Dimensions in Inches (mm) www.hubbell-wiring.com Wall Plates Index Section K Wall Plates Index Product Page Number Wall Plate Types, Finishes and Configurations K-2 Features and Benefits K-3 Toggle Switches K-4 Duplex and Rectangular Receptacles K-5 Rectangular and Single Receptacles K-6 Single Receptacles K-7 Blanks, Strap Mount and Box Mount K-8 Toggle Switch and Duplex Combinations K-9 Rectangular Combinations K-10 Miscellaneous Combinations K-11 Miscellaneous Combinations and Switch Plates Stamped 347V K-12 Telephone and Coaxial K-13 Coaxial, Twinaxial, “D” and RS232 K-14 Data and Modular Jack K-15 Jumbo Plates K-16 Premarked Emergency K-17 Premarked Isolated Ground and Computer Only K-18 Wall Plate Selection Chart K-19 Security Wall Plates K-20 Weatherproof Plates – While In Use Protection K-21 Weatherproof Plates – Single Receptacles and Switches K-22 Weatherproof Liftcovers – 50A Twist-Lock ® and Hubbellock K-23 Weatherproof Liftcovers – Duplex and Rectangular Receptacles K-24 Weatherproof Liftcovers – Switch, Locking and Accessories K-25 Weatherproof Liftcovers – Flanged Inlets and Flanged Receptacles K-26 Technical Information K-27–28 Custom Metal Wall Plates K-29–34
34
Embed
Wall Plates - Womack Electric · Wall Plates Index Section K Wall Plates Index Product Page Number Wall Plate Types, Finishes and Configurations K-2 ... Office White HPS2OW PJ262OW
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Dimensions in Inches (mm) www.hubbell-wiring.com
Wall Plates
IndexSection KWall Plates
Index
Product Page NumberWall Plate Types, Finishes and Configurations K-2Features and Benefits K-3Toggle Switches K-4Duplex and Rectangular Receptacles K-5Rectangular and Single Receptacles K-6Single Receptacles K-7Blanks, Strap Mount and Box Mount K-8Toggle Switch and Duplex Combinations K-9Rectangular Combinations K-10Miscellaneous Combinations K-11Miscellaneous Combinations and Switch Plates Stamped 347V K-12Telephone and Coaxial K-13Coaxial, Twinaxial, “D” and RS232 K-14Data and Modular Jack K-15Jumbo Plates K-16Premarked Emergency K-17Premarked Isolated Ground and Computer Only K-18Wall Plate Selection Chart K-19Security Wall Plates K-20Weatherproof Plates – While In Use Protection K-21Weatherproof Plates – Single Receptacles and Switches K-22Weatherproof Liftcovers – 50A Twist-Lock® and Hubbellock K-23Weatherproof Liftcovers – Duplex and Rectangular Receptacles K-24Weatherproof Liftcovers – Switch, Locking and Accessories K-25Weatherproof Liftcovers – Flanged Inlets and Flanged Receptacles K-26Technical Information K-27–28Custom Metal Wall Plates K-29–34
Type
s, F
inis
hes
and
Con
figur
atio
nsW
all P
late
sWall PlatesTypes, Finishes and Configurations
Actual product may vary from photos shown above.
S8MEVPremarked Stainless Steel
IGP8Premarked Nylon
PJ8CPremarked Nylon
A1Aluminum
BP1Brass Plated Steel
CH8Chrome Plated Steel
B1Solid Brass
S1Stainless Steel
SPJ26Smooth Nylon
P1RSmooth Nylon
P1BSmooth Nylon
P1XSmooth Nylon
HPS1WASmooth Nylon
P1GSmooth Nylon
P8Smooth Nylon
K-2 Dimensions in Inches (mm)www.hubbell-wiring.com
Wall Plates
Features and BenefitsWall PlatesFeatures and Benefits
K-3Dimensions in Inches (mm) www.hubbell-wiring.com
Only The Best MaterialsHubbell offers a wide variety of configurationsavailable in high-impact nylon and metal wall plates.In 1981, Hubbell was the first manufacturer tointroduce nylon wall plates. Hubbell only offersplastic plates made of a high-impact material anddoes not offer wall plates made of materials thatmay be subject to breakage in abusiveenvironments.Hubbell offers only the best grade of stainless steeltype 302/304, which is 18% chromium, 8% nickel,and non-magnetic providing superior corrosionresistance versus type 430 stainless steel. When youspecify Hubbell wall plates you can be assured of thehighest quality materials providing extended life inthe most abusive environments.High-Impact Smooth NylonFor Commercial, Institutional, Hospital and IndustrialApplications.
