Wayne Water Systems Catalog 2011

SL8277 v3 5/11

WAYNE WATER SYSTEMS | 101 PRODUCTION DRIVE | HARRISON, OHIO 45030 | 1-800-237-0987 | www.waynepumps.com© 2011, WAYNE/Scott Fetzer Company.

W O R R Y - F R E E W A T E R H A N D L I N G S O L U T I O N S

Customer Service: 1-800-237-0987Web Site: www.waynepumps.com

SUMP PUMPS 3 answer guide 3 combination systems 5 back-up systems 9 cast iron submersible 11 thermoplastic submersible 14 pedestal 18 UTILITY PUMPS 19 answer guide 19 gasoline-powered 21 submersible 23 transfer 25 condensate 26 SEWAGE/EFFLUENT PUMPS 27 answer guide 27 commercial 29 residential 30 sewage systems 32 effluent 34 WELL PUMPS 35 answer guide 35 shallow 37 convertible 38 deep well submersible 39 air tank systems 40 LAWN PUMPS 41 answer guide 41 portable 43 permanent 43 POOL PUMPS 44 answer guide 44 in and above ground 44 SPECIALTY 45 pressure booster system 45 laundry tray system 45 ACCESSORIES 46 accessories 46

the history of wayne water systems table of contents

In 1928, Norbert G. Berghoff founded the Wayne Home Equipment Company located in Fort Wayne, Indiana. The Berghoff family was also known for owning and operating the famous Berghoff Brewery in Fort Wayne.

Wayne Home Equipment manufactured oil burners for use in home furnaces, water and space heaters, boilers, and industrial ovens. Wayne became quite successful in the oil burner business, but faced the challenge that oil burners were seasonal in nature. Fall and winter months became the high production periods for oil burners, creating the need for a complementary product that would increase Wayne’s business in the spring and summer months. Manufacturing water pumps became the solution to the balance out this seasonality.

In the 1940s, Wayne entered the water pump industry by acquiring the Zepher Pump Company, located in Decatur, Illinois. Wayne moved the Zepher facility to Fort Wayne, with its oil burner division to reduce manufacturing and transportation costs. In 1978, the Berghoff family made the decision to sell their home equipment company to the Scott Fetzer corporation. The Wayne Home Equipment Company remained in Fort Wayne, until August of 1991, when it moved to its current location in Harrison, Ohio.

With more than 70 years in the business, Wayne has become a dominant player in the water pump industry. We continue to bring market leading innovation to homeowners who need worry-free water handling solutions.

WAYNE offers a full line of sump, utility, sewage, effluent, well, lawn, pool, specialty pumps and systems, and accessories. Our business team is customer focused, continuously developing innovative products for homeowners, creating packaging and merchandising to make the in-store experience easier, providing fast delivery and superior after-the-sale support.

3 4Customer Service: 1-800-237-0987Web Site: www.waynepumps.com

SUMP PUMPSanswer guide

WHAT IS A SUMP PUMP? A sump pump is an automatic pump used to remove ground water from a sump pit. The most common application is for basement drainage to prevent residential flooding. WAYNE offers a complete line of primary sump pumps, emergency back-up systems, and accessories.

WHAT IS THE DIAMETER OF YOUR SUMP PIT? If your sump basin is between 11" and 14” wide, you may use a pump with iSwitch™ Technology, mechanical float, or diaphragm switch. Larger sump basins (14” or wider) accommodate either mechanical, diaphragm or tethered float switches.

IS AN ELECTRICAL OUTLET NEAR THE PUMP? All pedestal and submersible sump pumps have a three-pronged, grounded plug and a 120 Volt, 60 Hz, single phase motor with overload protection. You need a three-wire, GFCI grounded receptacle within four feet above the floor near your sump. Do not use an extension cord.

HOW MUCH HORSEPOWER (HP) DO YOU NEED? In general, the more horsepower, the better. Pump performance depends on how high and how fast you want to pump the water.

WHAT TYPE OF SUMP SYSTEM DO YOU NEED?

This system combines the performance of a primary 120 V submersible sump pump with the protection of a 12 V battery back-up sump pump into one complete system.INSTALLATION HIGHLIGHTS: Place the new unit on a solid, level foundation in the drained sump pit. Remove any silt or debris from the sump pit and surrounding area.

Thread check valve into pump body. The pump has a 1½” NPT discharge. If the existing piping is smaller, use an adapter.

Connect rigid pipe to rubber boot on check valve. Tighten hose clamps. Plug in power and fill the pit with water.

TOOLS NEEDED: PVC cement, screwdriver, pipe wrench, adjustable wrench, hacksaw, and pipe clamps.

Powered by a sealed-lead acid battery, these 12 V pumps protect your basement against flooding during power outages or primary pump failure. When used with a primary pump, the back-up sump pump completes your sump pump system, for maximum protection.INSTALLATION HIGHLIGHTS: Turn power to main pump off. Add a check valve between the back-up pump and the primary pump.

Attach control box to the side of battery box. Plug the float switch, pump and charger into the control box.

Unplug your main pump and fill the pit with water. With your back-up pump pumping successfully, plug your primary pump in.


Primary Sump Pumps are automatic pumps used to remove ground water from sump pits. They are powered by household electricity. There are two types of Primary Pumps: Submersible and Pedestal.INSTALLATION HIGHLIGHTS: If replacing an existing pump, remove the old pump carefully. Place the new unit on a solid, level foundation in the drained, clean sump pit. Connect the check valve to the discharge pipe and tighten the hose clamps.

Plug in power and fill the pit with water. If you have installed a submersible pump it will start automatically at the preset level. Finally, place the discharge pipe so it carries water several feet away from the foundation.


GFCI Protected Outlet

Inlet Pipe

Discharge Pipe

Check Valve

SUMP PUMP INSTALLATION

Minimum 11” For Float, iSwitch, and Diaphragm Switch

Primary Sump Pumps

Minimum 14” For Tether Float Switch Primary Sump Pumps

Minimum 22” For Submersible

Sump Pumps

Minimum 24” For Pedestal Sump Pumps

COMBINATION PUMP AND BATTERY

BACK-UP SYSTEMSBATTERY BACK-UP

SYSTEMS

PRIMARY SUMP PUMPS

Protect your basement from water...with water! Added protection during power failure or primary pump failure. Powered by municipal water pressure, there’s no need for electricity or batteries!INSTALLATION HIGHLIGHTS: Confirm your municipal water supply is a minimum of 40 PSI. Turn off power to main pump and unplug. A check valve must be installed between the primary pump and the tee or wye fitting.

Confirm a 2” clearance from pump to the base of the sump pit. Run a supply line with a ball valve.

Assemble float rod and attach to automatic valve. Connect hose from water powered back-up pump to vacuum breaker.

Fill the sump pit with water and adjust float rod for on/off positions. Plug the primary sump pump in.

TOOLS NEEDED: Screwdriver, pipe wrench, adjustable wrench, hacksaw, and check valve.

WATER POWERED BACK-UP SYSTEMS

For any questions regarding installation, please log onto www.waynepumps.com for help to the most frequently asked questions, answer guides, and manuals.

For more assistance, call our customer service department at 1-800-237-0987, Monday - Friday, between 8 am - 5 pm EST.

In addition, see our accessories section on page 51 to complete ALL your installation needs.


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y55

SUMP PUMPSsilent sump systems

SILENT SUMP SYSTEM WITH WIRELESS BACK-UP MONITORING!IF YOU ARE TIRED OF HEARING YOUR SUMP PUMP TURN ON AND OFF,� THIS IS THE SYSTEM FOR YOU.

J OB-READY SYSTEM INCLUDES: • Rugged, stainless housing primary pump • Silent check valve • FloodAlert™ Wireless Monitoring System • PVC pipes • All stainless hose clamps • Rubber coupler • PVC cement required for installation (sold separately) • PVC primer required for installation (sold separately)

SUMP PUMP3/4 HP • 4600 GPH @ 0’Our rugged 3/4 HP motor with stainless steel housing construction is designed for long life and top performance. Moving 4600 gallons of water per hour, this pump is the right choice for the toughest basement conditions, when compared to the industry average.

SILENT CHECK VALVEOur silent check valve is designed to eliminate the loud clunking noise often associated with standard check valves. The noise is caused by water contained in the discharge pipe flowing back into the pit when the pump turns off. Our check valve closes very quickly, eliminating the noise.

FLOODALERT™ WIRELESS SUMP PUMP MONITORING SYSTEMSince the Silent Sump System operates so quietly, the Floodalert™ wireless monitoring system is included to sound an audible alarm if a high water condition occurs in the sump pit. The system’s receiver unit can be placed anywhere within your home for added security and convenience.

Our easy-to-install, job-ready system includes all the components for replacing your existing primary sump system. Simply complete the assembly of the included discharge pipe, cut your existing pipe to match the height of this system and then install.

YE

AR

P

UMP WARRA

NT

Y

YE

AR

P

UMP WARRA

NT

Y55

25

20

15

10

5

04000300020001000 5000

EE980

FLOW RATE IN GPH

TOTAL DYNAMIC HEAD (FT.)

PERFORMANCEModel Discharge Head 5’ 10’ 15’ 20’

SSSEE980 Gallons/Hour 4300 3500 2550 1100

SSSEE980

T E C H N O L O G Y

PRIMARY PUMP AND BACK-UP SUMP SYSTEMPREASSEMBLED SUMP PUMP AND BACK-UP SYSTEM FOR QUICK AND EASY INSTALLATION!

S YSTEM INCLUDES: • Top suction, durable, cast iron primary pump • Vertical float switch for automatic operation • High flow, corrosion-resistant, battery back-up pump with reliable reed float switch • Battery box and charger • (2) Heavy-duty check valves

Preassembled and preset for quick installation Simple drop-in installation! Designed for 15" diameter or larger sump basins

120 VOLT PRIMARY PUMP• 1/2 HP primary pump pumps up to 4200 GPH @ 0’• Added assurance for maximum basement protection!• Vertical float switch for automatic operation• Top suction design filters debris and minimizes clogging• Approximate on level @ 9” - off level @ 4”

12 VOLT BACK-UP PUMP• High-capacity battery back-up pumps up to 3300 GPH @ 0’• Corrosion-resistant thermoplastic construction• Reliable reed float switch for automatic operation• Professional grade back-up system keeps battery properly charged

(Requires one 40 Amp Hr or 75 Amp Hr deep cycle battery)• Alarm system, with status indicator lights, lets homeowner

know when back-up system is active• Designed for easy installation• Battery case included

25

20

15

10

5

0200015001000500 3000

BACK-UP (ESP25)

FLOW RATE IN GPH


25

20

15

10

5

0300020001000500 4000

PRIMARY (CDU800)

FLOW RATE IN GPH



CDU800 Gallons/Hour 3900 3150 2100 600


ESP25 Gallons/Hour 3300 2800 2300 1500

WSS30V


SUMP PUMPSsimple sump | back-up systems

PRIMARY PUMP AND BACK-UP SYSTEMPREASSEMBLED SUMP PUMP AND BACK-UP SYSTEM FOR QUICK AND EASY INSTALLATION!

