NATIONAL PARK SERVICE | HARPERS FERRY CENTER | 1ST EDITION | OCTOBER 2009 Wayside Exhibits A GUIDE TO DEVELOPING OUTDOOR INTERPRETIVE EXHIBITS National Park Service U.S. Department of the Interior
NATIONAL PARK SERVICE | HARPERS FERRY CENTER | 1ST EDITION | OCTOBER 2009
Wayside Exhibitsa guide to developing outdoor interpretive exhibits
National Park ServiceU.S. Department of the Interior
NATIONAL PARK SERVICE | HARPERS FERRY CENTER | 1ST EDITION | OCTOBER 2009
Wayside GuideNational Park ServiceU.S. Department of the Interior
Divided into three main sections listed below, the Guide defines the medium, illustrates standards and stages of work, and lists webpages for more in-depth tools and information.
3-4 ForewordWhat it is, who it’s for, and how to use it.
5–24 Section A The Wayside Medium: An OverviewA look at the strengths and limitations of the wayside medium, including tips for park managers
25–61 Section B Wayside DevelopmentPlanning, design, writing, and graphics acquisition
62–78 Section C Wayside ProductionProduction, installation, and maintenance
79–80 Index
81–84 AppendixA list of webpages included throughout the Wayside Guide
Foreword
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 3
Wayside Guide
What is the Wayside Guide?The Wayside Guide is an overview of the National Park Service (NPS) wayside exhibit standards and work process. The Guide emphasizes best practices and good examples of site-specific outdoor interpretation based on visitor-use data. Waysides may appear simple in form and function, but their development can be complex.
This Guide is not a complete how-to manual. It is a supplement to professional-level knowledge and skills for graphic design, interpretive writing, research, and other disciplines.
Goal The purpose of this Guide is to provide information and tools for preparation, participation, and management of a wayside project.
Who Benefits? ParksPark superintendents will be better able to scope a project when fully informed of the wayside process. Budgets and schedules are more accurate when based on a clear understanding of the work, the level of staff participation, and additional assistance needed. Park staff will be better prepared to participate in, communicate, and manage the additional workload.
Park PartnersMany park partners request NPS assistance in developing wayside exhibits. With the exception of the National Park Service brand, park partners and other non-NPS organizations are encouraged to use the Wayside Guide. Partners are encouraged to build on these standards and develop their own “Section D.”
Harpers Ferry Center Media specialists can work more efficiently and effectively when all team members have a good understanding of the process. Media specialists will use the Guide to orient new staff and project teams, and as course material for workshops and training on the wayside process.
ContractorsContractors will understand the expectations of the NPS and benefit from improved efficiency when all team members have a good understanding of the process. Project delays can be costly. Waysides, unlike exhibits and films, are a relatively low-cost medium. A better informed project team will minimize contract modifications and delays.
VisitorsVisitors who experience poor-quality wayside exhibits may choose to avoid the medium entirely. Conversely, a visitor who has had an enriched experience from compelling, high-quality waysides, will come to expect the same in other locations. Improving all waysides will increase the active use and high level of visitor-expectation for the medium as a whole.
Foreword
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 4
Wayside Guide
How Does It Work?The Wayside Guide is designed to support teams of media specialists and park managers with wayside development and production. It is organized around two work process charts that outline major stages of work and supporting activities. Each activity is illustrated in a double-sided page, or pages. Not everyone on the team needs to read the entire document. Use the Guide a-page-at-a-time, or in its entirety.
Send comments and questions about the Guide to [email protected] or call 304-535-6200.
A Brief Look Use Section A and the Work Process Charts for basic information about waysides and the work process. Use this section to help the project team, and stakeholders, understand the nature of the wayside medium.
Use select pages from Section B and C throughout a project for team meetings and new assignments, to help contractors understand expectations, and to prepare for the next steps in a project. Use these sections to help team members understand how their work contributes to the whole.
Some principles of wayside development are more timeless; technologies and tools are rapidly evolving. Links to more frequently-changing information are provided as webpages. Use these to download supporting PDF documents, or watch videos. Use the Appendix to find all the webpages listed in the Guide.
Use the Contents Pages and Index to navigate through the Guide.
Look for sidebars highlighting the major roles of key project personnel, what to expect, and other notes of interest.
The Guide is designed to be printed in color, double-sided, on 8½x11 paper with room for a binding or three-ring hole punch on the left side. The work process charts are designed to print on 11x17 paper.
In-Depth
Web Links
Navigation
Sidebars
Printing the Guide
The Harpers Ferry Center website offers downloadable tools and documents on all aspects of media development. www.nps.gov/hfc
Wayside Guide
Section The Wayside MediumAWhat is a wayside exhibit, who is the target audience, and what makes a good wayside opportunity? Section A answers these questions, provides foundation information for wayside developers, and includes advice for park managers.
National Park ServiceU.S. Department of the Interior
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 5
Section A Wayside Guide | The Wayside Medium: An Overview
Contents
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 6
U
A
7 Site-Specific Interpretation
ow-Profile Interpretive Waysides
pright Orientation Waysides
dvice for Park Managers
11 L
17
23
Section A Wayside Guide | Site-Specific Interpretation
Site-Specific InterpretationAn effective wayside exhibit enhances a direct and meaningful connection between visitors and the landscape. The wayside audience is outside experiencing a place first-hand. They may be focused on any number of things. A wayside must attract and focus attention on the site, not on the wayside. If the first wayside they encounter is disappointing visitors may not stop at others.
Kenai Fjords National Park, low-profile
Two Types of WaysidesMost national parks use two types of waysides, Low-profile exhibits (above)give site-specific interpretation about features that visitors can readily see. Upright waysides (left) typically inform visitors about an area or a trail. Both styles are described in greater detail beginning on page 11.
What Makes a Good Wayside Opportunity?Four key factors lead to successful wayside exhibits: a significant landscape feature with a well-documented story; at least one compelling, site-specific, reproducible-quality graphic that illuminates the story; a safe, accessible place for visitors; and routine maintenance of the site and the sign. There are many media options for reaching park visitors. If the right conditions do not exist for wayside exhibit experiences, consider another medium.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 7
Erie Canalway National Heritage Corridor, upright
Four Key Factors
1 Significant Feature2 Site-specific Graphic3 Visitor Access4 Regular Maintenance
Section A Wayside Guide | Site-Specific Interpretation
Western end of the 1825 Erie Canal in Buffalo
1 Significant Landscape FeatureWhat intangible meanings are associated with this specific terrain? What is the unique significance of this place and why should someone care? Within the first three-second glance at a wayside, visitors should see a connection to the landscape. Some landscapes have obvious features (above). More subtle landscapes (below) require graphics that direct viewers’ attention to things less obvious.
Pea RidgeNational Military Park
2 Site-Specific GraphicsFinding or developing compelling, site-specific graphics that tell the story is key to a successful wayside exhibit. Historic images placed on the landscape where the original photographer stood make a powerful and immediate connection for visitors. When photos are lacking, illustrations like the one shown above can tell the story.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 8
Section A Wayside Guide | Site-Specific Interpretation
WWII Valor in the PacificNational Monument
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 9
Fort DonelsonNational Battlefield
3 Visitor Access and SafetyPlace wayside exhibits in the “front-country” (not wilderness areas) along pathways, trails, and vehicle pull-outs. Consider landscape plans and the space needed to give visitors a comfortable, safe, and accessible area to gather without disrupting the flow of foot-traffic (above right) or spilling into automobile or bike traffic. Standard waysides provide little benefit to visitors with visual impairments. Plan to make the information available through alternative methods like audio programs (above left).
Harpers FerryNational Historic Park
Harpers FerryNational Historic Park
4 Regular MaintenanceMost waysides are designed to be permanent. Panel materials last 2–25 years averaging about 5 years before replacement is necessary. At a minimum, waysides require cleaning twice a year and regular inspections for vandalism or weathering. Vista clearing and trail maintenance may also be needed to keep the view open and the site safe. If waysides have tactile elements or Braille, they need more frequent inspections and cleaning.
Section A Wayside Guide | Site-Specific Interpretation
When NOT To Use a WaysideEven if the conditions outlined on the previous pages have been met, creating a wayside may still not be a good idea.
Intrusion on the LandscapeWaysides impact the landscape. In natural areas they are an artificial intrusion. In historic areas they are a modern intrusion. Using too many waysides creates clutter and overwhelms visitors.
Sensitive Sites Waysides call attention to themselves and to the places they interpret. Using waysides to direct attention to sensitive areas (e.g., archaeological remains or nesting sites) may not be a good idea. Digging holes to install a wayside or hard-surfacing a trail may not be advisable in some areas.
Complex StoriesWaysides do not tell complex or dynamic stories well. Multiple geologic events, activities that cover vast expanses of terrain well beyond the view, and complex human interactions may best be addressed by other media.
Site-Specific MediaRanger-guided tours, trail brochures, audio tours, and other new technologies are options for site-specific interpretation and orientation. They offer features like multiple languages, audio description for visitors with visual impairments, longer narrative and quotations. They also require a different maintenance regime. What they do not offer is the large-format compelling graphic communication that is the strength of the wayside medium.
A word of caution about multiple media: it is difficult to read and listen at the same time. Visitors may choose to listen to an audio message, and also want to enjoy and read the wayside exhibits. Coordinate site-specific media to take advantage of the strengths of each medium and provide redundancy to give access to the widest range of people.
Interpretive Media SelectionSelecting the right media is as much art as science. There is rarely one way to achieve a goal. Involving media specialists in key decisions is highly recommended. Each situation has its own mix of factors to consider.http://www.nps.gov/hfc/products/ip-media-select.htm
Evaluations and Visitor Use StudiesUnderstand your audience. Consider interviews and/or focus groups of potential visitors to find out what information they need and want to know, and how to present it in a meaningful, interesting, and cost-effective way. Consider using temporary panel materials in portable bases for evaluation. Plan for persons with disabilities to ensure inclusion in the wayside program.http://www.nps.gov/hfc/products/evaluate.htm
Foundations of InterpretationThis free on-line course provides an introduction to the foundations of interpretation. It answers the question “What is Interpretation?”http://www.eppley.org/index.php?main_page=index&cPath=40
Visitors listen to an audio tour of Pickett’s charge in Gettysburg National Military Park
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 10
Viewing scopes can help visitors see distant landscapes.
Section A Wayside Guide | Low-Profile
Captioning the LandscapeThe low-profile wayside exhibit is a caption on the landscape. It is not designed to stand alone any more than a caption for a photograph is intended to be read by itself. It is incomplete until it is placed within the environment it is meant to interpret. The best low-profile wayside illuminates what visitors see.
36 x24 in-ground mount, Dayton Aviation Heritage NHP
What Makes an Effective Low-Profile Wayside?A specific landscape feature should drive the content and focus. If done well, waysides, like lightning bolts on the landscape, cause thundering moments of “Aha!” in the visitor. The combination of compelling graphics, title, and text designed into the landscape illuminates and enhances what the visitor is seeing, experiencing, or passing by. This is what makes an effective interpretive wayside exhibit.
The next four pages show key elements of effective low-profile wayside exhibits.
24 x 24, City of Rocks NR
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 11
6 x 12 plant ID waysideHaleakala NP
Section A Wayside Guide | Low-Profile
Haleakala National Park
Compelling GraphicsWaysides are a graphic medium. The main image should tell the story. As shown above, the graphic can tell a story by singling out and highlighting a particular landscape feature. Wayside layouts differ from book or magazine layouts, which rely more on text. Primarily visual, wayside exhibits rely on bold graphics that, with the landscape, convey focus and meaning.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 12
Fredericksburg and Spotsylvania National Military Park
Direction of ViewThe wayside’s low angle and position channel visitors’ attention in a specific direction. The low-profile wayside should align the intended direction of the visitors’ attention, the wayside panel, and the landscape feature as shown above.
Did You Know?
Attention span at a wayside is relatively short, 30–45 seconds on average.
Section A Wayside Guide | Low-Profile
Golden Spike National Historic Site
How Many?How many waysides are appropriate? Trying to interpret everything significant could spawn a dense forest of waysides. Too many waysides can dilute each interpretive opportunity and compromise the experience. Too few might shortchange the visitor. The best waysides make one point and one point only and blend harmoniously with the setting.
Upper DelawareScenic and Recreational River
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 13
Illustrations and DiagramsBy using transparent or cutaway views, illustrations and diagrams peel back landscape surfaces, show how structures are built (above), or reveal how things work. A bird’s-eye view enlarges the viewer’s perspective. A micro-view brings the focus up close.
These two waysides show two different ideas about the significance of the last spike.
Section A Wayside Guide | Low-Profile
New Bedford Whaling NHP
Compelling TitlesA compelling title grabs the visitor. It is not a subject title. “Candle-Making in New Bedford” or “Geology of Badlands” are subject titles for the examples above. Compelling interpretive titles go beyond the subject matter at hand. They provide a hook into the meanings and significance of the subject. Titles may contrast with the landscape or main graphic to create tension, and interest, between the two as shown in the Badlands example.
Interpretive TextFew people come to parks for the express purpose of reading. Wayside text should succinctly illuminate the terrain with meaning and significance. Write the first sentence so the audience will want to know more. Focus on the physical feature first. Some of the subject matter may be fiendishly complex. That is where concise expression becomes an enjoyable challenge. Be active, not passive. Use first-person quotes. Use common language; avoid jargon. Do not use adjectives that tell visitors what to think. Avoid preaching. Answer the question, “So what?”
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 14
Badlands NP
De Soto NMQuotationsFirst-person quotes spoken at, or about, a specific site, add credibility and power to the story. Quotes are presented differently than narrative text. They represent a different voice.
A wayside exhibit audience is not captive. If they read something predictable, academic, or jargon-ridden they may pass by.
Section A Wayside Guide | Low-Profile
Chain of VolcanoesOn a clear day several snow-covered summits appear to line up in the distance beyond the Tatoosh Range. All are large, active volcanoes that line the western edge of North America from Northern California to Southern British Columbia. This chain of volcanoes, part of the Pacific Ring of Fire, is growing above the collision zone of oceanic and continental plates.
Nineteen major volcanoes appear in a chain of fire from northern California to British Columbia.
National Park ServiceU.S. Department of the Interior
Mount Rainier National Park
Mount Adams Mount St. Helens
The 1980 eruption of Mount St. Helens displayed the power of Cascade volcanoes. The effects were catastrophic, but much larger eruptions have occurred in the past.
With large populations nearby, Mount Rainier is potentially dangerous because its huge volumes of snow and ice could generate deadly lahars.
Goat RocksCastle Peak Pinnacle Peak Plummer Peak
Mount St. Helens — erupted 1980-86
Mount Rainier — erupted 1859; steam eruptions 1894-95
Mount Adams — small eruptions 1,000 years ago
Mount Hood — eruptions about 200 years ago
Mount Rainier NP
Label the LandscapeWaysides should identify significant features. They need to answer the question, “What am I looking at?” To give names can be useful, but to explain why features are relevant adds value. This example highlights the peaks visible on the horizon and their place in the larger Pacific ring of fire.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 15
Tactile model, WWII Valor in the Pacific NMTactile model, Timpanogos Cave NM
Models and 3D ElementsTactile models give visitors with visual impairments access to ideas and information. They also increase the range of an exhibit’s appeal, engage people with different learning styles, and add emphasis to the story. Tactile elements can be mounted to a flat panel as shown above left, or they can be stand-alone or separate structures as shown above right.
Section A Wayside Guide | Low-Profile
Common SizesThe following examples are common panel sizes. Choose panel sizes based on graphic and written content, and location. Be consistent in size and shape throughout a site or park.
The low-profile angle is 45 degrees
42 x 24 This size is appropriate for high-quality panoramic images, main text of no more than 100 words, stories with side-bar or secondary graphics and captions or longer quotes, and for bilingual waysides.
36 x 24 This is the most common size. It has room for a large graphic, 75-100 words of main text, small inset graphics, and short captions or labels.