High-impact resistance limits access to live partsdue to breakage.Contemporary smooth finish and contourededges enhance installation appearance.Captive screw feature holds mounting screw inplace for quick and easy installation.Positive “Bow” feature assures flush installation.Self-extinguishing nylon material.Smooth finish without recessed lines is easy toclean and maintain attractive appearance.Highly resistant to solvents and cleaning solutionsproviding long life in the harshest environments.Non-conductive material.
Smooth Metal 302/304 Super Stainless Steel18% Chromium, 8% NickelFor Commercial, Institutional, Hospital and IndustrialApplications.
Provides extended life in abusive and corrosiveenvironments.Contemporary smooth finish and contourededges enhance installation appearance.Smooth finish without recessed lines is easy to clean and maintain attractive appearance.Satin finish hides fingerprint marks.Non-magnetic for static-free requirements.
Smooth Solid Brass, Anodized Aluminum and Metallic Plated SteelFor Commercial, Institutional and Industrial Applications.Smooth Solid Brass
Provides a plush appearance and durability of metal.Finish is coated to inhibit oxidation.
Smooth Solid Anodized AluminumNon-magnetic and corrosion resistant providing suitability for a wide range of applications.Finish is coated to inhibit oxidation.
Metallic Plated SteelAvailable in a choice of chrome and brass
finishes.Custom Metal Wall PlatesHubbell offers 40 custom configurations available in 5 metal finishes from 2-gang up to and including8- gang configurations. These custom openings can be configured in any combination to meet yourspecific requirements.
Togg
le S
witc
h Pl
ates
Wal
l Pla
tes
Wall PlatesNylon and Metal Switch Plates
K-4 Dimensions in Inches (mm)www.hubbell-wiring.com
Toggle Switch PlatesStainless Steel (S/S)
Smooth High-Impact Nylon BrassConfiguration Color Standard Mid-Size Plated Steel, Smooth Anodized Aluminum
1-Gang, 1 Single Receptacle for1.36”-1.39” (34.5-35.3) dia. face. SJ7
.50” (12.7) I.D. nylon bushing provided.Specifications are subject to change without notice.
Oversize dimensions (refer to page K-28 for more details).1-Gang, 5.25” x 3.50” (133.4 x 88.9).2-Gang, 5.25” x 5.31” (133.4 x 134.9).3-Gang, 5.25” x 7.12” (133.4 x 180.8).
1.40" (35.6)I.D. HOLE
2.15" (54.6)I.D. HOLE
Wall Plates
Premarked W
all PlatesWall PlatesPremarked Stainless Steel and Nylon Wall Plates
EMERGENCY
PJ1RME
EMERGENCY
PJ8RMEV
EMERGENCY
S82MEV
EMERGENCY
S1MES8MEV
EMERGENCY
“EMERGENCY” Wall Plates
Stainless Steel, Type 302/304, Standard SizeEngraved Red Filled, Recessed LetteringDescription Catalog Numbers1-gang, 1 duplex, vertical mount. S8MEV2-gang, 2 duplex. S82MEV1-gang, 1 switch. S1ME
Red Nylon Mid-SizeHot Stamped, Recessed White LetteringDescription Catalog Numbers1-gang, 1 duplex, vertical mount. PJ8RMEV1-gang, 1 switch. PJ1RME
Mid-size plate dimensions shown on page K-28. All lettering .25” (6.3) high.