S YSTEM INCLUDES: • Top suction, durable, cast iron primary pump with vertical float switch • High flow, corrosion resistant, battery back-up pump with reliable reed float switch • Battery box and charger • (2) Heavy-duty check valves

• Professional grade back-up system keeps battery properly charged (Requires one 40 Amp Hr or 75 Amp Hr deep cycle battery)

• Preassembled and preset for quick installation• Simple drop-in installation!• Designed for 15” diameter or larger sump basins• 1/3 HP primary pump pumps up to 3800 GPH @ 0’• High-flow battery back-up pumps up to 1750 GPH @ 0’• Added assurance for maximum basement protection!• Top suction design filters debris and minimizes clogging

• Approximate on level @ 9” - off level @ 4”

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33

WSS20V

BACK-UP (ESP15)

25

20

15

10

5

0300020001000500 4000

PRIMARY (CDU790)

FLOW RATE IN GPH


PERFORMANCEModel Discharge Head 0’ 5’ 10’ 15’ 20’

CDU790 Gallons/Hour 3800 3450 2700 1700 100

ESP15 Gallons/Hour 1750 1410 720 300 0

24 VOLT BATTERY BACK-UP SYSTEM• Pumps up to 3500 GPH @ 0’• Heavy-duty, cast iron battery back-up sump pump system• Top suction design filters debris and minimizes clogging• Professional grade back-up system keeps battery properly charged

(Requires one 40 Amp Hr or 75 Amp Hr deep cycle battery)

• Alarm system, with status indicator lights, lets homeowner know when back-up system is active

• Designed for easy installation• Heavy-duty, cast iron, high performance 24 volt pump• 4 hour silence button with automatic reset• 1½” NPT discharge• Reliable reed float switch for automatic operation

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33

ESP45


ESP45 Gallons/Hour 3500 2880 2400 1750 900

20

15

10

5

04000300020001000 5000

ESP45


FLOW RATE IN GPH


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y22

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

SUMP PUMPSback-up systems


EWP10 Gallons/Hour 600 582 312 156

25

20

15

10

5

0480360240120 600

ESP15


FLOW RATE IN GPH

12 VOLT BATTERY BACK-UP SYSTEM• Pumps up to 3300 GPH @ 0’• Reinforced, corrosion-resistant, thermoplastic battery back-up

sump pump system• Reliable reed float switch for automatic operation• Professional grade back-up system keeps battery properly charged



• Designed for easy installation


ESP25 Gallons/Hour 3300 2800 2300 1500 100

ESP15 Gallons/Hour 1750 1410 720 300 0

25

20

15

10

5

04000300020001000 5000

ESP25


FLOW RATE IN GPH

EWP10

WATER-POWERED BACK-UP SYSTEM

• Pumps up to 600 GPH @ 0’• Protect your basement from water...with water!!• Corrosion-resistant, thermoplastic back-up pump system

is powered by municipal water pressure. No electricity or batteries required!

• Automatic switch with anti-siphon vacuum breaker• Adjustable float switch for automatic operation• Corrosion-resistant thermoplastic construction for long life

WIRELESS BACK-UP MONITORING SYSTEM

• For complete basement protection, add the perfect compliment to your primary sump pump system

• Alarm and visual indicators lets homeowner know water level has risen• System receiver can monitor up to four locations in your home,

for added security. (Additional transmitters sold separately)

• Reliable reed float switch for automatic operation• Designed for easy installation

S YSTEM INCLUDES: • 3 V lithium battery • Transmitter (additional transmitters sold separately) • Reed float switch assembly • Receiver • Transformer • (3) Zip ties • Short tube • Clip

12 VOLT BATTERY BACK-UP SYSTEM• Pumps up to 1750 GPH @ 0’• Reinforced, corrosion-resistant, thermoplastic battery back-up

sump pump system• Reliable reed float switch for automatic operation• Professional grade back-up system keeps battery properly charged



• Designed for easy installation

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y22

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

ESP15EWP10

WSA120

ESP25

T E C H N O L O G Y


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y55

SUMP PUMPSsubmersible

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y55 STAINLESS STEEL AND CAST IRON WITH VERTICAL FLOAT SWITCH

• Pumps up to 4600 GPH @ 0’• Durable, cast iron and stainless steel submersible sump pump• Vertical float switch for automatic operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Stainless steel, high performance 3/4 HP motor• 1½” NPT discharge and durable cast iron base• Float guard protects switch from hang-ups• 3/4 HP motor rated 10 Amps• Designed for 11” diameter or larger sump basins• Approximate on level @ 9” - off level @ 4”®

CDU980E

3/4 HP ENERGY EFFICIENT, STAINLESS STEEL AND CAST IRON SUMP PUMP WITH VERTICAL FLOAT SWITCH

• PUMP MORE WATER USING 50% LESS ENERGY!• HANDYMAN Club Of America Tested and Recommended!• Pumps up to 4600 GPH @ 0’• Durable, cast iron and stainless steel submersible sump pump• Vertical float switch for automatic operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Stainless steel, energy efficient 3/4 HP motor• 1½” NPT discharge and durable cast iron base• Float guard protects switch from hang-ups• 3/4 HP motor rated 4.0 Amps• Designed for 11” diameter or larger sump basins• Approximate on level @ 9” - off level @ 4”

PERFORMANCEModel HP Discharge Head 5’ 10’ 15’ 20’

CDU980E 3/4 Gallons/Hour 4300 3500 2550 1100

EE980 3/4 Gallons/Hour 4300 3500 2550 1100

25

20

15

10

5

04000300020001000 5000

CDU980E EE980

FLOW RATE IN GPH


®

EE980

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33


CDU800 1/2 Gallons/Hour 3900 3150 2100 600

CDU790 1/3 Gallons/Hour 3450 2700 1700 100

EE800 1/2 Gallons/Hour 3900 3150 2100 600

EE790 1/3 Gallons/Hour 3450 2700 1700 100

25

20

15

10

5

04000300020001000 5000


FLOW RATE IN GPH

ENERGY EFFICIENT, CAST IRON WITH VERTICAL FLOAT SWITCH

• PUMP MORE WATER USING 50% LESS ENERGY!• SAVE UP TO $75 ANNUALLY!• 1/2 HP pumps up to 4200 GPH @ 0’ (EE800)

1/3 HP pumps up to 3800 GPH @ 0’ (EE790)• Durable, cast iron submersible sump pump• Vertical float switch for automatic operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Epoxy-coated, high performance motor• 1½” NPT discharge and durable cast iron base• Float guard protects switch from hang-ups• Designed for 11” diameter or larger sump basins• 1/2 HP motor rated 3.8 Amps

1/3 HP motor rated 3.65 Amps• Approximate on level @ 9” - off level @ 4”

CAST IRON WITH VERTICAL FLOAT SWITCH

• 1/2 HP pumps up to 4200 GPH @ 0’ (CDU800) 1/3 HP pumps up to 3800 GPH @ 0’ (CDU790)

• Durable, cast iron submersible sump pump• Vertical float switch for automatic operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Epoxy-coated, high performance motor• 1½” NPT discharge and durable cast iron base• Float guard protects switch from hang-ups• Designed for 11” diameter or larger sump basins• 1/2 HP motor rated 10 Amps

1/3 HP motor rated 9.5 Amps• Approximate on level @ 9” - off level @ 4”

CDU800 EE800

CDU790 EE790

®

®

CDU800

EE800

CDU790

EE790


CAST IRON WITH TETHER FLOAT SWITCH

• 1/2 HP pumps up to 4200 GPH @ 0’ (CDT50) 1/3 HP pumps up to 3800 GPH @ 0’ (CDT33)

• Durable, cast iron submersible sump pump• Piggy-back tether float switch for automatic or manual operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Epoxy-coated, high performance motor• 1½” NPT discharge and durable cast iron base• Designed for 14” diameter or larger sump basins• Approximate on level @ 13” - off level @ 7”

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y22


CDT50 1/2 Gallons/Hour 3900 3150 2100 600

CDT33 1/3 Gallons/Hour 3450 2700 1700 100


SSPF50 1/2 Gallons/Hour 3600 2800 1800 500

SSPT50 1/2 Gallons/Hour 3600 2800 1800 500

25 25

20 20

15 15

10 10

5 5

0 04000 40003000 30002000 20001000 10005000 5000



FLOW RATE IN GPH FLOW RATE IN GPH

CDT50

CDT33

®

CDT50 CDT33

SSPF50 SSPT50

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33

STAINLESS STEEL AND THERMOPLASTIC WITH TETHER FLOAT SWITCH

• Pumps up to 3900 GPH @ 0'• Rugged, stainless steel and corrosion-resistant thermoplastic

submersible sump pump• Piggy-back tether float switch for automatic or manual operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• High performance motor• 1½” NPT discharge and reinforced thermoplastic base• Designed for 14” diameter or larger sump basins• Approximate on level @ 13” - off level @ 7”

STAINLESS STEEL AND THERMOPLASTIC WITH VERTICAL FLOAT SWITCH

• Pumps up to 3900 GPH @ 5’• Rugged, stainless steel and corrosion-resistant thermoplastic

submersible sump pump• Vertical float switch for automatic operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Float guard protects switch from hang-ups• High performance 1/2 HP motor• 1½” NPT discharge and reinforced thermoplastic base• Designed for 11” diameter or larger sump basins• Approximate on level @ 9” - off level @ 4”

®

®

SSPF50

SSPT50


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

THERMOPLASTIC WITH TETHER FLOAT SWITCH

• 1/2 HP pumps up to 3900 GPH @ 0’ (SPT50) 1/3 HP pumps up to 3600 GPH @ 0’ (SPT33)

• Reinforced, corrosion-resistant thermoplastic submersible sump pump• Piggy-back tether float switch for automatic or manual operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Epoxy-coated steel, high performance motor• 1½” NPT discharge and reinforced thermoplastic base• Designed for 14” diameter or larger sump basins• Approximate on level @ 13” - off level @ 7”

THERMOPLASTIC WITH VERTICAL FLOAT SWITCH

• Pumps up to 2900 GPH @ 0’• Reinforced, corrosion-resistant thermoplastic submersible sump pump• Piggy-back vertical float switch for automatic operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Easy carry handle for portability• High performance motor• 1½” NPT discharge and reinforced thermoplastic base• Designed for 11” diameter or larger sump basins• Approximate on level @ 7” - off level @ 3”


• 1/2 HP pumps up to 2900 GPH @ 0’ (WST50) 4/10 HP pumps up to 2500 GPH @ 0’ (WST40) 3/10 HP pumps up to 2300 GPH @ 0’ (WST30)

• Reinforced, corrosion-resistant thermoplastic submersible sump pump• Piggy-back tether float switch for automatic operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Easy carry handle for portability• High performance motor• 1½” NPT discharge and reinforced thermoplastic base• Designed for 14” diameter or larger sump basins• Approximate on level @ 14” - off level @ 7”


• 1/2 HP pumps up to 3900 GPH @ 0’ (SPF50) 1/3 HP pumps up to 3600 GPH @ 0’ (SPF33)

• Reinforced, corrosion-resistant thermoplastic submersible sump pump• Vertical float switch for automatic operation• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Float guard protects switch from hang-ups• Epoxy-coated steel, high performance motor• 1½” NPT discharge and reinforced thermoplastic base• Designed for 11” diameter or larger sump basins• Approximate on level @ 9” - off level @ 4”



WSF50 1/2 Gallons/Hour 2700 2200 1400 400

WST50 1/2 Gallons/Hour 2700 2200 1400 400

WST40 4/10 Gallons/Hour 2250 1900 1200 250

WST30 3/10 Gallons/Hour 2100 1400 800 100

25

20

15

10

5

04000300020001000 5000


FLOW RATE IN GPH

WSF50 WST50

WST30

WST40

®

®


SPF50 1/2 Gallons/Hour 3600 2800 1800 500

SPF33 1/3 Gallons/Hour 3300 2500 1400 100

SPT50 1/2 Gallons/Hour 3600 2800 1800 500

SPT33 1/3 Gallons/Hour 3300 2500 1400 100

25

20

15

10

5

04000300020001000 5000

SPF50 SPT50

SPF33 SPT33


FLOW RATE IN GPH

®

®

SPF50 WSF50SPF33

WST30

WST50 WST40

SPT50 SPT33


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y22CAST IRON WITH VERTICAL FLOAT SWITCH

• 1/2 HP pumps up to 5000 GPH @ 0’ (SPV800) 1/3 HP pumps up to 4080 GPH @ 0’ (SPV500)

• Durable, cast iron pedestal sump pump• Adjustable vertical float switch allows for easy changes in operating

cycle to fit application• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• High performance motor• Durable epoxy-coated steel column• 1½” NPT discharge and durable cast iron base• Will replace most submersible sumps without any plumbing changes• Designed for 14” diameter or larger sump basins


• 1/2 HP pumps up to 4400 GPH @ 0’ (PTU50) 1/3 HP pumps up to 3200 GPH @ 0’ (PTU30)

• Reinforced, corrosion-resistant thermoplastic pedestal sump pump• Adjustable vertical float switch allows for easy changes in operating

cycle to fit application• Top suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• High performance motor• Corrosion resistant reinforced thermoplastic construction• 1½” NPT discharge and durable cast iron base• Will replace most submersible sumps without any plumbing changes• Designed for 14” diameter or larger sump basins

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

SUMP PUMPSsubmersible | pedestal


RSP130 1/3 Gallons/Hour 3060 2820 2460 1500

25

20

15

10

5

04000300020001000 5000


FLOW RATE IN GPH

RSP130


• 1/3 HP pumps up to 3060 GPH @ 5’• Reinforced, corrosion-resistant thermoplastic submersible sump pump• Piggy-back tether float switch for automatic operation• Side suction design filters debris and minimizes clogging• Designed for easy installation without any plumbing changes• Stainless steel ring for portability• High performance 1/3 HP motor• 1½” NPT discharge and reinforced thermoplastic base• Designed for 14” diameter or larger sump basins• Approximate on level @ 14” - off level @ 7”

®

®

®

RSP130


SPV800 1/2 Gallons/Hour 4500 3800 2900 1500

SPV500 1/3 Gallons/Hour 3180 2160 780 0

PTU50 1/2 Gallons/Hour 4200 3800 2900 1500

PTU30 1/3 Gallons/Hour 2800 2270 1640 530

25

20

15

10

5

04000300020001000 5000


SPV800

SPV500

PTU50

PTU30

FLOW RATE IN GPH

SPV800 SPV500

PTU50 PTU30


WHAT IS A UTILITY PUMP? These portable pumps range in use from everyday applications around your home to occasional use. Some typical applications include removing standing water off basement floors or construction sites, draining aquariums and water beds, emptying basement window wells, and boosting water pressure to wash a car.

