Physical Address 1509 Riverport Road Kingsport, TN 37660 Physical Address 400 Natalie Boulevard Loudon, TN 37774 Kingsport TN: 423-765-9991 | Loudon TN: 865-458-2333 FOR QUESTIONS OR TO REQUEST A QUOTE, VISIT WWW.PROCESSSUPPLY.COM OR CALL WE ARE AVAILABLE 24/7
65
Embed
WE ARE AVAILABLE 24/7...BALL VALVES 2-PIECE BRONZE Standard Port BA-100 / BA-100S 600 WOG 150 SWP, MSS SP-110, Threaded, BA-100S with Stainless Steel Ball and Stem 1/4" thru 3" BA-100ELD
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
BA-350 / BA-350S600 WOG, 150 SWP, MSS SP-110, Solder, BA-350S with Stainless Steel Ball and Stem3/8" thru 3"
BA-300 P2 / BA-300S P2200 psig @ 250°F, MSS SP-110, Press X Press, BA-300S P2 with Stainless Steel Ball and Stem1/2" thru 2"
BA-350TE / BA-350STE **600 WOG, 150 SWP, Solder, BA-350STE with Stainless Steel Ball and Stem, Tube End1/2" thru 3"
* Meets Senate law S3874. Tested and certified by IAPMO R & T to NSF/ANSI 61 and NSF/ANSI 372 for “lead-free” compliance.** Available in various configurations such as gauge ports and oxygen cleaning for medical gas services
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
20/22 Series Ball Valve Milwaukee Valve Company 20CC/CS/SS and 22CC/CS/SS
2 Piece Standard Port NPT Ball Valve
Features and Benefits • Locking lever for safety lockout• Multiple V-ring stem packing arrangement for longer packing life• Vent hole in ball slot for cavity venting• Mounting pad for easy actuation• PTFE body seal/except on 22 series• NACE Compliant for sour gas service• Blow-out proof stem• Cantilever seat design for low operating torque• 22 series offers sealed welded body to tailpiece construction• Meets latest ASME, MSS-SP and ASTM specifications
Operators Available • Locking lever handle and ovals• Pneumatic and Electric Actuation
Materials of Construction • WCB Carbon steel or CF8M Stainless Steel• Ball: 316 Stainless• Stem: 316 Stainless• Seats: Teflon®-75 (M-PTFE)• Packing: PTFE/Graphite• Handles: Stainless Steel/Carbon Steel
Specifications Pressure Ratings: • Valves Sizes 1/4” through 2.0”
1/4” through 1” 2000 psi • Meets MSS-SP-110
1-1/4” through 2.0” 1500 PSI • Valves meet NACE MRO175
How To Order Milwaukee Valve 20 Series Two Piece Ball Valve
20CSOR-N1-LL 34 (3/4" Two Piece Adaptor Loaded Reduced Port Carbon Steel Body, Stainless Trim, Female NPT End Pieces, NXT. Seats, SS Latch-Lock Handle,)20CSOR-N1-LL-VB 34 (3/4" Two Piece Adaptor Loaded Reduced Port Carbon Steel Body, Stainless Trim, Female NPT End Pieces, NXT. Seats, SS Latch-Lock Handle, Vented Ball)
Example Product Numbers
Milwaukee Valve ConfidentialMTV 20 SERIES PRODUCT MATRIX.xls 7/26/06 Page 1
C - Carbon Steel
VALVE SIZE
MAXIMUM BREAKAWAY
TORQUE (in lbs.)Cv
1/4 - 3/8 20 6.81/2 40 9.83/4 50 25
1 100 351 - 1/4 140 471 - 1/2 190 81
2 240 105
20/22 Series Ball Valve Milwaukee Valve Company 20CC/CS/SS and 22CC/CS/SS
2 Piece Standard Port NPT Ball Valve
Features and Benefits • Locking lever for safety lockout• Multiple V-ring stem packing arrangement for longer packing life• Vent hole in ball slot for cavity venting• Mounting pad for easy actuation• PTFE body seal/except on 22 series• NACE Compliant for sour gas service• Blow-out proof stem• Cantilever seat design for low operating torque• 22 series offers sealed welded body to tailpiece construction• Meets latest ASME, MSS-SP and ASTM specifications
Operators Available • Locking lever handle and ovals• Pneumatic and Electric Actuation
Materials of Construction • WCB Carbon steel or CF8M Stainless Steel• Ball: 316 Stainless• Stem: 316 Stainless• Seats: Teflon®-75 (M-PTFE)• Packing: PTFE/Graphite• Handles: Stainless Steel/Carbon Steel
Specifications Pressure Ratings: • Valves Sizes 1/4” through 2.0”
1/4” through 1” 2000 psi • Meets MSS-SP-110
1-1/4” through 2.0” 1500 PSI • Valves meet NACE MRO175
Pressure Ratings:1/4" through 1"1-1/4" through 2"Valve is rated 150 psi steam @ 365°F
Tefl on is a registered trademark of Dupont.
Rev 3
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
20CC/CS/SS and 22CC/CS/SSNPT Ball Valve
Material List
Material ListItem Description 20/22/SS 20/22/CC 20/22/CS
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Tefl on is a registered trademark of Dupont.
30 Series Ball ValveMilwaukee Valve Company30CC/CS/SS
3 Piece Full Port Ball Valve
Features and Benefits • Locking lever for safety lockout • Multiple V-ring stem packing arrangement
for longer packing life • Vent hold in ball slot for cavity venting • Mounting pad for easy actuation • TFE/Graphite Body Seal • NACE Compliant for sour gas service • Blow-out proof stem • Cantilever seat design for low operating torque • Meets ASME, MSS-SP and ASTM specifictions
Operators Available • Locking lever handle and ovals • Pneumatic and Electric Actuation
30CSOF-02-LL - 34 (3/4" Three Piece Full Port Carbon Steel Body, Stainless Trim, Female NPT End Pieces, RPTFE Seats, SS Latch-Lock Handle)30CSOF-02-LL-VB - 34 (3/4" Three Piece Full Port Carbon Steel Body, Stainless Trim, Female NPT End Pieces, RPTFE Seats, SS Latch-Lock Handle,Vented Ball)
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
* These dimensions apply only to socket-weld end valves.
L
N = NUMBER OF ACTUATOR MOUNTING PADS HOLES
M
MATERIAL LIST
Rev 0918
35 Series Ball Valve Milwaukee Valve Company 35RSS/35RCS AND 35FSS/35FCS 3 Piece Enclosed Bolt Fire-Safe Full & Standard Port Ball Valve Features and Benefits
• Locking lever for safety lockout • Live-loaded adjustable stem packing arrangement
for longer packing life • Vent hole in ball slot for cavity venting • Standard grounded ball and stem • ISO 5211 mounting pad for easy actuation • Flexible graphite body seals • NACE Compliant for sour gas service • Blow-out proof stem • Fire-safe to API 607 6th Ed • Cantilever seat design for low operating torques • Meets the latest: API, ASTM/ASME standards
Product Range • Full and Standard port available • Socket weld and NPT connections • Size Range 1/4”-2.0”
Operators Available • Locking lever and oval handle • Pneumatic and Electric Actuation
Materials of Construction • Carbon Steel or CF8M Stainless Steel • Ball: 316 Stainless • Stem: 316 Stainless • Seats: NXT 75/M-PTFE • Seat options: Multi-Fill, PEEK • Packing: Graphite/PTFE
Specifications
• Valves Sizes 1/4” through 2” • Meets MSS-SP-110 • Meets ASME B16.34 design • Valves meet API 608 • Valves meet API 607 6th Ed for Fire safe testing • Valves tested to API 598 and MSS SP-72 • Valves meet NACE MRO175
Milwaukee Valve Company16550 West Stratton DriveNew Berlin, WI 53151Phone 262 432 2800Fax 262 432 2701
Milwaukee Valve 35 Series Top Level Matrix
Revision B
Series Port Size Body Material Ball / Stem Material End Piece Configuration Seat Material External Options Internal Options SizeXXXXXXXXXXXXXXX