K-17Dimensions in Inches (mm) www.hubbell-wiring.com
Prem
arke
d W
all P
late
sW
all P
late
sWall PlatesPremarked Nylon Wall PlatesHot Stamped, Black Recessed Lettering
K-18 Dimensions in Inches (mm)www.hubbell-wiring.com
SPJ26CPJ26C
COMPUTER
ONLY
PJ82CO
Computer Only
PJ8COPJ8C
COMPUTERONLY
IGP720
1.60" (40.6)I.D. HOLE
ISOLATEDGROUND
IGP7
1.40" (35.6)I.D. HOLE
ISOLATEDGROUND
IGHPS1
ISOLATED
GROUND
IGP8
ISOLATEDGROUND
Orange Nylon Standard Size Wall PlatesHot Stamped, Recessed Black Lettering“ISOLATED GROUND”Description Catalog Numbers1-gang, 1 duplex. IGP81-gang, 1 duplex, no marking. P8OR1-gang, rectangular opening. IGHPS11-gang, 1 opening for face diameter 1.36”-1.39” (34.5-35.3). IGP71-gang, 1 opening for 20A and 30A Twist-Lock® IGP720with face diameter 1.55”-1.58” (39.4-40.1).
Wall Plates for Single ReceptaclesGroup A Group B Group C Group D Group E
Boss diameter Boss diameter Boss diameter Boss diameter Boss diameter1.36” to 1.39” 1.55” to 1.58” 1.68” to 1.72” 2.09” to 2.13” 2.28” to 2.44”(34.5 to 35.3) (39.4 to 40.1) (42.7 to 43.7) (53.1 to 54.1) (57.9 to 62.0)One Two One Two One Two One Two TwoGang Gang Gang Gang Gang Gang Gang Gang Gang
Weatherproof Lift Cover Plates for WDL “Closed” and WDL “Open,” Single GangGroup A Group B Group C Group DBoss diameter Boss diameter Boss diameter Boss diameter 50A 30A,1.36” to 1.39” 1.55” to 1.58” 1.68” to 1.72” 2.09” to 2.13” Twist-Lock® 4W Hubbellock®
(34.5 to 35.3) (39.4 to 40.1) (42.7 to 43.7) (53.1 to 54.1) Receptacles ReceptaclesThermoplastic, HBL7423WO HBL7425WOA HBL7424WO – HBL7774WO –WET LOCATIONS with cover “open,” gray.Thermoplastic, HBL74CM23WO HBL74CM25WOA HBL74CM24WO – HBL77CM74WO –WET LOCATIONS with cover “open,” yellow.Cast aluminum, – HBL7420 HBL3393 HBL9420 HBL7770 HBL20405WET LOCATIONS HBL20446*with cover “closed”.
The “CS” versions of 50A Twist-Lock® receptacles will only fit these thermoplastic plates. *Plate painted red for Cat. HBL20443 only. Cat. No. HBL20405 plate for Cat. No. HBL20403 only.
K-19Dimensions in Inches (mm) www.hubbell-wiring.com
SpecificationsTamper resistant wall plate single gang duplex receptacle shall be of the following construction:
Secu
rity
Wal
l Pla
tes
Wal
l Pla
tes
Wall PlatesSecurity Wall Plates
K-20 Dimensions in Inches (mm)www.hubbell-wiring.com
SWPBIT
SWP28
SWP18SWP82
SWP8SWP1
1-Gang, WhiteDescription Catalog NumbersToggle switch. SWP1Duplex receptacle. SWP8GFCI/Style Line® device. SWP26Telephone or TV opening (.64”). SWP12Blank. SWP13
2-Gang, WhiteDescription Catalog NumbersTwo toggle switches. SWP2Two duplex receptacles. SWP82One switch, one duplex receptacle. SWP18Two rectangular openings. SWP262One duplex receptacle, one telephone or TV. SWP812One duplex receptacle, one blank. SWP813Double Blank SWP23
3-Gang, WhiteDescription Catalog NumberTwo switches, one duplex receptacle. SWP28
AccessoriesDescription Catalog NumberTamperproof screwdriver for security wall plates. SWPBIT
A D
G
H
E
C
FB
Cover plate: One piece #14 cold rolled zinc plated steel.Plate shall have a five stage baked white polyester powderenamel finish. Gloss: 85%, reflectance: 93%, hardnessminimum: 2H and pass 600 hour salt spray test.
Back plate: #10 cold rolled galvanized steel. Plate assemblyshall use four (4) #8-32 X 1/2” stainless steel T-20 TORX headscrews with center pin reject. Plate must be UL listed to UL514D and comply with the NEC®.
