VRi

Vir

tua

l R

ea

lity

In

terf

ac

e

Part No. V4083-0001

www.vintenradamec.comEN

Installation Guide

VRi Box

Copyright © 2012All rights reserved.

Original Instructions: English

All rights reserved throughout the world. No part of this document may be stored in a retrieval system, transmitted, copied or reproduced in any way, including, but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of the Vitec Group plc.

DisclaimerThe information contained in this manual is believed to be correct at the time of printing. Vitec Videocom Ltd reserves the right to make changes to the information or specifications without obligation to notify any person of such revision or changes. Changes will be incorporated in new versions of the publication.

We are making every effort to ensure that our manuals are updated on a regular basis to reflect changes to product specifications and features. Should this manual not contain information on the core functionality of your product, please let us know. You may be able to access the latest revision of this manual from our website.

Vitec Videocom Ltd reserves the right to make changes to product design and functionality without notification.

TrademarksAll product trademarks and registered trademarks are the property of The Vitec Group Plc.

All other trademarks and registered trademarks are the property of their respective companies.

Published by:Vitec Videocom LtdSupports Technical Publications Department Western Way, Bury St EdmundsSuffolk IP33 3TBUnited KingdomEmail: [email protected]

Contents

Safety & Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Components and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Compatibility and Mounting Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Mounting to a Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mounting to a Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mounting to Lens Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Power Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Power Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Genlock I/O Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Powering Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Maintenance and General Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Technical Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

FCC Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Environmental considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Pollution statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1

Safety & Warnings

Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these instructions. Do not operate the product if you do not understand how to use it safely. Save these instructions for future reference

Warning Symbols Used in these InstructionsSafety warnings and cautions are included in these instructions. These safety instructions must be followed to avoid possible personal injury and avoid possible damage to the product.

Intended UseThe VRi box is designed to interface with instrumented support equipment and lenses to provide camera tracking data for use with VR/AR systems. The VRi box is intended for use by television camera operators within a TV studio environment or on outside broadcasts (OB) when protected from weather by a suitable waterproof cover.

Electrical Connection

WARNING!Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘Caution’.

ELECTRIC SHOCKWhere there is a risk of electric shock, comments appear supported by the hazardous voltage warning triangle.

WARNING! Risk of electric shock. Always disconnect and isolate the product from the power supply before attempting any servicing or removing the covers.

WARNING! Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.

WARNING! The external DC PSU used must be approved to IEC 60950-1, 2nd edition, and have a power output limited to the requirements of the equipment.

CAUTION! This product must be connected to a power supply of the same voltage (V) and current (A) as indicated on the product. Refer to the Technical Specifications for the product.

CAUTION! All connections to other devices must be made using shielded cables.

CAUTION! We recommend that you use the power supply cable supplied with the product.

CAUTION! Using alternative power sources will invalidate the system EMC liability.

CAUTION! Do not exceed the current output limit of the product when powering auxiliary devices.

CAUTION! Always use a fuse of the correct type and rating for the product. Refer to the Technical Specifications for the product.

2

Safety & Warnings

Basic Electrical Insulation (Class 1 equipment)

Mounting and Installation

Water, moisture and dust

Ventilation

Operating Environment

Cleaning

Maintenance

WARNING! This product is Class 1 equipment. For safe operation this equipment must be connected to a power supply that has a protective earth connection (US: ground).

WARNING! Do not install this product onto a bracket, support or other equipment that is not designed to support the weight of the product and its payload. All ceiling or wall supports must comply with local government regulations.

WARNING! Installation of this product must only be performed by qualified and trained electrical engineers.

WARNING! Always ensure that all power and auxiliary communications cables are routed so that they do not present any danger to personnel.

WARNING! Protect the product from water, moisture and dust. The presence of electricity near water can be dangerous. When using this product outside, protect from rain using a suitable waterproof cover.

CAUTION! Slots and openings are intended for ventilation purposes to ensure reliable operation of the product and protect it from overheating. Do not block or cover any slots and openings.

