实实实实实实实实实实实实 实实 实实实实 实实实实 实实实实 、、、 SCI / EI/ 实实实 实 实实实实 1 A smart switchable bioinspired copper foam responding to different pH droplets for reversible oil- water separation Journal of Materials Chemistry A 2017, 5: 2603-261 SCI Liu Y, Zhang KT, Son Y, Zhang W. Spindler LM, Han ZW, Ren LQ 2 Energy-efficient oil– water separation of biomimetic copper membrane with multiscale hierarchical dendritic structures Small 2017, 13: 1701121 SCI Han ZW, Li B, Mu ZZ, Niu SC, Zhang JQ, Ren LQ 3 Bio-inspired omnidirectional self- stable reflectors with multiscale hierarchical structures ACS Applied Materials and Interfaces 2017,9:292 85-29294 SCI Han ZW, Mu ZZ, Li B, Fang XM, Wang Z, Zhang JQ, Niu SC, Ren LQ 4 Temperature- Responsive Hierarchical Polymer Brushes Switching from Bactericidal to Cell Repellenc ACS Appl. Mater. Interfaces 2017, 9 (46): 40930– 40939 SCI Wang X, Yan S, Song L, Shi H, Yang H, Luan S, Yin JH, Khan AF, Zhao J 5 Superfast and high- sensitivity printable strain sensors with bioinspired micron- scale cracks Nanoscale 2017, 9: 1166-1173 SCI Song HL, Zhang JQ, Chen DB, Wang KJ, Niu SC, Han ZW, Ren LQ 6 Influence of ultrasonic treatment on formation of amylose nanoparticles prepared by nanoprecipitation Carbohydrate Polymers 2017,157:1 413-1418 SCI Chang YJ, Yan XX, Wang Q, Ren LL,Tong J,Zhou J 7 A self-standing Electrochimic 2017, 246, SCI She P, Yin SY,
45
Embed
bionic.jlu.edu.cnbionic.jlu.edu.cn/__local/2/00/D4/0B208251B06C139B46CAF0... · Web viewDry-sliding friction and wear mechanism of TiC-TiB2 particulates locally reinforced Mn-steel
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
实验室近五年发表论文列表序号 论文名称 刊物名称 年、卷、期、
页或专利号SCI/EI/国内期刊
论文作者
1A smart switchable bioinspired copper foam responding to different pH droplets for reversible oil-water separation
Journal of Materials Chemistry A
2017, 5: 2603-261 SCI
Liu Y, Zhang KT, Son Y, Zhang W. Spindler LM, Han ZW, Ren LQ
2Energy-efficient oil–water separation of biomimetic copper membrane with multiscale hierarchical dendritic structures
Small 2017, 13: 1701121 SCI
Han ZW, Li B, Mu ZZ, Niu SC, Zhang JQ, Ren LQ
3Bio-inspired omnidirectional self-stable reflectors with multiscale hierarchical structures
ACS Applied Materials and Interfaces
2017,9:29285-29294 SCI
Han ZW, Mu ZZ, Li B, Fang XM, Wang Z, Zhang JQ, Niu SC, Ren LQ
4Temperature-Responsive Hierarchical Polymer Brushes Switching from Bactericidal to Cell Repellenc
ACS Appl. Mater. Interfaces
2017, 9 (46): 40930–40939 SCI
Wang X, Yan S, Song L, Shi H, Yang H, Luan S, Yin JH, Khan AF, Zhao J
5 Superfast and high-sensitivity printable strain sensors with bioinspired micron-scale cracks
Nanoscale 2017, 9: 1166-1173 SCI
Song HL, Zhang JQ, Chen DB, Wang KJ, Niu SC, Han ZW, Ren LQ
6Influence of ultrasonic treatment on formation of amylose nanoparticles prepared by nanoprecipitation
Carbohydrate Polymers
2017,157:1413-1418 SCI
Chang YJ, Yan XX, Wang Q, Ren LL,Tong J,Zhou J
7A self-standing macroporous Au/ZnO/reduced graphene oxide foam for recyclable photocatalysis and photocurrent generation
Electrochimica Acta 2017, 246, 35 SCI
She P, Yin SY, He QR, Zhang XC, Xu KL, Shang YX, Men XJ, Zeng S, Sun H, Liu ZN
8Bioinspired fabrication of one dimensional graaphene fiber with collection of droplets application
Scientific Reports 2017,7:12056 SCI
Song YY, Liu Y, Jiang HB, Li SY, Kaya C, Stegmaier T, Han ZW, Ren LQ
9One-pot synthesis of Au@TiO2 yolk-shell nanoparticles with enhanced photocatalytic activity under visible light
Journal of Colloid and Interface Science
2017, 505:884-891 SCI
Sun H, He QR, She P, Zeng S, Xu KL, Li JY, Liang S, Liu ZN
10Investigating the size effect of Au nanospheres on the photocatalytic activity of Au-modified ZnO nanorods
Journal of Colloid and Interface Science
2017, 499, 76-82 SCI
She P, Xu KL, Zeng S, He QR, Sun H, Liu ZN
11One-step fabrication of biomimetic superhydrophobic surface by electrodeposition on magnesium alloy and its corrosion inhibition
Journal of Colloid and Interface Science
2017, 491: 313-320 SCI
Liu Y, Xue JZ, Luo D, Wang HY, Gong X, Han ZW, Ren LQ
12Spiky TiO2/Au nanorod plasmonic photocatalysts with enhanced visible-light photocatalytic activity
Dalton Transactions 2017, 46(12) SCISun H, Zeng S, He QR, She P, Xu KL, Liu ZN
13Effect of drying conditions on crystallinity of amylose nanoparticles prepared by nanoprecipitation
International Journal of Biological Macromolecules
2017,97: 481-488 SCI
Yan XX, Chang YJ, Wang Q, Fu YJ, Zhou J
14 Design of a bionic aviation material based on the microstructure of beetle’s elytra
International Journal of Heat and Mass Transfer
