Voice Cable Modem User Manual Model CM1150V July 2018 202-11879-01 350 E. Plumeria Drive San Jose, CA 95134 USA
Voice Cable ModemUser Manual
Model CM1150V
July 2018202-11879-01
350 E. Plumeria DriveSan Jose, CA 95134USA
SupportThank you for purchasing this NETGEAR product.
You can visit www.netgear.com/support to register your product, get help, access the latest downloads and usermanuals, and join our community. We recommend that you use only official NETGEAR support resources.Contact your Internet service provider for technical support.
Trademarks©NETGEAR, Inc. NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEARtrademarks are used for reference purposes only.
ComplianceFor regulatory compliance information, visit http://www.netgear.com/about/regulatory. See the regulatorycompliance document before connecting the power supply.
2
Voice Cable Modem
Contents
Chapter 1 Hardware Setup
Unpack Your Cable Modem....................................................................................5Front Panel and LEDs............................................................................................6Rear Panel.............................................................................................................8Label......................................................................................................................9System Requirements............................................................................................9Install and Activate Your Cable Modem................................................................10
Set Up the Hardware.......................................................................................10Activate Your Internet Service With Xfinity.......................................................12Connect Your Cable Modem to a Router After Installation and Activation.......12Perform a Speed Test......................................................................................13
Chapter 2 Monitor Voice Telephone Lines
View Voice Status.................................................................................................15View the MTA Call List.........................................................................................15View the EMTA Event Log....................................................................................16
Chapter 3 Manage Your Network
Log In to the Cable Modem..................................................................................18View Cable Modem Initialization..........................................................................18View Cable Modem Status...................................................................................19View and Clear Event Logs..................................................................................19Specify the Cable Connection Starting Frequency..............................................20Change the admin Password...............................................................................20Reboot the Cable Modem....................................................................................21Reset the Cable Modem to Factory Default Settings...........................................21Use the Reset Button on the Back Panel.............................................................22Use the Factory Reset Software Button...............................................................22
Chapter 4 Troubleshooting
Use the LEDs to Troubleshoot.............................................................................24Cannot Log In to the Cable Modem.....................................................................25Troubleshoot the Cable Internet Connection........................................................26Troubleshoot Voice Connectivity..........................................................................26
Chapter 5 Supplemental Information
Factory Settings...................................................................................................28Technical Specifications.......................................................................................28
3
1Hardware Setup
This chapter covers the following topics:
• Unpack Your Cable Modem• Front Panel and LEDs• Rear Panel• Label• System Requirements• Install and Activate Your Cable Modem
For more information about the topics covered in this manual, visit the support website at support.netgear.com.
An uninterruptible power supply (UPS) can be purchased separately for continued serviceduring power outages. For a list of supported UPS models, visitnetgear.com/support/product/CM1150V.
Note
4
Unpack Your Cable Modem
Your package contains the following items.
Figure 1. Package contents
1. High Speed Cable Modem (Model CM1150V)
2. Phone cable
3. Ethernet cable
4. Power adapter
Hardware Setup
5
Voice Cable Modem
Front Panel and LEDs
The cable modem provides status LEDs on the front.
Figure 2. Front panel
You can use the LEDs to verify status and connections. The following table lists and describes each LEDon the cable modem.
Table 1. LED descriptions
DescriptionIconLED
• Solid green. Power is supplied to the cable modem.
• Off. No power is supplied to the cable modem.
• Solid red.The cable modem is too warm and might overheat.For more information about this condition, see Use the LEDsto Troubleshoot on page 24.
Power
Hardware Setup
6
Voice Cable Modem
Table 1. LED descriptions (Continued)
• Solid amber. One downstream channel is locked.
• Solid green. Two or more downstream channels are locked.
• Blinking green. The cable modem is scanning for adownstream channel or the cable modem is in partial servicemode.
• Off. No downstream channel is locked.
Downstream
• Solid amber. One upstream channel is locked.
• Solid green. Two or more upstream channels are locked.
• Blinking amber. The cable modem is scanning for anupstream channel.
• Blinking green. The cable modem is in partial service modeor the cable modem is in partial service mode.
• Off. No upstream channel is locked.
Upstream
• Solid green. The cable modem is online.
• Blinking green. The cable modem is synchronizing with thecable provider’s cable modem termination system (CMTS).
• Off. The cable modem is offline.
Online
Hardware Setup
7
Voice Cable Modem
Table 1. LED descriptions (Continued)
• Green. A powered-on device is connected to the Ethernetport at 1000 Mbps.
• Amber. A powered-on device is connected to the Ethernetport at 10 Mbps or 100 Mbps.
