W A S H W A R E E S S E N T I A L S L T D...O U T A C O M M E R C I A L W A S H R O O MPhone: 01275 338064 S U P P L I E D A T T H E R I G H T P R I C E O N T I M E Web: E-mail:...

E V E R Y T H I N G Y O U N E E D T O F I T

O U T A C O M M E R C I A L W A S H R O O M

S U P P L I E D A T T H E R I G H T P R I C E O N

T I M E

W A S H W A R E E S S E N T I A L S L T D

Stainless Steel Wash Trough Taplanding Type 400mm Projection

Product Code WTA

Material Manufactured from 1.6mm thick stainless steel with a satin

polish finish.

Length The wash trough is available to order online and held in stock in

four standard lengths: 1200, 1500, 1800, and 2400 mm.

Fixing The wash troughs come complete with integral stainless steel

wall fixing brackets at each end. The integral splashback is

pierced for screw fixing along the top edge. Optional stainless

steel front support legs.

Waste Outlet

The wash troughs are supplied with a centre 38 mm (1 1/2”) BSP

unslotted flush grated waste fitting.

Dimensions 400mm front to back.

150mm deep with 75mm high integral splashback

Tap Holes

The wash troughs can be supplied with tap holes to suit your

requirements. Please specify when ordering.

Optional Extras Stainless steel front support legs.

Taps, valves and spouts.

Phone: 01275 338064

Web: www.washwareessentials.co.uk

E-mail: [email protected]

W A S H W A R E

E S S E N T I A L S L T D

We also supply: stainless steel urinals, stainless steel & china toilets,

drinking fountains and water coolers, wash troughs and wash basins, hospital

sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering

sinks & tables, washroom accessories, Armitage Shanks DocM packs and

disabled use WC pans, solid surface wash troughs and basin units.

Please contact us for prices on any of your requirements.

Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN

Click here to visit Washware Essentials website

Phone: 01275 390603



Taps shown for illustration purposes only

https://www.washwareessentials.co.uk




T I M E


Stainless Steel Compact Wash Trough

Product Code CWT

Compact wash troughs are manufactured with a short 325mm

projection for ease of access to the taps, areas with limited

access, and have a rounded front edge and folded edges for

safety. Manufactured from 1.6mm thick stainless steel with a satin

finish.

Length The compact wash trough is available to order online in five lengths:

1200mm, 1500mm, 1800mm, 2100mm and 2400 mm. Other sizes

are available on request.

Fixing The wash troughs come complete with integral stainless steel wall

fixing brackets at each end. The rear upstand is pierced for screw

fixing along the top edge. Optional stainless steel front support legs

are available.

Waste Outlet

The compact wash troughs are supplied with a centre 38 mm

(1 1/2”) BSP unslotted flush grated waste fitting.


150mm deep with 75mm high rear upstand.

Tap Holes

The compact wash troughs can be supplied with tap holes to suit

your requirements. Please specify when ordering.



Plastic 38mm bottle trap.

Chrome plated bottle trap with waste pipe and wall flange.

Phone: 01275 338064



W A S H W A R E








Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603



Shown with optional soft touch time flow taps.





T I M E


Stainless Steel Wash Trough Splashback Type 375mm Projection

Product Code WTB

Material Manufactured from 1.2mm thick stainless steel with a satin finish.

Length The wash trough is available to order online in seven standard

lengths: 1200, 1500, 1800, 2100, 2400, 2700, and 3000mm.

The wash troughs can also be made to any length up to and

including 3300mm.

Fixing The wash troughs are manufactured with integral wall fixing

brackets and the integral splashback is pierced with screw holes.

Optional front support legs available.

Waste Outlet

The wash troughs are supplied with a 38 mm (1 1/2”) BSP

unslotted flush grated waste fitting positioned left, right, or

centrally.



Tap Holes The wash troughs are designed for the use of bib taps mounted

onto the rear wall.



Separate stainless steel splashback 300mm high.

Phone: 01275 338064



W A S H W A R E









Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN

Phone: 01275 390603







T I M E



Product Code WTC


finish.

Length The wash trough is available to order online in seven

standard lengths: 1200, 1500, 1800, 2100, 2400, 2700, and

3000mm.


including 3300mm.

