Transaxle Technology provides added support and stability to the gear shaft. This equalizes roller pressure, extending the life of the motor gearbox and squeeze tube. innovation > technology > future Warewash systems
Transaxle Technology providesadded support and stability to the gearshaft.
This equalizes roller pressure,extending the life of the motor gearboxand squeeze tube.
innovation > technology > future
Warewashsystems
Preciseprogrammingof speed, time andconductivity value by lastgeneration trimmersand microprocessortechnology
Long lifetimeof squeeze tube and motordue to latest transaxle andtubing technology
2 cleaning & hygiene division > warewash systems
NEMA 4 (IP 65) enclosureMade of PP reinforced with glass fiber so that
it is extremely water and dust proof.
seko’s construction technology continues to
provide products with high resistance to
impacts and chemicals.
Electrical class 2Making a ground cable connection
unnecessary.
Wide range of optionsAll pumps can be supplied with the possibility
of connecting a level probe, acustic alarm and
priming by means of a switch
Microprocessor technologyThe entire line uses microprocessortechnology for precise and reliable controlover time
Transaxle TechnologyProvides support and stability to the driveshaft,making the roller pressure on the squeeze tubesmore uniform. This results in a longer lifetime ofthe motor and the squeeze tubes
sekoflex and sekobril squeeze tubesNew construction technology• sekoflex and sekobril squeeze tubes are made to
ensure a constant ratio between the internal and externaldiameter along the entire length of the squeeze tube
• The squeeze tubes are made using the latest technologiesthat allow the correct fiber positioning. This ensure thatthe squeeze tubes are very reliable, mechanically andchemically resistants
Innovative materials• Guarantee high compatibility with chemical products
• Keep the pump’s flow rate constant even after manycycles of operation
warebasicthe reliable, low-cost solution
Rinse Aid or Sanitizer Pump
innovation > technology > future 3
Detergent Pumps
Fixed speed peristaltic pump with analogic adjustment of dosing timeModels powered via single or double solenoid valves available. Two setting trimmers enable detergentInitial Charge and Make Up Charge.
Power supply from 100 to 240 Vac 50-60 HzPower consumption 3.5 WInitial Charge time: 18 to 180 s • Make Up Charge time: 2 to 15 s
PRT 6 (sekoflex squeeze tube) 1.5 3.50
PRT 6
Model psi oz/min
Peristaltic pump with analogic speed adjustment
Power supply automatic switching from 20 to 240 Vac 50-60 HzPower consumption 3.5 W
PR 7 (sekoflex squeeze tube) 1.5 4.10 max
PR 7
Model psi oz/min
Fixed speed peristaltic pump with analogic dosing adjustment by conductivity probe
Power supply from 100 to 240 Vac 50-60 HzPower consumption 3.5 W
PA 9 (sekoflex squeeze tube) 1.5 5.30
PA 9
Model psi oz/min
Fixed speed peristaltic pump with analogic dosing adjustment by conductivity probe
Power supply from 100 to 240 Vac 50-60 HzPower consumption 7 W
PA D
Peristaltic pump with analogic speed adjustment
Power supply from 20 to 240 Vac 50-60 HzPower consumption 3.5 W
PRS 1 (sekobril squeeze tube) 45 0.6 max
PRS 1
Model psi oz/min
Complete Rangeof ModelsLL Version: 1 detergent pump and 1rinse-aid pump
DL Version: 1solenoid valve forthe powderdetergent dispenserand 1 rinse-aidpump
LLL version: 1 detergent pump, 1 rinse-aid pump and 1 sanitizer pump
DLL Version: 1 solenoid valve for thepowder detergent dispenser, 1 rinse-aidpump and 1 sanitizer pump
All models available with integratedpressure switch
VersatileDosing ControlDetergent:Probe and Probeless Modes
Rinse Pump:Speed Control
Sanitizer Pump:Speed Control
Controls:Microswitches andtrimmers for settingchemicalconcentration anddosing modes
Fast, EasyInstallation andMaintenance■ Installing the wareplus is fast, easy
and intuitive
■ The wareplusautomaticallyaccepts detergent/ rinse signalsfrom 100 to240 Vac. No otherpower source required
■ Compression fittings supplied for allplumbing and tubing connections
■ Mounts easily to the wall using theprovided mounting
Other Features■ External membrane switches for priming
■ Water resistant plastic cabinetwith class 2 electrical insulation
■ Audible empty product alarm
■ Optional low level alarm systemavailable for liquid rinse and sanitizer
■ Durablesekoflex andsekobrilsqueeze tubeswith fast, safeand secureconnectionfittings
■ Delime Mode
■ Fault Diagnosis Function
This is a versatile, safe, microprocessorwarewash dispensing system.
Combines SEKO's experience withwarewashing systems and moderntechnology.
Easy installation anduser-friendlyprogramming.
