Water Quality Testing Ms. DC and Ms. Arya. What should we test our water for??

Water Quality TestingWater Quality Testing

Ms. DC and Ms. AryaMs. DC and Ms. Arya

What should we test our water for??

What is Turbidity?

Measurement of how clear the water is Unclear water is said to be “turbid.” Turbidity is caused by matter such as clay, silt, and

other material in the water Could be the result of soil erosion, run-off, and

algal blooms

Test Your Water Turbidity

1. Pour 25 mL of water into the turbidity beaker.

2. Use the Secchi disk to measure turbidity

What are Phosphates?

Phosphates come from phosphorus, a plant nutrient

Frequently found in run-off from construction

Used as a fertilizer for landscaping

Phosphates

Can cause algal blooms which remove oxygen from the water

Over HALF of all phosphates in water come from household detergents

Testing Your Water for Phosphates

1. Using the 25 mL from turbidity testing, pour 5 mL into a test tube.

2. Add one Phosphorus TesTab.

3. Cap the tube and mix until tablet dissolves.

Wait for 5 minutes.

What are nitrates?

Nitrates come from nitrogen, a nutrient that helps plants grow

High levels of nitrates cause aquatic plant and algal blooms which remove oxygen from water

Unpolluted waters usually contain about 4 parts per million of nitrates

Above 40 parts per million is unsafe for drinking

Nitrates

Nitrates get into our watershed by Human and Animal wastes Decomposing organic matter

(matter that was once living breaking down) Lawn and crop fertilizer run-off

Test Your Water for Nitrates

1. Using the water from the turbidity experiment, pour 5 mL of water into a clean test tube

2. Add one Nitrate #1 TesTab. Cap the tube and mix until tablet dissolves

3. Add one Nitrate #2 CTA TesTab. Cap tube and mix.

4. Wait 5 minutes.

What is Dissolved Oxygen?

Just like animals on land, aquatic animals need oxygen to live

Oxygen is dissolved in the water Algal blooms use up all the oxygen leaving

little for the animals in the water

Testing Your Water for Dissolved Oxygen

1. Pour 5 mL of water into the test tube.

2. Put one TesTab into the tube and dissolve the tablet.

3. Compare the color the water turns to the chart.

What is pH? One of the most

common water tests Results tell you how

basic or acidic the water is

A pH range of 6.5 to 8.2 is healthy for most organisms

Blue Crabs need a pH of 8.0

Rapidly growing algae can increase the pH of water

Measure Your Water’s pH

1. Pour 10 mL from the turbidity experiment into a test tube

2. Add one pH Wide Range TesTab

3. Cap the tube and mix until the tablet is dissolves.

4. Compare to color chart.

Coliform Testing

Coliform is a group of bacteria that is commonly found in animal feces

High coliform amounts can result in disease in aquatic animals as well as people swimming in that water

Testing Your Water for Coliform

Write your name on your nutrient agar plate Dip a sterile swab into your water Streak your nutrient agar plate Put your plate in the middle of the table Ms. DC will put your plate in an incubator

(37°C) overnight. You will look at your plates tomorrow.