24 x 24 This size works well when there is a single simple graphic with 75 words of text and one or two short captions or labels.
6 x 12
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 16
Trailside exhibits are low to the ground and most often used as identification panels for plants or architectural features. They require a single simple graphic, short title, and 25 words of text.
Section A Wayside Guide | Upright
Upright Orientation WaysidesWhat sets uprights apart from low-profile waysides is that they do not direct a visitor’s attention to a specific landscape feature within view. They introduce a trail or an area suitable for a day-hike. They are placed at a pedestrian’s decision point and provide orientation, safety, and site significance. They are part of a wayfinding system that may include signs, brochures, and other media.
What Makes an Effective Orientation Wayside?Like low-profile waysides, orientation waysides are a graphic medium that must attract the pedestrian en route. They should answer the natural questions related to a safe, comfortable, and meaningful experience. They should help visitors decide whether to invest the time and energy required to reach the destination described. The balance between orientation and interpretation depends on the nature and complexity of the site or trail.
The next four pages show some of the key elements of effective upright orientation wayside exhibits.
36 x 48 upright, Zion National Park
36 x 48 upright, Bandelier National Park
Common Sizes
Most upright orientation waysides are 36w x 48h. Smaller panels are generally 24w x 36h.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 17
36 x 48
24 x 36
Section A Wayside Guide | Upright
Haleakala National Park
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 18
Everglades National Park
Decision-Making Information“Why is this trail here and what is there to see? Do I have the time, endurance, or proper gear to comfortably and safely set out on this journey? Is the trail accessible for wheelchairs? Can I bring my dog, my bike, or my fishing rod? If I follow the trail, will I be able to find my way back to my car?” These are questions people may have before heading out. Maybe they stopped at the visitor center first; maybe they did not. The orientation wayside is strategically placed along the natural flow of pathways at the point where the decision to explore, or not to explore, is made. Too soon in the visit, and a person may not be ready to consider all the details of a trail, or experience. Too late and they may have already left without enough water.
Orientation and Site SignificanceA careful balance of site significance and need-to-know orientation information makes upright waysides successful. Generally the upright orientation panel is a large panel (36” wide by 48” high), but studies have shown that visitors view them for only 30–40 seconds. The examples above combine a compelling image with minimal interpretive text and a simple map with orientation and safety information to invite people to pause, but not linger, at the trailhead.
Rules and Safety InformationThe orientation wayside is an important opportunity to reinforce basic rules, safety, and orientation information before someone heads out into the park. Waysides must attract their audience through compelling graphic presentation. They are not required reading. A long list of “do not” symbols or Code of Federal Regulations may not reach many visitors. Present rules and safety information in the context of what visitors really care about—their experience. Consider presenting safety information as a interpretive opportunity.
Section A Wayside Guide | Upright
National Park ServiceU.S. Department of the Interior
Lassen Volcanic National Park
You Are HereLassen Peak
Lassen Volcanic National Park
Glacial NotchA mountain glacier fashioned the amphitheater-like depression below
you, where Lassen Peak’s only permanent snowfield hides. Volcanoes
are not the only mountain shapers that have left their mark on Lassen’s
landscape. Glaciers have covered and carved volcanoes’ work here
for more than two million years. But because Lassen’s dome was built
27,000 years ago, this glacial notch was formed in more recent times.
The last glacial episode here was 11,000 to 8,000 years ago.
First Signs | J U N E 0 9 , 1 9 1 4
We stopped to take…pictures…of…steam…coming out of the crater.…Millford said he
heard or felt a slight rumbling…he shouted, “Look there!”….We saw huge columns of smoke
ascending…500 feet above the mountain….The sight was fearfully grand….To say we were
excited is putting it mildly.
B. F. Loomis
you are
0.9 milefrom the top
24 X 24 INCHES | 40% OF ACTUAL SIZE | JUNE 2004 | LASSEN VOLCANIC NATIONAL PARK | Wayside Exhibit 18
Wayside MapsWayside maps work differently than other park maps because they are fixed in place and cannot be turned around or carried away for further reference. They often work better when oriented in the direction of view, meaning that north is not always at the top. Wayside maps should provide only the necessary information to help people get from where they are (You Are Here) to point B. At point B, additional trail signs or trail guides may be necessary. If a trail is short and simple, a map may not even be needed.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 19
36 x 48 upright orientation bulletin case, and brochure dispenser, City of Rocks National Reserve
Bases and AncillariesWayside exhibits are on duty even when the visitor center is closed. In this example above, the orientation wayside is placed next to the bulletin case and brochure dispenser to serve as a kind of visitor center information desk for the after-hours visitor. Clusters of waysides, bulletin cases, and other hardware like fee boxes or brochure dispensers can create a sense of focus and destination for self-guiding visitors. They can stand alone at a road-side pull-out, or be placed near a visitor center as this example shows. Keep in mind, all visitors including those with sight impairments, and consider media options for after-hours visitors.
Section A Wayside Guide | Upright
Obed Wild and Scenic River
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 20
KiosksClusters of wayside panels, rules and safety information, bulletin cases, brochure boxes, trash cans, and recycling bins are often grouped in a kiosk arrangement with, or without, a roof. Some have lighting to make them useful after dark. Often, the design of the kiosk matches surrounding architectural structures, as in the three examples shown above. Standard panel mounting hardware can be used on custom kiosks to reduce initial and life-cycle costs.
Great Basin National Park Great Basin National Park
Section A Wayside Guide | Upright
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 21
Bulletin CasesUse bulletin cases for frequently changing information. Seasonal notices, short-term trail closures, weekly or monthly interpretive programs, or other temporary messages are appropriate for a bulletin case. Information that does not change for six months or more should be posted in a durable sign material (see example at left). Avoid placing small-print documents in a bulletin case. Text smaller than 36 point will be difficult to read. Postings can fade quickly and may need to be changed frequently or printed with UV-resistant inks to maintain contrast and legibility. Rules and safety information should be legible and clear. If a bulletin case is necessary, consider the space needed for postings, and choose an appropriate bulletin case size.
Zion National Park
Example of a 12” x 12” park regulations sign
Section A Wayside Guide | Upright
Wayfinding Beyond the WaysideThe elements of wayfinding include a series of visual, editorial, and environmental cues for visitors to navigate and experience a park. Orientation waysides are one of several wayfinding media.
Directional and Orientation SignsOrientation waysides work best with a good sign system. A common pitfall when developing orientation waysides is a lack of consistency between signs (left), maps, and orientation information. For example, a map label that says “Canyon Visitor Center” should match the sign on the building that also says “Canyon Visitor Center.” This may seem obvious, but it is an easy mistake to make when the park staff refer to a site, building, or trail by a common name that differs from its formal name.
National Park Service Sign ProgramThe National Park Service UniGuide Sign Standards include over 600 pages specifying the design and fabrication of a wide range of sign types, including trail signs.http://www.nps.gov/hfc/products/uniguide.htm
Park Publications and Trail GuidesPark-produced trail guides or site bulletins are another wayfinding tool. Site bulletins (left), park newspapers, NPS Unigrid brochures, and other park publications can provide longer narratives and more detailed portable maps. They can expand upon safety and regulatory information. And they can be printed in Braille or large print text for visitors with sight impairments.http://www.nps.gov/hfc/products/pubs/
National Park Service MapsThe Harpers Ferry Center cartographic website contains park maps (those published in the NPS Unigrid brochures), special map collections, and map resources and information like starter map files and recreation symbols.http://www.nps.gov/hfc/carto/index.htm
Other Wayfinding MediaNew technologies like GPS-based, hand-held devices (left) can help a self-guiding visitor with a lot of information via audio and small-screen video. None of these devices provide the large format graphic that a wayside exhibit does. Some of these devices and new technologies can be used in concert with waysides to provide an audio component including audio description for visitors with sight impairments, and translations for those who do not read English.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 22
Section A Wayside Guide | For Park Managers
Advice for Park ManagersWayside exhibits can be a relatively inexpensive medium on a per-unit basis if the project is handled properly and false starts are kept to a minimum. Here are the key factors to help you keep your project in budget and on schedule.
Work with Foundation DocumentsReview the General Management Plan, Long-Range Interpretive Plan, Historic Structures Report, and other foundation documents with your project team. These plans match appropriate media with the message, describe desired interpretive opportunities, and provide important reference for wayside projects. They help the project team focus on specific visitor experience goals and avoid trying to tell all park stories in a single medium.
Assign a Project LeadMake sure it is clear who is responsible for managing the project within the park. Also make sure the team leader has authority and skills to assemble a team; monitor project agreements and contracts; build consensus; enforce deadlines; consolidate review comments; comply with the requirements and limitations of project funding; and coordinate work among resource management, law-enforcement, maintenance, and interpretation. This is a significant workload.
National Park Service
U.S. Department of the Interior
Catoctin Mountain Park
Long-Range Interpretive Plan
52 I national park Service
Implementation PlanActions, divided into annual, achievable steps are reproduced in the Annual Implementation Plan (AIP) (DO-6, page 6).
The measure of success of any plan is the extent to which it is implemented. Initial implementation of strategies needs to be
both realistic and flexible. The charts on the following pages outline an initial blueprint for the park’s interpretive programs.
Because funding opportunities and priorities often change, park management may need to adjust the implementation
strategies to adapt to changing conditions.
The park interpretive staff and key park partners should meet each year to draft an Annual Implementation Plan (AIP) for
each new fiscal year based on funding opportunities and coordination with other projects.
FacilitiesMake alterations to the visitor center based on an Exhibit
Schematic Proposal for new exhibits.
WebsiteChange the website’s link to the park map to go directly to the
map, not its welcome page.Adjust the statistics pages so that data can be kept on which of
the site’s pages are used most.Add a photo gallery to the park’s website, and add site/camp
slide shows to the park’s website.
Write PMIS statement for video podcasts
Add “flash files” with education curriculum materials, Junior
Ranger activities, etc.Upgrade the site’s nature and science page to include research
results.Look for partners, contractors, other staff, or volunteers to
assist in website maintenance. Identity/Orientation Signs
Arrange for NPS Sign Program staff to visit the park to survey
existing sign conditions, and provide a conditions plan that
proposes a location for each new sign that is recommended.
Design a parkwide sign plan that identifies the park as a unit
of the National Park System and provides orientation for all
visitors, whether they enter the park in a vehicle or on foot.
Secure funding and implement the parkwide sign plan as
described in the National Park Service UniGuide Sign Standards.
The standards include park identity, motorist guidance, and
visitor information signs. All NPS arrowhead logos should be
updated to the new style.Wayside ExhibitsRequest funding and for a parkwide wayside exhibit proposal,
a wayside exhibit plan, and production.
Once funding is secured for the proposal stage, arrange for a
HFC wayside exhibit planner to visit the park and—along with
the park staff—develop a parkwide Wayside Exhibit Proposal.
Once funding is secured for the wayside planning stage, let a
contract through HFC to plan, design, and prepare production-
ready files for all the newly proposed wayside exhibits.
Once funding is secured for the wayside production stage, let a
contract through HFC to produce and ship the final panels and
bases to the park (for park maintenance to install).
Catoctin Mountain Park Interpretive Media – Non-Personal Services
Short-Term
Long-Term Out years (6 & 7)
Tasks
2008 2009
2010 2011 2012
2013 2014 2015
4 4
2007
2007
4
4
4
4
4 4
4 4
4 4
4
4
4
4
4
4
Cost estimates for interpretive media can be provided by Harpers Ferry Center in a separate document; call (304) 535-5050 to request estimates.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 23
Section A Wayside Guide | For Park Managers
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 24
Dedicate Staff TimeHow much time should be dedicated to the project? At a minimum, every project will require team members to participate in the initial site visit and to assemble various resource packages. But that is just the beginning. Your staff will need time to review and prepare consolidated comments on concepts, text drafts, map and illustration roughs, graphic layout proposals, and production proofs. Maintenance staff will need time to inspect, assemble, and install panels and bases. Some installations may require landscaping, vista clearing, building accessible pads, or other site preparation.
Consider Park and NPS ResourcesWhat does the park have to contribute to the wayside project? Is there a well-managed graphic collection? Is there existing artwork? Providing draft text, primary source material, custom photography, GIS data, or landscape design services may shorten the project schedule, save money, and help ensure a better final product. This also requires significant time.
Avoid DiscriminationThere are no laws that require waysides in National Parks. There are laws that require accessibility for all programs. A collection of wayside exhibits is considered a program. Avoid discrimination and make sure your wayside program is accessible to all visitors.
Understand Wayside ContractsThere is no one-stop shopping for wayside exhibits. Wayside projects generally require working with one or more contractors. These may include cartographers, illustrators, and fabricators. Unlike many firms that plan and design museum exhibits or signs, the contractors who specialize in waysides are typically few in number and small in size. It is important to respect established schedules. Avoiding delays will also reduce cost overruns and ensure a smoother work process.
Know the Approval Process Up FrontDecide who will review each stage of the project, resolve differences of opinion, and consolidate written comments. Do this before the project starts. As the project progresses, the cost of changes increases. Reviewers who have not been involved throughout the project can cause delays, confusion, and add significantly to costs. If you plan to involve reviewers outside the park, consider inviting them to the project start-up meeting. If you want visitor input, plan for the evaluation process in the budget and schedule.
Ensure ComplianceMake sure staff from interpretation, maintenance, resources management, law-enforcement, and other divisions and the accessibility coordinator, are involved. Obtain compliance with regulatory and policy guidelines.
Take Pride in OwnershipAre there funds for staff or volunteers to do regular maintenance, repair, and vista-clearing? Wayside exhibits are a relatively low-maintenance medium, but they do require routine inspection, periodic cleaning, repair, and replacement. It is important that this responsibility be clearly assigned. For parks working with Harpers Ferry Center, project files are archived at the Center. If not, select a secure location to store production files. When it’s time to replace a damaged or worn panel, you’ll need these files to get the job done.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 25
Wayside GuideNational Park ServiceU.S. Department of the Interior
Section Wayside DevelopmentBThe Wayside Exhibit Development Process chart that begins this Section outlines five major stages of work. This section details the development process, highlighting for each stage the major roles, common pitfalls, case studies, and recommendations for review and approval.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 26
Section B Wayside Guide | Wayside Development
Contents
Wayside Exhibit Development Process Chart
Project Startup
Site Analysis
Project Proposal
Research and Graphic Acquisition
Wayside Exhibit Plan
41 Design with a Grid42 Wayside design: How is It Different?43 Case Studies47 Common Pitfalls in Wayside Design48 Writing for Wayside Exhibits49 Common Pitfalls in Wayside Writing50 Examples of Good Wayside Writing52 Tools and Resources for Wayside Writers53 Wayside Exhibit Plan Review and Approval
Creating New Illustrations
Creating New Maps
Models and Tactile Elements
Final Wayside Plan
27
28
30
34
38
40
54
56
58
60
Wayside Exhibit Development Process
Project Startup
Project Startup focuses on preparing a solid
foundation for all work that follows, ensuring
that the project is logically structured and
its goals are understood and realistically
attainable. Project lead, team members, and
stakeholders are identified and their roles
defined.
Project Startup
Establish the project team
• Identifytheprojectlead,subject-matter
experts,projectreviewers,parkpartners,and
mediaspecialists.
Review foundation documents
• GatherandreviewGeneralManagement
Plans,Long-RangeInterpretivePlans,Historic
StructuresReports,andotherguiding
documents
List potential wayside exhibit sites and subjects
Conduct Front-End Evaluation
Establish the funding and any time restrictions
Develop a Project Management strategy
Begin Research
• Identifyresourcematerialsandbibliographies
• Gatherpotentialsite-specificgraphicresources
• Developagraphicsnotebookcontaining
potentialgraphicsforusewhenevaluating
exhibitsitesduringthesitevisit.
Plan the site visit
Site Analysis
Wayside exhibit planners and designers
work with the park staff and subject-matter
experts to evaluate potential exhibit sites
and determine exhibit purposes and content
based on site-specific features, events, and
park primary themes.
