This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
3
Door Styles ..................................................................................................................4 - 11
Index ......................................................................................................................70 - 71
WA
LL CA
BIN
ETSB
oo
kC
ASES
BA
SE C
AB
INETS
TALL C
AB
INETS
vA
NITy
CA
BIN
ETSA
CC
ESSo
rIES
Table of Contents
ChErry Door STyLES
Available Finishes:Amber (AMNON)Amber/Mocha (AMMCH)Brandy (BYNON)Brandy/Licorice (BYLCH)
DRAWER FRONT OPTION: SOLID (S)
• Traditional overlay• 3/4" thick solid cherry frame• 2 3/16" stiles and rails• 3/16" recessed center panel is "A" face plain sliced cherry
veneer with hardwood veneer back• Miter construction permanently joined with steel clamp nails• Door and drawer front have vertical and horizontal reverse bevel• Decorative hardware not required
CLASSIC2 SQUArE (CL2.Ch.S)
1"
1"
1"
1"
BASE CABINET
1"
7/8" 7/8" 7/8" 7/8"
10°
3/4"
DrawerFront
12° 2 3/16"
3/4"
Door
WALL CABINET
GRAINDIRECTION
GRAINDIRECTION
GRAINDIRECTION
Available Finishes:Amber (AMNON)Brandy (BYNON)
DRAWER FRONT OPTION: SOLID (S)
• Traditional overlay• 3/4" thick solid cherry frame• 2" stiles and rails• 7/16" raised center panel is sliced-cut cherry veneer• Mortise & Tenon construction• Door has horizontal reverse bevel• Drawer front has vertical and horizontal reverse bevel• Decorative hardware not required
Available Finishes:Autumn (AUNON)Natural (NANON)Palomino (PONON)
DRAWER FRONT OPTION: SOLID (S)
• Traditional overlay• 3/4" thick solid hickory frame• 2" stiles and rails• 7/16" raised center panel is sliced-cut hickory veneer• Mortise & Tenon construction• Door has horizontal reverse bevel• Drawer front has vertical and horizontal reverse bevel• Decorative hardware not required
Available Finish:Starlight (SLNON)
DRAWER FRONT OPTION: SOLID (S)
• Full overlay• Machined from 3/4” thick solid MDF. Face and edges have
solid color rigid thermofoil. Back is thermofused melamine.• Beaded center panel, face side has v-grooves on 1 1/2”
centers• Decorative hardware required
Available Finishes:Autumn (AUNON)Natural (NANON)Palomino (PONON)
DRAWER FRONT OPTION: SOLID (S)
• Traditional overlay• 3/4" thick solid hickory frame• 2 3/16" stiles and rails• 9/16" raised center panel is solid hickory• Mortise & Tenon construction• Decorative hardware required
Starlight (SLNON)
DRAWER FRONT OPTION: SOLID (S)
• Full overlay• Machined from 3/4” thick solid MDF. Face and edges have
solid color rigid thermofoil. Back is thermofused melamine.• Raised center panel look• Decorative hardware required
10° 2"
3/4"
WALL CABINET(ARCH SHOWN)
Door
1"
1"
1"
1"
BASE CABINET
1"
7/8" 7/8" 7/8" 7/8"
10°
3/4"
DrawerFront
GRAINDIRECTION
GRAINDIRECTION
GRAINDIRECTION
WALL CABINET(ARCH SHOWN)
1"
1"
1"
1"
BASE CABINET
1"
7/8" 7/8" 7/8"
2 3/16"
3/4"
DrawerFront
3/4"
Door
7/8"
GRAINDIRECTION
GRAINDIRECTION
GRAINDIRECTION
3/8"
BASE CABINET
3/16" 3/16"
3/4"
DrawerFront
3/8"
3/8"WALL CABINET(ARCH SHOWN)
3/8"3/16" 3/16"
3/8"
3/4"
Door
3/8"
BASE CABINET
3/16"3/16" 3/16"
3/4"
DrawerFront
3/8"
3/8"WALL CABINET
3/8"3/16"
3/8"
3/4"
Door
2 5/16"
(Door Style . Specie . Shape)
AX2.MP.B. BTNON .N.NNNN SSS. S .C.B15LHDS
(Drawer Front)(Color & Glaze)
*Designer Series
*Designer Series
*Designer Series selections typically requires an additional week in scheduled delivery.
DRAWER FRONT OPTION: SOLID (S) • Traditional overlay• 3/4" thick solid maple frame• 2 3/16" stiles and rails• 3/16" recessed center panel is "A" face plain sliced maple
veneer with hardwood veneer back• Miter construction permanently joined with steel clamp nails• Door and drawer front have vertical and horizontal reverse bevel• Decorative hardware not required
DRAWER FRONT OPTIONS: 5 PIECE (5) AND SOLID (S)• Full overlay • 3/4" thick solid maple frame • 2 1/2" stiles and rails • 3/16" recessed center panel is "A" face plain sliced maple veneer with hardwood veneer back • Mortise & Tenon construction • Decorative hardware required
DRAWER FRONT OPTION: SOLID (S)• Traditional overlay• 3/4" thick solid maple frame• 2" stiles and rails• 7/16" raised center panel is sliced-cut maple veneer• Mortise & Tenon construction• Door has horizontal reverse bevel• Drawer front has vertical and horizontal reverse bevel• Decorative hardware not required
1"
1"
1"
1"
BASE CABINET
1"
7/8" 7/8" 7/8" 7/8"
10°
3/4"
DrawerFront
12° 2 3/16"
3/4"
Door
WALL CABINET
GRAINDIRECTION
GRAINDIRECTION
GRAINDIRECTION
3/8"
BASE CABINET
3/16" 3/16"
3/4"
DrawerFront
3/8"
3/8"WALL CABINET
3/8"3/16" 3/16"
3/8"
3/4"
Door
GRAINDIRECTION
GRAINDIRECTION
GRAINDIRECTION
10° 2"
3/4"
WALL CABINET(ARCH SHOWN)
Door
1"
1"
1"
1"
BASE CABINET
1"
7/8" 7/8" 7/8" 7/8"
10°
3/4"
DrawerFront
GRAINDIRECTION
GRAINDIRECTION
GRAINDIRECTION
(Door Style . Specie . Shape)
AX2.MP.B. BTNON .N.NNNN.SSS. S .C.B15LHDS
(Drawer Front)(Color & Glaze)
*Designer Series selections typically requires an additional week in scheduled delivery.
DRAWER FRONT OPTION: 5 PIECE (5) • Full overlay• 3/4" thick solid maple frame• 2 1/4" stiles and rails• Bead profile around inside and outside of the door and drawer front
frame and half round pearl beading inlay• 3/16" recessed center panel is "A" face plain sliced maple veneer
with hardwood veneer back• Miter construction• Decorative hardware required
DRAWER FRONT OPTION: 5 PIECE (5)• Full overlay• 3/4" thick solid maple frame• 2 9/16" stiles and rails• 1/2" raised center panel is sliced-cut maple veneer with hardwood veneer back• Miter construction• Decorative hardware required
DRAWER FRONT OPTIONS: 5 PIECE (5) AND SOLID (S)• Full overlay• 3/4" thick solid maple frame• 3" stiles and rails• 3/16" recessed center panel is sliced-cut maple veneer face and hardwood veneer back• Mortise & Tenon construction• Decorative hardware required
• Traditional overlay• 3/4" thick solid maple frame• 2" stiles and rails• 9/16" solid raised center panel• Mortise & Tenon construction• Door has horizontal reverse bevels• Drawer front has horizontal and vertical reverse bevels• Door and drawer front feature rustic styling• Decorative hardware not required
• Full overlay• 3/4" thick solid maple frame• 3" stiles and rails• 9/16" solid raised center panel• Mortise & Tenon construction• Door and drawer front feature rustic styling• Decorative hardware required
10° 2"
3/4"
Door
1"
1"
1"
1"
BASE CABINET
1"
7/8" 7/8" 7/8" 7/8"
10°
3/4"
DrawerFront
WALL CABINET
GRAINDIRECTION
GRAINDIRECTION
GRAINDIRECTION
3/8"
3/16" 3/16"
GRAINDIRECTION
3/8"
3/8"
GRAINDIRECTION
3/8"3/16"3/16"
3/8"
GRAINDIRECTION
3"
3/4"
Door
DrawerFront
3/4"
BASE CABINETWALL CABINET
(Door Style . Specie . Shape)
AX2.MP.B. BTNON .N.NNNN SSS. S .C.B15LHDS
(Drawer Front)(Color & Glaze)
*Designer Series *Designer Series
*Designer Series selections typically requires an additional week in scheduled delivery.
Available Finishes:Espresso (EONON)Harvest (HVNON)Royal (RYNON)
DRAWER FRONT OPTION: SOLID (S)
• Traditional overlay• 3/4" thick solid oak frame• 2 3/16" stiles and rails• 3/16" recessed center panel is "A" face plain sliced oak veneer
with hardwood veneer back• Miter construction permanently joined with steel clamp nails• Door and drawer front have vertical and horizontal reverse bevel• Decorative hardware not required
Available Finishes:Espresso (EONON)Harvest (HVNON)Royal (RYNON)
DRAWER FRONT OPTION: SOLID (S)
• Traditional overlay• 3/4" thick solid oak frame• 2" stiles and rails• 7/16" raised center panel is sliced-cut oak veneer• Mortise & Tenon construction• Door has horizontal reverse bevels• Drawer front has horizontal and reverse bevels• Decorative hardware not required
Available Finishes:Espresso (EONON)Harvest (HVNON)Royal (RYNON)
DRAWER FRONT OPTIONS: 5 PIECE (5) AND SOLID (S)• Full overlay• 3/4" thick solid oak frame• 2 1/2" stiles and rails• 3/16" recessed center panel is "A" face plain sliced oak veneer
Finish codes shown in bold type are available at a premium upcharge 1Designer Series - typically requires an additional week in scheduled delivery
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
14
SINGLE Door (42” hIGh)See Price Book pages 4 and 5.
W942 L or RW1242 L or RW1542 L or RW1842 L or RW2142 L or RW2442 L or R
• One door• Three adjustable shelves• Specify L or R for arched styles
BUTT DoorS (42” hIGh)See Price Book pages 4 and 5.
W2442BW2742BW3042B
DoUBLE Door (42” hIGh)See Price Book pages 4 and 5.
W3342W3642W3942W4242
• Two doors• Three adjustable shelves
WALL ANGLE (42” hIGh)See Price Book pages 4 and 5.
42"
12"
24" 24"
12"
WALL EASy rEACh — DoUBLE Door (42” hIGh)See Price Book pages 4 and 5.
WEZR2442 L or R
• Two piece bi-fold doors• No center mullion• Three adjustable shelves• Concealed 168° hinge• Not available in special depths• Specify L or R for arched styles
42"
42"
42"
BLIND CorNEr — BUTT DoorS (42” hIGh)See Price Book pages 4 and 5.
WBC36/3942B BR or BLWBC39/4242B BR or BLWBC42/4542B BR or BL
• See installation example on page 18
• Specify blind left (BL) or blind right (BR)
• Butt doors• No center mullion• Three adjustable shelves• Order blind panel with 3”
filler WBPF3-42 separately
BLIND CorNEr — SINGLE Door (42” hIGh)See Price Book pages 4 and 5.
WBC24/2742 BR or BLWBC30/3342 BR or BLWBC36/3942 BR or BL
• See installation example on page 18
• Specify blind left (BL) or blind right (BR)
• One door• Three adjustable shelves• Order blind panel with 3” filler
• Butt doors• No center mullion• Three adjustable shelves
12" deepWA2442 L or R
15" deepWA2742 L or R
• One door• Three adjustable shelves• Leave top shelf in cabinet
when installing LS2• Not available in
special depths• Specify L or R for arched
styles• Note: Two revolving shelves
available in kit form (LS2 - Must order separately)
42"
24"27"
24"27"
12"15"
17"
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
CAUTION INSTALLER: Wall Angle cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
CAUTION INSTALLER: Corner wall cabinets require additional support. They should be screwed on both sides to adjacent cabinet, soffit or ceiling joist.
RevolvInG lazy SuSan Shelf KIt (lS2) order separately
LS2
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
15
12”
42”12” 12”
815/16” 815/16”
top view
SINGLE Door (36” hIGh)See Price Book pages 6 and 7.
W936 L or RW1236 L or RW1536 L or RW1836 L or RW2136 L or RW2436 L or R
• One door• Two adjustable shelves• Specify L or R for arched styles
36"
BUTT DoorS (36” hIGh)See Price Book pages 6 and 7.
W2436BW2736BW3036B
• Butt doors• No center mullion• Two adjustable shelves
36"
WALL END CorNEr (42” hIGh)See Price Book pages 6 and 7.
WEC1242
• Two doors• Three adjustable shelves• Not available in special depths
DoUBLE Door (36” hIGh)See Price Book pages 6 and 7.
W3336W3636W3936W4236
• Two doors• Two adjustable shelves
36"
WALL ANGLE (36” hIGh)See Price Book pages 6 and 7.
12” deepWA2436 L or R
15” deepWA2736 L or R
• One door• Two adjustable shelves• Leave top shelf in cabinet
when installing LS2• Not available in special depths• Specify L or R for arched
styles• Note: Two revolving shelves
available in kit form (LS2 - Must order separately)
WALL CorNEr ANGLE (42” hIGh)See Price Book pages 6 and 7.
WCA1242 L or R
• One door• Three adjustable shelves• Not available in special depths• Specify L or R for arched styles
17"
12"12"
top view
12"
17"
42"
36"
12"
24"24"
12"
WALL EASy rEACh — DoUBLE Door (36” hIGh)See Price Book pages 6 and 7.
WA
LL CA
BIN
ETS
24”27”
24”27”
12”15”
17”
36”
WEZR2436 L or R
• Two piece bi-fold doors• No center mullion• Two adjustable shelves• Concealed 168° hinge• Not available in special
depths• Specify L or R for arched
styles
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
CAUTION INSTALLER: Wall Angle cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
CAUTION INSTALLER: Corner wall cabinets require additional support. They should be screwed on both sides to adjacent cabinet, soffit or ceiling joist.
RevolvInG lazy SuSan Shelf KIt (lS2) order separately
17
LS2
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
16
BLIND CorNEr — BUTT DoorS (36” hIGh)See Price Book pages 8 and 9.
WALL CorNEr ANGLE (36” hIGh)See Price Book pages 8 and 9.
12"
17"
36"
17"
12"12"
top view
BLIND CorNEr — SINGLE Door (36” hIGh)See Price Book pages 8 and 9.
WBC24/2736 BR or BL WBC30/3336 BR or BLWBC36/3936 BR or BL
• See installation example on page 18
• Specify blind left (BL) or blind right (BR)
• One door• Two adjustable shelves• Order blind panel with 3"
filler WBPF3-42 separately
WBC36/3936B BR or BLWBC39/4236B BR or BLWBC42/4536B BR or BL
• See installation example on page 18
• Specify blind left (BL) or blind right (BR)
• Butt doors• No center mullion• Two adjustable shelves• Order blind panel with 3"
filler WBPF3-42 separately
WALL END CorNEr (36”hIGh)See Price Book pages 8 and 9.
WEC1236
• Two doors• Two adjustable shelves• Not available in special depths
12"
36"
12" 12"
815/16"
12
815/16"
top view
WA
LL C
AB
INET
S
SINGLE Door (30” hIGh)See Price Book pages 8 and 9.
BUTT DoorS (30” hIGh)See Price Book pages 8 and 9.
DoUBLE Door (30” hIGh)See Price Book pages 8 and 9.
• One door• Two adjustable shelves• Not available in special depths• Specify L or R for arched styles
W930 L or RW1230 L or RW1530 L or RW1830 L or RW2130 L or RW2430 L or R
• One door• Two adjustable shelves• Specify L or R for arched styles
W2430BW2730BW3030B
• Butt doors• No center mullion• Two adjustable shelves
W3330W3630W3930W4230W4530W4830
• Two doors• Two adjustable shelves
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
17
30"
12"
24" 24"
12"
24 3/32"
30"
12"
17"12 3/32"
WALL ANGLE (30” hIGh)See Price Book pages 10 and 11.
PENINSULA WALL ANGLE (30” hIGh)See Price Book pages 10 and 11.
WALL EASy rEACh (30” hIGh)See Price Book pages 10 and 11.
LS2
24"27"
24"27"
12"15"
30"
17"
RevolvInG lazy SuSan Shelf KIt (lS2) order separately
BLIND CorNEr — SINGLE Door (30” hIGh)See Price Book pages 10 and 11.
BLIND CorNEr — BUTT DoorS AND DoUBLE Door (30” hIGh)See Price Book pages 10 and 11.
3"
30"
WBP
F3-3
0
Illustration is blind right
WA
LL CA
BIN
ETSDoUBLE BUTT DoorS (30” hIGh)See Price Book pages 10 and 11.
30"
WBC24/2730 BR or BL WBC30/3330 BR or BLWBC33/3630 BR or BLWBC36/3930 BR or BL
• See installation example on page 18
• Specify blind left (BL) or blind right (BR)
• One door• Two adjustable shelves• Order blind panel with 3”
filler WBPF3-30 separately
WBC36/3930B BR or BLWBC39/4230B BR or BLWBC42/4530B BR or BLWBC48/5130 BR or BL
• See installation example on page 18
• Specify blind left (BL) or blind right (BR)
• Butt doors on WBC36/3930B, WBC39/4230B and
WBC42/4530B cabinets• No center mullion on butt door
cabinets• Two adjustable shelves• Order blind panel with 3"
• Two piece bi-fold doors• No center mullion• Two adjustable shelves• Concealed 168° hinge featured• Not available in special depths• Specify L or R for arched styles
PWA2430 L or RPWA2430B L or R*
• Two doors, one each side • Two adjustable shelves• Not available in special depths• Specify L or R for arched styles* Three doors, butt doors dining
room side, no center mullion• Note: Two revolving shelves
available in kit form (LS2 - Must order separately)
W4830B
• Four doors• Two sets butt doors,
no center mullion• Two adjustable shelves
12" deepWA2430 L or R
15" deepWA2730 L or R
• One door• Two adjustable
shelves• Not available in
special depths• Specify L or R for arched styles• Note: Two revolving shelves
available in kit form (LS2 - Must order separately)
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
CAUTION INSTALLER: Wall Angle cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
CAUTION INSTALLER: Corner wall cabinets require additional support. They should be screwed on both sides to adjacent cabinet, soffit or ceiling joist.
WARNING: Peninsula Wall Cabinets require support every 16” of cabinet
width on both faces of the cabinet. Use #10 or larger screws. Screws should penetrate 1-1/2” minimum into solid wood (ceiling joist or soffit frame)
CAUTION INSTALLER: Corner diagonal wall cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
Din
ing
room
sid
e
top view PWa2430BButt doors
dining room side
top view PWa2430one door
dining room side
Din
ing
room
sid
e
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
18
17"
12"12"
top view
12" 12"
815/16" 815/16"
top view
30"
WALL END CorNEr (30” hIGh)See Price Book pages 12 and 13.
WALL CorNEr ANGLE (30” hIGh)See Price Book pages 12 and 13.
PENINSULA WALL — SINGLE Door (30” hIGh)See Price Book pages 12 and 13.
PENINSULA WALL — BUTT DoorS (30” hIGh)See Price Book pages 12 and 13.
Wall blind corner cabinets provide access to the corner space and permit adjustability of up to 2-7/8" to aid in the kitchen cabinet layout. The blind side corner (area of cabinet hidden by the end of the adjoining cabinet) may be changed from right hand to left hand for square door styles by inverting the cabinet. Arch door styles cannot be inverted. “Pulling” the cabinet away from the cor-ner and using the separately ordered WBPF3-30 or 42 panel/filler accessory provides clearance for opening doors when decorative hardware (pull/knobs) is used.
