We are (A)NABL Accreditation (A)NABL Accreditation at Lab and Site for : a) Energy & Power b) CT/PT, Open Access Connection Metering Unit c) Dead Weight.

We are We are

(A)(A) NABL Accreditation NABL Accreditation at Lab and Site for :

a) Energy & Power

b) CT/PT, Open Access Connection Metering Unit

c) Dead Weight Tester

(B) Transformer, CT/PT, Energy Meter, Conductor Testing

(C)(C) NABL Accreditation NABL Accreditation at Lab and Site for Mechanical, Thermal and Electro-technical

(D) Training and Consultancy

(E) Research and Development Centre

C&I Systems, KotaC&I Systems, Kota NABL Accredited Calibration

Laboratory for Mechanical, Electro-technical and Thermal

C and I Calibrations Pvt. Ltd., JaipurC and I Calibrations Pvt. Ltd., Jaipur NABL Accredited Primary Standard

Calibration Laboratory for Mechanical & Electro-technical

A Primary A Primary Standard NABL Standard NABL

Accredited Accredited LaboratoryLaboratory

(A) (A) C and I Calibrations Pvt. Ltd., JaipurC and I Calibrations Pvt. Ltd., Jaipur

NABL Accredited Calibration Laboratory (NABL C-0768; lab and site ) : -

Energy and Power

FIRST FIRST IN IN

INDIAINDIA

FIRST IN INDIA NABL accredited laboratory to calibrate the reference meter of 0.02 Class at Site.

Equipped with COM 3003 Zera Germany, master with direct traceability to NPL India and DKD Germany.

Calibration meeting the requirements of Electricity Regulatory Board.





C and I Calibrations Pvt. Ltd., JaipurC and I Calibrations Pvt. Ltd., Jaipur

NABL Accredited Laboratory (NABL C-0768; lab and site ) : -

Energy and PowerElectricity Electricity Regulatory Regulatory

BoardBoardFacility for calibration of ABT meter, Energy Meter, LT/HT Accuchek, Energy meter calibrator, Power meter /Analyzer, CT/PT Burden Box, Meter Test Bench/ Source, Reference Standard.





CT / PT Calibration

Facility for calibration of Standard CT / PT , AC High Voltage and CT / PT Test set .


Energy , Power & CT ,PT Calibration Electricity Electricity Regulatory Regulatory

BoardBoardParameter Capability

Power / Energy 1Ø/ 3 Ø ; 40V to 320V, 40 Hz to 70 Hz, 1mA to 120 A 0.01% of rdg

Power Factor 0.00011 PF

Frequency 40Hz to 70 Hz 0.025%

CT up to 2000A Ratio ErrorPhase Error

0.03%2.5 minute

PT up to 33 kV Ratio Error Phase Error

0.08%4.0 minutes






NABL Accredited Laboratory (NABL C-0769; lab and site ) : -

PressurePrimary Primary

Standard for Standard for DWTDWT

Primary Standard for Dead Weight Tester Calibration upto 1200 kg/cm2 using Cross Float Method.

Equipped with DH-Budenberg UK Dead Weight Tester of Class 0.007% rdg Traceable to UKAS, UK.

Facility for calibration of DWT, Pressure Calibrator, Master Pressure Gauge, Pressure Transmitter, Transducer, Digital Pressure Indicator etc.





(B) C and I Calibrations Pvt. Ltd., Jaipur(B) C and I Calibrations Pvt. Ltd., Jaipur

TestingTesting Testing ActivityActivity

Distribution Transformer

CT/PT

Energy Meter

AAC/AAAC/ACSR Conductor





(B) NABL Accredited Calibration Laboratory

C&I Systems Kota-

• 15 years old Calibration Laboratory

• NABL accredited since 2000.

• Currently NABL accredited for Mechanical, Thermal and Electro-technical calibration.

• NABL accredited for site calibration as well.

12+ Years12+ Yearsofof

AccreditationAccreditation





NABL Accredited Calibration Laboratory

C&I Systems Kota- Electro-technical (NABL C-0190)

Mechanical (NABL C-0088)

Pressure & Vacuum

Dimension , Angle

Mass & Balance

Volume & Density

Speed

Sound

Force

Temperature & Humidity (NABL C-0191)







NABL Accredited Calibration Laboratory

C&I Systems Kota-

Our Specialities

Calibration of :

• High Voltage AC up to 100 kV & DC up to 35 kV

• Hygrometers (Humidity )

• Volume

• Hydrometer (Density)

• Medical Instruments like BP Instrument , Centrifuge, Incubator, Glass wares, Burette , Pipette etc.