Fixing The wash troughs are supplied with integral wall fixing rackets.

Waste Outlet



centrally.

Dimensions 450mm front to back as standard but they can be made to

300mm, 350mm and 400mm front to back.

180mm deep with 25mm high integral splashback.

Tap Holes The wash troughs can be supplied with tap holes to suit your




Separate stainless steel splashback 300mm high.

Phone: 01275 338064



W A S H W A R E








Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603






Product Code WTD

Material Manufactured from 1.6mm thick stainless steel with a satin finish.

Supplied with stainless steel front support legs as standard.

Length The wash trough is available to order online in eight

standard lengths: 1200 mm, 1500 mm, 1800 mm, 2100mm, 2400

mm, 2700mm, 3000mm and 3600mm.


including 3600mm.

Fixings The wash troughs are supplied as standard with legs and wall

bearers. The rear splashback is also pierced with screw holes

Waste Outlet


unslotted flush grated waste fitting positioned left or right.



Tap Holes The wash troughs can be supplied with tap holes to suit your


Optional Extras Taps, valves and spouts.




T I M E

Phone: 01275 338064



Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN

W A S H W A R E









Phone: 01275 390603







T I M E


Stainless Steel Wash Trough Splashback Type 405mm Projection

Product Code WTE


finish. Supplied with stainless steel front support legs as

standard.


standard lengths: 1200 mm, 1500 mm, 1800 mm, 2100mm,

2400 mm, 2700mm, and 3000mm.


including 3600mm.

Fixings The wash troughs are supplied as standard with legs and wall

bearers. The rear splashback is also pierced with screw holes

Waste Outlet


unslotted flush grated waste fitting positioned left or right.



Tap Holes Designed for the use of bib taps mounted onto the rear wall.

Optional Extras Taps, valves and spouts.

Phone: 01275 390603



W A S H W A R E









Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN





T I M E


Inset Wash Trough Stainless Steel

Product Code INWT

Material

Manufactured from 1.6mm thick stainless steel with a satin

finish.

Length

The wash trough is available to order online in the following

sizes: 1150 mm, 1450 mm, 1750 mm, 2050 mm and 2350 mm.

This includes the 20mm flange at both ends.

Designed to sit in standard length worktops leaving a 25mm

worktop edge at both ends.

The wash trough will sit into a worktop and has a 20mm flange

on all four sides which can be bonded onto the worktop.

Special sizes can be made on request.

Waste Outlet


unslotted flush grated waste fitting positioned at left or right

hand end.

Dimensions

385mm front to back including 20mm flanges.

180mm deep.

Special sizes on request.

Optional Extras


Phone: 01275 338064



W A S H W A R E








Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603







T I M E


Stainless Steel Compact Wash Trough

Product Code CWT

Compact wash troughs are manufactured with a short 325mm

projection for ease of access to the taps, areas with limited

access, and have a rounded front edge and folded edges for

safety. Manufactured from 1.6mm thick stainless steel with a satin

finish.

Length The compact wash trough is available to order online in five lengths:

1200mm, 1500mm, 1800mm, 2100mm and 2400 mm. Other sizes

are available on request.




are available.

Waste Outlet

The compact wash troughs are supplied with a centre 38 mm

(1 1/2”) BSP unslotted flush grated waste fitting.



Tap Holes

The compact wash troughs can be supplied with tap holes to suit

your requirements. Please specify when ordering.




Chrome plated bottle trap with waste pipe and wall flange.

Phone: 01275 338064



W A S H W A R E








Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603



Shown with optional soft touch time flow taps.





T I M E


Stainless Steel Wash Trough High Splashback Type 375mm Projection

Product Code WTHS


finish. High splashback for mounting wall spouts with

concealed pipework connections.


standard lengths: 1200 mm, 1500 mm, 1800 mm, 2100mm,

2400 mm, 2700mm, and 3000mm.


including 3300mm.

Fixing The wash troughs are manufactured with integral wall

fixing brackets. Optional front support legs available.

Waste Outlet



centrally.



Tap Holes The wash trough is designed for the use of bib taps or spouts

mounted on the rear upstand. Please specify tap holes when

ordering.



Phone: 01275 338064



W A S H W A R E









Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN

Phone: 01275 390603







T I M E


Stainless Steel Wash Trough With Infrared Sensor Taps

Product Code WTIR

Stainless steel wash troughs supplied with infrared sensor operated

taps with mains or battery power supply.

