Top Banner
WASHINGTON MONUMENT CASE HISTORY Jean-Louis BRIAUD Texas A&M University
39

WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

Apr 26, 2018

Download

Documents

truongngoc
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

WASHINGTON MONUMENT

CASE HISTORY

Jean-Louis BRIAUD

Texas A&M University

Page 2: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

2

OUTLINE

• History

• Construction

• Dimensions

• Loading

• Soil Stratigraphy

• Soil Properties

• Bearing Capacity

• Settlement Monitoring

• Consolidation Calculations

• Conclusions

Page 3: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

3

HISTORY

• Built to honor George Washington, the 1st

President of USA

• Due to historic events and excessive

settlement, the Monument was constructed in

three phases:

• 1848: 1st phase = construction begins

• 1858: construction stops = no more money

• 1879: 2nd phase = underpinning

• 1880: 3rd phase = completion of the shaft

• 1884: construction completed

• Settlement measurements have been taken

since the 2nd phase in 1879, providing a

valuable long-term recordRobert Mills

Page 4: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

4

1792 map and 2007 map of

Federal City - Washington DC

Page 5: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

5

GEOLOGY

• Recent alluviums deposited by Potomac River (tidal fluctuations

and floods)

• Pleistocene terrace deposits

• At that time, sea level varies greatly with abrupt climate changes,

resulting in the presence of highly variable medium-plastic and

slightly-to-moderately organic clay, sand, gravel, and sometimes

boulders.

• Cretaceous soils missing

• Crystalline bedrock = decomposed Wissahickon Schist.

metamorphic rock dating from the Ediacaran to the Cambrian

age.

Page 6: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

6

CONSTRUCTION

• Began in 1848 under the

supervision of Robert Mills, the

architect of the Monument

• Original foundation consisted of a

stair stepped pyramid made of

blue gneiss blocks

• Shaft made of marble blocks

• Construction was halted in 1858

with the shaft uncompleted at a

height of 55.5 m due to lack of

funds

Page 7: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

7

• Construction did not resume until

1879, after the Civil War when Lt. Col.

Casey of the US Army Corps of

Engineers took control

• The original foundation was

considered inadequate so Casey

decided to underpin the foundation

and install buttresses

• Increased foundation area

• Founded on stiffer soil

• The Monument was completed in 1884

CONSTRUCTION

Page 8: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

8

DIMENSIONS

Page 9: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

9

LOAD vs TIME

First Phase of Construction

Underpinning

Final Phase of Construction

0

100

200

300

400

500

600

700

1845 1850 1855 1860 1865 1870 1875 1880 1885 1890

Time (years)

Lo

ad

(M

N)

0

100

200

300

400

500

600

700

1997 2007

Page 10: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

10

PRESSURE vs TIME

First Phase of Construction

Un

derp

inn

ing

Fin

al

Ph

ase o

f

Co

nstr

ucti

on

0

100

200

300

400

500

600

1845 1850 1855 1860 1865 1870 1875 1880 1885 1890

Time (years)

Pressu

re (

kP

a)

Completely Distributed Total Pressure

Underpinning-Only Total Pressure

0

100

200

300

400

500

600

1997 2007

Page 11: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

11

WEIGHT

• Weight of original foundation: 70 MN (Pressure =

118 kPa)

• Weight at the end of Phase 1: 305 MN (Pressure =

513 kPa)

• Weight of new foundation: 153.8 MN

• Final weight of Washington Monument: 607.7 MN

(Pressure = 465 kPa)

• San Jacinto Monument: 313 MN

• Tower of Pisa: 142 MN

• Eiffel Tower: 94 MN

• Earth terrace: 86.4 kPa

Page 12: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

12

51 SOIL BORINGS

DEEPEST 38 m

Page 13: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

13

SOIL STRATIGRAPHY

Page 14: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

14

WATER TABLE

Page 15: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

15

SOIL PROPERTIES

Page 16: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

16

SOIL PROPERTIES

Page 17: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

17

SOIL PROPERTIES

Page 18: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

18

SOIL PROPERTIES

Page 19: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

19

BEARING CAPACITY

Page 20: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

20

BEARING CAPACITY

• Actual Pressure under old foundation = 513 kPa

• Ultimate pressure Pu under old foundation (Clay)

• Su = 72 kPa (from N=12 bpf, Kulhawy and Mayne, 1990), D = 2.34

m (at time of maximum loading), Nc = 6.2 (square foundation)

• Then Pu = 491 kPa

• Ultimate pressure Pu under old foundation (Sand) (Briaud and Gibbens, 1999):

• Blow count (N) = 12 bpf, Then Pu = 900 kPa

• FS = 0.96 – 1.75

P N S Du c u

75u

blowsP kPa N

ft

Page 21: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

21

BEARING CAPACITY

Page 22: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

22

• Actual pressure at end of construction = 465 kPa

• Ultimate pressure Pu under new foundation:

• Af = area of the foundation

• pinside = inside perimeter of foundation

• poutside = outside perimeter of foundation

• H = thickness of sand layer

• k0 = coefficient of earth pressure at rest in sand layer

• σ’ov = vertical effective stress at middle of sand layer

• Φ = effective stress friction angle of the sand layer

• Then Pu under the new foundation = 987 kPa

• Factor of safety = 2.4.