• Off. No device is connected to the Ethernet port.
• Blinking green or amber. The Ethernet port is processingtraffic.
Ethernet
• Solid green. The Tel 1 or 2 port is online.
• Blinking green. The Tel 1 or 2 port is processing a call orthe phone is off-hook.
• Off. The Tel 1 or 2 port is not in use.
Tel 1 and 2
Rear Panel
The connections and button on the rear panel are shown in the following figure.
Figure 3. Rear panel
Hardware Setup
8
Voice Cable Modem
Viewed from top to bottom, the back panel contains the following components:
• Reset button. Pressing the Reset button resets your cable modem. If the Reset button is pressed forat least seven seconds, the Power LED blinks green and your cable modem returns to its factory settings.
• Ethernet ports 1-4. For installation and activation, connect a computer to Ethernet port 1. After youinstall your cable modem and activate your Internet service, you can disconnect your computer andconnect a router to Ethernet port 1.
Your cable modem comes with plugs that cover Ethernet ports 2, 3 and 4. For moreinformation about Ethernet ports 2, 3, and 4, visitnetgear.com/support/product/CM1150V.
Note
• Tel 1 and 2 ports. Connect your phone line to the Tel 1 port.
The Tel 2 port works only for a two-phone-line subscription.Note
• Coaxial cable port. Connect the cable port to a cable wall outlet.
• Power On/Off button. Press the Power On/Off button to provide power to your cable modem.
• DC power connector. Connect the power adapter that came in the product package to the DC powerconnector.
Label
The cable modem label shows the login information, MAC address, and serial number.
Figure 4. Cable modem label
System Requirements
You need the following to install your cable modem:
• Compatible operating system:
- Windows 10
- Windows 8
- Windows 7
Hardware Setup
9
Voice Cable Modem
- Windows Vista
- Windows XP
- Windows 2000
- Mac OS
- Other operating systems running a TCP/IP network
• Compatible web browser:
- Microsoft Internet Explorer 5.0 or later
- Firefox 2.0 or later
- Safari 1.4 or later
- Google Chrome 11.0 or later
• Xfinity cable broadband Internet service
An uninterruptible power supply (UPS) can be purchased separately for continued serviceduring power outages. For a list of supported UPS models, visitnetgear.com/support/product/CM1150V.
Note
Install and Activate Your Cable Modem
The cable modem provides a connection between your cable Internet provider’s network and your computer,router, or WiFi router.
Set Up the Hardware
Figure 5. Connect your cable modem to a computer
Hardware Setup
10
Voice Cable Modem
To set up your cable modem:
1. Collect your Xfinity account information.
Collect your Xfinity account information, such as your account mobile phone number, user name,password, and account number.
2. Turn off and disconnect existing modems and routers.
If you are replacing a modem that is currently connected in your home, unplug the modem and plug thenew cable modem into the same outlet.
3. Connect a coaxial cable.
Use a coaxial cable to connect the cable port on your cable modem to a cable wall outlet.
Make sure that the cable is tightly connected.
4. (Optional) Connect a phone.
Connect your phone to the Tel 1 port on the rear panel of the cable modem using the phone cable.
The Tel 2 port works only for a two-phone-line subscription.Note
5. Connect the power adapter.
Connect the power adapter to your cable modem and plug the power adapter into an electrical outlet.
When the startup is complete, the Power LED lights green. If the Power LED does not light, press thePower On/Off button.
If the Power LED does not light, make sure that the Power On/Off button is in the On position.
6. Wait for the Online LED to light solid green.
This process might take up to 10 minutes.
When the Online LED lights, your cable modem is not connected to the Internet yet.You must activate your cable modem with your cable Internet provider.
Note
7. Connect a computer to your cable modem.
Use the Ethernet cable that is provided in the package to connect a computer to Ethernet port 1 on yourcable modem .
8. Activate your Internet service.
For information about how to activate your Internet service, see Activate Your Internet Service WithXfinity on page 12.
After you install and activate the cable modem, you can disconnect the computer andconnect a router to the cable modem. For more information, see Connect Your CableModem to a Router After Installation and Activation on page 12.
Note
9. Dial a number to place a test call.
Hardware Setup
11
Voice Cable Modem
To make calls, you need a voice service subscription with Xfinity.Note
Activate Your Internet Service With XfinityBefore you start the self-activation process, collect the following information:
• Personal information associated with your Xfinity account (you need one of the following):
- Mobile phone number
- Xfinity user name and password
• Xfinity account number
• Cable modem model number, which is CM1150V
• Cable modem serial number
• Cable modem MAC address
• Cable modem MTA MAC address
Your cable modem’s serial number and MAC address are on the cable modem label.