CAUTION! The product should not be used outside the operating temperature limits. Refer to the product Technical Specifications for the operating limits for the product.

WARNING! Risk of electric shock. Always disconnect and isolate the product from the power supply before cleaning.

CAUTION! Do not use solvent or oil-based cleaners, abrasives or wire brushes. Only use detergent-based cleaners.

WARNING! The fitting of non-approved parts and accessories, or the carrying out of non-approved alterations or servicing can be dangerous and could affect the safety of the product. It may also invalidate the terms and conditions of the product warranty.

3

About this Manual

The Virtual Reality interface (VRi) box has been designed to integrate with the Vinten Vector ‘i’ series heads and the Quattro SE pedestal. This manual covers the installation of the VRi box and its connections with compatible products and studio equipment.

When installation is complete, the VR system must be configured before the VRi box is used for VR tracking.

The VRi box can be configured using the VR software application running on a Windows-based PC or on a Vinten Radamec PDA. The configuration software is provided on a USB stick for installation on a PC or is pre-installed on a Vinten Radamec PDA.

For more information on configuring the VRi box, refer to the configuration guides installed on the USB memory stick supplied with this product, or contact Vinten Radamec.

4

Components and Connections

Front View

1 . . . . . . . . . . . . . . . . . . . . . . . DC In power supply socket2 . . . . . . . . . . . . . . . . . . . . . .DC Out power supply socket3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ventilation slots4 . . . . . . . . . . . . . . . . . Screw holes (for shoulder mounts)5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Genlock Out6 . . . . . . . . . . . . . Ethernet connectors (Network/Comms)7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .USB connectors8 . . . . . . . . . . . . . . . . . .APS/FP port (not currently in use)9 . . . . . . . . . . . . . . . . . . . . . . . . . . Inclinometer connector 10 . . . . . . . . . . . .Head encoder port (for ‘E’ series heads)11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lens encoder port

2

1

3

456

7

8

11

9

10

5

Components and Connections

Rear View

12 . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting/cable clamp13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable clamp14 . . . . . . . . . . . . . . DeviceLink.i port (for ‘i’ series heads)15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Genlock Out16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Genlock In17 . . . . . . . . . . . . . . . . . . . . . . . . . Genlock indicator LED18 . . . . . . . . . . . . . . . . . . . . . . . . . VR port (tracking data)19 . . . . . . . . . User Interface (UI) connector (for PC/PDA)20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fuse holder21 . . . . . . . . . . . . . . . . . . . . . . .Power socket – AC mains22 . . . . . . . . . . . . . . . . . . . .RESET button/indicator LEDs23 . . . . . . . . . . . . . . . . . . . . . . . . . . . Power On/Off switch24 . . . . . . . . . . . . . . . . . . .Jib/FH port (not currently used)

16

15

14

1719

13

12

23

20

21

22

18

24

6

Installation

Box Contents1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VRi Box2 . . . . . . . . . . . . . . . . . . . . . . . . Devicelink.i interconnect cable, 0.75m3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RS232 null modem cable4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .USB memory stickNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Installation Guide

NI = Not Illustrated

Compatibility and Mounting Kits

1

24

3

PRODUCT VRi BOX MOUNTING KIT PART NO.

Vector 430i V4089-1004

Vector750i V4080-1010V4080-1011

Vector 950i V4056-1002

Tripod Use mounting clamp

Lens Rods Use mounting clamp

Slip Rings V4094-0001

7

Installation

Mounting to a HeadThe VRi box can be mounted directly to a Vinten Vector ‘i’ series head using the appropriate mounting kit. For information about mounting the VRi box to a head, refer to the Mounting Kits Installation Guide (publication part no. V4006-4981).

Mounting to a Tripod

To mount the VRi box on to a tripod, proceed as follows:

Mount to the second stage of the tripod if a two-stage tripod is used.

CAUTION! To prevent overheating, the VRi box must be mounted with the ventilation slots facing downwards.