WHY USE A UTILITY PUMP? Utility pumps can be a submersible or non-submersible design, and make water moving tasks around the home or farm easier. Electric utility pumps are perfect for everyday household use. Gasoline-powered pumps are designed for more portable farm and commercial uses.

HOW CAN A UTILITY PUMP WORK FOR YOU? Electric utility pumps empty clogged sinks, drain flooded basements, bail boats, boost water pressure, and more. Gasoline-powered utility pumps work well for irrigation, construction, fire fighting and many other applications.

HOW MUCH HORSEPOWER (HP) DO YOU NEED? In general, the more horsepower, the better. Pump performance depends on how high and how fast you want to pump the water.

COMMON UTILITY PUMP APPLICATIONS

HOW DO I OPERATE MY UTILITY PUMP?

SUBMERSIBLE UTILITY PUMPS

TRANSFER PUMPS

GASOLINE-POWERED PUMPS

UTILITY PUMPSanswer guide

APPLICATION HIGHLIGHTS: Pump should be located on a level solid foundation. Submerge in two inches of water to properly prime pump and keep pump inlet screen clear. Attach discharge pipe into pump body. To utilize a garden hose, install the garden hose adapter provided with the pump. Run discharge pipe/hose away from the pump.Plug into the power source and turn pump on, once all connections are complete.

APPLICATION HIGHLIGHTS: Pump should be located on a level solid foundation. Attach suction hose and discharge pipe into pump body.To utilize a garden hose, install the garden hose adapter provided with the pump. Run discharge pipe/hose away from the pump.Plug into the power source and turn pump on, once all connections are complete.

APPLICATION HIGHLIGHTS: Place the pump close to the liquid being pumped. Attach suction hose and fitting tightly. Attach discharge hose. Suction lines must be a rigid pipe or reinforced hose. (See accessories section).Add a check valve to the suction line to maintain the self priming capability. Use a suction strainer if you are pumping abrasive material. Keep all pipe and hose lines as short and straight as possible.Fill the engine crankcase with the recommended grade of oil. Fill the engine fuel tank with the recommended grade of gasoline. Add water to the priming port on the pump, until it’s approximately 3 inches from the top.Install the priming plug and start engine.

Removes standing water Empties clogged sinks Drains window wells or other problem areas





YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33

4 HP TRANSFER PUMP

• Pumps up to 7200 GPH @ 0’• Rugged, cast iron, gasoline-powered water transfer utility pump• 4-cycle high pressure pump passes 3/8" solids• 2" NPT suction/discharge for easy connection to

standard discharge hose• Viton mechanical shaft seal for compatibility with most

agricultural chemicals• Heavy-duty aluminum handle for portability• Passes up to 3/8” solids• Easy-priming outlet• 1 gallon gas reservoir• Cast iron volute and impeller

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33

4.0 HP SEMI-TRASH PUMP

• Pumps up to 9600 GPH @ 0’• Rugged, aluminum and cast iron, gasoline-powered

water transfer utility pump• OHV 4-cycle honda engine passes up to 1/2" solids• 2” NPT suction/discharge for easy connection to

standard discharge hose• Heavy-duty water transfer pump you can take anywhere• Heavy-duty aluminum roll cage and pump housing

protect and provide stability• Passes up to 1/2” solids• 1 gallon gas reservoir• Cast iron pump casing and impeller

5.5 HP SEMI-TRASH PUMP

• Pumps up to 16,800 GPH @ 0’• Rugged, aluminum and cast iron, gasoline-powered water

transfer utility pump• OHV 4-cycle honda engine passes up to 5/8" solids• 3” NPT suction/discharge for easy connection

to standard discharge hose• Heavy-duty water transfer pump you can take anywhere• Heavy-duty aluminum roll cage and pump housing protect

and provide stability• Passes up to 5/8" solids• 1 gallon gas reservoir• Cast iron pump casing and impeller

UTILITY PUMPSgasoline-powered

GPS400


GPH550 5.5 Gallons/Hour 16,800 14,440 12,000 9000

GPH400 4 Gallons/Hour 9600 9000 7800 5300

100

80

60

40

20

020,00015,00010,0005000 25,000

GPH550

GPH400

FLOW RATE IN GPH


GPH550


GPS400 4 Gallons/Hour 7200 6600 5640 4080

100

80

60

40

20

08000600040002000 10,000

GPS400

FLOW RATE IN GPH


GPH400


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11 ENERGY EFFICIENT, AUTO ON/OFF WATER REMOVAL PORTABLE PUMP

• iSwitch™ sensing technology turns the pump on and off automatically with the presence of water

• 1/4 HP pumps up to 3000 GPH @ 0’• Energy efficient, high flow 1/4 HP oil-free motor• Corrosion-resistant, sealed thermoplastic construction for submersible use• 1¼” discharge with garden hose adapter included• Bottom suction design filters debris and removes water down to 3/8” of surface• Designed to perform in applications such as draining flooded basements, emptying

water filled boats and removing water from sinks, stock tanks, and flat roofs• 1/4 HP motor rated 2.5 Amps

VIP50

TSC130

VIP25

TSC160

VIP15

UTILITY PUMPSsubmersible

RUP160

OIL-FREE MULTI-PURPOSE PUMP

• Pumps up to 660 GPH @ 0’• Oil-free reinforced thermoplastic submersible utility pump• Corrosion-resistant thermoplastic motor housing, volute, and impeller• Bottom suction design removes water down to 1/8” of surface• 3/4” garden hose thread• Oil-free design protects aquatic life• Easy-access handle for complete portability• Ideal for draining aquariums, clogged sinks, or removing standing water

THERMOPLASTIC NON-CLOGGING VORTEX PUMP

• 1/2 HP pumps up to 2500 GPH @ 0’ (VIP50) 1/4 HP pumps up to 1800 GPH @ 0’ (VIP25) 1/5 HP pumps up to 1700 GPH @ 0’ (VIP15)

• Corrosion-resistant, reinforced thermoplastic motor housing, volute, and impeller• Bottom suction design filters debris and removes water down to 1/8" of surface• Passes up to 1/2” solids• 1¼” NPS high volume discharge with 3/4" garden hose adapter• Easy-access handle for portability

HEAVY-DUTY SUBMERSIBLE PUMP

• 1/4 HP pumps up to 1050 GPH @ 0’ (TSC130) 1/6 HP pumps up to 950 GPH @ 0’ (TSC160)

• Reinforced thermoplastic submersible utility pump• Corrosion-resistant, reinforced thermoplastic motor housing, volute and impeller• Bottom suction design removes water down to within 1/8” of surface• 3/4” bronze discharge adapter connects to standard garden hose (TSC130)

3/4” plastic discharge adapter connects to standard garden hose (TSC160)• Top center 3/4” discharge design provides balanced installation• Stainless steel ring handle for easy portability

®

25

20

15

10

5

015001000500250 2000


FLOW RATE IN GPH

TSC130

TSC160

GFU110

25

20

15

10

5

02500200015001000 3000

FLOW RATE IN GPH


VIP50

VIP25

VIP15


TSC130 1/4 Gallons/Hour 1050 900 860 730

TSC160 1/6 Gallons/Hour 950 825 790 660

Model HP Discharge Head 0’ 2’ 4’ 6’

GFU110 1/10 Gallons/Hour 660 540 420 300


EEAUP250 1/4 Gallons/Hour 3000 2600 1850 900

RUP160 1/6 Gallons/Hour 3000 2600 1850 900

VIP50 1/2 Gallons/Hour 2500 2040 1550 800

VIP25 1/4 Gallons/Hour 1800 1320 1020 500

VIP15 1/5 Gallons/Hour 1700 1200 780 300

EEAUP250 RUP160

GFU110

THERMOPLASTIC OIL-FREE SUBMERSIBLE PUMP

• 1/6 HP pumps up to 3000 GPH @ 0’• Reinforced thermoplastic oil-free submersible utility pump• Corrosion-resistant thermoplastic housing, volute, and impeller• Bottom suction design filters and removes water down to 3/8" of surface• 1¼” NPS discharge with 3/4" garden hose adapter included• Oil-free design protects aquatic life• Designed to perform in applications such as draining flooded basements, emptying

water filled boats and removing water from sinks, stock tanks, and flat roofs

EEAUP250

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

®


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

UTILITY PUMPStransfer | condensateCAST IRON TRANSFER PUMP

• 1/2 HP pumps up to 1450 GPH @ 0’ (40 PSI)• Boosts line pressure up to 40 PSI• Rugged, cast iron pump housing and motor for durability easy-priming outlet• Portable transfer pump you can take anywhere• 3/4” brass hose adapters connect to standard garden hose• Applications include drainage, dewatering flooded basements, emptying stock

tanks, draining cooled water heaters, and charging polyglycol radiant heating lines• PC4K kit includes: 1/2 HP cast iron transfer pump, reinforced thermoplastic

storage case, suction strainer, and (2) 3/4” brass hose adapters

115 VOLT TRANSFER PUMP

• Pumps up to 340 GPH @ 0’• 3/4” chrome-plated bronze suction/discharge for easy connection to standard garden hose• Removes water down to 1/8” of surface when water suction attachment is connected• Portable and lightweight transfer pump you can take anywhere• Includes 6’ suction hose, water suction attachment, and replacement parts kit.


WCP85 Gallons/Hour 85 74 54 33 -

40

30

20

10

5

0100755025 125

WCP85

FLOW RATE IN GPH


CONDENSATE PUMP

• Pumps up to 85 GPH @ 0’• Reinforced, corrosion-resistant, thermoplastic condensate pump• Transfers condensation from air conditioners and HVAC systems

to a nearby drain• 3/8" discharge with built-in check valve• Safety switch shuts off during power failures• Designed for easy installation in new or existing applications• 2-quart reinforced thermoplastic reservoir

12 VOLT TRANSFER PUMP

• Pumps up to 350 GPH @ 0’• 3/4” chrome-plated bronze suction/discharge for easy connection to standard garden hose• Removes water down to 1/8” of surface when water suction attachment is connected• Easy connection to 12 volt battery with convenient on/off switch• Alligator clamps connect to battery• Includes 6’ suction hose, water suction attachment, and replacement parts kit.

DRILL PUMP

• Pumps up to 150 GPH• Durable, corrosion-resistant stainless steel shaft• Compatible with any electric drill• Effectively empties clogged sinks and washing machines, drains

aquariums, tanks, and more

DRILL POWERED FLUID TRANSFER PUMP KIT

• Drains clogged sinks, aquariums, flooded areas, flooded boats, stopped clothes washers, and car oil pans

50

40

30

20

10

0400300200100 500

FLOW RATE IN GPH


PC2

PC1


PC2 Gallons/Hour 340 300 225 80 -

PC1 Gallons/Hour 350 310 250 150 -

PERFORMANCE Discharge Pressure

Per Square InchSuction Lift

Gallons Per Hour - in feetPSI 0’ 5’ 10’ 15’

5 1450 1420 1350 1270

10 1370 1300 1230 1160

15 1250 1190 1120 1040

20 1140 1070 1000 930

25 1020 950 880 810

30 890 820 750 570

35 750 680 620 550

40 610 540 480 410

PC4

PC2

PC1

PC4K

DPFTK1

WCP85 ®

WDP21S


SEWAGE PUMPSanswer guide

WHAT IS A SEWAGE PUMP? Sewage pumps are automatic pumps used when water being pumped contains solids up to 2” in diameter. Pumping waste from a bathroom to a sewer or septic line is a common application.

