VULNERABILITY SCANNING FOR ENHANCED SAFETY OF WOMEN & AWARNESS OF VALUABLE 1 Neha Singh, 2 Kirti Patil, 3 Charmi Soni, 4 Priyanka Nagargoje Student, Electronics & Communication department, Laxmi institute of Technology, Sarigam-Valsad. Gujarat Corresponding Author Detail: Neha Singh Student, ECE department, Laxmi institute of Technology, Sarigam-Valsad, Gujarat. Internal Guide Detail: Mrs. Siddhi Desai Assistant Professor, ECE department, Laxmi institute of Technology, Sarigam-Valsad. Gujarat. ABSTRACT This paper describes about vulnerability scanning for enhanced safety of women in which Many unfortunate incidents have been taking place in woman’s case. Problems may come from any direction such as women walking on the road after the work, going to super market or many other reasons for which they go alone. People at home are not sure of their return safely. Another factor is woman die without knowing the reason as they attend excursions and industrial trips conducted by the organizations. It happens due to attacks on woman but not suicides. Women are not as physically fit as men, in an emergency situation a helping hand would be assistance for them. For awareness of valuable main factor which can even be considered for women and in general for all that is fear for theft of valuable. KEYWORDS: IR Sensor, IR led, LM358, buzzer, active RFID tag (2 piece), active RFID receiver, 89s52 controller, LCD 16*2, Power supply. INTRODUCTION: This paper examines policy regarding the electronic Approaches and developments towards electronic device which detects two way mirrors and also RFID master slave device along with it which gives notification for forgotten the valuables. So different existing identity documents are mentioned and enforced during this project. According to the reports of WHO, NCRB Social government organization 35% Women over the world are facing problems in public places. Considering this as a major issue, we have taken up on along with awareness of losing valuable things, women security for trial room mishap. Since prediction of mishap is not possible hence to minimize the possibility of physical violence by keeping all the alert tools ready to safe escape from violent Situation. This will reduce risk and bring assistance when needed. We are proposing project in which we will develop device for checking safety in trial room by firstly testing mirror and secondly checking whether video is been recorded. Along with it we are also developing a master slave based RFID device which will alert if our valuable like mobile phone or wallet are forgotten or left behind. The Main objective of our project is to make safety trial rooms for women and to aware people for their valuables. vulnerability scanning for enhanced safety of women will help women to detect the mirror whether it is two way mirror or not. So safety issues related to women in trial rooms will be decrease .We are also trying to propose technique which detects . The clock frequency when video is been recorded so if video is being captured in trial room this device will be useful for detection of it and women will get alert. Awareness of valuable will help people if International Journal of Scientific Research in Engineering (IJSRE) Vol. 1 (3), March, 2017 IJSRE Vol. 1 (3), March, 2017 www.ijsre.in Page 5
8
Embed
VULNERABILITY SCANNING FOR ENHANCED SAFETY OF … · 2017-05-05 · VULNERABILITY SCANNING FOR ENHANCED SAFETY . OF WOMEN & AWARNESS OF VALUABLE. 1Neha Singh, 2Kirti Patil, 3Charmi
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
VULNERABILITY SCANNING FOR ENHANCED SAFETY
OF WOMEN & AWARNESS OF VALUABLE
1Neha Singh,
2Kirti Patil,
3Charmi Soni,
4Priyanka Nagargoje
Student, Electronics & Communication department, Laxmi institute of Technology,
Sarigam-Valsad. Gujarat
Corresponding Author Detail:
Neha Singh
Student, ECE department,
Laxmi institute of Technology,
Sarigam-Valsad, Gujarat.
Internal Guide Detail:
Mrs. Siddhi Desai
Assistant Professor, ECE department,
Laxmi institute of Technology,
Sarigam-Valsad. Gujarat.
ABSTRACT
This paper describes about vulnerability scanning for enhanced safety of women in which Many
unfortunate incidents have been taking place in woman’s case. Problems may come from any
direction such as women walking on the road after the work, going to super market or many other
reasons for which they go alone. People at home are not sure of their return safely. Another factor
is woman die without knowing the reason as they attend excursions and industrial trips conducted
by the organizations. It happens due to attacks on woman but not suicides. Women are not as
physically fit as men, in an emergency situation a helping hand would be assistance for them. For
awareness of valuable main factor which can even be considered for women and in general for all
that is fear for theft of valuable.
KEYWORDS: IR Sensor, IR led, LM358, buzzer, active RFID tag (2 piece), active RFID
receiver, 89s52 controller, LCD 16*2, Power supply.
INTRODUCTION:
This paper examines policy regarding the electronic Approaches and developments towards
electronic device which detects two way mirrors and also RFID master slave device along with it
which gives notification for forgotten the valuables. So different existing identity documents are
mentioned and enforced during this project.
