-
AVERWE
MANUFACTURED IN U.S.A.
Copyright © 2018 all Rights Reserved - 1 -
Fax 1-913-831-2974www.weaver-company.com
Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106
uSa CALL TOLL FREE 1-800-255-6214Phone 1-913-831-1800
DependableMADE IN the U.S.A.
Complete -with Self-Centering Jigs, Patterns and Industrial
Shaper Cutters
Powerful MotorsSolid Spindles,
heavy tops steel frames.
For 2nd Power Feeder add $2,995
Three Shaper Cabinet Door System with Air Tenon, Power Feeder,
Cutters, Crown Jigs & Patterns, etc:
3 Phase System $26,3951 Phase System $26,995
CALL FOR QUOTE ON YOUR CUSTOM SYSTEM NEEDS!
With your Weaver System you will receive a PRE SETUP SYSTEM AND
DOOR SAMPLES produced by the system.
Sawblades Ball Bearing Rub Collars Warning DiscsPages 181 Pages
136 Pages 137
Cabinet Door Shaper Systems - Pages 7-41
Cabinet & House Door Systems, Equipment & Tooling“put
the best to work in your Shop”
catalog May 2018
Flat Mount Crown & Straight Panel Raising SetupPage 150
Flat Mounting Raised Panel Hold down
Flat Mounting
Dust Sheild
Crown Panel Raising
Straight Panel Raising
Flat M
ounting
Raised
Panel G
uides
Shaper Essentials™for Weaver Shapers Pages 52-79, Flat Mount
Pages 139-161
Machine a crown raiseD panel Door . . .
FAST
02:52minutes seconds
House Door Shaper SystemsPages 43-51
Cabinet Door Shaper Systems Pages 6-41
Variable SpeedBelt Power Feeder
Pages 164
Edge Sander Pages 178
Multiple Spindle Drill Machine Pages 179
Air Tenon Jigs Pages 5Coping Hold
Down Page 166
Air Crown Door Jigs & Patterns Pages 170-177
Shaper Cutters Pages 80-135
Cabinet Door Shaper Systems Pages 7-41
House Door Shaper Systems Pages 43-51
Crown Rail & Panel PatternsCrown Rail Jig
Crown Panel Jig
Manual Crown Door Jigs & Patterns Pages 168-169
www.weaver-sales.comwww.weaver-company.com
-
2 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 2 - Copyright © 2018
all Rights Reserved
Cover Cabinet Door 3 Shaper System for Crown Raised Panel
Doors
2 Table of Contents4 Edge Sander, Air Crown Jigs & Patterns,
Multiple Spindle Drills, Manual Crown Panel & Rail Jigs and
Patterns5 Air Tenon Jigs 6 Weaver Variable Speed Power Feeder
9 Shaper Systems Table of ContentsCabinet Door Shaper
Systems
6 Crown Raised Panel Shaper, 2 Shaper Shaker Cabinet Door
System,6 2 Shaper Glass Mullion Cabinet Door System 7 3 Shaper
Cabinet Door 5/8” Panel - Brazed Tip Tooling8 6 Shaper Cabinet Door
5/8” Panel - Insert Tooling
10 12 Shaper Cabinet Door 3/4” Panel - Brazed Tip Tooling12 9
Shaper Cabinet Door 3/4” Panel - Brazed Tip Tooling 14 3 Shaper
Cabinet Door 3/4” Panel - Brazed/Insert Tooling 18 2 Shaper Glass
Mullion Cabinet Door 19 6 Shaper Cabinet Door 3/4” Panel -
Brazed/Insert Tooling 26 1 Shaper Door Edge Shaper - Brazed Tooling
- Continuous27 1 Shaper Door Edge Shaper - Insert Tooling 28 2
Shaper Shaker Cabinet Door Frame - Insert Tooling
52 Shaper Essentials for Weaver Shapers Table of Contents53
Crown Panel Trimming ...........Manual Panel Jig 54
................................................Manual Coping Jig
-Continuous Fence - Trim Table55
................................................Air Tenon Jig -
Continuous Fence - Trim Table56
................................................Coping Hold Down -
Split Fence57 ................................................Air
Tenon Jig - Split Fence - Trim Table 58 Tenon
......................................Coping Hold Down - Continuous
Fence59 ................................................Air Tenon
Jig - Continuous Fence 60
................................................Coping Hold Down -
Split Fence 61 ................................................Air
Tenon Jig - Split Fence 62 Stile & Rail Sticking
................Sticker Plate with Hold Down 63
................................................Sticker Plate &
Power Feeder 64
................................................Crown Rail Sticking
- Manual Setup 66
................................................Sticker Guide &
Fence with Hold Down67
................................................Sticker Guide &
Fence with Power Feeder
68 Panel Raising .............................Single Raise with
Hold Down 69
...................................................Single Raise
with Hold Down & Power Feeder70
...................................................Partial Offset
with Hold Down 71
...................................................Partial Offset
with Hold Down & Power Feeder72 Crown Rail &Panel
Trimming....Shapermaster™ Air Jig - Dead Collar73
...................................................Shapermaster™
Air Jig - Bearing 74 Crown Panel Raising
.................Shapermaster™ Air Jig - Dead Collar75
...................................................Shapermaster™
Air Jig - Bearing 76 Crown Rail Sticking
...................Shapermaster™ Air Jig - Dead Collar77
...................................................Shapermaster™
Air Jig - Bearing 78 Door Edge
.................................Continuous Fence 79
...................................................Split Fence
Table of ContentsWeaver Catalog - May 2018
Page 1 of 2
80 Shaper Cutters Table of Contents81 Raised Panel Cutters
.................... 5/8” Single Raise or 3/4” with Partial Back
Raise - Freeborn82
...................................................... 3/4” Panels,
1/2” Panels - Freeborn83
...................................................... 5/8” Panels
Single Raise or 3/4” with Partial Back Raise - Insert Heads/Tips-
Freeborn84 ......................................................
3/4” Panels - Insert Heads/Tips- Freeborn85
...................................................... 5/8” Single
Raise or 3/4” with Partial Back Raise - Byrd86
...................................................... 5/8” Panels
Single Raise or 3/4” with Partial Back Raise87
...................................................... Shaker
Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Freeborn88
...................................................... Shaker
Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd
87 Cabinet Door Stile & Rail Sets ..... Shaker Cabinet Door
Sets, 5/8” or 1/2” Shaker Panel - Freeborn88
...................................................... Shaker
Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd 89
...................................................... Cabinet Door
Sets - Easement - Byrd 90
...................................................... Cabinet Door
Glass Sets - Easement - Byrd 91
...................................................... Shaker
Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd 92
...................................................... Cabinet Door
Sets - Easement - Freeborn93
...................................................... Cabinet Door
Sets - Freeborn 94
...................................................... Cabinet Door
Sets - Easement Brazed Tenon/Insert Stile - Freeborn 95
...................................................... Cabinet Door
Sets - Brazed Tenon/Insert Stile - Freeborn 96
...................................................... Cabinet Door
Sets - Easement Insert Cutters - Freeborn97
...................................................... Cabinet Door
Sets - Insert Cutters - Freeborn98
...................................................... Cabinet Door
Sets - Insert Cutters - Multiple Profile - Eased, Non-Eased-
Freeborn99 ......................................................
Cabinet Door Sets - Braised Tip - Easement
100 ......................................................
Cabinet Door Sets - Braised Tip 101
...................................................... Cope &
Pattern, Window Sash - Freeborn
Page
House Door Shaper Systems43 Crown & Square - Solid Panel
& Glass Mullions System44 Straight Tenon Shaper46 Straight
Sticking Shaper48 Straight Panel Raising Shaper 50 Crown Rail,
Panel & Mullion Shaper
30 2 Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling32 1
Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling 34 1 Shaper
Shaker Straight Panel Raising 36 1 Shaper Cabinet Door 3/4” Panel -
Brazed Tooling -
Coping Hold Down - Power Feeder37 1 Shaper Cabinet Door 3/4”
Panel - Insert Tooling -
Air Tenon Jig - Power Feeder
www.weaver-company.com
-
- 3 -
Fax 1-913-831-2974
www.weaver-company.com
Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106
uSa
May 2018 - 3
CALL TOLL FREE 1-800-255-6214Phone 1-913-831-1800 Copyright ©
2018 all Rights Reserved
Table of ContentsWeaver Catalog - May 2018
Page 2 of 2
163 Power Feeder Belts 163 Power Feeder Roller to Belt
Conversion Kits, Power Feeder Rollers 164 Power Feeder
165 Steel Sticker Setup Plate 166 Air Tenon Fixture, Manual
Coping Hold Down
168 Crown Door Jigs & Patterns 168 Crown Door Jigs - Manual
170 Crown Door Patterns (Wood) 171 Shapermaster - 24” Air Rail
& Panel Jigs & Patterns 174 Shapermaster - 19” Air Rail
& Panel Jigs & Patterns 176 Shapermaster - 32” Air Rail
& Panel Jigs & Patterns
178 Edge Sander 179 Multiple Spindle Drill Machine 180 Switches,
Motors & Shaper Mandrels
181 Sawblades
182 Back Cover: 2 Shaper Crown Glass Mullion Cabinet Door
System, Shapermaster Air Jigs & Patterns,Manual Jigs &
Patterns, Power Feeder, Air Tenon Jigs.
Page Shaper Cutters (cont.)
112 House Door Stile & Rail Sets ......... 1-3/8”-1-3/4”
Stock - Freeborn 114
....................................................... 2-1/4”
Stock - Freeborn 116
.......................................................
1-3/8”-1-3/4” Glass - Freeborn 118
....................................................... 2-1/4”
Glass - Freeborn 120 Raised Panel Cutters ....................
Stehle “While Supplies Last!” 122 Square Edge Cutters
..................... Stehle “While Supplies Last!” 123 Square Edge
& Bevel Cutters ....... Stehle “While Supplies Last!” 124
Drawer Cutters .............................. Stehle “While
Supplies Last!” 125 Detail Cutters ................................
Stehle “While Supplies Last!” 126 V-Panelling Cutters
........................ Stehle “While Supplies Last!” 127 Convex
Half Round Cutters ........... Stehle “While Supplies Last!” 128
Concave Half Round Cutters ........ Stehle “While Supplies
Last!”