HOW DO YOU PLAN TO USE THE PUMP? If you are planning to pump household sewage to a septic system or sewage line, you’ll need a sewage pump. Sewage pumps can also be used for pumping effluent, grey-water and groundwater.

WHERE DO YOU NEED TO USE THE PUMP? Sewage ejector pumps are designed to accommodate single-family homes, multiple-family homes and small commercial applications.

HOW MUCH HORSEPOWER (HP) DO YOU NEED? Generally, the amount of horsepower needed depends on the discharge rate you require from the sewage pump system. Check the pump performance charts on the next few pages.

Approximate on level @ 19”

Approximate off level @ 9”

GFCI Protected Outlet

Main Waste Line To Sewer or Septic Tank

2” Check Valve

2” Discharge Pipe Upper Level Drainage

Cleanout

Union

45˚ Elbow

45˚ Elbow

Vent Pipe

Floor Drain

Dryer Washer Washer Drain

Laundry Tub

Vent Pipe

Lavatory

Shower

Toilet

Shower Drain

HOW DO I INSTALL MY NEW SEWAGE PUMP?INSTALLATION HIGHLIGHTS: Thread the discharge pipe into the discharge connection. Attach the check valve at a 45° angle with the valve pivot on top.

Drill a 1/16” vent hole in the discharge pipe approximately 1” to 2” above the pump discharge to prevent air locking in the initial start-up, which will result in loss of prime.

Install a gate valve, after the check valve. Install a union between the pump and the check valve. It is important to keep the impeller submerged. Set the length of the tether switch to turn the pump off with 4“ of fluid still in the sewage basin. Connect the appropriate power once all connections are complete.

TOOLS NEEDED: Drill, screwdriver, pipe wrench, adjustable wrench, hacksaw, knife, and pipe clamps.

SEWAGE PUMP INSTALLATION

Min. 18” For tether

switch models

Inlet Pipe

Vent Pipe





YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

CAST IRON SEWAGE PUMP

• 3/4 HP pumps up to 8800 GPH @ 0’ (DSP75) 6/10 HP pumps up to 8200 GPH @ 0’ (DSP60)

• Durable, cast iron submersible sewage pump• Manual operation (control box or pump switch sold separately, see accessories section)• 2” NPT discharge capable of handling 2” solids• Designed for easy installation without any plumbing changes• Lower ball bearings for quiet long life• Designed for residential and light commercial sewage applications• Ideal for basement or below grade installations• 120 volt switches sold separately, see sewage accessory section• Designed for 18” diameter or larger sewage basins

120 VOLT CAST IRON COMMERCIAL PUMP

• 1/2 HP pumps up to 6900 GPH @ 15’• Commercial-grade cast iron submersible sewage pump• Manual operation (control box or pump switch sold separately, see accessories section)• 3” NPT discharge with 2” adapter capable of handling 2” solids• Designed for easy installation without any plumbing changes• Upper and lower ball bearings for quiet operation• 10 ft. power cord is oil and water resistant with neoprene

grommet for superior seal• 120 volt switches sold separately, see sewage accessory section• Designed for 18” diameter or larger sewage basins

240 VOLT CAST IRON COMMERCIAL PUMP

• 2 HP pumps up to 13,800 GPH @ 15’ (SEP8) 1 HP pumps up to 11,100 GPH @ 15’ (SEP6) 3/4 HP pumps up to 9000 GPH @ 15’ (SEP5)

• Commercial-grade cast iron submersible sewage pump• Manual operation (control box or pump switch sold separately, see accessories section)• 3” NPT discharge with 2” adapter capable of handling 2” solids• Designed for easy installation without any plumbing changes• Upper and lower ball bearings for quiet operation• 20 ft. power cord is oil and water resistant with neoprene

grommet for superior seal• Power cord on SEP5, SEP6 and SEP8 supplied without plug

for hard-wired service• 240 volt switches sold separately, see sewage accessory section• Designed for 18” diameter or larger sewage basins

SEWAGE PUMPScommercial | residential

SEP8 SEP6 DSP60SEP5 DSP75

SEP4CSE50TE

35

30

25

20

15

1012,000900060003000 15,000

SEP8

SEP6

SEP5

SEP4


PERFORMANCEModel HP Volts Discharge Head 10’ 15’ 20’ 25’

SEP8 2 240 Gallons/Hour - 13,800 12,000 9900

SEP6 1 240 Gallons/Hour 12,900 11,100 9000 7020

SEP5 3/4 240 Gallons/Hour 10,800 9000 6600 3900

SEP4 1/2 120 Gallons/Hour 9300 6900 3900 -

PERFORMANCEModel HP Volts Discharge Head 5’ 10’ 15’

DSP75 3/4 120 Gallons/Hour 8700 7020 4680

DSP60 6/10 120 Gallons/Hour 7500 6600 4500

CSE50TE 1/2 120 Gallons/Hour 6780 5280 2400

25

20

15

10

5

08000600040002000 10,000

FLOW RATE IN GPHFLOW RATE IN GPH


®

CAST IRON SEWAGE PUMP WITH PIGGY-BACK TETHER SWITCH

• 1/2 HP pumps up to 7680 GPH @ 0’• Durable, cast iron submersible sewage pump• Piggy-back tether float switch with automatic operation• 2” NPT discharge capable of handling 2” solids• Designed for easy installation without any plumbing changes• Lower ball bearings for quiet operation• Designed for residential and light commercial sewage applications• Ideal for basement or below grade installations• Designed for 18” diameter or larger sewage basins

DSP75

DSP60

CSE50TE


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

SEWAGE PUMPSresidential | systems

CAST IRON WITH TETHER SWITCH

• 1/2 HP pumps up to 5700 GPH @ 0’• Durable, cast iron submersible sewage pump• Piggy-back tether float switch for automatic or manual operation• 2” NPT discharge capable of handling 2” solids• Designed for easy installation without any plumbing changes• Easy carry ring for portability• Lower ball bearings for quiet operation• Ideal for basement or below grade installations• Designed for 18” diameter or larger sewage basins

THERMOPLASTIC SEWAGE PUMP WITH TETHER FLOAT SWITCH

• 1/2 HP pumps up to 7800 GPH @ 0’ (SEL50) 4/10 HP pumps up to 5800 GPH @ 0’ (SEL40)

• Reinforced, corrosion-resistant, thermoplastic submersible sewage pump• Piggy-back tether float switch for automatic operation• Combination 2”/3” NPT discharge capable of handling up to 2” solids• Designed for easy installation without any plumbing changes• Easy carry handle for portability• Cast iron seal plate• Lower ball bearings for quiet operation• Designed for 18” diameter or larger sewage basins


RPP50 1/2 Gallons/Hour 5700 4560 3240 900

SEL50 1/2 Gallons/Hour 7800 7200 6420 4200

SEL40 4/10 Gallons/Hour 5800 5400 3700 1350

25

20

15

10

5

08000600040002000 10,000

FLOW RATE IN GPH


SEL50

SEL40

RPP50

RPP50T

®

SEL50 SEL40

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11CAST IRON SEWAGE EJECTOR SYSTEM

• 6/10 HP pumps up to 8200 GPH @ 0’• Durable, cast iron submersible sewage pump• Manual operation (Control box or pump switch sold separately)• 2” NPT discharge capable of handling 2” solids• Easy carry ring for portability• Lower ball bearings for quiet operation and long life• 18” x 30” sewage basin• Job ready for easy installation


SYDSP60 6/10 Gallons/Hour 8200 7500 6000 4000

25

20

15

10

5

08000600040002000 10,000

SYDSP60

FLOW RATE IN GPH


SYDSP60

®


SYSSEL40 SYSEL40

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

SEWAGE PUMPS systems | effluent

CORROSION-RESISTANT THERMOPLASTIC SEWAGE EJECTOR SYSTEM

• 4/10 HP pumps up to 5800 GPH @ 0’• Reinforced, corrosion-resistant, thermoplastic submersible sewage pump• Piggy-back tether float switch for automatic or manual operation• Combination 2”/3” NPT discharge capable of handling up to 2” solids• Cast iron seal plate• Lower ball bearings for quiet operation• 18” x 30” sewage basin• 2” vent opening in cover (unassembled)• Job ready for easy installation

CORROSION-RESISTANT THERMOPLASTIC SEWAGE EJECTOR SYSTEM

• 4/10 HP pumps up to 5800 GPH @ 0’• Reinforced, corrosion-resistant, thermoplastic submersible sewage pump• Piggy-back tether float switch for automatic or manual operation• Combination 2”/3” NPT discharge capable of handling up to 2” solids• Cast iron seal plate• Lower ball bearings for quiet operation• 18” x 30” sewage basin• 3” vent opening in cover (preassembled)• Job ready for easy installation

®

®

SYSEL40

SYSSEL40

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11THERMOPLASTIC EFFLUENT PUMP WITH TETHER FLOAT SWITCH

• 1/3 HP pumps up to 5700 GPH @ 0’• Reinforced, corrosion-resistant, thermoplastic submersible effluent pump• Piggy-back tether float switch for automatic or manual operation• Combination 2”/3” NPT discharge capable of handling 3/4” solids• Designed for easy installation without any plumbing changes• Easy carry handle for portability• Cast iron seal plate• Lower ball bearings for quiet operation• Designed for domestic septic tank and gray water applications• Designed for 18” diameter or larger basins

CAST IRON EFFLUENT PUMP WITH TETHER SWITCH

• 1/3 HP pumps up to 3900 GPH @ 0’• Durable, cast iron submersible effluent pump• Piggy-back tether float switch for automatic or manual operation• 2” NPT discharge capable of handling up to 3/4” solids• Designed for easy installation without any plumbing changes• Easy carry ring for portability• Upper ball bearings for quiet operation• Designed for domestic septic tank and gray water applications• Designed for 18” diameter or larger basins


EFL30 1/3 Gallons/Hour 3900 3480 2900 2280

EFL33 1/3 Gallons/Hour 5700 5300 3600 1300

25

20

15

10

5

06000450030001500 7500

EFL33

EFL30

FLOW RATE IN GPH


EFL33

EFL30


SYSSEL40 4/10 Gallons/Hour 5800 5400 3700 1350

SYSEL40 4/10 Gallons/Hour 5800 5400 3700 1350

25

20

15

10

5

08000600040002000 10,000

FLOW RATE IN GPH



WHAT IS A WELL PUMP? Well pumps are used to deliver water from an underground water source to your home. We offer three types of well pumps: shallow well jet pumps, convertible well jet pumps, and deep well submersible pumps. Shallow well jet and convertible well jet pumps are NOT submersible and are usually placed outside the well in a well housing. Deep well submersible pumps are submerged inside your well.

HOW DEEP IS YOUR WELL? Shallow well jet pumps can pump water from 0’ to 25’ deep. Convertible well jet pumps pump water from 0’ to 90’ deep. A convertible well jet pump can operate between 0’ to 25’ with a shallow jet well nozzle or between 25’ to 90’ deep with an ejector assembly. Deep well submersible pumps attach to the bottom of the drop pipe and can operate in wells from 20’ up to 300’ deep.

WHAT IS THE DIAMETER OF YOUR WELL CASING? The diameter of your well casing determines what type of well pump you need. If you do not have a well casing, you have a Shallow Well. Some well casings are 2” and require special accessories with a convertible jet well pump. If your well casing is 4” or more in diameter, you can use either a jet well pump or deep well submersible pump, depending on the depth of your well.

Well Depth Recommended Pumps Well Casing Diameter

Required Ejector Assembly

0’ - 25’Shallow Well Jet Pump

Convertible Well Jet PumpDeep Well Submersible

N/AN/A

Minimum 4”

NoneShallow Well Nozzle

None

25’ - 90’Convertible Well Jet PumpConvertible Well Jet Pump

Deep Well Submersible

2”4”

Minimum 4”

2” Diameter 25’ - 90’ Deep4” Diameter 25’ - 90’ Deep

None

90’ - 300’ Deep Well Submersible Minimum 4” None

HOW MUCH HORSEPOWER (HP) DO YOU NEED? If you’re replacing a well pump, and your water needs haven‘t changed, select a pump with the same horsepower and voltage. You may need more horsepower if you’ve added a household member or a major appliance since installing your current pump. Larger pumps may also require larger pressure tanks to prevent rapid cycling.

