Wall-Mounted Cutoff Mini Area Lighter, Polycarbonate Refractor, Lamp Included Use for entrances, stairwells, corridors and other pedestrian areas. Wall-Paks Catalog Number Designation HIGH PRESSURE SODIUM 35W TWAC 35S 1 BOW TWAC 60S 2 70W TWAC 70S 100W TWAC 100S METAL HALIDE BOW TWAC BOM 70W TWAC 70M 100W TWAC 100M COMPACT FLUORESCENT Example: TWAC 100M 120 LPI I I Voltage Options/Accessories LPI is standard on all TWA fixtures (not available with incandescent) For options and accessories, see page 312 120 208 4 240 4 277 347 TB 3 22W 26W 28W 32W 42W TWAC 22DTT TWAC 26DTT TWAC 28DTT TWAC 32TRT TWAC 42TRT STANDARD PACKAGING Fixtures ship complete in unit cartons only Example (Qty 13) TWAC 100M 120 LPI (13 cartons of 1 fixture) Accessories ship separately All dimensions are inches (centimeters) unless otherwise specified NOTES 1 120Vonly 2 120Vor277Vonly 3 Optionalmulti-tapballast(120,208,240,277V) (120,277,347VmCanada) 4 Consult factory for availability in Canada CANADIAN SHIPMENTS Add CSA as suffix to catalog number HID and fluorescent lamps included with lumi- naire 11 11 Lamp/Fixture/Ballast Data Weight Wattage Ballast Lbs Kg______ HIGH PRESSURE SODIUM (Med/Clear) 35 RNP 50 RNP 50 XHP 70 RNP 100 RNP METAL HALIDE 50 XHP 70 XHP 100 XHP 11 5 11 5 11 5 14 64 14 64 14 6.4 DIMENSIONS Height 10(254) Width 11 1/2 (292) Depth 8 15/16 (52) V / 1 X^ ° _S ^_____ ,., _____ ^ 1- 1 1 •c—— •'International. :Dark Sky "•.•Member .;,' TWAC Contour Series® Features Housing: Rear housing is rugged, corro- sion-resistant, die-cast aluminum. Front cover is one-piece, UV-resistant, injection- molded polycarbonate, internally painted. Captive external hardware is treated fur corrosion resistance and included slotted hex-head and tamperproof fasteners. Optics: One-piece, die-formed reflector is dif- fused aluminum. Refractor is clear polycar- bonate, providing IBS cutoff distribution and maximum lateral light output. Front cover is sealed and gasketed to inhibit the entrance of outside contaminants. Lamp: Medium-base HPS, MH or two/four- pm fluorescent lamps included. Ballast: MH: high-reactance, high-power factor standard. HPS: Reactor normal power factor standard, HPF available. UL listed. Electrical components are mounted to the cast-aluminum housing, promoting maximum heat dissipation. (For 50 hertz availability, consult factory). Fluorescent ballasts are magnetic NPF (TT, DTT) or electronic HPF (TRT). Encased and potted solid-state igm- tors (HPS). HID ballasts are 100% factory tested and UL listed. Fluorescent ballasts are UL listed. Components are heat-smked di- rectly to the cast housing for maximum heat dissipation. (For 50 hertz availability, consult factory.) Installation: Mount to any vertical surface or to a A" round or A" equaro outlot box Dock access through gasketed slot. Top wiring access Xhrought A/2" thveaded conduit en- try. (Through-wiring requires use of a con- duit tee.) Photocells are field-installable. Socket: HID is porcelain, horizontally ori- ented medium-base socket with copper alloy, nickel-plated screw shell and center contact. UL listed 660W, 600V and 4kV pulse rated. Fluorescent socket is two-pin (DTT) or four-pin (TRT), positive latching thermoplastic. Listings: UL, listed suitable for wet loca- tions. IP65 rated in accordance with IEC Standard 529. Listed and labeled to comply with Canadian Standards. fA L/THtJN/A UBHT/NB PSG6 269
2
Embed
Wall-Mounted Cutoff Mini Area Lighter, Wall-Paks ... · PDF filePolycarbonate Refractor, Lamp Included Use for entrances, ... injection-molded polycarbonate, ... (TT, DTT) or electronic
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Wall-Mounted Cutoff Mini Area Lighter,Polycarbonate Refractor, Lamp Included
Use for entrances, stairwells, corridors and other pedestrian areas.
Wall-Paks
Catalog Number
Designation
HIGH PRESSURE SODIUM35W TWAC 35S1
BOW TWAC 60S2
70W TWAC 70S100W TWAC 100S
METAL HALIDEBOW TWAC BOM70W TWAC 70M
100W TWAC 100M
COMPACT FLUORESCENT
Example: TWAC 100M 120 LPI
I IVoltage Options/Accessories
LPI is standard on all TWA fixtures(not available with incandescent)For options and accessories, see
FeaturesHousing: Rear housing is rugged, corro-sion-resistant, die-cast aluminum. Frontcover is one-piece, UV-resistant, injection-molded polycarbonate, internally painted.Captive external hardware is treated furcorrosion resistance and included slottedhex-head and tamperproof fasteners.
Optics: One-piece, die-formed reflector is dif-fused aluminum. Refractor is clear polycar-bonate, providing IBS cutoff distribution andmaximum lateral light output. Front cover issealed and gasketed to inhibit the entranceof outside contaminants.