Wall Plates
While In U
se Weatherproof Plates
Wall PlatesWeatherproof CoversFor Maximum In-Use Protection
1-Gang Receptacle, VerticalDescription Catalog NumbersFor face dia. of 1.55” to 1.58” (39.4-40.1). WP7DFor face dia. of 2.09” to 2.13” (53.1-54.1). WP723D
Non-Metallic High Impact Polycarbonate1-Gang, VerticalDescription Catalog NumberDuplex or GFCI/Style Line® device. WP826MP
1-Gang, HorizontalDescription Catalog NumberDuplex or GFCI/Style Line® device. WP826MHP
SpecificationsMetallic All• Die cast Alloy 360 copper-free®
aluminum for maximum corrosion resistance and durability. Alloy 360 has less than .004% copper content.
• Finish is baked aluminum lacquer.
K-21Dimensions in Inches (mm) www.hubbell-wiring.com
Non-metallic• Impact resistant polycarbonate, an
extremely durable thermoplastic.• Transparent cover provides visibility to
the connection.
• NEMA 3R rating when used with theappropriate weatherproof outlet boxwhich is intended for outdoor useprimarily to provide a degree ofprotection against rain, sleet, anddamage from external ice formation.
• Box or device mount for flexibility ofinstallation.
• Gaskets are closed-cell foam.• Meets OSHA lockout/tagout
requirements.• Latching covers hold securely.• Large cord openings.• Clearly marked UL and CSA logos.• Covers include gasket and mounting
screws. Lids have gasketless design.• UL Listed/CSA Certified.• Devices not included.• Holes for padlocks are 1/4” (6.4 dia.).• Drill points in four corners for box
mounting.
Wea
ther
proo
f Pla
tes
Wal
l Pla
tes
Wall PlatesWeatherproof Plates for Receptacles and SwitchesVertical, for FS/FD box mounting
K-22 Dimensions in Inches (mm)www.hubbell-wiring.com
HBL3393
HBL7320
HBL7420
HBL7424WO
HBL7425WOA
HBL7423WO
For Receptacles With Face Diameters of 1.36”-1.39” (34.5-35.3)Description Catalog NumbersThermoplastic, WET LOCATIONS with cover “open,” gray. HBL7423WOThermoplastic, WET LOCATIONS with cover “open,” yellow. HBL74CM23WOCast aluminum, WET LOCATIONS with cover “closed.” HBL7420
For Receptacles With Face Diameters of 1.55”-1.58” (39.4-40.1)Description Catalog NumbersThermoplastic, WET LOCATIONS with cover “open,” gray. HBL7425WOAThermoplastic, WET LOCATIONS with cover “open,” yellow. HBL74CM25WOACast aluminum, WET LOCATIONS with cover “closed.” HBL7420Cast aluminum, no lift cover, NOT weatherproof. HBL7320
For Receptacles With Face Diameters of 1.68”-1.72” (42.7-43.7)Description Catalog NumbersThermoplastic. WET LOCATIONS with cover “open,” gray. HBL7424WOThermoplastic. WET LOCATIONS with cover “open,” yellow. HBL74CM24WOCast aluminum. WET LOCATIONS with cover “closed.” HBL3393Cast aluminum, no lift cover, NOT weatherproof. HBL3394
A fiber shield is furnished with HBL7420 plate. An effective means ofweatherproofing toggle and lock type switches when this shield is used in combinationwith the plate.All weatherproof lift cover plates on this page are listed by Underwriters Laboratories,Inc. as “WDL Closed” for use in wet locations with cover closed and in damp locations.
Weatherproof Covers For Single Receptacles On FS/FD BoxesNote: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER
CLOSED, for intermittent use in wet locations or use in damp locations. Thosewith suffix WO are listed for WET LOCATIONS with cover open in continuoususe. All plates are gasketed and self-closing.
National Electrical CodeReceptacles in Damp or Wet Locations.(a) Damp Locations. A receptacle installed outdoors in a location protected from theweather or in other damp locations shall have an enclosure for the receptacle that isweatherproof when the receptacle is covered (attachment plug cap not inserted andreceptacle covers closed). An installation suitable for wet locations shall also be considered suitable for damplocations. A receptacle shall be considered to be in a location protected from the weather wherelocated under roofed open porches, canopies, marquees, and the like, and will not besubjected to a beating rain or water run-off.(b) Wet Locations.(1) A receptacle installed in a wet location where the product intended to be pluggedinto it is not attended while in use (e.g., sprinkler system controllers, landscapelighting, holiday lights, etc.) shall have an enclosure that is weatherproof with theattachment plug cap inserted or removed.(2) A receptacle installed in a wet location where the product intended to be pluggedinto it will be attended while in use (e.g., portable tools, etc.) shall have an enclosurethat is weatherproof when the attachment plug cap is removed.