Site Analysis
Conduct startup meeting
• Reviewwhatmakesaneffectivewayside,the
workprocess,accessibilityrequirements,panel
andbasematerialchoices,resourcesgathered,
andteamrolesandresponsibilities.
Analyze wayside exhibit sites
• Visitpotentialexhibitsiteswithparkstaffand
subject-matterexperts.
• Identifysite-specificsignificanceandmeaning,
andrelevantgraphicmaterials.
• Identifyeachexhibit’spurpose,orientation,
panelsize,andsiteconditions.
• Developthumbnailsketchestofacilitate
discussionsandagreement.
• Photographexhibitsitesandsite-specific
features.
Gather Reference and Graphic Material
• Basedonsitediscussion,gathergraphicsource
materialsrelevanttowaysidecontent.
Conduct close-out meeting
• Reviewthumbnailsandgraphicdirectionfor
thewaysides.
• Reviewrevisedschedule,budget,andnext
steps.
• Summarizedecisionsmadeandany
outstandingissues.
Project Proposal
A proposal document is prepared using
the Wayside Exhibit Planner Database.
The Proposal identifies the project’s scope
including cost estimates, schedule, and other
pertinent project data.
Project Proposal
Prepare proposal
• Documenttheselectedexhibitlocationsand
purposes,panelandbaseselections,andmap
andgraphicneeds.
• Createsitemapofwaysidelocations.
• Refinethumbnailsketches.
• Developdetailedcostestimate.
Proposal review, revision, and approval
• SubmitProposal,costestimate,andproject
agreementforreviewandapproval.
• Parkstaff,includingmaintenance,reviewthe
Proposaltoconfirmalldecisions.
Reference and graphics package
• BasedontheapprovedWaysideProposal,
identify,gather,andorganizereferenceand
graphicmaterials.
Wayside Exhibit Plan
Guided by the Proposal, reference material,
and graphics package, the planner will
research each exhibit topic and work with
the designer to develop draft wayside exhibit
design layouts that are compiled into a
Wayside Exhibit Plan for review and approval.
Draft Wayside Exhibit Plan
Develop Wayside Exhibit Plan
• Readandreviewreferencesandgraphics.
• Organizethecontent,establishhierarchy.
• Preparedraftinterpretiveexhibittext.
• Createdraftmaps.
• Drawsketchesofnewart.
• Drawsketchesoftactileelements.
• Createdraftlayouts.
Wayside Exhibit Plan review and approval
Procure approved graphics and use-rights
• Secureuse-rightsforthelifeofthewaysideand
documentuse-rightsagreements.
• Acquirehigh-resolutiongraphics.
Develop original art
• Developdetailedsketches.
• Placedetailedsketchesinlayoutandadjust
bothforfit,legibility,size,margins,bleed.
• Developfinalartandgethigh-resolutionscan.
Create maps
• UsewaysideMapGuidelinesandstartermap
filestocreateactual-sizedigitalmaps.
Procure second-language translations
Procure tactile elements
Final Wayside Plan
Assemble final text, photos, maps, diagrams,
and art for park’s final review and approval
prior to production. Any changes to exhibit
elements should be minor at this stage of
exhibit review.
Final Wayside Exhibit Plan
Complete editorial review and make all text
changes to exhibit layouts
• Placesecond-languagetextinlayouts.
Place all final graphics in layouts
• Finalapprovedart.
• Finalapprovedmaps.
• Finalhigh-resolutionphotos.
• Detailpositionoftactileelements.
Final Wayside Exhibit Plan review and approval
• Makeanyminorfinaladjustments.
• Securefinalapprovaltogointoproduction.
Summary Chart(Formoredetailedrequirementsseehttp://www.nps.gov/hfc/products/waysides)
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 27
Section B Wayside Guide | Project Startup
Project StartupThe first few steps of a journey are crucial because they set the direction, pace, and quality of the trip. Several steps listed here can help ensure a successful wayside project. Work done in this first phase will establish a strategy for funding, phasing, and managing the people and resources necessary to develop wayside exhibits.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 28
Get StartedGather Foundation DocumentsGeneral Management Plans, Long-Range Interpretive Plans, Historic Structures Reports, and other planning documents help the project team focus on specific visitor experience goals, and understand relevant park policies and operations. See examples, and find more information about Long-Range Interpretive Plans on this webpage.http://www.nps.gov/hfc/products/ip-lrip.htm
Pick a Strong TeamFind and assess subject-matter expertise. Select experienced media specialists. Decide on a project lead and determine the responsibilities of each team member. Consider how park partners, contractors, and media specialists may contribute. Use this white paper to learn about the many skills needed for a successful wayside team.http://www.nps.gov/hfc/products/waysides/way-team.htm
Wayside Exhibit Development Process
Site Analysis
Project Proposal
Draft Plan
Final Plan
Project Startup
You are here
Section B Wayside Guide | Project Startup
Define the ScopeIdentify wayside needs based on the strengths of the medium. Work with subject-matter experts to select potential wayside sites. Think about what is significant, visible, and accessible in the park. Consider visitor experience goals and what is known about the targeted audience. Will bilingual waysides be required? Understand accessibility requirements. Evaluate the function and condition of existing wayside exhibits. Use the Wayside Guide Section A and the following resources to define the scope of your project.
Interpretive Media Selectionhttp://www.nps.gov/hfc/products/ip-media-select.htm
Checklist To Evaluate Your Wayside Exhibitshttp://www.nps.gov/hfc/products/waysides/way-process-evaluate.htm
Plan for AccessibilityReview the requirements for programmatic accessibility. Choose methods and options for site-specific interpretation and orientation. Refer to the accessibility rules and recommendations on this webpage, including “Department of Interior Section 504 Guidelines for Federally-Assisted Parkand Recreation Programs and Activities”http://www.nps.gov/hfc/accessibility/index.htm
Conduct Front-End EvaluationLearn the characteristics of the targeted audience. Find out what visitors want to know. What questions do they have? What sites do they find most compelling? What important sites do they avoid and why? See examples, and get more information on the following webpage.http://www.nps.gov/hfc/products/evaluate.htm
Establish the FundingDevelop an initial cost estimate for your project and identify a funding source. Understand the limitations and requirements of the funds. This webpage has current information about wayside cost estimating.http://www.nps.gov/hfc/products/waysides/way-cost-estimating.htm
Develop a Project Management StrategyDecisions about funding, schedules, roles and responsibilities, communication channels, and project goals should be carefully determined early on, and be clearly documented in a work plan or other appropriate project agreement. Decide how partner agencies will be recognized before the project gets underway, both to manage expectations and to meet NPS policies.
Begin ResearchFind graphics, objects, artwork, and any maps that may be needed for potential waysides. It is helpful to make copies and put all these images in a notebook, sorted by wayside locations, before the site visit. Be sure to record source information, including copyright and date.
Review Secondary SourcesWhat sources provide a good overview to the content? For project team members new to the subject, secondary sources, like books, magazine articles, or videos, can establish a working foundation. Also review the relevant history section of Historic Structures Reports or Historic Resource Studies.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 29
Before the site visit, the park staff should look for potential wayside locations and site-specific resources. Analyze visitor flow and accessibility issues.
Cost Estimating
For help with cost estimating for NPS projects call Harpers Ferry Center at 304-535-5050.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 30
Section B Wayside Guide | Site Visit
Site AnalysisThe site visit is key to developing successful wayside exhibits. Travel to each wayside location. Choose the best site for each wayside based on considerations listed below. The success of each individual wayside exhibit is directly related to how well these elements work together.
You are here
Startup MeetingInvite all stakeholders to an initial meeting. Review the strengths and limitations of the wayside medium and the wayside development process. Review the goals of the project, the budget and schedule, and clarify team roles. Review the day-to-day site visit schedule, including time to visit local museums and historical societies, and to meet with relevant subject-matter experts. Review the graphic and content resources available like quotes, drawings, photos, or other sources for the team to keep in mind on the site.
Site-by-Site Observe VisitorsObserve and note how visitors use, or ignore, any existing waysides or signs. Note the use patterns at overlooks and on designated trails, unplanned social paths, or tour roads. Are visitors with disabilities avoiding or unable to use current waysides?
Identify the ViewSelect views that enhance the opportunity for visitors to make meaningful connections to the landscape. Note the landscape feature that is the point of focus. Match the direction of view with potential graphics. Take a compass reading and note the site on a map.
Establish the MessageWork for consensus on what exactly is the appropriate interpretive message for each site. Each wayside must be linked specifically to something people can see at the site. Note the relevant interpretive themes at each location.
Major Roles
Park Interpretershares interpretive goals for the project, hosts and guides the wayside team.
Wayside Plannerdocuments potential content, base and panel options. Drafts focused, achievable purpose statements.
Wayside Designerexplores potential graphics, develops thumbnail roughs, and takes site photos, records GPS data.
Wayside Exhibit Development Process
Site Analysis
Project Proposal
Draft Plan
Final Plan
Project Startup
Section B Wayside Guide | Site Visit
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 31
Review GraphicsWhat photos, illustrations, maps, or other images tell the story? It is helpful to have an initial selection of graphics during the site visit. Look for images that convey meanings, provoke thought, or elicit curiosity about the site. As in the example above, look for graphics that match the view from the planned wayside location.
Check Site ConditionsEvaluate each location for safety, accessibility, and comfort. Note landscaping and site improvement work needed. Consider archeological issues and other compliance requirements. Consider long-term maintenance requirements.
Prepare ThumbnailsChoose a panel size and develop pencil sketches on-site. Seeing visual representations of interpretive ideas promotes discussion and clarifies the focus of each wayside. Sketches are good catalysts for refining the thinking and are the basis for developing a wayside layout.
What To Expect Plan to spend about one hour per wayside exhibit. A week is generally enough time to conduct a thorough site visit for a medium-sized project of 20 to 40 waysides.
Section B Wayside Guide | Site Visit
Take PhotosShoot photos in the direction of view of each wayside exhibit, with a marker showing where the base will be installed (above). Geotag site photos to record and map planned waysides. Shoot additional photos to document unique or unusual site or resource conditions.
Choose Panel MaterialTake note of potential vandalism, environmental conditions, relative permanence of the information, and access to the site for installation and maintenance. Choose the most appropriate panel material. Current information about materials is available on this webpage.http://www.nps.gov/hfc/products/waysides/way-product-panels.htm
Choose Base StructureTake note of the landscape conditions and choose the best base style, color, and finish. Gather information needed for custom wayside base construction drawings. Note custom installation needs. Take any critical measurements and photographs, like wall dimensions. Identify existing signs to be removed before new waysides arrive. Current information about materials is available on this webpage.http://www.nps.gov/hfc/products/waysides/way-product-bases-low.htm
Document DiscussionsTake notes on all team discussions reflecting possible interpretive ideas, relevant meanings, reasons for paths-not-taken, and decisions made.
Document wayside locations with GPS coordinates to include in-park GIS data resource files and wayside location map.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 32
Wayside planner takes notes on dicussions and decisions, information that will be documented in the Wayside Proposal.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 33
Section B Wayside Guide | Site Visit
Park and Partner Resource ReviewIdentify resource materials, footnotes and bibliographies, graphics, and artifact collections. Gather references for proposed illustrations and maps. Meet with local historical societies, museums, or other relevant off-site partners. Meet with subject-matter experts to develop and refine wayside exhibit content. It is helpful to dedicate at least one day to research and review materials during the site visit. Some of this work may be necessary before the site-by-site analysis. More research time may be helpful at the end, based on clarification of site visit discussions.
Look for Primary SourcesExamples of primary sources include quotes, diaries, letters, photos, drawings, or inventories from someone who was at the site, or participated in the event. Secondary sources include books or articles written about a site or event by someone who was not a participant. A subject-matter expert can help identify primary sources and verify their accuracy. For example, some of James Taylor’s drawings of Harpers Ferry, published in Frank Leslie’s, were drawn during the Civil War. Others were done in the 1890s from memory.
Review Reference MaterialBased on site visit discussions, identify source material relevant to the wayside content. Read and review material from the correct time period and location. Some of this work may have already been done by park staff. Look for material rich in meanings and site significance.
Gather Source InformationMake copies of potential resources and record enough source information so they can be located and properly acquired when needed. For graphics, record the image source, reference number or title, artist or photographer, size, and reproduction medium (slide, negative, digital file etc.) For written material, record the publication name, source, author, date, and copyright.
Close-Out MeetingSummarize the site visit, decisions made, and any outstanding issues. Review thumbnails and graphic direction for the waysides. Review selected materials and other graphics needed. Discuss custom installation or maintenance issues. Review the schedule and next steps. Review any special site requirements with park maintenance staff.
Common Pitfalls
A common mistake at this early stage of graphics research is to gather images without proper source information. Also, don’t assume that every graphic or resource in a park collection is an original source and in the public domain.
Parkwide Wayside Exhibits
Minidoka Internment National Monument
Wayside Exhibit Proposal
Prepared by
Terry Lindsay
Planner
Chad Beale
Designer
March 2007
National Park Service
Harpers Ferry Center | National Park Service
SubjectEx.
Proposed List
Minidoka Internment National Monument
Proposed Wayside Exhibits
Location SizePanel Material Mount
Excluded People01 Warehouse Area 36 x 48High Pressure Laminate Direct Embed
Hunt Camp—MinidokaRelocation Center
02 Warehouse Area 36 x 48High Pressure Laminate Direct Embed
Bulletin Case03 Warehouse Area 36 x 48Direct Embed
Warehouse Area04 Warehouse Area 36 x 24High Pressure Laminate Direct Embed
Root Cellar05 Root Cellar 36 x 24High Pressure Laminate Direct Embed
Farm Development Program06 Root Cellar 36 x 24High Pressure Laminate Direct Embed
Swimming Hole (CampRecreation)
07 Swimming Hole #1 36 x 24High Pressure Laminate Direct Embed
Anatomy of a Block08 Block 22 36 x 24High Pressure Laminate Direct Embed
Gaman—Perseverance09 Block 22 36 x 24High Pressure Laminate Direct Embed
Shikata gai nai—It Can’t BeHelped
10 Block 22 36 x 24High Pressure Laminate Direct Embed
Creating a Community11 Block 22 36 x 24High Pressure Laminate Direct Embed
Crescent-ShapedCamp/Camp Extent
12 Near Motor Pool Filling Station 36 x 24High Pressure Laminate Direct Embed
1National Park Service | Media Services
Wayside Exhibit Development Process
Site Analysis
Project Proposal
Draft Plan
Final Plan
Project Startup
You are here
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 34
This Wayside Proposal was prepared using the Wayside Exhibit Planner database.
Section B Wayside Guide | Wayside Proposal
Project Proposal A Wayside Proposal defines the project scope of work. For each wayside exhibit there are at least 35 data points recorded during the site visit. Use a database to record and to efficiently manage the data and to prepare detailed cost estimates, base orders, panel orders, site maps, and installation plans.
Data Needed for Each WaysideExhibit NumberSubjectPurposeViewCommentsPotential GraphicsPotential MapsPotential Illustrations
General LocationSpecific LocationGPS CoordinatesSite PhotoOrientationAccess IssuesSite Prep IssuesPanel SizePanel MaterialDuplicates Needed
Duplicate NumbersInstallation NotesInventory NotesBase CategoryBase StyleBase ColorBase MaterialBase AngleBase MountAncillaries
Panel CostsBase CostsAncillary CostsGraphics CostsIllustration CostsMap Costs
Prepare the ProposalGather most of this data during the site visit. In the weeks following the site visit, the team will review decisions, refine the data and thumbnails, make a wayside location map, and prepare the Wayside Proposal document for review and approval.
Major Roles
Wayside Plannerwrites a project summary, records all data, and prepares the Wayside Proposal.
Wayside Designerrefines thumbnailsand identifies what graphics are needed.