2017, 114: 62-72 SCI Sun JY, Liu C, Du
HY, Tong J
15Drag reduction performance and mechanism of a thermally conductive elastic wall in internal flow
Applied Thermal Engineering
2017,123: 152-1157 SCI Tian LM, Wang YJ,
Li ZY, Shang YG
16 A 3D simulation model of corn stubble cuttting using finite element method
Soil and Tillage Research
2017, 166: 43-51 SCI Li M, Xu S,Guo
L,Tong J
17 A pressure measurement method based on profiling elastic press roller
Soil and Tillage Research
2017,165: 218-229 SCI Jia HL, Luo XF,
Wang WJ
18Standing corn residue effects on soil frost depth, snow depth and soil heat flux in Northeast China
Soil and Tillage Research
2017, 165: 88-94 SCI Wang G, Jia HL,
Tang L
19Anti-icing property of bio-inspired micro-structure superhydrophobic surface and heat transfer model
Applied Surface Science
2017, 400: 498-505 SCI
Liu Y, Li XL, Jin JF, Liu JA, Yan YY, Han ZW, Ren LQ
20Effect of Nanofibrillated Cellulose Content on the Temperature and Near Infrared Responses of Polyvinyl Butyral Nanofibers-Containing Bilayer Hydrogel System
Polymers 2017,9(7): 270 SCI Zhao Q, Ning LP, Liang YH
21Design and Fabrication of Bilayer Hydrogel System with Self-Healing and Detachment Properties Achieved by Near-Infrared Irradiation
Polymers 2017, 9(6): 237 SCI Zhao Q, Hou WH,
Liang YH
22Controllable growth of Au@TiO2 yolk–shell nanoparticles and their geometry parameter effects on photocatalytic activity
New Journal of Chemistry 2017, 41(15) SCI
Sun H, He Q, Zeng S, She P, Zhang X, Li JY, Liu ZN
23 Elastic-plastic bending properties of an AZ31B magnesium alloy based on
Journal of Alloys and Compounds
2017, 708:594-599
SCI Ma ZC, Zhao HW, Ren LQ
persistent tensile preloads
24Corrosion inhibition of hydrophobic coatings fabricated by micro-arc oxidation on an extruded Mg-5Sn-1Zn alloy substrate
Journal of Alloys and Compounds 2017,731 SCI
Luo D, Liu Y, Yin XM, Han ZW, Ren LQ
25 MnO2 aerogels for highly efficient oxidative degradation of RhodamineB
RSC Advances 2017,7(48),30283-30288 SCI
Sun H, Shang YX, Xu KL, Tang YN, Li JY, Liu ZN
26Bionic anti-adhesive electrode coupled with maize leaf microstructures and TiO2 coating
RSC Advances 2017,7(72): 45287-45293 SCI
Han ZW, Fu J, Fang XM, Niu SC, Zhang JQ, Ren LQ
27Physicochemical properties of chitosan films incorporated with honeysuckle flowers extract for active food packaging
Journal of Food Process Engineering
2017,40(1), 1-8 SCI Wang LY, Wang Q,
Tong J, Zhou J
28The thermal conductivity-dependant drag reduction mechanism of water droplets controlled by graphene/silicone rubber composites
Experimental Thermal and Fluid Science
2017, 85:363-369 SCI
Tian LM, Wang Y, Li Z, Mei HR, Shang YG
29Effect of different speed rolling on the room and elevated temperature tensile properties of rolled AZ31 Mg alloy sheets
Materials Characterization
2017, 124: 223-228 SCI
Luo D, Wang HY, Zhao LG, Liu GJ, Liu Y, Jiang JC
30Long-term durability of superhydrophobic properties of butterfly wing scales after continuous contact with water
Colloids and Surfaces A: Physicochemical and Engineering Aspects
2017, 518: 139-144 SCI
Han ZW, Fu J, Wang Z, Wang YJ, Li B, Mu ZZ, Zhang JQ, Niu SC
31Process Parameter Optimization of Extrusion-Based 3D Metal Printing Utilizing PW–LDPE–SA Binder System
Materials 2017, 10(3), 305 SCI
Ren LQ, Zhou XL, Song ZY, Zhao C, Liu QP, Xue JZ, Li XJ
32 Wettability and contact time on a biomimetic superhydrophobic surface
Materials 2017, 10(3): 254 SCI Liang YH, Peng J,
LI XJ
33Investigating the nanomechanical properties and reversible color change properties of the beetle Dynastes tityus
Journal of Materials Science
2017,52(11): 6150-6160 SCI Sun JY, Wu W, Liu
C, Tong J
34Controlled preparation and visible light photocatalytic activities of corn cob-like Au–ZnO nanorods
Journal of Materials Science
2017, 52(6):1-12 SCI
She P, Xu KL, He QR, Zeng S, Sun H, Liu ZN
35Numerical study on reduction of aerodynamic noise around an airfoil with biomimetic structures
Journal of Sound and Vibration
2017, 394:46-58 SCI
Wang J, Zhang CC, Wu ZY, Wharton J, Ren LQ
36 Biomimetic auper-hydrophobic structured graphene on stainless
Surface & coatings Technology
2017, (316):152-160
SCI Song YY, Liu Y, Jiang HB, Zhang
steel surface by laser processing and transfer technology
YL, Han ZW, Ren LQ
37 Mosquito eyes inspired surfaces with robust antireflectivity and superhydrophobicity
Surface & coatings Technology
2017, (316):85-92 SCI
Song YY, Liu Y, Jiang HB, Zhao J, Han ZW, Ren LQ
38The effect of the micro-structures on the scorpion surface for improving the anti-erosion performance