A
13/16"
3"
WBC Cabinet(Blind Right)
HardwareClearance
B A
3 11/16"
3"
WBC Cabinet(Blind Right)
Hardware Clearance
Wall Blind Corner — No pull
Blind SideWBPF3-30 or 42 WBPF3-30 or 42 Blind Side
Blind SideWBPF3-30 or 42 WBPF3-30 or 42 Blind Side
Adjoining cabinet
Adjoining cabinet
Adjoining cabinet
WEC1230
• Two doors• Two adjustable shelves• Not available in special depths
WCA1230 L or R
• One door• Two adjustable shelves• Not available in special depths• Specify L or R for arched styles
PW1830PW2130PW2430
• 12-3/32" deep (excluding doors)
• Two doors, one door each side
• Two adjustable shelves
• Not available in special depths
PW2430BPW3030B
• 12-3/32" deep (excluding doors)
• Four Doors, two butt doors on each side
• No center mullion• Two adjustable shelves• Not available in
special depths
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
WARNING: Peninsula Wall Cabinets require support every 16” of cabinet
width on both faces of the cabinet. Use #10 or larger screws. Screws should penetrate 1-1/2” minimum into solid wood (ceiling joist or soffit frame)
WARNING: Peninsula Wall Cabinets require support every 16” of cabinet
width on both faces of the cabinet. Use #10 or larger screws. Screws should penetrate 1-1/2” minimum into solid wood (ceiling joist or soffit frame)
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
19
30"
30"
24"
BUTT DoorS AND DoUBLE Door (27” hIGh) See Price Book pages 12 and 13.
W3027B*W3627
PENINSULA WALL — DoUBLE Door (30” hIGh)See Price Book pages 12 and 13.
WALL rEFrIGErATor — 24” DEEP — SINGLE Door
(30” hIGh) See Price Book pages 12 and 13.
WALL rEFrIGErATor — 24” DEEP — BUTT DoorS (30” hIGh) See Price Book pages 12 and 13.
123/32"
top view
27"
SINGLE Door (23 1/2” hIGh)See Price Book pages 14 and 15.
W1824 L or RW2124 L or RW2424 L or R
• One door• One adjustable shelf• Specify L or R for arched styles
23-1/2"
BUTT DoorS (23 1/2” hIGh)See Price Book pages 14 and 15.
W2424BW2724BW3024B
• Butt doors• No center mullion• One adjustable shelf
23-1/2"
DoUBLE Door (23 1/2” hIGh)See Price Book pages 14 and 15.
W3324W3624W3924W4224W4824
• Two doors• One adjustable shelf
23-1/2"
DoUBLE BUTT DoorS (23 1/2” hIGh)See Price Book pages 14 and 15.
W4824B
• Four doors• Two sets butt doors,
no center mullion• One adjustable shelf
23-1/2"
24”
30”
WA
LL CA
BIN
ETS
BLIND CorNEr — SINGLE Door (23 1/2” hIGh)See Price Book pages 14 and 15.
WBC30/3324 BR OR BL
• See installation example on page 18
• Specify blind left (BL) or blind right (BR)
• One door• One adjustable shelf• Order blind panel with 3”
filler WBPF3-30 separately
(A) (B)WBC30/3324-- 30" 327/8"
23-1/2"
3"Illustration is blind right
WB
PF3
-30
• Two doors• One adjustable shelf* Butt doors, no center mullion
WR2430BWR2730BWR3030B
• Butt doors• No center mullion• Two adjustable shelves• Not available in special depths
WR1830 L or RWR2430 L or R
• One door• Two adjustable shelves• Specify L or R for arched styles• Not available in special depths
PW3630
• 12-3/32 deep (excluding doors)
• Four doors, two each side
• Two adjustable shelves
• Not available in special depths
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
WARNING: Peninsula Wall Cabinets require support every 16” of cabinet
width on both faces of the cabinet. Use #10 or larger screws. Screws should penetrate 1-1/2” minimum into solid wood (ceiling joist or soffit frame)
CAUTION INSTALLER: 24” deep wall cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
CAUTION INSTALLER: 24” deep wall cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
20
20-1/2"
23-1/2"
24"
23-1/2"
24"
top view
12-3/32"
DoUBLE Door (18” hIGh)See Price Book pages 16 and 17.
W3018W3318W3618W3918
W4218W4818
• Two doors• No shelf
18"
WR3324WR3624WR3924
• Two doors• One adjustable shelf• Not available in
special depths
PENINSULA WALL — BUTT DoorS (23 1/2” hIGh)See Price Book pages 14 and 15.
PW2424BPW3024B
PENINSULA WALL — DoUBLE Door (23 1/2” hIGh)See Price Book pages 14 and 15.
PW3624
• 12-3/32 deep (exclud-ing doors)
• Four doors, butt doors on each side
• One adjustable shelf• Not available in special
depths
WALL rEFrIGErATor — 24” DEEP — SINGLE Door(23 1/2” hIGh) See Price Book pages 16 and 17.
23-1/2"
1
23-1/2"
top view
12-3/32"
23 1/2"
24"
• 12-3/32 deep (excluding doors)
• Four doors, butt doors on each side
• No center mullion• One adjustable shelf• Not available in special
depths
WALL rEFrIGErATor — 24” DEEP — DoUBLE Door(23 1/2” hIGh) See Price Book pages 16 and 17.
WA
LL C
AB
INET
S
BUTT DoorS (18” hIGh)See Price Book pages 16 and 17.
W2418B
• Butt doors• No center mullion• No shelf
DoUBLE Door (20 1/2” hIGh)See Price Book pages 16 and 17.
W3021W3621
• Two doors• No shelf
SINGLE Door (18” hIGh)See Price Book pages 16 and 17.
W1818 L or RW2418 L or R
• One door• No shelf• Specify L or R for arched styles
18"
18"
WALL rEFrIGErATor — 24” DEEP — BUTT DoorS(23 1/2” hIGh) See Price Book pages 16 and 17.
12-3/32"
top view
PENINSULA WALL — SINGLE Door (23 1/2” hIGh)See Price Book pages 14 and 15.
PW1824PW2124PW2424
• 12-3/32" deep (excluding doors)
• Two doors• One adjustable shelf• Not available in
special depths
23-1/2"
WR2424BWR2724BWR3024B
• Butt doors• No center mullion• One adjustable shelf• Not available in
special depths
WR1824 L or RWR2424 L or R
• One door• One adjustable shelf• Specify L or R for arched styles• Not available in special depths
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
WARNING: Peninsula Wall Cabinets require support every 16” of cabinet
width on both faces of the cabinet. Use #10 or larger screws. Screws should penetrate 1-1/2” minimum into solid wood (ceiling joist or soffit frame)
WARNING: Peninsula Wall Cabinets require support every 16” of cabinet
width on both faces of the cabinet. Use #10 or larger screws. Screws should penetrate 1-1/2” minimum into solid wood (ceiling joist or soffit frame)
WARNING: Peninsula Wall Cabinets require support every 16” of cabinet
width on both faces of the cabinet. Use #10 or larger screws. Screws should penetrate 1-1/2” minimum into solid wood (ceiling joist or soffit frame)
CAUTION INSTALLER: 24” deep wall cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
CAUTION INSTALLER: 24” deep wall cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
CAUTION INSTALLER: 24” deep wall cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
21
18"
24"
BLIND CorNEr — SINGLE Door (18” hIGh)See Price Book pages 18 and 19.
WBC30/3318 BR or BL
• See installation example on page 18
• Specify blind left (BL) or blind right (BR)
• One door• No Shelf• Order blind panel with 3”
filler WBPF3-30 separately
WALL rEFrIGErATor — 24” DEEP — DoUBLE Door (15” hIGh)See Price Book pages 18 and 19.
WR3015WR3315WR3615WR3915
• Two doors• No shelf• Not available in special depths
15"
24"
BUTT DoorS AND DoUBLE Door (12” hIGh)See Price Book pages 18 and 19.
W2712B*W3012W3612W3912W4812**
* Butt doors, not center mullion** Three doors; sections are 15”, 18”, 15”
12"
WALL rEFrIGErATor — 24” DEEP — DoUBLE Door (18” hIGh)See Price Book pages 18 and 19.
DoUBLE BUTT DoorS (18” hIGh)See Price Book pages 16 and 17.
WR3318WR3618WR3918
• Two doors• No Shelf• Not available in special depths
W4818B
• Four doors• Two sets butt doors,
no center mullion• No shelf
18"
18"
3"
WBP
F3-3
0
Illustration is blind right
21"
18-3/4"
30"12"
16"
28-1/2"
18"
MICroWAvE ShELF (21” hIGh)See Price Book pages 20 and 21.
WMS302118
• 18" deep shelf• Wood veneer• Not available in special
depths
WA
LL CA
BIN
ETS
PENINSULA WALL — DoUBLE Door (18” hIGh)See Price Book pages 18 and 19.
PW3018PW3618
• 12-3/32" deep (excluding doors)
• Four doors, two doors each side
• No shelf• Not available in
special depths
18"
BUTT DoorS AND DoUBLE Door (15” hIGh)See Price Book pages 18 and 19.
W2715B*W3015W3315W3615W3915
• Two doors• No shelf* Butt doors, no center mullion
15"
(A) (B)WBC30/3318-- 30" 327/8"
12-3/32"
top view
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
CAUTION INSTALLER: 24” deep wall cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
CAUTION INSTALLER: 24” deep wall cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
WARNING: Peninsula Wall Cabinets require support every 16” of cabinet
width on both faces of the cabinet. Use #10 or larger screws. Screws should penetrate 1-1/2” minimum into solid wood (ceiling joist or soffit frame)
WALL CABINETS (12” DEEP)All single door wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched styles.
22
18"
15"18"23 1/2"
WALL ChINA DISPLAy (18” hIGh)See Price Book pages 20 and 21.
WALL LATTICE WINE rACk (15”, 18” or 23 1/2” hIGh)See Price Book pages 20 and 21.
WL3615 13WL3915 13WL3018 11WL3024 17
• Interior color matches exterior
• Not available in special depths• For use in horizontal applications only• 4" x 4" bottle openings• Lattice is not removable
Bottle Capacity
WA
LL C
AB
INET
S
18"
36"15"
MICroWAvE CABINET TrIMMABLE (36” hIGh)See Price Book pages 20 and 21.
WMC2736Bopening size: trimmable to:
WMC3036Bopening size: trimmable to:
• Butt doors, no center mullion• 18” Deep• Special depth available in 21”
or 24” deep• Trimmable face frame• Interior color matches exterior
color• 4-1/2" wide face frame stiles• Doors are attached with face-
mounted concealed hinges• No adjustable shelf in upper
section
MICroWAvE ShELF CABINET BUTT DoorS AND DoUBLE Door (30”, 36” or 42” hIGh)See Price Book pages 20 and 21.
WMSC2730B*WMSC2736B*WMSC3030WMSC3036WMSC3042
18" 24" or 27"
12"
30"12"
30"36"42"
• Designed for “countertop” style microwave ovens
• Two doors• No adjustable shelf in upper section• Interior color matches exterior color• Matching 3/4" thick veneer microwave shelf extends 6-25/32"
beyond face frame. Shipped unattached for easier cabinet instal-lation. Shelf mounting hardware included.
• Not available in special depths• Oven opening dimensions
WMSC2730B - 24" wide x 18" deep (shelf) x 15-3/4" high WMSC2736B - 24" wide x 18" deep (shelf) x 18-3/4” high WMSC3030 - 27" wide x 18" deep (shelf) x 15-3/4" high WMSC3036 - 27" wide x 18" deep (shelf) x 18-3/4" high WMSC3042 - 27" wide x 18" deep (shelf) x 21-3/4" high
* Butt doors, no center mullion• Note: For Cashmere, Snowdrift and Starlight finish, the 3/4" thick
wide, 14-1/2” high, 11-1/4” deep• Not available in special depths
High Wide13" x 18"19-1/2" x 24"
CAUTION INSTALLER: Do not install wall cabinet by itself. Additional support is required, such as attachment to a soffit. See cabinet installation guide for specific instructions.
CAUTION INSTALLER: WMSC cabinets require additional support. They should be screwed on both sides to adjacent cabinets, soffit or ceiling joist.
CAUTION INSTALLER: 18", 21" and 24" deep wall cabinets require additional support. They should be screwed on both sides to adjacent cabinet, wall, soffit or ceiling joist.
High Wide13" x 21"19-1/2" x 27"
12"
15"18"23-1/2"
15" HIGH 18" HIGH 23-1/2" HIGHBK3615 BK3018 BK3624*BK3915 BK3618
• Bookcases have matching interiors
• No shelf • Available in special depths, see page 59* One adjustable 3/4" thick shelf. Plastic shelf supports
used during shipping. Clear shelf supports are provided.
42"
23
12"
48"
12"
96"84"
24" 24"
15"
30"
BookCASES (12” Deep)CABINET INTERIOR COLOR MATCHES EXTERIOR. Doors, if required, must be ordered separately. Unfinished bookcases are not available.
BookCASE† (60” hIGh)See Price Book pages 22 and 23.
BK1560BK1860BK2160BK2460BK3060BK3660
• Three adjustable 3/4” thick shelves • Bookcases have matching interiors• Plastic shelf supports used during
shipping• Clear shelf supports are provided• Bottom shelf is fixed• Available in special depths,
see page 59
12"
60"
18"
BookCASE† (48” hIGh)See Price Book pages 22 and 23.
BK1548 BK2448BK1848 BK3048BK2148 BK3648
• Three adjustable 3/4” thick shelves • Bookcases have matching interiors• Plastic shelf supports used during
shipping• Clear shelf supports are
provided• Available in special depths,
see page 59
BookCASE† (96” or 84” hIGh)See Price Book pages 22 and 23.
96” HIGHBK1596BK1896BK2196BK2496BK3096BK3696
84” HIGHBK1584 BK1884 BK2184 BK2484 BK3084 BK3684
• Five adjustable 3/4” thick shelves • Bookcases have matching interiors• Clear shelf supports are provided• Plastic shelf supports used during shipping• Toe kicks platform on 96" bookcases ships unattached• Available in special depths, see page 59
BookCASE† PENINSULA WALL ANGLE (30” hIGh)See Price Book pages 24 and 25.
BKPWA2430
• Cabinet has door opening on dining side
• Two adjustable 3/4” thick shelves • Bookcases have matching interiors• Plastic shelf supports used during
shipping• Clear shelf supports are provided• Not available in special depths
BookCASE† (36” hIGh)See Price Book pages 22 and 23.
BK3636
• Two adjustable 3/4” thick shelves • Bookcases have matching interiors• Plastic shelf supports used during
shipping• Clear shelf supports are provided• Available in special depths, see
page 59
36"
BookCASE† (42” hIGh)See Price Book pages 22 and 23.
BK3642
• Three adjustable 3/4” thick shelves
• Bookcases have matching interiors• Plastic shelf supports used during
shipping• Clear shelf supports are provided• Available in special depths, see
page 59
BookCASE† (15”, 18” or 23 1/2” hIGh)See Price Book pages 24 and 25.
BookCASE† (30” hIGh)See Price Book pages 24 and 25.
BK3630
• Two adjustable 3/4” thick shelves • Bookcases have matching interiors• Plastic shelf supports used during
shipping• Clear shelf supports are provided• Available in special depths,
see page 59
30"
Bo
ok
CA
SES
BookCASE (Bk) WArNING†
Bookcase cabinets may be subjected to extreme weight. Do not install cabinet by itself. Additional support is required, such as attachment to a soffit or countertop. See cabinet installation guide for specific instructions. SPECIAL DEPTh BookCASE (Bk) WArNING†: Special depth Bookcase cabinets greater than 12”deep should not be used
in wall hung applications. Wall hung applications must be limited to 15 lbs. per square foot of shelf area, not to exceed 50 lbs. per shelf. FAILURE TO FOLLOW THESE LIMITATIONS COULD CAUSE CABINET TO FALL, RESULTING IN SERIOUS INJURY.
24
34-½"
34-½"
24"
34-½"
B9FH L or R
• Specify L or R hinging• No shelf• One full-height door
B24B HDS B27B HDSB30B HDS
• Butt doors• One drawer• No center mullion• Adjustable shelf
34-1/2"
34-½"
BPO9
• One full-height door• Full extension guides,
100# rated• Four shelves, three
adjustable• Not available in special depths
BASE — FULL-hEIGhT — SINGLE DoorSee Price Book pages 26 and 27.
BASE — BUTT DoorSSee Price Book pages 26 and 27.
BASE PULL oUTSee Price Book pages 26 and 27.
BASE WASTEBASkET ToP MoUNT See Price Book pages 28 and 29.
BASE CABINETS (24” Deep, 34-1/2” high)Specify Left or Right hinging for single door cabinets.
BA
SE
CA
BIN
ETS
B12 L or R HDSB15 L or R HDSB18 L or R HDSB21 L or R HDSB24 L or R HDS
• Specify L or R hinging• One door• One drawer• Adjustable shelf
BASE — SINGLE DoorSee Price Book pages 26 and 27.
BASE — BUTT DoorS AND DoUBLE DoorSee Price Book pages 26 and 27.
• Three drawers; one standard and two deep• Not available in 12” and 15” reduced depth* Full extension undermount drawer guides on two bottom deep drawers. Standard sidemount 3/4 extension guides will be used on 18” deep option
34-½"
BASE DrAWEr — 3 DrAWErSee Price Book pages 26 and 27.
34-½"
BASE DrAWEr — 4 DrAWErSee Price Book pages 26 and 27.
BWBT15BWBT18
• One top drawer• Top mounted veneered
hardwood wastebasket tray assembly with full-extension ball-bearing guides
• Door is attached to tray assembly
• 35 qt. white plastic basket is 10-1/2” x 14-5/8” x 18” high• Not available in special
depths
BWBT15• One removable 35 qt. white
plastic basket• One 5-1/2” deep white plastic
tray for garbage bag storage
BWBT18• Two removable 35 qt. white
plastic baskets (no garbage bag tray storage)
BASE — DoUBLE DoorSee Price Book pages 26 and 27.
B33 HDSB36 HDSB39 HDS
• Two doors• One drawer• Adjustable shelf
B42 HDSB45 HDSB48 HDSB48B HDS*
• Two doors• Two drawers• Adjustable shelf* Four doors, two pairs butt doors, no center mullion, two drawers
BD12-4DBD15-4DBD18-4DBD21-4DBD24-4D
• Four drawers; three standard and one deep
• Not available in 12” and 15” reduced depth
34-½"
18"
34- 1/2"
24"
BWBt18 Shown
15"
34-1/2"
24"
BWBt15 Shown
Plastic tray
25
SB24B*SB27B*SB30B*SB33SB36SB39
• Two doors• One false front• No shelf* Butt doors, no center mullion
34-1/2"34-1/2"
34-1/2"
24"
34 1/2"
34-1/2"
BASE CABINETS (24” Deep, 34-1/2” high)Specify Left or Right hinging for single door cabinets.
34-½"
BASE SINGLE Door — oNE STANDArD TrAySee Price Book pages 28 and 29.
B12 L or R H1TB15 L or R H1TB18 L or R H1TB21 L or R H1TB24 L or R H1T
• Specify L or R hinging• One door• One drawer• One adjustable shelf • One pull out tray• Not available in special depths
34-1/2"B24B H1FB27B H1FB30B H1F
• Butt doors • No center mullion• One drawer• One adjustable shelf • One pull out tray• Not available in special depths
BASE BUTT DoorS — oNE STANDArD TrAySee Price Book pages 28 and 29.
BA
SE C
AB
INETS
34 1/2"
BUTT DoorS — TWo roLL oUT TrAySSee Price Book pages 28 and 29.
ROB30B 2FTROB36B 2FT
• Butt doors• No center mullion• One drawer• Two roll out trays• Not available in special depths
BASE — FULL-hEIGhT SINGLE DoorSee Price Book pages 28 and 29.
B12FH L or R HDSB15FH L or R HDSB18FH L or R HDSB21FH L or R HDSB24FH L or R HDS
• Specify L or R hinging• One full-height door• Adjustable shelf
BASE — FULL-hEIGhT BUTT DoorSSee Price Book pages 28 and 29.
B24BFH HDSB27BFH HDSB30BFH HDS
• Butt doors full-height• No center mullion• Adjustable shelf
BASE — FULL-hEIGhT DoUBLE DoorSee Price Book pages 28 and 29.
• Two full-height doors• Adjustable shelf• Center mullion* Four doors, two sets butt doors, no center mullion
SINk BASE — SINGLE DoorSee Price Book pages 30 and 31.
SB21 L or RSB24 L or R
• Specify L or R hinging• One door• One false front• No shelf
34-1/2"
SINk BASE — BUTT DoorS AND DoUBLE DoorSee Price Book pages 30 and 31.
BASE MICroWAvE CABINET — DEEP BoTToM DrAWErSee Price Book pages 28 and 29.
