We ensure that only the highest quality systems and materials

Head office and Manufacturing Facility

Unit A, B & C

16 Waggie Road

Blackheath

Cape TownPostal Address:

PO Box 1552

Milnerton

7435

E-mail:[email protected]

Website:www.panelman.co.za

Tel:+27 21 9052233/5 or +27 21 9059386 Fax:+27 0866137924

We ensure that only the highest quality systems and materials

are used in the manufacturing process to comply with environmental and international standards.

Specialised Panel Manufacturing is owned, managed and run by

motivated and energy driven individuals with many years of

experience in

the cold room and cold storage industries.

We are always ready to assist and advise customers

from the planning stages through to the completed project.

Specialised Panel Manufacturing has experienced project managers

who oversees each project and ensures that it is delivered according

to specification. Our fully experienced installers ensures a quality

product is delivered to the client.

We have supplied numerous installations throughout South Africa

and into most sub-Saharan African countries.

Specialised Panel Manufacturing is one of a very few or probably

the only black owned business in the industry. Our LEVEL ONE

status show cases our representation of Africa 's demographics and

continues it's commitment of skills development and uplifting

individuals whom have been in the industry for so many years but

was never recognized.

Our approach and motto towards business has been and always will be as follows;

a one on one interaction with our clients

respect towards others

integrity

loyalty

honesty

Our intention and goal is to provide you (our loyal clients) with service excellence and a

quality product

With a sophisticated panel manufacturing machine which roll forms to a unique tongue and groove

joint which is then laminated using an industrial polyurethane adhesive to either a polystyrene,

rockwool or polyurethane inner core. A range of FRP, IBR, Chromadeck, Stainless Steel and

Aluminium panels are manufactured by us

Panel thickness and lengths are manufactured in accordance with room temperature required and

clients specification. Building on from our original business philosophy of producing only the finest

quality service, a firm commitment was made to extend this quality right through to the

manufactured products which meets exacting international standards and specification from the

sourcing of raw materials and die cast aluminium sections.

“modular panel”

Our modular panel width is 1190mm wide and 1100mm wide IBR

roof profile that could be laminated to various thicknesses and

density of core materials.

Panel Thickness Guide

Operating Temperature Suggested Insulation

Range (EPS)

5ºC to 0ºC 75mm to 100mm

0ºC to -5ºC 100mm to 125mm

-5ºC to -10ºC 125mm to 150mm

-10ºC to -20ºC 150mm to 200mm

-20ºC to -30ºC 200mm to 250mm

-30ºC to -40ºC 250mm to 300mm

COLD ROOMS

The insulated modular panels are widely used in areas that require

temperature control. They are used in the food and beverage

industry, such as restaurants, hotels, meat/fish and chicken

processing facilities and distribution centers.

Different thicknesses of panels are manufactured for the cold room

industry, depending on the needs of the client and the temperature

required for the facility.

The thickness of panels for cold rooms may vary from 75mm

through to 100mm and 125mm with a polystyrene inner core.

Freezer rooms use panels with a thickness of 150mm and 200mm.

the inner core consist of expanded polystyrene.

Different dimensions of cold rooms are available, depending on the

client's specification or the space available for the room.

Due to the unique sectional manufacturing process cold rooms can

easily be extended as your business grows.

PRE-FABRICATED MODULAR BUILDINGS

Our insulated pre-fabricated modular system is a quick and cost

effective method of construction.

Some types of buildings where insulated panels can be used are

classrooms, office units, churches, mobile kitchens, community

phone shops, low cost housing, clinics, computer rooms and kiosks.

pre-fabricated modular units can be manufactured/built on steel

frames or concrete slab.

This system allows for quick and easy installation and also has

excellent insulation properties.

INSULATED CONTAINERS

With our insulated panel system, we are able to speedily and cost-

effectively manufacture insulated containers for:

BTS (Base Transceiver Stations) used by the cellular

industries

Spaza shops and community services phone shops

ATM and internet cafes

Soup kitchens

Security booths

Kiosks

Mobile toilets

Mobile laboratories

Our containers can be delivered countrywide and also available in

kit form (crated) for the export market.

SPECIALISED PRODUCTS

Our insulated modular panel system is suitable for a range of

specialized applications such as;

Insulated trailers

Ice boxes

Trailer vending units

Vending kiosks

Mobile ablution units

ADVANTAGES

Some of the advantages of our insulated modular panel system:

Durability

Aesthetically pleasing appearance

Exceptionally low maintenance

Ease and speed of installation

No specialized skill required for the installation

Excellent insulation properties

Easily transported in kit form

Lower costs and less wastage of materials

DOORS

We offer a range of doors

o personnel access/ fire rated hinged doors

o hinged and sliding doors with airtight seals, heavy

duty hardware and the necessary safety features.

o each individually tailor made to meet clients

requirements.

o glass doors (single or combinations with or without

shelves)

We also offer as an option, PVC strip curtains.

FLOORS

Floors can be made up of standard sandwiched panels with either an aluminium

checker plate or galvanized sheet finish.

Where heavy and continuous wear is anticipated (pallet jacks/ hysters) the floor will

consist of a layer of 24 density polystyrene insulation laid on a layer of 250 micron

damp proof course (vapor barrier) covered with a layer of concrete.

Clients have the option of installing the freezer floor with or without a heater mat.

Chicken Houses

The chicken houses range from different specs. The client need to give us a drawings from

there architect and we work according to their drawing.

Certain countries/provinces has to get the local municipality approval before construction

can begin.

Just a rough example: 22 – 30 chickens into 1 sq metre.

Normally we build 120 x 14,5 metres which houses 30 000 chickens.

We supply all water- points and electrical points.

On projects outside South African borders we do train locals how to build our pre fabricated

buildings. All houses come with water and electrical points!

House Plan- 3 beroom

Dormitry for Defence Force

House Plan 3 bedroom

[email protected]

Eben Pieters

www.panelman.co.za