If you have Xfinity Voice, ask Xfinity to register the phone lines.Note
To activate your Xfinity Internet service:
1. Close all web browsers.
2. Launch a web browser.
You are redirected to the Xfinity self-activation page. If you are not redirected to the Xfinity self-activationpage, visit xfinity.com/activate.
3. Provide your Xfinity credentials and complete the self-activation process.
This process might take up to 10 minutes, during which the cable modem reboots twice.
If you’re unable to activate your Xfinity Internet service using the self-activation page,call Xfinity customer service at 1-800-XFINITY (1-800-934-6489).
Note
Connect Your Cable Modem to a Router After Installation andActivationAfter you install the cable modem and activate your Internet service, you can disconnect the computer andconnect a router to the cable modem.
Hardware Setup
12
Voice Cable Modem
To install your cable modem, use Ethernet port 1.Your cable modem comes withplugs that cover Ethernet ports 2, 3 and 4. These ports can be used to connect arouter that supports Ethernet port aggregation.Your cable modem might not supportEthernet port aggregation the first time that you set it up. Check netgear.com/supportto find out if your cable modem supports Ethernet port aggregation yet.
Note
Figure 6. Connect your cable modem to a router
To connect your cable modem to a router after installation and activation:
1. Reboot your cable modem by unplugging the power cable from the cable modem and plugging it backin.
Wait for the Online LED to stop blinking and light solid green.
2. Use an Ethernet cable to connect the Ethernet port on your cable modem to the WAN or Internet porton the router.
3. Power on your router.
4. Wait until your router is ready.
5. Connect a computer to your router.
For more information about how to set up your router, see the documentation that came with your router.
Perform a Speed TestTo determine the accurate Internet speed, visit speedtest.xfinity.com/ and perform a speed test.
If your actual speed is lower than your subscribed speed, contact XFINITY.
Hardware Setup
13
Voice Cable Modem
2Monitor Voice Telephone Lines
This chapter includes the following sections:
• View Voice Status• View the MTA Call List• View the EMTA Event Log
14
View Voice Status
The cable modem functions as a multimedia terminal adaptor (MTA), allowing the cable modem to providevoice services.You can view some basic MTA voice information.
To view the MTA voice status:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Select Voice.
The Voice Status page displays the following information:
• MTA Provision Status. This is the current MTA provision state.
• MTA MAC Address. This is the MAC address of the MTA interface.
• MTA Telephony Line 1 and Line 2 Status. These are the hook states of line 1 and line 2.
• MTA Line 1 and Line 2 HD Audio Status. These are the MTA HD audio states of line 1 and line2 during codec negotiation. If the lines are enabled, it means that each line is capable of using theG.722 codec.
5. To refresh the Voice Status page, click the Refresh button.
View the MTA Call List
You can view the multimedia terminal adapter (MTA) call list for your cable modem.You can also view thecodec used for the last call and some of the previous calls.
To view or refresh the MTA call list:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Select MTA Call List.
Monitor Voice Telephone Lines
15
Voice Cable Modem
The MTA Call List page displays.
5. To see the most recent entries, click the Refresh button.
View the EMTA Event Log
You can view the embedded multimedia terminal adapter (EMTA) event log for your cable modem.
To view the EMTA event log:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > EMTA Event Log.
The MTA Event Log page displays the EMTA event log.
5. To refresh the page, click the Refresh button.
Monitor Voice Telephone Lines
16
Voice Cable Modem
3Manage Your Network
After you set up the cable modem, you do not need to log in to the cable modem for normal operation. However,you can log in to the cable modem to change a very limited number of settings and monitor the cable modem.
This chapter includes the following sections:
• Log In to the Cable Modem• View Cable Modem Initialization• View Cable Modem Status• View and Clear Event Logs• Specify the Cable Connection Starting Frequency• Change the admin Password• Reboot the Cable Modem• Reset the Cable Modem to Factory Default Settings
17
Log In to the Cable Modem
To log in to the cable modem:
1. Connect a computer to your cable modem.
You can connect a computer to your cable modem using the following methods:
• Connect a computer to your cable modem using an Ethernet connection.
• Connect a WiFi router to your cable modem using an Ethernet connection, and connect a computerto your router using a WiFi or Ethernet connection.
2. Launch a web browser.
3. Enter http://192.168.100.1.
A login window opens.
4. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
View Cable Modem Initialization
You can track the initialization procedure of the cable modem and get details about the downstream andupstream cable channel. The time is displayed after the cable modem is initialized.