Lamp: Medium-base HPS, MH or two/four-pm fluorescent lamps included.
Ballast: MH: high-reactance, high-powerfactor standard. HPS: Reactor normal powerfactor standard, HPF available. UL listed.Electrical components are mounted to thecast-aluminum housing, promoting maximumheat dissipation. (For 50 hertz availability,consult factory). Fluorescent ballasts aremagnetic NPF (TT, DTT) or electronic HPF(TRT). Encased and potted solid-state igm-tors (HPS). HID ballasts are 100% factorytested and UL listed. Fluorescent ballasts areUL listed. Components are heat-smked di-rectly to the cast housing for maximum heatdissipation. (For 50 hertz availability, consultfactory.)
Installation: Mount to any vertical surfaceor to a A" round or A" equaro outlot box Dockaccess through gasketed slot. Top wiringaccess Xhrought A/2" thveaded conduit en-try. (Through-wiring requires use of a con-duit tee.) Photocells are field-installable.
Socket: HID is porcelain, horizontally ori-ented medium-base socket with copperalloy, nickel-plated screw shell and centercontact. UL listed 660W, 600V and 4kVpulse rated. Fluorescent socket is two-pin(DTT) or four-pin (TRT), positive latchingthermoplast ic .
Listings: UL, listed suitable for wet loca-tions. IP65 rated in accordance with IECStandard 529. Listed and labeled to complywith Canadian Standards.
fA L/THtJN/A UBHT/NB PSG6 269
Rough Service Lighting
VR3CVR4C
VR4C
FeaturesLens: Clear prismatic polycarbonate, UV-stabilized, nominal thickness .125". Prism op-tics provide uniformity with maximum spac-ing-to-mounting height ratios. Lens securedby tamper-resistant Torx®-head TX20 orstandard slotted hex-head screws (foureach included). One-piece silicone perime-ter gasket seals out moisture and contami-nants. ;
Housing: One-piece, die-castaluminum, lowcopper alloy, finished in dark bronze polyes-ter powder coat. 1
Lamps: Included unless L/LP is specified.MH: reduced-UV lamp is standard.
Ballast: Fluorescent: electronic, high pow-er factor, starting temperature 0°F (-18°C).Exception: 22DTT and 28DTT are electro-magnetic, 120V only. HID: high-reactance,high power factor (175M is constant-watt-age autotransformer).
Socket: Fluorescent: horizontally-mountedthermoplastic. HID: medium-base porcelainwith copper alloy, nickel-plated screw shelland center contact. UL listed 660W, 600V,4KV pulse rated.
Installation: Wall- or cei l ing-mountedas indicated. For maximum vandal resis-tance, use four-hole mounting pattern.
Listings: UL listed for damp locations (wetlocations in covered ceiling applicationsonly). Incandescent: U L 1 5 7 1 listed. Fluores-cent: UL 1570 listed. Listed and labeled tocomply with Canadian Standards.466
Clear Polycarbonate LensCompact Fluorescent/HID
Catalog Number Example: VR3C 32TRT 120 GLR LPI
SeriesVR3C 9"x9"
VR4C 1 2 " x 1 2 "
Lamp type4
VR3C VR4CFluorescent
2/7TT6
2/9TT
twin-tube(s)2/7TT6
2/9TT13TT6
2/13TT
Voltage1201 , 2088,
2408, 27718 , 347,4808, TB2'8
Lamps23
LPI Lamp(s)included(standard)
L/LP Less lamp(s)
Options
Double twin-tube(s)18DTT
2/18DTT22DTT56
2/22DTT56
26DTT2/26DTT28DTT56
—
18DTT2/18DTT22DTT56
2/22DTT56
26DTT2/26DTT28DTT56
2/28DTT56
Triple-tube(s)26TRT 26TRT
2/26TRT 2/26TRT32TRT 32TRT
— 2/32TRT42TRT 42TRT
— 2/42TRT
High Pressure Sodium
35S 35SSOS SOS70S6 70S6
100S 100S— 150S
Metal HalideBOM 50M
70M10 70M10
100M1 100M— 150M7
— 1 7 5 M 7 1 2
L/LP Less lamp4
SF Single fuse (120 - 277)8
DF Double fuse (208 - 240)8
QRS Quartz restrike system (incandes-cent: 7W max.)8
EC Emergency circuit (DC bayonetbase, 15T7DC)8
ML Night-light8
PE PhotocellIR Internal shield Reflector3
GLR Internal fast-blow fusing9
GMF Internal slow-blow fusing9
WP White polycarbonate lensCSA Listed and labeled to comply with
Canadian StandardsNOM Listed and labeled to comply with
Mexican Standards
NOTES:1 Provided with dual tap (120/277V) ballast when ordered
as120Vor277V HIDonly2 Multi-tapballast(120,208,240, 277V) HIDonly.3 Wall mounted units require IR option.4 Lamp(s) included unless specified L/LP5 2-Pin 15mm lamp6 120voltonly.7 Ceiling mount only.8 Available only on HID units9 Compact fluorescent only
10 Notavailablem480V11 Must specify voltage for dual or multi-tap ballast.12 Notavailablein208V,240VorTB.