2

1 4

3

5

8

Installation

Mounting to Lens RodsWhen mounting the VRi box on to lens rods attached to a Vector head, the additional payload will affect the balance. This will need to be re-adjusted as necessary. To mount the VRi box onto lens rods, proceed as follows:

6

1

2

9

Installation

3

4

5

6

CAUTION! Check and re-adjust the balance of thehead after fitting the VRi box.

10

Installation

Power Options Power Output

POWERSOURCE

POWER LEDS POWER OUPUT

AC Mains

AC Mains12V Available

12V

24V Available5V

DC Supply

AC Mains 12V Available, butrestricted by theinput DC supply

12V

24V Not available5V

Battery Pack

AC Mains 12V Available, butrestricted by the

input battery pack12V

24V Not available5V

CAUTION! 24 volts potentially present on the VDC OUT XLR socket. Check the compatibility of the auxiliary device with the pin out configuration of the XLR socket. Refer to the Technical Specification section of this manual.

CAUTION! Do not exceed the current output limit of the product when powering auxiliary devices.

11

Installation

Genlock I/O Connections

GenlockSource

GenlockSource

Note: Genlock output from thecamera must be configuredas genlock black.

12

Installation

System Connections

Lens Encoder ConnectionUse the appropriate compatible cable to connect Canon or Fujinon lenses with quadrature encoder output. The lens port can also be used to connect externally mounted (bolt-on) lens encoder devices.

Ethernet ConnectionThe ethernet (NET2) port is used to communicate with a Quattro SE pedestal. The ethernet port can also be used for diagnostic and servicing purposes.

Note: If the Quattro SE is fitted with a slip ring, refer to the Slip Ring Setup Guide (publication p/n V4094-4980) for more details on connections.

CAUTION! All cables must be secured and dressed using the cable clamp to minimise the risk of damage.

13

Installation

Head ConnectionUse the supplied Devicelink.i cable (V3980-5052-9075) to connect to the ‘i’ series head to the VRi box. The length of this cable accommodates head mounting of the VRi box

Note: A longer version of the Devicelink.i cable will be required for other mounting configurations, such as when mounted to a tripod.

User Interface ConnectionUse the PDA power/data cable (V3980-5051-9075) supplied with the PDA to connect the VRi box to the Vinten Radamec PDA.

Alternatively, use the supplied RS232 null modem cable (D200-157) to connect the VRi box to a host PC or laptop.

14

Installation

Studio VR ConnectionConnect the VR port to the studio VR graphics system. This port provides formatted tracking data from the head, lens and pedestal.

VR Data Port Pin DesignationsThe VR Data port transmits the VR data to the studio VR graphics system. The RS422 pin designations are as follows:

Powering UpBefore powering up the VRi box, ensure that all external cable connections are secured correctly.

To power up, operate the on/off rocker switch. If powering the VRi box from the AC power supply all three power LEDs will illuminate. If powering from the DC power supply, only the 5V and 12V LEDs will illuminate.

If the power LEDs do not illuminate, refer to the Troubleshooting section of this manual.

Studio VRgraphicssystem

1 2 3 4 5

6 7 8 9

VR ConnectorPin Number

Function on VRConnector

Function on VR StudioSystem

2 RXD-/RXA TXD-/TXA

6 RXD+/RXB TXD+/TXB

3 TXD-/TXA RXD-/RXA

7 TXD+/TXB RXD+/RXB

Note: Pin number allocations at the VR studio system end areproduct-specific.

15

Troubleshooting

Fault Check Comments

VRi box is switched on, but mains, 5V and 12V power indicator LEDs are not illuminated.

Check that either a 50–60 Hz AC mains power supply of 100–240V or a DC power supply of 9.5–28V is connected.

If DC output from the VRi box is in use, try disconnecting it in case the load is too high

If a mains supply is connected to the VRi box, check and/or replace the fuse.

Genlock indicator LED is red. Check that the genlock signal from the studio supply is con-nected to the Genlock In BNC connector.

If using a camera as a genlock source, the output must be configured to genlock black.