P A N E L & B A S E
06 Farm Development ProgramP U R P O S E
Open farm lands
Near the south end of the Root Cellar, facing toward the formerWRA farm fields
High Pressure Laminate
Panel Material
None
Reverse Angle
Color
45 degreesAngle
Direct Embed
Mount
Ancillaries
East-Northeast
36 x 24
Panel Size
06
Root Cellar
E X N U M / S U B J E C T
Exhibit touches on GMP theme categories: People, Place, and World War II.C O M M E N T S
MARCH, 2007 | WAYSIDE EXHIBITMinidoka Internment National Monument
Category Base Material
Weathering Steel
Hardware Notes
National Park Service Harpers Ferry Center
V I E W
M A P S L O C A T I O N
To describe how Minidoka internees, in just a few years, transformed thousands ofacres of sagebrush lands into productive farm lands, harvesting 7,300,000 pounds ofproduce in 1944, making the camp fully sustainable. To explain how internees grewVictory Gardens, as did millions of Americans, to ease the burden on wartime foodsupplies.
G R A P H I C C A T E G O R I E S
• Historic Photograph
Minidoka Interlude Snapshots
P O S S I B L E G R A P H I C S
S I T E P R E P A R A T I O N
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 35
Section B Wayside Guide | Wayside Proposal
A single page like this defines each proposed new wayside exhibit.
Purpose and content
Location and site data
Multiple thumbnails show options for the layout. They identify graphics needed and show the visual intent of each wayside.
Base and panel choices
Review and ApprovalAsk all stakeholders—including park managers—to review the Wayside Proposal. Once team members reach consensus and all changes are incorporated into the draft Proposal the park manager signs off, laying the foundation for the next stage of work, the Wayside Exhibit Plan.
Content Review: Park interpreters review the Wayside Proposal by focusing on the purpose of each wayside, and considering how graphics (i.e., photographs, illustrations, and maps) will be used to serve that purpose. Remember that any new graphics will require money and time to research, create, and review.
Technical Review: Resource management, facilities and maintenance staff review the Proposal by looking at the material choices for each wayside, to be sure they understand the maintenance and installation requirements for proposed waysides. They review landscaping recommendations for safe access, like rerouting trails, pouring concrete pads, and clearing and maintaining vistas. They can begin planning installation needs for equipment, compliance, and labor and materials.
What To Expect Depending on the size of the project, and schedules of the team, reviews can take from one week to one month.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 36
Section B Wayside Guide | Wayside Proposal
What makes a good purpose statement?Each wayside needs a straightforward purpose statement that defines the interpretive goal. Purpose statements describe how the wayside will connect visitors to the audience-relevant meanings and significance of a site. They are the foundation for all work that follows. A poorly focused purpose will cause false starts and delays during wayside development.
Focus on One Interpretive OpportunityWaysides work best when they have a single, site-specific interpretive opportunity. Avoid overloading this teachable moment. Don’t expect too much for 30–45 seconds of the viewer’s attention.
Visual ReferenceIf the purpose statement sounds more like a book or movie description, it is probably too complex. A good wayside purpose statement describes a goal that can be accomplished with a bold graphic presentation.
Not a Theme StatementBroad park interpretive themes are not specific enough to serve as goodwayside purpose statements. Good waysides are built on stories locked toa place with a particular view. Key park themes can be woven into mostwaysides. But do not plan waysides based on interpretive themes alone.
Clear and SpecificPurpose statements should use clear, specific language in measurable terms. Start with infinitive action verbs like “To describe..., to link..., to illustrate..., to reveal...” Workable, practical purpose statements do not arrive instantaneously. Plan to invest time and thought to get them right.
Five Examples of Good Purpose Statements
Low-Profile WaysidesTo show and describe how Brown’s Chapel [in view] was first a physical focal point, and later a symbolic focal point, as the headquarters and refuge for mass meetings and organizing during the 1965 Civil Rights march demonstrations.
To reveal the tapestry of life through historic use of the site. To describe how John Herrmann’s 128-acre farm was situated on former relocation center land where one of Minidoka’s fire stations, a water tower, sewage treatment plant, Blocks 21 and 22, and parts of other blocks were located. To identify remaining fire station and barrack buildings [in view] that became farm outbuildings.
To illustrate how plants, animals, and humans all share the rich tidal zones of Bartlett Cove [in view], highlighting the harbor seal, river otter, and other animals in the intertidal environment. To explain how humans must be careful of their influences on the tidal environment.
Orientation WaysidesTo briefly inform visitors of the significance of this area as the first federal tree reserve in the United States and to orient them to the facilities in the area like the visitor center, picnic pavilion, camping area, and trails.
To mark the trailhead and provide trail information and safety tips. To interpret the subtle changes in elevation and plant life along the trail so that visitors can read the landscape as they enjoy the trail.
Section B Wayside Guide | Wayside Proposal
Wayside Exhibit Planner DatabaseThe advantages of using a database to manage your wayside project are many. Input the size, style, material, location, and other information once to be able to quickly and accurately generate panel orders, cost estimates, or lists, like new illustrations or maps.
Wayside Exhibit Planner database entry screen
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 37
Wayside site map
Other Wayside Proposal ElementsThe Wayside Exhibit Proposal should also include accessibility information and site-location maps.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 38
Section B Wayside Guide | Draft Plan
Research and Graphic AcquisitionGraphics and reference gathering is done before, during, and after the site visit. Upon park approval of the Wayside Proposal additional material is gathered. The planner and designer read and review these materials to develop wayside text and layouts.
GraphicsPhotographs, illustrations, maps, and documents like newspapers, are examples of graphics that can tell a story of the landscape. Many parks have large collections of site-specific graphics, but most wayside projects require images from other sources too.
SourcesIn addition to park collections, good public sources of graphics include the Library of Congress, National Archives, Smithsonian Institution, portrait galleries and museums, historical societies, and libraries. Commercial sources include stock houses, private collections, and professional photographers. International sources include museums, libraries, art galleries, historical institutes, and universities.
Use-RightsGet written permission from the owner of the graphic to use it for the life of the wayside and pay the negotiated fee before using it. Keep use-rights and image-use permission letters for the life of the wayside. Other important records include image orders, purchase requests, cleared checks, receipt of property, facsimiles of images, invoices, receipts, and license agreements.
Major Roles
Researcherresearches and gathers reference material
Graphics Researchercontacts outside sources, orders graphics, negotiates use-rights and fees, acquires images and permission letters, documents agreements, purchases images, and archives all records.
Park Interpretergathers park materials
Wayside Designerreviews the quality of potential graphics and researches other possible sources.
Section B Wayside Guide | Draft Plan
Record Source InformationGather image data for each graphic proposed for use on the wayside exhibits.The example above lists the kind of data needed for each image.
Photo Release FormUse a release form for new images that include recognizable people.http://www.nps.gov/hfc/products/waysides/way-graphics.htm
Credit LinesTo reduce clutter, avoid adding credit lines on waysides. Negotiate use-rights agreements that do not require the use of credit lines. Archive credit information with project records.
Graphic RequirementsLarge-format wayside graphics have different technical requirements than other media like the web or offset printing. A graphic must meet these technical quality standards to reproduce well. Refer to the following document to learn more about wayside graphic requirements.
Standards for Digital Image Fileshttp://www.nps.gov/hfc/products/waysides/way-graphics.htm
Research and ReferencesThe researcher gathers reference and source materials and organizes it by exhibit. With a good working knowledge of the material, the researcher sifts through and highlights site-specific stories and ideas guided by the Wayside Proposal purpose statements.
What To Expect The average time to get images from sources inside the United States is at least four weeks, often months. International orders can take from two to six months. One missing graphic can delay a wayside project from moving into final review and production.
6/29/20098:13 AMPage 1Image Info
Alligator
1/26/2007
Image Name Alligator
Date Taken 1/1/1990
Artist Tom Gray
Description Three-quarter side view of an alligator at
water's edge.
Negative Id # GUIS-001-02
Wayside Exhibit # GUIS001
Acquisition Cost $0.00
Notes onAvailability
Maximum Time Frame
Image Is AvailableAs needed
Format 2 1/4 x 2 1/4 transparency
Size 8x7
Collection Harpers Ferry Center Audiovisual Arts
Location Data
Source
Street P.O. Box 50
City, State &Zipcode
Harpers Ferry WV 25425
Phone 304-535-6478
Req'd Lead Time On
Image Acquisition Three weeks
Contact Person Mary Ann Kave
Phone 304-535-6478
Email [email protected]
Dept Media
Image is currently used in the slide show
at the park visitor center.
File name
File path
Copy of the image
Negative or identification number
Description of image
Wayside exhibit number for which the image is needed
Acquisition cost for one-time use for the life of the exhibit
Format or medium
Original size
Size of reproducible needed
Required lead time on acquisition of image
Source of the original with address and name of collection
Contact person or department
Telephone number
E-mail address
Owner of the graphic
Copyright data
Photographer or artist
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 39
Section B Wayside Guide | Draft Plan
Wayside Exhibit PlanWayside panels begin as full-size layouts with draft text and proposed graphics. Through a process involving many stages of development and review, they become final production files. The rest of this section describes the major stages of design and writing and the supporting work to create art, maps, and tactile elements.
Create Panel LayoutsGood writing and design are based on a clear interpretive hierarchy. Organize ideas and images into primary and supporting roles. For example, a wayside that interprets a glacial landscape might also include a preservation message. Those two topics, geology and preservation, should lead to a layout that shows one topic as primary and the other as supporting.
DesignThe panel layout is based on the thumbnail rough and panel size approved in the Wayside Proposal. The first graphics placed in the layout may be low-resolution, or draft illustrations. Draft text, title, captions, and labels are added to the layout with the appropriate typographic treatment. Even as a draft, the layout should present the intended style and composition. The next seven pages address wayside exhibit design.
WritingText must connect with, support, and enhance the images and landscape visitors will see. The first draft is based on the approved purpose statement, thumbnail rough, selected graphics, and site features. It can be written directly into the layout, or it can be written with the layout in mind. Pages 48 through 52 address some challenges of wayside writing.
Kenai Fjords National Park National Park ServiceU.S. Department of the Interior
April 2008Ten Wayside Exhibits (1-10)
Exit Glacier Wayside ExhibitsPlannerDavid Guiney
DesignerBetsy Ehrlich
WriterAmy Ireland
Harpers Ferry Center
Layouts are designed at actual size and printed at 11x17 for review.
You are here
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 40
Wayside Exhibit Plan Cover
Major Roles
Wayside Plannerstudies text references and graphics, writesdraft text, and guides team reviews.
Wayside Designerstudies text references and graphics, makes draft layouts, and plans new art and maps.
Illustratorcreates new artwork.
Cartographercreates new maps.
Graphic Sourcesprovides images.
Park Interpreterconsolidates park review comments.
Wayside Exhibit Development Process
Site Analysis
Project Proposal
Draft Plan
Final Plan
Project Startup
Section B Wayside Guide | Draft Plan | Design
Design with a GridWayside grids are presized Adobe InDesign® files with built-in type styles and appropriate NPS identity elements. They include the correct bleeds and margins for fabrication and installation in a full-frame NPS base. Go to this webpage to download the grids, typographic standards, and other standards, or see a video on using the grids.http://www.nps.gov/hfc/products/waysides/way-grids.htm
Scale and ProportionThe column guides visible inside the margins serve as reference points, not as the strict formatting guides that might be found in a newspaper or magazine. They help with text line length, inset photo dimensions, and analyzing proportions and spacing. Waysides are generally bigger than even the largest computer screens, so layouts are viewed at a smaller scale. The grid helps the designer achieve appropriate scale, proportion, and consistency for the typical two- to three-foot viewing distance of a wayside exhibit.
Architecture of the LayoutThe grid rarely determines the layout of the wayside panel. Rather, the composition of the main image, or the focus of the largest graphic determines the panel layout. The title in the upper left corner of the grid is there for starter purposes only and is not locked in place.
Typographic Styles in the GridEmbedded in the National Park Service grids are typographic or paragraph styles (see above) that contain specifications for type size, leading, and hyphenation. These specifications maximize legibility and are set to the proportions of each grid.
Wayside Typographic StandardsLegibility is the goal of the wayside typographic standards. Point size is one of the many aspects of typography that the designer needs to address. The typographic standards are developed in concert with the wayside grids to help designers create legible text. Download the standards from the link above.
NPS TypefacesTypography is an important component of the NPS graphic identity standards. These standards specify two typefaces: NPS Rawlinson and Adobe Frutiger. To learn more, visit this webpage.http://www.graphics.nps.gov/typefaces.htm
Did You Know?
In 1990 graphic designer Massimo Vignelli developed a “Guidelines and Standards Manual” for National Park Service Wayside Exhibits.” The Manual included a wayside grid based on the “Unigrid” developed for National Park Service publications. The grid was updated for the 2001 Graphic Identity Program, and the 2006 UniGuide Sign Program.
column guides
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 41
Original 1991 Grid
Paragraph Styles paletteJune 2008 Grid
Did You Know?
NPS Rawlinson was designed in 2000 based on requirements established by the National Park Service.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 42
Section B Wayside Guide | Draft Plan | Design
Wayside Design: How is It Different? Several things make wayside design different than other media design.
Compelling FocusSelecting and developing compelling graphics can be the biggest challenge in wayside design because wayside graphics must attract visitors. The graphics should relate directly and obviously to the landscape in view and tell a story. They must grab attention and spark an immediate connection. Align the title and main text to enhance the focus of the main image.
Designing for the LandscapeAn effective wayside will lead the eyes and attention from the wayside to the landscape. The designer must consider the direction of the view and the fact that visitors cannot turn the sign around.
Visual LayeringPeople may look at a wayside for three seconds or three minutes. The average is 45 seconds. Wayside exhibit design should have a clear focus and hierarchy so the viewer who spends only a few seconds gets the main idea. Give those who take more time some details worth pondering. Many of the details should be in the images.
It is Outdoors. Why Does This Matter?The designer must consider outdoor conditions like sunlight, glare, and the viewing distance. Large areas of white on a wayside exhibit are hard to look at in bright sunlight. Use neutral colors and avoid bright colors used over large areas. Lighting outdoors is variable. Design text with good contrast.
Designing for Large FormatWayside exhibits are generally viewed from two to three feet away. Panel sizes and the scale of graphics should reflect this. Too large, and viewers feel like they are in the front row of a movie theater; too small, and the graphic impact is lost. Print layouts actual-size to check scale and proportion.
Not a BookWaysides are more like billboards than publications. They attract attention quickly, with impact, and with a single memorable message. The best wayside exhibit facilitates a powerful and immediate connection to the landscape.
Sequoia National Park Mount Rainier National Park
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 43
Section B Wayside Guide | Draft Plan | Design
Florissant Fossil Beds Case Study
Compelling FocusThe main graphic is the same in both panels at right. But the bottom panel shows how an image can be adjusted to create visual focus on the area of interest—in this case, a fossil layer. The first and most powerful element in any wayside is the immediate message of the title and main graphic. In the top panel the message is hidden in the text and inset graphics. The bottom panel is more effective because the descriptive title is close to the visual and interpretive focus of the images. Three seconds vs. 30, billboard vs. publication.
Visual LayeringThe top example’s mix of horizontal and vertical elements in the hard- and soft-edged boxes creates visual noise. The boxes also obscure the main image and compete for attention. The bottom example emphasizes the relevant layer of the large graphic and makes all other elements compatible with its horizontal direction.
Subject Title vs. Interpretive Title“Shale Outcrop” is a subject title. It doesn’t convey the intended meaning in “Hidden Treasures.” Placing the title “Hidden Treasures” beneath the rock layer of hidden treasures enhances both image and title. It is both title and image label.
Not a BookIn the top example the idea of hands splitting shale to reveal fossils is an inset with separate text, caption, and redundant photos. In the bottom example a single larger graphic conveys the same idea, but it also connects visually to the primary graphic and text.
Starting PointAlthough the top layout uses the classic location for title and text in the upper left corner, the result disconnects it from the visual focus. The bottom layout creates a clear visual starting point by bringing together the focal point of the main graphic with the title and main text.