How To Order Milwaukee Valve 35 Series Three Piece Enclosed Bolt Ball Valve
35RCS02LL -034 (3/4" Standard Port Carbon Steel Body, Stainless Trim, Female NPT End Pieces, Gls. Fld Seats, SS Latch-Lock Handle,)35FSS13LL -100 (1" Full Port Stainless Steel Body, Stainless Trim, Socket Weld End Pieces, Multi-Fill PTFE Seats, SS Latch-Lock Handle,)35RSS02LLV -034 (3/4" Standard Port Stainless Steel Body, Stainless Trim, Female NPT End Pieces, Gls. Fld Seats, SS Latch-Lock Handle, Vented Ball)
35 Series Ball Valve Milwaukee Valve Company 35RSS/35RCS AND 35FSS/35FCS 3 Piece Enclosed Bolt Fire-Safe Full & Standard Port Ball Valve Features and Benefits
• Locking lever for safety lockout • Live-loaded adjustable stem packing arrangement
for longer packing life • Vent hole in ball slot for cavity venting • Standard grounded ball and stem • ISO 5211 mounting pad for easy actuation • Flexible graphite body seals • NACE Compliant for sour gas service • Blow-out proof stem • Fire-safe to API 607 6th Ed • Cantilever seat design for low operating torques • Meets the latest: API, ASTM/ASME standards
Product Range • Full and Standard port available • Socket weld and NPT connections • Size Range 1/4”-2.0”
Operators Available • Locking lever and oval handle • Pneumatic and Electric Actuation
Materials of Construction • Carbon Steel or CF8M Stainless Steel • Ball: 316 Stainless • Stem: 316 Stainless • Seats: NXT 75/M-PTFE • Seat options: Multi-Fill, PEEK • Packing: Graphite/PTFE
Specifications
• Valves Sizes 1/4” through 2” • Meets MSS-SP-110 • Meets ASME B16.34 design • Valves meet API 608 • Valves meet API 607 6th Ed for Fire safe testing • Valves tested to API 598 and MSS SP-72 • Valves meet NACE MRO175
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Rev 0918
35RSS/35RCS 1/4” to 2” and 35FSS/35FCS 1/2” to 1-1/2”
ITEM DESCRIPTION MATERIAL
1 BODY MACHINED CS ASTM A216 GR WCBSS ASTM A351 GR CF8M
3 END CAP MACHINED CS ASTM A216 GR WCBSS ASTM A351 GR CF8M
10 STEM PACKING GRAPHITE11 BODY SEAL FLEXIBLE GRAPHITE12 STEM NUT ASTM A194 GR8 TYPE 30413 DISC SPRING ASTM A276 TYPE 30414 HANDLE ASSY 304 SS
15 COLLAR, NUT RETAINING ASTM A276 TYPE 304
16 LOCK WASHER ASTM A276 TYPE 30417 BOLT,SHCS ASTM A193-BB TYPE 30418 STOP PIN ASTM A276 TYPE 304
Size Units A B (Port) C D E F G (NPT) G1 (SW) G2 (SW) H J K L
1/2Inches
mm1.35 34.2
.57 14.5
1.98 50.2
1.44 50.2
1.37 34.8
2.74 69.6
1/4"-18NPT.87
22.00.38 9.6
2.62 66.6
2.15 54.7
1.42 36.0
4.21 107.0
3/4Inches
mm1.88 47.7
.81 20.6
2.23 56.7
1.61 41.0
1.59 40.4
3.19 81.0
3/4"-14NPT1.07 27.3
0.5 12.7
3.18 80.7
2.59 65.9
1.65 42.0
5.00 127.0
1 Inches
mm1.88 47.7
.98 24.9
2.58 65.5
1.84 46.8
1.87 47.5
3.74 95.0
1.0"-11 1/2NPT1.34 34.0
0.5 12.7
3.35 85.1
2.96 75.1
1.61 41.0
6.02 152.9
1 1/4 Inches
mm2.25 57.0
1.25 31.8
3.23 82.0
2.07 52.6
2.13 54.1
4.26 108.2
1 1/4"-11 1/2NPT1.69 42.9
0.5 12.7
3.77 95.8
3.41 86.6
1.97 50.0
7.80 198.1
1 1/2Inches
mm2.69 68.2
1.50 38.1
3.51 89.2
2.33 59.1
2.52 64.0
5.04 128.0
1 1/2"-11 1/2NPT1.92 48.9
0.5 12.7
4.00 101.5
4.14 105.1
1.97 50.0
7.80 198.1
Size Units A B (Port) C D E F G (NPT) G1 (SW) G2 (SW) H J K L
1/4Inches
mm1.17 29.6
.43 11.0
1.83 46.4
1.28 32.5
1.36 34.5
2.72 69.0
1/4"-18NPT.57
14.40.38 9.6
2.45 62.1
1.91 48.4
1.42 36.0
4.21 107.0
3/8Inches
mm1.17 29.6
.43 11.0
1.83 46.4
1.28 32.5
1.36 34.5
2.72 69.0
3/8"-18NPT.70
17.80.38 9.6
2.45 62.1
1.91 48.4
1.42 36.0
4.21 107.0
1/2Inches
mm1.35 34.2
.57 14.5
1.98 50.2
1.44 36.5
1.37 34.8
2.74 69.6
1/2"-18NPT.87
22.00.38 9.6
2.59 65.8
2.15 54.7
1.42 36.0
4.21 107.0
3/4Inches
mm1.55 39.5
.57 14.5
1.93 49.0
1.44 36.5
1.45 36.9
2.90 73.7
3/4"-14NPT1.07 27.3
0.5 12.7
2.59 65.8
2.15 54.7
1.42 36.0
4.21 107.0
1Inches
mm1.88 47.7
.81 20.6
2.25 57.0
1.61 41.0
1.59 40.4
3.19 81.0
1.0"-11 1/2NPT1.34 34.0
0.5 12.7
3.14 79.7
2.59 65.9
1.65 42.0
5.00 127.0
1 1/4Inches
mm2.25 57.0
.98 24.9
2.58 65.5
1.84 46.8
1.87 47.5
3.74 95.0
1 1/4"-11 1/2NPT1.69 42.8
0.5 12.7
3.31 84.1
2.96 75.1
1.61 41.0
6.02 152.9
1 1/2Inches
mm2.58 65.5
1.25 31.8
3.23 82.0
2.07 52.6
2.13 54.1
4.26 108.2
1 1/2"-11 1/2NPT1.93 48.9
0.5 12.7
3.71 94.3
3.41 86.6
1.97 50.0
7.80 187.1
2Inches
mm3.18 80.8
1.50 38.1
3.51 89.2
2.33 59.1
2.52 64.0
5.04 128.0
2.0"-11 1/2NPT2.42 61.5
0.6 15.2
3.97 100.8
4.14 105.1
1.97 50.0
7.80 198.1
Full Port
For 2" Full Port dimension see next page
The 1/4, 3/8, 1/2 Valves are full port
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Rev 0918
35FSS/35FCS 2”
Size Units A B (Port) C D E F G (NPT) G1 (SW) G2 (SW) H K L
2 Inches
mm5.20
132.02.00 50.8
4.34 110.3
3.11 79.0
2.81 71.5
5.63 143.0
2.0"-11 1/2NPT2.42 61.5
0.6 15.2
5.44 138.2
5.20 132.0
11.54 293.0
Full Port
LAIRETAMNOITPIRCSEDMETI
1 BODY MACHINED SS ASTM A351 GR CF8MCS ASTM A216 GR WCB
2 END CAP MACHINED SS ASTM A351 GR CF8MCS ASTM A216 GR WCB
3 BALL STAINLESS STEEL ASTM A351 GR CF8M4 STEM ASTM A479 TYPE 316
NXT 75/M-PTFETAES56 THRUST WASHER NXT 75/M-PTFE7 FOLLOWER ASTM A479 TYPE 3168 STEM PACKING GRAPHITE9 BODY SEAL FLEXIBLE GRAPHITE
10 STEM NUT ASTM A194 GR8 TYPE 30411 DISC SPRING ASTM A479 TYPE 304
SS 403YSSA ELDNAH2113 LOCK TAB ASTM A276 TYPE 30414 LOCK WASHER ASTM A582 TYPE 30315 BOLT,SHCS ASTM A193-B8 TYPE 30416 STOP PIN ASTM A276 TYPE 30417 SEAT SHEATH ASTM A479 TYPE 316
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Rev 0918
41SS/41CS SERIES BALL VALVESMilwaukee Valve CompanyFull Port Seal-Welded Fire-Safe Ball Valve
Rev 09/18
IN EVERY VALVE
Features and Benefi ts • Locking lever for safety lockout• V-ring stem packing arrangement for longer packing life • Vented ball in ball slot for cavity venting• Four bolt actuator mounting pad for easy actuation• Blow-out proof stem design• Extended ends allow welding in line w/o disassembly • Optional Seat materials offer 3000 psig (Peek/Delrin)• Meets API, ASTM, ASME and MSS standards
Materials of Construction• Body: Carbon Steel or CF8M Stainless Steel • Ball: 316 Stainless• Stem: 316 Stainless• Seats: PTFE, RPTFE, Multi Filled,
Peek, Delrin• Packing: Graphite or PTFE
Operators Available• Locking lever handle, Oval handles, Stem Extension • Pneumatic and Electric Actuation
Example Product Numbers: 41SS0F-02-LL-100 - (1” 41 Series Stainless Steel Body, 316 Stainless Ball and Stem, Full Port, Reinforced PTFE seats, Stainless Latch-Lock Handle)
Torque Ratings and CVValve SizeFull Port
Maximum Breakaway Torque (in lbs.) Cv.
1/4-1/2 60 9.8
3/4 110 35
1 130 47
1-1/4 260 81
1-1/2 330 105
2 550 330
41 Series
Specifi cations• ASME/ANSI Class 900 • Meets ASME B16.34 design• Valves meet API 608 • Valves meet API 607 4th edition for fi re safe testing• Valves tested to API 598 and MSS SP-72• Valve is rated 150 steam @ 365 degrees F with
RPTFE Seats • Valves meet NACE MRO175• End Connections: Threaded/Socket-Weld/Ext.
