud based data storage,sharing and analysis capabilities.

The instrument should be supplied with specialized application specific software that collects and analyzes fluorescent data for

30

the applications of Absolute Quantitation, Relative Quantitation (gene expression), Relative Standard Curve, Allelic Discrimination/SNP (single nucleotide polymorphism) Detection with automated genotype calling, Plus/Minus Assays/Pathogen Detection using internal positive controls.

Dedicated licensed full version software for primer and probe design must be included in the supply.

System should be standardized for Taqman and SYBR Green Chemistry

The instrument software must have a specialized multicomponenting algorithm designed to provide precise deconvolution of multiple dye signals in each well to help ensure minimal crosstalk when using multiple fluorophores for multiplex assays.

RTPCR should be supplied with Laptop computer, required software for RTPCR and 3kVA online UPS

System Performance Varifications

Supplier should carry out system performance varfication at the time of instrument handing over.

Training

Comprehensive training on sample preparation methods development for disease diagnosis of Leptospirosis. Need to provide training for 3 MLTS and One medical Pathologist at manufacturer application laboratary.

Letter of Authorization

Local Agent should submit Letter of Authorization from the Manufacturer.

ISO Standards

The instrument is UL approved and manufactured according to

31

ISO 9001 standards. Spare Parts Availability

Local Agent should submit letter from manufacturer confirming spare parts availability for 5 years.

Warranty

Local Agent shoul provide warranty for the instrument from manufacturer for 2 years.

Serivice Capability

The instrument should install at the user site by a Certified Service Engineer without additional cost to the customer. The service engineer should performs all the instrument calibrations and verifies that the instrument is performing according to specifications by running a specified verification assay.

Local representative should have work shop facillities with all necessary testing equipments

Local agent of manufacturuer should have an engineer based in closer proximity ( with in the district or region) in order to attend for immediate support. Please provide the contact details and address.

Man Power

Local representative should have sufficent staff to provide efficient after sales service. Please provide the information of all staff including EPF Number and names of technical personnels and educational qualifications.

Financial

Local representative should provide the proven track record of financiall capabilities by providing audited accounts report of atleast last 5 years.

Installations

32

Please provide details and no of Instruments supplied and installed by the local agent who offer RT PCR for this tender from same manufacturer during last 3 years.

Brand Name

Model 12 Karyotyping Workstation Country of Origin Country of Manufacture Warranty Documentation






V. After the sale services: Suppler should have an established after sales service unit with proven records and necessary tools. Supplier should have at least 3-year experience

33

for supply and maintaining similar type of instruments. Specifications

The microscope should be widefield binocular, with a tilting trinocular head with a field diameter of at least 25mm or preferably more.

Two widefield Eyepieces of 10x with a field number of 25 mm or preferably more.

The interpupillary distance adjustment should be 50 – 75 mm or better.

The revolving nosepiece should be sextuple to accommodate at least 6 objectives

Ceramic-coated wire-driven mechanical square stage with no protrusions

Stage size should be at least 155(D) x 190(W) mm. The travelling area must be at least

50mm(Y) x 75mm(X) with tension adjustment.

Focusing by coarse and fine coaxial handle with tension adjustments. The full stroke range must be at least 25mm with a minimum fine adjustment of at least 1um.

There should be an upper limit stopper to prevent objective damaging the specimen/slide.

Condenser should be Swing-out type with height adjustment, with NA 0.9 for magnification range 1.25x – 100x

Built-in LED illumination for transmitted light with light intensity manager function and an eco-switch for power saving.

Plan Achromat Objectives 10x,20x,40x, and Semi Apochromat objectives 60x and 100x(oil.)

All optics should be anti-fungal treated.

34

With C-mount for Camera attachment.

CAMERA ACQUISITION SYSTEM: Acquisition of only required region.

Capturing by one mouse click and the whole process is performed under the same software platform

Automatic camera and image capture control with manual override function.

Display optimization for maximum display contrast.

Camera: Digital Monochrome CCD camera with 4.1 Megapixels, 26fps

DATABASE: -Single database for all applications

Modern paperless laboratory design management software should be included.

Centralized server with better network accessibility

Centralized server with better network accessibility and data integrity.

Capable to integrate with LIS (Laboratory Information System) of the institute/organization.

Data access from any workstation in the network should be possible.

Ability to associate with any external documents (pdf,word,xml etc).

Any replaced or new metaphases should be updated in the gallery and in the database.

Capable to export acquired image as clipboard image. Capable to import external images. Image processing history to be saved with date and time of

35

each modification Ability to migrate cases from various versions. Ability to generate highly configurable customized reports. Easy and unlimited data archival and retrieval. KARYOTYPING SOFTWARE: ability to handle G-,R-,Q- banding, polyploid cells and markers

ability to perform automatic contour to widen and shrink the chromosome in one click.