BMC27Opening Size:15-7/8" high x 24" wide
• Deep bottom drawer• Full extension sidemount ball
bearing guides• Designed for “counter” style micro-
waves• Interior color matches exterior color• Special depth available in 21” deep• Shelf is recessed 3/16" from
face frame in front of where the microwave will sit
26
BASE CABINETS (24” Deep, 34-1/2” high)Specify Left or Right hinging for single door cabinets.
SF24 L or RSF24B*SF27B*SF30B*SF36**SF42***
• SF24 Single door, one false front• SF24 specify L or R hinging• Floor not included, order separately• Toe kick shipped ready to assemble* SF24B, SF27B and SF30B two butt doors, no center mullion, one false front**SF36 Two doors, one false front***SF42 Two doors, two false fronts
36" or 42"
36"or 42" 291/8"
187/8" 24"
24"
17"or
251/2"
SINk BASESee Price Book pages 30 and 31.
SBC54B*SBC60**
• Four doors • Two drawers • One false front • No shelf * Butt doors, two drawers and one false front** Actual cabinet width of SBC60 is 59-1/2" and frame stiles extended so cabinet is trimmable by 1/2" each side
AB
C
34-1/2"
A B CSBC54B 12” 30” 12”SBC60 15” 28-3/4” 15”
Cabinet face dimensions:
36" 36"
BASE LAZy SUSAN TrADITIoNAL ovErLAy Door STyLESSee Price Book pages 32 and 33.
BLS36
• Two 28” diameter high impact white plastic pie-cut shelves
• Shelves are attached to doors which all rotate as a unit
• Shelf load capacity rating is 15 lbs. per sq. ft., not to exceed 50 lbs.
• Requires 36” x 36” of wall space• Use BEPF3 if either end is
exposed (requires 3” of space). Order separately
• Not available in special depths• Available in Traditional Overlay
door styles only
24"
341/2"
30" or 36”
DEEP SINk BASESee Price Book pages 30 and 31.
DSB30 DSB36
• Two doors• No shelf• Maximum Trimmable Opening
27" x 9-1/2" 33" x 9-1/2"
34-1/2"
SINk FroNT SINGLE — BUTT DoorS AND DoUBLE DoorSee Price Book pages 30 and 31.
39"or 42" 39"or 42"SINk FroNT ANGLESee Price Book pages 32 and 33.
Wall SpaceSFA36 L or R 36” x 36”SFA39 L or R 39” x 39”SFA42 L or R 42” x 42”
• Specify L or R hinging• One door• One false front• CANNOT BE TRIMMED• SFDB4242 floor bottom
panel not included, order separately
• Includes toe space (toe kick backer) assembly. Shipped unattached
SINk BASE ANGLESee Price Book pages 30 and 31.
SBA36 L or RSBA42 L or R
• Specify L or R hinging• One door• One false front• No shelf• SBA36 requires 36” x 36” of wall space• SBA42 requires 42” x 42” of wall space• Top panel must be cut in field to
required for delivery with cabinet door and false front removed• Use BEPF3 if either end is exposed
(requires 3” of space). Order separately• Not available in special depths
BA
SE
CA
BIN
ETS
Sf36 Shown
34-1/2"
SINk BASE — BUTT DoorS AND DoUBLE DoorSee Price Book pages 30 and 31.
SB42SB45SB48SB48B*
• Two doors• Two false fronts• No shelf* Four doors, two sets butt
doors, no center mullion
SINk FroNT BoTToMSee Price Book pages 32 and 33.
Depth x WidthSFB2348 23-3/16” x 48”SFB2372 23-3/16” x 72”SFDB4242* 42-3/16” x 42-3/16”
• Available in Natural Maple or Starlight
• 3/8” engineered wood, laminate one side
• One per carton* Fits SFA42 without trimming
27
BCR36 L or R
• Specify L or R hinging• Available in full overlay door styles• Two piece bi-fold doors• Doors are mounted with 168°,
3-way adjustable hinges• Equipped with 2-28” kidney shelves that rotate independent of doors• Requires 36” x 36” wall space• Not available in special depths• Use BEPF3 if either end is exposed (requires 3” of space). Order separately.
BAR36 L or R
• Specify L or R hinging• One door• Two 28” diameter rotating
shelves• Requires 36” x 36” wall
space• Use BEPF3 when end of
the cabinet is exposed, order separately
• Not available in special depths• Doorway clearance of 29-1/4” minimum required for delivery
BCRB33 L or RBCRB36 L or R
• Specify L or R hinging• Two piece bi-fold doors• Bi-fold doors with independent
adjustment hinged to cabinet face frame• Features concealed hinges with 168° opening angle• Two 24” diameter rotating high impact
white plastic pie-cut shelves. Shelves rotate independently of bi-fold doors and each other
• Shelf load capacity rating is 15 lbs. per square foot, not to exceed 50 lbs.
• BCRB33 Requires 33” x 33” wall space• BCRB36 Requires 36” x 36” wall space• Not available in special depths• Use BEPF3 if either end is exposed (requires 3” of space). Order separately.
36" 36"
34-1/2"
BASE CorNEr rEvoLvING — WooD LAZy SUSANSee Price Book pages 32 and 33.
BCR36WLS L or R
• Specify L or R hinging• Two piece bi-fold doors• Concealed 168° hinge featured• Equipped with two 32” revolving
wood trays• Requires 36” x 36” of wall space• Use BEPF3 when end of cabinet is
exposed, order separately• Not available in special depths
36" 36"
17"
34½"
BASE ANGLE rEvoLvINGSee Price Book pages 32 and 33.
BASE CorNEr rEvoLvING — BUILDErSee Price Book pages 32 and 33.
BASE CorNEr rEvoLvING — FULL ovErLAy Door STyLESSee Price Book pages 32 and 33.
BASE BLIND CorNErSee Price Book pages 34 and 35.
BBC39/42 BR or BL HDSBBC42/45 BR or BL HDSBBC45/48 BR or BL HDSBBC48/51 BR or BL HDS
• Specify blind left (BL) or blind right (BR)
• One door• One drawer• Door is hinged from
face frame center stile• One full width half-depth
adjustable shelf• Order blind panel with
3” filler BBPF3 separately• Door and drawer hardware clearance:
No Pull = 1 5/8"2 7/8" pull = 4 1/2"
36" 36"
BASE CorNEr FIXED ShELFSee Price Book pages 32 and 33.
BA
SE C
AB
INETS
INSTALLATIoN EXAMPLE BASE BLIND CorNEr
Base Blind Corner cabinets provide access to corner space and permit adjust-ability of up to 2-7/8” to aid in kitchen layout. The blind side corner (area of cabinet hidden by end of adjoining cabinet) must be ordered Blind Left (BL) or Blind Right (BR). “Pulling” the cabinet away from the corner (adding up to an additional 2-7/8” to the void area), and using the separately ordered BBPF3 panel/filler assembly provides clearance for opening doors and drawers when decorative hardware (pulls/knobs) is used.
(WS) (C) (V) Door Wall Space Actual Void Area Opening Base Blind Corner No Pull 2-7/8” Pull Cabinet Width No Pull 2-7/8” Width
BBC39/42 39” 41-7/8” 30” 9” 11-7/8” 10-1/2”
BBC42/45 42” 44-7/8” 36” 6” 8-7/8” 13-1/2”
BBC45/48 45” 47-7/8” 42” 3” 5-7/8” 16-1/2”
BBC48/51 48” 50-7/8” 48” 0” 2-7/8” 19-1/2”
Base Blind Corner — No pull Base Blind Corner — 2 7/8" pullCabinet not to be pulled more
than 2 7/8" from corner.
C V
WS
BBC Cabinet
(Blind Right)
Blind Side
Adjoining cabinet
BBPF3
WSC V
BBC Cabinet
(Blind Right)
Blind Side
Adjoining cabinet
BBPF3
NOTE: If cabinet is installed next to an appliance deeper than 25”, it may interfere with cabi-net door when opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front (pulling cabinet will result in a deeper countertop and overall base cabinet depth dimension).
34-½"
BBPF
3
3"Illustration is blind right
BASE CABINETS (24” Deep, 34-1/2” high)Specify Left or Right hinging for single door cabinets.
BCFS36 L or R
• Specify L or R hinging• Bi-fold doors with independent
adjustment hinged to cabinet face frame• Features concealed hinges
with 168˚ opening angle• One fixed pie-cut shelf in center position• Requires 36” x 36” of wall space• Use BEPF3 if either end is exposed
(requires 3” of space). Order separately• Not available in special depths
NOTE: If cabinet is installed next to an appliance deeper than 25”, it may interfere with cabi-net door when opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front (pulling cabinet will result in a deeper countertop and overall base cabinet depth dimension).
NOTE: If cabinet is installed next to an appliance deeper than 25”, it may interfere with cabi-net door when opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front (pulling cabinet will result in a deeper countertop and overall base cabinet depth dimension).
36" 36"
28
24"
34-1/2"
top view
24-7/32"
PENINSULA BASE — BUTT DoorS AND DoUBLE Door See Price Book pages 34 and 35.
BASE END CorNErSee Price Book pages 34 and 35.
34-1/2"
PENINSULA BASE — BUTT DoorSee Price Book pages 34 and 35.
24"
34-½"
BCA24BFH
• For use at L or R end of cabinet run or as a “standalone” in a corner
• Two full-height butt doors, no center mullion
• One adjustable shelf• Not available in special depths
BASE CorNEr ANGLE — BUTT DoorSSee Price Book pages 34 and 35.
BASE END ANGLESee Price Book pages 34 and 35.
BEA12FHLBEA12FHR
• One door• Order BEA12FHL for left end
of run, order BEA12FHR for right end of run
• Two adjustable shelves• Not available in special
depths• Cannot specify hinging
BA
SE
CA
BIN
ETS
24"
24"
34"
top view
34-1/2"
PENINSULA BASE — SINGLE DoorSee Price Book pages 34 and 35.
12"24"
12"
341/2"
Bea12fhl Shown
34-1/2"
42” and 48” Shown 12"
12"24"
17"
45°
BASE CABINETS (24” Deep, 34-1/2” high)Specify Left or Right hinging for single door cabinets.
PB18 FDSPB24 FDS
• Door hinged left on drawer side, hinged right side with false front
• Two doors, one each side• One drawer one side• False front one side• 24 7/32” deep (excluding door
and drawer fronts)• Full-depth adjustable shelf• Not available in special depths
Note: It is not recommended to use Peninsula Base cabinets in island applications. Failure to follow this limitation could cause serious injury and will void the product warranty.
BEC24FH
• For use at L or R end of cabinet run or as a "standalone" in a corner
• Two full-height doors• One adjustable shelf• Requires 24” x 24” space• Not available in special depths
PB24B FDSPB30B FDS
• Butt doors each side, no center mullion
• One drawer one side• False front one side• Full-depth adjustable shelf• 24 7/32” deep (excluding door
and drawer fronts)• Not available in special depths
Note: It is not recommended to use Peninsula Base cabinets in island applications. Failure to follow this limitation could cause serious injury and will void the product warranty.
24-7/32"34-1
top view
PB36 FDS*PB42 FDSPB48 FDSPB48B FDS**
• Two doors each side • Two drawers one side• Two false fronts one side• Full-depth adjustable shelf• Not available in special depths• 24 7/32” deep (excluding door
and drawer fronts)* One drawer one side, one false
front one side** Butt doors each side
Note: It is not recommended to use Peninsula Base cabinets in island applications. Failure to follow this limitation could cause serious injury and will void the product warranty.
top view
24-7/32"
24"
24"22-1 /2"
17-7/8"
17-7/8"
63.5°
top view
top view
29
UBLS36
• Two 28” diameter high impact white plastic pie-cut shelves
• Shelves are attached to doors which rotate as a unit
• Shelf load capacity rating is 15 lbs. per sq. ft., not to exceed 50 lbs.
• Requires 36” x 36” of wall space• Not available in special depths• Use BEPF3 if either end is exposed (requires 3” of space.)
Must be field trimmed to 32-1/2” high. Order separately• Available in traditional overlay door styles only
5 1/2"
*2-25/32
5-1/2"
*2-25/32"
32-1/2"
32-1/2"
5-1/2"*2- 25/32"
UNIvErSAL CABINETS (24” Deep, 32-1/2” high)Specify Left or Right hinging for single door cabinets.
UN
IvEr
SA
L CA
BIN
ETS
5-1/2"
*2- 25/32"
32-1/2"
5 1/2"
*2-25/32"
32-1/2"
UNIvErSAL BASE — SINGLE DoorSee Price Book pages 36 and 37.
UB12 L or R UB15 L or RUB18 L or R UB21 L or RUB24 L or R
• Specify L or R hinging• One door• One drawer• No shelf
UNIvErSAL BASE — BUTT DoorSSee Price Book pages 36 and 37.
UB24BUB27B
• Butt doors• No center mullion• One drawer• No shelf
UNIvErSAL BASE — DoUBLE DoorSee Price Book pages 36 and 37.
UB30UB36UB42*
• Two doors• One drawer• No Shelf* Two drawers
32-1/2"
*2- 25/32"5-1/2"
UNIvErSAL BASE — FULL-hEIGhT SINGLE DoorSee Price Book pages 36 and 37.
UB9FH L OR R*UB24FH L OR R HDS
• Specify L or R hinging• One full-height door• One adjustable shelf* No Shelf
*2- 25/32"5-1/2"
32-1/2"
UNIvErSAL BASE — FULL-hEIGhT BUTT DoorSSee Price Book pages 36 and 37.
UB24BFH HDS
• Two full-height butt doors• No center mullion• One adjustable shelf
UNIvErSAL BASE DrAWEr — 3 DrAWErSee Price Book pages 36 and 37.
UBD12-3DUBD15-3DUBD18-3DUBD21-3DUBD24-3D
• Three drawers, one standard and two deep• Not available in 12” and 15” reduced depth
27"
UNIvErSAL BASE SINk FroNT — FULL-hEIGhT DoUBLE DoorSee Price Book pages 38 and 39.
UBSF36FH
• Two full-height doors-• Toe kick not included• Not trimmable
UB30FH HDSUB33FH HDSUB36FH HDS
• Two full-height doors• One adjustable shelf
UNIvErSAL BASE — FULL-hEIGhT DoUBLE DoorSee Price Book pages 36 and 37.
UNIvErSAL BASE LAZy SUSAN — TrADITIoNAL ovErLAy Door STyLESSee Price Book pages 38 and 39.
UNIvErSAL SINk FroNT CABINET kITSee Price Book pages 38 and 39
USFCK30FHUSFCK33FHUSFCK36FHUSFCK42FH
• Two full-height doors• Face frame with center mullion• Includes toe space (toe kick backer)
assembly. Shipped unattached• Includes bottom panel made of 3/8” thick
engineered wood, laminate one side. Shipped separately.
* Not including toekick cover (TkCUL8)
UNIvErSAL BASE CorNEr rEvoLvING — FULL ovErLAy Door STyLESSee Price Book pages 38 and 39.
32-1/2"
5-1/2"
*2- 25/32"
5-1/2"
*2-25/32"
32-1/2"
24" Shown
36" Shown
CAUTION INSTALLER: If cabinet is installed next to an appliance deeper than 25”, it may interfere with cabinet door when opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front (pulling cabinet will result in a deeper countertop and over-all base cabinet depth dimension).
UBCR36 L or R
• Specify L or R hinging• Two piece bi-fold doors• Doors are mounted with 168˚,
3 way adjustable hinges• Equipped with 2-28” kidney shelves• Requires 36” x 36” wall space• Not available in special depths• Available in full overlay door styles
only• Use BEPF3 when exposed at end of
run, order separately• Doors with center hinges swing out and are not attached to shelves
36" 36"
5-1/2"
30
TALL CABINETS (84”, 90” & 96” high)Specify Left or Right hinging for single door cabinets.
ovEN CABINET UNIvErSAL — 24” DEEP (84”, 90”, & 96” hIGh)See Price Book pages 40 and 41.
OCU2784BOCU3084BOCU3384
OCU2790BOCU3090BOCU3390
OCU2796BOCU3096BOCU3396
• Two doors on upper section• 27” and 30” wide cabinets have butt doors, no center mullion• Face-mounted door hinges are used for proper face frame reveal• Three full-width standard height drawer openings at cabinet bottom• Includes one full-width standard height drawer • Order additional drawer(s) as required. See ODK (Oven Drawer Kit)• 96” tall cabinets have two adjustable shelves in upper section• 90” tall cabinets have one adjustable shelves in upper section• 84” tall cabinets have no shelf in upper section• Fixed shelf between upper and oven center section• Center section accommodates both single and double ovens
by trimming/removing horizontal cross rails from face frame.• 3” wide trimmable vertical face frame stiles• Oven support platform NOT included. Order OCSP separately• 96” tall cabinets include a toekick platform shipped unattached
for easier handling and installation. Toekick cover required on exposed sides of platform
• Not available in special depths
ovEN CABINET SUPPorT PLATForMSee Price Book pages 40 and 41.
OCSP27OCSP30OCSP33
• Field installed• Supports oven unit in
OCU cabinets• 1-1/8” thick engineered wood
unfinished on all surfaces• Includes mounting brackets
and screws• One per carton
TALL
CA
BIN
ETS
ovEN DrAWEr kITSee Price Book pages 40 and 41.
ODK27ODK30ODK33
• Field installed• Provides additional storage when a
single or compact double oven is used• A maximum of two additional drawers
can be added to OCU• Kit includes drawer front, drawer core,
guides and mounting hardware• One drawer per kit
DoUBLE ovEN CABINET kITSee Price Book pages 40 and 41.
DOCK27DOCK30DOCK33
• Designed to provide additional support for a combination microwave oven and built-in oven installation• Includes one OCSP to support the microwave oven. This includes an engineered wood platform and mounting hardware which install into pre- drilled cabinet end panel holes• Includes a field installed 3” wide face frame rail to divide the two openings. Installation cleat attached Divider rail sizes: DOCK27 - 3/4” x 3” x 21” long DOCK30 - 3/4” x 3” x 24” long DOCK33 - 3/4” x 3” x 27” long• Specify wood species and finish for divider rail• Requires a second OCSP platform to support the built-in oven for a combination design. Order the second OCSP platform separately
2 " (OCS 2 __)
" CS 2 B
Maximum Opening25" (OCU27__B)28" (OCU 30__B)31" (OCU 33__)
Maximum Opening25 OCU27 B)28" (OCU 0 B)31" (OCU 33 )
abin t Wid h27" (O S 27 )
WARNING: Self-cleaning ovens are cleaned through the use of intense heat. If the heat gasket does not seal properly, heat may escape from the oven. Cabinet components installed near the oven may suffer finish or surface damage. To minimize the risk of damage during cleaning cycles, we recommend that you open doors and drawers from cabinets that are above and adjacent to a self-cleaning oven.
31
TALL CABINETS (84”, 90” & 96” high)Specify Left or Right hinging for single door cabinets.
PANTry CABINET — 24” DEEP (84”, 90”, & 96” hIGh)See Price Book pages 40 and 41.
PC3684BPC3690BPC3696B
• Four doors• Butt doors, no center mullion in lower section• Butt doors with center mullion in upper section• Not available in special depths• 84” tall cabinets have no shelves in upper section• 90” tall cabinets have 1 shelf in upper section• 96” tall cabinets have 2 shelves in upper section• No shelves in lower section. Order separately• For arch door styles, only doors on upper
section will be arch• 1” wide center partition runs full-height
in bottom section• Bottom section has pre-drilled end panels
for adjustable shelves (order separately)• Tray kits not available• 96” cabinets include toekick platform, shipped unat-
tached for easier handling and installation. Toekick cover required on exposed sides of platform
• Swing out pantry rack SPR available in natural only• Door pantry rack DPR18 available in natural only• Full overlay cabinets require special hardware for
DPR18 installation. Included with the DPR.
EXAMPLE oF FULLy ACCESSorIZED PANTry CABINETPCSK3612-3/4 – See Price Book page 92.SPR – See Price Book pages 40 and 41. DPR – See Price Book page 67.
24"
36"
SPRSPR
DPR18 DPR18
*Requires 2 units
PRODUCT FITSDPR18 UB1884 VLC1884
UB1890 VLC1890UB1896 VLC1896
DPR24 UB2484UB2490UB2496
DPR18 U3684 PC3684BU3690 PC3690BU3696 PC3696B
32
TALL CABINETS AND UTILITy FroNTS (12”, 18”, 21” AND 24” Deep)18” deep vanity linen cabinets are available. To order 18” deep vanity linen cabinets add 18 to the end of the size code. Example: VLC159618.