Butt-Weld Ends • Size Range 1/4”-2”
How To Order Milwaukee Valve 41 Series Seal Welded 2 Piece Ball ValveSeries Body
MaterialBall / Stem Material
End Piece Confi guration
Port Size
Seat Material External Options Internal Options
Size
XX X X X X X XX XX XXX
41 C - Carbon Steel (WCB)S - Stainless Steel (CF8M)
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
41SS/41CS SERIES BALL VALVESMaterial List
Part 41SS 41CS
1. BodyStainless SteelASTM A351/A744 CF3M
Carbon SteelASTM-A216 GR, WCB
2. TailpieceStainless SteelASTM A351/A744CF3M
Carbon SteelASTM-A216 GR, WCB
3. Ball Seal Reinforced PTFE 15% Glass Filled
Reinforced PTFE 15% Glass Filled
4. Body/ Tailpiece Seal
PTFE PTFE
5. Ball Stainless SteelASTM A276, Type 316
Stainless SteelASTM A276, Type 316
6. Stem Stainless SteelASTM A276, Type 316
Stainless SteelASTM A276, Type 316
7. Handle Nut
Stainless Steel18-8 Commercial
Stainles Steel18-8 Commercial
8. Gland Stainless STeelASTM A276, Type 316
Stainless Steel ASTM A276, Type 316
9. Packing Graphite Graphite
10. Thrust Washer
Reinforced PTFE25% Glass Filled
Reinforced PTFE25% Glass Filled
11. Handle-Oval
Carbon Steel1010 Commercial
Carbon Steel1010 Commercial
11A. Handle-Latch-Lock
Stainless Steel Stainless Steel
12. Lockwasher Stainless Steel Stainless Steel
Dimensions ChartFull Port A B C D D1 E E1 F F1 G G1 H H1 J J1 K L P R S
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
34F20CS/F20SS Class 150/300 8" - 12"
Features & BenefitsF20CS/F20SS Class 150/300 1" - 3"F20CS/F20SS Class 150/300 4" - 6"
IndexF20 Series Ball Valve
12
34F20CS/F20SS Class 150/300 8" - 12"
Features & BenefitsF20CS/F20SS Class 150/300 1" - 3"F20CS/F20SS Class 150/300 4" - 6"
IndexF20 Series Ball Valve
12
Rev. 09/18
MILWAUKEE VALVE
1
F20 Series Ball ValveMilwaukee Valve CompanyF20CS/F20SS CLASS 150/300
2 Piece Full Port Flanged Ball Valve
Features and Benefits • Locking lever for safety lockout • Live loaded packing for extended service• Vented ball in ball slot for cavity venting • Standard grounded ball and stem • ISO 5211 mounting pad for easy actuation • Spiral wound graphite and stainless body seal • NACE compliant fasteners for sour gas service • Blow-out proof stem • Fire-safe to API 607 6th edition latest revision • Pressure relieving seat design • Meets all of the latest: API, ASTM/ASME
standards
Operators Available • Locking Lever Handle • Gear operated • Pneumatic and Electric Actuation
Materials of Construction • Carbon steel or CF8M Stainless Steel • Ball: 316 Stainless • Stem: 316 Body: WCB Stainless • Seats: Reinforced PTFE/or NXT (M-PTFE) • Packing: Graphite
Specification• Valve Sizes 1” thru 12” * • ASME/ANSI Class 150/300 • B.16.34 design • API 608 design • API 607 Firesafe 6th edition • API 598, MSS SP-72 • NACE MR0175
Pressure Ratings: Class 150 Class 300 Carbon Steel 285 psi 740 psi Stainless Steel 275 psi 720 psi
Valve is rated 150 steam @ 365 degrees F.
0
100
200
300
400
500
600
700
800
0 100 200 300 400 500 600
Pres
sure
PSI
G
Temperature Degrees Fahrenheit
Pressure/Temperature Chart
PEEKSEAT
Milwaukee Valve Company16550 West Stratton DriveNew Berlin, WI 53151Phone 262 432 2800Fax 262 432 2701
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
2
Material ListItem Qty. Description F20 Class 150/300
SS ATSM A351 GR CF8MCS ASTM A216 GR WCB
2 1 Ball SS ASTM A351 GR CF8M3 1 Stem ASTM A479 Type 316
CS ASTM A216 GR WCBSS ASTM A351 GR CF8M
NXT M-PTFE03-MULTI FILLED/TFE/GRAPHITE
02-RPTFE6 1 Thrust Washer7 3 Graphite Packing Graphite8 1 Packing Gland ASTM A479 Type 3169 1 Body Seal ASTM A240 TY 304 & Graphite
10 1 Handle Assy Stainless Steel10.1 1 Handle ASTM A276 Type 30410.2 1 Latch ASTM A276 Type 30411 1 Lock Tab ASTM A276 Type 30412 4 Body Stud ASTM A194 GR8 Type 30413 4 Body Stud Nut ASTM A193 GR B8 Type 30414 2 Belleville Washer ASTM A276 Type 30415 1 Lock Washer ASTM A582 Type 30316 2 Stem Nut ASTM A194 GR8 Type 30417 2 Packing End Ring Graphite18 2 Stop Pin ASTM A276 Type 304
Body
Tail Pieces
Seat Materials
11
4 1
5 2
NXT M-PTFE
Class 150 # DimensionsSize Dim. A B C D E F G H J (B.C.) K (BORE) L (QTY) M N
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
3
Material ListItem Qty. Description F20 Class 150/300
Stainless Steel A351 GR CF8MCS ASTM A216 GR WCB
2 1 Ball SS ASTM A351 GR CF8M3 1 Stem ASTM A479 Type 316
SS ASTM A351 GR CF8MCS ASTM A216 GR WCB
NXT M-PTFE03-MULTI FILLED/TFE/GRAPHITE
02-RPTFE6 1 Thrust Washer7 4 Graphite Packing Graphite8 1 Packing Gland ASTM A479 Type 3169 1 Body Seal ASTM A240 TY 304 & Graphite
10 1 Handle Assy Ductile Iron ASTM A536 GR. 65-45-1211 1 Snap Ring ASTM A276 Type 30412 8 Body Stud ASTM A193 GR B8 Type 30413 8 Body Stud Nut ASTM A194 GR 8 Type 30414 1 Lock Washer ASTM A582 Type 30315 2 Gland Bolt ASTM A193 GR B8 Type 30416 1 Stop SS ASTM A240 TY30417 2 Packing End Ring Graphite18 1 Packing Plate SS ASTM A351 GR CF8M19 1 Stem Nut ASTM A194 GR8 Type 30420 4 Belleville Washer ASTM A276 Type 304
Body
Tail pieces
Seat Materials
1 1
4 1
5 2
NXT M-PTFE
Class 150 # DimensionsSize Dim. A B C D E F G H J (B.C.) K BORE L (QTY) M N
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
4
Material list003/051 ssalC 02FnoitpircseDytQmetI
1 1 BODY STAINLESS STEEL A351 GR CF8MCARBON STEEL ASTM A216 GR WCB
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
0
100
200
300
400
500
600
700
800
0 100 200 300 400 500 600
Pres
sure
PSI
G
Temperature Degrees Fahrenheit
Pressure/Temperature Chart
PEEKSEAT
Pressure Ratings: Class 150 Class 300Carbon Steel 285 psi 740 psiStainless Steel 275 psi 720 psi
Milwaukee Valve Company16550 West Stratton DriveNew Berlin, WI 53151Phone 262 432 2800Fax 262 432 2701
Milwaukee Valve F20 Top Level Matrix
Revision C
Valve Series Body Material Ball/Stem Material End Connection Port Size Seat Material External Options Internal Options SizeXXX X X XXX X XX XXX XX XXX
F90/91 SERIES Ball Valve Milwaukee Valve Company F90/91CS/SS Class 150/300 Unibody Standard Port Flanged Ball Valve
Features and Benefits
• Locking lever for safety lockout • 2 bolt adjustable stem packing arrangement for longer packing life • Vented ball in ball slot for cavity venting • Optional grounded ball and stem • Four bolt actuator mounting pad for easy actuation • NACE Compliant for sour gas service • Blow-out proof stem design • Fire-safe to API 607 (F91) • Pressure relieving seat design • Meets API, ASTM, ASME and MSS standards
Operators Available
• Locking lever handle, Oval handle, Gear operated • Pneumatic and Electric Actuation
Materials of Construction
• Body: Carbon steel or CF8M Stainless Steel • Ball: 316 Stainless • Stem: 316 Stainless • Seats: STD (NXT-75) or ME-PTFE • Packing: Graphite or PTFE
Specifications
• Valves Sizes 1/2” through 6” • ASME/ANSI Class 150/300 • Meets ASME B16.34 design • Valves meet API 608 • Valves meet API 607 for Fire safe testing (F91) • Valves tested to API 598 and MSS SP-72 Valve is rated 150 steam @ 365 degrees F • Valves meet NACE MRO175
F90/91 SERIES Ball Valve Milwaukee Valve Company F90/91CS/SS Class 150/300 Unibody Standard Port Flanged Ball Valve
Features and Benefits