Architecture of the ImageThe flat architecture of the main graphic in the top example lacks dynamic lines of focus. In the bottom example, darkening the main image to focus on the fossil layer sets up a strong horizontal architecture that is supported by the horizontal alignment of text and inset images.
Gallery of ExamplesVisit this website to see other examples of NPS wayside exhibits.http://www.nps.gov/hfc/products/waysides/way-samples.htm
Did You Know?
Minimal text and visual clarity are particularly important for visitors with cognitive and learning disabilities, as well as those with low vision.
Section B Wayside Guide | Draft Plan | Design
National Park ServiceU.S. Department of the Interior
Florissant Fossil Beds National Monument
Shale OutcropThe hillside in front of you contains thousands of tiny, fragile fossils of insects and leaves. The fossils are hidden between layers of light gray rock called shale. The shale was formed at the bottom of an ancient lake that once existed in the place
Splitting Shale
where you now stand. Plants and animals that died in or near the ancient lake settled to bottom where they were buried in layers of clay and ash. Eventually, the layers hardened into rock and the plants and animals became fossilized.
To find fossils, scientists must carefully
split the shale open. Sometimes it splits
by hand and sometimes tools are used.
Types of fossils found in the shale
36 X 24 INCHES | 40% OF ACTUAL SIZE | MONTH 2001 | PARK NAME | Wayside Exhibit 00Before
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 44
After
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 45
Section B Wayside Guide | Draft Plan | Design
Grand Canyon–Parashant Case Study
Compelling FocusThe main graphic in the top example (right) is the same view as the visitor will see from the wayside location. The main graphic in the bottom example shows the dramatic effect the lava had on the landscape. It adds perspective to the story by highlighting the visitor’s location (You Are Here) in an aerial perspective with a graphic arrow that shows the location and direction of the lava flow. It broadens the view
Visual LayeringIn the top example, there is only one layer of information. The graphic does not tell a story, the story is presented only in the main text. In the bottom example, the title introduces the story, the main graphic suggests a dramatic event with the transparent arrow, two inset diagrams show geological change on the landscape, and labels and captions offer more supporting details about basalt and flooding.
Subject Title vs. Interpretive TitleThe title “Whitmore Canyon,” a place name, doesn’t express the idea of a changing landscape. What is it about Whitmore Canyon that warrants a wayside exhibit? It is the significance of massive geologic change. The title “When Lava Choked the Colorado” introduces that story.
Not a BookThe main text in the top example begins with a definition of basalt. It attempts to tell the whole story and uses scientific jargon. In the bottom example the main text is more succinct because the graphics tell much of the story. Rather than describe the lava dam in so many words, the bottom example shows the lava flow, the dam, and temporary lake. And to spark interest, the text begins with a powerful, site-specific, first sentence, “You are standing on remnants of a failed 180,000-year-old dam.”
Gallery of ExamplesVisit this website to see other examples of NPS wayside exhibits.http://www.nps.gov/hfc/products/waysides/way-samples.htm
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 46
Section B Wayside Guide | Draft Plan | Design
36 x 24 inches | 40% of actual size | april 2008 | Grand canyon-parashant national MonuMent | Wayside Exhibit 05
Grand Canyon-Parashant National Monument Bureau of Land ManagementNational Park Service
U.S. Department of the Interior
Whitmore CanyonThe black jagged rock in front of you is basalt, a common type of volcanic rock that formed as molten lava cooled. At least thirteen times during the last one million years, lava from the Uinkaret volcanic field to the north, flowed down valleys and changed the flow of the Colorado River.
You are standing on a 177,000-year-old lava flow. Molten lava spewed from at least two volcanic vents, which are now covered by cinder cones in Whitmore Wash. The lava flowed south down Whitmore Canyon and entered the
Grand Canyon at this location to form a massive dam. Over time, water built up behind the dam, which may have lasted up to 20,000 years. The lava dam eventually failed, sending a wall of water 600 feet high down the river and depositing massive boulders of basalt up to 115 feet in diameter on benches well above the modern Colorado River.
Before
After
Section B Wayside Guide | Draft Plan | Design
Common Pitfalls in Wayside Design
Too Many Colors and StylesLayouts with many elements (text, graphics, colors, typographic styles, decorative elements) may be fine for web pages or magazines, but not waysides. Visitors quickly scan waysides for information and inspiration, unlike book pages on which they may study the materials. Clarity and focus help prevent readers from rejecting a wayside.
Too Many Little PicturesWaysides cannot replace guidebooks or field guides. Visitors cannot visually memorize a multitude of small images on a wayside.
Long Line Lengths and Small TextReading text while standing outdoors is not like sitting in a comfortable chair with a book. Typography for wayside exhibits requires careful attention to appropriate line lengths, point sizes, line spaces, and contrast to be legible for an audience that will vary in height, visual ability, and types of corrective lenses. Waysides like those shown above make reading hard work.
Trying To Tell the Whole StoryWaysides can provoke interest and help visitors make a connection to the landscape, but they are not a good medium for telling complex stories that occur in multiple stages over long periods of time.
Too Many LogosLogos convey the authority of the message, but too many can overwhelm the purpose and dilute the focus and authority. Logos benefit the wayside creator more than the wayside user. Err on the side of helping visitors enjoy an experience. Use logos with restraint. Find other ways to recognize donors and partners. Review the NPS Partnership Identity document.http://www.nps.gov/hfc/products/waysides/index.htm
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 47
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 48
Section B Wayside Guide | Draft Plan | Writing
Writing for Wayside Exhibits Start with a place. Tell a short, engaging story. Leave readers wanting more. It sounds simple, but space is limited and the audience fleeting. Visitors may linger at a wayside for 45 seconds or less. Can something of value be read in that short time? Wayside text must connect with, support, and enhance the images and landscapes visitors see.
Stay Connected with the ViewDo not take it for granted that readers will automatically understand the link between the story and the place where they are standing. Make sure they do.But be careful not to describe what they can see readily with their own eyes.
The Most Powerful SentenceMany writers find they need to work up to the heart of the matter, like a diver bounces on a diving board. It may take one, two, or three sentences to get there. After writing draft wayside text, find the best sentences. Try them out as the first sentence instead of leaving them in the middle or at the end.
Use the Active VoiceWeed out passive voice, and use short, active verbs. Keep the story moving. Use common language. Look for ways to replace longer words derived from Latin or Greek with basic plain English. For safety rules on trailhead waysides, stick with direct, simple Do’s and Don’ts. Don’t dance around the subject.
How Many Words?There is no one right answer to this question. Raw word counts vary for the many different sizes of waysides. An 18x18 can support far fewer words than a 36x48. A better measure is to get a stopwatch and have someone read draft wayside text out loud. Are the key ideas conveyed in less than 45 seconds? Did the reader stumble on hard-to-pronounce or not widely known words? If so, strike them out and rewrite.
Put Text into HierarchiesAll wayside text is not created equal. Keep key thoughts in main text blocks, and supporting details in captions or labels. Some visitors only read the title and look at the main graphic. Others read the main text and some captions. A few read it all. Sometimes ideas that started out in the main text find a better fit as a sidebar or a caption. Sometimes a phrase can be cut out of main text and put to work as a direct label on an image. Keep each element focused.
Get Feedback and Edit, Edit, EditCompose the first draft. Compare it to the purpose statement. Read it in the context of the layout and a photo of the site. Get feedback from other writers, interpreters, and general-knowledge-only readers. Rigorously cut away everything that can be eliminated. The craft of writing good waysides depends as much on subtraction as on creativity.
The “So-What?” TestGood wayside writing will help people discover something meaningful and worth the interruption. Why should they care? Look for hidden relationships. Find an angle of interest, a way to help visitors see what can’t be seen. Write for the reader’s benefit, not for your own pleasure or sense of what people ought to learn. Think about the visitor’s sense of place and address the moment of curiosity, the questions inspired by the place
Two great American writers said it best.
“If I had more time, I would have written a shorter letter.”T.S. Eliot
“There was never a story so good that it could not be improved upon.”Mark Twain
Did You Know?
These guidelines for wayside writing are particularly important for visitors with cognitive and learning disabilities.
Section B Wayside Guide | Draft Plan | Writing
Common Pitfalls in Wayside Writing
Avoid Subject TitlesAvoid subject titles like “Geology” or “Plants.” Write titles to reveal the significance of the story, like “Wheels to Wings” or “River on the Rampage.” An effective title linked to a compelling image can pull people into the story. Try a hook, a surprise, or a play on words to engage interest. Don’t just label something, choose words that deliver meaning.
Don’t Let Data OverwhelmConflict, mystery, and surprise keep people engaged. Too many facts or complicated scientific processes will turn them away. A wayside is not a book. Write more like haiku and less like term papers.
Avoid Jargon and BuzzwordsWrite for a general audience. Question whether words and phrases will be understood by people not familiar with government terms or terms used by subject-matter specialists. Leave out buzzwords like “natural and cultural resources” or “front-country.” Jargon confuses. Buzzwords become dated, bureaucratic, and flat. Write in plain, basic English. Avoid repeatedly referring to the site as “the Park.”
Don’t State the ObviousThis happens when writers have to work up to a good idea or write the way they normally speak. Weed out habits of speech that creep into writing that may lead to redundancies. An example would be the expression “for all intents and purposes.”
It is Not a Ranger TalkInformal conversations have conventions of speech and common courtesy. On a wayside with a time crunch to connect with the reader, don’t waste time or space to say “Welcome to Big Beautiful National Park.” Make every phrase work to connect and to convey significance. Avoid clauses of casual speech.
Avoid a Sales PitchTravel books and airport posters induce people to come see a site. With waysides the person is already there. Save limited text for revealing what makes this place significant and meaningful.
Information or Interpretation?Make sure the writing style and content support the wayside exhibit’s purpose and intended outcomes. Understand the difference between presenting information and interpretation. For guidance on interpretation, review this 24-page Interpretive Foundations document.http://www.nps.gov/idp/interp/101/foundationscurriculum.pdf
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 49
Too many words.
Common Words?
Consider word choice carefully. Which phrase would you use?
“shroud of snow”“blanket of snow”“a foot of snow”“snow cover”
Section B Wayside Guide | Draft Plan | Writing
Example of Good Wayside Writing
City of Soldiers
In early March 1862, these now quiet fields bustled with the clamor and constant motion of an army headquarters in time of battle. Soldiers drilled, cleaned guns, and checked ammunition. Scouts and couriers rode in to report. Officers convened for councils of war. Mules brayed and teamsters swore. Teams pulling wagons and artillery rattled by.
Here, across the road from Samuel Pratt’s store, decisions were made that would determine the fate of two armies—and the state of Missouri. A temporary city of soldiers covered the field before you and the surrounding area. Here you would have seen the nerve center of the Union army during the two-day fight for Pea Ridge.
There was heavy military traffic along the Telegraph Road that now lies in part under the battlefield tour road behind you.
Caption
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 50
City of Soldiers In early March 1862, these now quiet fields bustled with the clamor and constant motion of an army headquarters in time of battle. Soldiers drilled, cleaned guns, and checked ammunition. Scouts and couriers rode in to report. Officers convened for councils of war. Mules brayed and teamsters swore. Teams pulling wagons and artillery rattled by.
Here, across the road from Samuel Pratt’s store, decisions were made that would determine the fate of two armies—and the state of Missouri. A temporary city of soldiers covered the field before you and the surrounding area. Here you would have seen the nerve center of the Union army during the two-day fight for Pea Ridge.
There was heavy military traffic along the Telegraph Road that now lies in part under the battlefield tour road behind you.
36 X 24 INCHES | 38% OF ACTUAL SIZE | FEBRUARY 2006 | PEA RIDGE NATIONAL MILITARY PARK | Wayside Exhibit 02
National Park ServiceU.S. Department of the Interior
Pea Ridge National Military Park
Title
Main Text
Pea Ridge National Military Park
Section B Wayside Guide | Draft Plan | Writing
Example of Good Wayside Writing
Frequent Fire
Many fires created the large scar on the sequoia in front of you. Frequent fire is common in good sequoia habitat, and mature trees have ways to survive. Most large sequoias survive fire and live well despite large scars.
Thick bark with many air pockets insulates the wood from heat. With little sap or pitch in it, the bark is not very flammable. High branches hold foliage well above most fires. With competing plants burned away, surviving trees get more water, nutrients, and sun.
New wood grows from either side of a fire scar, covering a little more each year. This healing growth leaves telltale marks on the tree’s annual growth rings. These marks reveal how many fires a tree has survived.
A fire worker examines the base of a large fire scar. A typical sequoia here might have survived several fires each century.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 51
Title
Main Text
Caption
Caption
Sequoia and Kings Canyon National Parks
Spanish Style Guide February 2008
Guidelines to help park rangers, interpreters, editors, and translators working on Spanish language versions of National Park Service interpretive media
Developed during translations of park brochures (and other publications) for Biscayne, Castillo de San Marcos, Dry Tortugas, Everglades, Pinnacles, Saguaro, San Juan, and Whitman Mission; translations of film scripts for Cabrillo, Castillo de San Marcos, and San Juan; and translations of wayside exhibit texts for Big Bend, Biscayne, Carlsbad Caverns, Dry Tortugas, Everglades, Grand Canyon, Guadalupe Mountains, Indiana Dunes, Joshua Tree, Juan Bautista de Anza Trail, Organ Pipe, Palo Alto National Battlefield, Salinas Pueblo Missions, San Antonio Missions, San Juan, Sequoia-Kings Canyon, and Timpanogos Cave.
Table of Contents: 1. Guiding Principles – Degree of literalness desired, dialects, and design parity 2. Capitalization Rules that differ between Spanish and English
2.01 Days of the week, months - lowercase in Spanish
2.02 River and mountain ranges names - lowercase in Spanish
2.03 Tribal or national names – lowercase in Spanish
2.04 Titles of books, waysides – lowercase after single initial capital
3. Grammar Issues to Decide (alphabetical listing)
3.01 Command forms for verbs
3.02 Formal or informal YOU, Singular or Plural
4. Punctuation Rules that differ between Spanish and English
4.01 Comma use in sequences of three or more
4.02 Initial question marks, exclamation points,
4.03 Vowels with accents
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 52
Section B Wayside Guide | Draft Plan | Writing
Tools and Resources for Wayside Writers
Reading LevelHow challenging is it to read wayside text? Use Microsoft Word to check the readability of draft text. The proofing tool analyzes text and reports a level-of-effort score (shown below). It checks for wordiness, jargon, sentence structure, passive sentences, and many other aspects of grammar and style. Wayside text should score no higher than 8–10 on the Flesch-Kincaid scale.
Effective Interpretive Writing TEL broadcast 2008-05-09Veteran HFC writer-editor Ed Zahniser gives a concise, hard-hitting talk on interpretive writing for a 2008 TEL (Technology Enhanced Learning) broadcast. This 20-minute video is packed with good ideas on interpretive writing.http://www.nps.gov/hfc/products/waysides/way-process-writing.htm
Editorial Style GuideWords and how we use them change over the years. Is it better to say Native American” or “Indian?” Is it “buffalo” or “bison?” This Style Guide lists preferred word choices for NPS media products. Use the Style Guide to speak with a consistent voice and help avoid reader confusion. For general writing reference books, see the list on the front page of the Style Guide. For park-specific editorial style, create your own Section D of the Wayside Guide.http://www.nps.gov/hfc/products/waysides/way-process-writing.htm
Bilingual WaysidesVisit this webpage for general recommendations for bilingual waysides.http://www.nps.gov/hfc/products/waysides/way-process-language.htm
Spanish Style GuideThe Spanish language has different rules than English. Specific solutions used during translation and interpretive editing of many NPS sites’ Spanish-language waysides and publications are listed in this document.http://www.nps.gov/hfc/products/waysides/way-process-language.htm
“
Editorial Style Guide
Spanish Style Guide
Readability Levels4 Hemingway6 Mark Twain8 Readers Digest8–10 Most Popular Novels10 Time, Newsweek12 Typical Insurance Policies15–20 Academic Papers
Ideally, wayside writing is level 8.