Surface and Coatings Technology
2017, 313: 143-150 SCI
Han ZW, Zhu B, Yang MK, Niu SC, Song HL, Zhang JQ
39 A simulation of the flight characteristics of the deployable hindwings of beetle
Journal of Bionic Engineering
2017,14(2): 296-306 SCI
Sun JY, Du RJ, Liu XF, Bechkoum K, Tong J, Chen DH
40 Design of a Bionic Blade for Vegetable Chopper
Journal of Bionic Engineering
2017, 14: 163-171 SCI Tong J, Xu S, Chen
DH
41 Fine structure of scorpion pectines for odor capture
Journal of Bionic Engineering
2017, 14: 589-599 SCI
Han ZW, Chen DB, Zhang K, Song HL, Wang KJ, Niu SC, Zhang JQ, Ren LQ
42 Anti-adhesive property of maize leaf surface related with temperature and humidity
Journal of Bionic Engineering
2017, 13: 540-548 SCI
Han ZW, Fu J, Fang YQ, Niu SC, Ren LQ
43Fabrication of bioinspired structured superhydrophobic and superoleophilic copper mesh for efficient oil-water separation
Journal of Bionic Engineering
2017(14):497-505 SCI
Song Y, Liu Y, Zhan B, Kaya C, Stegmaier T, Han ZW, Ren LQ
44Simulation analysis of ultrasonic detection for resistance spot welding based on COMSOL Multiphysics
International Journal of Advanced Manufacturing Technology
2017,93: 2089-2096 SCI
Liu J, Xu GC, Ren L, Qian ZH, Ren LQ
45Defect intelligent identification in resistance spot welding ultrasonic detection based on wavelet packet and neural network
International Journal of Advanced Manufacturing Technology
2017, 90:2581-2588 SCI
Liu J, Xu GC, Ren L, Qian ZH, Ren LQ
46Analysis of continuous roll forming for manufacturing 3D surface part with lateral bending deformation
International Journal of Advanced Manufacturing Technology
2017, 93, 2251-2261 SCI Wang M, Liu ZN,
Lu GL, Cai ZY
47Bio-inspired Polyimine Copolymers: Facial Integration with High Content Variability and Extremal Transitions of Mechanical Properties
Journal of Bionic Engineering
2017,14,(1):119-129 SCI
Zhang S, Lv Y, Zheng L, Li J, Liang S
48 Phalangeal joints kinematics during ostrich (Struthio camelus) locomotion
PeerJ 2017, 5: 1-13 SCIZhang R, Ji QL, Luo G, Xue SL, Ma SS, Li JQ, Ren L
49 Plantar pressure distribution of ostrich during locomotion on looses and solid ground
PeerJ 2017, 5:1-23 SCIZhang R, Han DL, Ma SS, Luo G, Ji QL, Xue SL
50 How does paw pad of Canine attenuate ground impacts? A multi-layer cushion system
Biology Open 2017, 6: 1889-1896 SCI
Miao HB, Fu J, Qian ZH, Ren LQ, Ren L
51 The Ingenious Structure of Scorpion Armor Inspires Sand-Resistant Surfaces
Tribology Letters 2017, 65(3): 110 SCI
Zhang JQ, Chen WN, Chen SQ, Zhu B, Niu SC, Han ZW, Wang HY
52Enhanced Photocurrent Generation of Graphene/Au@ZnO Honeycomb Film
Chinese Journal of Chemistry
2017, 35(10): 1627 SCI Sun H, He QR, Yin
SY, Xu KL
53Water-trapping and drag-reduction effects of fish Ctenopharyngodon idellus scales and their simulations
Science China Technological Sciences
2017, 60: 1111-1117 SCI
Wu LY, Jiao ZB, Song YQ, Ren WT, Niu SC, Han ZW
54 Bionic Walking Foot and Mechanical Performance Applied Sciences 2017, 7(6):575 SCI Wang Y, Li JQ, Li
XJ, Huang H, Qiu F
55How to improve the stability and rate performance of lithium-ion batteries with transition metal oxide anodes
Journal of Material Research
2017, 32(1): 16-36 SCI
Wang HY, Leng XM, Han S, Shao Y, Liu Y, Lian JS, Jiang Q
56Mechanical properties and wear resistance of ZrO2 particulate-reinforced composite layer on compacted graphite cast iron processed by selective laser alloying
Journal of Laser Applications
2017, 29(3): 032003 SCI Lin PY, Zhang ZH,
Kong SH
57Wear Behavior of Medium Carbon Steel with Biomimetic Surface Under Starved Lubricated Conditions
Journal of Materials Engineering and Performance
2017,26(7):3420-3430 SCI Zhang ZH, Shao
FX, Liang YH
58 Endurance Study of Bionic Wheels for Mars Rovers
Journal of Terramechanic 2017,74,57-68 SCI Yan YP, Zou M, Yao
JY, Yuan BF
59 Research of bionic design on tools with rostrum of cyrtotrachelus bugueti guer
Microscopy research and technique
2017, 80(5):478-485 SCI Xu S,Li LH,Tong
J,Li M
60 Bionic Design for Reducing Adhesive Resistance of the Ridger Inspired by Boar’s Head
Applied Bionics and Biomechanics
2017,(3):8315972 SCI
Li JQ, Yan YP, Chirende B, Wang ZL, Zou M
61 The Structure and Flexural Properties of Typha Leaves
Applied Bionics and Biomechanics 2017, 1249870 SCI Liu JJ, Zhang ZH,
Yu ZL
62 Bionic Design of Wind Turbine Blade Based on Long-Eared Owl’s Airfoil
Applied Bionics and Biomechanics
2017(2): 8504638 SCI Tian WJ, Zhang Q,
Yang Z
63 Crashworthiness design for bionic bumper structures inspired by cattail and bamboo