UTILITy CABINET — 12” DEEP (84”, 90”, & 96” hIGh)See Price Book pages 42 and 43.
vANITy LINEN CABINET — 21” DEEP (84”, 90”, & 96” hIGh)See Price Book pages 42 – 45.
TALL
CA
BIN
ETS
84"
12" 15", 18", 24"
u1884l Shown
90"
21" 15", 18",24"
vlC1890l Shown
96"
24"36"
u369624B Shown
U1584 L or RU1884 L or RU2484 L or RU2484BU3084BU3684B
U1590 L or RU1890 L or RU2490 L or RU2490BU3090BU3690B
U1596 L or RU1896 L or RU2496 L or RU2496BU3096BU3696B
VLC1584 L or RVLC1884 L or RVLC2484 L or RVLC2484BVLC3084BVLC3684B
VLC1590 L or RVLC1890 L or RVLC2490 L or RVLC2490BVLC3090BVLC3690B
VLC1596 L or RVLC1896 L or RVLC2496 L or RVLC2496BVLC3096BVLC3696B
U158424 L or RU188424 L or RU248424 L or RU248424BU308424BU368424B
U159024 L or RU189024 L or RU249024 L or RU249024BU309024BU369024B
U159624 L or RU189624 L or RU249624 L or RU249624BU309624BU369624B
UF1884 L or R UF2484 L or RUF2484B*
UF1890 L or RUF2490 L or RUF2490B*
UF1896 L or RUF2496 L or RUF2496B*
• Specify L or R hinging• One door on both upper and bottom
sections• Face frame is not extended for toekick• Actual height of UF2484 is 79-1/2”• Actual height of UF2490 is 85-1/2”• Actual height of UF2496 is 91-1/2”* Four butt doors, no center mullion
791/2"85 1/2"91 1/2"
24"
90"
84"
EXAMPLES oF UTILITy CABINET CoNFIGUrATIoNS (36” WIDE)
U369024B Shown with USK3612-5/8 (order separately)
U368424B Shown with (4) ROT3624B (order separately)
UTILITy FroNTSee Price Book pages 44 and 45.
UTILITy CABINET — 24” DEEP (84”, 90”, & 96” hIGh)See Price Book pages 44 and 45.
• Specify L or R hinging• Available in 9” deep option for
single door utility cabinets
• Specify L or R hinging for single door vanity linen cabinets
• Available in 15” deep option.• To order 18" deep, add 18 at the end of
the size code. Example: VLC158418L.
• 24” deep utility cabinets not available in special depth• 15”, 18” and 24” wide cabinets have one door on both upper and bottom
sections. Specify L or R hinging• 30” and 36” wide cabinets have two butt doors on both upper and bottom
sections. 3” wide frame center mullion in upper section only• Fixed shelf between upper and bottom sections• For arch door styles only doors on upper section will be arch.• 96” tall cabinets have two adjustable shelves in upper section• 90” tall cabinets have one adjustable shelf in upper section• 84” tall cabinets have no shelves in upper section• Bottom section has pre-drilled end panels for adjustable shelves and/or tray
kits. Order separately• See USK for available shelf kits for Utility cabinets• See VLSK for available shelf kits for Vanity Linen cabinets• See ROT and BTK for available tray kits for 24” deep Utility cabinets• See VTK for available tray kits for 21” deep Vanity Linen cabinets• 96” tall cabinets include toe kick platform, shipped unattached for easier han-
dling and installation. Toekick cover required on exposed sides of platform
33
311/2"341/2"
VB60FH
• Actual cabinet width is 59-1/2”• Frame stiles extended so cabinet
is trimmable by 1/2”each side• Four doors• No shelf• Three center mullions• Traditional overlay door sizes:
Outer doors are 13-1/4” wide and inner doors are 12-5/8” wide
• Full overlay doors sizes: Outer doors are 14-5/8” and inner doors are 14” wide
• Two left doors hinged left, two right doors hinged right
AB
C
311/2"341/2"
311/2"
311/2"341/2"
vANITy CoMBINATIoN DrAWEr — SINGLE Door3 DrAWEr (34-1/2” hIGh)See Price Book pages 50 and 51.
• One door• Two standard drawers• One deep drawer• One false front • No shelf• Specify drawers left (DL) or drawers right (DR)
vANITy BASE — FULL-hEIGhT SINGLE DoorSee Price Book pages 46 and 47.
vANITy BASE — FULL-hEIGhT BUTT DoorSSee Price Book pages 46 and 47.
vANITy BASE — FULL-hEIGhT ThrEE DoorSee Price Book pages 48 and 49.
vANITy BASE — FULL-hEIGhT SINGLE Door (31-1/2” hIGh, 12” & 16” DEEP)See Price Book pages 50 and 51.
VB1212FH L or R*VB1816FH L or R**
• Specify L or R hinging • One door • No shelf * VB1212 is 12” deep** VB1816 is 16” deep
31-1/2” hIGhVB12FH L or RVB15FH L or RVB18FH L or RVB21FH L or RVB24SFH L or R
• Specify L or R hinging• One door• No shelf
34-1/2” hIGhVB1235FH L or RVB1535FH L or RVB1835FH L or RVB2135FH L or RVB2435SFH L or R
12"or 16"
311/2"
31-1/2” HIGH 34-1/2” HIGHVB48FH VB4835FHVB54FH VB5435FH
• Three full-height doors• No shelf• Center door is always hinged R-hand
vA
NITy
CA
BIN
ETS
vANITy BASE — FULL-hEIGhT DoUBLE DoorSee Price Book pages 48 and 49.
31-1/2” hIGhVB30FHVB33FHVB36FHVB42FH
• Two full-height doors• No shelf
34-1/2” hIGh
VB3335FHVB3635FHVB4235FH
VCD2435FH DL or DRVCD2735FH DL or DRVCD3035FH DL or DRVCD3335FH DL or DRVCD3635FH DL or DRVCD4235FH DL or DRVCD4835FH DL or DR
vANITy CoMBINATIoN DrAWEr — SINGLE Door2 DrAWEr (31-1/2” hIGh)See Price Book pages 50 and 51.
VCD24FH DL or DRVCD27FH DL or DRVCD30FH DL or DRVCD33FH DL or DRVCD36FH DL or DRVCD42FH DL or DRVCD48FH DL or DR
• One door• Two deep drawers• One false front • No shelf• Specify drawers left (DL) or drawers right (DR)
vANITy BASE — FULL-hEIGhT FoUr Door (31-1/2” hIGh) See Price Book pages 48 and 49.
vANITy BASE — FULL-hEIGhT DoUBLE BUTT DoorSSee Price Book pages 48 and 49.
vANITy CABINETS 31-1/2” AND 34-1/2” hIGh21" Deep. Specify Left or Right hinging for single door cabinets.18” deep vanities are available. To order 18” deep vanities add 18 to the end of the size code.
Example: VB603518BFH
341/2"
Drawers Right Shown
Drawers Right Shown
31 1/2"34 1/2"
BA
341/2"
591/2"
34-1/2” hIGhVB6035BFH
• Two sets of full-height butt doors• Actual cabinet width is 59-1/2”• Frame stiles are extended so
cabinet is trimmable by 1/2” each side
• No shelf• One center mullion• Equal size doors
31-1/2” hIGhVB24BFHVB27BFH
• Two full-height butt doors• No shelf• No center mullion
Cabinet face dimensions: A B C15” 18” 15”18” 18” 18”
48” =54” =
34
vA
NIT
y C
AB
INET
S
vANITy SINk BASE — 3 DrAWEr (31-1/2” hIGh)See Price Book pages 52 and 53.
VSB54FH-3DVSB60FH-3D*
• One standard height drawer and two deep drawers
• Two full-height doors hinged at side of cabinet
• No shelf* Actual cabinet width is 59-1/2”.* Frame stiles are extended so
cabinet can bem trimmed up to 1/2” each side
• VCD48FH - 1 door, always hinged R-hand• VCD60FH - Double doors, center mullion• Two standard height and four deep
drawers• No shelf• 48” has 21” space between
drawers for sink installation• 60” has 31-3/4” space between
drawers for sink installation* Actual cabinet width is 59 1/2”* Frame stiles extended so cabinet
is trimmable 1/2” each side.
vANITy CoMBINATIoN DrAWEr — 6 DrAWEr (31-1/2” hIGh)See Price Book pages 52 and 53.
vANITy CoMBINATIoN DrAWEr — 8 DrAWEr — BUTT DoorS AND DoUBLE Door (34-1/2" hIGh)See Price Book pages 52 and 53.
• VCD4835FH - One door, always hinged R-hand
• VCD6035BFH - Butt doors, no center mullion
• Six standard height and two deep drawers
• No shelf• 48” has 21” space between
drawers for sink installation• 60” has 31-3/4” space between
drawers for sink installation* Actual cabinet width is 59-1/2”* Frame stiles extended so cabinet
is trimmable 1/2" each side
VCD4835FH†VCD6035BFH*
vANITy SINk BASE — DoUBLE Door — 2 DrAWErSee Price Book pages 52 – 55.
• Two doors• Two drawers• No shelf• One false front between drawers• Drawer cores are offset to allow
for 18” between drawers for sink installation
VSB36-2DVSB39-2D
31-1/2” hIGhVSB3635-2DVSB3935-2D
34-1/2” hIGh
31-1/2"34-1/2"
AB
C
vANITy SINk BASE — 4 DrAWEr (34-1/2” hIGh)See Price Book pages 52 and 53.
• Two full-height doors hinged at side of cabinet
• Three standard height drawers and one deep drawer
* Actual cabinet width is 59-1/2” * Frame stiles are extended so
cabinet can be trimmed 1/2” each side
VSB5435FH-4DVSB6035FH-4D*
• Two full-height butt doors• No center mullion• Two standard height drawers• One deep drawer• One false front• No shelf• Specify drawers left (DL) or
drawers right (DR)
vANITy CoMBINATIoN DrAWEr — BUTT DoorS3 DrAWEr (34-1/2” hIGh)See Price Book pages 52 and 53.
VCD4835BFH DL or DR
vANITy CoMBINATIoN DrAWEr — BUTT DoorS2 DrAWEr (31-1/2”hIGh)See Price Book pages 50 and 51.
VCD48BFH DL or DR
• Two full-height butt doors• No center mullion• Two deep drawers• One false front• No shelf• Specify drawers left (DL) or
drawers right (DR)
311/2"
Drawers Right ShownDoor - Drawer 24” - 24”
vANITy CABINETS 31-1/2” AND 34-1/2” hIGh 21" Deep. Specify Left or Right hinging for single door cabinets. 18” deep vanities are available. To order 18” deep vanities add 18 to the end of the size code. Example: VB603518BFH
341/2"
Drawers Right ShownDoor - Drawer 24” - 24”
VCD48FHVCD60FH*
AB
C
311/2"
vCD48fh Shown
31-1/2"34-1/2"
59-1/2" CB
AvCD6035Bfh Shown
AB
C
31-1/2"34-1/2"
AB
C
341/2"
A B C 12” 12” 12”
Drawer/False Front Configuations
36” =39” = 13-1/2” 12” 13-1//2”
48” =59 1/2” =
A B C15” 18” 15”15” 28-3/4” 15”
Cabinet face dimensions:
A B C15” 18” 15”15” 28-3/4” 15”
48” =59 1/2” =
Cabinet face dimensions:
Cabinet face dimensions:
A B C21” 12” 21”20-3/4” 18” 20-3/4”
54” =59 1/2” =
Cabinet face dimensions:
A B C21” 12” 21”20-3/4” 18” 20-3/4”
54” =59 1/2” =
35
311/2"341/2"
30"or 36"
5 3/16"• Actual cabinet width is 59-1/2”• Frame stiles extended so cabinet is
trimmable 1/2” each side• Two drawers• No shelf• One false front between drawers• Four doors, left doors hinged L-hand
and right doors hinged R-hand• Traditonal overlay door sizes:
VSB60-2D inner doors are 12-5/8” wide, outer doors are 13-1/4” wide
• Full overlay door styles: VSB60-2D inner doors are 14” wide, outer doors are 14-5/8” wide
• Full overlay door styles: VSB6035B-2D inner doors are 14-1/8”, outer doors are 14-5/8”
• 31-3/4” space between drawers for sink installation• VT6122 DBOG4 requires converting drawers to false fronts* Traditional overlay door sizes: VSB6035B-2D has butt inner doors,
no center mullion, 13-7/16” wide. Outer doors are 13-1/4” wide
DESk kNEE DrAWEr DEEP TrIMMABLE — SINGLE DrAWEr (6-1/2” hIGh)See Price Book pages 56 and 57.
DKDDT36
• One drawer• Frame is 3/4” plywood• Trimmable to 21” wide;
7-1/2” each side• Requires countertop/writing
surface• Features standard height
vanity drawer core• Available 18” deep
vA
NITy
CA
BIN
ETS
vANITy SINk BASE — SINGLE DoorSee Price Book pages 54 and 55.
31-1/2” hIGh 34-1/2” hIGh VSB24 L or R VSB2435 L or R
• Specify L or R hinging• One door• No shelf• One false front
311/2"341/2"
vANITy SINk BASE — BUTT DoorSee Price Book pages 56 and 57.
311/2"341/2"
DESk kNEE DrAWEr TrIMMABLE — SINGLE DrAWEr(5-3/16” hIGh) See Price Book pages 56 and 57.
DKDT30DKDT36
• One 1-5/8” deep pencil drawer• Unit is designed to be installed
between cabinets for sitting• 4-1/2” wide face frame stiles;
3/4” thick solid hardwood face frame • DKDT30 is trimmable to 24” wide, 3” each side• DKDT36 is trimmable to 30” wide, 3” each side• 5-Piece front defaults to a solid front• Glaze option available in Classic2, Jamestown2 and Quincy2• Requires countertop/writing surface• Top panel is recessed for easier installation• Available 18” deep
31-1/2"34-1/2"
59-1/2" CB
A
vANITy SINk BASE — FoUr Door — 2 DrAWEr See Price Book pages 54 and 55.
31-1/2” hIGh 34-1/2” hIGhVSB60-2D VSB6035B-2D*
vANITy SINk BASE — ThrEE Door — 2 DrAWErSee Price Book pages 54 and 55.
• Three doors. Center door is always hinged R-hand
• Two drawers• No shelf• One false front between
drawers• 21” space between drawers
for sink installation• 54” wide cabinets have a full-width
support cross rail along top front
vANITy SINk BASE — DoUBLE DoorSee Price Book pages 56 and 57.
31-1/2” hIGh 34-1/2” hIGhVSB30VSB33 VSB3335VSB36 VSB3635VSB42
• Two doors• One false front, except VSB42
which has two• No shelf
311/2"341/2"
30”- 36” Shown
36"
6 1/2"
A B C15” 28-3/4” 15”
31-1/2” hIGh 34-1/2” hIGhVSB42-2D VSB4235-2DVSB48-2D VSB4835-2DVSB54-2D VSB5435-2D
vANITy BASE — SINGLE Door AND BUTT DoorSSee Price Book pages 58 and 59.
31-1/2” hIGh 34-1/2” hIGhVB12 L or R VB1235 L or RVB15 L or R VB1535 L or RVB18 L or R VB1835 L or RVB21 L or R VB2135 L or RVB24 L or R VB2435 L or RVB24B* VB2435B*
• Specify L or R hinging• One door• One drawer• No shelf* Butt door, no center mullion
31-1/2"
AB
C
34-1/2"
31-1/2” hIGh 34-1/2” hIGh VSB24B VSB2435BVSB27B VSB2735B VSB3035B• Butt doors• No center mullion• No shelf• One false front
A B C42" = 12" 18" 12"48" = 15" 18" 15"54" = 18" 18" 18"
Cabinet face dimensions:
vANITy CABINETS 31-1/2” AND 34-1/2” hIGh21" Deep. Specify Left or Right hinging for single door cabinets. 18” deep vanities are available. To order 18” deep vanities add 18 to the end of the size code.
Example: VB603518BFH
36
vANITy DrAWEr — 3 DrAWEr (31-1/2” hIGh)See Price Book pages 58 and 59.
VD12-3DVD15-3DVD18-3DVD21-3DVD24-3D
vA
NIT
y C
AB
INET
S
31 1/2"
DESk FILE DrAWEr (29” hIGh)See Price Book pages 60 and 61.
• One standard height top drawer• Bottom file drawer has full
extension guides and hanging folder hardware
• Front of file drawer is styled as a door
• Accommodates legal or letter size folders
• Not available in special depths
DFD18
29"
• Three drawers; one standard and two deep
• Not available in 12” and 15” reduced depth
vANITy CABINETS 31-1/2” AND 34-1/2” hIGh 21" Deep. Specify Left or Right hinging for single door cabinets. 18” deep vanities are available. To order 18” deep vanities add 18 to the end of the size code. Example: VB603518BFH
vANITy DrAWEr — 4 DrAWEr (34-1/2” hIGh)See Price Book pages 60 and 61.
34-1/2"
VD1235-4DVD1535-4DVD1835-4DVD2135-4DVD2435-4D
• Not available in 12” and 15” reduced depth
DESk DrAWEr CABINET — 3 DrAWEr (29” hIGh)See Price Book pages 60 and 61.
DDR12DDR15DDR18DDR21DDR24 29"
• Not available in 12” and 15” reduced depth
NoTES
37
vANITy CABINETSAll single door vanity wall cabinets are invertible for L or R hinging except arched door styles. Specify L or R for arched door.
4-3/4"12"
30"
vANITy LINEN CABINET — SINGLE Door (48” hIGh, 16” DEEP)See Price Book pages 60 and 61.
VLC184816 L or R
• One door• Three adjustable shelves• Designed to stack on countertop only • Not available in special depths• Specify L or R for arched styles
48"
16" 18"
vANITy WALL — SINGLE Door (30” hIGh, 4 3/4” DEEP)See Price Book pages 60 and 61.
VW1230 L or R
• One door• Two adjustable shelves• Not available in special depths• Specify L or R for arched styles
vANITy WALL BoUTIQUE — BUTT DoorS See Price Book pages 60 and 61.
VWB2738B
• Butt doors• No center mullion• Two adjustable shelves• Interior, shelves, and open display
area matches the cabinet exterior• 5" high display opening• Not available in special depths
38"
5"
27"7"
vANITy WALL rECESSED — SINGLE Door(20-1/2” hIGh, 4-1/4” DEEP)See Price Book pages 60 and 61.
VWR1521 L or R
• Specify L or R for arched styles• One door• One adjustable shelf• Not available in special depths• Can be surface or recess mounted,
designed to fit between wall studs 16” on center
• Natural Maple interior except for Starlight
4-1/4" 15"
20-1/2"
opening for recessed installation13-1/2”W x 19-1/4”H x 3-1/2”D
vANITy WALL rECESSED — SINGLE Door(30” hIGh, 4-1/4” DEEP)See Price Book pages 62 and 63.
VWR1530 L or R
• Specify L or R for arched styles• One door• Two adjustable shelves• Not available in special depths• Can be surface or recess mounted,
designed to fit between wall studs 16” on center
• Natural Maple interior except for Starlight
4-1/4" 15"
30"
opening for recessed installation13-1/2”W x 28-3/4”H x 3-1/2”D
TrI-vIEW MEDICINE CABINETSee Price Book pages 62 and 63.
TVMC2430TVMC3030TVMC3630
• Includes three mirrors• Two adjustable 5/8” shelves• Not available in special depths• Designed for surface or
recessed mount• Requires some assembly at
time of installation• Tri-view mounting kit (TVMK) is
included
30"
24", 30", 36"4 1/4"
opening for recessed installation24” = 22-3/4”W x 28-3/4”H x 3-1/2”D30” = 28-3/4”W x 28-3/4”H x 3-1/2”D36” = 34-3/4”W x 28-3/4”H x 3-1/2”D
vA
NITy
CA
BIN
ETS
38
ACCESSorIES
AGTD24
• Kit is ready to assemble• Fits under wall angle cabinets• Provides countertop storage
for small appliances• Features solid wood roll-up
tambour door with finger pull• Hole for knob is pre-drilled• End panels must be notched
to fit backsplashSoLID WALL END oPEN ShELF (30”, 36”, AND 42” hIGh)See Price Book page 64.
SWEOS30SWEOS36SWEOS42*
• Solid wood shelves• Three sections• Invertible L or R* Four sections
APPLIANCE GArAGE TAMBoUr STrAIGhT (18-1/4” hIGh)See Price Book page 64.