According to the reports of WHO, NCRB Social government organization 35% Women over the
world are facing problems in public places. Considering this as a major issue, we have taken up
on along with awareness of losing valuable things, women security for trial room mishap. Since
prediction of mishap is not possible hence to minimize the possibility of physical violence by
keeping all the alert tools ready to safe escape from violent Situation. This will reduce risk and
bring assistance when needed. We are proposing project in which we will develop device for
checking safety in trial room by firstly testing mirror and secondly checking whether video is
been recorded. Along with it we are also developing a master slave based RFID device which will
alert if our valuable like mobile phone or wallet are forgotten or left behind.
The Main objective of our project is to make safety trial rooms for women and to aware people
for their valuables. vulnerability scanning for enhanced safety of women will help women to
detect the mirror whether it is two way mirror or not. So safety issues related to women in trial
rooms will be decrease .We are also trying to propose technique which detects . The clock
frequency when video is been recorded so if video is being captured in trial room this device will
be useful for detection of it and women will get alert. Awareness of valuable will help people if
International Journal of Scientific Research in Engineering (IJSRE) Vol. 1 (3), March, 2017
IJSRE Vol. 1 (3), March, 2017 www.ijsre.in Page 5
something is forgotten by them. So in several distance of meters they will get notification that
they forgot the valuable. Through our device women will not be victim of such unsafe trial rooms
and will help common people in such that if they forget things than anyone can do misuse of their
valuables.
Vulnerability scanning for enhanced safety of women’s purpose is detection of two way mirror
for women safety issues in trial rooms, shops, etc for these we are using Infrared sensor. An
infrared sensor circuit is one of the basic and popular sensor module in an electronic device. This
sensor is analogous to human’s visionary senses, which can be used to detect obstacles and it is
one of the common applications in real time so the basic concept of IR sensor is to transmit IR
signal in a direction and a signal is received at IR receiver. Then IR radiation bounces back from
the mirror. So the object is mirror therefore IR LED transmits signal on mirror and signal is
reflected back from the mirror. The reflected signal is received by IR receiver. This IR sensor is
module which decode the signal. After decoding signal if mirror is two way mirror the signal will
reflect back and LED will blink. So once transmitter and receiver is complete both should be
placed at certain angle so that mirror detection happens in proper way. This angle is nothing but
direction of angle which is +/- 45 degree. So we are implementing IR transmitter using
LM358low power dual operational amplifier integrated circuit transmits continuous IR rays to be
received by an IR receiver module. An IR output terminal of the receiver varies depending upon
its receiving of IR rays. Since this variation cannot be analyzed as such, therefore this output can
be fed to a comparator circuit. Here an operational amplifier of LM358 is used as comparator
circuit. Implementation of IR receiver will be done by using LED and LCD 16*2 as an indicator.
For Awareness of valuable things let’s take an example of students as we carry some valuable
things like Identity card, mobile, laptops, assignment books etc. so if we go out from the home
and forgot to carry identity card then this device will be used as master slave. Master device will
be with us and slave means tags stick to our valuable things. Under 10-20 meter range we will get
notification that we forgot identity card. Now for this device we are using RFID which can track
movement of objects through a network of radio enabled scanning device over a distance of
several meter. It consist of transponder and for programming and coding we are using 89S52
Microcontroller to upload new codes to it without use of external hardware programs The tag is
active in the sense it is powered by battery and gives long range of operation as compared to
passive tags. There is a jumper for ON/OFF of the tag. When the jumper is moved to ON position
the tag is connected to battery. When it is powered ON it transmits 16 bit unique code ID on 433
MHZ frequency every 6 seconds. The transmission time for the signal is 100ms after which it
goes to sleep thus saving battery. After 6 second it wakes up again automatically and transmits its
unique 16 bit code. This keeps going on as long as the tag is powered ON. The battery life is
around 2 months with continuous on position. Antenna in built on the PCB itself making the unit
compact and hand held. There can be up to 64 active tags operating in same premises. For output
we had taken LCD16*2 and buzzer as an indicator.
LITERATURE SURVEY
a) K Abdul Rahman - ,7002Reichardt, Adelson and Bergen, Chubb & Sperling, 1988; Cavanagh &
Mather, Ledgeway& Smith, Eagleman ;Wade &Verstraten, Sandia. Research and investigation on
definition of infrared sensors.In this system, They introduced us about Sensor or transducers
which define as a device that receives energy from one system and transmit it to another, like
physical variable into signal variable. Broadly defined, the sensor is a device which capable of
being actuated by energizing input from one or more transmission media and in turn generating a
related signals to one or more transmission systems. It provides a usable output in response to
specified input measured, which may be physical or mechanical quantity, property, or conditions.
The energy transmitted by these systems may be electrical, mechanical or acoustical. The nature
International Journal of Scientific Research in Engineering (IJSRE) Vol. 1 (3), March, 2017