Applied Bionics and Biomechanics 2017:1-9 SCI Xu T, Liu N, Yu ZL,
Zou M
64 Analysis and experiment on cutting performances of high-stubble maize stalks
International Journal of Agricultural and Biological Engineering
2017, 10(1): 40-48 SCI Zhao JL, Jia HL,
Huang DY
65 Friction wheel transmission of no-tillage corn planters
International Journal of Agricultural and Biological Engineering
2017, 10(4): 87-97 SCI Jia HL, Zhang Z,
Chen Z
66 Stalk cutting mechanism of no-tillage planter for widenarrow row farming mode
International Journal of Agricultural and Biological Engineering
2017,10(2):26-35 SCI Jia HL, Jiang XM,
Yuan HF
67 Aluminum nitride–filled elastic silicone rubber composites for drag reduction
Advances in Mechanical Engineering
2017, 9(4): 1-9 SCI
Tian LM, Wang YJ, Li ZY, Wang RM, Shang YG
68 Relationship of hydration and nanomechanical characteristics of beetle cuticle
Biomimetic and Nanobiomaterials
2017, 6(3): 161-167 SCI Zhang ZJ, Wu W,
Tong J, Sun JY
69Three-dimensional multiscale simulation on fracture behaviors of cylindrical shells subjected to inner pressure and surface laser irradiation
Simulation-Transactions of the Society for Modeling and Simulation International
2017, 93(4):335-342 SCI Zhang R, Ma SS,
Tang ZQ
70Tribological properties of ultra‐high molecular weight polyethylene (UHMWPE) filled with copper micro‐powder
Materialwissenschaft und Werkstofftechnik
2017, 48(2):139-150 SCI Ma YH, Wang H,
Bhushan B
71 Bacterial Infection Potato Tuber Soft Rot Disease Detection Based on Electronic Nose
Open Life Sciences 2017, 12(1) SCI Chang ZY, Lv JH, Qi HY
72Parameter Optimization and the Effects on Crack Trend in Pulsed Laser Surface Treated Cast Iron
Laser in Engineering
2017,36(4-6):199-213 SCI Zhang ZH, Lin PY,
Kong SH
73 Design of dome greenhouse skeleton based on bionic study on venation distribution
Internation Agricultural Engineering Journal
2017, 26(2): 27-35 SCI Yu HY, Guan SJ,
Zhang YQ, Sui YY
74Macro-microscopic research in reideer (Rangifer tarandus) hoof suitable for efficient locomotion on complex grounds
Journal of Veterinary Research
2017,61(2): 223-229 EI Zhang R, Qiao Y, Ji
QL, Ma SS, Li JQ
75 On the Localization Algorithm of Wireless Sensor Network and Its Application
International Journal of Online Engineering
2017,13(3):40-51 SCI Jia HL, Zheng JX,
Wang G
76Numerical study on reduction of aerodynamic noise around an airfoil with biomimetic structures
Journal of Sound and Vibration
2017,394:46-58 EI
Wang J, Zhang CC, Wu ZY, J Wharton, Ren LQ
77 泥浆泵凹槽形仿生活塞寿命试验及耐磨机理分析 机械工程学报 2017,53(21):9
5-101 EI 孙艺文, 汝绍锋, 丛茜, 张华扬, 周海涛
78 滑动耕作部件作业阻力测试装置设计与试验 农业机械学报 2017, 48(4):
56-64 EI贾洪雷, 罗晓峰, 王文君
79 仿形滑刀式开沟器设计与试验 农业机械学报 2017,
33(4):16-24 EI 贾洪雷, 郑嘉鑫, 袁洪方
80 大豆高速精密播种机凸勺排种器设计与试验 农业机械学报 2017, 48(8):
95-104 EI陈玉龙, 贾洪雷, 王佳旭
81 农业机械触土部件优化研究现状与展望 农业机械学报 2017, 48(7):
1-13 EI 贾洪雷, 王万鹏, 陈志
82 基于生态位适宜度模型和TOPSIS模型的间作模式评价 农业机械学报 2017,48(4) :
291-297EI王琳琳, 于海业, 张蕾
83 初期稻叶瘟病的叶绿素荧光光谱分析 农业机械学报 2017,48(2):20
3-207 EI 周丽娜, 程树朝, 于海业
84 基于相似理论的月球车坡面通过性能试验 农业机械学报 2017,48(4):40
6-412 EI 王颖,黄晗,李建桥85 离散元模拟中沙土参数标定方法研究 农业机械学报 2017, 48(3):
49-56 EI 张锐, 韩佃雷, 吉巧丽, 何远, 李建桥
86 利用相变释能的农产品冷藏设备主动防除冰方法 农业工程学报 2017,33(9):
276-281 EI 丛茜 , 陈廷坤 , 李杨, 孙成彬, 金敬福
87 锥形轮体结构的覆土镇压器设计与试验 农业工程学报 2017,33(12):5
6-65 EI 郭慧, 陈志, 贾洪雷88 驯鹿足底非规则特征形貌数学模型构建及验证 农业工程学报 2017, 33(8):
56-61 EI张锐, 乔钰, 吉巧丽, 李建桥
89 仿生功能表面内流减阻测试系统的研制
吉林大学学报(工学版) 2017,47(4):11
79-1184 EI 田丽梅, 王养俊, 李子源, 商延赓
90 大豆播种机双 V型筑沟器设计与试验
吉林大学学报(工学版) 2017 (1): 323-
331 EI贾洪雷, 郑嘉鑫, 袁洪方
91 着陆器足垫冲击特性模型试验
吉林大学学报(工学版) 2017,47(4):11
94-1200 EI 黄晗, 李建桥, 陈百超
92 基于多种介质的仿生步行足力学特性试验
吉林大学学报(工学版) 2017,47(2) :
546-551EI王颖, 李建桥, 张广权
93 仿生凹坑形钻井泥浆泵活塞磨损寿命试验 石油学报 2017,
38(2):234-240 EI 孙艺文, 汝绍锋, 丛茜
94 基于逆向工程的水黾腹部建模及特征分析 应用力学学报 2017,34(02):2
64-268 EI丛茜, 王骥月, 李明, 张勇, 张兴旺, 田为军
95 大豆播种机双 V型筑沟器设计与试验
吉林大学学报 (工学版)
2017,47(1):323-331 EI 贾洪雷 ,郑嘉鑫 ,袁
洪方96 基于竹结构的薄壁吸能管仿生优化研究 载人航天 2017,23(4
):473-481 EI 宋家锋, 王会霞, 盖宏健, 刘国敏, 邹猛
97 仿生针刺作用下的高年弹性材料减阻性能分析 科技通报 2017,33(11
):44-46 EI 王京春, 陈禹, 李因武
98Active antifogging property of monolayer SiO2 film with bioinspiredmultiscale hierarchical pagoda structures
ACS Nano 2016, 10:8591-8602 SCI
Han ZW, Mu ZZ, Li B,Wang Z, Zhang JQ,Niu SC,Ren LQ
99 Self-Assembly of 2D MnO2 Nanosheets into High-Purity Aerogels with Ultralow Density
Chemical Science 2016, 7, 1926-1932 SCI
Liu ZN,Xu KL,She P,Yin SY,Zhu XD,Sun H
100A High-Transmission, Multiple Antireflective Surface Inspired from Bilayer 3D Ultrafine Hierarchical Structures in Butterfly Wing Scales
Small 2016, 12(6):713-720 SCI
Han ZW, Mu ZZ, Li B, Niu SC,Zhang JQ,Ren LQ
101Biomimetic multifunctional surfaces inspired from animals