Material 1.6mm thick stainless steel with a satin polish finish.

Length 1200mm (with 2 sensor taps), 1500mm and 1800mm (with 3

sensor taps), and 2400 mm (with 4 sensor taps).

Fixing Integral stainless steel wall fixing brackets at each end. The integral

splashback is pierced for screw fixing along the top edge. Optional

stainless steel front support legs.

Waste Outlet

Centre 38 mm (1 1/2”) BSP unslotted flush grated waste fitting.


150mm deep with 75mm high integral splashback.

Sensor Taps WRAS approved mains or battery operated sensor taps.

See page 2 for full details.


TMV3 water mixing valves. (Recommended one per sensor tap).

Phone: 01275 338064



W A S H W A R E








Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603







T I M E


Infrared Angled Basin Tap Mains or Battery Supply

Phone: 01275 338064



W A S H W A R E









Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN

Product Codes: DST-M (mains) DST-B (battery)

Angled infrared basin tap with either battery or mains power

supply. Ideal for public washrooms, pubs, restaurant and

unattended toilet areas to prevent water wastage.

Material

Solid one piece brass body with chrome finish.

Operation

Turns on automatically when hands are under the spout and shuts

off when hands are removed.

Auto shut off after 90 seconds continual use.

Specification

Suitable for cold or premixed water supply.

Maximum operational temperature 70°C.

Battery operation with 9v alkaline battery and low battery

indicator.

Mains operation with 9v transformer.

Minimum pressure of 0.5 bar.

Maximum water pressure 8 bar.

23mm to 40mm tap hole size, max 40mm thick surface.

WRAS approved.

Two years manufacturers warranty against defects.

Flow Rates

Pressure (Bar) 0.5 1.0 2.0 5.0

Flow rate (l/min) 3.6 4.6 5.3 5.4

BREEAM compliant (<3 l/min at 0.5 bar, max 5.7 l/min)

Phone: 01275 390603







T I M E


Stainless Steel Wash Trough With Knee Operated Taps

Product Code WTA-KV

Stainless steel wash troughs supplied with time flow knee operated

valves and chrome plated basin spouts.

Material 1.6mm thick stainless steel with a satin polish finish.

Length 1200mm (with 2 knee valves), 1500mm and 1800mm (with 3 knee

valves), and 2400 mm (with 4 knee valves).

Fixing Integral stainless steel wall fixing brackets at each end. The integral

splashback is pierced for screw fixing along the top edge. Optional

stainless steel front support legs.

Waste Outlet

Centre 38 mm (1 1/2”) BSP unslotted flush grated waste fitting.



Knee Valves & Spouts Chrome plated knee operated time flow valves with 15

seconds flow at 3 bar. 15mm compression inlet and outlet

connections. For pre-mixed or cold water supply.

Chrome plated fixed basin spout.


TMV3 water mixing valves. (Recommended one per knee valve).

Phone: 01275 338064



W A S H W A R E








Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603







T I M E


Stainless Steel Nursery Wash Trough

Product Code NWT

Stainless steel nursery wash troughs are manufactured with a

short 325mm projection for ease of access to the taps, and

have a rounded front edge and folded edges for safety. Manufactured from 1.6mm thick stainless steel with a satin finish.

Length The wash trough is available to order online in five standard

lengths: 1200mm, 1500mm, 1800mm, 2100mm and 2400 mm.

Other sizes are available on request.




are available.

Waste Outlet

The wash troughs are supplied with a centre 38 mm (1 1/2”) BSP

unslotted flush grated waste fitting.



Tap Holes

The wash troughs can be supplied with tap holes to suit your





Chrome plated 38mm bottle trap with waste pipe and wall flange.

Phone: 01275 338064



W A S H W A R E








Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603



Shown with optional soft touch time flow taps


W A S H W A R E E S S E N T I A L S L T D Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN

Phone: 01275 390603

Web: www.washwareessentials.co.uk E-mail: [email protected]


Washware Eco Solid Surface Wash Trough

Product Code WESSW Washware Eco solid surface wash troughs are ideal for schools and

commercial applications where their strength, durability and design make

these wash troughs the perfect choice. The clean simple design offers a

practicle cost effective solution for communal hand washing which is

easily cleaned and maintained. The wash troughs are manufactured from

Hi-Macs solid surface material which is a blend of 75% natural minerals

and pigments in an acrylic polymer resin to give a natural smooth non-

porous finish.

