Wall Mounted Type Inverter Air Conditioners Co oling Heating Dehumidifying Fan Inverter Technology The inverter technology eliminates the stop- start cycles in tradional air condioners. This technology has the ability to connuously regulate its thermal transfer by altering the compressor's speed according to the cooling demand. This results in the eliminaon of sharp fluctuaons in the electrical supply, more efficiency and less costly to operate. Fungus Proof Funcon The 'Fungusproof' funcon is a special dry and an- mold feature. This funcon only works on the Cool, Dry and Auto modes. The horizontal wind guiding bars are set in the inial posion for cooling while the internal fan runs for 3 minutes on low speed. Any mold that grows inside the evaporator due to water disposion will be dried and thus the air condioner will not disperse bad odors. This is not a factory set feature but can be easily acvated from the remote control. Clean Funcon The purpose of this funcon is to remove dust which seles on the evaporator and to dry the water inside the evaporator and to prevent the evaporator from molding due to water deposion which results in the release of bad odours. disposion which results in the dispersion of bad odors. This funcon runs for a maximum me of 35 minutes. Ionizer The ionizer releases posive and negave ions, thus it disinfects and diminishes bad smells in the room. Furthermore it gathers house dust, pollen and other small parcles that are responisible for allergies. At the same me it generates negave ions, in order to create a safe, healthy and relaxing environment. This does not only purify the air that goes through the air condioner, but also the harmful substanes and odors that surround the unit. Features Timer, 3 Fan Speeds, Swing Funcon, 16°C - 32°C Temperature Range, LCD On/Off ASW-H09A4/FAR1DI-EU ASW-H12A4/FAR1DI-EU ASW-H18A4/FAR1DI-EU ASW-H24A4/FAR1DI-EU
2
Embed
Wall Mounted Type Inverter Air Conditionerstopchoice.com.mt/pdf/Royal_Air_Conditioners_Brochure_2016.pdf · Inverter Air Conditioners Cooling Heating Dehumidifying Fan Inverter Technology
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Wall Mounted TypeInverter Air Conditioners
Co oling
Heating
Dehumidifying
Fan
Inverter Technology
The inverter technology eliminates the stop- start cycles in traditional air conditioners. This technology has the ability to continuously regulate its thermal transfer by altering the compressor's speed according to the cooling demand. This results in the elimination of sharp fluctuations in the electrical supply, more efficiency and lesscostly to operate.
Fungus Proof Function
The 'Fungusproof' function is a special dry and anti- mold feature. This function only works on the Cool, Dry and Auto modes. The horizontal wind guiding bars are set in the initial position for cooling while the internal fan runs for 3 minutes on low speed. Any mold that grows inside the evaporator due to water disposition will be dried and thus the air conditioner will not disperse bad odors. This is not a factory set feature but can be easily activatedfrom the remote control.
Clean Function
The purpose of this function is to remove dust which settles on the evaporator and to dry the water inside the evaporator and to prevent the evaporator from molding due to water deposition which results in the release of bad odours.disposition which results in the dispersion of bad odors. This function runs for a maximum time of 35 minutes.
Ionizer
The ionizer releases positive and negative ions, thus it disinfects and diminishes bad smells in the room. Furthermore it gathers house dust, pollen and other small particles that are responisible for allergies. At the same time it generates negative ions, in order to create a safe, healthy and relaxing environment. This does not only purify the air that goes through the air conditioner, but also the harmful substanes and odors that surround the unit.