• Locking lever for safety lockout • 2 bolt adjustable stem packing arrangement for longer packing life • Vented ball in ball slot for cavity venting • Optional grounded ball and stem • Four bolt actuator mounting pad for easy actuation • NACE Compliant for sour gas service • Blow-out proof stem design • Fire-safe to API 607 (F91) • Pressure relieving seat design • Meets API, ASTM, ASME and MSS standards
Operators Available
• Locking lever handle, Oval handle, Gear operated • Pneumatic and Electric Actuation
Materials of Construction
• Body: Carbon steel or CF8M Stainless Steel • Ball: 316 Stainless • Stem: 316 Stainless • Seats: STD (NXT-75) or ME-PTFE • Packing: Graphite or PTFE
Specifications
• Valves Sizes 1/2” through 6” • ASME/ANSI Class 150/300 • Meets ASME B16.34 design • Valves meet API 608 • Valves meet API 607 for Fire safe testing (F91) • Valves tested to API 598 and MSS SP-72 Valve is rated 150 steam @ 365 degrees F • Valves meet NACE MRO175
Valve Size
Class 150(0-300 PSID)
Recommended Actuator Torque
(in. lbs. Nm)
Class 150(0-300 PSID)
Recommended Actuator Torque
(in. lbs. Nm)
Class 300 (301-740 PSID) Recommended
Actuator Torque
(in. lbs. Nm)
Cv Valve Size
Class 300 (301-740 PSID) Recommended
Actuator Torque
(in. lbs. Nm)
Cv
1/240 4.5
40 4.5
15 2240 27.1
300 33.9
120
3/460 6.8
60 6.8
25 3500 56.6
750 84.8
460
1125 14.1
125 14.1
37 4900
101.81000 113.1
640
1 1/2190 21.5
190 21.5
90 61900 214.9
3525 398.8
1025
Class 150(0-300 PSID)
Recommended Actuator Torque
(in. lbs. Nm)
Class 150(0-300 PSID)
Recommended Actuator Torque
(in. lbs. Nm)
TORQUE & CV VALUES
Rev 09/18
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
NIN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM
ANSI 150 LB. - DIMENSIONS - INCHES AND MILLIMETERS (90/91 - SERIES BALL VALVES)
ANSI 300 LB. - DIMENSIONS - INCHES AND MILLIMETERS (90/91 - SERIES BALL VALVES)
SIZEA B C D E F G H J K L M
Rev 09/18
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BRONZE AND BRASS BALL VALVES INDEX
BA-100/100S BV-1
BA-100/100S P2 BV-2
BA-100ELD/ BA100SELD BV-3
BA-100H/BA-150H BV-4
BA-100SH/BA150SH BV-5
BA-100H/BA100SH P1 BV-6
BA-100M BV-7
BA-100-TS BV-8
BA-150/150S BV-9
BA-200 BV-10
BA-250 BV-11
BA-300/300S BV-12
BA-300/300S P2 BV-13
BA-300SB/300SBS BV-14
BA-350/350S BV-15
BA-350TE/350STE BV-16
BA-350TE-G/350STE-G BV-17
BA-400/400S BV-18
BA-400/400S P2 BV-19
BA-400S3 BV-20
BA-450/450S BV-21
BA-475B BV-22
BA-485B BV-23
BA-500/550 BV-24
BA-480B BV-25
BA-480S BV-26
BA-480BH BV-27
BA-480SH BV-28
BA-481B BV-29
BA-481S BV-30
BA-490B BV-31
BA-490S BV-32
BA-491B BV-33
BA-491S BV-34
Insulator Handle/MS (TIH) BV-35 - 36
Options BA-100/150/300/350/400/450 BV-37
Options BA-200/250/475B/485B/480B/490B BV-38
Rev 09/18
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-1
*Not intended for use in potable water.MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
(1) Milwaukee Valve Company recommends the use of Stainless steel ball and stem for steam applications. Please consult factory for more information. (2) Stem is stainless for BA-100S and 2-1/2”–3” BA-100
Standard Port (1”-3”) Full Port (1/4”-3/4”)600 WOG/150 SWP (1)
Threaded EndsBlow-Out Proof Stem
MSS SP-110
BA-100/100S* ¼”-3”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-2Rev. 4
*Not intended for use in potable water.
Bronze Ball ValveTwo Piece
Standard Port (1”-3”) Full Port (1/2”-3/4”)200 psig @ 250°F†Press x Press Ends
Press x Threaded Ends Available (Consult Factory)Blow-Out Proof Stem
Conforms to MSS SP-110
BA-100/100S* P2 ½”-3”
/ 2BRONZE BALL VALVETWO-PIECE, FULL-PORT (1/4”-3/4”) STANDARD PORT (1”-2”)200 PSIG @ 250°FPRESS ENDSBLOW-OUT PROOF STEM
AD
E
2
34
567
8
910
11
DIMENSIONS
BA-100 400S* P2 12 -" "
1
MSS SP-110
O P E N600W
OG
150S
WP
MILW
AU
KE
EVA
LVE
CO
MPA
NY,IN
CR
(1) For steam service specify see BA400S3
690
1380
2070
2760
4140
3450
4830
GNIKROW
ERUSSERP- p
is
WORKING TEMPERATURE - F
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438
Seat Material Rating
93
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
Copper (2 1/2” - 3”) B8813 O-Ring EPDM14 Backing Seal Acetal15 Backing Ring 304 Stainless Steel A276
(1) Ball and stem are stainless for BA100S P2
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-3
E
12
10
9
F
OPEN125 WO
G
LIM
WE
EK
UA
VL
AE
VP
MO
CY
NA
,C
NIR
Note: Handle is shown in theopen position. Ball is shownclosed to illustrate vent feature.
Standard Port (1”-2”) Full Port (1/4”-3/4”)Safety ExhaustLocking Handle
Blow-Out Proof StemMSS SP-110
BA-100ELD/BA-100SELD* ¼”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
NOTE: Pressure / Temperature ratings shown are for valve only. Hose side pressure and temperature limit is based on connected hose and is the users responsibility.
Do not pressurize cap.Pressure not to exceed 40 psi.
690
1380
2070
2760
4140
3450
GNIKROW
ERUSSERP- p
is
WORKING TEMPERATURE - F
PRESSURE - TEMPERATURE DATA
100
200
300
400
600
500
0 50 150 200 250 300 350 400100
GNIKRO
WERUSSERP
-pKa
10WORKING TEMPERATURE - C
66 121 149 177 20438
Seat Material RatingJoint Limits fromANSI B16.18 for 95/5 Solder
93
450
232
(See Note)
BA100HA_REV10.PDF 10/9/2008 9:35:02 AM
BA100HA_REV10.PDF 1 3/4/14 9:22 AM
Rev. 17
*Not intended for use in potable water.
Bronze Ball ValveTwo Piece Full Port
Threaded x 3/4” Hose End (BA100H)Solder x 3/4” Hose End (BA150H)
Dust Cap and ChainBlow-Out Proof Stem
MSS SP-110
BA-100H/150H* ½”-¾”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
NOTE: Pressure / Temperature ratings shown are for valve only. Hose side pressure and temperature limit is based on connected hose and is the users responsibility.
Do not pressurize cap.Pressure not to exceed 40 psi.
690
1380
2070
2760
4140
3450
GNIKROW
ERUSSERP- p
is
WORKING TEMPERATURE - F
PRESSURE - TEMPERATURE DATA
100
200
300
400
600
500
0 50 150 200 250 300 350 400100
GNIKRO
WERUSSERP
-pKa
10WORKING TEMPERATURE - C
66 121 149 177 20438
Seat Material RatingJoint Limits fromANSI B16.18 for 95/5 Solder
93
450
232
(See Note)
BA100HA_REV10.PDF 10/9/2008 9:35:02 AM
BA100HA_REV10.PDF 1 3/4/14 9:22 AM
*Not intended for use in potable water.
Bronze Ball ValveTwo Piece • Full Port
Threaded x 3/4” Hose End (BA100SH)Solder x 3/4” Hose End (BA150SH)
Dust Cap and ChainBlow-Out Proof Stem
MSS SP-110
BA-100SH/150SH* ½”-¾”
Rev. 2
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-6
B
Press End Adapter (4151 Series)
15
Do not pressurize cap.Pressure not to exceed 40 psi.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Standard Port (1”-2”) Full Port (1/4”-3/4”)600 WOG/150 SWP*
FNPT x MNPT ConnectionsBlow-Out Proof Stem
MSS SP-110
BA-100-M* ¼”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Standard Port (1”-2”) Full Port (1/2”-3/4”)600 WOG
Threaded x Solder EndsBlow-Out Proof Stem
MSS SP-110
BA-100-TS* ½”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
(1) Stem is stainless for BA-150S and 2-1/2”–3” BA-150.
505
270
485
395
210
325
175
0
100
200
300
400
500
600
700
0 50 100 150 200 250
PRESSURE
psig
TEMPERATURE, Degrees FSolder Joint And Service As Per ANSI B16.18
PRESSURE VS TEMP. (based on 95/5 solder)
3/8 thru 1"
1 1/4 thru 2"
2 1/2 thru 4"
600
4” Only
B
A
F
D
C
E
2
910
11
1
57
34
6
8
O P E N600W
OG
150S
WP
MILW
AU
KE
EVA
LVE
CO
MPA
NY,IN
CR
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
B
A
F
D
C
E
2
910
11
1
57
34
6
8
O P E N600W
OG
150S
WP
MILW
AU
KE
EVA
LVE
CO
MPA
NY,IN
CR
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
Rev. 18
*Not intended for use in potable water.