IP44SUITABILITY
Wall Plates
Weatherproof Plates
Wall PlatesWeatherproof Plates for Receptacles and InletsFor FS/FD Box Mounting
HBL7770
HBL20405
HBL9420
HBL7774WO
HBL7777A
For Receptacles with Face Diameters of 2.28”-2.44” (57.9-62.0)Description Catalog NumbersThermoplastic, 2-gang, WET LOCATIONS with cover “closed,” gray. HBL7777AThermoplastic, 2-gang, WET LOCATIONS with cover “closed,” yellow. HBL77CM77AThermoplastic, 2-gang, WET LOCATIONS with cover “closed,” gray. HBL7777
For Receptacles with Face Diameters of 2.09”-2.13” (53.1-54.1)Description Catalog NumbersCast aluminum, WET LOCATIONS with cover “closed.” HBL9420Cast aluminum, no lift cover, NOT weatherproof. HBL9419
For 50A Twist-Lock® Single ReceptaclesDescription Catalog NumbersThermoplastic, WET LOCATIONS with cover “open,” gray. HBL7774WO*Thermoplastic, WET LOCATIONS with cover “open,” yellow. HBL77CM74WO*Cast aluminum, WET LOCATIONS with cover “closed.” HBL7770Galvanized Steel, fits 4” square, 4 11/16” or 2 gang box. HBL50SC
For 30A, 4 Wire Hubbellock® ReceptaclesDescription Catalog NumbersCast aluminum, WET LOCATIONS with cover “closed.” HBL20405Cast aluminum, WET LOCATIONS with cover “closed,” red HBL20446Cast aluminum, no lift cover, NOT weatherproof. HBL20406
Will fit FS/FD boxes having plate mounting holes on 3.25” x 3.75” (82.6 x 95.3) centers.Will only fit old style porcelain face devices.
*Note: The “CS” versions of 50A Twist-Lock® will only fit these plates.
Weatherproof Covers For Single Receptacles For Use On FS/FD BoxesNote: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER
CLOSED, for intermittent use in wet locations or use in damp locations. Thosewith suffix WO are listed for WET LOCATIONS with cover open in continuoususe. All plates are gasketed and self-closing.
AccessoriesDescription Catalog NumbersSub-plate for mounting and weatherproofing flanged inlets such 7452as HBL5278, HBL7556, HBL4716, etc. when used with a HBL7420 or HBL7425WOA type weatherproof plate.Adapter plate for mounting HBL7423WO, HBL7424WO, HBL7349HBL7425WOA or HBL7420 plates to standard boxes.
2.00"(50.8)
3.63"(92.2)
7452
1.56"(39.6)
3.28"(83.3)
8-Holes.16" (4.1)
Dia.
2.13"(54.1)
HBL7349
HUBBELL
2.84"(72.1)
4.56"(115.8)
3.25"(82.6)
.19" (4.8)DIA.
4 HOLES
3.31"(84.0)
1.88"(47.8)
Typical Plate, Single Gang
K-23Dimensions in Inches (mm) www.hubbell-wiring.com
IP44SUITABILITY
Wea
ther
proo
f Pla
tes
Wal
l Pla
tes
Wall PlatesWeatherproof Plates for Duplex, GFCI, SurgeReceptacles and STYLE LINE® Devices
K-24 Dimensions in Inches (mm)www.hubbell-wiring.com
CWP26H
WPFS26
CWP8H
HBL5206WO
HBL5221
Duplex Plates For Vertical MountingDescription Catalog NumbersThermoplastic, gray, for FS/FD box mounting. HBL5221Thermoplastic, yellow, for FS/FD box mounting. HBL52CM21Thermoplastic, gray, for device mounting. HBL5222Thermoplastic, yellow, for device mounting. HBL52CM22
Duplex Plates For Horizontal MountingDescription Catalog NumbersCast aluminum, for device mounting. HBL5205WOCast aluminum, for FS/FD box mounting. HBL5206WOZinc die cast, commercial grade, for device mounting. CWP8H
Note: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVERCLOSED, for intermittent use in wet locations or use in damp locations. Thosewith Suffix WO are listed for WET LOCATIONS with cover open in continuoususe. All plates are gasketed and self-closing.
