InSinkErator is a business unit of Emerson Electric Co. The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator® may make improvements and/or changes in the specification at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. 4700 21st STREET RACINE, WI 53406 TEL: 800-845-8345 FAX: 262 554-3620 insinkerator.emerson.com InSinkErator ©2018 PROJECT: ITEM NO.: WASTE REDUCTION SYSTEM Form No. F521-18K-95-85 PRODUCT FEATURES & SPECIFICATIONS REDUCES FOOD WASTE VOLUME & MASS • Grinds waste, extracts water and expels semi-dry, finely-ground particles that can be collected for compost 2 or traditional waste hauling • Pulping food waste reduces volume by up to 90% and mass by up to 75% 1 • Processes both liquid and solid food waste, even difficult-to- process foods like pineapples • Produces an optimal mix for composting when processing 100% organic material 2 • Can process food waste mixed with up to 50% disposables • Standalone design simplifies installation – no fabrication, just water and electrical • Patent-pending discharge bin and chute with integrated detection system is designed to keep food waste contained and off the floor • Multi-lingual digital user interface guides operators through each session • Squeegee and overhead sprayer facilitate swift scrap disposal and cleaning TECHNICAL SPECIFICATIONS • 10 HP Tri-Cycle™ exclusive grinder • NEMA 4X programmable logic controller (PLC) • Dewatering centrifuge rotation: 1,000 RPM • Auger screen size: 1 /16" (1.58 mm) • Average system throughput: 50 lbs. (23 kg) of waste per minute 1 • Fresh water usage: 3 gpm • Digital user interface, emergency stop and illuminated operating panel buttons • Corrosion-resistant stainless steel processing table with backsplash, removable front and side panels, and leveling casters • 6- 5 /8” (168.3 mm) grinder opening and removable baffle SIMPLIFIED CLEANING • Shrouded processing table with built-in features and prompts helps to minimize cleaning time and maintain a proper cleaning cadence • Operators need as little as 3½ minutes to squeegee and wipe down the processing table, discharge bin and chute and perform an internal deep cleaning cycle 3 • After each processing session, the dewatering unit performs an automatic internal quick cleaning cycle while the unit powers down (10-second cycle) • Operators are prompted to run the deep cleaning cycle every 24 hours (95-second cycle) Divert food waste from landfills and reduce hauling costs with the next-generation InSinkErator pulper. Tri-Cycle™ reduces food waste volume by up to 90% and mass by up to 75% 1 using a 10 HP, uniquely designed grinder and powerful dewatering centrifuge. The compact, standalone design processes 50 lbs. (23 kg) of food waste per minute 1 and can placed nearly anywhere, in or out of the kitchen. Ideal for operators participating in compost programs 2 and customers with limited pre-hauling storage. ON-SITE PARTS & LABOR WARRANTY YEAR Our products appear on The KCL CADalog CD-ROM based CAD Foodservice Symbol Library. More information is available from Kochman Consultants, Ltd. at www.kclcad.com. ELECTRICAL SPECIFICATIONS 208-240V, 60 Hz, 3 Ph, 11.5/15.0 amps, CUL 460V, 60 Hz, 3 Ph, 7.5 amps, CUL 1 Based on internal testing. Actual results may vary based on material mix. 2 Check local regulations for acceptable composting materials. 3 Cleaning cycle time was achieved by rinsing table, chute and discharge bin. The Tri-Cycle unit has a cleaning button that runs a 95 second cleaning cycle which was used as part of the cleaning cycle time.