NABL Accredited Calibration Laboratory (Mechanical)

C&I Systems Kota-

Discipline Parameter Capability

Pressure Pressure Calibrator, Gauges, Transducer, Tx, 0-400 Kg/Cm2 0.04% FS

Vacuum Vacuum Calibrator, Gauges, Transducer 0.045% FS

Spirit Level Up To 300mm 16 µm/m

Dimension Vernier, I/S, O/S Micrometer, Dial Gauge, Height Gauge, Borge Gauge, Feeler Gauge, Bore Gauge, Feeler Gauge, Measuring Tape/ Scale

0-1000 mm

Mass & Balance

Weights 1mg To 20kg Balance Up To 100kg

0.008 mg to 0.73g 0.12 mg to 2.689g

Our Coverage Our Coverage AndAnd

CapabilitiesCapabilities





NABL Accredited Calibration Laboratory (Mechanical)

C&I Systems Kota-


Volume 10 µl To 5 ltr. 0.02 µl – 0.065 ml

Speed (RPM) Tachometer (upto 50000 RPM) 0.02% FS Sound Sound Level Meter 94db, 114db 0.53 dB Density Hydrometer 0.6 to 2 g/ml 0.0013 g/ml

AngleBevel Protector/Combination Set / Clinometer 00-3600

3. 6 min.

ForceTension 0.1kN - 50kN, Compression 40kN - 2000kN

0.5%0.7%







NABL Accredited Calibration Laboratory (Electro-technical)

C&I Systems Kota-

(


Electro- technical

Power / Energy 63 V To 415 V,10 mA to 500 A 0.065 % to 0.5 % Power Factor 0.0055 PF Frequency Up To 10 Mhz 0.004% Current(AC/DC) 10 µA to 1000A Voltage(AC/DC) Up to 1000 V

0.03%-0.9% 0.005% - 0.5%

Resistance 0.001Ω T0 400 MΩ Insulation Resistance Up To 2GΩ

0.013%-0.93% 2.4%

Inductance 10 µH To 10H 0.35% - 0.55% Capacitance 10nF To 10mF 0.13% - 1.45%







NABL Accredited Calibration Laboratory (Electro-technical)

C&I Systems Kota-


Electro- technical

High Voltage AC 100kV High Voltage DC 35kV

0.7% to 2.8% 2.9%

Oscilloscope Time Mark 2ns To 5 S Band Width 600 MHz 5mv To 120V

0.014%-0.13% 3.46% 0.3%

Time (Stop Watch) 0.37 Sec-0.7 Sec. Turn Ratio Up To 2000 Turn 0.12%-1.5% Temp. Simulator/Indicator 0.02o C-0.26%o C







NABL Accredited Calibration Laboratory (Thermal)

C&I Systems Kota-


TemperatureRTD. T/C, Thermometer, Bath , Oven, Furnace - 350C to 12000C

0.10C - 2.40C

Humidity 20% to 90% RH 2.06%







Module Type of Training

Power and Energy

Principles & Techniques in Power & Energy Calibration and Uncertainty of Measurement

CT / PT Principles & Techniques in CT/PT Calibration and Uncertainty of Measurement

Electrical Calibration

Voltage, Current, Resistance, Watt Meter, Oscilloscope, Digital Multimeter and Uncertainty of Measurement

Mechanical Calibration

Dimension, Mass & Volume, Pressure & Vacuum, Force, Speed, Sound etc. and Uncertainty of Measurement

Thermal Calibration

Temperature & Humidity Calibration and Uncertainty of Measurement

TrainingTrainingByBy

ExpertsExperts

(D) Training and Consultancy

Technical Training on Calibration -





Standard Certification / Accreditation

ISO/IEC 17025 Testing and Calibration Laboratories

ISO 15189 Medical Laboratories

NABH, QCI Hospitals and Health Care units

ISO 9000, ISO14000, TS16949

Industries / Public Sectors / Govt. Institutions

ISO 22000 Food Industries / Food Outlets

ConsultancyConsultancyfor for

Value additionValue addition

Training and Consultancy

Consultancy -





Area Type of R&D

Our Patent Patent File No 1271/DEL/2012 for “ A PROCESS for treating dye house waste water for reclamation & reuse”

Waste Tyre Waste Tyre Pyrolysis for recovery of value added products

Solar Energy Solar Applications for Energy Conservation

Water Purification Water purification using Magnetic De-scaling

Effluent Water Treatment

Recovery & reuse of Effluent Water for zero Water Discharge

Our PatentOur PatentAndAnd

Other ResearchOther Research

(E) Research and Development

Sectors Covered -





Contact us at [email protected]

[email protected]

Visit us at www.cicpl.in





We are (A)NABL Accreditation (A)NABL Accreditation at Lab and Site for : a) Energy & Power b) CT/PT, Open Access Connection Metering Unit c) Dead Weight.

Documents

thermal c

calibration of dwt

calibration of standard

jaipur energy

calibration of abt meter

ci ci systems

pressure primary standard

electrotechnical dtraining