Advances in Colloid and Interface Science
2016, 234: 27-50 SCI
Han ZW, Mu ZZ,Yin W,Li W, Niu SC, Zhang JQ, Ren LQ
102Phenylene–Vinylene Macrocycles as Artificial Transmembrane Transporters
47-54 EI 李建桥,张广权,王颖174基于相似理论的星球车牵引通过性模型 航空学报 2016,37(6):19
74-1982 EI 黄晗,李建桥,陈百超175耕作部件耦合仿生表面结构制备方法 农业机械学报 2016,47(S1):1
30-135 EI 贾洪雷,罗晓峰,王文君
176基于地面力学的筛网轮牵引通过性研究 农业机械学报 2016, 47(S1):
334-340EI黄晗 ,李建桥 , 陈百超
177仿生步行足沙地力学特性研究 农业机械学报 2016,47(2):
384-389 EI 王颖,李建桥,张广权178仿生锥形触土部件水平阻力研究 农业机械学报 2016,47(s1):1
24-129 EI 王颖,李建桥,邹猛179火星巡视器鼓形车轮仿生设计与性能分析 农业机械学报 2016,4
7( 8) :311-316
EI 张锐,吉巧丽,杨明明180轮面曲率半径对沙地刚性轮
沉陷性能影响研究 农业机械学报 2016,47(11):341-349 EI 张锐,吉巧丽,张四华
181氨基酸及衍生物生产-生物制造重要组成部分 发酵科技通讯 2016,45(1):
7-11 EI 王健,路鹏,张昕182叶菜硝酸盐污染控制方法特征解析与发展趋势 北方园艺 2016
,40(6):185-188
EI 张蕾,付强,戚飞飞,于海业,王琳琳
183基于形态学图像检测的机械手移栽穴苗识别技术 光学精密工程 2016
,24(3):651-656
EI 王跃勇,于海业,刘媛媛
184Synthesis of Conjugated Porous Co (II) Porphyrinylene-Ethynylene Framework Through Alkyne Metathesis and Its Catalytic Activity Study
Journal of Materials Chemistry A
2015, 3:4954-59 SCI
Lu GL,Yang HS,Zhu YL, Tyler H, Ren J Z,Liu ZN
185Metallated Porphyrin Based Porous Organic Polymers as Efficient Electrocatalysts
Nanoscale 2015, 7:18271-77 SCI
Lu GL,Zhu YL,Xu KL,Jin YH,Ren J Z, Liu ZN, Zhang W
186Evaluation of Wear Resistance of Friction Materials Prepared by Granulation
ACS applied materials & interfaces
2015,7(41):22814–22820 SCI Ma YH, Liu YC,
Carlo M
187Corrosion inhibition of biomimetic super-hydrophobic
Corrosion Science 2015,94:190–196
SCI Liu Y, Li SY, Zhang JJ, Liu JA, Han ZW,
electrodeposition coatings on copper substrate Ren LQ
188Reaction behavior of TiC/Cu composite via thermal explosion reaction (TE) under Ar and air atmosphere
Corrosion Science 2015, 93: 283–292 SCI
Liang YH, Zhao Q, Han ZW, Zhang ZH, Li XJ, Ren LQ
189Investigation of nanomechanical properties and thermal fatigue resistance of gray cast iron processed by laser alloying
Journal of Alloys and Compounds
2015, 626:260-263 SCI Yang X, Zhang ZH,
Wang JT, Ren LQ
190An Ingenious Super Light Trapping Surface Templated from Butterfly Wing Scales
Nanoscale research letters
2015, 10: 1052 SCI Han ZW, Li B, Niu
SC
191One-step method for fabrication of biomimetic superhydrophobicsurface on aluminum alloy
Colloids and Surfaces A: Physicochem. Eng. Aspects
2015,466:125–131 SCI
Liu Y, Liu JD, Li SY, Wang YM, Han ZW, Ren LQ
192Fabrication of the Replica Templated from Butterfly Wing Scales with Complex Light Trapping Structures.
Applied Surface Science
2015, 355: 290-297 SCI Han ZW, Li B, Niu
SC
193Facile fabrication of biomimetic superhydrophobic surface withanti-frosting on stainless steel substrate
Applied Surface Science
2015,355:1238–1244 SCI
Liu Y, Bai Y, Jin JF, Tian LM, Han ZW, Ren LQ
194One-pot synthesis of ultrathin manganese dioxide nanosheets and their efficient oxidative degradation of Rhodamine B
Applied Surface Science
2015, 357:69-73 SCI Sun H, Huang MJ
195A self-standing nanocomposite foam of polyaniline@reduced graphene oxide for flexible super-capacitors
Synthetic Metal 2015, 209:68-73 SCI Liu ZN, Sun H
196Effect of operating conditions on size and morphology of amylose nanoparticles prepared by precipitation
Starch 2015,67: 365-672 SCI
Dong Y, Chang YJ, Wang Q,Tong J,Zhou J
197Thermal fatigue behavior of Mg-9Al-Zn alloy with biomimetic strengthening units processed by laser surface remelting
Optics and Laser Technology 2015, 70: 1-6 SCI
Zhang ZH, Lin PY, Kong SH, Li XJ, Ren LQ
198n-situ fabrication of TiC-TiB2 precipitates in Mn-steel using thermal explosion (TE) casting
Journal of Materials Research
2015,30: 1019-1028 SCI
Liang YH, Zhao Q, Zhang ZH, Han ZW, Li XJ, Ren LQ
199Design and Tests of Biomimetic Blades for Soil-rototilling and Stubble-breaking
Journal of Bionic Engineering
2015,12(3): 495-503 SCI Tong J, Ji W, Jia H
200Compaction Performance of Biomimetic Press Roller to Soi
Journal of Bionic Engineering
2015,12:152–159 SCI Tong J, Zhang QZ,
Guo L
201Dry-sliding friction and wear Tribology 2015, 58:567- SCI Liang YH, Zhao Q,
mechanism of TiC-TiB2 particulates locally reinforced Mn-steel matrix composite from a Cu-Ti-B4C system via a self-propagating high-temperature synthesis (SHS)-casting route
93-198 EI 贾洪雷,王刚,郭明卓231基于压电薄膜的免耕播种机播种深度控制系统 农业机械学报 2015, 46(4):
1-8 EI 黄东岩,朱龙图,贾洪雷
2322BH-3型玉米行间播种机设计与试验 农业机械学报 2015, 46(3):
83-89 EI贾洪雷,姜鑫铭,郭明卓
233基于模糊顺序形态学的植物叶片脉络边缘提取 农业工程学报 2015,31(12):1
93-198 EI 徐艳蕾 ,贾洪雷*,包佳林
234仿形弹性镇压辊减粘防滑结构设计与试验 农业机械学报 2015, 46(6):
20-27 EI 贾洪雷,王文君,庄健235仿形弹性镇压辊设计与试验 农业机械学报 2015, 46(6):
28-34 EI 贾洪雷,王文君,庄健236双凹面摇杆式排种器设计与性能试验 农业机械学报 2015,
46(6):60-65 EI 贾洪雷,赵佳乐,郭明卓