Visit the HFC web site to read some good examples of wayside writing. http://www.nps.gov/hfc/products/waysides/way-samples.htm
Section B Wayside Guide | Draft Plan | Review
Wayside Exhibit Plan Review and ApprovalReview the plan on site and evaluate each wayside as a first-time visitor would see it. Formative evaluation is recommended at this stage by placing full-size mock-ups in their intended locations. Review for programmatic accessibility. All stakeholders should review the Wayside Plan, but the park staff is responsible for compiling and consolidating all comments.
Things To ConsiderConsider the best approach to resolve differences in opinions and ideas between and among reviewers. In some cases, it is best for the park staff to come to consensus, consolidate comments, and provide clear direction to the planning and design team. Sometimes the planners and designers are included in the discussions. Either way, strike a balance between giving highly specific directions and asking for open-ended discussions.
Review in the conference room or office is common (above), but ideally, waysides are reviewed in the setting in which they will appear (left). Though this may not always be possible or practical, referencing the site photos and original purpose statements in the approved Wayside Proposal will keep the review focused and prevent backtracking.
Try to keep from bogging down on matters of style or wordsmithing. Check to be sure the facts are correct and that the editing process has not distorted accuracy or meaning. Check image labels and captions for accuracy. Be sure the selected graphics are appropriate. Check draft maps for labels, features, geographic area, hierarchy, and focus. Look for consistency between map labels, text, and graphics on each wayside, and among all layouts in the project. If the text was written in-house, ask someone other than the author to review and edit it.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 53
Section B Wayside Guide | Draft Plan | Illustrations
Creating New IllustrationsSometimes there are no photographs, existing illustrations, or other graphics that can help explain the significance of a site. Although a new illustration will require an investment of time and money, it will reveal significant meanings, relationships, and details to visitors, and may also help park staff gain greater insight into the subject. Art for waysides must be place-specific so visitors can easily compare it to the actual landscape.
Reference PackageArtists need details and direction. Organize a comprehensive reference package. Understand what is known and consider how to handle unknowns. If possible, the artist should visit the site.
Thumbnails show basic content, focus, perspective, and general composition within the wayside exhibit panel.
You Are Here
Killing Fields At first light on June 3, 1864, more than half of the Army
of the Potomac rushed forward across a wide front.
Theirs was a high stakes gamble. The risk: a frontal
attack against well fortified Confederate defenders. The
reward: the potential to drive Robert E. Lee's army into
Richmond National Battlefi eld Park National Park ServiceU.S. Department of the Interior
the Chickahominy River. On the Confederate right a brief
breakthrough produced hand-to-hand fighting. In the center
the attackers barely left the cover of their trees. On the left
brave soldiers charged across open ground, only to fall by the
hundreds. The Confederate line stood unbroken.
“The men bent down as they pushed forward, as if trying…to breast a tempest, and the files of men went down
like rows of blocks or bricks pushed over by striking against each other.” John L. Piper, 12th New Hampshire Infantry
Full-color rendering is developed, reviewed and corrected for accuracy, fit within the wayside layout, color reproduction quality, and to ensure consistency between text and art.
Killing Fields At first light on June 3, 1864, more than half of the Army
of the Potomac rushed forward across a wide front.
Theirs was a high stakes gamble. The risk: a frontal
attack against well fortified Confederate defenders. The
reward: the potential to drive Robert E. Lee's army into
Richmond National Battlefi eld Park National Park ServiceU.S. Department of the Interior
the Chickahominy River. On the Confederate right a brief
breakthrough produced hand-to-hand fighting. In the center
the attackers barely left the cover of their trees. On the left
brave soldiers charged across open ground, only to fall by the
hundreds. The Confederate line stood unbroken.
“The men bent down as they pushed forward, as if trying…to breast a tempest, and the files of men went down “The men bent down as they pushed forward, as if trying…to breast a tempest, and the files of men went down
like rows of blocks or bricks pushed over by striking against each other.”like rows of blocks or bricks pushed over by striking against each other.” John L. Piper, 12th New Hampshire Infantry
42 X 24 INCHES | 38% OF ACTUAL SIZE | DECEMBER 2008 | RICHMOND NATIONAL BATTLEFIELD PARK | Wayside Exhibit 053
Sketches are reviewed and refined in multiple stages to establish accurate detail, exact dimensions, compelling composition, and a good fit within a wayside layout. The sketch leaves space for text.The artist must take into account the necessary margins, bleeds, and frame overlap of the wayside hardware.
You Are Here
Killing Fields At first light on June 3, 1864, more than half of the Army
of the Potomac rushed forward across a wide front.
Theirs was a high stakes gamble. The risk: a frontal
attack against well fortified Confederate defenders. The
reward: the potential to drive Robert E. Lee's army into
Richmond National Battlefield Park National Park ServiceU.S. Department of the Interior
the Chickahominy River. On the Confederate right a brief
breakthrough produced hand-to-hand fighting. In the center
the attackers barely left the cover of their trees. On the left
brave soldiers charged across open ground, only to fall by the
hundreds. The Confederate line stood unbroken.
“The men bent down as they pushed forward, as if trying…to breast a tempest, and the files of men went down
like rows of blocks or bricks pushed over by striking against each other.” John L. Piper, 12th New Hampshire Infantry
42 x 24 inches | 38% of actual size | december 2008 | richmond national battlefield park | Wayside Exhibit 053
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 54
Final art is scanned at high-resolution and placed in the layout with final text, labels, and other graphics. The final artwork represents the best compilation of knowledge at the time. Date the original for future reference.
Section B Wayside Guide | Draft Plan | Illustrations
Selecting the ArtistSome artists are good at architectural detail, others capture people, natural scenes, wildlife, or scenes from specific historical time periods. It is important that the artist understand the subject matter to represent ideas accurately. An artist without subject-matter expertise may require a prohibitively large reference package.
Art Review and ApprovalExpect this to be a learning process for both the artist and the park staff. Invest time and attention during every review to correct the content along the way. Pay attention to the details. Don’t wait until the final review! Creating new artwork is a learning process for subject-matter experts and artists. Assume additional research will be needed throughout the process.
Revisions Are CumulativeOnce a detail or direction has been decided, don’t go back to change it at a later review stage. The biggest changes should happen in early reviews. Later reviews are for fine-tuning the details only. Asking for big changes in composition or direction late in the game means delays, cost overruns, and missed deadlines.
Full-Scale ReviewsSometimes artwork for waysides is created at the actual size of the wayside. This is not always practical. The artist may be working on a smaller scale. Print out actual-size review copies of the work-in-progress to be sure that the level of detail is appropriate for the size of the wayside.
On-Site ReviewsConsider reviewing the work-in-progress on site at the wayside location to ensure that the details match the view visitors will see.
Links and DocumentsHFC Commissioned Art Collectionhttp://www.nps.gov/hfc/products/art-collection.htmBefore spending time and money to develop new art, search the Harpers Ferry Center Commissioned Art Collection. This archive contains over 10,000 illustrations. Part of the collection is available online to federal employees. Most of the collection is owned by the National Park Service and can be freely reproduced.
Acquiring New Illustrationshttp://www.nps.gov/hfc/products/waysides/index.htmThese guidelines and worksheets state the policies and procedures for commissioning any new artwork for the National Park Service. This can help in developing the artwork Scope of Work.
NPS Art Contractshttp://www.nps.gov/hfc/acquisition/contracts.htmHarpers Ferry Center maintains several contracts with talented artists familiar with National Park Service requirements. The contracts have fixed rates, quality standards, and detailed specifications for use-rights.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 55
What To Expect Creating new artwork as a part of a larger wayside project can significantly add to the cost and time it takes to complete a project. Begin early and develop art in tandem with the layout to avoid delays.
Section B Wayside Guide | Draft Plan | Maps
Creating New MapsUnlike most maps, wayside maps can only be used on-site. They need to be quickly understood and easily remembered. The wayside audience is mostly on foot. The You Are Here is the most important feature on orientation maps, which should provide only the information person needs to travel from the wayside (point A) to point B.
Map GuidelinesVisitors will likely use a combination of wayside maps and brochure maps for orientation purposes. Consistency in the look, feel, and function of all visitor-use maps will improve reader orientation and understanding. Map standards serve as a guide, not as a hard-and-fast set of rules.
Planning a MapThe installation location of a wayside affects the content of the map. Start by defining the purpose. A map may not be the best way to accomplish the goal!
AudienceRemember, a wayside audience is mobile. Visitors face a particular direction with a view of specific landscape and structural features. To work, the map must relate to the view.
OrientationWayside trailhead maps usually work best when they are oriented to match the direction viewers face. In contrast, most other types of maps generally work best when north is at the top.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 56
Did You Know?
Harpers Ferry Center created Wayside Map Standards to establish a common language among National Park Service visitor-use maps.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 57
Section B Wayside Guide | Draft Plan | Maps
Size and ScaleMap size and scale is based on the purpose, geographic area, and content. Scale must be considered before size. Scale is the amount of geographic area represented in a particular physical size. Size is the physical length and width of the map. Figure out the scale first, mock up the map, and then develop the wayside layout around it. Create a map at the same size as it will appear in the layout.
ContentDetermine what geographical information and labels to include on the map. Gather resource maps to be used for base information, keeping in mind that these reference maps were created for different purposes. Make sure the map labels are consistent with park signs, wayside exhibit text, or park publications. Make a list of all relevant features (park areas, open water areas, drainages, roads, trails, etc.) and labels (spelled correctly) in order of importance. This helps the cartographer understand the map requirements.
Designing Tactile Wayside MapsTactile maps are not just regular printed maps with Braille or textures added. They are maps converted for low-vision users who may not be able to relate map features to the visible landscape. This PDF has more information. http://www.nps.gov/hfc/accessibility/index.htm
Common Wayside Map PitfallsMap Goes Here. Never create a wayside layout with a box and a “map goes here” note. A poorly scaled map can be misleading and possibly dangerous to visitors. Once a map is produced, adding to the map area or changing the scale means delays, cost overruns, and missed deadlines.
Too Much Detail. Remember the audience and how they use maps. Can they understand where they are with a single glance? How much detail can they commit to memory as they walk away? For trailhead maps, limit key elements to what is within range of a typical day-hiker. Provide topo maps, brochures, tour maps, GPS units, or trail signs for more complex wayfinding.
One Size Does Not Fit All. Existing park brochure maps and older sketch maps of trails rarely do a good job when inserted into a large-format wayside layout. A simple map works best.
Links and DocumentsWayside Map StandardsUse these guidelines as a tool to plan, create, and evaluate your outdoor orientation maps.http://www.nps.gov/hfc/products/waysides/way-process-maps.htm
Starter Map FileThis Adobe Illustrator file contains tagged layers with preset features for lines, fonts, colors, and symbols to streamline making on-site orientation maps.http://www.nps.gov/hfc/products/waysides/way-process-maps.htm
NPS Map ResourcesThis webpage contains downloadable park map files, resources like NPS recreation symbols, and information about the design and production of visitor-use maps.http://data2.itc.nps.gov/hafe/hfc/carto.cfm
Section B Wayside Guide | Draft Plan | Tactile Elements
Models and Tactile ElementsWayside exhibits are a primarily visual medium. For people with limited or no vision, tactile elements give greater access to the site’s significance. For fully sighted visitors, tactile elements add richness that two-dimensional wayside exhibits do not provide.
Design ConsiderationsWhat is the best way to communicate concepts to visitors with visual impairments? A raised-line map can reveal geographic relationships effectively, but would not be a good choice for a steam engine. Bas relief can reveal the texture of an alligator but would not be appropriate for a cactus. Braille provides access for some visitors but is not used by all people with visual impairments.
A tactile element may be a single item or a combination of items on a single base. When planning a tactile element on a wayside think about how it will integrate with other graphics and text. Will it need its own text or caption? Will Braille labels be added? Will visitors with low vision know where to find it?
Fabrication GuidelinesSafetyConsider the use of materials in hot or cold climates. Avoid undercuts, or places where thin or narrow features are unsupported. At these weak points breaks are more likely to happen, leaving dangerous sharp edges. Watch out for small spaces that trap fingers.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 58
What To Expect Tactile elements are custom items. They require additional planning, design, prototyping, testing, and fabrication. To ensure success with visually-impaired audiences, consider getting input on design ideas at the outset.
Section B Wayside Guide | Draft Plan | Tactile Elements
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 59
Vertical ExaggerationItems that project off the surface too far become handles for children and others and can break or bend a panel. A flatter tactile is less destructible. The more vertical exaggeration needed, the more important it is that the material be durable and strong.
MountingAn important part of tactile design is the attachment method. Will it be surface mounted? Will fasteners hold it from behind? Will you need to drill holes through the panel, use security screws, or special tools for installation and removal? If the tactile elements are small, consider mounting them to a separate base. A base not only protects smaller objects from damage but visually sets off the object and provides a larger mounting surface.
MaterialsResinHigh-impact resin plastics are available that look highly realistic when colored and will endure years of normal use.
Cast MetalIf the application requires decades of durability, bronze or other cast metal may be the correct choice. Cost may be a factor because metal casting is much more involved than plastics. Metal is also difficult and costly to color if the base metal color is not acceptable. Metal castings in direct sunlight may become too hot to touch.
PlasticsThermoformed plastics can be combined with full-color graphic layouts. This works well for limited-relief maps that include Braille labels.
Reference Package RequirementsPhotos and SamplesA collection of pictures or samples is required to produce tactile models. Depending on the tactile element, a sample may be available (a natural specimen), but often pictures of animals, buildings, or objects may be necessary. Be sure to annotate the photos with a scale or dimensions.
SpecificationsClearly define the specifications in writing or in drawings to show size, scale, orientation, material, finish, and mounting method. Be thorough when specifying a tactile model; the outcome will only be as good as the directions are clear.
Tactile MapsTactile maps are not just regular printed maps with Braille or textures added. They are maps converted for low-vision users who may not be able to relate map features to the visible landscape. This webpage has more information. http://www.nps.gov/hfc/accessibility/index.htm
Section B Wayside Guide | Final Plan
Final Wayside PlanThe Final Wayside Exhibit Plan is the last step in the planning and design process before the exhibits move into production. Changes to content and layout should be minimal at this point. The designers and planners adjust the final text, photos, maps, diagrams, and art for final review and approval before producing wayside exhibits.
Final Text AdjustmentsFinal EditingThe planner or an editor works directly in the InDesign exhibit file to correct spelling, grammar, or punctuation errors. Confirm all dates, facts, and labels. Add credit lines if required, and check for accuracy.
Final Typographic TreatmentThe designer makes the final adjustments to line lengths to smooth out the rag, look for awkward line breaks, adjust word and letter spacing (kerning), remove extra spaces, check alignments with other elements, and make final image adjustments so that any text printing over an image will be legible.
Wayside Exhibit Development Process
Site Analysis
Project Proposal
Draft Plan
Final Plan
Project Startup
You are here
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 60
Section B Wayside Guide | Final Plan
Place Final GraphicsFinal Scans of Approved ArtOnce the artwork is completed, reviewed, and approved, a high-resolution scan is made and placed in the layout file. Adjustments are made to the scan to improve legibility for any text or labels placed over the image.
Final Approved MapsFinal map files are placed in the layout. Map labels are cross-checked with the wayside panel text. For example, if the wayside text refers to the “Nature Center,” the map label should not read “Visitor Center.” If the text says “Army of the Potomac,” the map label should not read “Union Troops.”
Final High-Resolution PhotosAll low-resolution graphics selected and approved will be replaced or updated with high-resolution graphics, once use-rights have been secured. A high-resolution file is at least 100–200 dpi at actual size of the final reproduction.
Production FilesAssemble the final high-resolution graphic files, InDesign layout files, and fonts, using file naming conventions for wayside exhibits. Make sure all graphics meet color management requirements.