102 Door Edge Cutters ..........................Profiles - Byrd
103
........................................................Profiles -
Freeborn 107 Door Edge Detail, Reversible .........Profiles -
Freeborn 108 Rounds & Groovers ........................Profiles
- Freeborn 109 Easing Sets
.....................................Profiles - Freeborn 110 Glue
Joint, Flooring ........................Profiles - Freeborn
129 Multiform Deluxe Slip Stone .......... 130 Convex Quarter
Round Cutters ..... Stehle “While Supplies Last!” 131 Concave
Quarter Round Cutters .. Stehle “While Supplies Last!” 132 3/4”
Bore 2 Wing Cutters .............. Stehle “While Supplies
Last!”
133 HSS House Door Cutters .............. Stehle “While Supplies
Last!” 134 Molding Cutters ............................ Stehle
“While Supplies Last!”
136 Cutter Accessories ........................ Ball Bearing Rub
Collars, Warning Disc, Spacers, Shims
138 ......................................................
T-Bushings, Spacers, Shims
150 Panel Raising ................................ Single Raise
Hold Down 151
...................................................... Single Raise
Hold Down & Power Feeder 152
...................................................... Partial
Offset Hold Down 153
...................................................... Partial
Offset Hold Down & Power Feeder 154 Crown Rail & Panel
Trimming ....... Shapermaster™ Air Jig - Dead Collar 155
......................................................
Shapermaster™ Air Jig - Bearing 156 Crown Panel Raising
.................... Shapermaster™ Air Jig - Dead Collar 157
......................................................
Shapermaster™ Air Jig - Bearing 158 Crown Rail Sticking
....................... Shapermaster™ Air Jig - Dead Collar 159
......................................................
Shapermaster™ Air Jig - Bearing 160 Door Edge
..................................... Continuous Fence 161
...................................................... Split
Fence
139 Shaper Essentials Flat Mount Table of Contents 140 Tenon
............................................ Coping Hold Down -
Continuous Fence 141
...................................................... Air Tenon
Jig - Continuous Fence 142
...................................................... Coping Hold
Down - Split Fence 143
...................................................... Air Tenon
Jig - Split Fence 144 Stile & Rail Sticking
....................... Sticker Plate with Hold Down 145
...................................................... Sticker
Plate & Power Feeder 146
...................................................... Crown Rail
Sticking - Manual Setup 147
...................................................... Sticker
Guide & Fence with Hold Down 148
...................................................... Sticker
Guide & Fence with Power Feeder 149 Crown Panel Trimming
.................. Manual Jig
Page Shaper Cutters (cont.)
House Door Shaper Systems43 Crown & Square - Solid Panel
& Glass Mullions System44 Straight Tenon Shaper46 Straight
Sticking Shaper48 Straight Panel Raising Shaper 50 Crown Rail,
Panel & Mullion Shaper
30 2 Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling32 1
Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling34 1 Shaper
Shaker Straight Panel Raising36 1 Shaper Cabinet Door 3/4” Panel -
Brazed Tooling -
Coping Hold Down - Power Feeder37 1 Shaper Cabinet Door 3/4”
Panel - Insert Tooling -
Air Tenon Jig - Power Feeder
www.weaver-company.com
-
“Gives Your Company The Edge It Needs”
DependableMADE IN the
U.S.A.Drive Wheel & Table Wheel are set back of Platen - any
length of mate-
rial can be sanded
EDGE SANDER
(4” Dust Chute)
Baldor Motors
Magnetic Starter Switch
Steel Platen6” wide, 48” long
straight & flat
The table adjusts easily with a simple turn of the crank,
allowing the use of the entire width of the sanding belt
Quick Action Release Makes Changing the
belts fast - Belt aligning is
quickly made by adjusting the knob lo-
cated on top of the machine.
Edge SandersItem No. Description Price
ES1753 5 HP, 3 Ph. $8,495 ES1751 5 HP, 1 Ph. $8,995
ESXSP180 180 Grit $18 ESXSP120 120 Grit $18 ESXSP100 100 Grit
$20 ESXSP080 80 Grit $20 ESXSP060 60 Grit $22 ESXSP036 36 Grit
$22
(6” width x 120” length - Cloth Backing)
Edge Sander Belts
Solid table l a m i n a t e d h a r d w o o d6 feet long
Welded steel frame - rigid construction
A C C U R A T E - E F F O R T L E S S
A i r J i g s r i d e s o n a n a t h i n c u s h i o n o f a i
r !
Opening Item No. Price
24” AJ2402 $1,995
CROWN RAIL & PANEL JIGSHAPERMASTER
24” Opening Work with Stock up to
21/4” Thick
MADE IN the U.S.A.
10 Styl
es Avail
able!
PLEXIGLASS RAIL & PANEL PATTERN SETS
Pattern Set Shown:
#PA2417 $365
For use with Shapermaster Air Crown Rail & Panel JigsTM
Built In Rack & Pinion Center-ing Device
Pneum
atic Cla
mps &
Air Rid
e
C R O W N D O O R J I G S A R E F A S T E RJust imagine, with
these SELF-CENTERING JIGS you will not have to try to divide
177/16” by 2 or 1115/16” by 2 or 95/16” by 2, and so on.
These jigs will also cut in half the number of times your
employees will have to use their ruler saving you untold hours of
time spent measuring and doing arithmetic. Now you and your
employees can spend more time actually producing crown raised panel
doors.
Wide Selection of Popular Patterns Available!
CROWN RAIL JIGS This jig features a built-in rack & pinion
gear centering device for top Rail.
MADE IN the U.S.A.
Table glides on ball bearing rollers
Steel Gears
MADE IN the U.S.A.
Adjustable table depth stops fordifferent cabinet widths.
11 S
pind
les
2” B
etwe
en C
ente
rs
Welded steel frame - rigid construction
Fast, Efficient,Simple to operate!
Multiple Spindle Drill For Adjustable Shelving
Spring loaded index pins for quick line boring
Adjustable Depth Guage - drills uniform depth regardless of the
thickness of the material
Drill two rows of eleven holes in your material 2” wide to 26”
wide and any length material in 10 seconds
Rolling table for parallel drilling . . .YOU DON’T HAVE TO TURN
THE MATERIAL END-TO-END
1/4” or 5mm brad point drill bits
included.
Item No. Description
DM1172 1 HP, 1 PH, 72” Table DM1372 1 HP, 3 PH, 72” Table DM1142
1 HP, 1 PH, 42” Table DM1342 1 HP, 3 PH, 42” Table
Price
$11995$11895$11945$11845
CROWN PANEL JIGSThis jig features a built-inrack & pinion
gear centeringdevice for crown panels.
CROWN RAIL PATTERN SET (PA427 $265 Shown) CROWN PANEL PATTERN
SET (PA417 $265 Shown)
(42” Table shown - 72” also available)
CROWN PANEL & RAIL JIGS & PATTERNSJM330 Crown Rail Jig
$465 JM310 Crown Panel Jig $495
TM
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Fax 1-913-831-2974Phone 1-913-831-18004 - May 2018 - 4 -
Copyright © 2018 all Rights Reserved
www.weaver-company.comhttp://weaver-company.com/store/edge-sanders/edge-sander-1751/http://weaver-company.com/store/edge-sanders/edge-sander-1753/http://weaver-company.com/store/edge-sanders/edge-sander-belt-sp036/http://weaver-company.com/store/edge-sanders/edge-sander-belt-sp060/http://weaver-company.com/store/edge-sanders/edge-sander-belt-sp180/http://weaver-company.com/store/edge-sanders/edge-sander-belt-sp120/http://weaver-company.com/store/edge-sanders/edge-sander-belt-sp100/http://weaver-company.com/store/edge-sanders/edge-sander-belt-sp080/http://weaver-company.com/store/crown-door-jigs-patterns/shapermasters-air-jig/
-
May 2018 - 5
Catalog May 2018
These jigs will also cut in half the number of times your
employees will have to use their ruler saving you untold hours of
time spent measuring and doing arith-metic. Now you and your
employees can spend more time actually producing crown raised panel
doors.
EXTENDED HOURS - We come in early and stay late to accomodate
both the East and West coast, so you can call now.
TOLL FREE NUMBER - Call 1-800-255-6214 with your order or
question for customer service - our staff is eagerly waiting to
help you. We arehere most Saturdays.
QUICK DELIVERY - Many items are in stock. We ship ground UPS and
large items are shipped via motor freight. Next Day Air and
Priority Mail 2nd Day Air UPS is available.
CUSTOM SERVICE - For your custom ball bearing rub collars,
custom shaper cutters, or custom shaping system, call us today.
FOR YOUR CONVENIENCE
MADE IN the U.S.A.
LIMITED WARRANTY Products sold or manufactured by us have
limited warranty of one year from the date of purchase against
defects in material and workmanship. No other warranties are
implied.
FAX (913) 831-2974 PHONE (913) 831-1800
DVDs AVAILABLE
Weaver Company1108 South 37th Street
Kansas City, KS 66106 U.S.A.
1-800-255-6214
AJ1201RW 12” Air Tenon Jig “right”, counter clockwise cutter
rotation.
AJ1201LW 12” Air Tenon Jig “left”, clockwise cutter
rotation.
AJ1801RW 18” Air Tenon Jig “right”, counter clockwise cutter
rotation.
AJ1801LW 18” Air Tenon Jig “left”, clockwise cutter
rotation.
WARNING - The Equipment and Tooling in this literature can be
dangerous.
ALWAYS - Be sure to follow these safety rules and all other
general shop safety procedures plus your local, state and national
safety standards when using the equipment and tooling in this
literature.
ALWAYS - Keep hands so they cannot be pulled or pushed into
cutters.ALWAYS - Wear safety glasses.
ALWAYS - Keep all cutters completely covered with proper
holddowns, fences, warning discs and Dust Shields.
NOTE: In some of our pictures and illustrations the warning
discs, Dust Shields and some accessories have been removed for
better illustration of the cutter and work.
THESE JIGS RIDE IN A STANDARD 3/8” x 3/4” GROOVEIN YOUR SHAPER’S
TOP.
Air Tenon Fixtures:
AJ1201LW 12” Wide “Left” $ 1,195AJ1201RW 12” Wide “Right” $
1,195
AIR TENON FIXTUREThe Air Tenon Fixture comes in 4 models. Air
Jigs ride on a thin cushion of air!
