VT56 TPMS TOOL UNIVERSAL SENSOR PROGRAMING

This step-by-step programming guide will show you how to get a IntelliSens UVS4041with a fixed rubber valve ready to install on a 2010 Chrysler

300. The same process can be used

to program IntelliSen Universal TPMS Sensors for over 150 million Vehicles In Operation (VIO) today!

VT56 TPMS TOOL UNIVERSAL SENSOR PROGRAMINGA STEP-BY-STEP GUIDE TO PROGRAMING AN INTELLISENS UNIVERSAL TPMS SENSOR

UVS4041

FOR DIRECT ASSITANCE, CALL US!

888 621 8767BH-SENS.COM | INTELLISENS.COM

Select the TPMS sensor manufacturer ‘BH SENS (Huf)’

STEP 3

Locate the vehicle manufacturer, in this case ‘Chrysler’

STEP 5

Select programming option. ‘Create’ a new ID, or ‘Copy’ the old sensor ID

STEP 9

Select the specific vehicle model year you are working on

STEP 7

Wait for the VT56 TPMS Tool to transfer the protocol to the UVSUniversal TPMS Sensor

STEP 11

Choose ‘Sensor’, ‘Make’ shows sensors by Y/M/M

STEP 2

Select ‘Program’, as show in the image of the VT56 TPMS tool to the left

STEP 1

Choose ‘IntelliSens UVS’ for Universal TPMS Sensors

STEP 4

Next, identify thevehicle model, for our example, a ‘300’

STEP 6

Hold the sensor in the programming position, see the image on the bottom right of the page

STEP 10

Identify the UVSsensor, in this case a UVS4041

STEP 8

Once you see the confirmation page the sensor is ready to mount on the rim!

STEP 12