Bronze Ball ValveTwo Piece
Standard Port (1”-3”) Full Port (3/8”-3/4”)600 WOG
Solder EndsBlow-Out Proof Stem
MSS SP-110
BA-150/150S* ⅜”-3”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-10
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Brass,Forged B2832 Tailpiece Brass,Forged B283
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
100
200
300
400
500
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438 93
Seat Material Rating
232
1
4 3
2
58
7 10
6
D
A
F
9
BC
ER
LIM
WE
EK
UA
VL
AE
VP
MO
CY
NA
004
GO
W
Rev. 16
*Not intended for use in potable water.
Brass Ball ValveTwo Piece
Standard Port (1/2”-4”) Full Port (1/4”-3/8”)400 WOG
Threaded EndsBlow-Out Proof Stem
MSS SP-110
BA-200* ¼”-4”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-11
690
1380
2070
2760
3450
p-ERUSSERP
GNIKROW
is
WORKING TEMPERATURE - F
100
200
300
400
500
0 50 150 200 250 300 350 400 450100
aPK-ERUSSERP
GNIKRO
W
Body / Seat Material Rating
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
10WORKING TEMPERATURE - C
66 121 149 177 20438 93 232
BC
1
43
2
5
8
7 10
6
D
E
A
F
9
R
PM
OC
EVL
AVE
EK
UA
WLI
MY
NA
004
GO
W
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Brass,Forged B2832 Tailpiece Brass,Forged B283
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-12
PRESSURE and TEMPERATURE CHART
690
1380
2070
2760
4140
3450
4830
GNIKROW
ERUSSERP- p
is
WORKING TEMPERATURE - F
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438 93 232
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.
Saturated Steam Limit
(1) Milwaukee Valve Company recommends the use
(2) Ball and stem are stainless for 300S.
of Stainless Steel ball and stem for steamapplications. Please consult factory for moreinformation.
(1) Milwaukee Valve Company recommends the use of Stainless Steel ball and stem for steam applications. Please consult factory for more information. (2) Ball and stem are stainless for 300S
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Press x Threaded Ends Available (Consult Factory)Blow-Out Proof Stem
Conforms to MSS SP-110
BA-300/300S* P2 ½”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
(1) Milwaukee Valve Company recommends the use of Stainless Steel ball and stem for steam applications. Please consult factory for more information. (2) Ball and stem are stainless for 300SBS
** Pressure temperature charts contain valve seat and body ratings for standard valves using normal solder installation techniques. Solder end valves are de-rated by the lim-itations of the joint as specified in ASME 16.18. Brazing installations can have the same effect on the valve rating. Consult ASME 16.18 and the American Welding Society for the actual joint ratings of the material being used for the specific application.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-15
MATERIALS LISTITEM PART MODEL/SIZE MATERIALS ASTM SPEC.
Cv 7 17 31 60 110 185 360 390 390*3” is standard Port. **2-1/2” & 3” Only.
Rev. 13
*Not intended for use in potable water.
Bronze Ball ValveThree Piece
Full Port600 WOG
Solder EndsBlow-Out Proof Stem
MSS SP-110
BA-350/350S* ⅜”-3”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-16
MATERIALS LISTITEM PART MODEL/SIZE MATERIALS ASTM SPEC.
1 Body BA350 & 350S Bronze B5842 Sil. Braised Stub, Male BA350 & 350S Bronze, Copper Tube
Cv 17 31 60 110 185 360 390 390Note: DN (Diameter Nominal) = Metric equivalent size. * Designed for soft solder or brazed installation without disassembly.
** Pressure temperature charts contain valve seat (1) Ball and stem are stainless for 350STE and body ratings for standard valves. Solder end valves are de-rated by the limitations of the joint as specified in ASME 16.18. Brazing installations can be likewise derated. Consult ASME 16.18 and the American Weld-ing Society for the actual joint ratings of the material being used for the specific application. Pressure and Temperature ratings may be further derated in accordance with the pressure rating associated with the type of copper tube used for the stub end. Call the factory for accurate application data.
Available Options• Male Tube Ends - Type “K” (Standard)• Female Tube Ends - Type “L” (-F)• Cleaned For Oxygen Service In Accordance
With NFPA 99C (-OC)• Stainless-Steel Ball And Stem (-S)• Stainless-Steel Locking Lever (-LD)• Oval Handle (-OH)• Oval Locking Handle (-LO)• Stem Extension (-XH)• Stainless-Steel Lever Handle (-SH)• Gauge Ports
Rev. 8
*Not intended for use in potable water.
Bronze Ball ValveThree Piece
Full Port600 WOG
Extended Tube EndsInline Repairable
Blow-Out Proof StemMSS SP-110
BA-350TE/350STE* ½”-3”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-17
Available Options• Male Tube Ends - Type “K” (Standard)• Female Tube Ends - Type “L” (-F)• Cleaned For Oxygen Service In Accordance
With NFPA 99C (-OC)• Stainless-Steel Ball And Stem (-S)• Stainless-Steel Locking Lever (-LD)• Oval Handle (-OH)• Oval Locking Handle (-LO)• Stem Extension (-XH)• Stainless-Steel Lever Handle (-SH)
* Designed for soft solder or brazed installationwithout disassembly.
Pressure temperature charts contain valve seatand body ratings for standard valves. Solderend valves are de-rated by the limitations of thejoint as specified in ASME 16.18. Brazinginstallations can be likewise derated. ConsultASME 16.18 and the American Welding Societyfor the actual joint ratings of the material beingused for the specific application.Pressure and Temperature ratings may befurther derated in accordance with the pressurerating associated with the type of copper tubeUsed for the stub end. Call the factory foraccurate application data.
1/2”-2”
Available Options.* Male Tube Ends-Type “K” (Standard)* Female Tube Ends-Type “L” (-F)* Cleaned For Oxygen Service
Accordance With NFPA 99 (-OC)* Stainless Steel Ball And Stem (-S)
The information presented on this sheet is correct at the time of publication. Milwaukee Valve Company reserves the right to changedesign, and/or material specifications without notice. For the most current information access www.milwaukeevalve.com
* Designed for soft solder or brazed installationwithout disassembly.
Pressure temperature charts contain valve seatand body ratings for standard valves. Solderend valves are de-rated by the limitations of thejoint as specified in ASME 16.18. Brazinginstallations can be likewise derated. ConsultASME 16.18 and the American Welding Societyfor the actual joint ratings of the material beingused for the specific application.Pressure and Temperature ratings may befurther derated in accordance with the pressurerating associated with the type of copper tubeUsed for the stub end. Call the factory foraccurate application data.
1/2”-2”
Available Options.* Male Tube Ends-Type “K” (Standard)* Female Tube Ends-Type “L” (-F)* Cleaned For Oxygen Service
Accordance With NFPA 99 (-OC)* Stainless Steel Ball And Stem (-S)
The information presented on this sheet is correct at the time of publication. Milwaukee Valve Company reserves the right to changedesign, and/or material specifications without notice. For the most current information access www.milwaukeevalve.com
** Pressure temperature charts contain valve seat (1) Ball and stem are stainless for 350STE and body ratings for standard valves. Solder end valves are de-rated by the limitations of the joint as specified in ASME 16.18. Brazing installations can be likewise derated. Consult ASME 16.18 and the American Weld-ing Society for the actual joint ratings of the material being used for the specific application. Pressure and Temperature ratings may be further derated in accordance with the pressure rating associated with the type of copper tube used for the stub end. Call the factory for accurate application data.
Extended Tube Ends with 1/8” NPT Gauge PortInline Repairable
Blow-Out Proof StemMSS SP-110
BA-350TE-G/350STE-G* ½”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-18
690
1380
2070
2760
4140
3450
4830
WOR
KING
PRES
SURE
sip-
100
200
300
400
600
500
700
Saturated Steam
WORKING TEMPERATURE - F0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438
Seat Material Rating
93
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.PRESSURE - TEMPERATURE DATA
505
270
485
395
210
0
100
200
300
400
500
600
700
0 50 100 150 200 250
PRESSURE
psig
PRESSURE VS TEMP. (based on 95/5 solder)
3/8 thru 1"
1 1/4 thru 2"
600
TEMPERATURE, Degrees FSolder Joint And Service As Per ANSI B16.18
Rev. 12
*Not intended for use in potable water.