ACCURATE - EFFORTLESS
01LWAJ18 18” Wide “Left” $ ,750101RWAJ18 18” Wide “Right” $
,7501
WEAVER WEAVER
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 5 - Copyright © 2018
all Rights Reserved
© 2018 Weaver CompanyAll rights reserved.
Reproduction in whole or part prohibited. Prices subject to
change without notice
LLAME A U.S.A. POR COBRAR AL 1-800-255-6214NUESTRO PERSONAL
HABLA ESPANOL,
ESTAMOS PARA SERVIRLE
www.weaver-company.comhttp://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1201lw/http://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1201rw/http://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1801lw/http://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1801rw/http://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1201lw/http://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1801rw/http://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1801lw/http://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1201rw/
-
6 - May 2018
World Renowned Quality1-800-255-6214 Weaver Company (Copyright c
2018 Weaver Company All Rights Reserved)1108 South 37th Street -
Kansas City, 66106
. . . Shaper Systems, Cutters, Shaper Essentials, Saw Blades,
Power Feeders . . .
Weaver Company - 1108 South 37th Street - Kansas City, Kansas
66106-2028
SHAPING MACHINERY & TOOLING FOR YOUR SHOP!
Call Toll Free 1-800-255-6214
Stile & Rail Cut-ter Set
VARIABLE SPEED BELT
POWER FEEDERS
2 SHAPER SHAKER CABINET DOOR SYSTEM FOR $17,995
For your Shaping Needs
Industry Leading Quality & Production made Affordable
CROWN RAISED PANEL SHAPER FOR $6,595
RAISED PANEL HOLD DOWN, GUIDES, BALL BEARING RUB COLLAR
STEEL STICKER
PLATE
AIR TENON JIG
TENON FENCE
Raised Panel Cutter
SHAPER WRENCHES
SHAPER WRENCHES
(Other Profiles Available)
$19,995
GLASS MULLION CABINET DOOR SHAPER SYSTEM
for the frame, divided light & grille mullions ...
1 Phase System $19,9553 Phase System $19,795
SH1316 Shaper 3HP (1-1/4” Spindle 28” x 20” Top)
Weaver Belt Power Feeder
TenonFence
DustShield
Air Tenon Fixture
Sticking Setup For Frame & Mullions
SH1316 Shaper 3HP (1-1/4” Spindle 28” x 20” Top)
Crown Rail Jig
2 Shaper Glass Mullions Cabinet Door System with Air Tenon Jig,
Power Feeder, Cutters and accessories to produce square and crown
glass cabinet doors with grille and true divided light
mullions.
Crown Rail Patterns
AIR TENON FIXTUREOpening 117/8” Wide, Work with Stock up to
21/4” Thick
Air Tenon Fixture#AJ1201RW $1,195
RIDES IN STANDARD 3/8” x 3/4” GROOVE IN SHAPER TOP
MADE IN the U.S.A.
Shaper Wrenches
Dead CollarVariable Speed for running different types of
material and depth of cut
Item No. Description Price PF721W Weaver Double Bond $2,995 Belt
Power Feeder
INDUSTRIAL MACHINE ECONOMICALLY PRICED!
VARIABLE SPEED BELT POWER FEEDERHinged for quick removal -
Easily lifted out of the way to use jig, shaper or change
cutters
Continuous Duty
MADE IN THE U.S.A.
Works Anywhere 110 Volts
300-lb. Torque Motor
Angle of belts are easily adjusted - feed stock into fence or
away from fence.
(Running 3/8” material for Grilles)
CALL TOLL FREECatalog May 2014
http://weaver-company.com/store/house-door-shaper-systems/4-shaper-house-door-system-raised-panel-mullion-glass-mullion-doors-1-phase/http://weaver-company.com/store/house-door-shaper-systems/4-shaper-house-door-system-raised-panel-mullion-glass-mullion-doors-3-phase/http://weaver-company.com/store/air-tenon-fixtures-manual-coping-hold-down/air-tenon-fixture-aj1201rw/http://weaver-company.com/store/power-feeders-power-feeder-components/variable-speed-power-feeder-pf721w/
-
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
Catalog May 2018
Crown Raised Panel Cabinet and House Door Systems, Equipment
& Tooling
QUICK: Be able to come up with add-on orders or replace any
doors needed in the installation of a kitchen . . .
EFFICIENT: Producing custom sizes, types of wood, raise panel,
finished ends, island cabinets, and door designs using convenient
and accurate jigs and patterns . . .
COMPLETE: The job - move those cabinets out of the shop as you
can make the doors and panels you need to finish!
make your production simpler . . .
Wide Selection of Pattern Styles Available Finished Ends,
Wainscotting & more virtually any length
WEAVER DOOR SYSTEMS
DependableMADE IN the U.S.A.
Complete -with Self-Centering Jigs, Patterns and Industrial
Shaper Cutters
Strong -1-1/4” Spindles, cast iron, heavy ribbed tops,
welded
steel frames.
Powerful -Continuous Duty
Baldor Motors
For 2nd Power Feeder add $2,995
Three Shaper Cabinet Door System with Air Tenon, Power Feeder,
Cutters, Crown Jigs & Patterns, etc:
3 Phase System 1 Phase System
$26,495$26,995
3 Shaper Cabinet Door System
$26,495
CALL FOR QUOTE ON YOUR CUSTOM SYSTEM NEEDS!
THIS SYSTEM COMES COMPLETE WITH:
PLUS Dust Hoods, Rub Collars, Fences, Sticking Setup, &
other essentials for machining Crown Raised Panel Cabinet
Doors!
3 - Weaver Heavy Duty Industrial Shapers
Air Tenon Fixture
Weaver Variable Speed Belt power Feeder
Raised Panel Hold Down
Cutters: Raised Panel, Stile & Rail Sets, Panel Trimming
Crown Rail JigCrown Panel Jig
Crown Rail, Crown Panel Hardwood
Pattern Sets
With your Weaver System you will receive a PRE SETUP SYSTEM AND
DOOR SAMPLES produced by the system.
3 Shaper Cabinet Door System
Note: In some of our pictures and illustrations the safety
covers, dust hoods and some accessories have
been removed for better illustration of the cutter and work.
(Other Profiles Available)
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
(Copyright c 2018 Weaver Company All Rights
Reserved)1-800-255-6214
CALL TOLL FREE
Machine a crown raiseD panel Door . . .
FAST
02:52minutes seconds
Crown Raised Panel Cabinet Door Systems, Equipment &
Tooling
May 2018 - 7
Weaver Company
INDUSTRIAL MACHINE ECONOMICALLY PRICED!
http://weaver-company.com/store/cabinet-door-shaper-systems/3-shaper-cabinet-door-system/
-
6 SHAPER CABINET DOOR SYSTEM
CALL FOR QUOTE ON YOUR CUSTOM SYSTEM NEEDS!
Strong - spindles,
heavy tops, welded steel frames.
Dependable
Machine a crown raiseD panel Door . . .
FAST
Minutes Seconds02:52
6 Shaper Cabinet Door System with Air Tenon Jig, 2 Air Crown
Jigs, 2 Power Feeders, Cutters & Patterns, etc:
3 Phase System $57,4951 Phase System $58,995
MADE IN the U.S.A.
6-Shaper Cabinet Door System $57,495
Powerful -Continuous Duty
Motors
Complete -with Self-Centering Jigs,Patterns and Industrial
Shaper Cutters
Cutters: Raised Panel, Stile & Rail Sets, Rail & Panel
Trimming
(Other Profiles Available)
Phone 1-913-831-1800 - Fax 1-913-831-2974
weaver-company.comWeaver Company 1108 South 37th Street
Kansas City, KS 66106-2028 1-800-255-6214CALL TOLL FREE
Note: In some of our pictures and illustrations the safety
covers, dust hoods and some accessories have been removed for
better illustration of the cutter and work.
DeDicaTeD . . .TenoninG
sTile & rail sTicKinG
crown railsTicKinG
crown panel raisinG
sTraiGhT panel raisinG
crown rail & panelTriMMinG
6 shaper cabineT Door sysTeM
With your Weaver System you will receive a PRE SETUP SYSTEM AND
DOOR SAMPLES produced by the system.
weaver-company.com
6 Weaver Heavy Duty Industrial Shapers (3 Standard, 3 Large
Top)
PLUS Hold Downs, Dust Hoods, Rub Collars, Fences, Sticking
Setup, & other accessories for machining Crown Raised Panel
Cabinet Doors
THIS SYSTEM COMES COMPLETE WITH:
Air Tenon Fixture 2 Air Crown Rail & Panel Jigs
Plexiglass Rail & Panel Patterns
2 Weaver Variable Speed Belt power Feeders
Raised Panel Hold Down
(Copyright c 2018 Weaver Company All Rights Reserved)8 - May
2018
-
6-Shaper Cabinet Door System $38,109
May 2018 - 9
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 9 - Copyright © 2018
all Rights Reserved
WEAVERShaper Systems Table of Contents
Price ($)
Page Cabinet Door Shaper Systems 1 Phase 3 Phase
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
,
. ,
50
Crown Rail, Panel & Mullion Shaper
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
18,915
.
13,961
Price ($)
Page House Door Shaper Systems 1 Phase 3 Phase
43 4 Shaper Crown & Square - Solid Panel & Glass
Mullions System . . . . . . . . . . . 59,292 . 57,718 44 Straight
Tenon Shaper . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 12,261 . 11,861 46 Straight
Sticking Shaper . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 13,881 . 13,481 48 Straight Panel
Raising Shaper 14 235 13 484
1 3 Shaper Cabinet Door 5/8” Panel - Brazed Tip Tooling . . . .
. . . . . . . . . . . . . . . 26,995 . 26,395 6 1 Shaper Panel
Raising System. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 6,995 . . 6,595 6 2 Shaper Shaker Cabinet
Door Frame Shaper System . . . . . . . . . . . . . . . . . . . .
17,995 . 17,795 6 2 Shaper Crown Glass Mullion Cabinet Door Shaper
System . . . . . . . . . . . . . . . 19,995 . 19,795 7 3 Shaper
Cabinet Door 5/8” Panel - Brazed Tip Tooling . . . . . . . . . . .
. . . . . . . . . 26,995 . 26,495 8 6 Shaper Cabinet Door 5/8”
Panel - Insert Tooling . . . . . . . . . . . . . . . . . . . . . .
