We agree that if you are the type of individual whose head meets the standards for protection, you don’t need a hard hat. Those feeling they can qualify.

HATS OFF TEST

We agree that if you are the type of individual whose head

meets the standards for protection, you don’t need a

hard hat.

Those feeling they can qualify should contact your supervisor

for testing.

Upon satisfactory completion of the test, you will receive a beautiful embossed certificate suitable for

framing.

You will also receive a wallet-sized card that must be carried on the job site.

It identifies your head as conforming to American

National Standards Institute (ANSI) Z89.2, Classes A, B,

C, and D.

The Test goes like this:

1. You will receive a 24-hour water immersion test.

Maximum permitted absorption is 0.5 % by weight.

While in horizontal position with head upon a steel

plate, an eight pound steel ball will be dropped upon

your head from a height of 15 feet…..

2. Next the impact test.

You must suffer no damage!

3 Your head will then be subjected to a variety of acids,

solvents, and oils.

Once again….. you may suffer

no damage.

4A propane torch will be used to determine if your head is fire

resistant. If only slow burning, you will receive an A or B rating. If holes appear in your head, a C

or D rating will be given.

In the final test, your head must sustain 2,200 volts AC, 60

Hz, for three minutes, with

leakage currents not exceeding nine milliamperes.

All tests must be conducted at a

variety of temperatures

ranging from minus 20 to 140 degrees

Fahrenheit.

If you feel you cannot

qualify, don’t despair.

Although not as pretty as your

hairdo, the hard hat does provide

protection from all of the above.

What is the service life of my hard hat? Suspension-no more than 12 months or

When wear or damage is noticed during regular inspection

Helmet-no more than 5 years orAfter an impact or penetrationWhen wear or damage is noticed during

regular inspection

Forward or Reversed? Depends on the manufacturer Sometimes it is legitimate

Working in tight placesWelding applicationsCrane operators see better when its

reversedMost of the time it is just fad (what’s cool)

The suspension must also be turned around

Reversed is not backward Designed to be worn

either way Sweat band is

uniform all the way around

Ratchet can swing to both sides with this style

Can I wear my ball cap under my hardhat? May interfere with the suspension

properties in an impact; therefore the manufacturer does not recommend it

What about kerchief or bandanna? Should not affect the impact properties

of the suspension as long as it is worn smoothly on the top of the head

Never store objects like these between the suspension and shell of your hat

Can I paint my hardhat? Paint may attack & damage the

helmet’s shell, thereby reducing the degree of protection originally provided

Can I put decals & stickers on my Hard Hat? Yes, but they should not be closer than

½ inch from the edge of the helmet & not covering any cracks or defects. Never drill a hole to insert a name tag, etc.

Questions?

Thank You