Bronze Ball ValveTwo Piece
Full Port 600 WOG
Solder EndsBlow-Out Proof Stem
MSS SP-110
BA-450/450S* ⅜”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-22
BRASS BALL VALVE***
967
4
10
3
5
2
1
8 11
D
E
A
F
"BA-475B" 14 -"/ 4 "
RC US
UL 842UL 125ANSI Z 21.15a CGA 9.1a
ASME B16.44
R
690
1380
2070
2760
4140
3450
4830
GNIKROW
ERUSSERPp-
si
WORKING TEMPERATURE - F
PRESSURE - TEMPERATURE CHART
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
GNIKRO
WERUSSERP
-aPK
10WORKING TEMPERATURE - C
66 121 149 177 20438 93
CB
Seat Material Rating
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Brass, Forged B2832 Tailpiece Brass, Forged B283
*Also Available BA-475B-LL (Locks only in closed position)** Not Suitable For Ammonia Service***Not intended for use in potable water.****4” Valve Only
Brass Ball ValveTwo Piece
Full Port600 WOG (1/4”-3”) 400 WOG (4”)
Threaded EndsBlow-Out Proof Stem
MSS SP-110, ASME A112.4.14
“BA-475B”* ¼”-4”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-23
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Brass, Forged B2832 Tailpiece Brass, Forged B283
TEMPERATURE, Degrees FSolder Joint And Service As Per ANSI B16.18
PRESSURE VS TEMP. (based on 95/5 solder)
3/8 thru 1"
1 1/4 thru 2"
2 1/2 thru 4"
600
4” Only
Rev. 26
Brass Ball ValveTwo Piece
Full Port600 WOG (1/2”-3”) 400 WOG (4”)
Solder EndsBlow-Out Proof Stem
MSS SP-110, ASME A112.4.14
“BA-485B”* ½”-4”
*Not intended for use in potable water.**4” Valve Only
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-24
E - SWT
E - THD
E - SWT
E - THD
MATERIALS LISTITEM PART MATERIALS ASTM SPEC.
1 Body Brass, Forged B2832 Tailpiece Brass, Forged B283
Sold In Packages of 2Kit Includes 4 Bolts & Nuts, Plus T-Handle (1)
Blow-Out Proof StemMSS SP-110, ASME A112.4.14
BA-500/BA-550* ¾”-1¼”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
13** Backing Ring EPDM Commercial14** Gripping Ring Stainless Steel Commercial* Ultra Press Valves are designed and qualified for use in copper tubing systems only, Types K, L, & M per ASTM B88.
** For Installation Instructions please see engineering section on website.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
* Ultra Press Valves are designed and qualified for use in copper tubing systems only, Types K, L, & M per ASTM B88.
DIMENSIONS
UNITS1/2”DN15
3/4”DN20
AINCHES 0.51 0.76mm 13 19
BINCHES 3.06 3.50mm 78 90
CINCHES 1.41 1.66mm 36 42
DINCHES 1.62 2.01mm 41 51
EINCHES 3.15 4.33mm 80 110
F-TUBE DIA
INCHES 0.82 0.99mm 21 25
Cv 18 40NOTE: Pressure / Temperature ratings shown are for valve only. Hose side pressure and temperature limit is based on connected hose and is the users responsibility.
Do not pressurize cap.Pressure not to exceed 40 psi.
Rev. 9
*Not intended for use in potable water.
Brass Ball ValveTwo Piece
Full Port 200 psig @ 250°F†Press x Hose Ends
Blow-Out Proof Stem
BA-480BH* ½”-¾”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
* Ultra Press Valves are designed and qualified for use in copper tubing systems only, Types K, L, & M per ASTM B88.
DIMENSIONS
UNITS1/2”DN15
3/4”DN20
A-PORT DIA
INCHES 0.51 0.76mm 13 19
BINCHES 3.06 3.50mm 78 90
CINCHES 1.41 1.66mm 36 42
DINCHES 1.62 2.01mm 41 51
EINCHES 3.15 4.33mm 80 110
F-TUBE DIA
INCHES 0.82 0.99mm 21 25
Cv 18 40NOTE: Pressure / Temperature ratings shown are for valve only. Hose side pressure and temperature limit is based on connected hose and is the users responsibility.
Do not pressurize cap.Pressure not to exceed 40 psi.
Rev. 10
*Not intended for use in potable water.
Brass Ball ValveTwo Piece
Full Port 200 psig @ 250°F†Press x Hose Ends
Blow-Out Proof Stem
BA-480SH* ½”-¾”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
With Extension Stem & Memory StopBlow-Out Proof Stem
BA-481B* ½”-3”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
With Extension Stem & Memory StopBlow-Out Proof Stem
BA-481S* ½”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Press x Threaded EndsWith Extension Stem & Memory Stop
Blow-Out Proof Stem
BA-491B* ½”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
Press x Threaded EndsWith Extension Stem & Memory Stop
Blow-Out Proof Stem
BA-491S* ½”-2”
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-35MILWAUKEE VALVE
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to changedesign, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see theengineering section on our website. For the most current information access www.milwaukeevalve.com
NEW BERLIN, WI 53151-7301MILWAUKEE VALVE CO., INC.
DWN
CHKD
APVD
MDLD
REG APVL
TITLE
SHEET
in [mm]PRIMARY / SECONDARY
UNITS
THIS PRINT IS THE PROPERTY OF MILWAUKEE VALVE COMPANY, INC. AND REPRESENTS A PROPIETARY ARTICLE IN WHICH MILWAUKEE VALVE COMPANY, INC. RETAINS ANY
AND ALL PATENTS AND OTHER RIGHTS, INCLUDING EXCLUSIVE RIGHTS OF USE AND/OR MANUFACTURE AND/OR SALE. POSSESION OF THIS PRINT DOES NOT CONVEY ANY
PERMISSION TO REPRODUCE PRINT OR MANUFACTURE THE ARTICLE OR ARTICLES SHOWN THEREIN; SUCH PERMISSION
TO BE GRANTED ONLY BY SPECIFIC AUTHORIZATION IN WRITING, SIGNED BY AN OFFICER OR OTHER AUTHORIZED
QTY. DESCRIPTION MATERIAL1 HOUSING FIRE RESISTANT ABS1 SLEEVE FIRE RESISTANT ABS1 CAP POLYETHYLENE1 INSULATION INSERT POLYSTYRENE1 SHIELD PLASTIC SLEEVE1 LOCK WASHER SS1 STOP PLATE & SCREWS SS1 MEMORY STOP ASSEMBLY SS
Bill of Material
R27752
To order factory assembled to the valve use suffix TIH (Threaded Only) Milwaukee Valve will not factory install (TIH) handle on solder end valves.*Will fit our equivalent Ultrapure Low Lead Valves.
Milwaukee Valve’s insulated extension handle is designed to prevent condensation and other extraneous moisture from entering your insulated piping system, while also minimizing thermal energy loss from the system via metal extension tubes, levers, and similar parts.
Our handle design incorporates a unique memory stop feature that requires no disassembly or removal of the handle to engage and make adjustments.
Rev. 7
Rev. 8
MILWAUKEE VALVE
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to changedesign, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see theengineering section on our website. For the most current information access www.milwaukeevalve.com
NEW BERLIN, WI 53151-7301MILWAUKEE VALVE CO., INC.
DWN
CHKD
APVD
MDLD
REG APVL
TITLE
SHEET
in [mm]PRIMARY / SECONDARY
UNITS
THIS PRINT IS THE PROPERTY OF MILWAUKEE VALVE COMPANY, INC. AND REPRESENTS A PROPIETARY ARTICLE IN WHICH MILWAUKEE VALVE COMPANY, INC. RETAINS ANY
AND ALL PATENTS AND OTHER RIGHTS, INCLUDING EXCLUSIVE RIGHTS OF USE AND/OR MANUFACTURE AND/OR SALE. POSSESION OF THIS PRINT DOES NOT CONVEY ANY
PERMISSION TO REPRODUCE PRINT OR MANUFACTURE THE ARTICLE OR ARTICLES SHOWN THEREIN; SUCH PERMISSION
TO BE GRANTED ONLY BY SPECIFIC AUTHORIZATION IN WRITING, SIGNED BY AN OFFICER OR OTHER AUTHORIZED
QTY. DESCRIPTION MATERIAL1 HOUSING FIRE RESISTANT ABS1 SLEEVE FIRE RESISTANT ABS1 CAP POLYETHYLENE1 INSULATION INSERT POLYSTYRENE1 SHIELD PLASTIC SLEEVE1 LOCK WASHER SS1 STOP PLATE & SCREWS SS1 MEMORY STOP ASSEMBLY SS
Bill of Material
R27752
To order factory assembled to the valve use suffix TIH (Threaded Only) Milwaukee Valve will not factory install (TIH) handle on solder end valves.*Will fit our equivalent Ultrapure Low Lead Valves.
Milwaukee Valve’s insulated extension handle is designed to prevent condensation and other extraneous moisture from entering your insulated piping system, while also minimizing thermal energy loss from the system via metal extension tubes, levers, and similar parts.
Our handle design incorporates a unique memory stop feature that requires no disassembly or removal of the handle to engage and make adjustments.
Rev. 7
Bronze & Brass Ball Valves
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-36MILWAUKEE VALVE
The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to changedesign, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see theengineering section on our website. For the most current information access www.milwaukeevalve.com
HOUSINGAND PLASTIC
SHIELD
CAP
INSULATION INSERT
INNER HOUSING WITHCALIBRATED MEMORY STOP
WASHER
MEMORY SET SCREWS C
M
Y
CM
MY
CY
CMY
K
Isolation Handle Assembly Instructions.pdf 1 10/29/14 11:20 AM
Rev. 2
*
* To order factory assembled to the valve use suffix TIH (Threaded Only) Milwaukee Valve will not factory install (TIH) handle on solder end valves.
Rev. 3
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-37
OPTIONS
LockingOvalHandle
ChainLever
TeeHandle
H
L
W
Milwaukee offers two styles of oval handles,standard oval and a padlocking oval design.