237穴盘幼苗机械手取苗基质完整率影响因素试验与分析 农业工程学报 2015,46(14):
65-71 EI 王跃勇, 于海业238生鲜农产品供应链近场通信智能数据采集终端系统设计与开发
农业工程学报 2015,31(8):200-206 EI 孙旭 ,杨印生 , 刘春
霞,郭鸿鹏239轻载荷条件下的筛网轮沉陷 吉林大学学报 (工
学版),2015,45(1):167-173 EI
李建桥 ,黄晗 ,党兆龙,邹猛,王洋
240松软地面机器系统研究进展 农业机械学报 2015,46(5):306-320 EI 李建桥 ,黄晗 ,王颖 ,
田丽梅,任露泉241轻载荷条件下轻型车辆车轮
牵引通过性模型的建立与验证
农业工程学报 2015,31(12):64-70 EI
黄晗 ,李建桥 , 吴宝广,张广权
242鸵鸟二趾足底曲面固沙限流特性数值模拟
吉林大学学报(工学版) 2015,45(2):50
8- 515 EI 张锐,杨明明,刘海宝243沙地刚性轮构型仿生设计及
牵引性能数值分析 农业工程学报 2015,31(3) :122-128
EI 张锐,罗刚,薛书亮244鸵鸟足底非规则曲面形貌数学模型构建 农业工程学报 2015,31(s1):7
1-78 EI 张锐,杨明明,潘润铎245基于轮地作用参数和 PLSDA方法的月壤力学性能评估 航空学报 2015,36(11):3
751-3758 EI 薛龙,邹猛,李建桥246仿牛角结构薄壁管吸能特性仿真分析
吉林大学学报 (工学版)
2015,45(6):1863-1868 EI 邹猛,于用军,张荣荣
247Preliminary Studies on the basic factors of bionics
Science China Technological Sciences
2014; 57(3):520-530 SCI Ren LQ, Liang YH
248A electro-deposition process for Electrochimica Acta 2014, SCI Liu Y, Yin XM,
fabrication of biomimetic super-hydrophobic surface and its corrosion resistance on magnesium alloy
125:395-403 Zhang JJ, Yu SR, Han ZW, Ren LQ
249Fabrication of Biomimetic Superhydrophobic Surface with Controlled adhesion by Electrodeposition
Chemical Engineering Journal
2014, 248:440-447 SCI
Liu Y, Li SY, Zhang JJ, Wang YM, Han ZW, Ren LQ
250Unparalleled sensitivity of photonic structures in butterfly wings
RSC Adv 2014,4:45214-45219 SCI
Han ZW, Niu SC,Yang M,Mu ZZ,Li B,Zhang JQ,Ye JF,Ren LQ
251Fabrication of superhydrophobic graphene surface with excellent mechanical abrasion and corrosion resistance on aluminum alloy substrate
RSC advances 2014,4:45389-45396 SCI
Liu Y, Zhang JJ, Li SY, Wang YM, Han ZW, Ren LQ
252Tribological and mechanical properties of pine needle fiber reinforced friction composites under dry sliding conditions
RSC Advances 2014,4:36777–36783 SCI Ma YH,Liu
YC,Shang WB
253Hydrophobization of starch nanocrystals through esterification in green media
Industrial Crops and Products
2014,59(59):115-118 SCI Ren LL,Dong
Z,Jiang M
254Sound absorption of a new bionic multi-layer absorber
Composite Structures
2014, 108:400-408 SCI
Wang YH, Zhang CC,Ren LQ,Mohamed Ichchou
255Hygienic food handling intention. An application of the Theory of Planned Behavior in the Chinese cultural context
Food Control 2014,42 :172-180 SCI Bai L,Tang J, Yang
YS, Gong SL
256Anti-wear properties of the molluscan shell Scapharca subcrenata: Influence of surface morphology, structure and organic material on the elementary wear process
Materials Science and Engineering C 2014,42:7-14 SCI
Tian LM, Tian XM, Wang YC, Hu GL, Ren LQ
257The Hydraulic Mechanism of the Unfolding of Hind Wings in Dorcus titanus platymelus (Order: Coleoptera)
International Journal of Molecular Sciences
2014,15(4),6009-6018 SCI Sun JY, Ling MZ,
W W
258Recent advances in the development of functionalized carbon nanotubes: a versatile vector for drug delivery
Journal of Materials Science
2014,49;6845-6854 SCI
Sun H, She P, Lu GL, Xu KL, Zhang W, Liu ZN
259Fabrication of biomimetic super-hydrophobic surface on aluminum alloy
J Mater Sci 2014, 49:1624–1629 SCI
Liu Y, Liu JD, Li SY, Han ZW, Yu SR, Ren LQ
260Effect of B4C particle size on the reaction behavior of self-propagation high-temperature
Journal of Refractory Metals and Hard Materials
2014,6,71–79 SCI Liang YH, Zhao Q,Zhang ZH
synthesis of TiC–TiB2 ceramic_Cu composites from a Cu–Ti–B4C system
261Effects of laser parameters on the geometrical characteristics of peg-shaped bionic coupling unit
Optics & Laser Technology
2014, 64: 184-194 SCI
Zhang BY, Zhang ZH, Liang YH,Yan QQ,Ren LQ
262The characteristics of treated zone processed by pulsed Nd-YAG laser surface remelting on hot work steel
Optics & Laser Technology
2014, 64: 227-234 SCI
Zhang ZH, Lin PY, Cong DL,Kong SH,Zhou H,Ren LQ
263The mechanical properties and microstructures of AZ91D magnesium alloy processed by selective laser cladding with Al powder
Optics & Laser Technology
2014, 60: 61-68 SCI Lin P, Zhang ZH,
Ren LQ
264Friction and wear properties of dumbbell-shaped jute fiber-reinforced friction materials
Journal of Applied Polymer Science 2014,131(17) SCI Ma YH, Liu YC, Ma
SS
265Graphene-supported silver nanoparticles for pH-neutral electrocatalytic oxygen reduction
IEEE Transactions on Nanotechnology
2014,13;790-795 SCI Sun HL, Xu KL, Lu
GL, Lv HB, Liu ZN
266A novel in situ device based on a bionic piezoelectric actuator to study tensile and fatigue properties of bulk materials
Review of Scientific Instruments
2014, 85(6): 065103 SCI Wang S, Zhang ZH,
Ren LQ
267Optimization of corn starch succinylation using response surface methodology