. . 58,995 . 57,495
10 12 Shaper Cabinet Door 3/4” Panel - Brazed Tip Tooling . . .
. . . . . . . . . . . . . . . 118,48 .0 116,38012 9 Shaper Cabinet
Door 3/4” Panel - Brazed Tip Tooling . . . . . . . . . . . . . . .
. . . . . 79,660 . 78,460 14 3 Shaper Cabinet Door 3/4” Panel -
Brazed/Insert Tooling . . . . . . . . . . . . . . . . . . 31,995 .
31,395 18 2 Shaper Glass Mullion Cabinet Door . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 19,995 . 19,795 19 6
Shaper Cabinet Door 3/4” Panel - Brazed/Insert Tooling . . . . . .
. . . . . . . . . . . . 59,495 . 57,995 26 1 Shaper Door Edge
Shaper - Insert Tooling. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 9,000 . . 8,900 27 1 Shaper Door Edge - Insert
Tooling . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
. . . . . . . .9,000 . . 8,950 28 2 Shaper Shaker Cabinet Door
Frame - Insert Tooling . . . . . . . . . . . . . . . . . . . . .
17,995 . 17,795 30 2 Shaper Shaker Cabinet Door Frame - Brazed Tip
Tooling . . . . . . . . . . . . . . .. . 12,995. 12,79532 1 Shaper
Shaker Cabinet Door Frame - Brazed Tip Tooling . . . . . . . . . .
. . . . . . . . 7,695 . . 7,595 34 1 Shaper Shaker Straight Panel
Raising . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 6,495 . . 6,395 36 1 Shaper Cabinet Door 3/4” Panel - Brazed
Tooling - Coping Hold Down. . . . . . 15,595 . 15,195 37 1 Shaper
Cabinet Door 5/8” Panel - Insert Tip Tooling - Air Tenon . . . . .
. . . . . . . 16,395 . 15,995 38 1 Shaper Cabinet Door 5/8” Panel
Brazed Coping - Hold Down . . . . . . . 12,595 . 12,195
182 2 Shaper Glass Mullion Cabinet Door . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 19,995 . 19,795
-
10 - May 2018
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
(Copyright c 2018 Weaver Company All Rights Reserved)
#1201 #1202
#1203 #1204
#1206
#1212#1211
#1209 #1210
TENONING
The Air Tenon Jig secures the rail with pneumatic clamp and
glides on an ultra thin cushion of air making the operation
effortless.
STILE AND RAIL STICKING
This Sticking set up sizes material at the same time it is being
shaped. It cuts consistantly and easily
SHAKER STRAIGHT STICKING
SHAKER STRAIGHT PANEL RAISING
Power Feeding panels with Hold Down & guides makes raising
panels accurate & easy.
SHAKER TENONING
The Air Tenon Jig secures the rail with air clamp on a thin
cushion of air for an effortless operation.
STRAIGHT PANEL RAISING
1
3
9
2
11
CROWN PANEL RAISING6
12 DOOR EDGE
Weaver’s 12 Shaper System Gives You These Capabilities:
CROWN RAIL STICKING
This will shape the crown rail as the pattern follows the rub
collar. The operation is made easier by the Jig gliding on a thin
cushion of air.
4
This Sticking set up sizes material at the same time it is being
shaped. It cuts consistantly and easily.
With the Fence, Hold Down and Drawer Front Jig, this is an
excellent Door & Drawer edge shaping operation.
Power Feeding panels with Hold Down & guides makes raising
panels accurate & easy.
#1205CROWN RAIL & PANEL TRIMMING
This trims crown rail & panelas the pattern follows the rub
collar.
5
The operation is made easier by the Jig gliding on a thin
cushion of air. #1207GLASS TENONING
The Air Tenon Jig secures the rail with pneumatic clamp and
glides on an ultra thin cushion of air making the operation
effortless.
7
1-800-255-6214CALL TOLL FREE
#1208
This Sticking set up sizes material at the same time it is being
shaped. It cuts consistantly and easily.
GLASS STRAIGHT STICKING8(3/8” material for Grilles)
CROWN RAISED PANEL GLASS MULLIONS SHAKER PANEL DOOR EDGE
This will raise the crown as the panelpattern follows the rub
collar. The operation is made easier by the Jig gliding on a thin
cushion of air.
10
-
May 2018 - 11
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
Rail Cutter
1-800-255-6214CALL TOLL FREE
CROWN RAIL STICKING
CROWN RAIL & PANEL TRIMMING
Shaper 3HP1-1/4” Spindle
20”x28” top, Table Top Groove
Tenon Fence
Dust Shield
Stile & Rail Cut-ters - Rail Half
Air Tenon Jig
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x 28” top.
Warning Disc
Stile & Rail Cutters - Stile Half
Dust Shield
Power Feeder
Sticker Spring Guide & Fence
6
TENONING
1STILE AND RAIL
STICKING
2
STRAIGHT PANEL RAISING
3 4 5
12 Shaper Crown Raised Panel, Glass & Shaker Cabinet Door
System with Door Edge $116,380 6 Shaper Crown Raised Panel
Cabinet Door System $57,995
Shaper 5 HP1-1/4” Spindle
28”x40” top
Warning Disc
Dust Shield
Stacked Square Edge Cutter
Plexiglass Rail Patterns
Dead Collar
Lead Fence
Plexiglass Panel Patterns
#1206#1205#1204#1203#1202#1201
CROWN RAIL & PANEL TRIMMING
4
CROWN PANEL RAISING
5 #1205
CROWN RAIL STICKING
6#1206
STRAIGHT PANEL RAISING 3#1203
STILE AND RAIL STICKING
2
#1202
TENONING 1#1201
Hold Down
Warning Disc
Dust Shield
Shaper 3 HP1-1/4” Spindle 28” x 40” top
Stile & Rail Cutters - Stile Half
Lead Fence
Shapermaster Rail Jig
Dead Collar
CROWN PANEL RAISING
Shaper 5 HP1-1/4” Spindle
28”x40” top
Shapermaster Panel Jig
Lead Fence
Dust Shield
Raised Panel Cutters w/Partial Under Cuter
Dead Collar
Warning Disc
Shaper 5HP1-1/4” Spindle 20”x28” top.
Power Feeder
Dust Shield
Raised Panel Cutters w/Partial Under Cuter
Raised Panel Guide
Raised Panel Hold Down
Warning Disc
Shaper Wrenches
6 Shaper Crown Raised Panel Cabinet Door System (#1201, 1202,
1203, 1204, 1205, 1206) 2 Shaper Glass Mullion Cabinet Door System
(#1207, 1208) 3 Shaper Shaker Cabinet Door System (#1209, 1210,
1211) 1 Door Edge Shaper (#1212) 12 Shaper Crown Raised Panel,
Shaker & Glass Cabinet Door System with Door Edge (#1201 thru
#1212)
Weaver Door Systems: 1 PhaseSystem 3 PhaseSystem
#1204
(Other Cutter Profiles Available)
2 Shaper Glass Mullion Cabinet
Door System
3 Shaper Shaker Cabinet Door
System $26,695
10SHAKER STILE & RAIL STICKING
SHAKER TENONING
9
12
GLASS TENONING
7GLASS STILE AND
RAIL STICKING
8DOOR EDGE
12
Drawer Front Hold Down
Warning Disc
SHAKER TENONING
9 1110
SHAKER PANEL RAISING
11
SHAKER STRAIGHT PANEL RAISING
SHAKER STRAIGHT STICKING
#1211#1210#1209#1212
#1208#1207
#1209 #1210
Door EdgeShaper$11,895
DOOR EDGE#1212
#1211
GLASS STILE AND RAIL STICKING
8
#1208
7
$19,795GLASSTENONING#1207
Shaper 5 HP1-1/4” Spindle 20”x28” top.
Power Feeder
Dust Shield
Shaker Raised Panel
Raised Panel Guides
Raised Panel Hold Down
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x28” top.
Shaker Stile & Rail Cutters - Stile Half
ShakerSticker Plate
Setup
Dust Shield
Power Feeder
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Tenon Fence
Shaker Stile & Rail Cutters - Rail Half
Air Tenon Jig
Warning Disc Warning Disc
Dust Shield
22” Crown Rail Jig
Tenon Fence
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Dust Shield
Glass Stile & Rail Cutters - Rail Half
Air Tenon Jig
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x28” top.
Warning Disc
Glass Stile & Rail Cutters - Stile Half
Glass Sticker Plate Setup
Dust Shield
Power Feeder
Crown Rail Pat-
terns
Dead Collar
BBRCDead Collar
Shaper 3 HP1-1/4” Spindle 28”x40” top
with table top groove
Power Feeder
Door Edge Fence
Dust Shield
Door Edge Cutters
General Hold Down
With your Weaver System you will receive a PRE
SETUP SYSTEM AND DOOR SAMPLES produced by the
system.
$ 54,495
$ 19,995$ 26,995$ 11,995-------------
$118,480
$ 57,995
$ 19,795$ 26,595$ 11,895-------------
$116,480
(Copyright c 2018 Weaver Company All Rights Reserved)
http://weaver-company.com/store/cabinet-door-shaper-systems/brazed-tip-tooling-single-phase-12-shaper-system/
-
12 - May 2018
TENONING
The Air Tenon Jig secures the rail with pneumatic clamp and
glides on an ultra thin cushion of air making the operation
effortless.
1a
SHAKER STRAIGHT PANEL RAISING
The Hold Down, and Guides ensure the work is accurate.
SHAKER TENONING
The Air Tenon Jig secures the rail with air clamp and glides on
a thin cushion of air for an effortless operation.
6
8
Weaver’s 9 Shaper System Gives You These Capabilities:
DOOR EDGE
CROWN PANEL TRIMMING
This trims crown panelas the rub collar, follows the
pattern.
1b
STILE AND RAIL STICKING
This Sticking set up sizes material at the same time it is being
shaped. It cuts consistantly and easily.
2a
#901a #901b
#902b#902a
#903a
#904 #905
#908
#906 #907
This will shape the crown rail as the rub collar, follows the
pattern. The operation is made fast and uniform by use of the jig
& pattern.
CROWN RAIL STICKING2b
GLASS STRAIGHT STICKING
STRAIGHT PANEL RAISING
With the Fence, Hold Down and Drawer Front Jig, this is an
excellent Door & Drawer Edge shaping operation.