Oval handles are intended for several differentapplications, they can be installed where a standard leverhandle might encounter interference from adjoining piping.Oval handles can also prevent accidental valveoperations, since they have less projection than a leverhandle, and require more turning force to operate. OSHArequires the use of oval handles in many installations forsafety reasons. The locking handle design willaccommodate a standard 5/16” pad-lock or other types ofvalve lockouts. The standard ovalhandle can be field or factory mountedon BA100/300/400 series valves up to2”, and the locking oval handlecan be used on sizes up to 1”.
Chain lever handle kits are designedfor installations where overheadball valves need to be operatedon a regular basis. A lengthof chain is attached to eitherend of the handle, so that theoperator needs only to pull down on the appropriatechain to open or close the valve.
L
H
L
Tee handles offer the sameinstallation space savings as oval
handles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.
OH & LO
OvalHandle
L
W
H
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
BA100/150BA300/350BA400/450
OPTIONS
LockingOvalHandle
ChainLever
TeeHandle
H
L
W
Milwaukee offers two styles of oval handles,standard oval and a padlocking oval design.
Oval handles are intended for several differentapplications, they can be installed where a standard leverhandle might encounter interference from adjoining piping.Oval handles can also prevent accidental valveoperations, since they have less projection than a leverhandle, and require more turning force to operate. OSHArequires the use of oval handles in many installations forsafety reasons. The locking handle design willaccommodate a standard 5/16” pad-lock or other types ofvalve lockouts. The standard ovalhandle can be field or factory mountedon BA100/300/400 series valves up to2”, and the locking oval handlecan be used on sizes up to 1”.
Chain lever handle kits are designedfor installations where overheadball valves need to be operatedon a regular basis. A lengthof chain is attached to eitherend of the handle, so that theoperator needs only to pull down on the appropriatechain to open or close the valve.
L
H
L
Tee handles offer the sameinstallation space savings as oval
handles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.
OH & LO
OvalHandle
L
W
H
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
BA100/150BA300/350BA400/450OPTIONS
LockingOvalHandle
ChainLever
TeeHandle
H
L
W
Milwaukee offers two styles of oval handles,standard oval and a padlocking oval design.
Oval handles are intended for several differentapplications, they can be installed where a standard leverhandle might encounter interference from adjoining piping.Oval handles can also prevent accidental valveoperations, since they have less projection than a leverhandle, and require more turning force to operate. OSHArequires the use of oval handles in many installations forsafety reasons. The locking handle design willaccommodate a standard 5/16” pad-lock or other types ofvalve lockouts. The standard ovalhandle can be field or factory mountedon BA100/300/400 series valves up to2”, and the locking oval handlecan be used on sizes up to 1”.
Chain lever handle kits are designedfor installations where overheadball valves need to be operatedon a regular basis. A lengthof chain is attached to eitherend of the handle, so that theoperator needs only to pull down on the appropriatechain to open or close the valve.
L
H
L
Tee handles offer the sameinstallation space savings as oval
handles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.
OH & LO
OvalHandle
L
W
H
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
BA100/150BA300/350BA400/450OPTIONS
LockingOvalHandle
ChainLever
TeeHandle
H
L
W
Milwaukee offers two styles of oval handles,standard oval and a padlocking oval design.
Oval handles are intended for several differentapplications, they can be installed where a standard leverhandle might encounter interference from adjoining piping.Oval handles can also prevent accidental valveoperations, since they have less projection than a leverhandle, and require more turning force to operate. OSHArequires the use of oval handles in many installations forsafety reasons. The locking handle design willaccommodate a standard 5/16” pad-lock or other types ofvalve lockouts. The standard ovalhandle can be field or factory mountedon BA100/300/400 series valves up to2”, and the locking oval handlecan be used on sizes up to 1”.
Chain lever handle kits are designedfor installations where overheadball valves need to be operatedon a regular basis. A lengthof chain is attached to eitherend of the handle, so that theoperator needs only to pull down on the appropriatechain to open or close the valve.
L
H
L
Tee handles offer the sameinstallation space savings as oval
handles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.
OH & LO
OvalHandle
L
W
H
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
BA100/150BA300/350BA400/450
OPTIONS
LockingOvalHandle
ChainLever
TeeHandle
H
L
W
Milwaukee offers two styles of oval handles,standard oval and a padlocking oval design.
Oval handles are intended for several differentapplications, they can be installed where a standard leverhandle might encounter interference from adjoining piping.Oval handles can also prevent accidental valveoperations, since they have less projection than a leverhandle, and require more turning force to operate. OSHArequires the use of oval handles in many installations forsafety reasons. The locking handle design willaccommodate a standard 5/16” pad-lock or other types ofvalve lockouts. The standard ovalhandle can be field or factory mountedon BA100/300/400 series valves up to2”, and the locking oval handlecan be used on sizes up to 1”.
Chain lever handle kits are designedfor installations where overheadball valves need to be operatedon a regular basis. A lengthof chain is attached to eitherend of the handle, so that theoperator needs only to pull down on the appropriatechain to open or close the valve.
L
H
L
Tee handles offer the sameinstallation space savings as oval
handles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.
OH & LO
OvalHandle
L
W
H
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
BA100/150BA300/350BA400/450
O 3/8”, Both Ends
OPTIONS
LockingOvalHandle
ChainLever
TeeHandle
H
L
W
Milwaukee offers two styles of oval handles,standard oval and a padlocking oval design.
Oval handles are intended for several differentapplications, they can be installed where a standard leverhandle might encounter interference from adjoining piping.Oval handles can also prevent accidental valveoperations, since they have less projection than a leverhandle, and require more turning force to operate. OSHArequires the use of oval handles in many installations forsafety reasons. The locking handle design willaccommodate a standard 5/16” pad-lock or other types ofvalve lockouts. The standard ovalhandle can be field or factory mountedon BA100/300/400 series valves up to2”, and the locking oval handlecan be used on sizes up to 1”.
Chain lever handle kits are designedfor installations where overheadball valves need to be operatedon a regular basis. A lengthof chain is attached to eitherend of the handle, so that theoperator needs only to pull down on the appropriatechain to open or close the valve.
L
H
L
Tee handles offer the sameinstallation space savings as oval
handles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.
OH & LO
OvalHandle
L
W
H
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
BA100/150BA300/350BA400/450
OPTIONS
LockingOvalHandle
ChainLever
TeeHandle
H
L
W
Milwaukee offers two styles of oval handles,standard oval and a padlocking oval design.
Oval handles are intended for several differentapplications, they can be installed where a standard leverhandle might encounter interference from adjoining piping.Oval handles can also prevent accidental valveoperations, since they have less projection than a leverhandle, and require more turning force to operate. OSHArequires the use of oval handles in many installations forsafety reasons. The locking handle design willaccommodate a standard 5/16” pad-lock or other types ofvalve lockouts. The standard ovalhandle can be field or factory mountedon BA100/300/400 series valves up to2”, and the locking oval handlecan be used on sizes up to 1”.
Chain lever handle kits are designedfor installations where overheadball valves need to be operatedon a regular basis. A lengthof chain is attached to eitherend of the handle, so that theoperator needs only to pull down on the appropriatechain to open or close the valve.
L
H
L
Tee handles offer the sameinstallation space savings as oval
handles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.
OH & LO
OvalHandle
L
W
H
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
BA100/150BA300/350BA400/450
OPTIONS
ExtensionStem
The “XH” stem extension is simpleand effective design. This option isdesigned for installations where pipeinsulation would make standardhandles inoperable. The stemextension can also be used where ahandle needs to be raised above an
adjoining obstruction. Installations wherethe valve is mounted behind a panel can be
an ideal place for the “XH” stem extension. The external plasticshield helps to keep the insulation away from the stemextension, providing years of trouble free operation.
Extension Handlewith MemoryStop
The “XM” stem extension is all-metallicwith an adjustable memory stop. Thisoption is designed for installationswhere pipe insulation would makestandard handles inoperable. The
stem extension can also be usedwhere a handle needs to be raised above anadjoining obstruction. Installations where the valve ismounted behind a panel can be an ideal place for the“XM” stem extension. The adjustable memory stopallows the valve opening to be limited to a presetposition. This option can be ordered with or withoutthe memory stop.
0
45
90
0
45
90
MemoryStop
The “MS” Memory Stop offers theconvenience of a preset stopwhen the valve is used in a
balancing application. Thememory stop can be setfrom the full closed position,to any preset opening point.
The “LD”Locking Handleoffers the end userthe security of a padlockable handle. Thehandle can be locked in eitherthe full open position, or fullclosed by adding a standardpadlock. OSHA requires the use oflocking handles in manyinstallations for safety reasons.The locking handle design willaccommodate a standard 5/16”pad-lock or other types of valve lockouts. Thehandle and locking device are also manufactured ofstainless steel material for additional strength andcorrosion resistance.
LockingDevice
BA100/150BA300/350BA400/450
OPTIONS
ExtensionStem
The “XH” stem extension is simpleand effective design. This option isdesigned for installations where pipeinsulation would make standardhandles inoperable. The stemextension can also be used where ahandle needs to be raised above an
adjoining obstruction. Installations wherethe valve is mounted behind a panel can be
an ideal place for the “XH” stem extension. The external plasticshield helps to keep the insulation away from the stemextension, providing years of trouble free operation.