Starch 2014,66(5-6),508-514 SCI Wu XL, Liu P, Ren
LL, Tong J, Zhou J
268Antifogging properties and mechanism of micron structure in Ephemera pictiventris McLachlan compound eyes
Chin. Sci. Bull 2014,59(17):2039-2044 SCI
Han ZW, Guan HY, Cao YY, Niu SC, Ren LQ
269A dynamic finite element model of human cervical spine with in vivo kinematic validation
Chinese Science Bulletin
2014,33,4578-4588 SCI Wang JJ, Qian ZH,
Ren L, Ren LQ
270Prediction and control of trailing edge noise based on bionic airfoil
Science China—Technological Sciences
2014,57(7):1462-1470 SCI Ge CJ, Zhang ZH,
Ren LQ
271Erosion wear experiments and simulation analysis on bionic anti-erosion sample
Science China—Technological Sciences
2014,57(3):646-650 SCI Zhang YH, Huang
H, Ren LQ
272Thermal Cycling Effect on the Wear Resistance of Bionic Laser Processed Gray Iron
Journal of Bionic Engineering
2014,11(2): 288-295 SCI Zhou H, Zhang P,
Zhang ZH
273Biomechanics of musculoskeletal system and its biomimetic implications
Journal of Bionic Engineering
2014, 11:159-175 SCI Ren L, Qian ZH,
Ren LQ
274Quasi-static and dynamic nanoindentation of some selected biomaterials-final
Journal of Bionic Engineering
2014,11(1): 144-150 SCI Sun JY, Ling MZ,
Wang YM
275Effects and Mechanisms of The Scientific 2014:1-12 SCI Tian LM, Tian XM,
Surface Topography on the Antiwear Properties of Molluscan Shells (Scapharca subcrenata) Using the Fluid-Solid Interaction Method
World Journal Hu GL, Wang YC, Ren LQ
276Effects of wool fibers on tribological behavior of friction materials
Journal of Thermoplastic Composite Materials
2014,27(7):867-880 SCI Ma YH, Liu YC,
Gao ZH
277Biomimetic structure design of dragonfly wing venation using topology optimization method
Journal of Mechanics in Medicine and Biology
2014,14(4):101-274 SCI Sun JY, Ling MZ
278Structure and mechanical characteristic of cattle horns
Journal of Mechanics in Medicine and Biology
2014,14(16):563 SCI Yu YJ, Zou M, Xu
SC
279Friction And Wear Properties Of Semi-Metallic Friction Composites With Bionic Non-Smooth Structure
Materials Research Innovations
2014,8(2):387-392 SCI Ma YH, Liu YC,
Peng J
280Microstructure of the wings of dragonfly Pantala flavescens fabricius and finite element analysis of its mechanical property
Optoelectronics and Advanced Materials-Rapid Communications
2014,8(7-8):794-799 SCI Zhao YR, Tong J,
Sun JY
281Preparation and characterization of TiC particulate locally reinforcedsteel matrix composites from Cu–Ti–C system with various C particles
ournal of Asian Ceramic Societies
2014,2, 281–288
Liang YH, Zhao Q, Zhang ZH
282镶嵌式仿生耦合功能表面流体介质控制机制研究 农业机械学报 2014,45(6):32
4-328 EI田丽梅,王银慈,高梽桦,商震,任露泉
283基于形态仿生的轿车升阻特性的数值模拟
吉林大学学报 (工学版)
2014,44(5):1283-1289 EI 田丽梅,商震,胡国良
等284石鳖抗冲蚀磨损三维数值模拟 农业机械学报 45(增刊):319-
324EI田喜梅,李宏伟,田丽梅
285毛蚶壳形态/材料耦合仿生表面耐冲蚀性能试验 农业机械学报 2014,45:314-
317 EI 张成春,李雪丽,张春艳
286基于多种步态的德国牧羊犬足-地接触分析
吉林大学学报 (工学版)
2014,6:1692-1697 EI
钱志辉, 苗怀彬, 商震,任露泉
287水黾多腿并排表面的疏水性能 高等学校化学学报 2014,35(8):17
26-1730 EI 田为军, 张兴旺, 王骥月, 丛茜
288仿生减阻深松铲设计与试验 农业机械学报 2014, 4(4): 141-145 EI
张金波 ,佟金 , 马云海
289肋条型仿生镇压辊减粘降阻试验 农业机械学报 2014,44(4):
135-144 EI佟金, 张清珠,常原,陈东辉,董文华,张磊磊
290仿生镇压辊减粘降阻的有限元分析与试验验证 农业机械学报 2014,44(7):
85-92 EI 佟金, 张清珠,常原,李默,张磊磊,刘昕
291凸齿镇压器与土壤相互作用的三维动态有限元分析 农业工程学报 2014, 30 (10):
48-58 EI佟金 ,张智泓 ,陈东辉,张清珠
292仿生波纹形开沟器减黏降阻性能测试与分析 农业工程学报 2014,30(5):36
-41 EI 马云海 ,马圣胜 , 贾洪雷
293獾牙与狗牙的微观结构及摩擦学特性 农业工程学报 2014,30(16):4
1-46 EI马云海,马圣胜,高知辉
294免耕播种机有支撑滚切式防堵装置设计与试验 农业工程学报 2014,30(10):1
8-28 EI赵佳乐,贾洪雷,郭明卓 ,姜鑫铭 ,曲文菁 ,王刚
295铲式玉米精密播种机振动特性模型建立与试验 农业机械学报 2014,45(2):88
-93 EI张晓冬,李成华,李建桥,邹猛
296月面重力场下表取采样末端执行器与月壤作用仿真分析
清华大学学报 (自然科学版)
2014,54(7): 859-863 EI 邹猛 ,许述财 , 赵振
家,张金换,张荣荣297仿竹结构薄壁管的轴向耐撞性分析及优化
清华大学学报 (自然科学版)
2014,54(3):299-304 EI
许述财 ,邹猛 ,魏灿刚 ,王龙臻 ,张金换 ,于用军
298基于改进模糊物元模型的设备重要度评价新方法
吉林大学学报 (工学版)
2014,44(1):111-116 EI 吕锋,杨印生,郭长青
299基于叶绿素荧光光谱分析的稻瘟病害预测模型 光谱学与光谱分析 2014,34(4):10
03-1006 EI周丽娜 ,于海业 ,张蕾 ,任顺 ,隋媛媛 ,于连军
300An ingenious replica templated from the light trapping structure in butterfly wing scales
Nanoscale 2013, 5:8500-8506 SCI Han ZW, Niu SC,
Yang M
301Active Anti-erosion Protection Strategy in Tamarisk (Tamarix aphylla)
Scientific Reports 2013,3429(3);1-7 SCI Han ZW, Yin W,
Zhang JQ
302Biomimetic superhydrophobic surface of high adhesion fabricated with micronano binary structure on aluminum alloy
ACS Appl. Mater. Interfaces
2013, 5: 8907-8914 SCI
Liu Y, Liu JD,Li SY, Liu JA, Han ZW, Ren LQ
303A dynamic finite element analysis of human foot complex in the sagittal plane during level walking
360Performance improvement of starch films reinforced with starch nanocrystals (SNCs) modified by cross-linking.