9
3a CROWN PANEL RAISING
This Sticking set up sizes material at the same time it is being
shaped. It cuts consistantly and easily.
The Air Tenon Jig secures the rail with pneumatic clamp and
glides on an ultra thin cushion of air making the operation
effortless.
GLASS TENONING4 5(3/8” material for Grilles)
Rub Bearing
1-800-255-6214CALL TOLL FREE
CROWN RAISED PANEL GLASS MULLIONS SHAKER PANEL DOOR EDGE
#903b3b
#909
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
SHAKER STRAIGHT STICKING
This Sticking set up sizes material at the same time it is being
shaped. It cuts consistantly and easily.
7
(Copyright c 2018 Weaver Company All Rights Reserved)
The Raised Panel Hold Down, Ball Bearing Rub Collar and Guides
allow the crown panels to be raised accurately.
Rub BearingRub Bearing
The Hold Down, and Guides ensure the work is accurate.
-
May 2018 - 13 Phone 1-913-831-1800 - Fax 1-913-831-2974
weaver-company.comWeaver Company
1108 South 37th StreetKansas City, KS 66106-2028
STRAIGHT & CROWN STILE AND RAIL STICKING 2a/2b
TENONING & PANEL TRIMMING
1a/1b
3 Shaper Crown Raised PanelCabinet Door System $26,795
9 Shaper Crown Raised Panel, Glass & Shaker Cabinet Door
System with Door Edge $78,460
STRAIGHT & CROWN PANEL RAISING
3a/3b
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Tenon Fence
Dust Shield
Stile & Rail Cut-ters - Rail Half
Air Tenon Jig
Warning Disc
#901a#901b
#902a#902b
#903a#903b
Raised Panel Guides
Shaper 5HP1-1/4” Spindle20”x28” top.
Dust Shield
Raised Panel Cutters w/Partial Under Cuter
Raised Panel Hold Down
Warning Disc
Shaper 3HP1-1/4” Spindle20”x28” top.
Warning Disc
Stile & Rail Cutters - Stile Half
Dust Shield
Power Feeder
Sticker Plate Setup
Weaver Door Systems:
3 Shaper Crown Raised Panel Cabinet Door System (#901a/b,
#902a/b, #903a/b) 2 Shaper Glass Mullion Cabinet Door System (#904,
905) (for crown, add $382) 3 Shaper Shaker Cabinet Door System
(#906,907,908) 1 Door Edge Shaper (#909) 9 Shaper Crown Raised
Panel, Shaker & Glass Cabinet Door System with Door Edge
(#901a/b thru #909)
1-800-255-6214CALL TOLL FREE
1 PhaseSystem
$ 27,395$ 19,265$ 24,000$ 9,000-------------
$ 79,660
3 PhaseSystem
$ 26,795$ 19,065$ 37,700$ 8,900-------------
$ 78,460
3b3a
#903a #903b
STRAIGHT PANEL RAISING
CROWN PANEL RAISING
STILE AND RAIL STICKING
2a
CROWN RAIL STICKING
2b
#902a #902b
CROWN PANEL TRIMMING
1bTENONING
1a
#901a#901b
Panel Trimming Table
Crown Panel Jig
Crown Panel Patterns
Warning Disc
Panel Trimming Cutter
Dead Collar
Warning Disc
Crown Rail Pat-terns
Dead Collar
Crown Rail Jig
(Other Cutter Profiles Available)
2 Shaper Glass Mullion Cabinet
Door System$19,065
Door EdgeShaper
$8,900
GLASS STILE AND RAIL STICKING
5GLASS TENONING4
3 Shaper Shaker
Cabinet Doors System$23,700
8
SHAKER PANEL RAISING
7SHAKER STICKING
SHAKER TENONING6
DOOR EDGE
9
GLASS TENONING
4GLASS STILE AND
RAIL STICKING
5DOOR EDGE
9
Tenon Fence
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Dust Shield
Glass Stile & Rail Cutters - Rail Half
Air Tenon Jig
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x28” top.
Warning Disc
Glass Stile & Rail Cutters - Stile Half
Glass Sticker Plate Setup
Dust Shield
Power Feeder
SHAKER TENONING
6 87
SHAKER PANEL RAISING
SHAKER STICKING
Sticker Plate Setup
Shaper 5HP1-1/4” Spindle20”x28” top.
Dust Shield
Shaker Raised Panel
Raised Panel Guides
Raised Panel Hold Down
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x28” top.
Shaker Stile & Rail Cutters - Stile Half
Dust Shield
Power Feeder
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Tenon Fence
Dust Shield
Shaker Stile & RailCutters - Rail Half
Air Tenon Jig
Warning Disc Warning Disc Warning Disc
Door Edge Cutters
Door Edge Fence
Dust Shield
Drawer Front Hold Down
#904 #905 #906 #907 #908#909
#909
#908
#906#907#905#904
General Hold Down
Ball Bearing Rub Collar
Dead Collar
(For Crown, Add $730)
Shaper 3 HP1-1/4” Spindle 28”x40” top
with table top groove
With your Weaver System you will receive a PRE
SETUP SYSTEM AND DOOR SAMPLES produced by the
system.
Shaper Wrenches
Ball Bear-ing Rub Collar
(Copyright c 2018 Weaver Company All Rights Reserved)
-
14 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 14 - Copyright © 2018
all Rights Reserved
Wood - Stile
Wood - Panel
Your system will arrive with the shaper cutters on the shapers
already adjusted. All accessories will be adjusted, and most
mounted to the shapers. You can start producing shortly after the
equipment arrives. Since the system is three separate shapers, you
can arrange them in a circle, along a wall, or any location in your
shop. You can produce doors with one man or three men - and can
efficiently make 100 doors or make just one door without changing
setups.
This system uses three machines to make a crown raised panel
door, usually consisting of two 3 HP shapers and one 5 HP shaper.
Shaper One is setup for tenoning the rails and panel trimming.
Shaper Two is setup for running straight stiles and shaping crown
rails. Shaper Three is setup for raising crown and straight
panels.
Power feeders are included on the stile and panel shapers. The
Weaver variable speed belt power feeder gives you the capability to
run short rails that are impossible with roller feeders - as well,
they improve the ease of sticking and straight panel raising
operations. The Weaver Power Feeder is quickly lifted up out of the
way so you can do your curved work.
The air tenon jig, fences, sticker plate, raised panel setup,
cutters, crown jigs and patterns are also included. Pattern sizes
and styles can be interchanged rapidly without the need of a ruler
or arithmetic.
MADE IN U.S.A.
3 SHAPER CROWN RAISED PANEL WEAVER
Machine a Crown Raised Panel door in less than 3
minutes - A Square Raised Panel door in
less than 2 minutes.
02:52Minutes Seconds
Manufactured In U.S.A.
CABINET DOOR SYSTEM
IPAGES-SY-3SS-3/4
The system you receive will be preset by a craftsman and shipped
to you with sample.
System Price 1 Phase: 3 Phase
$31,995$31,395
With 2 power feeders, air tenon fixture, set of crown door
patterns, cutters, fences, jigs and fixtures mounted, adjusted and
ready to produce!
Fast
Page 1 of 4
-
May 2018 - 15
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 15 - Copyright © 2018
all Rights Reserved
Top & Bottom Shaper Wrenches - Warning Discs
3 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 1 of 3
Shaper For Tenon and Panel Trimming (with Alloy Brazed Tip Rail
Cutter) Item# Description SH1316 Shaper 3HP (1-1/4” Spindle 20” x
28” Top) SH1X38 Table Groove FREPT-10-010-C-501E 1-1/4” Bore Brazed
Tip Rail Cutter Set AJ1201RW Air Tenon Jig FE27 Split Tenon Fence
WD4166 Warning Disc 4-1/2” OD x 1-1/4” ID DS442 Dust Shield for Air
Tenon & Panel Trimming WR620 Top Wrench WR6180 Bottom
Wrench
SH1316 Shaper 3HP (1-1/4” Spindle 20” x 28” Top)with Table
Groove
WEAVER
(Alloy Brazed Tip Rail Cutter)
Hinged Table Top
Crown Panel Jig
After tenoning, flip down the FE365 table to trim your panels
without changing cutters or spindle height
Panel Trimming
FE365 Hinged Table Top for Trimmer FRE8389 Trimming Cutter 2W
Carbide Sq. Edge DC21621 Dead Collar for 4-3/4”SC 2-1/2”ODx2-5/8”
JM310-22 Crown Panel Jig 22” Opening PA410-17 Hardwood Patterns 2”
Crown - Panel - 17 Pc. WD4166 Warning Disc 4-1/2”ODx1-1/4”ID
Note: In some of our pictures and illustrations the warning
discs, Dust
Shields, and some accessories have been removed for better
illustration of the
cutter and work.
Page 2 of 4
Shaper 1 of 3 Tenon
Shaper 1 of 3 Crown Panel Trimming
Dead Collar 2-1/2”O.D.Square Edge Cutter
2W Carbide for Panel Trimming
Dust Shield Tenon/Trim
Tenon Fence
Set of 17 Crown Panel PatternsDoor sizes 9½” to 26”
-
16 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 16 - Copyright © 2018
all Rights Reserved
Shaper for Stile and Rail Sticking (with Alloy Insert Tip Stile
Cutter) Straight & Crown Setup Item# Description SH1316 Shaper
3HP (1-1/4” Spindle, 20”x28” top) FREIT-10-010-PE 1-1/4” Bore Stile
Head with Insert Tips (3) DC31612 -for-4-3/4”SC - Dead Collar
3-1/2”ODx1-1/2”Tall FE360H Sticker Plate Setup with Hold Down
PA420-17 Hardwood Patterns 2” Crown - Rail - 17 Piece JM330-22
Crown Rail Jig 22” Opening PF721W Variable Speed Double Bond Belt
Feeder DS445 Dust Shield for Curved & Straight Rail WD4246
Warning Disc 4-3/4” ODx1-1/4”ID
SH1316 Shaper 3HP (1-1/4” Spindle, 20”x28” top)
3 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 2 of 3
Dead Collar
Stile Insert Head & Tips
Shaper 2 of 3 Sticking
WEAVER
Sticking Dust Shield
Shaper 2 of 3 Crown Rail Sticking
Note: In some of our pictures and illustrations the warning
discs,
Dust Shields, and some accesso-ries have been removed for better
illustration of the cutter and work.