Styles

Wall mounted design supplied with wall brackets.

Sit-on vanity mounted design for mounting on vanity unit by others

supplied without wall brackets.

Details

Taplanding design for deck mounted taps.

Centre 38mm waste fitting.

Standard lengths: 1200, 1800, 2400, and 3000mm long or made to

measure up to 3000mm long.

Smooth hygienic non-porous material which inhibits the growth of mold.

Available in Alpine white only.

Installation

Wall mounted units are supplied complete with wall brackets for the

trough to sit on. The trough has a waterproof plywood panel bonded to

the underside to allow fixing to the brackets. Due to the weight of these

products adequate wall fixings points will be required.

Sit-on vanity unit mounted units will require suitable support underneath

the trough along the whole length.

Taps

The Washware Eco solid surface wash troughs can be supplied with or

without taps.


Vanity sit-on model (vanity unit by others)



Phone: 01275 390603



Washware Eco Solid Surface Wash Trough

Wall Brackets

Wall brackets for the wall mounted model.

350mm long and designed for minimum

visibility.

HI-MACS® is made from a blend of 75% natural minerals and pigments set in an acrylic polymer matrix which

inhibits the growth of bacteria and mold.

HI-MACS® has an eco-friendly non-porous surface with high resistance to everyday stains, scratches and heat.

Durability is similar to that of natural stone. It is a renewable material and can be recycled at the end of its lifespan.

Due to its superior quality and affordability HI-MACS® offers a better alternative than similar products such as

other solid surfaces materials, plastic laminate, granite, synthetic stone and tile.

The solid surface wash troughs can also be manufactured in Corian material. The Corian solid surface material is

manufactured by DuPont and is also a blend of natural minerals, pigments and acrylic polymer.


Phone: 01275 390603



Solid Surface Wash Trough Taplanding Style

Product Code SSWTL Solid surface Hi-Macs wash troughs are ideally suited for schools and


these wash troughs the perfect choice. The Hi-Macs solid surface wash

troughs are manufactured from a blend of 75% natural minerals and

pigments in an acrylic polymer resin to give a smooth non-porous finish.

Styles

Wall mounted design with wall brackets and removable 150mm front

fascia.

Sit-on vanity mounted design without front fascia (for mounting on

vanity unit by others).

Details



Standard lengths: 1200, 1500, 1800, 2400 and 3000mm or made to

measure up to 3000mm.


Standard colour is Alpine White, but a choice of 8 colours is available for

the same price. Other colour options are available to order.

Wall mounted models can be ordered with a fascia panel in a contrasting

colour to the trough.

Installation







Taps

The solid surface taplanding style wash troughs can be supplied with or

without taps.

Colours

The solid surface wash troughs and front fascia panels can be supplied as

standard in the following colours: Alpine White, Banana, Sky Blue,

Marta Grey, Festival Pink, Fiery Red, Orange and Light Green.

Front fascia panels can be chosen in a contrasting colour to the wash

trough. (Sit-on vanity unit mounted wash troughs do not have a front

fascia panel).


Wall Mounted

Sit-on Vanity Mounted

Base unit by others



Phone: 01275 390603



Solid Surface Wash Trough Taplanding Style

Concealed Wall Brackets

Concealed wall brackets for the wall mounted model.










Phone: 01275 390603



Solid Surface Wash Trough Splashback Style

Product Code SSWSB Solid surface Hi-Macs wash troughs are ideally suited for schools and


these wash troughs the perfect choice. The Hi-Macs solid surface wash

troughs are manufactured from a blend of 75% natural minerals and

pigments in an acrylic polymer resin to give a smooth non-porous finish.

Styles


fascia.



Details

Splashback design with 200mm rear upstand.

Designed for wall mounted taps connected through the rear splashback.









Installation







A rear void or duct will be required for the tap pipework and onnections.

Taps

The solid surface splashback style wash troughs can be supplied with or

without taps.

Colours






fascia panel).