IP44SUITABILITY
Wall Plates
Weatherproof Sw
itch Plates, Locking Covers and Accessories
Wall PlatesWeatherproof Switch Plates and Locking CoversSingle 15A and 20A Straight Blade Receptacles and Accessories
HBL6187shown with receptacle
and back box(sold separately)
HBL96067shown with receptacle
(sold separately)
HBL96061shown with wallplate and switch
(sold separately)
HBL1795
Weatherproof Switch PlateDescription Catalog NumberClear bubble plate, elastomer for use with all general HBL1795purpose AC toggle switches and PresSwitch® switches. Fits FS/FD and standard boxes.
Brass Locking Attachment for SwitchesAvailable in master keying and straight keying systems.
Description Catalog NumbersStraight keying (all locks alike) appropriate for most applications. HBL96061Straight cylinder type lock, each HBL96061 ordered operates on the same key - all locks are keyed alike.Straight keying (individual). HBL96062Straight cylinder type lock, each HBL96062 ordered operates on a different key. All locks are keyed differently and individually. This type cannot be master keyed.Master keying (individual). HBL96060Cylinder type lock for master keying, each lock keyed individually with a master key to operate all locks.
Also available in dull chrome finish to match stainless steel.Add “DCH” suffix to catalog number.
Brass Locking Cover PlateDescription Catalog NumberLocking cover plate for single 15A & 20A straight blade receptacles HBL96067and 15A Twist-Lock® receptacles. Straight cylinder type lock.All cylinder locks keyed alike.
AccessoriesDescription Catalog NumbersWeather shield plate, angle plate for duplex receptacles. HBL6187Red rectangular jewel in metal frame for switch plates. HBL7298Brass plated screw, standard slot, .38” (9.7) long. HBL7341Stainless steel screw, standard slot, .38” (9.7) long. HBL7341SSBrass tamper-proof screw .38” (9.7) long. HBL7169Same as above except dull chrome to match S/S plates. HBL7169DCHTamper-proof screwdriver for HBL7169 etc. HBL7170
HBL7341 HBL7170
HBL7298
K-25Dimensions in Inches (mm) www.hubbell-wiring.com
IP44SUITABILITY
HBL7169
Wea
ther
proo
f Pla
tes
for F
lang
ed D
evic
esW
all P
late
sWall PlatesWeatherproof Liftcover PlatesFor Flanged Inlets and Flanged Receptacles
K-26 Dimensions in Inches (mm)www.hubbell-wiring.com
SpecificationsWall PlatesTechnical InformationSpecificationsListingsNon-Metallic Plates UL Standard 514D, #E92074.Metallic Plates UL Standard 514D, #E31999.Certification CSA Standard C22.2 No. 42.1.
Determine number of gangsrequired and enter in box markedcatalog number next to material.
Step 3: Select the custommetal wall plate configuration.Refer to the custom wall plateconfiguration chart to select aconfiguration for each gang in thewall plate. Each configuration has aspecific 3-digit code located in theright hand side of the chart onpages K-30–K-34. Enter this 3-digitconfiguration code in thecorresponding box on the orderform grid to match the positionrequired on the finished custom wallplate.
The 3-digit numbers listed at theupper right of the Sample OrderForm (001, 149, etc.) represent thecustom wall metal plate selected onthe right. See Configuration Chartand Hubbell Configuration SelectorGuide on pages K-30–K-34 foradditional configuration choices.
Enter Catalog Number
WC* SS 4
*WC and H are preprinted on the distributor order form.Number to use for pricing.
Cus
tom
Met
al W
all P
late
sW
all P
late
sWall PlatesHubbell Custom Metal Wall PlateConfiguration Chart
K-30 Dimensions in Inches (mm)www.hubbell-wiring.com
001Switch.
007Single Receptacle.
008Duplex Receptacle.
011One-gang .635” ID (16.1)Hole Box Mounted with.50” ID (12.7) NylonBushing.