SoLID BASE END oPEN ShELFSee Price Book page 64.
SBEOS924
UCS48
• Trimmable• Solid hardwood• Shelf 3/4” x 5-1/4”• Spice rack is shipped
ready to assemble• Designed to fit the under-
side of wall cabinets up to 48” wide
SPBEOS924
• Solid wood shelves
SGH36
• Trimmable• Designed to fit under any wall
cabinet 36” wide or less• 2 wood cleats furnished
for installation at bottom of cabinet
CoUNTErToP SUPPorT BrACkET (9” hIGh)See Price Book page 64.
CTSB CTSB-2
• 3/4” Solid hardwood• Offered individually or two per carton
18 1/4 "
91/4"
91/4"
35 1/2"
30"36"42"
6" 12"
34 1/2"
34 1/2"
9"
9"
2 1/4"
• Assembled square toe kick furnished loose so L or R hand installation can be made in the field
• Solid wood shelves
APPLIANCE GArAGE TAMBoUr DIAGoNAL (18-1/4” hIGh)See Price Book page 64.
STEM GLASS hoLDErSee Price Book page 64.
SoLID PENINSULA BASE END oPEN ShELFSee Price Book page 64.
UNDEr CABINET ShELFSee Price Book page 64.
AGTS18AGTS24
• Kit is ready to assemble• Fits under wall cabinets• Provides countertop storage
for small appliances• Features roll-up tambour door• End panels must be notched
to fit backsplash• Holes for knob are pre-drilled• Solid wood tambour
18 1/4"
13 1/2" 17 "
12 "
9"
3"
45° 3"
24"
top view
45° 3"
3"
24"
9"
45°
top view
AC
CES
So
rIE
S
39
24"
11 1/2"
22 1/4"26 1/4"
12"
30"
6"
ACCESSorIESorGANIZEr (6” hIGh)See Price Book page 65.
O30O36
oPEN CUBE orGANIZEr (6” x 30” x 12”) See Price Book page 65.
OCO30
• Designed to be used in horizontal or in vertical position
• Five equal compartments• Cube opening 5-1/4" x 5-1/4"
30" 12"
6"
30"
12"
6"
AC
CES
So
rIES
SPICE DrAWEr orGANIZEr (6” x 30” x 12”) See Price Book page 65.
CHIMNEY36* HOOD36CCHIMNEY42* HOOD42C
2-piece, order separately• Chimney section shipped separately• Solid wood/wood veneer construction• Available in all wood species• Hoods should be set a minimum of
30” above the cooking surface• A 3” space is recommended on the
right and left side of this unit• Liner is not included with hood or chimney• Cabinetry and appliances located below
these wall hoods should be pulled to a minimum of 27” and a maximum of 30” for improved function
• Will accept optional onlay• Not designed for use with a soffit• This hood must be securely
fastened to the wall• Starlight not available• Order blower separately* Available glazed
36"42" 19 3/4"
24"
ChIMNEy rANGE hooD BLoWErWITh hALoGEN LAMPSSee Price Book page 66.
CRHB36-660CRHB42-660
Fits HOOD36C and HOOD42C • This unit is used for ducted to
• Hickory, Cherry, Cashmere and Snowdrift available in hardwood moldings only
• Available in glazed finishes• Offered in individual 8’ lengths or cartons of 10 (80’), except
Starlight• Print not available with V-notch for use with MBUS96* Starlight offered in individual 12’ lengths or cartons of 10 (120’)* Starlight is paper-wrapped only
• Finished face and two sides• Available in glazed finishes• Cartons of 6 available
13/16
1 32" / "
4-11 32"
3"
3"
End View D tail
3 4
1/8"
13/16" 11/16"
11/32" 3/8"
4-11/32"
End View Detail
3/4"
23 1/230"3 "
3"
3/4"
3/4" 3/4" 3/4" 3/4"
1/8" 5/8"
1/2"1/4"
End View Detail
/8
3 "
48
FULL ovErLAy APPLIQUES(2-5/8” AND 5-5/8” WIDE)
• Full Overlay Appliques are designed to be used with the door styles: Manchester2, Hancock2, Sableton2, Provincial2, Sussex2, Jamestown2, Quincy2, Westminster2, Sonnet2, Nantucket2 and Wayfarer2
• All Full Overlay (FOL) Appliques are either 3/4” thick solid maple hardwood, 3/4” thick solid cherry hardwood, 3/4” thick solid oak hardwood or 3/4” thick MDF board laminated with Starlight RTF
• Edge profile on all sides to match the outside edge of the door style ordered. (There is no door style panel design, i.e., no Square Raised Panel or Arch Raised Panel.)
• Appliques may be scribed to fit. This may require the next wider size applique.
• Note: Please order corresponding size Standard Fillers when design-ing with FOL Appliques.
11-1/4"14-1/4"17-1/4"
19-3/4"22-3/4"26-1/4"
29-1/4"35-1/4"41-1/4"47-1/4"
59-1/4"78-3/4"84-3/4"90-3/4"
WALL AND TALL FULL ovErLAy APPLIQUES (2-5/8” WIDE)See Price Book page 76.
• Not available in Hickory or Axiom2• Glazed finishes are available for Westminster2,
Sonnet2, Jamestown2 and Quincy2• See details on Full Overlay Appliques above• Order filler separately • No carton qtys• Also for use with base and vanity cabinets
WFOL3-12WFOL3-15WFOL3-18
WFOL3-21WFOL3-24WFOL3-27
WFOL3-30WFOL3-36WFOL3-42WFOL3-48
TFOL3-60TFOL3-79TFOL3-85TFOL3-91
Jamestown2Quincy2
Wayfarer2Westminster2
Hancock2Manchester2Nantucket2Provincial2Sableton2
Sonnet2
Sussex2
ProFILE
11-1/4"14-1/4"17-1/4"
19-3/4"22-3/4"26-1/4"
29-1/4"35-1/4"41-1/4"47-1/4"
59-1/4"78-3/4"84-3/4"90-3/4"
WALL AND TALL FULL ovErLAy APPLIQUES (5-5/8” WIDE)See Price Book page 76.
• Not available in Hickory or Axiom2• Glazed finishes are available for Westminster2,
Sonnet2, Jamestown2 and Quincy2• See details on Full Overlay Appliques above• Order filler separately• No carton qtys• Also for use with base and vanity cabinets
WFOL6-12WFOL6-15WFOL6-18
WFOL6-21WFOL6-24WFOL6-27
WFOL6-30WFOL6-36WFOL6-42WFOL6-48
TFOL6-60TFOL6-79TFOL6-85TFOL6-91
ProFILE
Jamestown2Quincy2
Wayfarer2Westminster2
Hancock2Manchester2Nantucket2Provincial2Sableton2
Sonnet2
Sussex2
FILLErS
FILL
ErS
49
12"15"18"
20 1/2"23 1/2"
27"30"36"42"48"60"
79 1/2"85 1/2"91 1/2"
12"24"27" 2"
View of fluted column section
DECorATIvE CoLUMN ANGLED FLUTED END CAP — 12”, 24” or 27” DEEPSee Price Book page 77.
12"15"18"
20 1/2"23 1/2"
27"30"36"42"48"60"
79 1/2"85 1/2"91 1/2"
12"24"27" 2"
DECorATIvE CoLUMN ANGLED roUND END CAP —12”, 24” or 27” DEEPSee Price Book page 78.
view of round column section
• DCOLA designed to fit flus with face frame height
• DCOLA designed to fit flush with face frame height
top viewview of fluted column section
51
rEFrIGErATor END PANEL WITh ATTAChED FILLEr — 12”, 24”, 27” AND 36” DEEP (84” or 96” hIGh)See Price Book page 81.
• Trimmable• 1-1/2” solid hardwood filler• 1/2” engineered wood side panel, laminated 2 sides• Exterior has same laminate as cabinet end panels• Inside surface is Natural Maple or Starlight• Available with plywood panels
UNIvErSAL ACCESS ToE kICk CovEr See Price Book page 81.
• TKCUL8 - 1/8” (.142) thick laminated hardboard • TKCUV8 - 3/16” plywood (not available in Starlight)
PANELS
PA
NELS
SINk FroNT END PANEL (23-3/8” DEEP, 34-1/2” hIGh)See Price Book page 82.
• Outside matches finish ordered; inside is Natural Maple or Starlight
• Edgeband on front• Trimmable• Use with trimmable sink front• 3/8” engineered wood, laminated
2 sides• Notch in field for toe space
SFEP 23 3/8"
34 1/2"
3"6"
341/2"
24"
BASE END PANEL FILLEr (34-1/2” hIGh)3” or 6” WIDE FroNT FILLErSee Price Book page 82.
BEPF3BEPF6
• Panel outside matches finish ordered; inside is Natural Maple or Starlight
• Trimmable• Notch in field for toe space• 3” or 6” solid hardwood stile attached
to panel• 3/8” engineered wood, laminated
2 sides• Available with plywood ends
UNIvErSAL DESk END PANELSee Price Book page 82.
UDEP2124UDEP2124P (Starlight only)*
• Reversible for L or R end• 3/4” plywood with hardwood
veneer 2 sides on stain color• Starlight is 3/4” engineered
wood* , laminated 2 sides• Edge banding on front edge
TKCUL8TKCUV8
WALL CorNEr CLoSUrESee Price Book page 81.
• 1/2” thick laminated engineered wood• Specify Natural Maple or Starlight• Offered individually or 10 per carton
WCC WCC-10
ToE kICk CovErSee Price Book page 81.
• TKCL8 - 1/8” (.142) thick laminated hardboard • TKCV8 - 3/16” plywood (not available in Starlight)• Offered individually or 25 per carton
151/4"151/4"
8"
4 7/16"
TKCL8TKCL8-25TKCV8TKCV8-25
25"
3/4"
96"
FINIShED ShELvING 3/4” ThICkSee Price Book page 82.
• Veneer both sides• 3/4” thick plywood finished both sides• Available for Cashmere, Snowdrift and Shadow• Starlight is melamine on 3/4” engineered wood
FS2596
24"
96"84"
27"
96"84"
84"96"
12"
REPF1-5-1284REPF1-5-1296
REPF1-5-2784REPF1-5-2796
36"
96"84"
REPF1-5-2484REPF1-5-2496
REPF1-5-3684REPF1-5-3696
5 1/2"
9"
21"3/4"
23 1/2"
8"
5 7/16"
52
PA
NEL
S
SPECIFICATIoNS For WAINSCoT PANELSWainscot Panels are designed for use with the following door styles: Hancock2 Square Provincial2 SquareHeritage2 Square Quincy2 SquareJamestown2 Square Sableton2 SquareManchester2 Square Sonnet2 SquareMeriwether2 Square Sussex2 SquareNantucket2 Square Wayfarer2 SquareNottingham2 Square Westminster2 Square
NOTE: When ordering miter styles (example: MANCHESTER2) you must reduce height by 4-1/2” from all other WPB and WPV page 55.
All Wainscot Panels will have a 1/16” eased outside profile. The eased edge profile allows for finished molding applications without voids or gaps behind the molding.
All panel dimensions are nominal. (Example: WPWxx34 is 34-1/2” high)
Oak, Cherry and Hickory frames will be made with 3/4” solid hardwood using mortise and tenon joint construction. Their panels are 9/16” solid hardwood. Maple frames will be made with 3/4” solid maple hardwood using mortise and tenon joint construction. Maple panels will be made of sliced veneer over industrial grade particleboard (9/16”). Starlight panels will be made of 3/4” MDF board and laminated with solid color RTF (Rigid thermofoil).
General InformationAll panel sizes are width by height. (Example: WPW 3630 is 36” wide by 30” high)
Wainscot panels are manufactured using solid stock except Jamestown2 and Quincy2 (veneer panel only).
Panel MaterialRaised Panels: Maple and Oak are MDF with veneer. Hickory, Rustic Maple and Cherry are solid wood. Flat panels are MDF with veneer. Starlight is MDF with laminate.
WPBxx34WPVxx31
WPBxx30WPVxx27
Standard Door Styles
MiterDoor Styles
NoTE WhEN orDErING MITEr
WooD ToPSee Price Book page 83.
WT2296WT2596
• Edges are not finished• Wood veneer plywood
panel both sides• 3/4” thick plywood • Finished one side only• Starlight is melamine on
3/4” engineered wood, finished both sides
96"
22"25"
24"
34-1/2"
9"
6-1/2"
DESk END PANELSee Price Book page 82.
DEP2434DEP2434P (Starlight only)*
• Reversible for L or R end• 3/4” plywood with hardwood
veneer 2 sides on stain color• Edge banding on front edge* Starlight is 3/4” engineered
wood laminated 2 sides
21"
29"
6-1/2"
6"
DESk END PANELSee Price Book page 82.
DEP2129DEP2129P (Starlight only)*
• Reversible for L or R end• 3/4” plywood with hardwood veneer
2 sides on stain color• Edge banding on front edge* Starlight is 3/4” engineered wood
laminated 2 sides
UNIvErSAL DESk END PANELSee Price Book page 82.
UDEP2424UDEP2424P (Starlight only)*
• Reversible for L or R end• 3/4” plywood with hardwood
veneer 2 sides on stain color• Edge banding on front edge* Starlight is 3/4” engineered
wood , laminated 2 sides5 1/2"
9"
24"3/4"
23 1/2"
PANELS
53
PANELS
WAINSCoT PANEL WALL (WPW)See Price Book page 83.
• Stile width will vary per door style
• Rails are 3-1/4” high• 36” wide will have 2
panels, 48” wide will have 3 panels and 60” wide will have 4 panels
• Available in glazed finishes
• NOTE: Jamestown2, Quincy2 and Wayfarer2 rails are 3-1/2” top and bottom
WAINSCoT PANEL BASE (WPB)See Price Book page 83.
34-1/2” hIGhWPB3634WPB4834WPB6034
• Stile width will vary per door style• Rails are 3-1/4” top and 7-3/4” bottom• 36” wide will have 2 panels, 48” wide will have 3 panels and
60” wide will have 4 panels• Available in glazed finishes• NOTE: Jamestown2, Quincy2 and Wayfarer2 rails are 3-1/2” top
and 8” bottom
WPW4818WPW4824WPW4830WPW4836WPW4842WPW4848
48” WIDE3 Panels
WPW6018WPW6024WPW6030WPW6036WPW6042WPW6048
60” WIDE4 Panels
WPW3618WPW3624WPW3630WPW3636WPW3642WPW3648
36” WIDE2 Panels
MITErED STyLES30” hIGhWPB3630WPB4830WPB6030
36", 48", 60"
18"23-1/2"
30"36"42"48"
3-1/4"
3-1/4"
Shown 36” wide (2 panels)
36", 48", 60"
30"
3-1/4"
7-3/4"
Shown 36” wide (2 panels)
PA
NELS
WAINSCoT PANEL vANITy (WPv)See Price Book page 84.
31-1/2” HIGHWPV3631WPV4831WPV6031
• Stile width will vary per door style • Rails are 3-1/4” top and 7-3/4” bottom• 36” wide will have 2 panels, 48” wide will have 3 panels and 60”
wide will have 4 panels• Available in glazed finishes• NOTE: Jamestown2, Quincy2 and Wayfarer2 rails are 3-1/2” top
and 8” bottom
MWEP30 MWEP36MWEP42
• Includes 3/16” plywood panel finished one side and door
• Starlight panel is laminated one side• Full overlay arch styles require field assembly• Full overlay doors overlap frame edge to provide correct reveals• Not available in Cashmere and Snowdrift
MVEP2131 MVEP2135
• Includes 3/16” plywood panel finished one side and door
• Toespace notch must be field cut• Starlight panel is laminated one side• Full overlay styles require field assembly• Full overlay doors overlap frame edge to provide correct reveals• Not available in Cashmere and Snowdrift
• Includes 3/16” plywood panel finished one side and door
• Toespace notch must be field cut• Starlight panel is laminated one side• Full overlay styles require field assembly• Full overlay doors overlap frame edge to provide correct reveals• Not available in Cashmere and Snowdrift
• Includes 3/16” plywood panel finished one side and door
• Toespace notch must be field cut• Starlight panel is laminated one side• Field assemble• Full overlay doors overlap frame edge
to provide correct reveals• Tall doors always come square• Not available in Cashmere and Snowdrift
MITErED STyLES27” HIGHWPV3627WPV4827WPV6027
36", 48", 60"
31-1/2"27"
3-1/4"
7-3/4"
Shown 36” wide (2 panels)
MATChING vANITy END PANELSee Price Book pages 85 and 86.
MATChING BASE END PANELSee Price Book page 86.
MBEP34
MATChING TALL END PANELSee Price Book pages 87 – 89.
MTEP1284MTEP1290MTEP1296
MTEP2184MTEP2190 MTEP2196
MTEP2484MTEP2490 MTEP2496
MATChING WALL END PANELSee Price Book pages 84 and 85.
BASE BLIND PANEL WITh FILLErSee Price Book page 91.
BBPF3
BBPF
3
3"
• 1/4” thick engineered wood panel laminated on side against cabinet
• Used with BBC cabinets to provide clearance in the corner and cover the face frame opening of blind area
• 3” wide solid hardwood stile attached to panel. Matches finish ordered
• 23 1/4” deep
96"
48"3"
v − GroovE PANEL (3/8” vENEEr FACED PLyWooD)See Price Book page 91.
• Can be used as wainscotting or to cover the exposed backs of base and tall cabinets in peninsula/island con-figurations
• Available in full sheet sizes only (48” width, 96” height)
• 3/8” thick veneer plywood• Bead groove spacing 3” on center• Not available in Starlight• Available in glazed finishes• See Cabinet Panel Edge(CPE8)
molding on page 47.
VGP4896
WALL BLIND PANEL WITh FILLEr (30” AND 42” hIGh)See Price Book page 91.
WBPF3-30WBPF3-42
WB
PF3
3"
• 11 1/4” deep• Used with WBC cabinets to
provide clearance in the corner and cover the face frame opening of blind area
• Trim length as required• 3” wide solid hardwood stile
attached to panel. Matches finish ordered• 1/4” thick engineered wood panel laminated on side against cabinet
FINIShED PANELING (3/16” vENEEr FACED PLyWooD)See Price Book page 90.
FPP34 48” x 34-1/2”FPP34-2
FPP96 48” x 96”FPP96-2
FPX9634 (crossgrain)FPX9634-2 96” x 34-1/2”
• Available in full sheet• 3/16” thick hardwood veneer faced
plywood• Grain direction runs parallel to second
dimension in the description (vertically)• Not available in Starlight• Cartons of 2* Not available in Cashmere and
Snowdrift
END PANEL — PAPEr LAMINATESee Price Book page 91.
WALL WIDTH X HEIGHTWEP30P 11-1/4” x 30” WEP30P-10WEP42P 11-1/4” x 42” WEP42P-10
BASEBEP34P 23-1/4” x 34-1/2” BEP34P-10
TALLTEP84P 23-1/4” x 84” TEP84P-2 TEP96P 23-1/4” x 96” TEP96P-2• 9/64” (.142) thick Medium Density
Fiberboard (MDF) panel • Laminated one side• WEP30P, WEP42P, and BEP34P available individually or cartons
of 10• TEP84P and TEP96P available individually or cartons of 2
PANEL BACkEr — PAPEr LAMINATESee Price Book page 90.
WIDTH X HEIGHTPB4834P 48” x 34-1/2” PB4834P-2PB4896P 48” x 96” PB4896P-2
• 9/64” (.142) thick Medium Density Fiberboard (MDF) panel
• Laminated one side• Available individually or cartons
of 2
FINIShED END PANEL (3/16” vENEEr FACED PLyWooD)See Price Book page 90.
WALLWEP30 11-1/4” x 30” WEP30-10WEP42 11-1/4” x 42” WEP42-10
BASEBEP34 23-1/4” x 34-1/2” BEP34-10
TALLTEP84 23-1/4” x 84” TEP84-2 TEP96 23-1/4” x 96” TEP96-2
• 3/16” thick hardwood veneer faced plywood• Grain direction runs parallel to second dimension
in the description (vertically)• Not available in Starlight• TEP84 and TEP96 available individually or cartons of 2• WEP30, WEP42, and BEP34 available individually or cartons of 10
48"
48"
34 1/2"
96"
PA
NEL
S
**
55
ShELvING
PANTry CABINET ShELF kIT — 12” DEEP(5/8” AND 3/4” ThICk)See Price Book page 92.
PCSK3612-5/8PCSK3612-3/4
UTILITy ShELF kIT — 12” AND 24” DEEPSee Price Book page 92.