Wall Mounted


Base unit by others



Phone: 01275 390603



Solid Surface Wash Trough Splashback Style












Phone: 01275 390603



Solid Surface Nursery Wash Trough

Product Code SSWN The wall mounted nursery school solid surface wash troughs have been

designed specifically for younger children and have a shorter projection

of 325mm. This enables an easier reach to the taps. They are also suitable

for older users where space is limited. The strength and durability of the

solid surface material make these wash troughs an ideal solution for

nursery schools, preschools, and other public wash room applications.

Styles


fascia.



Details

325mm shorter projection.










Installation







Taps

The solid surface nursery style wash troughs can be supplied with or

without taps.

Colours






fascia panel).


Wall Mounted


Base unit by others



Phone: 01275 390603



Solid Surface Nursery Wash Trough












Phone: 01275 390603



Ocean Solid Surface Wash Trough

Product Code OSSW Ocean solid surface basin troughs are manufactured from Hi-Macs solid

surface material. The Ocean solid surface troughs incorporate individual

basin sections 500mm wide with a waste fitting for each user in a

continuous top. The stylish design will enhance and complement any

modern wash room area. The basin sections offer separate hand washing

facilities rather than a continuous multi use trough. The strength and

durability of the solid surface material makes this an ideal solution for

office blocks, school washrooms, as well as many other applications such

as nightclubs, pubs, hotels, restaurants, shopping centers, and hospitals.

Style

Wall mounted design with wall brackets.



Details


38mm waste fitting to each basin section.

Standard lengths: 1000, 1500, 2000, 2500 and 3000mm long.




Installation







Taps

The solid surface Ocean style wash troughs can be supplied with or

without taps.

Colours

The solid surface wash troughs can be supplied as standard in the

following colours: Alpine White, Banana, Sky Blue, Marta Grey, Festival

Pink, Fiery Red, Orange and Light Green.




Phone: 01275 390603



Ocean Soild Surface Wash Trough

Wall Brackets



visibility.










Phone: 01275 390603



Metropolitan Solid Surface Wash Trough

Product Code MSSW Metropolitan solid surface wash troughs are manufactured from Hi-Macs

solid surface material. The Metropolitan solid surface wash trough is

manufactured with a forward sloping base and a front covered central

waste fitting. The clean modern design will compliment any wash room

area, and has proven popular in many prestigious board rooms and office

blocks. The hidden waste keeps the wash trough appearance clean,

and reduces regular maintenance and cleaning times. The strength and

durability of the solid surface material makes this an ideal solution for

office blocks, school washrooms, as well as many other applications such

as nightclubs, pubs, hotels, restaurants, shopping centers, and hospitals.

Styles




Details


Slotted waste channel at front concealed 38mm waste fitting.

Standard lengths: 1200, 1800, 2400, 3000 and 3600mm long or made to





Installation







Taps

The solid surface Metropolitan style wash troughs can be supplied with

or without taps.

Colours







Phone: 01275 390603



Metropolitan Solid Surface Wash Trough

Wall Brackets



visibility.










Phone: 01275 390603



Urban Solid Surface Wash Trough

Product Code USSW Urban solid surface wash trough manufactured from Hi-Macs solid

surface material. The Urban solid surface wash trough is manufactured

with a flat sloping base and a rear covered waste channel. The sleek

contemporary minimalistic design will complement any modern wash

room area. The hidden waste system keeps the wash trough appearance

clean, and reduces regular maintenance and cleaning times. The strength

and durability of the solid surface material makes this an ideal solution

for office blocks, school washrooms, as well as many other applications

such as nightclubs, pubs, hotels, restaurants, shopping centers, and

hospitals.

Styles




Details


Rear waste channel with removable cover and 38mm centre waste

fitting.

Standard lengths: 1200, 1800, 2400, 3000 and 3600mm long or made to





Installation







Taps

The solid surface Urban style wash troughs can be supplied with or

without taps.

Colours





Shown without waste cover



Phone: 01275 390603



Urban Solid Surface Wash Trough

Wall Brackets



visibility.












T I M E


Wash Trough Taps

Phone: 01275 338064



W A S H W A R E


The basin tap is a crosshead design suitable for use in most applications where a

simple straight forward tap is required. The tap is supplied in pairs.