012One-gang .635” ID (16.1)Hole Strap Mtd. incl. Strapwith .50” ID (12.7) NylonBushing.
013Blank Box Mount.
014Blank Strap Mtd. incl. Strap.
026Rectangular Opening.
055One-gang .375” ID (9.5)Hole Strap Mtd. incl. Strap.
056One-gang .375” ID (9.5)Hole Box Mounted.
057One-gang .50” ID (12.7)Hole Strap Mtd. incl. Strap.
415IBM Type Opening withOne .586” X .762” (14.9 X19.3).
Voice/Data Opening470.542” X .750” Vertical BoxMtd. (13.8 X 19.0).473.586” X .762” Vertical BoxMtd. (14.9 X 19.4).476.586” X .815” Vertical BoxMtd. (14.9 X 20.7).479.575” X .783” Vertical BoxMtd. (14.6 X 19.9).
471.542” X .750” Vertical BoxMtd. (13.8 X 19.0).474.586” X .762” Vertical BoxMtd. (14.9 X 19.4).477.586” X .815” Vertical BoxMtd. (14.9 X 20.7).480.575” X .783” Vertical BoxMtd. (14.6 X 19.9).
Available in smoothmetal, standard sizeonly up to and including8-gang type
4.53"(115.1)
2.78"(70.6)
For detailed dimensions of the above configurations, see pages K-31 to K-34.
Wall Plates
Custom
Metal W
all PlatesWall PlatesHubbell Configuration Selector GuideCustom Metal Wall Plates
Configuration001
Toggle Switch Plate.
Configuration007
Single 15 or 20A StraightBlade Receptacle.15A Twist-Lock® Receptacle.
Configuration008
Duplex Receptacle.
Configuration011
Single, .635” (16.1)Telephone (Box Mount).
Configuration012
Single, .635” (16.1)Telephone (Strap Mount).
Configuration013
Blank Plate (Box Mount).
Configuration014
Blank Plate (Strap Mount).
Configuration026
GFI/Rectangular Opening.
Configuration055
Single, .375” (9.5)Telephone (Strap Mount).
Configuration056
Single, .375” (9.5)Telephone (Box Mount).
Configuration057
Single, .50” (12.7)Telephone (Strap Mount).
Configuration058
Single, .50” (12.7)Telephone (Box Mount).
K-31Dimensions in Inches (mm) www.hubbell-wiring.com
2.78"(70.6)
4.53"(115.1)
2.38"(60.5)
.925"(23.5)
.406"(10.3)
(2) Mtg. Holes for #6-32
Screw
1.405" DIA(35.7)
4.53"(115.1)
2.38"(60.5)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
4.53"(115.1)
2.78"(70.6)
Mtg. Hole for #6-32 Screw
.41"(10.4)
1.34" DIA(34.0)
.56"(14.2)
1.53"(38.9)
2.66"(67.6)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.635" DIA(16.1)
.50" DIA(12.7)w/Bushing
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
4.53"(115.1)
2.38"(60.5)
1.32"(33.5)
.09" R(2.3)
3.81"(96.8)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
2.64"(67.1)
4.53"(115.1)
2.38"(60.5)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
.375" DIA(9.5)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.375" DIA(9.5)
4.53"(115.1)
2.38"(60.5)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
.50" DIA(12.7)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.50" DIA(12.7)4.53"
(115.1) 3.28"(83.3)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
4.53"(115.1)
2.38"(60.5)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
.635" DIA(16.1)
.50" DIA(12.7)w/Bushing
Specifications are subject to change without notice.
Configuration091
Single 20 or 30A Twist-Lock®
Receptacle.
Configuration098
Single Receptacle,30 or 50A Straight Blade,3 Wire Power Outlet.
Configuration135
Louvered Plate, Strap Mount.
Configuration149
Totally Blank Plate.
Configuration295
RS232 Port Single 25-Pin(Box Mount).
Configuration314
IBM Type (Box Mount).
Configuration411
Dual .635” (16.1) Holes (Box Mount).
Configuration415
IBM Type and Modular Jack(Box Mount).
Configuration422
Single .505” (12.8) D-Hole(Box Mount).
Configuration423
Dual .505” (12.8) D-Holes(Box Mount).