Starch/Stärke
2016,69(1-2),1600025/1-10 SCI
Lili Ren, Youjia Fu, Yanjiao Chang, Man Jiang, Jin Tong, Jiang Zhou.
361Investigation of the potential and mechanism of clove for mitigating airborne particulate matter emission from stationary sources.
Journal of Bionic Engineering
2017,14: 390-400 SCI
Jin Tong, Xin Liu, Ronaldo Maghirang, Kaiqi Wei, Linna Liu, Chun Wang, Yunhai Ma, Donghui Chen, Hongjia Yan, Li Guo.
362Anti-icing performance of superhydrophobic aluminum alloy surface and its rebounding mechanism of droplet under super-cold conditions
Surface & Coatings Technology 2017,331:7-17 SCI
Y. Liu*, X.L. Li, Y.Y. Yan, Z.W. Han, L.Q. Ren
363How to improve the stability and rate performance of lithium-ion batteries with transition metal oxide anodes.
Journal of Material Research
2017,32(1):16-36 SCI
G.Y. Wang*, X.M. Leng, S. Han, Y. Shao., Y. Liu*, J.S. Lian *, Q. Jiang
364A strategy for synthesis of Nanosheets consisting of alternating spinel Li4Ti5O12 and rutile TiO2 lamellas for high-rate anodes of Lithium-lon Batteries
ACS Applied Materials & Interfaces
2017,9:4649-4657 SCI
L.B. Wu, X.N. Leng, Y. Liu, S.F. Wei, C.L. Li, G.Y. Wang, J.S. Lian, Q. Jiang, A. Nie, T.Y. Zhang.
365Direct Laser Writing of Superhydrophobic PDMS Elastomers for Controllable Manipulation via Marangoni Effect
Advance Functional Materials
2017,27,1702946: 1-8 SCI
W. Wang, Y.Q. Liu , Y. Liu , B. Han, H. Wang , D.D. Han, J.N. Wang, Y. L. Zhang, H.B. Sun
366Facile fabrication of flexible graphene FETs by sunlight reduction of graphene oxide
Optics Letters 2017,47(17): 3403-3406 SCI
J.N. Ma, Y. He, Y. Liu, D.D. Han, Y.Q. Liu, J.W. Mao, H.B. Jiang, Y.L. Zhang.
367Facile fabrication of moisture responsive graphene actuators by moderate flash reduction of graphene oxides films
379The fabrication and hydrophobic property of micro-nano patterned surface on magnesium alloy using combined sparking sculpture and etching route
Applied Surface Science
2016,389:80-87 SCI
Y Wu , Y Wang , H Liu , Y Liu , L Guo
380Performance improvement of polymer solar cells by surface-energy-induced dual plasmon resonance
ACS Applied Materials & Interfaces
2016,8,6183-6189 SCI
M.N. Yao, P. Shen, Y. Liu, B.Y. Chen, W.B. Guo, S.P. Ruan, L. Shen
381Femtosecond laser direct writing of flexible all-reduced graphene oxide FET
IEEE Photonics Technology Letters
2016,18(28): 1996-1999 SCI
Y He, Zhu L, Y. Liu, Ma JN, Han DD, Jiang HB, Han B, Ding H, Zhang YL*
382A novel open architecture built by ultra-fine single-crystal Co2(CO3)(OH)2 nanowires and
Journal of Materials Chemistry A,
2016,4:17171-17179
SCI X.N. Leng, L. Wu, Y. Liu, C.L. Li, S.F. Wei, Z.H. Jiang, G.Y
reduced graphene oxide for asymmetric supercapacitors
Wang *, J.S. Lian, Q. Jiang
383Surface and interface engineering of graphene oxide films by controllable photoreduction
The Chemical Record
2016,16:1244-1255 SCI
Y.Q. Liu, Y.L. Zhang *, Y. Liu, H.B. Jiang, D.D. Han, B. Han, J. Feng, H.B. Sun*
384Graphene quantum dots prepared form chemical exfoliation of multiwall carbon nanotubes: An efficient photocatalyst promoter
Catalysis Communications
2016,74:104-109 SCI
S. Wei, R. Zhang, Y. Liu, H. Ding, Y.L. Zhang*
385Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene
Journal of Materials Science
2016,51(12): 5857-5871 SCI Z.H. Zheng*, Y. Liu,
L. Zhang, H.Y. Wang
386
A facile and novel modification method of beta-cyclodextrin and its application in intumescent flame-retarding polypropylene with melamine phosphate and expandable graphite
Journal of Polymer Research
2016,23(4):1-17 SCI
Z.H. Zheng*, L. Zhang, Y. Liu, H.Y. Wang
387Compressive properties of Al-Si-SiC composite foams at elevated temperatures. Journal of Alloys and Compounds
Journal of Alloys and Compounds
2016,676:239-244 SCI
J.A. Liu*, Q.X. Qu, Y. Liu, R.G. Li, B. Liu
388Bio-inspired few-layer graphene prepared by chemical vapor deposition on femtosecond laser-structured Cu foil