• Kit includes 5 engineered shelves and 20 shelf supports
• Laminated top and bottom with matching edgebanding on front edge
• Available in Natural Maple or Starlight• For use in pantry cabinets• 10 19/32” deep x 16 1/2” wide
BACk PLUGSSee Price Book page 95.
BACKPLUG2H/10000BACKPLUG2H/125BACKPLUG2H/50
ShELF CLIP CLEAr See Price Book page 95.
SALES AIDSSee Price Book page 94.
WF1527L - WALL FRONT (Arches only)VF15 - VANITY FRONT (Square and slab styles)SD1215N - Sales Sample Door
• Clear plastic plugs for base and vanity cabinet back panel factory drilled holes
• Each plug fills the pair of 10mm diameter holes• 50, 125, or 10,000 per carton
BASE ShELvING — FULL DEPThSee Price Book page 92.
• 5/8” engineered wood• Laminated two sides• Edge banded front only• Available in Natural Maple or Starlight
Laminate 22-9/16 x 10-9/16 x 5/8Laminate 22-9/16 x 13-9/16 x 5/8Laminate 22-9/16 x 16-9/16 x 5/8Laminate 22-9/16 x 19-9/16 x 5/8Laminate 22-9/16 x 22-9/16 x 5/8Laminate 22-9/16 x 25-9/16 x 5/8Laminate 22-9/16 x 28-9/16 x 5/8Laminate 22-9/16 x 31-9/16 x 5/8Laminate 22-9/16 x 34-9/16 x 5/8Laminate 22-9/16 x 37-9/16 x 5/8Laminate 22-9/16 x 43-9/16 x 5/8Laminate 22-9/16 x 46-9/16 x 5/8
• Kit includes 5 engineered wood laminate shelves and 20 shelf supports
• Laminated top and bottom with matching edgebanding on front edge
• Available in Natural Maple or Starlight• 19 19/32” deep• For use in vanity linen cabinets (VLC)* 30” and 36” wide shelves are plywood laminated on both sides
• Kit includes 5 engineered wood laminate shelves and 20 shelf supports
• Laminated top and bottom with matching edgebanding on front edge• Available in Natural Maple or Starlight• 12” utility shelves are 10 19/32” deep• 24” utility shelves are 22 19/32” deep• For use in utility cabinets (U)* 30” and 36” wide shelves are plywood laminated on both sides
FINIShED ShELvINGSee Price Book page 93.
FS3613*FS3613-2*FS4813FS4813-2FS7213FS7213-2
• Wood veneer both sides for stain and painted colors• Starlight has low pressure melamine surfaces• 3/4” thick• Edge banded front and back • Offered individually or cartons of 2* Actual dimension 36-1/2”
13"
3/4"
SHLF_CLIP_5M_4/CT• When ordering, please specify 5/8 or 3/4
22 9/16"
Sh
ELvIN
G
56
DECorATIvE hArDWArESee Price Book page 96.
P02112-SS-C Flat End Bar Pull Stainless Steel 238mm Long 7”(178mm) Center to Center
P02140-SS-C Flat End Bar Knob Stainless Steel 40mm Long with Stop
P02164-SS-C Flat End Bar Pull Stainless Steel 115mm Long 64mm Center to Center
P39955-SN-C Half Round Foot Pull Satin Nickel 3”
P83506-SN-C Fusilli Pull Satin Nickel 96mm
PN0393-SN-C Large Football Knob Satin Nickel 35mm
PN0402-SN-C Rope Edged Pull Satin Nickel 96 mm
PN0409-SN-C Perimeter Knob Satin Nickel 30mm
PN0602-SN-C Cup Pull Satin Nickel 64mm
PN0293-SN-C Rope Edged Knob Satin Nickel 30mm
P50154-STN-C Round Knob Sterling Nickel 1 1/4”
P83506-BLN-C Fusilli Pull Black Nickel 96mm
P50150-BLC-C Round Knob Black Chrome 1 1/4”
PBF304-BSP-C Totem Knob Satin Pewter 33mm
PBF305-BSP-C Totem Pull Satin Pewter 96mm
PN1291-BSP-C French Tassel Knob Brushed Satin Pewter 33mm
PN1293-BSP-C French Tassel Pull Brushed Satin Pewter 3” Center to Center
P13101-PC-C Pull Polished Chrome 3”
P50121-PC-C7 Spoon Foot Pull Polished Chrome 3”
P65010-CHR-A Concave Round Knob Chrome 1”
PN0395-PC-C Medium Football Knob Polished Chrome 30mm
P95712-W-C Round Knob White Ceramic 1 1/4”
PN0528-AP-C Small Birdcage Oval Knob Antique Pewter 50mm
PN0393-OB-C Large Football Knob Oil Rubbed Bronze 35mm
P45005-VBR-C Slender Pull Venetian Bronze 96mm
PN0408-VBR-C Ridge Knob Venetian Bronze 30mm
ProDUCT CoDE DESCrIPTIoN
ProDUCT CoDE DESCrIPTIoN
DEC
or
ATI
vE h
Ar
DW
Ar
E
NoTES
57
58
rEPAIr AND rEPLACEMENT PArTS
rEP
LAC
EMEN
T P
Ar
TS
QUArTSSee Price Book page 97.
QUArT oF PAINT
QP
• Starlight, Cashmere and Snowdrift
QUArT oF STAIN
QST
QUArT oF CLEAr SEALEr ToP CoAT
QCST
Standard stain finishes include matching stain, paint, and clear sealer/topcoat. Glazed finishes require glaze to be applied over topcoat then second topcoat must be applied.
Starlight,Cashmere
and SnowdriftTopcoat
TOUCHUPSPRAY13 OZ
ToUCh-UP SPrAy CANSSee Price Book page 97.
TSCPTSCP-12
Touch Up Spray Can – Primer (13 Oz. spray can)
TSCTTSCT-12
Touch Up Spray Can – Topcoat(13 Oz. spray can)
Starlight,Cashmere
andSnowdriftPrimer
TOUCHUPSPRAY13 OZ
FILL STICkSee Price Book page 97.
FSFS-12
• Specify Finish• Each or 12 per carton
ToUCh-UP PENSee Price Book page 97.
TPTP-12
• Specify Finish• Each or 12 per carton• Standard finishes only• Not available in glazes
TOUCH UP PEN
TUK
• Kit includes 1-Fil Stick, 1-Touch-up Pen and 1-Blend• Specify finish• Standard finishes only• Not available in glazes
ToUCh-UP kITSee Price Book page 97.
yellowing: Use only materials provided by QualityCabinets. Other materials may match finish at time of application; however, a year later they may change in color. Materials supplied by QualityCabinets are color matched, formulated and tested for yellowing.
• Kit includes 1-13 oz. Can Touch-up primer, 1-13 oz. Can Touch-up topcoat, 1-4 oz. Can Soft Putty, 1-1 oz. Tube SeamFil, 1-Touch-up Marker, 1- Putty Fil Stick, 1-Piece 220 x Sand Paper and 3 page Instruction Sheet
• Specify color
PUTTySee Price Book page 97.
PUTTY
• 4 Oz. per jar• Available for Starlight, Cashmere and Snowdrift
Soft PuttyStarlight,Cashmere
and Snowdrift
CABINET CArE kITSee Price Book page 97.
CCK
CABINET CLEANING AND PoLIShING CLoThSee Price Book page 97.
CCPC
• 25 – 13" x 12" cleaning and polishing cloths
SCrEWS See Price Book page 97.
INSTALLSCREWS-100 • #10 x 2-1/2” No. 2 square drive washer head screw• Used to secure cabinets to the wall and face frames together• 100 screws per carton
INSTALLSCREWPW-6• #10 x 3-1/2” No. 2 square drive washer head screw• Used to secure Peninsular Wall (PW) cabinets to ceiling joists thru
the face frame rail• 6 screws per carton (enough for one typical cabinet installation)
• White Primer used for both Starlight, Cashmere and Snowdrift
CABINET DUSTING CLoThSee Price Book page 97.
CDC
• 6 – 17" x 12" dusting cloths specifically treated to pick up dust and hold the dust in the cloth
Kit includes the following items:• One 8 ounce squeeze bottle of
concentrated wood cleaner for cabinets/furniture. Add 4 ounces to one gallon of warm water
• One 8 ounce squeeze bottle of cabinet/ furniture polish and restorer
• Two 13" x 12" cleaning and polishing cloths to be used in conjunction with the polish and restorer solution
• One 17" x 12" dusting cloth specifically treated to pick up dust and hold the dust in the clothFILL STICK
WARNING: Review MSDS before use of all touch up materials
59
DovETAIL DrAWEr oPTIoN (SDS)• Undermount full extension drawer
glide system with soft close• 3/4” solid hardwood sides –
nominal 1/8” plywood bottom
PLyWooD ENDS (PSS)• Plywood ends are 3/8" thick 5 ply• "A" face, hardware veneer exterior• Base cabinet interior is Natural Maple laminate• Wall cabinet interior is Natural Maple laminate unless match-
ing interior option is selected• Not available in Starlight, Cashmere or Snowdrift• Not all cabinets can be made with plywood ends. Contact
your Customer Service representative for exceptions
SPECIAL DEPTh CABINETS:See Price Book page 106.
Wall Cabinets6”, 9”, 15”, 18”, 21” & 24” Note: Increase to 24” depth option isnot available on walls where an equivalent wall refrigerator (WR)size exists.
Bookcase Cabinets6”, 9”, 15”, 18”, 21” & 24”
Base Cabinets12”*, 15”*,18” and 21” (12” & 15” deep base or vanity cabinetsdo not have drawers and drawer stacks are not offered in 12” and15” reduced depths)
Tall Cabinets9”, 15” & 18”
UB Cabinets18”, 21” with drawers12”, 15”, 18” and 21” with full-height doors
vanity Cabinets: 12”, 15” (12” & 15” deep base or vanity cabinets do not havedrawers and drawer stacks are not offered in 12” and 15” reduceddepths)
NoTES• Not all wall, base, vanity, universal and tall cabinets can be
made in special depths. Contact your Customer Service Representative for exceptions.
• Replacement shelves are only available for cabinets 12”, 15" and 24” deep. Replacement shelves for special depth cabinets must be cut-to-size in the field from these three sizes.
• All special depth wall cabinets will be built with standard adjust-able shelving. For example, if the standard wall cabinet comes with an adjustable shelf (or shelves) then the special depth order will be produced with an adjustable shelf (or shelves).
• All special depth base cabinets will be built with standard adjust-able shelving. For example, if the standard base cabinet comes with an adjustable shelf then the special depth order will be pro-duced with an adjustable shelf.
• All special depth Utility cabinets will be built with standard adjustable shelving in the upper section. For example, if the standard Utility cabinet comes with an adjustable shelf (or shelves) in the upper section then the special depth order will be produced with an adjustable shelf (or shelves) in the upper section.
MoDIFICATIoNS
CABINET FroNTS oNLy (CFo)AVAILABLE IN STANDARD WALL, BASE, VANITY, AND TALL SIZESCabinet fronts are not available in all cabinets. Contact our CustomerService Department before ordering.
CASE oNLy (CSo)*• Case only option is not available in all cabinets. Contact your
Customer Service representative for exceptions
Walls• Includes shelves (if applicable)• Interior and shelves are natural Maple laminate or Starlight unless
matching interior option is selected• No doors or hinges
Bases, vanities, Talls, Universal• Includes cabinet box only• Does not include: doors, drawer fronts, drawer cores, hinges,
shelves, trays, guides, etc.• Interior of cabinet case is natural Maple laminate or Starlight
FrAME oNLy (FrM)*• Face frame only• Does not include doors, drawer fronts, hinges• Available in standard wall, base, vanity, universal and tall sizes• Cabinet face frames are not available in all cabinets. Contact your
Customer Service representative for exceptions* Note: See QualityPros for CASE ONLY and FRAME ONLY pricing.
MATChING INTErIor (MI):See Price Book page 106.
• Available for wall cabinets• Cabinet interior matches cabinet exterior• Shelves are 3/4" thick• Not available in Starlight or maple Natural
CoNSTrUCTIoN oPTIoNS:SDS = Standard Construction, Dovetail Drawers, Standard ShelvesSSS = Standard ConstructionPDS = Plywood Ends, Dovetail Drawers, Standard ShelvesPSS = Plywood Ends, Standard Drawers, Standard Shelves
PArTIAL CABINET oPTIoNS:See Price Book page 106.
UNFINIShED (UFNoN):See Price Book page 106.
• Select door styles are available unfinished: Quincy2, Jamestown2, Manchester2, Heritage2, Hancock2, Classic2 and Axiom2
• Unfinished is not available in all door styles and cabinets. Contact your Customer Service representative for exceptions
• Exterior of standard cabinet box is paper laminate. Color cannot be specified and may vary
* Note: See QualityPros for CASE ONLY and FRAME ONLY pricing.
CArToNING: FACE WrAP (F) / CArToN (C)See Price Book page 106.
• Select door styles and/or finishes are available face wrap• Not all cabinets are available face wrap• Contact your Customer Service representative for details
AX2.MP.B. UFNON .N.NNNN.PDS . S .F .W153006 L MICSO(Construction) (Carton/Facewrap) (Depth) (Matching Interior) (Partial Cabinet Option)
TrADITIoNAL ovErLAy/PrEP For INSErT DoorSSpecify L or R for arched styles. See Price Book pages 98-101.
60
• ChErry Door STyLES • MAPLE Door STyLES Classic2 Classic2 Heritage2 Heritage2 Nottingham2
• hICkory Door STyLES • MAPLE — rUSTIC Door STyLES Heritage2 Meriwether2 Nottingham2
• rED oAk Door STyLES Classic2 Heritage2
• Doors are shipped with appropriate number of hinges and mounting screws• GLASS (INSErT) IS NoT INCLUDED• Use clear silicone to install glass, not included • Prairie doors only available in square styles• Only upper doors in tall cabinets are available as Prep for Insert
Square StylesHeritage2 Meriwether2Nottingham2
MULLION
MorTISE & TENoN
MULLION
Arch StylesHeritage2Nottingham2
FRAME ONLY
Arch StylesHeritage2Nottingham2
FRAME ONLY
Square StylesHeritage2 Meriwether2Nottingham2
PRAIRIE
Square StylesHeritage2 Meriwether2Nottingham2
MULLION FRAME ONLY PRAIRIE
MITErED
Classic2 Classic2 Classic2
TrADITIoNAL ovErLAy — MULLIoN, FrAME, AND PrAIrIE Door CoNvErSIoN ChArT
U1590 PF1322 PM1322 not availableU159024 PF1322 PM1322 not availableU1596 PF1328 PM1328 not availableU159624 PF1328 PM1328 not availableU1884 PF1616 PM1616 PP1616U188424 PF1616 PM1616 PP1616U1890 PF1622 PM1622 PP1622U189024 PF1622 PM1622 PP1622U1896 PF1628 PM1628 PP1628U189624 PF1628 PM1628 PP1628U2484 PF2216 PM2216 PP2216U248424 PF2216 PM2216 PP2216U248424B * PF1116B PM1116B not available
CABINETPROD. CODE FRAME MULLION PRAIRIE
PW1830 * PF1628 PM1628 PP1628PW2124 * PF1922 PM1922 PP1922PW2130 * PF1928 PM1928 PP1928PW2424 * PF2222 PM2222 PP2222PW2424B ** PF1122B PM1122B not availablePW2430 * PF2228 PM2228 PP2228PW2430B ** PF1128B PM1128B not availablePW3018 ** PF1316 PM1316 not availablePW3024B ** PF1422B PM1422B not availablePW3030B ** PF1428B PM1428B not availablePW3618 ** PF1616 PM1616 PP1616PW3624 ** PF1622 PM1622 PP1622PW3630 ** PF1628 PM1628 PP1628PWA2430 † PF2128 PM2128 PP2128PWA2430 † PF1528WA PM1528WA not availablePWA2430B †* PF1028B PM1028B not availablePWA2430B † PF1528 PM1528 not availableU1584 PF1316 PM1316 not availableU158424 PF1316 PM1316 not available
CABINETPROD. CODE FRAME MULLION PRAIRIE
BK3018 * PF1416B PM1416B not availableBK3618 * PF1716B PM1716B PP1716BBK3624 * PF1722B PM1722B PP1722BBK3630 * PF1728B PM1728B PP1728BBKPWA2430 †* PF2128 PM2128 PP2128BKPWA2430 †* PF1528WA PM1528WA not availableOCU2784B * PF1316B PM1316B not availableOCU2790B * PF1322B PM1322B not availableOCU2796B * PF1328B PM1328B not availableOCU3084B * PF1416B PM1416B not availableOCU3090B * PF1422B PM1422B not availableOCU3096B * PF1428B PM1428B not availableOCU3384 * PF1516 PM1516 not availableOCU3390 * PF1522 PM1522 not availableOCU3396 * PF1528 PM1528 not availablePC3684B * PF1716B PM1716B PP1716BPC3690B * PF1722B PM1722B PP1722BPC3696B * PF1728B PM1728B PP1728BPW1824 * PF1622 PM1622 PP1622
CABINETPROD. CODE FRAME MULLION PRAIRIE
*Order 2 for cabinet **Order 4 for cabinet †Cabinet requires two sizes of Prep for Insert doors
61
TrADITIoNAL ovErLAy — MULLIoN, FrAME, AND PrAIrIE Door CoNvErSIoN ChArTSee Price Book pages 98-101.