Weaver Belt Power Feeder
Flat Mount General Hold Down - Included
w/Sticker Plate
Sticker Guide Fence
Outfeed Fence in line with cutters Sticker
Spring Guide
Placement Pins 28”
Steel Plate
Placement Pins
Steel Sticker Setup
JM330 Crown Rail Jig
Page 3 of 4
Stile & Rail Edge
Set of 17 Crown Rail Patternsdoor sizes 9½” to 26”
-
May 2018 - 17
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 17 - Copyright © 2018
all Rights Reserved
Raised Panel Hold Down
SH1516 Shaper5HP (1-1/4” Spindle, 20”x28” top)
3 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 3 of 3
Raised Panel Guides &Ball Bearing Rub Collar
WEAVER
Sample Door - Crown
Raised Panel & Partial Under Raiser Heads & tips.
IPAGES-SY-3SS-3/4
NOTE: For Crown Raising, use only the infeed side of
the Fence
Page 4 of 4
Weaver Belt Power Feeder
Raised Panel Dust Shield
Power Feeder
Dust Shield
Panel Raising using the Raised Panel Hold Down
Item# Description SH1516 Shaper 5HP (1-1/4” Spindle, 20”x28”
top) FREIT15-001 Raised Panel Cutter Head 1-1/4”ID w/tips (3)
FREIT16-001 Partial Under Raiser Cutter Head with tips(3) FE275028
Partial Offset Raised Panel Guides 2-3/4” BB2246 Ball Bearing Rub
Collar HD3100 Raised Panel Hold Down PF721W Weaver Double Bond Belt
Power Feeder DS465 Raised Panel Dust Shield WD6086 Warning Disc
6-1/4”ODx1-1/4”ID
Shaper 3 of 3 Crown Panel
Raising
Shaper 3 of 3 Straight Panel
Raising
Shaper for Panel Raising Straight & Crown Setup (with Alloy
Insert Tip Raised Panel Cutters)
Note: In some of our pictures and illustrations the warning
discs, Dust
Shields, and some accessories have been removed for better
illustration of the
cutter and work.
-
18 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 18 - Copyright © 2018
all Rights Reserved
$19,995
GLASS MULLION CABINET DOOR 2 SHAPER SYSTEM
for the frame, divided light & grille mullions ...
SH1316 Shaper 3HP (1-1/4” Spindle 28” x 20” Top)
SH1316 Shaper 3HP (1-1/4” Spindle 28” x 20” Top)
WEAVER
Sticker Guide Fence
Fence in line with cutters Sticker Spring Guide
Placement Pins 28”
Steel Plate
HD360 Sticker Plate Setup
Placement Pins
Top & Bottom Shaper Wrenches - Warning Discs
Tenon Fence
Crown Rail Jig
2 Shaper Glass Mullions Cabinet Door System with Air Ten-on Jig,
Power Feeder, Cutters and accessories to produce square and crown
glass cabinet doors with mullions.
Sticking Setup For Frame & MullionsWeaver Belt
Power Feeder
TenonFence
DustShield Air Tenon
Fixture
ilBrazed Tip Stile & Ra-Set For Glass Doors
Rail Half
Brazed Tip Stile & Rail Set For Glass Doors - Stile Half
(Running3/8” materialfor Grilles)
Brazed Tip Stile & Rail Set For Glass Doors -
Stile Half
Weaver Variable Speed Belt Power Feeder
Crown Rail Patterns
Tenon Setup For Frame & Mullions
Dead Collar
-
May 2018 - 19
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 19 - Copyright © 2018
all Rights Reserved
Wood - Stile
Wood - Panel
MADE IN U.S.A.
With your Weaver System you now can offer elaborate custom
kitchen cabinetry . . . efficiently, out of any species of wood -
knowing that simply changing a pattern or
sticking spacer is all that’s needed.
6 SHAPER CABINET DOOR SYSTEMSIX SHAPER PNEUMATIC AND POWER FEED
CROWN RAISED PANEL DOOR SYSTEM Page 1 of 7
System Price 1 Phase: 3 Phase
$59,495$57,995
WEAVERManufactured
In U.S.A.
The system you receive will be preset by a craftsman and shipped
with samples, you can start producing shortly after your equipment
arrives.
With 2 Shapermaster Air Jigs, 2 Power Feeders, cutter sets,
fences, jigs and fixtures mounted, adjusted and ready to
produce!
Machine a Crown Raised Panel door in less than 3
minutes - A Square Raised Panel door in
less than 2 minutes.
02:52Minutes Seconds
With the Variable Speed Power Feeder, Jigs and Fixtures you can
make wide varieties and sizes of doors. Machine a raised panel
door
in less than 2 minutes!
Fast -
-
20 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 20 - Copyright © 2018
all Rights Reserved
Shaper for TenonItem# DescriptionSH1336 Shaper 3HP (1-1/4”
Spindle, 20”x28”top)SHIX38 Table GrooveFREPT-10-010-E01 1-1/4” Bore
Brazed Tip Rail Cutter Set w/EasementAJ1201RW Air Tenon JigFE27
Tenon Fence DS440 Dust Shield for Air Tenon WR620 Top WrenchWR6180
Bottom WrenchWD4166 Warning Disc 4-1/2”OD x 1-1/4”ID
Shaper Wrenches
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 1 of 6
TENONING
Note: In some of our pictures and illustrations the warning
discs, Dust Shields, and some accessories have been removed for
better illustration
of the cutter and work.
Tenon Fence
Warning Disc
Page 2 of 7
Dust Shield for Air Tenon
WEAVER
Tenoning Shaper
Air Tenon Jig - Travels in 3/4” x 3/8” groove
Alloy Braised Tip Rail Cutter
SH1336 Shaper 3HP (1-1/4” Spindle 20” x 28” Top)with Table
Groove
12” Ins
ide Ov
erall
-
May 2018 - 21
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 21 - Copyright © 2018
all Rights Reserved
Shaper for TenonItem# DescriptionSH1336 Shaper 3HP (1-1/4”
Spindle, 20”x28”top)SHIX38 Table GrooveFREPT-10-010-E01 1-1/4” Bore
Brazed Tip Rail Cutter Set w/EasementAJ1201RW Air Tenon JigFE27
Tenon Fence DS440 Dust Shield for Air Tenon WR620 Top WrenchWR6180
Bottom WrenchWD4166 Warning Disc 4-1/2”OD x 1-1/4”ID
Weaver Belt Power Feeder
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 2 of 6
STRAIGHT STICKING
Note: In some of our pictures and illustrations the warn-ing
discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Dust Shield for Straight Sticking
Page 3 of 7
Straight Sticking Shaper
WEAVER
Warning Disc
Sticker
Spring
Guide
Sticker
Guide
Fence
SH1336 Shaper 3HP (1-1/4” Spindle 20” x 28” Top)
Straight Stile & Rail StickingItem# Description SH1336
Shaper 3HP (1-1/4” Spindle, 20”x28”top)FREIT-10-010-PE 1-1/4” Bore
Stile Head with Insert Tips (3)FE211 Sticker Spring GuideFE213H
Sticker Guide Fence w/Hold DownPF721W Variable Speed double bond
belt FeederDS443 Dust Shield for Straight StilesWD4246 Warning Disc
4-3/4”ODx1-1/4”ID
Stile Head & Tips
Stile & Rail Edge
-
22 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 22 - Copyright © 2018
all Rights Reserved
Shaper for Straight Panel RaisingItem# DescriptionSH1536 Shaper
5HP (1-1/4” Spindle, 20”x28”top)FREIT15-001 Raised Panel Cutter
Head 1-1/4” Bore w/tips (3)FREIT16-001 Partial Under Raiser Cutter
Head with tips(3)FE2752801 Continuous Offset Raise Panel
GuideHD3100 Raised Panel Hold Down PF721W Variable Speed
double-bond belt FeederDS460 Dust Shield for Straight Raised
PanelWD6086 Warning Disc
Raised Panel Dust Shield
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 3 of 6
STRAIGHT PANEL RAISING
Note: In some of our pictures and illustrations the warn-ing
discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Warning Disc
Page 4 of 7
Straight Panel Fence
Straight Panel Raising Shaper
WEAVER
Weaver Belt Power Feeder
SH1536 Shaper 5HP (1-1/4” Spindle 20” x 28” Top)
Raised Panel Hold Down
Raised Panel & Partial Under Raiser Heads &
Tips
-
May 2018 - 23
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 23 - Copyright © 2018
all Rights Reserved
Shaper for Straight Panel RaisingItem# DescriptionSH1536 Shaper
5HP (1-1/4” Spindle, 20”x28”top)FREIT15-001 Raised Panel Cutter
Head 1-1/4” Bore w/tips (3)FREIT16-001 Partial Under Raiser Cutter
Head with tips(3)FE2752801 Continuous Offset Raise Panel
GuideHD3100 Raised Panel Hold Down PF721W Variable Speed
double-bond belt FeederDS460 Dust Shield for Straight Raised
PanelWD6086 Warning Disc
Shaper for Rail & Panel TrimmingItem# DescriptionSH2536
Shaper 5HP (1-1/4” Spindle, 28”x40”top)C9936V Stacked Rail &
Panel Trimming CutterDC312-308-22-3-1/2 - Double O.D. for
TrimmerFE77 Right Half of Split Fence w/Depth BoltDS470 Dust Shield
for Rail & Panel Trimming with ShapermastersWD4086 Warning Disc
- 4-1/ 4”ODx1-1/4”ID
Right Half of Split Fence (w/depth bolt)
Dust Shield for Shapermasters
Stacked Rail & Panel Trimming Cutter
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 4 of 6
PANEL & RAIL TRIMMING
Note: In some of our pictures and illustrations the warn-ing
discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Warning Disc
Page 5 of 7
Rail & Panel Trimming Shaper(Trimming panel shown.)