If the problem persists, contact Vinten or Vinten Radamec customer support.

16

Maintenance and General Notices

Routine MaintenanceThe VRi box requires minimal routine maintenance, apart from checking the connections and overall operation periodically.

Routine checksDuring use, check the following:

• Check cables for signs or wear or damage. Replace as necessary.

• Periodically, check the fixings securing the VRi box to the head or tripod.

• Check that all cables are connected properly.

Cleaning

During normal use the only cleaning required should be a regular wipe over with a dry, lint-free cloth. Dirt accumulated during storage or periods of disuse may be removed with a vacuum cleaner. Particular attention should be paid to all connection ports.

Technical Specification

DimensionsWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.2 kg (9.3 lb)Height (incl. adaptor clamp) . . . . . . . . . . . . . . . . . . . . 148 mm (5.8 in.)Width (incl. cable clamp) . . . . . . . . . . . . . . . . . . . . . . 204 mm (8.0 in.)Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 mm (10.2 in.)

PowerAC power input . . . . . . . . Autoranging 80–250V, 50–60Hz, 2.6A max.DC power input . . . . . . . . . . . .Autoranging 9.5–28V DC @ 4.4A max.Power output . . . . . . . . . . . . . . . . . . . 12V DC @ 1A / 24V DC @ 1.5AFuse type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .T3.15A

EnvironmentalTemperature range (operation) . . . . . . 0°C to +40°C (32°F to +104°F)

Data SpecificationSupported data protocol. . . .RS422 (Vinten Radamec D1 data packet)RS232 compatible.

Genlock SpecificationComposite Video (CVBS) and S-Video (Y/C):

SDTV . . . . . . . . . . . . . . . . SMPTE 170M (NTSC), ITU-R BT.140 (PAL)

Component Video (YPBPR/GBR):

SDTV . . . . . .SMPTE 125M, SMPTE 267M, ITU-R BT.601 (480I, 576I)EDTV . . . . . . . . . . . . . . . . . . . . . . . . . . . . ITU-R BT.1358 (480P, 576P)HDTV . . . . . . . . . . . . . SMPTE 296M (720P), SMPTE 274M (1080I/P) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SMPTE RP211 (1080PsF)

WARNING! Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.

WARNING! Risk of electric shock. Always disconnect and isolate the product from the power supply before cleaning.

17

General Notices

VDC OUT XLR Socket

Technical specifications are subject to change without notice.

1

2

4

3

PIN Description

1 -12V

2 -24V

3 +24V

4 +12V

18

General Notices

FCC Certification

FCC NoticeThis product complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for assistance.

FCC WarningChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Declaration of ConformityThis product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This product may not cause harmful interference.

2.This product must accept any interference received, including interference that may cause undesired operations.

Declaration of Conformity

Vitec Videocom Limited declares that this product has been manufactured in accordance with BS EN ISO 9001:2008 and is in compliance with the essential requirements and other relevant provisions of the Machinery Directive 2006/42/EC. A copy of the Declaration of Conformity is available upon request.

Environmental considerations

ROHS Compliance StatementCamera Dynamics Limited is compliant with the European Union Directive 2002/95/EC Restrictions of Hazardous Substances (RoHS) that restricts the use of hazardous substances in Electrical and Electronic Equipment.

VRiV4083-0001

19

General Notices

European Union Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC)

This symbol marked on the product or its packaging indicates that this product must not be disposed of with general household waste. In some countries or European Community regions separate collection systems have been set up to handle the recycling of electrical and electronic waste products. By ensuring this product is disposed of correctly, you will help prevent potentially negative consequences for the environment and human health. The recycling of materials helps conserve natural resources.

Visit our website at for information on how to safely dispose of this product and its packaging.

In countries outside the EU:Dispose of this product at a collection point for the recycling of electrical and electronic equipment according to your local government regulations.

Pollution statementThis equipment is designed for operation in Pollution Degree 2 environments.

20

/2

VA V

inten Radamecitec Group brand

Publication part No. V4083-4980