* Order 2 for cabinet ** Order 4 for cabinet † Cabinet requires two sizes of Prep for Insert doors
U2484B * PF1116B PM1116B not availableU2490 PF2222 PM2222 PP2222U249024 PF2222 PM2222 PP2222U249024B * PF1122B PM1122B not availableU2490B * PF1122B PM1122B not availableU2496 PF2228 PM2228 PP2228U249624 PF2228 PM2228 PP2228U249624B * PF1128B PM1128B not availableU2496B * PF1128B PM1128B not availableU308424B * PF1416B PM1416B not availableU3084B * PF1416B PM1416B not availableU309024B * PF1422B PM1422B not availableU3090B * PF1422B PM1422B not availableU309624B * PF1428B PM1428B not availableU3096B * PF1428B PM1428B not availableU368424B * PF1716B PM1716B PP1716BU3684B * PF1716B PM1716B PP1716BU369024B * PF1722B PM1722B PP1722BU3690B * PF1722B PM1722B PP1722BU369624B * PF1728B PM1728B PP1728BU3696B * PF1728B PM1728B PP1728BUF1884 PF1616 PM1616 PP1616UF1890 PF1622 PM1622 PP1622UF1896 PF1628 PM1628 PP1628UF2484 PF2216 PM2216 PP2216UF2484B * PF1116B PM1116B not availableUF2490 PF2222 PM2222 PP2222UF2490B * PF1122B PM1122B not availableUF2496 PF2228 PM2228 PP2228UF2496B * PF1128B PM1128B not availableVLC1584 PF1316 PM1316 not availableVLC158418 PF1316 PM1316 not availableVLC1590 PF1322 PM1322 not availableVLC159018 PF1322 PM1322 not availableVLC1596 PF1328 PM1328 not availableVLC159618 PF1328 PM1328 not availableVLC1884 PF1616 PM1616 PP1616VLC188418 PF1616 PM1616 PP1616VLC1890 PF1622 PM1622 PP1622VLC189018 PF1622 PM1622 PP1622VLC1896 PF1628 PM1628 PP1628VLC189618 PF1628 PM1628 PP1628VLC2484 PF2216 PM2216 PP2216VLC248418 PF2216 PM2216 PP2216VLC248418B * PF1116B PM1116B not availableVLC2484B * PF1116B PM1116B not availableVLC2490 PF2222 PM2222 PP2222VLC249018 PF2222 PM2222 PP2222VLC249018B * PF1122B PM1122B not availableVLC2490B * PF1122B PM1122B not availableVLC2496 PF2228 PM2228 PP2228VLC249618 PF2228 PM2228 PP2228VLC249618B * PF1128B PM1128B not availableVLC2496B * PF1128B PM1128B not availableVLC308418B * PF1416B PM1416B not availableVLC3084B * PF1416B PM1416B not availableVLC309018B * PF1422B PM1422B not availableVLC3090B * PF1422B PM1422B not availableVLC309618B * PF1428B PM1428B not availableVLC3096B * PF1428B PM1428B not availableVLC368418B * PF1716B PM1716B PP1716BVLC3684B * PF1716B PM1716B PP1716BVLC369018B * PF1722B PM1722B PP1722BVLC3690B * PF1722B PM1722B PP1722BVLC369618B * PF1728B PM1728B PP1728BVLC3696B * PF1728B PM1728B PP1728BVW1230 PF1028 PM1028 not availableVWB2738B * PF1330B PM1330B not availableVWR1521 PF1319 PM1319 not availableVWR1530 PF1328 PM1328 not available
CABINETPROD. CODE FRAME MULLION PRAIRIE
W930 PF728 not available not availableW936 PF734 not available not availableW942 PF740 not available not availableW1230 PF1028 PM1028 not availableW1236 PF1034 PM1034 not availableW1242 PF1040 PM1040 not availableW1518 PF1316 PM1316 not availableW1530 PF1328 PM1328 not availableW1536 PF1334 PM1334 not availableW1542 PF1340 PM1340 not availableW1818 PF1616 PM1616 PP1616W1824 PF1622 PM1622 PP1622W1830 PF1628 PM1628 PP1628W1836 PF1634 PM1634 PP1634W1842 PF1640 PM1640 PP1640W2124 PF1922 PM1922 PP1922W2130 PF1928 PM1928 PP1928W2136 PF1934 PM1934 PP1934W2142 PF1940 PM1940 PP1940W2418 PF2216 PM2216 PP2216W2418B * PF1116B PM1116B not availableW2424 PF2222 PM2222 PP2222W2424B * PF1122B PM1122B not availableW2430 PF2228 PM2228 PP2228W2430B * PF1128B PM1128B not availableW2436 PF2234 PM2234 PP2234W2436B * PF1134B PM1134B not availableW2442 PF2240 PM2240 PP2240W2442B * PF1140B PM1140B not availableW2712B * PF1310B not available not availableW2715B * PF1313B PM1313B not availableW2724B * PF1322B PM1322B not availableW2730B * PF1328B PM1328B not availableW2736B * PF1334B PM1334B not availableW2742B * PF1340B PM1340B not availableW3012 * PF1310 not available not availableW3015 * PF1313 PM1313 not availableW3018 * PF1316 PM1316 not availableW3021 * PF1319 PM1319 not availableW3024B * PF1422B PM1422B not availableW3027B * PF1425B PM1425B not availableW3030B * PF1428B PM1428B not availableW3036B * PF1434B PM1434B not availableW3042B * PF1440B PM1440B not availableW3315 * PF1513 PM1513 not availableW3318 * PF1516 PM1516 not availableW3324 * PF1522 PM1522 not availableW3330 * PF1528 PM1528 not availableW3336 * PF1534 PM1534 not availableW3342 * PF1540 PM1540 not availableW3612 * PF1610 not available not availableW3615 * PF1613 PM1613 not availableW3618 * PF1616 PM1616 PP1616W3621 * PF1619 PM1619 PP1619W3624 * PF1622 PM1622 PP1622W3627 * PF1625 PM1625 PP1625W3630 * PF1628 PM1628 PP1628W3636 * PF1634 PM1634 PP1634W3642 * PF1640 PM1640 PP1640W3912 * PF1810 not available not availableW3915 * PF1813 PM1813 not availableW3918 * PF1816 PM1816 PP1816W3924 * PF1822 PM1822 PP1822W3930 * PF1828 PM1828 PP1828W3936 * PF1834 PM1834 PP1834W3942 * PF1840 PM1840 PP1840W4218 * PF1916 PM1916 PP1916W4224 * PF1922 PM1922 PP1922W4230 * PF1928 PM1928 PP1928W4236 * PF1934 PM1934 PP1934
CABINETPROD. CODE FRAME MULLION PRAIRIE
W4242 * PF1940 PM1940 PP1940W4530 * PF2128 PM2128 PP2128W4812 †* PF1310 not available not availableW4812 † PF1610 not available not availableW4818 * PF2216 PM2216 PP2216W4818B ** PF1116B PM1116B not availableW4824 * PF2222 PM2222 PP2222W4824B ** PF1122B PM1122B not availableW4830 PF2228 PM2228 PP2228W4830B ** PF1128B PM1128B not availableWA2430 PF1528WA PM1528WA not availableWA2436 PF1534WA PM1534WA not availableWA2442 PF1540WA PM1540WA not availableWA2730 PF1528WA PM1528WA not availableWA2736 PF1534WA PM1534WA not availableWA2742 PF1540WA PM1540WA not availableWBC24-2730 PF928 not available not availableWBC24-2736 PF934 not available not availableWBC24-2742 PF940 not available not availableWBC30-3318 PF1516 PM1516 not availableWBC30-3324 PF1522 PM1522 not availableWBC30-3330 PF1528 PM1528 not availableWBC30-3336 PF1534 PM1534 not availableWBC30-3342 PF1540 PM1540 not availableWBC33-3630 PF1828 PM1828 PP1828WBC36-3930B* PF1028B PM1028B not availableWBC36-3930 PF2128 PM2128 PP2128WBC36-3936B* PF1034B PM1034B not availableWBC36-3936 PF2134 PM2134 PP2134WBC36-3942B* PF1040B PM1040B not availableWBC36-3942 PF2140 PM2140 PP2140WBC48-5130† PF1528 PM1528 not availableWBC48-5130† PF1628 PM1628 PP1628WCA1230 PF1528 PM1528 not availableWCA1236 PF1534 PM1534 not availableWCA1242 PF1540 PM1540 not availableWEC1230 * PF728 not available not availableWEC1236 * PF734 not available not availableWEC1242 * PF740 not available not availableWMC2736B * PF1313B PM1313B not availableWMC3036B * PF1413B PM1413B not availableWMSC2730B * PF1310B not available not availableWMSC2736B * PF1313B PM1313B not availableWMSC3030 * PF1310 not available not availableWMSC3036 * PF1313 PM1313 not availableWMSC3042 * PF1316 PM1316 not availableWR1824 PF1622 PM1622 PP1622WR1830 PF1628 PM1628 PP1628WR2424 PF2222 PM2222 PP2222WR2424B * PF1122B PM1122B not availableWR2430 PF2228 PM2228 PP2228WR2430B * PF1128B PM1128B not availableWR2724B * PF1322B PM1322B not availableWR2730B * PF1328B PM1328B not availableWR3015 * PF1313 PM1313 not availableWR3024B * PF1422B PM1422B not availableWR3030B * PF1428B PM1428B not availableWR3315 * PF1513 PM1513 not availableWR3318 * PF1516 PM1516 not availableWR3324 * PF1522 PM1522 not availableWR3615 * PF1613 PM1613 not availableWR3618 * PF1616 PM1616 PP1616WR3624 * PF1622 PM1622 PP1622WR3915 * PF1813 PM1813 not availableWR3918 * PF1816 PM1816 PP1816WR3924 * PF1822 PM1822 PP1822
CABINETPROD. CODE FRAME MULLION PRAIRIE
FULL ovErLAy/PrEP For INSErT DoorSSpecify L or R for arched styles. See Price Book pages 102-105.
62
• ChErry Door STyLES • MAPLE Door STyLES Hancock2 Axiom2 Quincy2 Manchester2 Hancock2 Sableton2 Quincy2 Jamestown2 Sonnet2 Sonnet2 Manchester2 Westminster2 Provincial2 • rED oAk Door STyLES Hancock2 • LAMINATE Door STyLES • MAPLE — rUSTIC Door STyLES Nantucket2 Wayfarer2 Sussex2 • Doors are shipped with appropriate number of hinges and mounting screws• Glass (insert) is not included• Use clear silicone to install glass, not included • Prairie doors only available in square styles• Only upper doors in tall cabinets are available as Prep for Insert
BKPWA2430 † PF1529WA PM1529WA not available OCU2784B * PF1317B PM1317B not availableOCU2790B * PF1323B PM1323B not availableOCU2796B * PF1329B PM1329B not availableOCU3084B * PF1517B PM1517B not availableOCU3090B * PF1523B PM1523B not availableOCU3096B * PF1529B PM1529B not availableOCU3384 * PF1617 PM1617 PP1617
CABINETPROD. CODE FRAME MULLION PRAIRIE
*Order 2 for cabinet **Order 4 for cabinet †Cabinet requires two sizes of Prep for Insert doors
W4218 * PF2117 PM2117 PP2117W4224 * PF2123 PM2123 PP2123W4230 * PF2129 PM2129 PP2129W4236 * PF2135 PM2135 PP2135W4242 * PF2141 PM2141 PP2141W4530 * PF2229 PM2229 PP2229W4812 †* PF1511 not available not available
W4812 † PF1811 not available not availableW4818 * PF2417 PM2417 PP2417W4818B ** PF1217B PM1217B not availableW4824 * PF2423 PM2423 PP2423W4824B ** PF1223B PM1223B not availableW4830 * PF2429 PM2429 PP2429W4830B ** PF1229B PM1229B not availableWA2430 PF1529WA PM1529WA not availableWA2436 PF1535WA PM1535WA not availableWA2442 PF1541WA PM1541WA not availableWA2730 PF1529WA PM1529WA not availableWA2736 PF1535WA PM1535WA not availableWA2742 PF1541WA PM1541WA not availableWBC24-2730 PF1029 not available not availableWBC24-2736 PF1035 not available not availableWBC24-2742 PF1041 not available not availableWBC30-3318 PF1617 PM1617 PP1617WBC30-3324 PF1623 PM1623 PP1623WBC30-3330 PF1629 PM1629 PP1629WBC30-3336 PF1635 PM1635 PP1635WBC30-3342 PF1641 PM1641 PP1641WBC33-3630 PF1929 PM1929 PP1929WBC36-3930B * PF1129B not available not availableWBC36-3930 PF2229 PM2229 PP2229WBC36-3936B * PF1135B not available not availableWBC36-3936 PF2235 PM2235 PP2235WBC36-3942B * PF1141B not available not availableWBC36-3942 PF2241 PM2241 PP2241WBC48-5130 † PF1629 PM1629 PP1629
WBC48-5130 † PF1829 PM1829 PP1829WCA1230 PF1629 PM1629 PP1629WCA1236 PF1635 PM1635 PP1635WCA1242 PF1641 PM1641 PP1641WEC1230 * PF929 not available not availableWEC1236 * PF935 not available not availableWEC1242 * PF941 not available not availableWMC2736B * PF1314B PM1314B not availableWMC3036B * PF1514B PM1514B not availableWMSC2730B * PF1311B not available not availableWMSC2736B * PF1314B PM1314B not availableWMSC3030 * PF1511 not available not availableWMSC3036 * PF1514 PM1514 not availableWMSC3042 * PF1517 PM1517 not availableWR1824 PF1823 PM1823 PP1823WR1830 PF1829 PM1829 PP1829WR2424 PF2423 PM2423 PP2423WR2424B * PF1223B PM1223B not availableWR2430 PF2429 PM2429 PP2429WR2430B * PF1229B PM1229B not availableWR2724B * PF1323B PM1323B not availableWR2730B * PF1329B PM1329B not availableWR3015 * PF1514 PM1514 not availableWR3024B * PF1523B PM1523B not availableWR3030B * PF1529B PM1529B not availableWR3315 * PF1614 PM1614 not availableWR3318 * PF1617 PM1617 PP1617WR3324 * PF1623 PM1623 PP1623WR3615 * PF1814 PM1814 not availableWR3618 * PF1817 PM1817 PP1817WR3624 * PF1823 PM1823 PP1823WR3915 * PF1914 PM1914 not availableWR3918 * PF1917 PM1917 PP1917WR3924 * PF1923 PM1923 PP1923
CABINETPROD. CODE FRAME MULLION PRAIRIE
FULL ovErLAy — MULLIoN, FrAME, AND PrAIrIE Door CoNvErSIoN ChArTSee Price Book pages 102-105.
63
PWA2430B † PF1529WA PM1529WA not availableU1584 PF1517 PM1517 not availableU158424 PF1517 PM1517 not availableU1590 PF1523 PM1523 not availableU159024 PF1523 PM1523 not availableU1596 PF1529 PM1529 not availableU159624 PF1529 PM1529 not availableU1884 PF1817 PM1817 PP1817U188424 PF1817 PM1817 PP1817U1890 PF1823 PM1823 PP1823U189024 PF1823 PM1823 PP1823U1896 PF1829 PM1829 PP1829U189624 PF1829 PM1829 PP1829U2484 PF2417 PM2417 PP2417U248424 PF2417 PM2417 PP2417U248424B * PF1217B PM1217B not availableU2484B * PF1217B PM1217B not availableU2490 PF2423 PM2423 PP2423U249024 PF2423 PM2423 PP2423U249024B * PF1223B PM1223B not availableU2490B * PF1223B PM1223B not availableU2496 PF2429 PM2429 PP2429U249624 PF2429 PM2429 PP2429U249624B * PF1229B PM1229B not availableU2496B * PF1229B PM1229B not availableU308424B * PF1517B PM1517B not availableU3084B * PF1517B PM1517B not availableU309024B * PF1523B PM1523B not availableU3090B * PF1523B PM1523B not availableU309624B * PF1529B PM1529B not availableU3096B * PF1529B PM1529B not availableU368424B * PF1817B PM1817B PP1817BU3684B * PF1817B PM1817B PP1817BU369024B * PF1823B PM1823B PP1823BU3690B * PF1823B PM1823B PP1823BU369624B * PF1829B PM1829B PP1829BU3696B * PF1829B PM1829B PP1829BUF1884 PF1817 PM1817 PP1817UF1890 PF1823 PM1823 PP1823UF1896 PF1829 PM1829 PP1829UF2484 PF2417 PM2417 PP2417UF2484B * PF1217B PM1217B not availableUF2490 PF2423 PM2423 PP2423UF2490B * PF1223B PM1223B not availableUF2496 PF2429 PM2429 PP2429UF2496B * PF1229B PM1229B not availableVLC1584 PF1517 PM1517 not availableVLC158418 PF1517 PM1517 not availableVLC1590 PF1523 PM1523 not availableVLC159018 PF1523 PM1523 not availableVLC1596 PF1529 PM1529 not availableVLC159618 PF1529 PM1529 not availableVLC1884 PF1817 PM1817 PP1817VLC188418 PF1817 PM1817 PP1817VLC1890 PF1823 PM1823 PP1823VLC189018 PF1823 PM1823 PP1823VLC1896 PF1829 PM1829 PP1829VLC189618 PF1829 PM1829 PP1829VLC2484 PF2417 PM2417 PP2417VLC248418 PF2417 PM2417 PP2417VLC248418B * PF1217B PM1217B not availableVLC2484B * PF1217B PM1217B not availableVLC2490 PF2423 PM2423 PP2423VLC249018 PF2423 PM2423 PP2423VLC249018B * PF1223B PM1223B not availableVLC2490B * PF1223B PM1223B not availableVLC2496 PF2429 PM2429 PP2429VLC249618 PF2429 PM2429 PP2429VLC249618B * PF1229B PM1229B not availableVLC2496B * PF1229B PM1229B not availableVLC308418B * PF1517B PM1517B not availableVLC3084B * PF1517B PM1517B not availableVLC309018B * PF1523B PM1523B not availableVLC3090B * PF1523B PM1523B not availableVLC309618B * PF1529B PM1529B not availableVLC3096B * PF1529B PM1529B not available
CABINETPROD. CODE FRAME MULLION PRAIRIE
VLC368418B * PF1817B PM1817B PP1817BVLC3684B * PF1817B PM1817B PP1817BVLC369018B * PF1823B PM1823B PP1823BVLC3690B * PF1823B PM1823B PP1823BVLC369618B * PF1829B PM1829B PP1829BVLC3696B * PF1829B PM1829B PP1829BVW1230 PF1229 PM1229 not availableVWB2738B * PF1331B PM1331B not availableVWR1521 PF1520 PM1520 not availableVWR1530 PF1529 PM1529 not availableW930 PF929 not available not availableW936 PF935 not available not availableW942 PF941 not available not availableW1230 PF1229 PM1229 not availableW1236 PF1235 PM1235 not availableW1242 PF1241 PM1241 not availableW1518 PF1517 PM1517 not availableW1530 PF1529 PM1529 not availableW1536 PF1535 PM1535 not availableW1542 PF1541 PM1541 not availableW1818 PF1817 PM1817 PP1817W1824 PF1823 PM1823 PP1823W1830 PF1829 PM1829 PP1829W1836 PF1835 PM1835 PP1835W1842 PF1841 PM1841 PP1841W2124 PF2123 PM2123 PP2123W2130 PF2129 PM2129 PP2129W2136 PF2135 PM2135 PP2135W2142 PF2141 PM2141 PP2141W2418 PF2417 PM2417 PP2417W2418B * PF1217B PM1217B not availableW2424 PF2423 PM2423 PP2423W2424B * PF1223B PM1223B not availableW2430 PF2429 PM2429 PP2429W2430B * PF1229B PM1229B not availableW2436 PF2435 PM2435 PP2435W2436B * PF1235B PM1235B not availableW2442 PF2441 PM2441 PP2441W2442B * PF1241B PM1241B not availableW2712B * PF1311B not available not availableW2715B * PF1314B PM1314B not availableW2724B * PF1323B PM1323B not availableW2730B * PF1329B PM1329B not availableW2736B * PF1335B PM1335B not availableW2742B * PF1341B PM1341B not availableW3012 * PF1511 not available not availableW3015 * PF1514 PM1514 not availableW3018 * PF1517 PM1517 not availableW3021 * PF1520 PM1520 not availableW3024B * PF1523B PM1523B not availableW3027B * PF1526B PM1526B not availableW3030B * PF1529B PM1529B not availableW3036B * PF1535B PM1535B not availableW3042B * PF1541B PM1541B not availableW3315 * PF1614 PM1614 not availableW3318 * PF1617 PM1617 PP1617W3324 * PF1623 PM1623 PP1623W3330 * PF1629 PM1629 PP1629W3336 * PF1635 PM1635 PP1635W3342 * PF1641 PM1641 PP1641W3612 * PF1811 not available not availableW3615 * PF1814 PM1814 not availableW3618 * PF1817 PM1817 PP1817W3621 * PF1820 PM1820 PP1820W3624 * PF1823 PM1823 PP1823W3627 * PF1826 PM1826 PP1826W3630 * PF1829 PM1829 PP1829W3636 * PF1835 PM1835 PP1835W3642 * PF1841 PM1841 PP1841W3912 * PF1911 not available not availableW3915 * PF1914 PM1914 not availableW3918 * PF1917 PM1917 PP1917W3924 * PF1923 PM1923 PP1923W3930 * PF1929 PM1929 PP1929W3936 * PF1935 PM1935 PP1935W3942 * PF1941 PM1941 PP1941
CABINETPROD. CODE FRAME MULLION PRAIRIE
* Order 2 for cabinet ** Order 4 for cabinet † Cabinet requires two sizes of Prep for Insert doors
64
FrAMED CABINET DIMENSIoNS
30"
BASE DOOR / DRAWER
2 SHELVES
2 SHELVES
36"
DESK DRAWER 21" DEEP
341/2"
TRADITIONAL OVERLAY VERTICAL REVEAL
OVERLAY
DOOR/DRAWERREVEAL
CABINETFRAME
STILE
FULL OVERLAYHORIZONT AL REVEAL
CABINET FRAMECROSS–RAIL
OVERLAYDOOR/DRAWER
REVEAL
29"
24"
BASE CABINETEND VIEW
247/32"
BASE DOUBLEFACED CABINET
END VIEW
PENINSULA WALL CABINET
END VIEW
WALL CABINETEND VIEW
121/16"12"
BASE 4 DRAWERS
BASE CABINETS
3 SHELVES
42"
WALL CABINETS
201/2"
NO SHELF
27"
ONE SHELF
231/2"
ONE SHELF
18"
NO SHELF
12"
NO SHELFNO SHELF
15"
BATH CABINET
311/2"or 341/2"
12", 21", 24"
TALL CABINETEND VIEW
12", 16", 18", 21"
BATH CABINETEND VIEW
84"
96"
TALL CABINETS BATH CABINETS
30"
66"
TALL CABINET
96"
90"
24"
TALL CABINET
66"
84"
18"
TALL CABINET
66"
90"
65
FACE FrAME oPENING DIMENSIoNS
Notes:1. * Vertical face frame opening size.2 All end stiles are 11/2" wide except for Oven Cabinets (3") and 591/2" wide bath cabinets (17/8").3. All rails are 11/2" wide except as noted in the illustrations above.4. Double door wall and base dimesions are shown with a 3" wide center stile. See individual cabinet specifications for exceptions: i.e. butt door cabinets.5. Shelves and roll-out trays not shown.6. See Wall Blind Corner Details on page 16 for WBC face frame opening dimensions.7. See Base Blind Corner Details on page 25 for BBC face frame opening dimensions.8. See Oven Cabinet Cutout Dimensions on page 28 for OCU face frame opening dimensions.9. Specifications subject to change without notice.