The basin tap is designed and manufactured to British Standard 5412 from solid

brass and finished in a high polish chrome. Supplied with a 12 mm (1/2 in) BSP

male inlet connection.

The soft touch time flow press button non-concussive basin tap provides savings

in both water usage and energy in all commercial and industrial environments.

The tap provides approximately 9 seconds duration of flow when the push button

top is depressed. The self closing non-concussive deck basin tap is manufactured

from brass and has a high polish chrome finish. Supplied with a 12 mm (1/2 in)

BSP male inlet connection.

The soft touch operation requires 1.18kg (11.57nm) force at 0.5bar inlet pressure

and 1.7kg (16.67 nm) force at 5 bar inlet pressure.

The lever basin tap is operated by a quarter turn lever and ceramic disc for rapid

on/off flow. The tap is supplied in pairs.

The lever basin tap is manufactured from solid brass and finished in a high polish

chrome. Supplied with a 12 mm (1/2 in) BSP male inlet connection.

The monobloc lever mixing tap features a sequential spray mixer providing cold

to hot through 180 degree operation of the lever. The tap incorporates a ceramic

disc cartridge. The mixer tap is not thermostatic and a proprietary temperature

control device (TMV) should always be used.

The monobloc mixing tap is manufactured from brass and has a high polish

chrome finish. The 180 degree lever operates a ceramic disc cartridge. Supplied

with flexible water inlet hoses.

The knee operated timed flow valve and spout are ideal for commercial and

industrial environments. Ideal for use where a high level of hygiene is

required. The valve is designed for exposed wall mounting and the timed

control gives approximately 15 seconds flow from each activation, by the

lever moving in any direction.

Manufactured from brass with a chrome plated finish, the valve is suitable for

connecting to a temperature controlled warm water supply and is supplied

with inlet and outlet compression fittings to suit 15 mm diameter pipe.







Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603







T I M E


Wash Trough Bib Taps

Phone: 01275 390603



W A S H W A R E


The wall mounted bib tap has a crosshead design suitable for use in

most applications where a simple straightforward tap is required. The

tap is supplied in pairs.

The wall mounted bib tap is designed and manufactured from solid

brass and finished in a high polish chrome. Supplied with a 12 mm

(1/2 in) BSP male inlet connection.

The 6 inch lever wall mounted bib tap is operated by a quarter turn lever

and ceramic disc for rapid on/off flow. The tap is supplied in pairs.

The lever bib tap is manufactured from solid brass and finished in a high

polish chrome. Supplied with a 12 mm (1/2 in) BSP male inlet

connection. (Also available with 3 inch lever if required).

The time flow wall mounted bib taps are operated by a press button. The

water will run for a set period (about 15 seconds) and will then shut off

automatically. Supplied in pairs.

The press button time flow taps are manufactured from solid brass and

finished in a high polish chrome. Supplied with a 12mm (1/2”) BSP

male inlet connection.

Chrome plated wall plate elbow with 15mm compression fitting.

The wall plate elbow is designed for mounting bib taps on the face wall

with a surface (exposed) water supply.







Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN






T I M E


Wash Trough Accessories

Phone: 01275 338064



W A S H W A R E


Stainless steel wall mounted liquid soap

dispenser with concealed wall mounting

bracket. Satin polish finish.

Pump action plastic soap valve with tamper

resistant sight gauge. 1.2 litre capacity with

hinged top refill door secured by a special

key.

Countertop liquid soap dispenser.

Stainless steel stem and dispenser spout,

chrome plated flange, and plastic soap

container. Dispenser spout rotates 360

degrees. 1 litre capacity with refilling from

the top via special locking key.

Stainless steel paper towel dispenser with

satin polish finish.

The unit hold 525 multifold or 400 c fold

paper towels and the dispensing slot has fully

hemmed and rolled edges for snag free

dispensing and user safety.

Fully hinged lid with lock and key for

refilling with refill viewing slots on both

sides.







Kestrel Court

Harbour Road

Portishead

Bristol

BS20 7AN


Phone: 01275 390603




W A S H W A R E E S S E N T I A L S L T D...O U T A C O M M E R C I A L W A S H R O O MPhone: 01275 338064 S U P P L I E D A T T H E R I G H T P R I C E O N T I M E Web: E-mail:...

Documents