WEAVERSH2536 Shaper 5HP (1-1/4” Spindle 28” x 40” Top)
-
24 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 24 - Copyright © 2018
all Rights Reserved
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 5 of 6
SHAPING CROWN RAIL
Right Half of Split Fence
Plexiglass Patterns - Crown Rail
Page 6 of 7WEAVER
Warning Disc
Crown Rail Shaper
Shapermaster
24” Inside
Shaper for Crown Rail StickingItem# DescriptionSH2336 Shaper 3HP
(1-1/4” Spindle, 28”x40”top)FREIT-10-010-PE 1-1/4” Bore Stile Head
with Insert Tips (3)DC31630 Dead Collar for 4-3/4”WD 3-1/2”
ODx3-3/4” HeightAJ2402 Shapermaster 24” x 12”PA2417 Plexiglass
Patterns - 1-1/2” Crown Rail & PanelDS470 Dust Shield for
ShapermastersFE78 Right Half of Split FenceWD4246 Warning Disc
SH2336 Shaper 3HP (1-1/4” Spindle 28” x 40” Top)
Note: In some of our pictures and illustrations the warn-ing
discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Dust Shield for Shapermasters
Stile Head & Tips
Stile & Rail Edge
-
May 2018 - 25
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 25 - Copyright © 2018
all Rights Reserved
Shaper for Crown Panel RaisingItem# DescriptionSH2536 Shaper 5HP
(1-1/4” Spindle, 28”x40”top)FREIT15-001 Raised Panel Cutter Head
1-1/4” Bore w/tips (3)FREIT16-001 Partial Under Raiser Cutter Head
with tips (3)AJ2402 Shapermaster 24” x 12”
DC22422 Dead Collar for 6-1/4” WD - 2-3/4”ODx2-3/4”IDFE78 Right
Half of Split FenceDS470 Dust ShieldWD6086 Warning Disc - 6-1/4”
ODx1-1/4”ID
Note: In some of our pictures and illustrations the warn-ing
discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Right Half of Split Fence
Warning Disc
Dead Collar
Dust Shield for Shapermasters
WEAVER
Plexiglass Patterns - Crown Panel
Shapermaster
24” Inside
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 6 of 6
CROWN PANEL RAISING Page 7 of 7
SH2536 Shaper 5HP (1-1/4” Spindle 28” x 40” Top)
Crown Panel Shaper
Raised Panel & Partial Under Raiser Heads &
Tips
-
26 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 26 - Copyright © 2018
all Rights Reserved
Door Edge Dust Shield
General Hold Down
Table Groove
Manufactured In U.S.A.
Shaper-Large (1-1/4” Spindle 28” x 40” Top)
Dust shield For Door Edge
Note: In some of our pictures and illustrations the warning
discs, dust shields, and some accessories have been removed for
better illustration of the cutter and work.
SH2316 Shaper 3HP (1-1/4” Spindle 28” x 40” Top)with shaper top
groove.
Door Edge SetupItem# Description
SH2316 Shaper-Large 3HP(3/4” Spindle 28” x 40” Top)
SH2X39 Table GrooveFREPC17-110 Door Edge Top Cutter (Braised
Tip)FEDE2240-U Continuous Door Edge Fence - Slotted
HD3150 General Hold Down DS480 Dust Shield for Door Edge HD222
Drawer & Drawer Front Hold Down
WR620 Top WrenchWR6180 Bottom WrenchWD4166 Warning disc
System Total: $9,000
General Hold Down
Drawer & Drawer Front Hold Down
Continuous Door Edge Fence
DOOR EDGE SHAPER WEAVERManufactured
In U.S.A.
Fence
Top & Bottom Shaper Wrenches
- Warning Disc
-
May 2018 - 27
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 27 - Copyright © 2018
all Rights Reserved
DOOR EDGE SHAPERDrawer Ends Hold Down
Door Edge Dust Shield
Split Double Adjusting Fence
General Hold Down
Table Groove
Stock
WEAVERManufactured
In U.S.A.
Shaper-Large (1-1/4” Spindle 28” x 40” Top)
Door Edge Head - CCW FU & Door Edge Profile Tips
Split Door Edge Fence with Dual Adjustments
Drawer Ends Hold Down
General Hold DownDust Shield For
Door Edge
Note: In some of our pictures and illustrations the warning
discs,
Dust Shields, and some accesso-ries have been removed for better
illustration of the cutter and work.
Top & Bottom Shaper Wrenches
- Warning Disc
SH2316 Shaper 3HP (1-1/4” Spindle 28” x 40” Top)with shaper top
groove.
Door Edge SetupItem# Description
SH2316 Shaper-Large 3HP(1-1/4" Spindle 28" x 40" Top)
SH2X39 Table GrooveFE5640 Split Door Edge Fence w/Dual Adj.
HD3150 General Hold DownHD222 Drawer Ends Hold DownDS482 Dust
Shield for Door EdgeBYDE1RH Byrd Door Edge Head - CCW FU
with BYRD-1DERH Insert Tips (3)WR620 Top WrenchWR6180 Bottom
WrenchWD5086 Warning Disc
System Total: $9,050
-
28 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 28 - Copyright © 2018
all Rights Reserved
Door Edge Setup Item# Description SH2316 Shaper-Large 3HP
(1-1/4” Spindle 28” x 40” Top) SH2X39 Table Groove FE5640 Split
Door Edge Fence w/Dual Adj. HD3150 General Hold Down HD222 Drawer
Ends Hold Down DS460 Dust Shield for Door Edge BYRD-DERH Byrd Door
Edge Head - CCW FU BYRD-1DERH Byrd Door Edge Profile Tips (3) WR620
Top Wrench WR6180 Bottom Wrench WD5086 Warning Disc System Total
$3,691
Rip your stile and rail stock oversize approximately 1/16”. The
stile cutter will cut to exact size and shape the detail on edge.
The power feeder pushes the material and the spring loaded fence
guides the material against the outside fence and away from the
cutters. This set-up sizes your material, minimizes any bumps or
chatter marks in your material and avoids cutter burn marks. Make
different widths of stile or rail by only changing spacer
sticks.
STILE & RAIL STICKING
Shaker door sticking exploded view.
Your system will arrive with the shaper cutters on the shapers
already ad-justed. Accessories will be adjusted and most mounted to
the shapers. You can start producing shortly after the equipment
arrives. You can produce doors with one man or two men - and can
efficiently make 100 doors or make just one door without changing
setups.
This system uses two machines to make a shaker cabinet door,
usually consist-ing of two 3 HP shapers. Shaper One is setup for
tenoning the rails. Shaper Two is setup for running straight
stiles. Since the system is two separate shapers you will be able
to position them in your shop to maximize your shop’s produc-tion
needs.
2 SHAPER SHAKER CABINET DOOR FRAME SYSTEM How it WorksWEAVER
The tenon cut is made quickly and easily with this set up. The
Air Tenon Jig secures the rail with pneumatic clamp and glides on a
thin cushion of air making the operation effortless. To insure an
accurate tenon cut every time, the air Jig operates in a shaper top
groove in conJunec-tion with the Tenon Fence. (There is a backup
wood block to prevent chipping of wood.)
TENONING
Shaker door tenon exploded view.
A power feeder is included on the stile shaper. The Weaver
variable speed belt power feeder gives you the capability to run
short rails that are impossible with roller feeders - as well, they
improve the ease of the sticking operation.
The system you receive will be preset by a craftsman and shipped
to you with samples.
with Air Tenon Jig and Power Feeder
-
May 2018 - 29
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 29 - Copyright © 2018
all Rights Reserved
Item# Description
SH1316 Shaper 3HP 1 Phase(1-1/4” Spindle, 20”x28”top)
BY7LS-1-1/4” Bore Shaker Stile Cutter Head with tips (3) FE360H
Steel Sticker Plate w/Hold Down
PF721W Weaver Variable Speed Belt Power FeederDS452 Dust Shield
for Straight Stiles
WD4246 Warning Disc 4-3/4”ODx1-1/4”ID
System Total: $ 17,995
Shaper for Straight Stile & Rail Sticking
Weaver Belt
Power Feeder
This cabinet door shaper system is pre-setup and ready to
produce: it comes with two Weaver industrial shapers, air tenon
jig, power feeder, two Dust Shields, steel sticker plate setup,
tenon fence, the stile & rail cutters adjusted and setup on the
shapers. Plus a sample door made by the system.
Tenon Fence
Dust Shield for Tenon
Dust Shield for Straight
Sticking
Shaper 1-1/4” Spindle, 20”x28” top withTable Top Groove
Shaper 1-1/4” Spindle, 20”x28” top.
Shaker Stile Insert Heads & Tips
Shaker Rail Insert Heads & Tips
Cutters - setup, adjusted and mounted on the shapers.
2 SHAPER SHAKER CABINET DOOR SYSTEMWhat you Get WEAVER
Air Tenon JigTravels in 3/4” x 3/8” groove
(Shapers with 3 Phase 3 HP same price.)
Sample Door
(For optional cutter profiles, see cutter pages - also See
optional shaker panel raising shaper)
Top & Bottom Shaper Wrenches - Warning Discs
Shaper for Tenon
Item# Description
SH1316 Shaper 3HP 1 Phase (1-1/4” Spindle, 20”x28”top) SHIX38
Table Groove BY7LR-1-1/4” Bore Shaker Rail Cutter Head with tips
(3) AJ1201RW Air Tenon Jig FE5628 Split Tenon Fence DS441 Dust
Shield WR620 Top Wrench WR6180 Bottom Wrench WD4246 Warning Disc
4-3/4”OD x 1-1/4”ID
Univ. General Hold DownFence in line with
cutters
Placement Pins
28”
Steel Plate
Steel Sticker Setup
Sticker Spring Guide
Sticker Guide Fence
with Air Tenon Jig and Power Feeder
-
30 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 30 - Copyright © 2018
all Rights Reserved
The tenon cut is made quickly and easily with this set up. The
Manual Coping Hold Down has a quick action pressure bar that holds
the part as you squeeze the handles. There is a backup wood block
to minimize chipping of the wood. The Tenon Fence is a straight
fence running through the middle of the cutters providing a
positive guide to run your material against.
2 SHAPER SHAKER CABINET DOOR SYSTEM
Your system will arrive with the shaper cutters on the shapers
already ad-justed. All accessories will be adjusted and most
mounted to the shapers. You can start producing shortly after the
equipment arrives. You can produce doors with one man or two men -
and can efficiently make 100 doors or make just one door without
changing setups.
How it WorksWEAVER
Shaker door tenon exploded view.
Rip your stile and rail stock oversize approximately 1/16”. The
stile cutter will cut to exact size and shape the detail on edge.