The cable modem automatically goes through the following steps in the provisioning process:
1. Scans and locks the downstream frequency and then ranges the upstream channels.
2. Obtains a WAN address for the cable modem.
3. Connects to the Internet.
To view the status of the cable modem initialization:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Select Cable Connection.
The Cable Connection page displays.
Manage Your Network
18
Voice Cable Modem
The Startup Procedure section displays the initialization progress. The page also displays the status ofall downstream and upstream channels. (You must scroll down to view all the channels.) The numberof downstream and upstream channels that are locked depends on the number of channels that yourInternet provider uses.
View Cable Modem Status
To view cable modem status and usage information:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Click the ADVANCED tab.
The ADVANCED Home page displays information about your cable modem.
View and Clear Event Logs
Event logs capture important cable modem events.
To view and clear the event logs:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Event Log.
The Event Log page displays the following information:
• Time. The time the event was recorded.
• Priority. The severity for this event.
• Description. A description of this event.
Manage Your Network
19
Voice Cable Modem
5. To refresh the page, click the Refresh button.
6. To clear the log entries, click the Clear Log button.
Specify the Cable Connection Starting Frequency
The starting frequency is automatically generated. For most Internet connections, you do not need to specifythis information. If you must enter a starting frequency, contact your Internet provider.
To change the starting frequency:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Select Cable Connection.
The Cable Connection page displays the status of all downstream and upstream channels.
5. In the Starting Frequency field, type a number as instructed by your cable Internet provider.
6. Click the Apply button.
Your settings are saved.
Change the admin Password
You can change the default password that is used to log in to the cable modem with the admin user name.
Be sure to change the password for the user name admin to a secure password. Theideal password contains no dictionary words from any language and containsuppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
Note
To set the password for the user name admin:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter or http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
Manage Your Network
20
Voice Cable Modem
4. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5. Type the old password, and type the new password twice.
6. Click the Apply button.
Your settings are saved.
Reboot the Cable Modem
Rebooting the cable modem disconnects all network connections to the cable modem’s local area network(LAN). After the cable modem is finished booting and reestablishes a connection with the Internet, thedevices on your network reconnect to the cable modem’s LAN.
To reboot the cable modem:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. Click the Reboot button.
A confirmation message displays.
6. Click the OK button.
The cable modem reboots.
Reset the Cable Modem to Factory Default Settings
To reset the cable modem to factory default settings, you can use either the Reset button on the back panelof the cable modem or the Factory reset software button. However, if you changed the default passwordthat you use to access the cable modem and lost the password, you must use the Reset button on the backpanel.
After you reset the cable modem to factory default settings, the password is password.The LAN IP addressis always 192.168.100.1.You cannot change this LAN IP address.
Manage Your Network
21
Voice Cable Modem
Use the Reset Button on the Back Panel
CAUTION:
This process erases all settings that you configured in the cable modem.
To reset the cable modem to factory default settings using the Reset button:
1. On the back of the cable modem, locate the Reset button.
2. Using a straightened paper clip, press and hold the Reset button until the cable modem reboots itself.
The configuration is reset to factory default settings. This process takes about one minute.
Use the Factory Reset Software Button
CAUTION:
This process erases all settings that you configured in the cable modem.
To reset the cable modem to factory default settings using the Factory reset software button:
1. Launch a web browser from a computer that is connected to your cable modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and password arecase-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. Click the Factory reset button.
A confirmation message displays.
6. Click the OK button.
The configuration is reset to factory default settings. When the reset is complete, the cable modemreboots. This process takes about one minute.
WARNING:To avoid the risk of corrupting the firmware, do not interrupt the reset. Forexample, do not close the browser, click a link, or load a new page. Do notturn off the cable modem.
Manage Your Network
22
Voice Cable Modem
4Troubleshooting
This chapter provides information about troubleshooting your cable modem.
The chapter includes the following sections:
• Use the LEDs to Troubleshoot• Cannot Log In to the Cable Modem• Troubleshoot the Cable Internet Connection• Troubleshoot Voice Connectivity
23
Use the LEDs to Troubleshoot
The following table provides help when you are using your cable modem's LEDs for troubleshooting.
Table 2.Troubleshooting your cable modem's LEDs
ActionLED Behavior
• Make sure that the power cord is securely connectedto your cable modem and that the power supplyadapter is securely connected to a functioning poweroutlet.
• Make sure that you are using the 12 VDC, 2.5A poweradapter from NETGEAR for this product.
• If the error persists, a hardware problem occurred.Contact Technical Support.
All LEDs are off when the cable modem is plugged in.