Extension Handlewith MemoryStop
The “XM” stem extension is all-metallicwith an adjustable memory stop. Thisoption is designed for installationswhere pipe insulation would makestandard handles inoperable. The
stem extension can also be usedwhere a handle needs to be raised above anadjoining obstruction. Installations where the valve ismounted behind a panel can be an ideal place for the“XM” stem extension. The adjustable memory stopallows the valve opening to be limited to a presetposition. This option can be ordered with or withoutthe memory stop.
0
45
90
0
4590
MemoryStop
The “MS” Memory Stop offers theconvenience of a preset stopwhen the valve is used in a
balancing application. Thememory stop can be setfrom the full closed position,to any preset opening point.
The “LD”Locking Handleoffers the end userthe security of a padlockable handle. Thehandle can be locked in eitherthe full open position, or fullclosed by adding a standardpadlock. OSHA requires the use oflocking handles in manyinstallations for safety reasons.The locking handle design willaccommodate a standard 5/16”pad-lock or other types of valve lockouts. Thehandle and locking device are also manufactured ofstainless steel material for additional strength andcorrosion resistance.
LockingDevice
BA100/150BA300/350BA400/450
OPTIONS
ExtensionStem
The “XH” stem extension is simpleand effective design. This option isdesigned for installations where pipeinsulation would make standardhandles inoperable. The stemextension can also be used where ahandle needs to be raised above an
adjoining obstruction. Installations wherethe valve is mounted behind a panel can be
an ideal place for the “XH” stem extension. The external plasticshield helps to keep the insulation away from the stemextension, providing years of trouble free operation.
Extension Handlewith MemoryStop
The “XM” stem extension is all-metallicwith an adjustable memory stop. Thisoption is designed for installationswhere pipe insulation would makestandard handles inoperable. The
stem extension can also be usedwhere a handle needs to be raised above anadjoining obstruction. Installations where the valve ismounted behind a panel can be an ideal place for the“XM” stem extension. The adjustable memory stopallows the valve opening to be limited to a presetposition. This option can be ordered with or withoutthe memory stop.
0
45
90
0
45
90
MemoryStop
The “MS” Memory Stop offers theconvenience of a preset stopwhen the valve is used in a
balancing application. Thememory stop can be setfrom the full closed position,to any preset opening point.
The “LD”Locking Handleoffers the end userthe security of a padlockable handle. Thehandle can be locked in eitherthe full open position, or fullclosed by adding a standardpadlock. OSHA requires the use oflocking handles in manyinstallations for safety reasons.The locking handle design willaccommodate a standard 5/16”pad-lock or other types of valve lockouts. Thehandle and locking device are also manufactured ofstainless steel material for additional strength andcorrosion resistance.
LockingDevice
BA100/150BA300/350BA400/450
2 1/4” Height
OPTIONS
ExtensionStem
The “XH” stem extension is simpleand effective design. This option isdesigned for installations where pipeinsulation would make standardhandles inoperable. The stemextension can also be used where ahandle needs to be raised above an
adjoining obstruction. Installations wherethe valve is mounted behind a panel can be
an ideal place for the “XH” stem extension. The external plasticshield helps to keep the insulation away from the stemextension, providing years of trouble free operation.
Extension Handlewith MemoryStop
The “XM” stem extension is all-metallicwith an adjustable memory stop. Thisoption is designed for installationswhere pipe insulation would makestandard handles inoperable. The
stem extension can also be usedwhere a handle needs to be raised above anadjoining obstruction. Installations where the valve ismounted behind a panel can be an ideal place for the“XM” stem extension. The adjustable memory stopallows the valve opening to be limited to a presetposition. This option can be ordered with or withoutthe memory stop.
0
45
90
0
45
90
MemoryStop
The “MS” Memory Stop offers theconvenience of a preset stopwhen the valve is used in a
balancing application. Thememory stop can be setfrom the full closed position,to any preset opening point.
The “LD”Locking Handleoffers the end userthe security of a padlockable handle. Thehandle can be locked in eitherthe full open position, or fullclosed by adding a standardpadlock. OSHA requires the use oflocking handles in manyinstallations for safety reasons.The locking handle design willaccommodate a standard 5/16”pad-lock or other types of valve lockouts. Thehandle and locking device are also manufactured ofstainless steel material for additional strength andcorrosion resistance.
The information presented on this sheet is correct at time of publication. Milwaukee Valve reserves the right to change design and/or materials without notice. For our Installation, Operation and Maintenance Manual and the most current product information go to www.milwaukeevalve.com.
State of California Prop 65 WARNING: Cancer and Reproductive Harm. For more information visit www.p65warnings.ca.gov.
BV-38
OPTIONS*BA200/250
BA480B/BA490BBA-475B/485B
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
The “XH” stem extension is a simple and effective design.This option is designed for installations where pipeinsulation would make standard handles inoperable.The stem extension can also be used where a handleneeds to be raised above an adjoining obstruction.Installations where the valve is mounted behind a panelcan be an ideal place for the “XH” stem extension.
XH ExtensionHandle SH
MemoryStop
The “MS” Memory Stop pr ovides an adjustable stopwhen the valve is used in a balancing application. The memory stop can be set to any preset opening point.
* Kits will fit both old and new style, all hardware included. Rev. 3
1-1/4"- 1-1/2"
OPTIONS*BA200/250
BA480B/BA490BBA-475B/485B
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
The “XH” stem extension is a simple and effective design.This option is designed for installations where pipeinsulation would make standard handles inoperable.The stem extension can also be used where a handleneeds to be raised above an adjoining obstruction.Installations where the valve is mounted behind a panelcan be an ideal place for the “XH” stem extension.
XH ExtensionHandle SH
MemoryStop
The “MS” Memory Stop pr ovides an adjustable stopwhen the valve is used in a balancing application. The memory stop can be set to any preset opening point.
* Kits will fit both old and new style, all hardware included. Rev. 3
1-1/4"- 1-1/2"
OPTIONS*BA200/250
BA480B/BA490BBA-475B/485B
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
The “XH” stem extension is a simple and effective design.This option is designed for installations where pipeinsulation would make standard handles inoperable.The stem extension can also be used where a handleneeds to be raised above an adjoining obstruction.Installations where the valve is mounted behind a panelcan be an ideal place for the “XH” stem extension.
XH ExtensionHandle SH
MemoryStop
The “MS” Memory Stop pr ovides an adjustable stopwhen the valve is used in a balancing application. The memory stop can be set to any preset opening point.
* Kits will fit both old and new style, all hardware included. Rev. 3
1-1/4"- 1-1/2"
2 1/4” Height
OPTIONS*BA200/250
BA480B/BA490BBA-475B/485B
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
The “XH” stem extension is a simple and effective design.This option is designed for installations where pipeinsulation would make standard handles inoperable.The stem extension can also be used where a handleneeds to be raised above an adjoining obstruction.Installations where the valve is mounted behind a panelcan be an ideal place for the “XH” stem extension.
XH ExtensionHandle SH
MemoryStop
The “MS” Memory Stop pr ovides an adjustable stopwhen the valve is used in a balancing application. The memory stop can be set to any preset opening point.
* Kits will fit both old and new style, all hardware included. Rev. 3
1-1/4"- 1-1/2"
OPTIONS*BA200/250
BA480B/BA490BBA-475B/485B
StainlessSteelHandle
The “SH” handle option adds a 316stainless steel handle and nut to astandard bronze ball valve. This option isintended for harsh environments likeareas subject to salt water spray, highhumidity, harsh cleaning chemicals, etc.
The “XH” stem extension is a simple and effective design.This option is designed for installations where pipeinsulation would make standard handles inoperable.The stem extension can also be used where a handleneeds to be raised above an adjoining obstruction.Installations where the valve is mounted behind a panelcan be an ideal place for the “XH” stem extension.
XH ExtensionHandle SH
MemoryStop
The “MS” Memory Stop pr ovides an adjustable stopwhen the valve is used in a balancing application. The memory stop can be set to any preset opening point.
* Kits will fit both old and new style, all hardware included. Rev. 3
1-1/4"- 1-1/2"
OPTIONS BA200/250BA475B/485B
handle might encounter interference from adjoiningpiping. Oval handles can also prevent accidental valveoperations, since they have less projection than a lever
Oval handles can be installed where a standard lever
2.81 1.72 .664.38 2.72 .93
4.38 2.72 .933.58 2.26 .72
2.81 1.72 .663.58 2.26 .72
Oval
handle, and require more turning force to operate.The standard oval handle can be field or factory mountedon BA-200/BA-475B series valves up to 2”.
BA250
BA485B
TeeHandle
Tee handles offer the sameinstallation space savings as ovalhandles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.
handle might encounter interference from adjoiningpiping. Oval handles can also prevent accidental valveoperations, since they have less projection than a lever
Oval handles can be installed where a standard lever
2.81 1.72 .664.38 2.72 .93
4.38 2.72 .933.58 2.26 .72
2.81 1.72 .663.58 2.26 .72
Oval
handle, and require more turning force to operate.The standard oval handle can be field or factory mountedon BA-200/BA-475B series valves up to 2”.
BA250
BA485B
TeeHandle
Tee handles offer the sameinstallation space savings as ovalhandles, with a slightly shorter endto end dimension. Tee handlesrequire more handle force tooperate, so accidental openings canbe reduced.