Visual Protein 2015
Visual Protein
2015
Four Main Sectors
1. Western Blotting
2. Antibody Production
3. Protein Purification
4. Proteomics
Established in 2005, Visual Protein Biotechnology Corporation is dedicated to enhancing biological developments by providing innovative products and services for research use. Our products are divided into four sectors.
Western Blotting
LumiFlashTM Series
BlockPROTM Series
LuminolPenTM Series
LumiFlashTM Series
Western Blotting
LumiFlash Prime LumiFlash Ultima LumiFlash Infinity
Item No. LF01 LF08 LF16
PackageLF01-500/LF08-500/LF16-500: 250mL SolnA + 250mL Soln B
LF01-100/LF08-100/LF16-100: 50mL SolnA + 50mL Soln BLF01-10S/LF08-10S/LF16-10S: 5mL SolnA + 5mL Soln B
Sensitivity ~6 pg ~1-3pg ~400fg
Exposure time 3min (X-ray film) ~1 min (X-ray film) ~1 min (X-ray film)
Shelf life 14 months from date of despatch
Storage temp. 4°C
Shipping temp. 4°C
LumiFlashTM Series is an ECL substrate with high sensitivity and more competitive price than other brands. Depending on the sensitivity, we offerthree classes: LumiFlash Prime, LumiFlash Ultima, and LumiFlash Infinity.
Product information
Sensitivity ComparisonChart
~6pg ~1-3pg ~400fg
Visual Protein LumiFlash Prime LumiFlash Ultima LumiFlash Infinty
MilliporeLuminata Classico Luminata Crescendo Luminata Forte
- - Immobilon
Thermo PiercePierce ECL - Pierce ECL Plus
- SuperSignal Pico SuperSignal Dura
Advansta - WesternBright ECL kit WesternBright Quantum
PerkinElmer Lightning ECL Lightning ECL Plus Lighting ECL Pro
LumiFlashTM Series
Western Blotting
LumiFlashTM Prime Chemiluminescent Substrate
a. High sensitivity–detect protein target to picogram level
b. Antibody saving–less antibody usage with higher quality result on the WB and ELISA application
c. Low background–provide low background on the WB result
d. Economic–offer excellent quality with lower price
The comparison of WB application for LumiFlash Prime, VisGlow and Luminata Crescendo. Hela cell lysate with 1/2 serial dilution from 20 μg was separated by 12.5% SDS-PAGE and probed by anti β-actin. All results were exposed to X-ray film for 1 minute.
Western Blotting
LumiFlashTM Ultima Chemiluminescent Substrate
a. Bettersignal sensitivity–detection of target protein at low-picogram level on WB and ELISA application
b. Antibody saving–diluted lower antibody concentration for WB and ELISA application
c. Long duration–provide stable signal for long exposure
d. Economy–cost less than other ECL substrate with similar sensitivity level
The comparison of WB application for LumiFlash Ultima, VisGlow Plus and Luminata Crescendo. K562 cell lysate with 1/2 serial dilution from 50 μg was separated by 12.5% SDS-PAGE and probed by anti HSP 47. All results were exposed to X-ray film for 3 minutes.
Western Blotting
LumiFlashTM Infinity Chemiluminescent Substrate
a. High sensitivity–detect femtogram of protein target on PVDF or nitrocellulose membrane
b. Antibody saving–use very low antibody concentration on the WB and ELISA application; diluteprimary antibody 5000 to 20,000-fold and secondary antibody 100,000 to 400,000-fold (from 1mg/mL stock)
c. Low background–provide insignificant background and avoid non-specific signals on the WB result
The comparison of WB application for LumiFlash Infinity and LuminataForte. Hela cell lysate with 1/2 serial dilution from 20 µg was separated by 12.5% SDS-PAGE and probed by anti AMPKα1. All results were exposed to X-ray film for 5 minutes.。
Western Blotting
BlockPROTM Series
BlockPRO™ Series is suitable for blocking in Western blot, ELISA and other immunochemical application. We offer twooptions, both protein-based and synthetic-based, to block excess binding site but not cover on the binding protein and therefore increase the signal intensity, present better data result than milk and BSA blocking buffer.