File Naming ConventionsRefer to the document on this webpage for guidance on file naming and archiving.http://www.nps.gov/hfc/products/waysides/way-grids.htm
Color Management for Designers and CartographersManaging image requirements for wayside fabrication requires a solid understanding of the imaging processes and how to manage color throughout design development and into production. Refer to the document on this webpage for color management.http://www.nps.gov/hfc/products/waysides/way-grids.htm
Low-resolution image (50 dpi at actual size)
High-resolution image (200 dpi at actual size)
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 61
Wayside GuideNational Park ServiceU.S. Department of the Interior
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 62
Section Wayside ProductionCThe Wayside Exhibit Production Process chart at the beginning of Section C outlines six major stages of work. This section details fabrication, installation, and long-term maintenance.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 63
Section C Wayside Guide | Wayside Production
Contents
Wayside Exhibit Production Process Chart
Production Files
Fabrication: Bases and Panels
Preparing the Site
Installation: Panels and Bases
Archive and Inventory
Maintenance
64
65
67
69
71
73
75
Wayside Exhibit Production Process
Production Files
Based on the approved Wayside
Exhibit Plan a production-ready
package is assembled. The
production package includes digital
layout files, high-resolution graphic
and map files, fonts, color proofs,
and production notes for the
fabricator.
Production Files
Review all layouts, printed full size
• Takethetimetocheckforhard-to-
seeerrors,andmakefinalcorrections
Assemble the production package
• Writeproductionnotestoguidethe
fabricator
• Print11x17color-correctcopiesofall
layouts
• Burnallproductionfilestodisk
(layouts,graphics,maps,fonts)
• Preparebaseorderform
• Gathercustombasedrawings
• Definetactilemodelspecifications
Print final layouts for park records
Park identifies delivery location for
panels and bases
Park writes a work order for site
preparation and installation
Fabrication
Panels are imaged from digital files.
Fabricator provides production proofs
for review. Once corrections are made
the panels are produced. Bases are
fabricated and shipped.
Fabrication
Fabricator images production proofs
• Productionproofsandsamplesare
inspectedandmarkedwithany
corrections
Panels are fabricated and shipped
• HFCtakesdeliveryofpanels,inspects,
andshipstothepark
Bases are fabricated and shipped to the
park
Tactile models are fabricated and
shipped
Preparing the Site
Park prepares wayside exhibit sites
for installation, making certain sites
are safe and accessible.
Site Prep
Secure permits and clearances
Make wayside exhibit pads accessible
and safe
Clear the vista
Stake the sites
Remove existing signs
Installation
Park installs the exhibits according
to installation plans and assembly
instructions and ensures safety and
accessibility at each site.
Installation
Shipping and receiving
• Parktakesdeliveryandinspects
shipmentsofpanelsandbases
Install bases
• Installationplanguideslocation,
directionofviewofeachwayside
• Installationmeetsaccessibility
requirements
Install panels
• Fillininstallationinformationonthe
stickeronthebackofthepanel
• Afterbasesaresecurelyinplace,
panelsandtactileelementsare
installed
Prepare audio description of each
wayside and its location
Conduct summative evaluation
Archive / Inventory
Production files are archived, back-up
panels are inventoried and securely
stored, warranty and graphics-use
records are appropriately filed, final
project data is input into Media
Inventory Databse System (MIDS),
and project accounts are closed.
Archive / Inventory
As-built files are returned by the
fabricator and archived
• HFCmaintainswaysidearchivefor
projectsdoneviaHFC
Backup panels are inventoried
• Parkkeepsbackuppanelinsafe
convenientlocationforeasy
replacementasnecessary
Critical project materials are archived
• Warrantyanduse-rightsagreements
• FinalWaysideExhibitPlan
• Productionfilesandmasterfiles
• Originalsourcematerialslikeprints,
negatives,ororiginalart
Park updates MIDS data
Park enters FMSS data
Project accounts are closed
Maintenance
The park site manager is provided
with a wayside exhibit maintenance
kit and informed how to properly
clean and maintain the new exhibit
panels and bases. The park maintains
the exhibits and replaces as needed.
Maintenance
Clean panels and bases
• Usethewaysideexhibitmaintenance
kit,whichincludeswritten
instructionsandmaterialsfor
maintainingtheexhibit
• Regularlywaxfiberglasspanels
Touch up bases
• Repairscratchesandchips
Replace deteriorated or damaged
panels
• Keepabackuppanelinstorage
• Replacedamagedpanelswiththe
backuppanelandorderanew
backup
Clear the vista
• Performregularmaintenanceto
removeortrimobstacles
Maintain the site
• Ensuresiteconditions,waysidepad,
entrances,andexitremainclear,safe,
andaccessible
Summary Chart(Formoredetailedrequirementsseehttp://www.nps.gov/hfc/products/waysides)
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 64
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 65
Section C Wayside Guide | Production Package
Production FilesOnce the Final Wayside Exhibit Plan is approved, production begins with assembling the digital graphics, design files, and manufacturing specifications needed to fabricate the wayside bases and panels.
Start with a Final Full-Size Print ReviewUp to this point in most wayside projects, panel layouts have been reviewed as scaled-prints, usually about 40 percent of the actual panel size. But before fabrication begins, it is recommended that all layouts be printed at actual size for a final, detailed review. Both the planner and designer review these full-size proofs. The park staff may also review them, but this is less common.
What To Look ForAt this stage the review should not be about content. Look for things like extra spaces between words or letters, misalignment of elements, blemishes in graphics, and typographic refinements like kerning, rag, and legibility.
Major Roles
Wayside Designerreviews full-size proofs and makes corrections to files and prepares production-ready package.
Wayside Plannerreviews full-size proofs.
Park Maintenancepicks delivery location,writes work order, reviews custom base drawings.
Wayside Exhibit Production Process
Fabrication Site Prep Installation Archive /Inventory
ProductionFiles
Maintain
You are here
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 66
Elements of the PackagePrinted Production NotesThe Production Notes document is a written set of instructions that direct the fabrication of wayside panels. It provides specifications like file type and version, and color-space, and special notes like non-printing layers or project-specific notes like duplicates with “You Are Here” label changes.
Color Copies of All LayoutsFinal color copies of the layouts, printed at scale on 11x17 paper, are provided to the fabricator for cost-estimating purposes, as well as to show them what each panel should look like in its finished form.
Color Target ProofsIt is useful to provide the fabricator with color prints that reflect the intended color of the final panel. Called color target proofs, these can be generated in a variety of output materials. Color target proofs are less critical when a good color management process is in place.
Color Management for HFC Designers and Cartographershttp://www.nps.gov/hfc/products/waysides/index.htm
Digital Files on DiskDigital files provided to the fabricator include the exhibit file, linked high-resolution graphic files, maps or other vector graphic files, and fonts.
Custom Base DrawingsMounting wayside hardware onto existing railings, masonry structures, or other existing hardware will require detailed fabrication drawings. Wayside bases that are not standard NPS design will also require design drawings.
Installation Work OrderWith the fabrication contract in place, a delivery location and date are established. The park writes a work order for wayside base installation and site preparation.
Tactile Model SpecificationsIdentify the model material, color, and method of reproduction and mounting. Provide a reference package with samples, photographs, and drawings showing layouts of multiple-object models, dimensions, and other specific details. List shop inspections needed for adequate review and approval.
Portion of a full-size print showing corrections marked up during full-size print review stage. This is the last round of corrections before the job is burned to a disk and sent to the fabricator.
Production Notes example
E x p E r i E n c E Y o u r A m E r i c A™
The National Park Service cares for special places saved by the American people so that all may experience our heritage.
Harpers Ferry center Production Notes Digital
P.O. Box 5067 Mather PlaceHarpers Ferry, WV 25425
304 535-6451 phone304 535-6176 fax
Harpers Ferry CenterMedia Development
national park Serviceu.S. Department of the interior
potomac Heritage national Scenic Trail
10 Exhibits (101, 103, 106, 110, 125, 201, 218, 301, 309, 318) plus 17 duplicates*
• All layouts have been created in InDesign CS.3
• All photoshop images are HI-RES and in RGB color space, Adobe RGB color profile has been
embedded in all RGB images. They have NOT been converted to CMYK
• All Adobe Illustrator files are in CMYK with U.S. Web Coated (SWOP) v2 profile embedded.
• For best printing results from InDesign, please change the Send Data to “all” and Transparency
Flattener to [High Resolution], (see figures below)
*Special Notes:
• Wayside 103 has eight exact duplicates (112, 127, 203, 219, 222, 302, 306, 311)
• Wayside 106 has four exact duplicates (118, 121, 129, 206)
• Wayside 218 has three duplicates with different “You Are Here” locator labels for waysides 223,
224, and 255. To create these files, the fabricator shall turn the appropriate InDesign layer “on,”
and the other three layers “off.”
• Wayside 301 has one duplicates with different “You Are Here” locator labels for waysides 304. To
create these files, the fabricator shall turn the appropriate InDesign layer “on,” and the other layer
“off.”
• Wayside 309 has one duplicates with different “You Are Here” locator labels for waysides 317. To
create these files, the fabricator shall turn the appropriate InDesign layer “on,” and the other layer
“off.”
Section C Wayside Guide | Production Package
Section C Wayside Guide | Fabrication
Fabrication: Panels and BasesWayside exhibits are manufactured by a variety of contractors who specialize in panel imaging, base manufacturing, or both. Panels are produced from the digital files provided with the production-ready package. Bases are fabricated according to detailed shop drawings.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 67
Base FabricationMaterial ChoicesA variety of material choices are available for the bases and panels. Current information about materials is available on this webpage.http://www.nps.gov/hfc/products/waysides/way-product-panels.htm
Base Fabrication ContractsHarpers Ferry Center maintains several contracts with hardware fabricators for waysides and pedestrian signs. The bases are made according to NPS standards for design and materials. http://www.nps.gov/hfc/acquisition/contracts.htm
Custom Base Shop DrawingCreate new shop drawings when mounting or other requirements call for detailed custom hardware solutions. Fabrication drawings can be created by HFC staff or hardware fabricators.
Major Roles
Production Managerdirects panel and base fabrication contracts,and inspects panels.
Wayside Designerreviews production proofs and makes corrections to files.
Wayside Plannerreviews production proofs.
Wayside Exhibit Production Process
Fabrication Site Prep Installation Archive /Inventory
ProductionFiles
Maintain
You are here
Section C Wayside Guide | Fabrication
Panel FabricationWayside panels may be fabricated in several materials, each with different manufacturing processes and requirements. But all manufacturing should begin with a production proof and in some cases a material sample. Production proofs are inspected for color accuracy, print errors, and other flaws. Corrections are made and the panel is imaged and shipped to the Production Manager for final inspection. Park shipping address is confirmed and the park is notified when delivery will be made. The park needs a safe place to receive and store the panels and bases until installation is complete.
Panel Fabrication ContractHarpers Ferry Center maintains several contracts with panel fabricators for wayside exhibits and pedestrian signs. They can produce a variety of panel types, including fiberglass, high-pressure laminate, porcelain enamel, and fused polycarbonate. Harpers Ferry Center staff provide final panel inspection for projects managed by the Center.http://www.nps.gov/hfc/acquisition/contracts.htm
Production ProofDifferent types of panels are reviewed using different types of proofs. In all cases a full- or half-size paper proof is obtained. It is important that the proofs accurately represent the final production color and material. Porcelain enamel and high-pressure laminate panels also require a material sample for accurate color proofing of certain colors. Changes are noted on the paper proofs along with a signature of approval, and returned to the fabricator. PDFs may be adequate to confirm the changes.
Inspection and AcceptanceUpon final panel inspection, the production manager will check fabrication quality, color accuracy, size, and overall consistency. Rejected panels are replaced. Panels are shipped to the park when the entire order is accepted.
Tactile Model FabricationWork with a skilled model maker who, in most cases, will not be the same vendor fabricating the panels or bases. Request a prototype or sample of work from the model maker and test or evaluate the sample with the target audience.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 68
Considerations
Fabrication is not finished when you receive your shipment. Panels and bases must be inspected right away. Any unacceptable parts will need to be corrected or re-fabricated. Allow time for this.
Section C Wayside Guide | Site Preparation
Proper site preparation and base installation is essential to the success of outdoor interpretive exhibits. Wayside locations must be safe and should have an unrestricted view of the relevant landscape features. Consider the following recommendations for wayside installation.
Preparing the Site
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 69
Vista ClearingPark staff (maintenance, interpretation, and resource managers) identify specific obstacles to be removed for the wayside exhibit to be successful. Refer to initial planning documents for a list of obstacles to clear and address compliance issues. Once cleared, include regular maintenance at the site to keep the vista clear.
Custom MountsAs shown above, waysides sometimes require custom mounting to existing railings, or other structures. The installation crew should have copies of approved base and installation drawings. The area may need to be closed to the public to ensure safe installation.
Permits and ClearancesUnderstand the necessary permits and clearances to install wayside exhibit bases, create paths or trails, or resurface wayside pads. Permissions and clearances should be secured well in advance of panel and base delivery.
Major Roles
Park Maintenanceprepares site for safe installation.
Park Interpreterreviews site locations with park maintenance to ensure proper placement.
Preparing railing mounts at Obed Wild and Scenic River
Wayside Exhibit Production Process
Fabrication Site Prep Installation Archive /Inventory
ProductionFiles
Maintain
You are here
Section C Wayside Guide | Site Preparation
Stake the SitesBefore digging any holes or pouring concrete, refer to the approved Wayside Proposal, which identifies specific site locations, and stake each site with one flag for each wayside base leg. Have a copy of the final layouts on hand to ensure that the location of the base will match the intended view of the wayside panel.
AccessibilityWayside exhibits must be installed at heights and angles favorable for viewing by everyone, including wheelchair users. For a low-profile exhibit the recommended height is 32 inches from the bottom of the exhibit frame to the finished grade. For an upright or bulletin board, the recommended height is between 24 and 36 inches from the bottom of the exhibit frame to the finished grade, depending on the panel size.
Wayside PadAccessibility guidelines recommend that wayside exhibits have level, firm, hard-surfaced, and slip-resistant exhibit pads.
Removing Existing SignsRefer to the approved Wayside Proposal, which identifies the removal of any existing signs before installing new waysides. Some parks may have a separate installation plan or work order to remove existing signs.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 70
This wayside is not only inaccessible to someone in a wheelchair, but people on foot would struggle to reach it and stay balanced.
Section C Wayside Guide | Installation
Upon receipt of the panels and bases, the park directs the installation. The first task is to open the crates immediately and inspect the shipment for damage or missing items.
Installation: Bases and Panels
Wayside bases delivered to Harpers Ferry
National Historical Park
Shipping and ReceivingIdentify a location, like a maintenance warehouse, to receive shipments. Inform the warehouse staff of delivery details, including the expected delivery date, size and type of delivery truck (to determine whether a forklift is needed), and size and weight of the shipment.
InspectionImmediately upon receiving a delivery, the panels and bases must be inspected for damage or missing items. Uncrate the panels and bases and recycle the packing materials. Check the packing slip against the original order and check the items delivered against these lists. Contact the vendor and Contracting Officer or COR (Contracting Officer’s Representative) as soon as possible if items are missing. Keep small parts together with the bases. Make sure there is a manufacturer’s sticker on the back of each panel.
Wayside Exhibit Production Process
Fabrication Site Prep Installation Archive /Inventory
ProductionFiles
Maintain
You are here
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 71
Major Roles
Park Maintenanceinstalls wayside bases and panels.
Section C Wayside Guide | Installation
Wayside Base InstallationInstall bases plumb and level. Follow instructions provided with each wayside base delivery. Refer to these written instructions for installation procedures.
Wayside Installation Videohttp://www.nps.gov/hfc/products/waysides/way-service-base-install.htm
Panel InstallationOnce the bases are securely installed, installation of the panels can begin. Before installing panels, fill in any relevant information like the installation date and exhibit number on the sticker on the back of the panel.
Tactile Model InstallationIf tactile elements require drilling holes through the wayside, use a drill template for correct placement of holes. It is recommended that the fabricator provide security screws and the appropriate screwdriver for mounting a tactile model. Keep the security screwdriver with your cleaning kit (see page 75).