WHAT IS THE DIFFERENCE BETWEEN A 2-WIRE AND 3-WIRE PUMP? Deepwell submersible pumps are classified by the number of wires connected to the pump’s motor. 2-Wire (plus ground) pumps do not require the use of a control box. For 3-wire pumps (plus ground), the start capacitor is located away from pump above ground, and therefore requires the use of a control box. WAYNE has three control box models available. NOTE: Make sure the Control Box is compatible with your pump.

INSTALLATION HIGHLIGHTS: Bolt the unit to a level place on the floor or onto the mounting bracket on your tank. Connect all piping to the well. A shallow well jet pump will have one pipe running between the pump and the water supply. This pipe ends with a foot valve in the well and will keep water in the pipe once the system has been primed.After the well pipes are attached to the pump, connect the pipe between the pump discharge and the tank.Connect the appropriate power to the jet pump once all piping connections are complete. Follow the instruction manual guidelines to prime the pump.

TOOLS & ACCESSORIES NEEDED: Pressure gauge, foot valve, screwdriver, pipe wrench, adjustable wrench, wire cutters, wire strippers, hacksaw, knife, and pipe clamps.

INSTALLATION HIGHLIGHTS: Bolt the unit to a level place on the floor or onto the mounting bracket on your tank. Connect all piping to the well. The convertible well jet pump has one pipe running between the pump and the water supply (the suction pipe), and an additional pipe between the pump and the ejector assembly (the drive pipe). This additional pipe helps the pump draw water from wells up to 90 feet deep.A foot valve is also required in the well to maintain prime in the well pipe. After the well pipes are attached to the pump, connect the pipe between the pump discharge and the tank. Connect the appropriate power to the jet pump once all piping connections are complete. Follow the instruction manual guidelines to prime the pump.

TOOLS & ACCESSORIES NEEDED: Pressure gauge, screwdriver, pipe wrench, adjustable wrench, wire cutters, wire strippers, hacksaw, knife, and pipe clamps.

INSTALLATION HIGHLIGHTS: Connect the appropriate wiring to the pump using a splice kit. Attach the pump to the discharge pipe. Attach a safety rope to pump and begin lowering into the well. Connect additional pipe as needed while lowering the unit into the well casing until the pump is positioned 10 to 20 feet below the water level. Add a well cap to support the pipe and prevent well contamination. Lastly, connect the wiring from the pump to the pressure switch and control panel.

TOOLS NEEDED: Hacksaw, screwdriver, pliers, hammer, (2) pipe wrenches, adjustable wrench, wire cutters, wire strippers, propane torch, plastic tape, knife, cord/rope/fishing line, small weight, tripod, pipe clamps, block and tackle for pulling and lowering heavier pump and piping into ground.

WHICH TYPE OF WELL PUMP DO YOU NEED?

SHALLOW WELL JET PUMP

• Wells less than 25’ deep• Overload protected to prevent

motor burnout• Durable cast iron construction

CONVERTIBLE WELL JET PUMP

• Wells up to 90’ deep• Overload protected to prevent

motor burnout• Durable cast iron construction

DEEP WELL SUBMERSIBLE PUMP

• Wells from 20’ - 300’ deep• Overload protected to prevent

motor burnout• Durable stainless steel construction

HOW DO I INSTALL MY NEW WELL PUMP?Proper installation is critical to a safe and long-lasting well pump system. Be sure that you follow the complete installation instructions included with your new well pump. Make sure the water sources and piping are clear of sand and other debris that could clog the pump. To prevent unnecessary wear, be sure to protect the pump from freezing and never run the pump dry.

Shallow Jet Well Nozzle 2” Ejector Assembly 4” Ejector Assembly

WELL PUMPSanswer guide


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y33CAST IRON CONVERTIBLE WELL JET PUMPS

• 1 HP pumps up to 528 GPH @ 5’ Depth - (50 PSI) (CWS100) 3/4 HP pumps up to 408 GPH @ 5’ Depth - (50 PSI) (CWS75) 1/2 HP pumps up to 348 GPH @ 5’ Depth - (50 PSI) (CWS50)

• For wells 0’ - 90’ in depth• Dual voltage (120/240) high efficiency square flange motor

(Factory wired for 120 volts)• Pressure switch is pre-set at 30-50 PSI for automatic operation• 3/4” NPT discharge with 1¼” NPT suction, and 1" drive • Dedicated priming port for volute filling• Durable cast iron volute

CAST IRON CONVERTIBLE WELL JET PUMP

• 1/2 HP pumps up to 278 GPH @ 5’ (50 PSI)• For wells 0’ - 90’ in depth• Dual voltage (120/240) high efficiency square flange motor

(Factory wired for 120 volts)• 3/4” NPT discharge with 1¼” NPT suction, and 1" drive• Pressure switch is pre-set at 30-50 PSI for automatic operation• Dedicated priming port for volute filling• Durable cast iron volute

CAST IRON SHALLOW WELL JET PUMPS

• 1 HP pumps up to 558 GPH @ 5’ Depth - (50 PSI) (SWS100) 3/4 HP pumps up to 468 GPH @ 5’ Depth - (50 PSI) (SWS75) 1/2 HP pumps up to 384 GPH @ 5’ Depth - (50 PSI) (SWS50)

• For wells 0’ - 25’ in depth• Dual voltage (120/240) high efficiency square flange motor

(Factory wired for 120 volts)• 3/4” NPT discharge with 1¼” suction• Pressure switch is pre-set at 30-50 PSI for automatic operation• Dedicated priming port for volute filling• Durable cast iron volute

CAST IRON SHALLOW WELL JET PUMP

• 1/2 HP pumps up to 288 GPH @ 5’ Depth - (50 PSI)• For wells 0’ - 25’ in depth• Dual voltage (120/240) high efficiency square flange motor

(Factory wired for 120 volts)• 3/4” NPT discharge with 1¼” suction• Pressure switch is pre-set at 30-50 PSI for automatic operation• Dedicated priming port for volute filling• Durable cast iron volute

WELL PUMPSshallow well | convertible well

SWS100 CWS100SWS75 CWS75SWS50 CWS50

JSU50 JCU50

PERFORMANCEModel HP PSI 0’ 5’ 10’ 15’ 20’ 25’

SWS100 1

30 990 960 930 900 870 810

40 840 810 780 720 690 618

50 630 558 510 450 372 300

SWS75 3/4

30 840 810 792 768 732 690

40 720 690 660 624 570 510

50 510 468 420 372 306 240

SWS50 1/2

30 750 720 672 630 600 570

40 600 570 528 492 450 408

50 420 384 348 300 240 180

JSU50 1/2

30 684 654 624 588 552 522

40 522 492 438 402 354 312

50 324 288 252 210 162 108

PERFORMANCEModel HP PSI 0’ 10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’ 90’

CWS100 1

30 1056 948 846 750 642 516 384 294 234 180

40 840 750 642 528 384 294 234 180 126 72

50 588 444 330 264 234 180 126 72 - -

CWS75 3/4

30 990 906 774 630 510 408 306 246 186 54

40 780 630 510 408 306 246 186 114 54 -

50 462 330 270 216 156 90 - - - -

CWS50 1/2

30 900 780 690 570 456 348 270 180 90 -

40 660 570 450 348 270 180 90 - - -

50 408 300 210 150 60 - - - - -

JCU50 1/2

30 790 680 590 480 380 280 180 80 0 -

40 560 460 360 260 160 60 - - - -

50 325 230 130 30 - - - - - -


YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11 YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

CONVENTIONAL AIR TANK SYSTEMS

At home, at the lake, or on the farm, WAYNE’s standard tank pump systems provide dependable, low cost performance. They’re easy to install and feature epoxy coating for superior corrosion resistance. Systems include a pump, pressure switch, air volume control, and tubing.

PRECHARGED AIR TANK SYSTEMS

WAYNE’s precharged air tank systems are highly reliable and capable of maintaining a water supply equal to conventional tanks twice their size. All tanks include premium grade bladders or diaphragms, which eliminate the problem of water-logged tanks.

DEEP WELL SUBMERSIBLE PUMP

• 1 HP pumps up to 541 GPH @ 100’ (50 PSI) (T100S 10-2) 3/4 HP pumps up to 535 GPH @ 100’ (50 PSI) (T75S 10-2 / T75S 10-4) 1/2 HP pumps up to 165 GPH @ 100’ (50 PSI) (T50S 10-2 / T50S 10-4 / T51S 10-4)

• Corrosion-resistant stainless steel motor enclosure, pump shell, and fasteners• Heavy-duty, reinforced thermoplastic impellers, diffusers, intake screen, and check valve• High efficiency, hermetically sealed motor is thermally protected to prevent overheating• 1¼” NPT discharge• Submersible design eliminates the need for priming and creates quiet operation

PERFORMANCE WELL DEPTH

HP PSI 20’ 40’ 60’ 80’ 100’ 120’ 140’ 175’ 200’ 225’ 250’ 275’

40 731 696 660 624 586 547 506 427 365 296 220 136

1 50 690 655 618 580 541 499 455 370 302 226 143 50

60 649 612 574 535 493 448 400 307 232 149 58 -

40 813 770 724 672 614 547 468 299 148 - - -

3/4 50 763 716 664 604 535 455 362 160 - - - -

60 708 655 594 524 442 346 234 - - - - -

40 702 631 549 451 332 190 - - - - - -

1/2 50 619 535 434 312 165 - - - - - - -

60 520 416 291 140 - - - - - - - -

DROP CABLE SELECTION CHARTCable Size & Length (Feet)

Model HP Type Volts 14 12 10T100S 10-2 1 3 - Wire 240 248 392 617

T75S 10-4 3/4 2 - Wire 240 293 473 740

T75S 10-2 3/4 3 - Wire 240 293 473 740

T51S 10-4 1/2 2 - Wire 120 404 641 1003

T50S 10-4 1/2 2 - Wire 240 404 641 1003

T50S 10-2 1/2 3 - Wire 240 404 641 1003

IMPORTANT! If required length falls between two wire sizes, use larger of two sizes (smaller number). CAUTION! Use of wire sizes smaller than determined WILL VOID WARRANTY.

WELL PUMPSdeep well submersible | well pump systems

Model Part No. Description

SWS50 - WX102 56909 1/2 HP shallow well system with 4.4 gallon Well-X-Trol tank

SWS50 - 30PCA 56912 1/2 HP shallow well system with 30 gallon precharged tank

SWS50 - 8.5FX 59501-WYN1 1/2 HP shallow well system with 8.5 gallon precharged tank

JSU50 - 8.5FX 58010-WYN1 1/2 HP shallow well system with 8.5 gallon precharged tank

JSU50 - WX102 58012-WYN1 1/2 HP shallow well system with 4.4 gallon Well-X-Trol tank

JSU50 - 30PCA 58013-WYN1 1/2 HP shallow well system with 30 gallon precharged tank

Model Part No. Description

SWS50 - 12P 56910 1/2 HP shallow well system with 12 gallon horizontal tank

SWS50 - 30P 56911 1/2 HP shallow well system with 30 gallon horizontal tank

JSU50 - 12P 58011-WYN1 1/2 HP shallow well system with 12 gallon horizontal tank

JSU50 - 30P 58014-WYN1 1/2 HP shallow well system with 30 gallon horizontal tank

T100S 10-2

T51S 10-4

T75S 10-4

T50S 10-4

T75S 10-2

T50S 10-2

SWS-WX102 JSU-8.5FX SWS-30P


LAWN PUMPSanswer guide

WHAT IS A LAWN PUMP? Lawn pumps are used when a lake, pond, or municipal water is pumped for irrigation. Pumping water from a lake to power lawn or garden sprinklers is the most common application.

HOW CAN A LAWN PUMP HELP? Lawn pumps are effective because they operate more than one sprinkler head at a time, and also boost total system pressure.

WHAT TYPE OF LAWN PUMP DO I NEED? The type of lawn pump you need depends on the number of sprinklers you will run, and the length and size of pipe used in your systems.

