The Voltage Controller for Servo Stabilizer (VCSS) senses the output voltage of the Voltage Stabilizer (230 V AC) and controls it within the set limits. The control limits are set by setting the Level & Gap settings. When the output voltage goes outside the set limits, the output Raise / Lower signal is given after the set delay is over. LED indication is provided to indicate the control action and a pair of NO contacts for Raise/Lower closes depending on whether the voltage has to be Raised or Lowered.Provision for setting Undervoltage (UV) and Overvoltage (OV) limits is also available. A pair of C/O contacts for both UV & OV is provided for external use (alarm or trip). A hysteresis of approximately 1V is provided for Raise & Lower & 5V for UV & OV. EE-401 Display for Control Vg. and Parameter setting Level & Gap settings for setting limits Variable Time Delay settings Features Auxiliary Supply : 95 to 350 V AC/DC Level Setting : Adjustable from 207V to 253V Gap Setting : Adjustable from 2V to 20V Undervoltage Setting : Adjustable from 180V to 230V Overvoltage Setting : Adjustable from 220V to 260V Time Delay Setting : Adjustable from 1 sec to 10 sec Output Contacts : 1 pair of (NO) contacts each for Raise & Lower with 5A @ 240VAC or 24VDC contact rating. 1 pair of C/O contacts for UV & OV with same rating o o Operating Temp. : 0 C to 50 C Overall Size : 96mm X 96mm X 110mm (H X W X D) Projection mounting : 96mm Centre to Centre, 4Ø x 2 holes Panel mounting : 90 x 90 mm cutout Weight : 1Kg. (approx.) Technical Specifications Voltage Controller for Servo Stabilizer : EE-401 Independent Undervoltage & Overvoltage settings for cut off LED Indication for Raise, Lower, UV, OV & Time Delay Operations Projection / Wall mountng EMCO ELECTRONICS Unit No. 13, Kedarnath, Tungareshwar Industrial Complex No. 1, Sativali, Vasai (E), Thane - 401 208. Factory : Tel.: +91-250-648 1782 / 1804 / 0114. E-mail : [email protected] www.emcoelectronics.org 302, Vasan Udyog Bhavan, Senapati Bapat Marg, Opp. Phoenix Mill / Big Bazar, Lower Parel (W), Mumbai - 400 013. H.O. : Tel.: +91-22-2490 2283 / 2492 3183 E-mail : [email protected] 15, Wood Street, (1st Floor) Richmond Road, Bangalore - 560 025. South : Tel.: +91-80-2557 0251 E-mail : [email protected] An ISO 9001:2008 Mfg. Co. Note : Images shown are for representational purpose only. Actual Product may differ. Product specifications are subject to change without prior notice.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The Voltage Controller for Servo Stabilizer (VCSS) senses the output voltage of the Voltage Stabilizer (230 V AC) and controls it within the set limits. The control limits are set by setting the Level & Gap settings. When the output voltage goes outside the set limits, the output Raise / Lower signal is given after the set delay is over. LED indication is provided to indicate the control action and a pair of NO contacts for Raise/Lower closes depending on whether the voltage has to be Raised or Lowered.Provision for setting Undervoltage (UV) and Overvoltage (OV) limits is also available. A pair of C/O contacts for both UV & OV is provided for external use (alarm or trip). A hysteresis of approximately 1V is provided for Raise & Lower & 5V for UV & OV.
EE-401
Display for Control Vg. and Parameter settingLevel & Gap settings for setting limitsVariable Time Delay settings
Features
Auxiliary Supply : 95 to 350 V AC/DCLevel Setting : Adjustable from 207V to 253VGap Setting : Adjustable from 2V to 20VUndervoltage Setting : Adjustable from 180V to 230VOvervoltage Setting : Adjustable from 220V to 260VTime Delay Setting : Adjustable from 1 sec to 10 secOutput Contacts : 1 pair of (NO) contacts each for Raise & Lower with 5A @ 240VAC or 24VDC contact rating.
1 pair of C/O contacts for UV & OV with same ratingo oOperating Temp. : 0 C to 50 C
Overall Size : 96mm X 96mm X 110mm (H X W X D)Projection mounting : 96mm Centre to Centre, 4Ø x 2 holesPanel mounting : 90 x 90 mm cutoutWeight : 1Kg. (approx.)
Technical Specifications
Voltage Controller for Servo Stabilizer : EE-401
Independent Undervoltage & Overvoltage settings for cut offLED Indication for Raise, Lower, UV, OV & Time Delay OperationsProjection / Wall mountng
EMCO ELECTRONICSUnit No. 13, Kedarnath, Tungareshwar Industrial Complex No. 1, Sativali,Vasai (E), Thane - 401 208.
Factory : Tel.: +91-250-648 1782 / 1804 / 0114.
E-mail : [email protected]
www.emcoelectronics.org
302, Vasan Udyog Bhavan, Senapati Bapat Marg, Opp. Phoenix Mill / Big Bazar, Lower Parel (W), Mumbai - 400 013.
H.O. :
Tel.: +91-22-2490 2283 / 2492 3183 E-mail : [email protected]
15, Wood Street, (1st Floor) Richmond Road, Bangalore - 560 025.South : Tel.: +91-80-2557 0251 E-mail : [email protected]
An ISO 9001:2008Mfg. Co.
Note : Images shown are for representational purpose only. Actual Product may differ. Product specifications are subject to change without prior notice.
Related Documents