Available in variousmodels for dispensingliquids and/or powders.It is used suitable forall types ofdishwashingmachines (door andconveyor).
wareplussolutions for all demands
4 cleaning & hygiene division > warewash systems
Te
ch
nic
al
Fea
ture
s
Sanitizer Pump
A warebasic sanitizer pump easilyinstalls onto existing two componentwareplus systems.
Dosing Speed control
Pump sekobril Squeeze tubingMaximum pressure 45 psiFlow rate 0.6 oz/min
Power supplyFrom the wareplus system only
Consumption 3.5 W
Weight 2 lbs
Dimensions W 3.23” x D 3.62” x H 4.05”
Detergent Dosage Conductivity or TimedRinse Aid Dosage SpeedSanitizer Dosage SpeedDetergent Pump sekoflex Squeeze tubingFlow rate 4.7 oz/minRinse Aid Pump sekobril Squeeze tubingMaximum pressure 45 psiFlow rate 0.7 oz/minSanitizer Pump sekobril Squeeze tubingMaximum pressure 45 psiFlow rate 0.7 oz/minConductivity measuring scale(using a conductivity probe) from 200 μS to 10 mSAlarms OFA double time 255 sec. (max) can be deactivated
(The first activates the alarm and the second stopsthe pumps)
Power Supply Automatic Switching from 100 to 240 Vac(24 Vac with additional module)
Consumption 14 WWeight 7.7 lbsDimensions (inches)LL and LLL Version W 11.2” x H 4.3” x D 8.7”DL and DLL Version W 14.2” x H 4.3” x D 8.7”
innovation > technology > future 5
WarePlus LLL
WarePlus LL
WarePlus DL
WarePlus DLL
SEKO’S TDS the industries leadingdrain chemical dispenser.
TDS’ are known for their reliabilityand durability in the field.
Water resistant
Easy installation
Easy electricalconnections
The TDS is usedfor grease trapmaintenance
The TDS meteringsystem with timedoperation andperistaltic pump,is controlled by aprogrammableanalog or digitalclock
The TDS willautomaticallymeter exactamounts ofchemical anytime ofthe day or night,without waste
6 cleaning & hygiene division > warewash systems
TDS Analog
MODEL TDS DD-B TDS DD-115 TDS DA-115
PART# BDD1HF1WTU00 BDD0HC1WTU00 BDA0HC1WTU00
OUTPUT 0.8 oz/min25 ml/min
0.8 oz/min25 ml/min
0.8 oz/min25 ml/min
INSTALLATIONKIT INCLUDED yes yes yes
VOLTAGE battery operated 12 VDC 115 VAC 115 VAC
DIGITAL OR ANALOG Digital Digital Analog
MINIMUMQty/Min
0.8 oz/min25 ml/min
0.8 oz/min25 ml/min
1.6 oz/2 min50 ml/2 min
MAXIMUMQty/24 HRS
9 Gallons36 Liters
9 Gallons36 Liters
9 Gallons36 Liters
NO. OF FEED TIMES/24HRS
MAXIMUM8 8 48
TIMERFEATURES
8 on-times/24 hrProgrammable
runtime.Minimum period
of 1 minute
8 on-times/24 hrProgrammable
runtime.Minimum period
of 1 minute
Potential of 48 cycles within24 Hr period. Minimum
periodof 2 minutes
INSTALLATIONKIT
APPLICATIONS
Installation Kit
TDS Digital
TDS[ Timed Dosing Systems ]Drain enzyme/Bacteria pump
Foot filter • Viton check valve • Pick up tube 6 ft • Delivery tube 6 ft
Greasetrap & Drain maintenance * Lift Station * Waste Processing * Water Treatment
innovation > technology > future 7
Warewash Systems Installation Kits
ConductivityProbe
WareBasic
PA D PA PR PRT PRS 1
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔
✔
✔
LL LLL DL DLL
Wall mountingbracket
Wall mountingbracket
PP injectionconnector Ø3/8”
Adapter Ø 7/8”(for PPinjectionconnector)
ProductPick-up tubing
Deliverytubing
Foot filter
Stainless Steelcheck valve(for Rinse AidPump)
PP check valve(for SanitizerPump)
WarePlus
BRO WWSUS 08.1Technical data can be change without warning. Pictures and technical drawings are indicative only
Our complete rangefor all your dosing and cleaning demands
LaundrySystems
OPL Advantage OPL Basic
OPL Mini L
ProportioningSystems
ProMix ProSpray
ProS
ink
ProD
ose
SEKO DOSINGSYSTEMS CORP.Tel.: (215) 945 0125
Fax: (215) 945 0937
Toll Free: (866) 651 4323
Web site: www.sekousa.com
Email: [email protected]
SEKO Asia Pacific SINGAPORE • SEKO China CHINA • SEKO do Brasil BRAZIL • SEKO Dosing Systems USA • SEKO Deutschland GERMANY • SEKO France FRANCESEKO Iberica SPAIN • SEKO Italia ITALY • OOO SEKO RUSSIA • SEKO Northern Europe DENMARK • SEKO SIETA ROMANIA • SEKO Southern Africa SOUTH AFRICASEKO UK UNITED KINGDOM