HOW IS WAYNE BETTER THAN OTHER LAWN SPRINKLING PUMPS? Our quality is the difference. Our cast iron or stainless steel pump casings provide rugged durability and resist corrosion. Benefit from it with WAYNE’S superior performance - lift water as high as 25 feet and discharge at pressures from 35 to 50 psi.

HOW MUCH HORSEPOWER (HP) DO I NEED? That depends on the discharge pressure, suction lift, and flow rate you require.

HOW DO I OPERATE MY LAWN PUMP?

APPLICATION HIGHLIGHTS: Pump should be located on a level solid foundation. Attach suction hose. Attach discharge pipe/garden hose into pump body.Run discharge pipe/hose away from the pump. Plug into the power source, and turn pump on once all connections are complete.

APPLICATION HIGHLIGHTS: Protect pump from the elements by installing in a basement, garage, tool shed or pump house. Install the pump so the center line of the pump is as close as possible to the water level. Keep installation area clear to provide access for service and maintenance.Protect the pump against flooding and excess moisture. Make sure the pump has adequate ventilation. The surrounding temperature should not exceed 100˚F (38˚C) or nuisance tripping of the motor may occur.

TOOLS & ACCESSORIES NEEDED Foot valve, screwdriver, pipe wrench, adjustable wrench, hacksaw, wire cutters, wire strippers, knife and pipe clamps.

PORTABLE LAWN PUMPS PERMANENT LAWN PUMPS

PERMANENT LAWN SPRINKLING INSTALLATION

Boost Municipal Application Well Point Application Pond or Lake Application

Check Valve Inlet Pipe

Discharge Pipe

Model HP VoltageMaximum Wire Length Using AWG Size

14 12 10 8

WLS200 2 240 170 270 430 700

WLS150 1 ½ 120/240 40/210 80/340 130/550 220/880

WLS100 1 120/240 60/280 110/440 170/710 280/1100

WLS75 3/4 120/240 60/280 110/440 170/710 280/1100

WHAT SIZE WIRE DO I NEED FOR PERMANENT INSTALLATION?

Min. 2” Under Low Watermark

Min. 1” Off Bottom

Low Water Level

Foot Valve


CAST IRON SPRINKLING PUMP

• 2 HP pumps up to 3400 @ 5’ (30 PSI) (WLS200) 1½ HP pumps up to 2900 @ 5’ (30 PSI) (WLS150) 1 HP pumps up to 2200 @ 5’ (30 PSI) (WLS100) 3/4 HP pumps up to 1750 @ 5’ (30 PSI) (WLS75)

• All motors are factory wired 240V. The 3/4, 1 and 1½ HP models include a dual voltage option.

• 2” NPT suction with 1½ ” NPT discharge for maximum water flow• Designed to operate underground sprinkling systems, draw water

from wells, lakes, or ponds for watering, pool filling, or any other applications where high water volume is needed

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11 PORTABLE STAINLESS STEEL SPRINKLING PUMP

• 1 HP pumps up to 720 GPH @ 0’• Portable, Stainless steel• Fan-cooled, continuous-duty 115-volt motor draws water up to 20'• 1” NPT suction and discharge threads, 3/4” garden hose adapter included• Safe and convenient on/off switch• 180' of total dynamic head• Maintains pressure up to 80 PSI• Easy carry handle for portability

LAWN PUMPSportable | permanent

PLS100


PLS100 1 Gallons/Hour 720 630 520 390

200

160

120

80

40

0800600400200 1000

PLS100

FLOW RATE IN GPH


PERFORMANCE @ 30 PSIModel HP Suction Lift 5’ 10’ 15’ 20’ 25’

WLS200 2 Gallons/Hour 3400 3300 2900 2600 2100

WLS150 1½ Gallons/Hour 2900 2700 2400 2100 1700

WLS100 1 Gallons/Hour 2200 1800 1600 1000 0

WLS75 3/4 Gallons/Hour 1750 1500 1250 900 0

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11 IN AND ABOVE GROUND POOL PUMP

• 1½ HP pumps up to 41,000 gallons (WIP150) 1 HP pumps up to 27,000 gallons (WIP100)

• Reinforced, corrosion-resistant, thermoplastic pool pump• Self-priming, high efficiency dual voltage motor (120/240) -

factory wired for 240-volts• Large capacity strainer with clear view lid for quick cleaning• Standard 1-1/2" NPT suction/discharge for easy installation

POOL PUMPSanswer guide | in and above ground

WIP150 WIP100

WHAT IS A POOL PUMP? Pool pumps are used to circulate water as part of a swimming pool water filtration system.

HOW MUCH HORSEPOWER (HP) DO I NEED? The necessary HP for your pool pump depends on the size of your pool. When in doubt about the size of your replacement pump, match HP with the previous model.

HOW DO I INSTALL MY NEW POOL PUMP? Pool pumps should be placed on a solid, level surface as close to a pool as possible, while complying with NEC and local codes. When installing a pool pump, locate the pump in a dry, well ventilated area away from direct sunlight. Water should never come in contact with the pump motor.

HOW DO I DETERMINE THE GALLON SIZE OF MY POOL?

HOW DO I INSTALL MY NEW POOL PUMP?INSTALLATION HIGHLIGHTS: Pool pumps are self-priming. Mount pump below water level for easy priming. If the pump must be located above the filled water level, keep the vertical distance to a minimum. Keep the piping as straight and short as possible. Slope horizontal runs upward to the pump to prevent trapping air.Use independent piping supports to alleviate strain on the pump. Install valves and unions in the pump suction and return lines to facilitate servicing. Add a check valve in the suction pipe for in-ground pumps at or below the water level and keep it fully open during operation. Plug into power source once all connections are complete.TOOLS NEEDED: Screwdriver, pipe wrench, adjustable wrench, hacksaw, knife and pipe clamps

RECTANGULAR POOLSLength (ft.)

x Width (ft.)

x Average Depth of Pool (ft.)

x 7.5

= Total Capacity of Pool in Gallons

CIRCULAR POOLSDiameter (ft.)

x Diameter (ft.)

x Average Depth of Pool (ft.)

x 5.9

= Total Capacity of Pool in Gallons

WIP150 - 1½ HP TURNOVERS / DAYRUN TIME HOURS / DAY 2 4 6

2 4500 2250 1500

4 9000 4500 3000

8 18,000 9000 6000

12 27,000 13,500 9000

24 54,000 27,000 18,000

Pool Capacity in Gallons

Note: Pump operation @ 20 PSI / 75 GPM

WIP100 - 1 HP TURNOVERS / DAYRUN TIME HOURS / DAY 2 4 6

2 3600 1800 1200

4 7200 3600 2400

8 14,400 7200 4800

12 21,600 10,800 7200

24 43,200 21,600 14,400

Pool Capacity in Gallons

Note: Pump operation @ 20 PSI / 60 GPM

WLS100

WLS200

WLS75

WLS150


LAUNDRY TRAY SYSTEM

• 1/3 HP pumps up to 3060 GPH @ 0’• Durable, reinforced, thermoplastic pump• 10 gallon capacity, durable, thermoplastic tank• 1½” NPT inlet with 1½” discharge and vent• Pre-assembled and job-ready with detailed instructions• Ideal for draining sinks, washing machines, and laundry trays

that are below the sewer line without breaking concrete• Installation 1½” check valve included

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y11

YE

A

R W

ARRA

NT

Y

YE

A

R W

ARRA

NT

Y22 MUNICIPAL WATER PRESSURE BOOSTER SYSTEM

• 1/2 HP pumps up to 384 GPH @ 5' Depth - (50 PSI)• Whole-house municipal water pressure booster system• Precharged 8.5-gallon tank has same draw-down capacity

as standard 20-gallon tank• Durable cast iron volute• Pressure switch preset at 30-50 PSI for automatic operation• Dedicated priming port for convenient volute filling• Corrosion-resistant, reinforced thermoplastic impeller and diffuser• 3/4” NPT discharge, 1¼” NPT suction

SPECIALTYbooster system | laundry tray system

SWS50BOOST


SYLT30 1/3 Gallons/Hour 3060 2820 2460 1500

25

20

15

10

5

04000300020001000 5000


FLOW RATE IN GPH

SYLT30

PERFORMANCEMODEL PSI 0' 5' 10' 15' 20' 25' 30' 40' 50' 60' 70' 80'

SWS50 BOOST

30 900 828 780 732 690 630 570 456 348 270 180 90

40 660 618 570 510 450 408 348 270 180 90 - -

50 408 384 300 270 210 180 150 60 - - - -

*Same as SWS50*

ACCESSORIESsump

1¼" CHECK VALVE AND ADAPTER

REDUCER Reduces from 1½” to 1¼”

1¼" CHECK VALVE

SUMP PUMP IMPELLER

For CDU, SPT, and SPF

1½" CHECK VALVE KIT

PEDESTAL PUMP IMPELLER

HIGH WATER ALARM Electronic water sensor with alarm

WIRELESS SUMP PUMP MONITORING SYSTEM

HOSE KITS1¼” x 24' hose kit 1½” x 24' hose kit

SWITCH KIT For CDU, SPF & SSPF

ELECTRONIC PROBE SWITCH

SWITCH KIT For Pedestal Models

TETHERED SWITCH KIT

56395

AU5ES

56396

56835-WYN1

57027-001

66002-WYN1

57028-001

60031-WYN1

66005-WYN1

56392

66032-WYN1 WSA12066000-WYN156171

T E C H N O L O G Y


2" SUCTION STRAINER

PC4 BRUSH AND HOLDER KIT

PC4 BRUSH KIT Brush kit caps only

PC2 BRUSH AND IMPELLER KIT

PC4 REPAIR KIT Brushes, caps, impeller, shaft seals, gasket, ball bearing

PC1 / PC2 IMPELLER KIT

2" HOSE KITS 3" HOSE KITS2" x 20' reinforced hose kit 3" hose and fittings kit2" x 20' reinforced hose 2" x 25' reinforced flat discharge hose

PC4 REPAIR KIT Shaft seal, impeller, gaskets

VIP 3/4" ELBOW KIT

56671AU2PS1

62015-WYN1

56397

66058-WYN1

56399

66059-WYN1

DRILL PUMP DRILL PUMP KIT

WDP21S DPFTK1

AU2HS1 AU2HD1AU2HK1 AU3HK1

62002-WYN1

ACCESSORIESutility | sewage

18” x 30” basin with 2” discharge cover

18” diameter 2” discharge cover

18” x 30” basin with 3” discharge cover

18” x 30” poly basin without discharge cover

18” diameter 3” discharge cover

SEWAGE BASINS BASIN COVERS

3" FLOW CHECK VALVE

2" FLOW CHECK VALVE

2" CHECK VALVE KIT

FLOAT SWITCH 120-volt reverse tether switch

AU5RT56805-002

56286 28486-WYN156287 28485-WYN1 28495-001

66037-WYN1 66038-WYN1


ACCESSORIESwell

JET WELL ASSEMBLIESAll WAYNE CWS jet pumps require a jet assembly to complete installation. The Shallow Well Jet Assembly mounts directly to the front of CWS pump, while the 2” and 4” Well Jet Assemblies are installed in the well itself.

56316-WYN1 55462-WYN1 55465-WYN1

56326-WYN1 56319-WYN1 56317-WYN1

56322-WYN1 56324-WYN1

SHALLOW WELL JET ASSEMBLY:Jet body, venturi, nozzle,gasket, mounting screws

2” JET ASSEMBLY:Jet body, jet packer, venturi, adapter, nozzle, foot valve

4” JET ASSEMBLY:Jet body, venturi, nozzle

PERFORMANCEModel Jet Assembly Water Lift Jet Type Drop Pipe Well Diameter

CWS50

56326-WYN1 0’ - 25’ Shallow Single -

56319-WYN1 30’ - 50’ Deep Single 2”

55462-WYN1 50’ - 70’ Deep Single 2”

56324-WYN1 30’ - 40’ Deep Double 4” Minimum



CWS75


56322-WYN1 30’ - 50’ Deep Single 2”

55462-WYN1 60’ - 80’ Deep Single 2”



CWS100


56322-WYN1 30’ - 50’ Deep Single 2”

56319-WYN1 60’ - 80’ Deep Single 2”




15522-WYN115266-WYN1

15767-WYN115596-WYN1

15591-WYN115453-WYN1

15791

15537-WYN115267-WYN1

15792-WYN1

15739-WYN115454-WYN1

15991-WYN1 66034-WYN166015-WYN1

66041-WYN166016-WYN1

66035-WYN1

66017-WYN1 66042-WYN1

2” PRESSURE GAUGESRanges available for all water systems and many field uses. Monitors system

pressure. Phosphor - bronze precision movement. One piece housing.