DKDT Cabinet
41⁄2" 41⁄2"
53⁄16" 11⁄16"*3"
Base Four Drawer
*5"
30"
41⁄2"
*43⁄4"
*43⁄4"
*8"
Desk Drawer
41⁄2"
*5"
*5"
*8"
2"241⁄2"
File Drawer
41⁄2"
*5"
241⁄2"*15"
Vanity Drawer
41⁄2"
*5"
27" *8"
*8"
*5"
*8"
*8"
27"
51⁄2"
UBD-3D Cabinet
*157⁄8"
*95⁄8"
30"
41⁄2"
BMC Cabinet
12"15"18"201⁄2"231⁄2"27"30"36"42"
Wall Cabinets
*9"*12"*15"
*171⁄2"*201⁄2"*24"*27"*33"*39"
3"
Base Cabinet
3"
*5"
30"*201⁄2"
41⁄2"
Base Three Drawer
*5"
30"
41⁄2"
*93⁄8"
*95⁄8"
Base Full Height
30"
41⁄2"
30"
41⁄2"
*27"
*171⁄2"
DSB Cabinet
*43⁄4"61⁄2"
DKDDT Cabinet
84" Tall PC/U/VLC Cabinets
90" Tall PC/U/VLC Cabinets
96" Tall PC/U/VLC Cabinets
3"
2"
*27"
911⁄2"
*591⁄2"
41⁄2"
851⁄2"
*591⁄2"
41⁄2"
21⁄2"
*201⁄2" 3"3"
2"
791⁄2"
*591⁄2"
41⁄2"
*15"
*39"
*18"
60" Tall BK Cabinet
60"
*761⁄2"791⁄2"
41⁄2"
Tall BK Cabinets
911⁄2" *881⁄2"
*12"
WMC Cabinets
*13"
36"
*153⁄4"
*9"
WMSC Cabinets
30"36"
*12"
*183⁄4"
*15"
*213⁄4"
42"
*5"
*8"
*8"
27"
41⁄2"
VCD Drawer Right Cabinet
*24"
30"
41⁄2"
VCD6035BFH Cabinet
*27"
*5"
*43⁄4"
*8"
*43⁄4"
591⁄2"
Vanity Top Drawer
41⁄2"
*5"
27"*171⁄2"
66
QUALITyCABINETSQualityCabinets™ cabinetry make better use of nature’s hardwood, while providing a quality product.The wide range of wood colors and grain variations are natural characteristics of the wood and not a defect.
CABINET FrAMES3/4” thick, kiln dried, solid hardwood joined with mortise and tenon or dowel construction.
END PANELS3/8” thick industrial grade engineered wood is permanently finished on 2 sides with a laminate resistant to water and most household chemicals. End panels are machined to accept tops, bottoms, and backs. Ends are drilled to accept adjustable shelves.
oPTIoNAL PLyWooD END PANELS3/8”, “A” face, hardwood veneer exterior. Tall cabinet panels are 1/2” thick. Finished to match cabinet exterior. Interior is permanently laminated with laminate resistant to water and most household chemicals. (Starlight, Cashmere and Snowdrift cabinetry is not available with plywood end panels.)
CABINET ToPS AND BoTToMS1/2” thick industrial grade engineered wood is permanently finished on 2 sides with a laminate resistant to water and most household chemicals.
FLoorS1/2” thick industrial grade engineered wood is permanently finished on 1 side with a laminate resistant to water and most household chemicals.
ShELvES5/8” thick industrial grade engineered wood is permanently finished on 2 sides for full depth shelves and 1 side for half-depth base cabinet shelving with a laminate resistant to water and most household chemicals. Front edge is edge banded with melamine banding. Wall and Base cabinets have adjustable shelves supported by adjustable shelf clips.
Shelves in base cabinets 27” wide and wider have a matching full-length support apron secured to the underside near the front edge for additional support.
BookCASE ShELvES3/4” thick engineered wood, permanently laminated two sides to match exterior finish of cabinet. All bookcase units have adjustable shelves. Front edge is edge banded.
WALL BACkS3/8” thick engineered wood finished on one side with a laminate resistant to water and household chemicals. Full-length dadoes in back allow tops and bottoms to be captured, stapled and glued.
BASE BACkS1/4” thick engineered wood finished on one side with a laminate resistant to water and household chemicals. Extends full-length to floor.
WALL hANGrAILS3/8” thick engineered wood full-length across top and bottom secured with staples.
BASE hANGrAILS11/16” solid pine or Douglas-fir. Ends are rabbeted to join cabinet ends. Bottom edge is rabbeted to join back.
DrAWEr GUIDES75 pound rated drawer guide system, side mounted, 3/4 extension with self adjusting mounting brackets at rear. Drawer slides are fastened to the drawer box with screws.
DrAWEr FroNTS3/4” solid hardwood on all wood styles. Laminate and substrate on laminate drawer fronts use the same materials as corresponding door style. 5 Piece fronts have 3/4” thick stiles and rails.
DrAWEr BoX1/2” thick sides, fronts and backs of industrial grade engineered wood. Top edges are finished with melamine banding. Side surfaces are finished with a laminate resistant to water and most household chemicals. 1/4” thick engineered wood bottom panel is finished on one side with same laminate. Laminate/edgebanding finish is Natural Maple.
Drawer sides are rabbeted to join the drawer box fronts and backs. Each corner is joined with white glue and pinned.
oPTIoNAL DovETAIL WooD DrAWEr WITh UNDErMoUNT GUIDE SySTEM3/4” sides, fronts and backs are solid hardwood. Drawer sides, fronts and backs are joined with half blind dovetail joints.
Nominal 1/8” plywood drawer bottom is laminate surface for easy cleaning. Drawer bottom is joined to the drawer sides, front and back on all 4 sides with a groove.
Hardwood drawer components are finished with clear sealer and topcoat.
Full extension soft close undermount guide system is concealed, self closing and can be adjusted to align the drawer head.
ToEkICk1/2” thick industrial grade engineered wood. Toekick extends from floor to bottom of cabinet, closing the toe kick area. Toekick cover is required and sold separately.
hINGESTraditional overlay door styles come with fully concealed European style hinges that feature 105° opening, 6-way adjustment, and a self closing feature.
Full overlay door styles come with fully concealed European style hinges that feature 107° opening, 6-way adjustment, and a self closing feature.
Some corner cabinets using concealed hinges will have hinges with wider opening capability for improved access.
STArLIGhT FINIShStarlight components have two coats of primer applied. They are oven-cured and sanded. Starlight topcoat is applied and oven cured. (All QualityCabinet finishes are formulated to resist yellowing - all finishes change with time - exposure to sunlight causes premature aging). To prevent discoloration of finish, protection from appliance heat is important. NoTE: Self cleaning ovens generate high temperatures
WooD FINIShESWood component surfaces are sanded to begin the finishing process. Stain is applied and oven cured. A sealer coat is applied, oven cured and sanded. A high solids, top coat is applied. Each component is individually inspected prior to release from the finishing department. The conversion varnish topcoat is formulated to minimize the effects of ultraviolet on the finish.
MATChING INTErIorSWall cabinets are available with the interior color matching the exterior color. Matching interiors is an option and designated when ordering cabinets. Our exception is the standard for cabinets finished in Starlight; this color does not need an interior option, as they ship with matching interiors and 5/8” shelves. Matching interiors for other finishes have 3/4” thick shelves. Up charge applies for “MI”.
CErTIFIED CABINET AND FACILITyQualityCabinets™ cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86. QualityCabinets demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Programcertification, administered by the KCMA. All QualityCabinets facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.
CABINET SPECIFICATIoN DETAILS
67
IMPorTANT ProDUCT ADvISorIES FINIShQualityCabinets uses finishes that protect and enhance the natural beauty of wood. Extra care is taken to assure a uniform finish. Because we are dedicated to customer satisfaction, we feel that it is important to explain some of the characteristics of QualityCabinets finishes on hardwood.
Like fingerprints, characteristic differences in color and grain are produced by nature in every tree. These variations are what create the beauty and interest found in the wood. The variations in color, grain and texture will cause variation in the finish, even though identical finishing processes are applied. These variations are considered a natural characteristic of hardwood and are not a defect. We hope that you will appreciate and enjoy this beauty.
ChErry FINIShES
Please note that Cherry hardwood is sensitive to light and the color naturally deepens as it ages.
Amber–Amber is a translucent finish that emphasizes character, natural variations in color, and grain of the natural Cherry hardwood. Your finish may vary from samples that have been exposed to light.
Amber/Mocha–Available in Cherry glaze-able door styles only; Amber finish is highlighted with a medium brown glaze.
Burgundy–This finish has been discontinued as of 2/28/14.
Burgundy/Licorice–This finish has been discontinued as of 2/28/14.
Brandy–Brandy is a medium brown, multiple step stain, which showcases the dramatic grain patterns of Cherry hardwood. The color variations of the solid hardwood typify the natural characteristics. Your finish may vary from any samples that have been exposed to light.
Brandy/Licorice–Available in cherry glaze-able door styles only; Brandy finish is highlighted with a deep brown glaze.
hICkory FINIShES
Autumn–Autumn is a medium color stain finish. The dramatic variations of the Hickory are slightly blended in this distinctive finish. The natural variations of the wood are blended to give a look that only real Hickory can provide. The character variation and wood color variation are natural characteristics of the hardwood and are considered features of this finish. A single door sample in Hickory may not be a good sampling of the variations you may expect in an entire kitchen.
Natural–This natural finish accents the dramatic characteristics, variations in grain pattern, and wood color of the natural hardwood.
A single door sample will not be a good example of all the variations this finish may offer in variety and contrast. The wide range of character and variations in the Hickory hardwood are considered features of this natural finish and are not defects.
Palomino–Prominent variations in Hickory allow this semi-transparent stain to range from a light brindle to a chocolate.
rED oAk FINIShES
Espresso–Dark semi-transparent finish
Harvest–Light translucent finish that features the color range and grain patterns found in the natural wood. All variations in the wood are enhanced to create the warm natural look of the Harvest finish. Noticeable grain and color variations are inherent characteristics of this finish.
Royal–Medium stain color. This finish features the bold look of the wood grain. The medium color blends many of the wood colors but allows the bolder variations of the natural wood color to create a beautiful finish.
MAPLE FINIShES
Biscotti–A cool, neutral brown semi-transparent finish.
Biscotti/Mocha–Available in Maple glaze-able door styles only; Biscotti finish highlighted with a medium brown glaze.
Butterscotch–Light translucent no-wipe stain that features the natural look of hard Maple. The stain color lightly blends the natural color range and grain variation of the wood. This finish contains noticeable grain and color variations.
Butterscotch/Mocha–Available in Maple glaze-able door styles only; Butterscotch finish is highlighted with a medium brown glaze.
Café–A rich medium brown finish that draws out the grain characteristics of hard Maple. This finish contains some grain and color variations which adds to its beauty.
Café/Licorice–Available in Maple glaze-able door styles only; Café finish is highlighted with a deep brown glaze.
Cashmere– Available in Maple. A warm cream painted finish.
Cashmere/Auburn– Available in Maple glaze-able door styles only; Cashmere painted finish is highlighted with a redish brown glaze.
Cordovan–Dark rich stain on hard Maple. The full range of the wood color is blended to make a beautiful finish. Noticeable color variations in the grain are a characteristic that is highlighted by the hand wiped stain. These characteristics are natural and exhibit the beauty of Maple.
Cordovan/Licorice–Available in Maple glaze-able door styles only; Cordovan finish is highlighted with a deep brown glaze.
Dulce–Dark semi-transparent finish
Natural–This finish consists of a clear sealer and topcoat that is applied directly to the wood without stain. The variations in grain, character and wood color are highlighted with this finish. The natural variations in the wood are considered a feature of this finish and are not a defect.
Praline–Light-medium finish that blends color with the natural hardwood colors. The finish process reduces the variation of wood colors and minimizes color contrast in the finished product. The natural wood grain and natural character continue to give the “real wood” look blended by the stain color.
Praline/Mocha–Available in Maple glaze-able door styles only; Praline finish is highlighted with a medium brown glaze.
Shadow–A sheer, rich grey stain that enhances the beauty of the woodgrain. Available on select Maple door styles.
Snowdrift–Creamy white painted finish. Available on select Maple door styles.
STArLIGhT, CAShMErE or SNoWDrIFTSolid color finishes have certain characteristics that need to be understood. A complete understanding is important before purchasing Starlight, Cashmere or Snowdrift cabinets.
All solid wood products experience dimensional change. Wood readily exchanges moisture with the surrounding atmosphere. In high humidity, wood picks up moisture and swells. In low humidity, wood releases moisture and shrinks.
QualityCabinets wood products use only materials that have been dried to an appropriate moisture content. As normal minor fluctuations in humidity occur, the resulting dimensional changes will be insignificant. However, as normal wood movement occurs some compression and separation will occur at the joints. When solid light colors are used, this movement will result in cracks at the joints. This is considered a natural characteristic of solid color finishes on wood. These cracks are not considered to be defects.
Manufacturer is not responsible for damage caused by improper humidity exposure after delivery to customer or contractor.
68
IMPorTANT ProDUCT ADvISorIES
QualityCabinets is proud to offer this attractive product. A single door may not show all the variances that are possible in a full kitchen. To avoid any misunderstanding, QualityCabinets urges all sales personnel to make sure the characteristics of the materials used are made clear to their buyers.
WARNING: This product contains chemicals known to the State of California to cause cancer.
WooD ChArACTErISTICS NoTICE
WooD ProDUCTS
WArPING, CrACkING & ProPEr hUMIDITy
As a natural characteristic, all wood products contain moisture. Changes in temperature and humidity affect the moisture content in wood, which causes wood to expand or contract. Over time, this expansion or contrac-tion can cause warping and joint cracks to occur, potentially causing permanent deformations, in wood cabinetry.
To help prevent excessive movement in your wood cabinetry, we recommend maintaining a controlled environment of 70 degrees to 75 degrees Fahrenheit and 30% to 50% humidity in the areas where your cabinetry is stored or installed. Environmental conditions cannot be controlled by Masco Cabinetry and the effects of movement in wood is not considered to be a manufacturing defect and will not be considered as a reason for replacement.
WEIGhT LIMITATIoNS For CABINETS
QualityCabinets™ products are certified by the Kitchen Cabinet Manufacturers Association (KCMA) Cabinet Certification Program and meet or exceed the American National Standards Institute, ANSI 161.1 standards established for kitchen cabinets.
Cabinet certification tests include loading all cabinet shelves with 15 pounds per square foot (not to exceed 45 lbs. per shelf) for a specified period of time.
The time weighted loading is
followed by an examination of the shelves and the joining of the cabinet for any evidence of movement or structural failure. QualityCabinets products meet or exceed these tests.
INSTALLATIoN & CABINET PErForMANCE
Cabinets must be set plumb for doors, drawers, and other components to function properly. Cabinets that are not plumb may experience doors or drawers that are uneven, crooked, or appear warped. These may be adjusted to improve appearance. However, if the cabinet is not plumb, uneven force is placed on the cabinet hardware, components and cabinet joints. Properly plumbed cabinets distribute forces evenly to the cabinet components and joining.
Failure to properly plumb a cabinet will cause uneven distribution of force on cabinet hardware, components and cabinet joints, which can lead to premature wear, cracking and even joint failure.
If a cabinet is installed on a wall or other surface that is not plumb, it is important that the cabinet be set plumb and that shims be used to fill any voids between the cabinet and the wall, at the point that the cabinet is fastened to the wall (soffit, ceiling or any other surface). Shims should be fitted before the fastener is tightened completely.
This will ensure that the cabinet components and cabinet joints
are not damaged or separated by tightening a fastener and forcing a cabinet component into a void between the cabinet and an uneven surface.
Proper cabinet installation is very important for the operation of the cabinet, cabinet hardware, cabinet components, and any accessory that may be installed in the cabinet. Cabinet appearance, cabinet performance, hardware performance, accessory performance, and the expected life of all of the above may be significantly affected by proper or improper installation.
Cabinets up to 18” wide: Screw a top and bottom wall attachment screw into one wall stud and face frame to one adjacent cabinet.
Cabinets 21” through 39” wide: Screw top and bottom wall attachment screws into two wall studs and face frame to one adjacent cabinet.
Screw top and bottom wall attachment screws into three wall studs or use wall anchors or toggle bolts if three wall studs are not present.
QUALITy CABINETS
FIvE-yEAr LIMITED WArrANTyMasco Cabinetry LLC, is proud of our products and stand behind our quality and workmanship.
As with other natural materials, wood is affected by environmental factors such as natural and artificial lighting, moisture and relative humidity. Darkening or mellowing of the wood can be expected and is a natural part of wood as it ages. Each wood specie also exhibits its own distinctive patterns and characteristics that add to its natural beauty. These variations in color and characteristics are not considered imperfections or defects. This warranty does not cover the natural aging and darkening of wood color, nor does it apply to the inherent growth characteristics of wood. Please review and abide by all storage and installation instructions.
WArrANTy PErForMANCEShould any of the Products prove defective or deficient under normal use during the period of five years from date of purchase from an authorized dealer; the defective parts will at our option either be repaired or replaced. In keeping with our continuous product improvement policy, we reserve the right to replace defective parts with parts of equal or greater value.
WArrANTy CovErAGEQualityCabinets products, manufactured and assembled by Masco Cabinetry LLC and purchased from an authorized dealer (“Products”), are warranted to the original purchasing consumer for a period of FIVE YEARS from the date of purchase against defective materials or workmanship. This warranty is not transferable.
This warranty does not cover removal, installation, labor or transportation costs to Masco Cabinetry LLC of the defective Products. Nor does this warranty cover any product used or installed in connection with the cabinets or cabinetwork, such as plumbing fixtures, gas or electrical appliances, or countertops. We shall provide for the cost of the return shipment of repaired or replacement Products to the consumer, if deemed necessary. This warranty does not apply to damages or defects related to improper handling, storage, misuse, alterations, installation or Product used for any purpose other than normal use. Slight color variations for repair or replacement parts and color variations that may occur over time are not considered defects or deficiencies under this warranty.
TO THE EXTENT PERMITTED BY LAW, MASCO CABINETRY LLC SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCTS, CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES RESULTING FROM THE USE, INSTALLATION, PERFORMANCE OR FAILURE OF ANY PRODUCTS. Some provinces and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
TO THE EXTENT PERMITTED BY LAW, ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. Some provinces and some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and from province to province.
WArrANTy CLAIMSTo submit a warranty claim, please write a letter explaining the defect with a copy of your proof of purchase to:
QualityCabinetsWarranty DepartmentP.O. Box 1946Adrian, MI 49221
Masco Cabinetry LLC is not responsible for merchandise returned to it without proper written authorization from us.
Learn more about planningand visit the Idea Gallery atwww.QualityCabinets.com
Quality Series and Designer SeriesQualityCabinets offers a 5-Year Limited Warranty from the date of purchase. Full warranty details are available from your dealer or at www.QualityCabinets.com.
Base Cabinets1. Constructed for daily use (⅜” thick end panelsattached with wood-to-wood glue and staples)
2. Moisture resistant (natural maple laminate interiors)
4. Reinforced components (¼” thick engineered wood back extends all the way to the floor for added strength to help reinforce back corners of the cabinet)
5. Overall strength (solid pine or Douglas fir hang rails provide greater rigidity)
6. 6-way, fully concealed, adjustable hinges (in both Quality and Designer Series)
7. Structurally square design (four ½” thick engineered woodgussets help keep cabinet square and are dado cut into the side panels to improve the strength of the cabinet)
8. More storage (30% more volume, ½” thick engineered wooddrawers feature natural colored maple laminate interiors)
9. Better alignment (dual-captured, self-aligning white drawer guides are side-mounted and hold up to 75 lbs.)
10. Sturdy under-shelf support (locking shelf clips help hold shelf securely; cabinets 27” and wider also have support cleats as shown)
11. Strong shelves (⅝” thick engineered wood; natural maple in color makes the use of shelf paper optional)