Merge as many regions or chromosomes as required.

Easy to Move chromosomes. Drag and drop chromosomes to desired locations

Simple chromosome Rotation using the mouse scroll wheel. Localize Marker Chromosomes in Karyotype view. Additional tools for counting chromosome. Annotate chromosomes as well as ideograms. Ability to prepare the customized ideograms.

Support of ISCN ideogram with 300, 400, 550, 700 and 850 band resolutions.

Multi-function tool which eliminates the need for switching between other functional tools.

A single tool must be used to select, de-select, separate touching and overlapping chromosomes, cut, join, delete or add parts of chromosomes, rotate or move the chromosomes etc in metaphase as well as in karyotype workspace.

Ability to work in any workspace

Ability to add missing telomeric regions directly in karyotype view.

36

Accurately estimate the band resolution of metaphase.

Fast definition of classifiers allow the user to train the software to perform automated Karyotyping on band resolutions and preparations etc

Capable to compare chromosomes within the case and within different cases

COMPUTER:

Compatible latest branded computer with minimum Intel® Core i5 series, 8GB RAM, HDD 500GB Windows 7 professional, OS 7 professional, OS 64 bit

24’’ High Resolution Monitor, Full HD monitor with minimum resolution of 1920 x 1200.

2KVA UPS with at least half an hour battery back-up.

13 Freeze dryer Floor Type Freeze Dryer Minimum Specification

37

Make Model Brand Name Country of Origin Model Country of Manufacture Country of Origin


Warranty

Documentation I. Manufacture product catalogs/ brochure with requested information should be supplied. Documentary evidence of requested specifications should be provided by marking on manufacturer’s literature. II. Manufacture authorization letter to represent the given brand and ISO certificate III. User reference list should be attached. The supplier should have at least 3 years’ experience in maintaining such equipment preferably in government sector. IV. Warranty certificateThe equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during the period of validity. V. After the sale services: Suppler should have an established after sales service unit with proven records and necessary tools. Supplier should have at least 3-year experience for supply and maintaining similar type of instruments.Features Compact, stainless steel unit with casters for easy movement, Floor type freeze dryer provides unmatched process accuracy and reliability in performance. It optimizes your space requirements and reduces energyconsumption.Condenser, operation panel, shelves and trays are made of stainless steel

Drying chamber is equipped with organic glass for safety and visibility

38

Low noise compressor with long shelf life and high efficiency Features vacuum freeze drying technology Drying curves are displayed on LCD screen Condenser has pre-freezing function CFC free environment friendly refrigeration with low maintenance Electricity heating defrosting System is available

software is available: Check and keep freeze drying data on computer, control freeze dryer through PC

Specifications Type : Manifold Capacity : 1.2 L Condenser Temperature : -80°C Water Holding Capacity : 3-4 /24h Freeze Drying Surface Area : 0.12 m² Pre Freeze Shelf Dimension : ɸ 200 mm Vacuum Degree : < 10 Pa Pump Flow Rate : 2 L/sec Overall Dimension (mm) : 660x460x(710+430) Shelves : 4 Weight : 115 kg Power : 1071W Power Supply : 220V, 50Hz Vial ɸ 22 : 260 Vial ɸ 16 : 480 Vial ɸ 12 : 920 Model

39

Country of Origin 14 GC-MS Country of Manufacture Warranty Documentation







Specifications

1. GC mainframe.2 Automatic sampler3. Split/splitless Inlet4 .Mass spectrometry detector5. Data management and acquisition System6. Accessories7. Supportive instruments8. Others

40

Up to 450 °C or better maximum opetating temperature should be available

The system shall comprise the following major components:

Minimum seven indipendently controlled heated zones or better should be available

GC mainframe The GC should have the capacity to accomodate two injectors and two detectors

Oven Temperature range Temperature Resolution should be 0.1°C or better

Heated Zones System cooling should take less than 4 min to cool from 450°C to 50°C or better

Number of Injectors and detectors Oven should support temperature programming with 25/26 ramps/plateaus or better

Temperature Resolution Retention Time Repeatability of <0.001 min or better should be available.

Oven cooling Area Repeatability of < 0.5% RSD or better should be available.

Oven Temperature programming steps Maximum achievable oven heating Rate should be 125 °C/min or better

Retention Time RepeatabilityColumn oven should accept both capillary columns and packed columns. Should have the facility to install two standard columns

Area Repeatability Maximum achievable heating Rate

41

Column capacity One Split/split less injector should be available for the system.