BRONZE FOOT VALVESFoot valves feature perforated brass strainer.

BRONZE CHECK VALVESPrecision machined, one piece, cast bronze body with

one piece poppet and high quality spring.

FOOT VALVESPart No. Well Size - ID

15266-WYN1 1”15267-WYN1 1¼”15453-WYN1 1½”15454-WYN1 2”15596-WYN1 3/4”

16262 1” x 1¼”16860 3/4” x 1”16861 1¼” x 1½”

LINE CHECK VALVESPart No. Well Size - ID

15522-WYN1 3/4’15591-WYN1 1’15537-WYN1 1¼”15739-WYN1 1½”15767-WYN1 2”

15791* 1”15792-WYN1* 1¼”

* Tapped for Submersible Deep Well Pump Installations

DELRIN COMBO VALVESCorrosion-resistant one piece molded body with exclusive poppet design

which reduces friction and increases water flow by 50%.

SPECIFICATIONSPart No. Size

66034-WYN1 1”

66035-WYN1 1¼”

66041-WYN1 3/4”

66042-WYN1 1½”

SPECIFICATIONSPart No. Diameter Range Connection

66017-WYN1 2” 0-100 PSI 1/8” Back

66016-WYN1 2” 0-200 PSI 1/4” Bottom

15991-WYN1 2” 0-100 PSI 1/8” Bottom

66015-WYN1 2” 0-100 PSI 1/4” Bottom


ACCESSORIESwell

SQUARE D PRESSURE SWITCHESFor automatic control of most domestic water systems.

SPECIFICATIONSPart No. Square D No. Pressure Setting Pipe Tap17064-001 FSG2-9013M4* 30-50 1/4”

66021-WYN1 FSG2-9013 30-50 1/4”66022-WYN1 FSG-9013 20-40 1/4”

17064-001

66021-WYN1

15679 66022-WYN1

66029-WYN1

16965-002 66025-WYN1

16966-002 66033-WYN1

16967-002 64031-WYN1

BRADY AIR VOLUME CONTROLSDiaphragm-type controls used in jet pump water systems. Maintains proper air charge

in conventional tanks. Prolongs pump life by reducing frequency of cycling. Tube and fittings package sold separately.

SPECIFICATIONSPart No. AVC No. Max. Tank Size

15679 AV-30 42 Gallons66029-WYN1 AV-45 80 Gallons

REPAIR KITSPart No. AVC No.

15785 For AV-3015786 For AV-42

TUBING ASSEMBLIESPart No. AVC No.

55653 Tubing Assembly55656 AV-45 with Tubing

1/2 HP - 230 V 20# 40# Setting

DEEPWELL SUBMERSIBLE CONTROL BOXAbove ground control boxes are used for starting and thermal protection

on single phase, 3 - wire submersible motors.

3/4 HP - 230 V 30# 50# Setting

1 HP - 230 V 30# 50# Setting

JET PUMP SWITCHES

15902-WYN1 15956-WYN1

FLOAT TYPE AIR VOLUME CONTROLSMaintains roper relation of volume of air and quantity of water in the pressure

tank. Body threaded for 1¼” tank connection. 1/4” tap for pressure gauge.

JET PUMP IMPELLERS

Type L with TubingType WJ for Deep Well

56874-002

15998

56393

17066-WYN1

17071-001

17067-001

JET PUMP REPAIR KIT Kit contains all the seals needed to repair all jet pumps.

Seals included: volute o-ring, shaft seals and nozzle o-ring.

DEEPWELL FRANKLIN MOTOR LEAD2 or 3 wire 14 gauge wire.

3-Wire Splicing Kit

JET PUMP SHAFT SEALSubmersible fittings package for precharged tanks.

DELUXE SUBMERSIBLE TORQUE ARRESTORUnique two piece design allows easy assembly. Helps center pump in any 4” through 8” well, preventing damage to drop cable, pump, and

pipe from pump starting torque. Includes stainless steel clamps.

PITLESS ADAPTERCompact pitless adapter body of red brass for submersible pump applications.

One size fits 4½” - 8” well casing with 1” drop pipe. Tested to 150 PSI.

CABLE GUARDHolds cables in place.

23285-001

SWS100, CWS100, CWS75

23285-002

SWS50, CWS75, CWS50


ACCESSORIESwell

PRECHARGED WATER SYSTEM TANKSEnamel coated steel tanks provide easy accessibility for installation. Heavy duty bladder - FDA approved material is capable of expanding 4 times its normal size.

It eliminates water-logging, corrosion, and rust as water never contacts the air in the tank. Precharged tanks deliver draw down equal to conventional tanks twice their size. Bottom discharge combats taste and odor, and allows universal replacement with 90% of market.

PRECHARGED TANK SPECIFICATIONSPart

NumberTank

DescriptionGallon

CapacityDimensions

Diameter x Height (in.)Weight

Lbs.System

Connection20/40 PSI

30/50 PSI

Optional Pump Stand

59401-001 Mounts on Pump 4.4 10” x 15” 9 3/4” NPT 1.6 1.4 None59400-001 Mounts on Pump 2.1 9” x 10¼” 5 3/4” NPT .8 .7 None59402-001 Vertical 14.0 16” x 22” 28 1” NPT 5.2 4.3 44006-00159403-001 Vertical 20.0 16” x 29” 35 1” NPT 7.4 6.2 44006-00159404-001 Vertical 32.0 16” x 43” 54 1” NPT 11.8 9.9 44007-00159405-001 Vertical 62.0 21” x 48” 82 1¼” NPT 22.9 19.2 44007-00159406-001 Vertical 88.0 26” x 45” 121 1¼” NPT 31.5 26.4 44007-001

59502-WYN1 Horizontal 8.5 12½” x 20” 15 3/4” NPT 3.1 2.6 None23224-002 Horizontal 15.04 23" x 18" 31 1” NPT 5.9 5.0 None

59402-001 59400-001

59502-WYN1

3012

59403-001 59401-001

23224-002

3022

59404-001

59405-001

59406-001

EPOXY COATED CONVENTIONAL WATER SYSTEMS TANKSPositive adhesion and corrosion resistance are provided by cold rolled steel with high strength-to-weight ratio, two separately applied high temperature

cured epoxy coatings inside and baked epoxy coating outside.

SPECIFICATIONSPart Number Tank Description Gallon Capacity Tank Dimensions Weight Lbs. System Connection 20/40

PSI30/50 PSI

3012 Horizontal 12 12 x 28 21 3/4” NPTF .9 1.23022 Horizontal 30 16 x 38 38 3/4” NPTF 4.6 3.0

INDEXsump

SUMP PUMPS & ACCESSORIESModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)SSSEE980 59917-WYN1 21419-5 10.00 10.00 17.37 1.01 22WSS30V 17961-WYN1 21357-0 14.00 9.00 13.75 1.00 24WSS20V 21473-7 22.50 17.00 11.50 2.55 27ESP45 58343-WYN1 21281-8 22.50 16.00 13.50 2.81 44ESP25 57680-WYN1 20752-4 9.30 16.30 10.80 0.95 13ESP15 57609-WYN1 10739-8 16.30 9.30 10.80 0.95 9

WSA120 66903-WYN1 21404-1 7.00 4.00 9.25 0.15 1EWP10 58332-WYN1 21131-6 5.00 5.50 12.00 0.19 4

CDU980E 57655-WYN2 21474-4 10.00 10.00 14.00 0.81 20EE980 57655-WYNE 21408-9 10.00 10.00 13.75 0.80 19.5

CDU800 56270-WYN3 10009-2 10.00 10.00 14.00 0.81 18.5CDU790 56137-WYN3 10001-6 10.00 10.00 14.00 0.81 16EE800 56270-WYNE 21428-7 10.00 10.00 14.00 0.81 19EE790 56137-WYNE 21427-0 10.00 10.00 14.00 0.81 18CDT50 57603-WYN1 20489-9 10.00 10.00 14.00 0.81 19CDT33 57602-WYN1 20488-2 10.00 10.00 14.00 0.81 16

SSPF50 57627-WYN1 20430-1 10.00 10.00 14.00 0.81 16SSPT50 57625-WYN1 20422-6 10.00 10.00 14.00 0.81 16SPF50 57611-WYN1 20365-6 10.00 10.00 14.00 0.81 15SPF33 57610-WYN1 20364-9 10.00 10.00 14.00 0.81 12SPT50 57601-WYN1 20363-2 10.00 10.00 14.00 0.81 15SPT33 57600 -WYN1 20362-5 10.00 10.00 14.00 0.81 12WSF50 57643-WYN1 20465-3 9.30 8.80 11.00 0.52 10WST50 57725-WYN1 21012-8 9.30 8.80 11.00 0.47 9WST40 57640-WYN1 20461-5 9.30 8.80 11.00 0.52 9WST30 57639-WYN1 20460-8 9.30 8.80 11.00 0.52 9RSP130 58325-WYN1 20732-6 9.50 9.00 12.00 0.59 9SPV800 56285 10042-9 8.30 8.30 35.80 1.43 27SPV500 56128 10032-0 8.30 8.30 35.80 1.43 23PTU50 57658-WYN1 20623-7 8.30 8.30 35.80 1.43 19PTU30 57522-WYN1 20815-6 9.00 8.00 36.00 1.50 1456171 56171 10400-7 16.00 20.00 6.00 1.11 3

66000-WYN1 66000-WYN1 20353-3 16.00 20.00 6.00 1.11 357027-001 57027-001 10744-2 2.80 2.80 5.00 0.02 4 oz.57028-001 57028-001 10395-6 3.00 3.00 7.80 0.04 11 oz.

66005-WYN1 66005-WYN1 20370-0 2.80 2.80 7.00 0.03 6 oz.56395 56395 10390-1 0.10 5.00 9.00 0.03 2 oz.56396 56396 10391-8 0.10 5.00 9.00 0.03 3 oz.

66002-WYN1 66002-WYN1 20367-0 0.10 5.50 7.00 0.00 8 oz.60031-WYN1 60031-WYN1 20418-9 0.10 9.00 7.00 0.00 3 oz.

56392 56392 10387-1 0.10 5.00 9.00 0.00 2 oz.AU5ES 66061-WYN1 20621-3 3.50 3.00 7.00 0.04 1

56835-WYN1 56385-WYN1 10472-4 7.50 3.00 7.50 0.10 166032-WYN1 66032-WYN1 20309-0 11.00 9.00 7.00 0.40 5.5 oz.


INDEXutility sewage | well

UTILITY PUMPS & ACCESSORIESModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)

GPH550 57811-WYN1 20586-5 20.00 16.25 17.50 3.29 60GPH400 57809-WYN1 20585-8 19.00 15.75 15.75 2.73 52GPS400 57825-WYN1 21220-7 19.00 18.00 14.25 2.82 64

EEAUP250 57729-WYN1 21423-2 7.56 7.56 12.69 0.41 10

RUP160 57719-REL1 20735-7 7.25 5.75 11.50 0.27 8VIP50 57711-WYN1 20598-8 6.80 6.80 11.00 0.29 10VIP25 57701-WYN1 20400-4 6.80 6.80 11.00 0.29 9.5VIP15 57700-WYN1 20399-1 6.80 6.80 11.00 0.29 9

TSC130 56517 10075-7 7.00 7.00 9.00 0.26 8TSC160 57712-WYN1 20610-7 9.80 9.80 11.00 0.61 8GFU110 57710-WYN2 20544-5 6.30 5.80 10.70 0.23 5

PC4 55832 10058-0 9.80 6.00 8.50 0.29 14PC4K 57727-WYN1 21133-0 8.50 12.00 9.50 0.56 19PC2 57717-WYN1 20620-6 9.00 9.00 7.60 0.36 7.25PC1 57716-WYN1 20619-0 9.00 9.00 7.60 0.36 6.3

WCP85 59907-WYN1 21110-1 5.50 10.50 5.50 0.18 5WDP21S 56678-WYN1 10399-4 0.10 5.00 9.00 0.07 6 oz.DPFTK1 62027-WYN1 20618-3 7.50 2.75 6.38 0.08 13 oz.AU2HK1 62005-WYN1 20579-7 27.00 26.30 7.00 2.88 25AU2HS1 16510-002 20480-6 27.00 26.30 7.00 2.88 17.75AU3HK1 62025-WYN1 20651-0 33.75 33.75 11.50 7.58 53AU2HD1 16511-WYN1 10794-7 9.50 11.80 4.30 0.28 7AU2PS1 66036-WYN1 20180-5 0.10 9.00 7.00 0.00 6 oz.56397 56397 10392-5 0.10 5.00 4.50 0.01 1 oz.56399 56399 10394-9 0.10 5.00 9.00 0.04 0.2656671 56671 10913-2 0.10 5.00 9.00 0.04 3 oz.