Configuration425
Single .505” (12.8) D-Hole(Box Mount).
Configuration426
Dual .505” (12.8) D-Holes(Box Mount).
Cus
tom
Met
al W
all P
late
sW
all P
late
sWall PlatesHubbell Configuration Selector GuideCustom Metal Wall Plates
K-32 Dimensions in Inches (mm)www.hubbell-wiring.com
4.53"(115.1)
2.38"(60.5)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
1.595" DIA(40.5)
4.53"(115.1)
2.50"(63.5)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
2.156" DIA(54.7)
4.53"(115.1) 2.38"
(60.5)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
4.53"(115.1)
2.78"(70.6)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.635" (16.1) DIA(2) Typ
.50" DIA(12.7)w/Bushing
1.50"(38.1)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.98"(24.9)
.89"(22.6)
1.02"(259)
.86"(21.8)
.80"(20.3)
.71"(18.0)
1.50"(38.1)
.762"(19.4)
.586"(14.9)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.505" DIA(12.8)
.436"(11.1)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.436" (11.1)(2) TYP.505" DIA(12.8)
1.50"(38.1)
.473"(12.0)
.505" DIA(12.8)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.473"(12.0)4.53"
(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
1.50"(38.1)
.505" DIA(12.8) (2) Typ
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
1.02"(25.9)
.86"(21.8)
.80"(20.3)
.71"(18.0)
.98"(24.9)
.89"(22.6)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
1.66"(42.1)
1.86"(47.2)
.13" (3.3)
.45"(11.4)
.06" (1.5) R(2) Typ
.09" (2.3) (4) Typ
Specifications are subject to change without notice.
Wall Plates
Custom
Metal W
all PlatesWall PlatesHubbell Configuration Selector GuideCustom Metal Wall Plates
K-33Dimensions in Inches (mm) www.hubbell-wiring.com
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.550"(14.0)
.580" DIA(14.7)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.550"(14.0)
1.50"(38.1)
.580" (14.7) D(2) Typ
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.755" DIA(19.2)
.731"(18.6)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.731"(18.6)
1.50"(38.1)
.755" DIA(19.2) (2) Typ
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.375" DIA(9.5)(2) Typ
1.50"(38.1)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.500" DIA(12.7)(2) Typ
1.50"(38.1)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.750"(19.0)
.542"(13.8)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.542"(13.8)-(2) Typ
.750"(19.0)
1.50"(38.1)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.586"(14.9)
.762"(19.4)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.586"(14.9)-(2) Typ
.762"(19.4)
1.50"(38.1)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
1.32"(33.5)
1.156"(29.4)
.443"(11.3)
.06" R(1.5)
.09" R(2.3)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.84"(21.3)
1.01"(25.7)
.44"(11.2)
.06" R(1.5)
.09" R(2.3)
Specifications are subject to change without notice.
Configuration428
Single .580” (14.7) D-Hole(Box Mount).
Configuration429
Dual .580” (14.7) D-Holes(Box Mount).
Configuration430
Single .755” (19.2) D-Hole(Box Mount).
Configuration431
Dual .755” (19.2) D-Holes(Box Mount).
Configuration435
Single 9-Pin RS232(Box Mount).
Configuration438
Single 15-Pin RS232(Box Mount).
Configuration456
Dual .375” (9.5) Round(Box Mount).
Configuration458
Dual .50” (12.7) Round(Box Mount).
Configuration470
Single Modular Jack(Box Mount).
Configuration471
Dual Modular Jack(Box Mount).
Configuration473
Single Modular Jack(Box Mount).
Configuration474
Dual Modular Jack(Box Mount).
Cus
tom
Met
al W
all P
late
sW
all P
late
sWall PlatesHubbell Configuration Selector GuideCustom Metal Wall Plates
K-34 Dimensions in Inches (mm)www.hubbell-wiring.com
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.586"(14.9)
.815"(20.7)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.815"(20.7)
1.50"(38.1)
.586"(14.9)-(2) Typ
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.575"(14.6)
.783"(19.9)
4.53"(115.1)
2.78"(70.6)
(2) Mtg. Holes for #6-32
Screw
3.28"(83.3)
.783"(19.9)
1.50"(38.1)
.575"(14.6)-(2) Typ
Specifications are subject to change without notice.