' tanu f u f inside outside o ovP A P clay A p p H k

BEARING CAPACITY

Page 23: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

23

DEPTH OF INFLUENCE

In this case the depth of influence is set

by the presence of the shallow bedrock

at about 20 m depth

Page 24: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

24

DEPTH OF INFLUENCE

The depth of influence is defined as

the depth where:

• the stress has decreased to 10% of

the applied stress

• the settlement has decreased to10%

of the foundation settlement

Page 25: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

25

Zi/B vs E1/E0

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

0.001 0.01 0.1 1 10 100 1000

E1/E0

Zi/B

E=0.1Z+400

E=Z+350

E=3.13Z+250

E=12.5Z+150

E=25Z+100

E=37.5Z+50

E=75Z+10

E=150Z+3

E(z) = E0 + E1(Z/B)

Depth

to 10%

settlement

Page 26: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

26

STRESS INCREASE WITH

DEPTH BY 3D FEM (ABAQUS)Old foundation

(After Phase 1)

Underpinned foundation

(Before & after Phase 3)

Page 27: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

27

CONSOLIDATION

CALCULATIONS

• Calculated settlement for:

• Phase 1 (From 1948 to 1958)

• Phase 2 (Underpinning of Monument)

• Phase 3 (Completion of Monument)

• Three methods:

• Curve method (Method a)

• Equation method With Cr measured on initial

loading curve (Method b)

• Equation method With Cr measured on

unload/reload curve (Method c)

Page 28: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

28

CONSOLIDATION CURVE

Page 29: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

29

CONSOLIDATION CURVE

Page 30: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

30

CONSOLIDATION

SETTLEMENTS

PREDICTED VS MEASURED

Page 31: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

31

RECONSTITUTED

SETTLEMENT

Time in Years

Page 32: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

32

SETTLEMENT MONITORING

• Settlement was not measured during Phase 1

• Casey placed reference points at each corner

of the top of the original foundation

• The benchmark used is the Meridian Stone

which is marked by a bolt in the center of a

square granite post set flush with the ground

• Settlement first measured in February 1879

• During underpinning, settlement readings for

each corner were taken and recorded once

daily, and since that time.

Page 33: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

33

BENCHMARK IS THE

MERIDIAN STONE AT THE

WHITE HOUSE

Page 34: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

34

MEASURED SETTLEMENT

• Settlement after underpinning = 52 mm

• Settlement after completion = 115 mm

• Settlement after last reading (1992) = 170 mm

Settlement during underpinning

Settlement during completion of construction

Settlement under constant load

0

20

40

60

80

100

120

140

160

180

1870 1880 1890 1900 1910 1920 1930 1940 1950 1960 1970 1980 1990 2000Year

Se

ttle

me

nt

(mm

)

Page 35: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

35

Measured vs. Calculated Settlement

2

v

dr

t cT

H

• Drainage length (Hdr) = 10.2 m (one-way)

• Cv = 10.2 m2/yr (average), Cv = 3.39 m2/yr (minimum)

Page 36: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

36CONCLUSIONS

• After Phase 1, the pressure was close to the

ultimate pressure and the settlement was 1.3 m

• Underpinning saved the monument by reducing

the net pressure on the soil and increasing the

ultimate bearing capacity (FS = 2.4)

• The calculated settlement for Phase 2 and 3

matched well the measured settlement (?!)

• Creep settlement has been consistent at less

than 1mm/year for 120 years.

• The role played by subsidence continues to be

studied.

Page 37: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

37

CONCLUSIONS

• Depth of influence to 10% settlement depends on

modulus profile (1B for linear increase and 4B for

constant with depth)

• Read the consolidation curve directly for

settlement calculation

• Plot the consolidation curve as a stress strain

curve.

• Beware of the unload-reload loop as the slope

depends on the stress release amplitude

Page 38: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •

38

ACKNOWLEDGEMENTS

• Mueser Rutledge Consulting Engineers (MRCE)

for sharing their knowledge and data on the

Washington Monument (Hugh Lacy, Doug

Christie)

• Phil King (Synchropile)

• Jay Padgett Jr. of GeoServices Corporation for

his insight and background on the Monument

• Brad Smith and Jennifer Nicks of Texas A&M

University

• Funding provided by the Spencer J. Buchanan

Chair at Texas A&M University

Page 39: WASHINGTON MONUMENT CASE HISTORY - Texas … Monument...20 BEARING CAPACITY •Actual Pressure under old foundation = 513 kPa •Ultimate pressure P u under old foundation (Clay) •