Injector maximum temperature should be 400°C or better

Split/split less injector Programmable pressure and flow control should available including Constant pressure and constant flow modes.

Split/Splitless Injection UnitInjector should have a pressure range of 0 - 140 psi or better. Pressure Resolution for the injector sholud be 0.001 psi or better resolution for the complete pressure range

Injector maximum temperatureThe instrument inlet system should be a user changable unit. The end user should be able to remove and install the injector unit without the use of any special tools.

Injector pneumatic control split ratio of minimum 10000:1 or better is required to avoid column overload

Pressure setting Range

User changable inlet system

Split ratio setting range Sample vial capacity should be 2ml standard GC vials and small volume GC vials.

Autosampler should have capacity for 8 satandard 2ml vials or better.

Automatic Sampler Syringe size should be 5-10µl. Sample Vial capacity Minimum injection should be 0.01ul or better

Sample Capacity Pre and post injection needle washing and mode for high viscosity samples should be available.

Syringe size Autosampler should have programable needle injection depths to inject from different hights of the sample vial.

Minimum injection Should be able to upgrade with sample vial capacity up to 150 vials

Injection Modes Injection depth Upgradable facility Electron Ionization with Full scan and SIM and simultaneous

42

Full scan/SIM should be available.

Mass resolution should be unit mass resolution throughout the mass range

Mass spectrometry detector The mass analyzer should be able to scan a mass range of 1.5 - 1100 amu or better

Operation Modes Scan rate should be in the range of 20,000 amu/sec or better

Mass resolution Dual filaments ion source with independently programmable source temperature up to 350°C or better should be available.

Mass range Variable electron energy up to 150 eV should be available. Scan rate ###########################################

Ion Source Mass axis stability should be ±0.1 amu over 48 hours or better

Electron Energy Off-axis detector for neutrals noise removal should be available.

Mass analyzer Dynamic range up to 108 or better should be available.

Mass axis stability Transfer line temperature can be independantly programmable and should be up to 400°C or better

Detectorl pg of octafluoronaphthalene for m/z 272 ion should produce Signal to Noise ratio of 2000:1 or better sensitivity for Inert EI source

Detector dynamic range Both automatic and manual tuning should be possible under full software control.

Transfer line temperaturePump system should have dual stage turbomoleculer pump and mechanical pump. Capacity of turbomolecular pump should be minimum of 66 L/s or better

Sensitivity EI mode

System tuning

Pump System Branded computer with Latest Licensed Windows operation system and minimum 21" flat screen monitor

Branded Laser Printer Software and computer Manufacturer recommended control software for both GC,

Autosamplers and mass detector should be provided with the

43

system. The software should support instrument control, data acquisition, data processing and data analysis.

Computer Printer

Control software All component should operate on 230 V±10% 50 Hz without any step-down transformers.

Operating Voltage Minimum 2 year Supply voltage Warranty

GC maintenance kits including ferrules, liners, septa, column nut and column cutter.

Autosampler injection syringe 5 nos

Required accessories to be supplied with GC for the operation GC inlet septa 50 Nos

GC maintenance kits GC split inlet liner with quartz whool 10 Nos

Accessories required for GC operation

Inlet Liner sealing ring 10 Nos

Gas filter unit for removal of moisture, Oxygen and Hydrocarbon in carrier gas.2Nos

2ml GC amber color autosampler vials 1000 Nos.

Syringe filters -25mm, 0.45µ PTFE Syringe Filter for sample filtration. 1000 nos.

Four numbers of MS-35 capillary column with 30 m length, 0.25 mm internal diameter, and 0.25 µm film

Two numbers of MS-5 capillary column with 30 m length, 0.25 mm internal diameter, and 0.25 µm film

Rotary evaporator for solvent handling.

GC Columns

Instrument work bench should be supplied with the instrument with enough space for complete instrument operation

44

Rotary Evaporator The supplier should provide required gas cylinders and regulators -Helium (99.999%). Supplier should provide required gas purification units.

Online 10 kVA UPS for GCMS system with 15 minute backup.

Inrtrument Work Bench

Gas Cyliders, regulators and Purification panels

UPS Printed literature for the instrument manufacturer should be attached with the offer

Should provide a letter of authority from the manufacture, certifying that the local agent In Sri Lanka. Offers not carrying authentic letter of authority will be rejected

Essential documentation for qualification criteria for evaluation

Instrument should be a fully workable system. If any other accessory, consumable is needed for completed operation supplier must quote for required accessories, consumables and chemicals

Printed LiteratureSupplier should have an established after sales service unit with proven records and necessary tools. Supplier should have at least 5 year experience for supply .

Letter of Authority One set of Operation Manual in English language.