The spring loaded fence guides the material against the outside
fence and away from the cutters. This set-up sizes your material,
minimizes any bumps or chatter marks in your material and avoids
cutter burn marks. Make different widths of stile or rail by only
changing spacer sticks.
Shaker door sticking exploded view.
Sticking
Tenoning
This system uses two machines to make the shaker cabinet door
frame, consist-ing of two 3 HP shapers. Shaper One is setup for
tenoning the rails. Shaper Two is setup for running straight
stiles.
The system you receive will be preset by a craftsman and shipped
to you with samples.
with Manual Hold Down
STILE & RAIL STICKING
TENONING
-
May 2018 - 31
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 31 - Copyright © 2018
all Rights Reserved
Item# Description SH1313 Shaper 3HP 1 Phase (3/4” Spindle,
20”x28”top) Stile Half of Shaker Set - - (FREMC50-500-501) FE363H
Steel Sticker Plate w/Hold Down DS450 Dust Shield for Straight
Stiles WD3163 Warning Disc 31/2”ODX 3/4”ID System Total:
----------$12,995
Tenon Jig - Travels in 3/4” x 3/8” groove
This Weaver shaker cabinet door shaper system is pre-setup and
ready to produce: it comes with two Weaver industrial shapers,
manual coping jig, Dust Shields, steel sticker plate setup, tenon
fence, the stile & rail cutters adjusted and setup on the
shapers. Plus a sample door made by the system.
Tenon Fence
Dust Shield for Tenon
Dust Shield for Straight
Sticking Top & Bottom Shaper Wrenches - Warning Discs
Shaper 3/4” Spindle, 20”x28” top with Table Top Groove
Shaper 3/4” Spindle, 20”x28” top
2 SHAPER SHAKER CABINET DOOR SYSTEMWhat you Get WEAVERCutters -
setup, adjusted and
mounted on the shapers.
Sample Door
PF721W Weaver Belt Power Feeder
The Weaver Power Feeder can be added which will feed the
material through and improve the quality and consistency of the
operation.
PF721W Weaver Variable Speed Belt Power Feeder $2,995
Add double bond belt Weaver Power Feeder:
(For optional cutter profiles, see cutter pages) (See optional
shaker panel raising shaper)
Rail Half of Shaker Stile & Rail Set 3/4” Bore
-
Stile Half of Shaker Stile & Rail Set 3/4” Bore
-
Shaper for Straight Stile & Rail Sticking
(Shaper with 3 Phase 3 HP same price.)
Shaper for Tenon
Item# Description
SH1313 Shaper 3HP 1 Phase (3/4” Spindle, 20”x28”top) SHIX38
Table Groove FREMC50-500-501 Rail Half of Shaker Set - 3/4” Bore
HD225 Tenon Jig FE25 Tenon Fence DS452 Dust Shield WR618 Top Wrench
WR6180 Bottom Wrench WD3163 Warning Disc 31/2”ODX 3/4”ID
Univ. General Hold DownFence in line with
cutters
Placement Pins
28”
Steel Plate
Steel Sticker Setup
Sticker Spring Guide
Sticker Guide Fence
with Manual Hold Down
-
32 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 32 - Copyright © 2018
all Rights Reserved
Shaker door sticking exploded view.
Shaker door tenon exploded view.
Rip your stile and rail stock oversize approximately 1/16”. The
stile cutter will cut to exact size and shape the detail on edge.
The spring loaded fence guides the material against the outside
fence and away from the cutters. This set-up sizes your material,
minimizes any bumps or chatter marks in your material and avoids
cutter burn marks. Make different widths of stile or rail by only
changing spacer sticks.
1 SHAPER SHAKER CABINET DOOR SYSTEM
How it WorksWEAVER
The system you receive will be preset by a craftsman and shipped
to you with samples.
Sticking
Tenoning
This system uses one 3 HP machine to make a shaker cabinet door.
Your system will arrive with either the tenon cutters or the
sticking cutters set-up on the shaper, and the other on a cutter
board holding dowel. Your Tenon Fence and Sticker Plate are lined
up to the proper position by index pins making them easy to line up
and bolt down. The need for spindle or cutter height adjustment is
eliminated by using tooling that lines up or a spacer system.
Coping
Hold Dow
n
Shaper
Tenon Fence
Warning Disc, CuttersDust
Shield
Top Groove for Tenon Jig
Steel Sticker Plate w/Hold Down
Stock
Tenon/Rail
Stile/Sticking
Cutter setups - spaced and shimmed, ready to load on shaper
The tenon cut is made quickly and easily with this set up. The
Manual Coping Hold Down has a quick action pressure bar that holds
the part as you squeeze the handles as you push the rail though the
cutters. There is a backup wood block to minimize chipping of the
wood. The Tenon Fence is a straight fence running through the
middle of the cutters providing a positive guide to run your
material against.
STILE & RAIL STICKING
TENONING
-
May 2018 - 33
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 33 - Copyright © 2018
all Rights Reserved
This Weaver shaker cabinet door shaper system is pre-setup and
ready to produce: it comes with a Weaver industrial shaper, manual
coping jig, Dust Shield, steel sticker plate setup, tenon fence,
the stile & rail cutters adjusted and ready to setup on the
shapers. Plus a sample door made by the system.
Dust Shield for Tenon/Straight
Sticking
Top & Bottom Shaper Wrenches - Warning Discs
Sample Door
Tenon Jig - Travels in 3/4” x 3/8” groove
Tenoning Accesories Item# Description FREMC50-500-501 Rail Half
of Shaker Set - 3/4” Bore HD225W Tenon Jig FE25 Tenon Fence WD3163
Warning Disc 31/2”OD x 3/4”ID
1 SHAPER SHAKER CABINET DOOR FRAME SYSTEMWhat you Get WEAVER
Rail Half of Shaker Stile & Rail Set 3/4” Bore
Stile Half of Shaker Stile & Rail Set 3/4” Bore
-
Tenon Fence
(Shaper with 3 Phase 3 HP same price.)
Cutters - setup, adjusted and ready to mount on the shapers.
The Weaver Power Feeder can be added which will feed the
material through and improve the quality and consistency of the
operation.
Add Weaver Belt Power Feeder:
PF721W Weaver Variable Speed Belt Power Feeder $ 2,995
General Hold DownFence in line with
cutters
Placement Pins
28”
Steel Plate
Steel Sticker Setup
Sticker Spring Guide
Sticker Guide Fence
Shaper 3/4” Spindle, 20”x28” top w/Table Top Groove
Shaper for Tenon & Sticking Item# Description
SH1313 Shaper 3HP 1 Phase (3/4” Spindle, 20”x28”top) SHIX38
Table Groove DS433 Dust Shield WR618 Top Wrench (for 3/4” Spindle)
WR6180 Bottom Wrench
Straight Stile & Rail Sticking AccessoriesItem#
Description
FREMC50-500-501 Stile Half of Shaker Set - 3/4” BoreFE363H Steel
Sticker Plate SetupWD3163 Warning Disc 31/2”OD x 3/4”ID
1 Shaper System for Shaker Cabinet Door Frame: $ 7,695
-
34 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 34 - Copyright © 2018
all Rights Reserved
Shaker Straight Panel Raising Shaper How it WorksWEAVER
Shaker door exploded view backside with ‘partial raised’
panel.
This system uses a 3 HP machine to shape a shaker partial back
raised panel. Your system will arrive with the cutter already on
the shaper and adjusted.
The accessories will be adjusted, and mounted to the shaper. You
can start producing shortly after the equipment arrives.
Panels are produced efficiently with this setup. The Raised
Panel Hold Down has a polished steel hoop that is spring tensioned
to put pressure down on the panel. The raised panel guide provides
a positive guide to run your panel against.
SHAKER PARTIAL BACK PANEL RAISING
Sample Shaker Panel
Partial Back for Shaker Flat Panel
The system you receive will be preset by a craftsman and shipped
to you with samples.
Shaker door corner backside view with
‘partial raised’ panel.
-
May 2018 - 35
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 35 - Copyright © 2018
all Rights Reserved
The Weaver Power Feeder can be added which will push the
material through and improve the quality and consistency of the
operation.
Shaker Straight Panel Raising Shaper
Raised Panel Hold Down
Top & Bottom Shaper Wrenches -
Warning Discs
Raised Panel Dust ShieldStraight Panel Fence
What you Get WEAVER
This Weaver shaker panel raising shaper system is pre-setup and
ready to produce: it comes with a Weaver industrial shaper, raised
panel hold down, raised panel guide - shaker partial back panel
raiser cutter adjusted and setup on the shaper, assembled and
mounted along with the sample panel made by the system.
Cutters - setup and adjusted on the shaper.
Shaper for Straight Panel Raising
Fence or Bearing
(Shaper with 3 Phase 3 HP same price.)
Shaper 1-1/4” Spindle, 20”x28” top.
PF721W Weaver Variable Speed Belt Power Feeder $ 2,995
Add Weaver Belt Power Feeder:
For 5 HP 1 Phase, add
$400
Partial Raiser - Car-bide 1-1/4” Bore
Item# Description
SH1316 Shaper 3HP 1 Phase(1-1/4” Spindle, 20”x28”top)
FREPC16-001R Partial Raiser - Carbide 1-1/4” BoreFE27528
Continuous Raised Panel GuideHD3100 Raised Panel Hold Down
DS460 Dust Shield for Straight Raised PanelWD6086 Warning
Disc
WR620 Shaper Wrench - TopWR6180 Shaper Wrench - Bottom
System Total: $ 6,495
A Weaver Power Feeder can be added
Horse Power / Phase Options
-
36 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th
Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 36 - Copyright © 2018
all Rights Reserved
Panel RaisersPanel Trimming
Tenon/Rail
Stile
Wood - Stile
Wood - Panel
1 SHAPER CROWN RAISED PANEL
Power Feeder
Coping Hold Down
Shaper
Tenon Fence
Dust Shield
Top Groove for Tenon Jig
Sticking Spacer Board
Top & Bottom Shaper Wrenches - Warning Discs
Tenon Setup Item# Description SH1516 Shaper 5HP (1-1/4” Spindle,
20”x28” top) SHIX38 Table Groove WD4246 Warning Disc
FREPC10-010-501-E 1-1/4” Bore Quarter Rd. Stile & Rail Cutter
Set 1/4” x 1/2