WWW.PRECIAMOLEN.COM WWW.PRECIAMOLEN.COM The VS 600 CS is a high-resistance kit weighbridge to mount on site, with a concrete platform that has been designed to meet severe application requirements. The highly robust VS 600 CS is available with two capacities: 60 t and 80 t and two lengths 16 m and 18* m. Platform The metal framework is made up of 6 side stringers, 2 end spacers and 2 central spacers to screw. It comes with bars designed for reinforcement. The whole set, directly mounted onto a Polyane film put onto the civil works, makes the casing perfectly adapted to concrete pouring. The quantity of concrete to pour depends on the size of the bridge. For a 17.80 m weighbridge, approximately 13 m 3 of concrete dosed at 320 kg/m 3 are required. Dimensions Capacity: 60 t or 80t, Scale division: 20 kg at 50 kg, Height: 360 mm (of which 100 mm on ground). European conformity The whole set complies with the WELMEC 2.4 guide. CDL digital load cell Load cell characteristics Nominal unit capacity (Emax) of 30t, Limit load 150% Emax, Breakage load 300% Emax, IP 68 waterproof (despite extended immersion), Digital PM Net network technology with weight indicator, Approved for trade use with CE according to R60 OIML test trial. Load cell environment * Real length: 17.80 m. The weighbridge is equipped with 8 stain- less steel compression digital load cells placed on sides under the spacers and accessible without any disas- sembly. 1. Upper plate 2. CDL 30 t or 50 t load cells 3. Cups 4. Compensation shims 5. Anti-rotation sheet 6. Lower plate 7. Embedded anchors 6 7 1 3 5 3 2 4 10-13-01-1 FT - 02/2014 VS 600 CS On-site poured concrete weighbridge