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 72
Bulletin CasesAfter a bulletin case is installed, store the keys in a safe place. Inspect bulletin cases regularly for faded or out-of-date content.
Audio DescriptionOnce the waysides are installed, audio description of each wayside and its location can be done. Audio descriptions can be made available to visitors through a variety of new technologies.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 73
Section C Wayside Guide | Archive and Inventory
Archive and InventoryAfter installation several tasks must be completed to close out the project successfully. These are listed on the Wayside Exhibit Production Process chart. The most important is to archive the production files. The cost of replacing a wayside from archived files is a fraction of the cost of starting over. If your project is managed by Harpers Ferry Center, archived records are maintained at the Center. Otherwise you will need to archive the following:
As-Built FilesDuring the production process, an error may be corrected or a change made. Changes made during production are often made by the fabricator. Make sure the files archived for future replacement are the most recent.
WarrantyManufacturing companies often provide a written warranty for their products. Harpers Ferry Center maintains all warranty information for panels and bases produced under its contracts.
Master FilesKeep all layered master graphic files with the production files for each wayside. These are Photoshop files that contain original unedited images. Often these files are flattened for production, but the layers of information should be kept in case future changes are needed.
Major Roles
Production Managerarchives product warrantees, production files, original graphics, and graphic use-rights agreements.
damaged waysideGulf Islands National Seashore
Did You Know?
Panels last 2–25 years averaging about 5 years before replacement is necessary.
Wayside Exhibit Production Process
Fabrication Site Prep Installation Archive /Inventory
ProductionFiles
Maintain
You are here
Section C Wayside Guide | Archive and Inventory
Keep Final CopiesKeep a printed copy of the final wayside panels or an archived PDF file to easily identify the number, date, content, and size of each of your wayside exhibits.
Use-Rights AgreementsAll images not in the public domain must have a use-rights agreement that documents the payment and terms or conditions of the use. Keep this document in a safe, accessible, place with a printed copy of the final waysides.
Source MaterialsAll scans, prints, slides, negatives, and large-format color transparencies are returned to the sources. Duplicates are stored with the project’s production-ready package for future updates or replacement.
MIDSThe NPS Media Inventory Database System (MIDS) contains data on the content and condition of National Park Service interpretive media, including wayside exhibits. MIDS permits parks to add new media inventory records, update existing records, or delete obsolete records. All of these steps should be taken to keep the MIDS database up-to-date.
FMSSWaysides are entered into the NPS Facility Management Software System (FMSS) as an interpretive media asset. Refer to interpretive media business practices and inspection guidance documents for specific information.
All waysides produced by Harpers Ferry Center are maintained in green three-ring binders organized by park name.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 74
14,000 waysides are listed in the MIDS database. March 2009
Did You Know?
Harpers Ferry Center has digital archives for wayside projects for 212 parks.
Section C Wayside Guide | Maintenance
MaintenanceWayside exhibits are among the most durable of all interpretive media, usually requiring little maintenance, but their usefulness can be enhanced and extended by periodic inspection and care. We recommend that each wayside exhibit be examined and cleaned twice each year.
CleaningRegular cleaning of wayside panels, bases, and tactile models with mild soap and water will maintain the general appearance of the wayside and will remove dirt and debris that can cause more damage. Keep a well-stocked cleaning kit (shown above), including any special instructions and tools for removing or replacing panels or tactile models.
FMSSFollow regular maintenance procedures as required according to the Facility Management Software System.
Create a wayside cleaning kit:
backpack,paper towels,
graffiti remover,window cleaner,fiberglass wax,polishing cloth,
written instructions for panel replacement,
and a copy of the manufacturer’s
information.
Major Roles
Park Staffperforms routine inspection and cleaning.
Wayside Exhibit Production Process
Fabrication Site Prep Installation Archive /Inventory
ProductionFiles
Maintain
You are here
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 75
Section C Wayside Guide | Maintenance
Wayside Panel MaintenanceCleaning each exhibit with mild soap and water before inspection can reveal hidden damage, remove dirt or debris that may cause more damage, and improve the general appearance of the exhibit.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 76
Porcelain
Problem Solution
Common surface dirt, including Wash with mild soap or use window bird droppings cleaner
Spray paint (all types) or Apply graffiti removerpermanent markers
Small Chips Wash area and apply auto touch-up paint
Extreme deterioration, like large Replace panelchips, rust spots, sharp edges, faded text or graphics
Digital Products (HPL, Fiberglass, Fused Polycarbonate)
Problem Solution
Common surface dirt Wash with mild soap and water, then apply marine wax or fiberglass wax
Spray paint (all types) or Apply graffiti removerpermanent markers
Extreme deterioration, like Replace panelweathering, vandalism, faded text or graphics, delaminating
This panel at Canaveral National Seashore
is showing extreme deterioration from
weathering and should be replaced.
Section C Wayside Guide | Maintenance
Wayside Base MaintenanceCleaning each exhibit base with mild soap and water before inspection can reveal hidden damage, remove dirt or debris that may cause more damage, and improve the general appearance of the exhibit.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 77
This wayside base at Canaveral National
Seashore is showing extreme deterioration from weathering and should be
refinished.
Touch Up Painted Aluminum Bases
Minor scratches and paint chips can be repaired by applying small amounts of paint according to the following procedures:
Sand AreaBy hand or orbital sander, first use 80-grit sandpaper, then smooth with 100-grit sandpaper.
CleanWipe with a lint-free rag, using a solvent like enamel thinner or lacquer thinner. Wipe solvent off immediately. Do not touch the surface after cleaning.
Mix Catalyst and PaintMix catalyst and paint following manufacturer’s specifications. Paint will become too glossy and brittle with too much catalyst. With too little catalyst the paint will not cure properly and will fade quickly. Mix only what you can use in two hours.
Apply PaintDepending on the amount of surface to cover, use a disposable artist’s brush, roller, or sprayer (spraying requires reducer and thinner). Stipple the fresh paint using a pipe cleaner folded in half to simulate the original textured finish. Air temperature at time of application should be from 65 to 85 degrees Fahrenheit. Paint dries to the touch in 3 hours, is workable in 8–10 hours, and cures in 2–3 days under normal conditions.
Refinishing If the surface of the wayside exhibit base has suffered extensive damage, the entire base can be repainted. Contact Harpers Ferry Center for a video guide to refinishing NPS wayside hardware in the field.
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 78
Section C Wayside Guide | Maintenance and Rehab
ReplacementTime, budget, logistical, and environmental considerations associated with refinishing wayside exhibit bases in the field may suggest that replacing bases is a better alternative than repairing them. New bases typically cost under $1,000. Take the old bases to your local metal recycling center.
Vista Clearing and Site MaintenancePark staff (maintenance, interpretation, and resource management) work together to inspect wayside vistas routinely to identify specific obstacles that may need to be removed or trimmed. Perform regular maintenance on the site to keep the vista clear.
Index Wayside Guide
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 79
A
Accessibility 24, 27, 29, 31, 37, 53, 64, 70
See also Audio
See also Braille
See also Tactile
See also tactile
Archive 24, 38–39, 55, 64, 73–74
Audience 5, 7, 10, 14, 18, 29, 36, 47–49, 56–58,
68
Audio 9, 10, 22
B
Base 10, 19, 24, 27, 30, 32, 34–35, 41, 57–59, 64,
65, 66–73, 75, 77, 82
See also Low-profile
See also Upright
Braille 9, 22, 57–59
C
Cartographer 24, 40, 57, 61, 66, 83
Case Study 43–46
Cleaning 9, 24, 64, 72, 75–77
Color 32, 34, 42, 47, 54–55, 57, 59, 61, 64, 66, 68
See also Color Management
Color Management 61, 83
Common Pitfalls 22, 33, 36, 47, 49, 57
Contracts 23–24, 28, 55, 67–68, 71, 73, 83
Credits 39, 60 See also Use-Rights
Custom 20, 24, 32–33, 58, 64, 65–67, 69
D
Data 24, 27, 32, 34–35, 37, 39, 57, 64, 74, 83
Designer 27, 30–34, 38–47, 53, 60, 61, 65–67
Did You Know? 12, 41, 43, 48, 56, 73, 74
Digital Files 27, 33, 39, 64, 65–67, 74
See also High-resolution
See also Production files
E
Evaluation 10, 24, 27, 29, 53, 64, 68
F
FMSS 64, 74–75
G
GPS 22, 32, 34, 57
Graphics 11–13, 17, 29, 73–74
H
High-resolution 27, 54, 61, 64, 65–67
See also Production files
I
Illustrator 40, 54–55, 57
Inspection 9, 65–68, 71, 75–77
See also Review and Approval
Installation 10, 24, 32, 33, 68–72
Interpretation 7–10, 17, 23–24, 29, 36, 49
See also Park Interpreter
Inventory 73–74
K
Kiosks 20
L
Landscape 7–15, 17, 30, 32, 38, 40, 42, 45,
47–48, 54, 56–57, 59, 69–70
Layout 12, 24, 27, 31, 35, 38, 40–43, 47–48,
53–55, 57, 59–61, 65–66, 70
Low-profile 7, 11–17, 70, 78
M
Maintenance 7, 9, 10, 24, 31–33, 35, 62, 64, 69,
75–78
Map 18–19, 22–24, 27, 30–35, 37–38, 40, 53,
56–61, 64, 66, 73
MIDS 64, 73, 74
Index Wayside Guide
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 80
O
Orientation 10, 17–19, 22, 27, 29, 34, 36, 56–57,
59
P
Panel 15–18, 20, 32, 34–35, 41–43, 59–61, 82
Park Interpreter 30, 35–36, 38, 40, 48, 69, 78
Park Maintenance (staff) 23, 24, 27, 35, 65–66,
69, 71
Park Manager 23–24, 35
See also Superintendent
Permits 64, 69, 74
Planner 30, 32, 34–38, 40, 53, 60, 65, 67
Production files 40, 61, 64, 65–67, 73
Production Manager 67–68, 73
Project Lead 23–24, 27, 28
R
Reference 23, 27, 33, 38–40, 52, 54–55, 59, 66,
73
Research 29, 33, 38–39
Resources 22, 24, 27, 28–30, 33, 52, 57, 83
Review and Approval 23–24, 27, 34–35, 38–40,
53–55, 60, 64, 65–68
See also Inspection
Roles 27, 29–30, 34, 38, 40, 65, 67, 69, 71, 73, 75
S
Safety 9, 17–18, 20–22, 31, 48, 58, 64
Shipping 64, 68, 71
Sign Program 22, 41, 81
Site-specific 7–10, 22, 27, 29, 36, 38–39, 45
Specifications 41, 55, 59, 64, 65–66
Superintendent 23–24
See also Park Manager
T
Tactile 9, 15, 27, 40, 57–59, 64, 66, 68, 72, 75,
83–84
Team 23–24, 27, 28, 30, 32, 34, 35, 40, 53
Text 11–12, 14, 16, 18, 21–22, 24, 27, 40–54,
57–58, 60–61, 76
Things To Consider 53
Tools 52, 59, 75
Typography 41, 47
U
Upright 7, 17–22, 70
Use-Rights 27, 38–39, 55, 61, 73
V
Vista Clearing 9, 24, 35, 64, 69, 78
W
Wayfinding 17, 22, 57
What to Expect 31, 35, 39, 55, 58
Writer 48–52
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 81
Appendix Wayside Guide
Wayside Exhibit Development Process chart
General Informationhttp://www.nps.gov/hfc/products/waysides/
The following Web addresses for in-depth webpages are listed in the order in which they appear in the Guide.
Section A Site-Specific Media and Wayfinding
Interpretive Media Selectionhttp://www.nps.gov/hfc/products/ip-media-select.htm
Evaluations and Visitor Use Studieshttp://www.nps.gov/hfc/products/evaluate.htm
Foundations of Interpretationhttp://www.eppley.org/index.php?main_page=index&cPath=40
National Park Service Sign Programhttp://www.nps.gov/hfc/products/uniguide.htm
Park Publications and Trail Guideshttp://www.nps.gov/hfc/products/pubs/
National Park Service Mapshttp://www.nps.gov/hfc/carto/index.htm
Section B
Project Startup
Long Range Interpretive Planshttp://www.nps.gov/hfc/products/ip-lrip.htm
Developing a Wayside Exhibit Teamhttp://www.nps.gov/hfc/products/waysides/way-team.htm
Interpretive Media Selectionhttp://www.nps.gov/hfc/products/ip-media-select.htm
Checklist To Evaluate Your Wayside Exhibitshttp://www.nps.gov/hfc/products/waysides/way-process-evaluate.htm
Accessibility Rules and Recommendationshttp://www.nps.gov/hfc/accessibility/index.htm
Evaluations and Visitor Use Studieshttp://www.nps.gov/hfc/products/evaluate.htm
Wayside Exhibit Cost Estimatinghttp://www.nps.gov/hfc/products/waysides/way-cost-estimating.htm
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 82
Appendix Wayside Guide
Section Bcontinued
Site Analysis
Choose Panel Materialhttp://www.nps.gov/hfc/products/waysides/way-product-panels.htm
Choose Base Structurehttp://www.nps.gov/hfc/products/waysides/way-product-bases-low.htm
Research and Graphic Acquisition
Photo Release Formhttp://www.nps.gov/hfc/products/waysides/way-graphics.htm
Standards for Digital Image Fileshttp://www.nps.gov/hfc/products/waysides/way-graphics.htm
Design
NPS Wayside Gridshttp://www.nps.gov/hfc/products/waysides/way-grids.htm
NPS Typefaceshttp://www.graphics.nps.gov/typefaces.htm
Writing
Examples of Wayside Writinghttp://www.nps.gov/hfc/products/waysides/way-samples.htm
Interpretive Foundationshttp://www.nps.gov/idp/interp/101/foundationscurriculum.pdf
Effective Interpretive Writing Tel broadcast 2008-05-09http://www.nps.gov/hfc/products/waysides/way-process-writing.htm
Bilingual Waysideshttp://www.nps.gov/hfc/products/waysides/way-process-language.htm
Editorial Style Guidehttp://www.nps.gov/hfc/products/waysides/way-process-writing.htm
Spanish Style Guidehttp://www.nps.gov/hfc/products/waysides/way-process-language.htm
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 83
Appendix Wayside Guide
Section Bcontinued
Creating New Illustrations
HFC Commissioned Art Collectionhttp://www.nps.gov/hfc/products/art-collection.htm
Acquiring New Illustrationshttp://www.nps.gov/hfc/products/waysides/index.htm
NPS Art Contractshttp://www.nps.gov/hfc/acquisition/contracts.htm
Creating New Maps
Designing Tactile Wayside Mapshttp://www.nps.gov/hfc/accessibility/index.htm
Wayside Map Standardshttp://www.nps.gov/hfc/products/waysides/way-process-maps.htm
Starter Map Filehttp://www.nps.gov/hfc/products/waysides/way-process-maps.htm
NPS Map Resourceshttp://data2.itc.nps.gov/hafe/hfc/carto.cfm
Tactile Elements
Designing Tactile Wayside Mapshttp://www.nps.gov/hfc/accessibility/index.htm
Production Files
File Naming Conventionshttp://www.nps.gov/hfc/products/waysides/way-grids.htm
Color Management for Designers and Cartographershttp://www.nps.gov/hfc/products/waysides/index.htm
HARPERS FERRY CENTER | NATIONAL PARK SERVICE | 1ST EDITION | OCTOBER 2009 | PAGE 84
Appendix
Section C Wayside Exhibit Production Process chart
General Informationhttp://www.nps.gov/hfc/products/waysides/index.htm
Base and Panel Fabrication
Material Choiceshttp://www.nps.gov/hfc/products/waysides/way-product-panels.htm
Base Fabrication Contractshttp://www.nps.gov/hfc/acquisition/contracts.htm
Panel Fabrication Contracthttp://www.nps.gov/hfc/acquisition/contracts.htm
Installation
Wayside Installation Videohttp://www.nps.gov/hfc/products/waysides/way-service-base-install.htm
Wayside Guide