62015-WYN1 62015-WYN1 20589-6 6.00 5.50 1.20 0.02 1 oz.66058-WYN1 66058-WYN1 20655-8 5.00 1.00 4.50 0.01 1 oz.66059-WYN1 66059-WYN1 20656-5 5.50 - 6.50 0.02 1 oz.62002-WYN1 62002-WYN1 20433-2 1.69 2.9 2.39 6.78 0.05

SEWAGE PUMPS & ACCESSORIESModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)

SEP8 56240 10370-3 17.30 13.30 20.30 2.70 100SEP6 56238 10369-7 17.30 13.30 20.30 2.70 104SEP5 56237 10368-0 17.30 13.30 20.30 2.70 98SEP4 56236 10367-3 17.30 13.30 20.30 2.70 96

DSP75 58116-WYN1 10373-4 10.80 9.30 17.00 0.99 54DSP60 58115-WYN1 10371-0 10.80 9.30 17.00 0.99 54

CSE50TE 58112-WYN2 21475-1 12.00 10.00 15.00 1.04 54SEL50 57333-WYN4 20125-6 12.00 8.50 17.00 1.00 26SEL40 57330 20124-9 12.00 8.50 17.00 1.00 24RPP50 58117-WYN1 20755-5 7.00 9.75 16.00 0.62 26EFL33 57327 20123-2 12.00 8.50 17.00 1.00 24EFL30 58154-WYN1 20936-8 7.00 9.50 14.00 0.55 25

SYDSP60 56853 10924-8 23.00 23.00 37.00 11.33 80SYSSEL40 57336 20129-4 37.00 23.00 23.00 11.33 50SYSEL40 57383-001 20334-2 23.00 23.00 37.50 11.48 55

56286 56286 20189-8 22.00 22.00 31.00 8.68 2656287 56287 20280-2 22.00 22.00 31.00 8.68 26

28485-WYN1 28485-WYN1 21352-5 21.75 21.75 30.16 8.26 18.528486-WYN1 28486-WYN1 21353-2 20.41 20.41 0.39 9.40 2.55

28495-001 28495-001 21470-6 20.50 20.5 0.75 0.18 4.5056805-002 56805-002 20183-6 5.00 5.00 8.80 0.13 2.50

66037-WYN1 66037-WYN1 20182-9 0.10 13.50 7.00 0.01 166038-WYN1 66038-WYN1 10792-3 0.10 13.50 7.00 0.01 1

AU5RT 66051-WYN1 20631-2 7.50 3.50 7.50 0.11 2

WELL PUMPS & ACCESSORIESModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)

SWS100 56921 10615-5 22.30 11.50 10.30 1.53 42SWS75 56914 10613-1 22.30 11.50 10.30 1.53 39SWS50 56907 10611-7 22.30 11.50 10.30 1.53 39JSU50 58015-WYN1 20552-0 12.50 23.50 9.00 1.53 34

CWS100 56956 10597-4 22.30 11.50 10.30 1.53 40CWS75 56949 10595-0 22.30 11.50 10.30 1.53 40CWS50 56942 10579-0 22.30 11.50 10.30 1.53 38JCU50 58214-WYN1 20955-9 12.50 23.50 9.00 1.53 32

T100S10-2 57117-WYN3 20415-8 30.50 4.75 4.50 0.38 34T75S10-4 57116-WYN3 20410-3 24.50 4.75 4.50 0.30 27T75S10-2 57115-WYN3 20414-1 24.50 4.75 4.50 0.30 28T51S10-4 57411-WYN1 20611-4 24.50 4.75 4.50 0.30 27T50S10-4 57114-WYN3 20409-7 24.50 4.75 4.50 0.30 23T50S10-2 57113-WYN3 20413-4 24.50 4.75 4.50 0.30 24

SWS50-WX102 56909 10722-0 23.50 12.50 23.00 3.91 45SWS50-30PCA 56912 10665-0 21.50 16.30 38.50 7.81 68SWS50-8.5FX 59501-WYN1 20355-7 29.00 14.00 28.00 6.58 60JSU50-8.5FX 58010-WYN1 20354-0 29.00 14.00 38.00 8.69 59JSU50-WX102 58012-WYN1 10720-6 23.50 12.50 23.00 3.91 48JSU50-30PCA 58013-WYN1 10663-6 21.75 16.00 38.25 7.70 61

SWS50-12P 56910 10707-7 28.25 12.75 28.25 5.89 66SWS50-30P 56911-WYN1 10688-9 39.80 17.50 32.00 13.18 77JSU50-12P 58011-WYN1 10705-3 28.25 12.75 28.25 5.89 56JSU50-30P 58014-WYN1 10686-5 39.75 17.50 32.75 13.18 61


INDEXwell well | lawn | pool | specialty

All prices, products, designs and materials are subject to change without notice.

WELL PUMPS & ACCESSORIESModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)56316-WYN1 56316-WYN1 10404-5 10.00 4.50 4.00 0.10 556326-WYN1 56326-WYN1 10402-1 10.00 3.80 4.00 0.09 555462-WYN1 55462-WYN1 10405-2 18.50 5.40 5.00 0.28 1256319-WYN1 56319-WYN1 10406-9 18.50 5.50 5.00 0.29 1256322-WYN1 56322-WYN1 10407-6 18.50 5.50 5.00 0.29 1255465-WYN1 55465-WYN1 10411-3 18.50 5.50 5.00 0.28 756317-WYN1 56317-WYN1 10413-7 18.50 5.50 5.00 0.28 756324-WYN1 56324-WYN1 10412-0 18.50 5.40 5.00 0.31 615522-WYN1 15522-WYN1 10804-3 1.30 1.30 3.80 0.00 115537-WYN1 15537-WYN1 20004-4 2.50 2.50 4.50 0.02 115591-WYN1 15591-WYN1 10805-0 3.90 2.00 2.00 0.01 115739-WYN1 15739-WYN1 20005-1 2.80 2.60 4.20 0.02 215767-WYN1 15767-WYN1 10806-7 7.20 7.20 8.10 0.25 4

15791 15791 20243-7 3.80 2.00 2.00 0.01 1.3015792-WYN1 15792-WYN1 20244-4 2.50 2.50 4.50 0.02 215266-WYN1 15266-WYN1 10800-5 2.00 2.00 5.30 0.01 115267-WYN1 15267-WYN1 10801-2 2.10 2.00 5.10 0.01 115453-WYN1 15453-WYN1 10802-9 2.50 2.50 6.50 0.02 115454-WYN1 15454-WYN1 10803-6 3.50 3.80 7.80 0.06 315596-WYN1 15596-WYN1 10799-2 1.50 1.50 4.00 0.01 12 oz.15991-WYN1 15991-WYN1 10926-2 5.00 4.00 1.00 0.01 5 oz.66015-WYN1 66015-WYN1 10427-4 0.10 4.00 5.00 0.01 4 oz.66016-WYN1 66016-WYN1 10431-1 0.10 4.00 5.00 0.01 5 oz.66017-WYN1 66017-WYN1 10795-4 0.10 4.00 5.00 0.01 3 oz.66034-WYN1 66034-WYN1 10574-5 0.10 9.00 7.00 0.00 4 oz.66035-WYN1 66035-WYN1 10575-2 0.10 9.00 7.00 0.00 6 oz.66041-WYN1 66041-WYN1 10573-8 0.10 4.00 5.00 0.00 3 oz.66042-WYN1 66042-WYN1 10576-9 0.10 13.50 7.00 0.01 7 oz.

15679 15679 20014-3 2.50 2.50 3.80 0.01 166029-WYN1 66029-WYN1 20010-5 0.10 7.00 6.00 0.00 1

15785 15785 20248-2 2.50 2.50 3.80 0.01 3 oz.15786 15786 20249-9 2.50 2.50 3.80 0.01 0.1655653 55653 10783-1 0.80 6.50 6.50 0.02 6 oz.55656 55656 20251-2 8.00 8.30 6.00 0.23 1

17064-001 17064-001 10798-5 3.80 4.00 4.00 0.03 166021-WYN1 66021-WYN1 10797-8 0.10 7.00 6.00 0.00 166022-WYN1 66022-WYN1 10426-7 0.10 7.00 6.00 0.00 1

16965-002 16965-002 20171-3 9.00 5.50 3.00 0.09 316966-002 16966-002 20177-5 9.00 5.50 3.00 0.09 3.2516967-002 16967-002 20178-2 9.00 5.50 3.00 0.09 3.50

66025-WYN1 66025-WYN1 10389-5 0.10 13.50 7.00 0.01 11 oz.66033-WYN1 66033-WYN1 10434-2 0.10 9.00 7.00 0.00 11 oz.64031-WYN1 64031-WYN1 21063-0 9.00 7.00 3.50 0.13 0.70

23285-001 23285-001 20342-7 4.5 4.5 1.85 0.02 0.2523285-002 23285-002 20343.4 4.5 4.5 1.85 0.02 0.25

15902-WYN1 15902-WYN1 20012-9 1.80 4.00 10.00 0.04 115956-WYN1 15956-WYN1 20111-9 2.50 2.50 12.00 0.05 1

56874-002 56874-002 10158-7 6.00 6.00 6.00 0.13 5 oz.17071-001 17071-001 20266-6 0.10 6.00 15.00 0.01 3 oz.

56393 56393 10388-8 0.10 5.00 4.50 0.00 2 oz.

LAWN PUMPSModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)

PLS100 58418-WYN1 20713-5 18.00 9.50 11.75 1.16 23WLS200 58409-WYN1 20485-1 20.00 10.00 10.00 1.16 60WLS150 58408-WYN1 20484-4 20.00 10.00 10.00 1.16 60WLS100 58407-WYN1 20483-7 20.00 10.00 10.00 1.16 60WLS75 58406-WYN1 20482-0 20.00 10.00 10.00 1.16 60

POOL PUMPSModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)

WIP150 58411-WYN1 20531-5 25.50 8.70 15.00 1.93 44WIP100 58410-WYN1 20530-8 25.50 8.70 15.00 1.93 31

SPECIALTY PUMPSModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)

SWS50BOOST 01270-WYN1 21216-0 13.75 28.75 27.75 6.35 60SYLT30 57399-WYN4 20835-4 17.30 11.30 16.50 1.87 32

WELL PUMPS & ACCESSORIESModel No. Finished Good UPC 0-40066 Length (in) Width (in) Height (in) Cube Feet Ship Wt. (lbs)17067-001 17067-001 20257-4 3.00 2.80 4.50 0.02 3 oz.

17066-WYN1 17066-WYN1 20164-5 7.00 5.50 0.50 0.01 0.1215998 15998 20174-4 0.50 0.50 0.10 0.00 3 oz.

59402-001 59402-001 20207-9 16.50 16.50 23.00 3.62 2859403-001 59403-001 10439-7 16.50 16.50 30.00 4.73 3559404-001 59404-001 20002-0 17.00 17.00 44.50 7.44 5059405-001 59405-001 20209-3 21.50 21.50 49.00 13.11 8259406-001 59406-001 20210-9 26.75 26.75 50.25 20.81 12159400-001 59400-001 20199-3 13.00 9.00 9.25 0.63 559401-001 59401-001 10437-3 16.50 10.50 10.50 1.05 8

59502-WYN1 59502-WYN1 20435-6 13.00 22.00 15.00 2.48 1823224-002 23224-002 20212-3 23.20 16.00 18.30 3.95 31

3012 3012 20201-7 15.80 12.80 39.50 4.62 223022 3022 10438-0 19.80 16.80 39.50 7.60 38

Wayne Water Systems Catalog 2011

Documents

fort wayne

wayne home equipment

manufacturing water

lawn pumps

utility pumps

pool pumps

specialty pumps

water pump industry