• Reset the configuration of the cable modem to itsfactory defaults.
• If the error persists, a hardware problem occurred.Contact Technical Support.
All LEDs stay on.
• Make sure that the Ethernet cable connections aresecure at the cable modem and at the computer,router, or WiFi router.
• Make sure that power is turned on to the connectedhub or computer.
• Be sure that you are using the correct cable.
The Ethernet LED is off for a port with an Ethernetconnection.
Troubleshooting
24
Voice Cable Modem
Table 2.Troubleshooting your cable modem's LEDs (Continued)
ActionLED Behavior
• Make sure that the coaxial cable connections aresecure at the cable modem and at the wall jack.
• Make sure that your Internet service providerprovisioned your cable Internet service.Your ISP canverify that the signal quality is good enough for cablemodem service.
• Remove any excessive splitters that you installed onyour cable line.
The Online LED is off and the cable modem is connectedto the cable wall jack.
The cable modem is too warm and might overheat. Do thefollowing:
1. Disconnect the power adapter.
2. Wait a few minutes to let the cable modem cool down.
3. Make sure that the cable modem is placed in a verticalposition.
4. Make sure that the cable modem is placed in a locationwith good ventilation.
5. Reconnect the power adapter.
The Power LED lights red.
Cannot Log In to the Cable Modem
If you cannot access your cable modemfrom a computer that is connected to your cable modem or to arouter that is connected your cable modem, check the following:
• If your computer is connected to your cable modem with an Ethernet cable, check the connection.
• Make sure that your computer’s IP address is on the same subnet as the cable modem. The IP addressof your computer must be in the range of 192.168.100.2 to 192.168.100.254.
• Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,click the Refresh button to make sure that the Java applet is loaded.
• Try quitting the browser and launching it again.
• Make sure that you are using the correct login information.Your cable modem user name admin islowercase (Caps Lock is off).
If your cable modem does not save changes you made, do the following:
• When entering configuration settings, be sure to click the Apply button before moving to another page,or your changes are lost.
• Click the Refresh or Reload button in the web browser. It is possible that the changes occurred, butthe web browser is caching the old configuration.
Troubleshooting
25
Voice Cable Modem
Troubleshoot the Cable Internet Connection
If your cable modem cannot access the Internet but the Internet LED lights green, make sure that the cableMAC address or device MAC address of your cable modem is registered with Xfinity.
Troubleshoot Voice Connectivity
The following table includes tips for troubleshooting voice connectivity.
Table 3. Quick tips for troubleshooting voice connectivity
Possible SolutionProblem
• If you use a cordless phone, check that the base of your phone is turnedon and receiving power and that the cordless phone battery is not low.
• Check that the phone cable connections are secure at the cable modemand at base of your phone, and that the cable modem is turned on andreceiving power.
No dial tone
• Check that call forwarding is not enabled.
• If you use a cordless phone, check that the ringer is not turned off.
No ringing for incoming calls
It is possible that the calling party blocked its caller ID. If this is true, youmight be able to program your phone to recognize an incoming number andassociate a name with that number.
No caller ID name
Troubleshooting
26
Voice Cable Modem
5Supplemental Information
This appendix covers the following topics:
• Factory Settings• Technical Specifications
27
Factory Settings
The following table shows the factory default settings for the cable modem.
Table 4. Factory default settings
Default SettingFeature
http://192.168.100.1.User login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet connection
1500WAN MTU size
AutoSensingPort speed
Technical Specifications
The following table lists the technical specifications for the cable modem.
Table 5.Technical specifications
SpecificationFeature
• Input: 110–120V, 47–60 Hz
• Output: 12 VDC, 2.5A
Power adapter
• Dimensions (W x D x H): 6.1 x 3.4 x 10.3 in. (155 x 87 x 261 mm)
• Weight: 1.33 lb (603 g)
Physical specifications
• Operating temperature: 32° to 104°F (0° to 40°C)
• Operating humidity: 90% maximum relative humidity, noncondensing
Environmental
• Local: Four 10/100/1000 RJ-45 Gigabit Ethernet ports
• Voice: Two bridged RJ-11 phone ports
• Internet: Coaxial cable connector, DOCSIS 3.0, 3.1;backward-compatible with DOCSIS 2.0
Interface
• 128 MB Flash
• 256 MB RAM
Memory
Supplemental Information
28
Voice Cable Modem
Table 5.Technical specifications (Continued)
• 32 bonded downstream + 2 OFDM
• 8 bonded upstream + 2 OFDMA
Channels
CableLabs certified for U.S. cable Internet services
Certifications
Supplemental Information
29
Voice Cable Modem