WARRIOR PTE LTD Blk 17 Marsiling Industrial Estate Road 1 # 01-11 Singapore 739279 Tel: (65) 6364 5100 Fax: (65) 6364 0629 [email protected]www.warrior.com.sg WARRIOR S2000 SILICATE PAINT NATURAL MINERAL COATING FOR WALLS USES Façade protecon of concrete, lime or cement mortar, brick and plaster. FEATURES 1. Dull Flat Ma Finish. 2. Highly durable mineral-based silicate coang. 3. Non Polymer product, stac free, no dirt pickup. 4. Excellent adhesion to a variety of substrates 5. Water Repelling, with excellent water vapour permeability. 6. No unsightly peeling and flaking of paint. 7. Does not promote fungal growth. 8. Excellent weather and UV resistance. 9. Does not burn and emit noxious fumes when exposed to fire. 10. Safe for indoor applicaon due to the absence of organic solvents and odours. 11. Long-term protecon, 10 to 20 years. APPLICATION METHODS SURFACE PREPARATION Surfaces must be dry and free from grease, oil, loose parcles, dust or other contaminants. On exterior surfaces, the grout must be removed by mechanical grinding then rinse thoroughly with wa- ter. Surfaces must have a certain roughness and porosity to allow good penetraon and adhesion of the coang. New cement mortar renders require a waing period of 3-4 weeks before painng. Surfaces painted with Lime should be removed with a brush and apply a coat of S2000 P PRIMER diluted with 50% of water. For gypsum plaster surfaces, apply one coat of PP10 PAINT PRIMER before applying S2000. Suitable for preservaon of herit- age buildings similar to the picture above.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
USES Façade protection of concrete, lime or cement mortar, brick and plaster.
FEATURES 1. Dull Flat Matt Finish. 2. Highly durable mineral-based silicate coating. 3. Non Polymer product, static free, no dirt pickup. 4. Excellent adhesion to a variety of substrates 5. Water Repelling, with excellent water vapour permeability. 6. No unsightly peeling and flaking of paint. 7. Does not promote fungal growth. 8. Excellent weather and UV resistance. 9. Does not burn and emit noxious fumes when exposed to fire. 10. Safe for indoor application due to the absence of organic solvents and odours. 11. Long-term protection, 10 to 20 years.
APPLICATION METHODS SURFACE PREPARATION Surfaces must be dry and free from grease, oil, loose particles, dust or other contaminants. On exterior surfaces, the grout must be removed by mechanical grinding then rinse thoroughly with wa-
ter. Surfaces must have a certain roughness and porosity to allow good penetration and adhesion of the
coating. New cement mortar renders require a waiting period of 3-4 weeks before painting. Surfaces painted with Lime should be removed with a brush and apply a coat of S2000 P PRIMER diluted with 50% of water. For gypsum plaster surfaces, apply one coat of PP10 PAINT PRIMER before applying S2000.
Suitable for preservation of herit-age buildings similar to the picture above.
On painted surfaces with plastic or acrylic paints, the application must be made once all the badly
adhered paint has been removed. It is recommended to apply a coat of S2000 P PRIMER diluted with 50% of water on surfaces of lime
or cement mortar, concrete, cement renders, bricks, etc., as this way the absorption will be regular-ized and surfaces will be
reinforced.
REMARKS To avoid staining of the surrounding area, use protective sheeting. Special care should be taken with glass, ceramic, natural stone, lacquer and metal surfaces. Any splashing should be rinsed with water immediately. Although the application can be done with slightly damp surfaces, take care to avoid any
excessive moisture in them. The full curing of the applied coating occurs after 20 days the product is applied.
TECHNICAL DATA
PRECAUTION The paint is alkaline in nature, wear protective gear to protect the eye and skin. In case of contact, rinse with water immediately.
PACKING 20 kg - pail
Nature Inorganic silicate
Diluent Water
Application Brush, roller
Application Temperatures +10 to +35 ºC
Surface drying time (EN ISO 1517) < 1 hour
Coverage 5 m2/kg at 60 micron of dry film thickness
Water vapor permeability (EN ISO 7783-1/-2) (Equivalent air barrier)
SD < 5 meters Class I (EN 1504-2)
Permeable to water vapor
Water permeability (EN 1062-3) < 0,1 kg/ m2.h0,5
Impermeable to water (EN 1504-2)
Adhesion to concrete support (EN 1542) 3,5 MPa( A:B/C:50%:50%
Hazardous substances (EN 1504-2) Complies with paragraph 5.3
of EN 1504-2 Standard
Colors White, Dull Flat Finish. Color can be added.