Complete workable system Complete training for operation, maintenance and calibration of instrument should be provided by the Local Agent at installation site

After sales Service Facility Instrument supplier should agree to supply GC system supportive instruments, required GC standards, solvents and training as a complete package.

Manuals The supplier must agree to provide necessary spare parts at least for 10 years after installing the instrument.

Training Five years experience of the bidder in the field of supplying of analytical equipments of similar

45

Supply Scope The bidder shall furnish documentary evidence that it meets following qualification criteria

Supply of Spare Parts Working Capital of past 3 years (Shall furnish past 3 years audited balance sheets)

Experience of local supplier Bidder should have positive working capital for at least two of the past 3 years.

Financial Capability Bidder should have profits after tax equivalent to the 50% of the quoted value of the instrument during past 3 years.

15 Cryo Freezer Minimum Specification .-152°C Cryogenic Freezer Chest Type Make Model Country of Origin Country of Manufacture

Brand NameModelCountry of OriginCountry of ManufactureWarrantyDocumentation I. Manufacture product catalogs/ brochure with requested information should be supplied. Documentary evidence of requested specifications should be provided by marking on manufacturer’s literature.

46

II. Manufacture authorization letter to represent the given brand and ISO certificate III. User reference list should be attached. The supplier should have at least 3 years’ experience in maintaining such equipment preferably in government sector. IV. Warranty certificate The equipment shall be warranted for a period of not less than 24 calendar months from the date of successful commissioning on full “part & labour” basis. Such a warranty shall also include servicing and preventing maintenance during the period of validity.


Features

Design that is optimized to protect your sensitive samples, our cryogenic freezers provide ultimate protection and are absolutely reliable.

With high quality construction and microprocessor controls, it helps you to achieve stable long term preservation of cells and tissues effortlessly.

Microprocessor-based temperature controller Digital temperature display Stainless steel interior and painted steel board exterior Danfoss compressor and EBM fan electromotor Door with key lock and rotatable door handle

Two-times foaming technology with double seal design

Insulation thickness: 155 mm

Keyboard lock and password protected configuration page

Mixed Refrigerant: CFC Free R134a, R404a, R23, R410A, and N2

Unique refrigeration circulation and unipolar compressor oil-lubricatedtechnology

72 hours battery backup for printer and controller display

47

Temperature printer which record 7 days data 4 casters for easy handling

Safety functions: audible and visual alarm for high or low temperature, power failure, low battery, door open, filter blocking, system failure

Specifications Capacity : 128L Temperature Range : -110°C to -152°C Defrosting : Manual Internal Dimension : 370x600x550 mm Overall Dimension : 880x1590x1040 mm Weight (Net/Gross) : 215/250 kg Input Power : 2200 W Power Supply : 220V, 50Hz

48

49

Essential documentation qualification criteria for evaluation

Printed literature for the instrument manufacturer should be attached with the offer.( All specifications requested should be highlighted and tagged for evaluation reference),In the event of all technical features not mentioned in the broacher instrument manufacture should confirm availability of features on their letter head

Should provide a letter of authority from the manufacture, certifying that the local agent In Sri Lanka. Offers not carrying authentic letter of authority will be rejected.

Instrument should be a fully workable system. If any other accessory, consumable is needed for completed operation supplier must quote for required accessories, consumables and chemicals

Supplier should have an established after sales service unit with proven records and necessary tools. supplier should have at least 5 year experience for supply and maintaining similar type of instruments. Should attached list of instruments supplied last 10 years. In the event of Instrument is malfunctioning local agent should attend to the job within 48 hours.

Manufactures independently provide a written confirmation that they will provide their services and support even they change the local agent in Sri Lanka. This letter should be signed by the most senior and empowered manager responsible for Sri Lankan Market. Closest support center of the manufacturer and Contact person details need to be attached to the tender.

Two year warranty from the date of acceptance after satisfactory installation and commissioning of the instrument.

One set of Operation Manual and Method Manual, in the English language.

Complete training for operation, maintenance and calibration of instrument should be provided by the Local Agent/Manufacturer at installation site. Trainer should have sufficient knowledge on Technology as well as sample preparation.

The supplier must agree to provide necessary spare parts at least for 10 years after installing the instrument.

In order to get the maximum usage of the Instrument Manufacturer should agree to offer its technical advice free of charge.

Five years experience of the bidder in the field of supplying of analytical equipment of similar types

Bidder shall furnish the past supply records including, Name of the Institution, Type of Instrument, Contact details of the user.

50

€¦ · Web viewManufactures independently provide a written confirmation that they will provide their services and support even they change the local agent in Sri Lanka. This

Documents