Product information
BlockPROTM BlockingBlockPROTM Protein-Free Blocking
Buffer
Item No. BP01 BF01
Package BP01-1L: 500mL x 2 BF01-1L: 500mL x 2
Sensitivity Single protein Synthetic
Target customer
For those who are looking for replacement of traditional blocking buffer and caring about the budget
For those who pursue highest quality of experiments
Shelf life 12 month after despatch
Storage temp.After opening,
store at 4°C
Shipping temp. Room temperature
Western Blotting
BlockPROTM Blocking Buffer
a. High efficiency : Increase signal intensity
b. High compatibility : Suitable for downstream PBST and TBST wash procedure and also compatible with every immunochemical application
c. Simple : Safe and ready to use
Signal strength comparison of Casein, BSA, milk, and BlockPRO™ Blocking Buffer. Loading 30 μg cell lysate (HepaG2) and detect with anti-AMPK (mouse, 1:1,000). Secondary antibody : anti-mouse IgG-HRP 1:10,000. Membrane: Hyond™ P. Detection : Hyperfilm™ ECL. All results were exposed for 30 seconds and capture by X-rayfilm.
Membranes detected by SEM. The SEM result showed that BlockPROTM Blocking Buffer only blocking on excess binding site and reveal the position of antigen and therefore will not reduce the signal intensity.
Western Blotting
BlockPROTM Protein-Free Blocking Buffer
a. Protein-free and biotin-free: Suitable for biotin/avidin system
b. Multiple application:suitable for Western blot, dot blot, ELISA, and other immunoassays
c. High quality control: ensure lot-to-lot consistency and reproducible results over time
BlockPRO™ Protein-Free is suitable for various protein antigen detection, such as high molecular weight protein, tACC; phosphoprotein, pAMPK; abundant protein, GAPDH; low molecular weight protein, histone H3.
BlockPROTM Protein-Free Blocking Buffer is better than protein-based blocking buffers (skim milk, BSA and casein) for detection of target protein in Western blotting
Western Blotting
LuminolPenTM Series
LuminolPen™ Series is a perfect tool for chemiluminescent detection in Western blot. With simply writing on the pre-stained marker, the position of the molecular weight can be showed on the image. It could also help you to note the experiment condition or evaluate the efficacy of ECL substrate. We offer two versions of LuminolPen based on their chemiluminesent properties: enzyme-based (LH03) and chemical based (LH604).
Western Blotting
LuminolPenTM , HRP System LuminolPenTM Lite, HRP System
Item No. LH03 LH604
Package
LH03-50: about 1,000 membranesDrawing
LH03-10: about 100 membranesdrawing
LH604-200: about 500 membranesDrawing
LH604-30: about 100 membranesdrawing
Target customer
For those who want to know the predicted molecular weight of target protein in Western blot analysis, but have no budget to buy a gel documentation system.
Shelf life 12 month after despatch
Storage temp. 4°C
Shipping temp. 4°C
Product information
LuminolPen™, HRP System
a. Unique: the world’s first luminescent color development marker pen
b. Help you to evaluate the efficacy of your ECL substrate
c. Convenient: able to make note and show on the image with the data result
d. Compatible: applicable with most brands of ECL substrate
Labeling molecular weight and note on the membrane with LuminolPen™, HRP System.
Western Blotting
After transferring gel proteins onto the nitrocellulose or PVDF membranes and before the procedure of blocking, use the LuminolPen to annotate the prestained marker and perform the following hybridization procedures.
Annotate the standard ladder on the membrane right after gel transfer
LuminolPen™ Lite, HRP System
Western blot detection of GAPDH (36 kD) and annotation of protein standard using LuminolPenTM Lite.
Western Blotting
a. Economic: less expensive than LuminolPenTM, HRP System
b. Help you to evaluate the efficacy of your ECL substrate
c. Convenient: able to make note and show on the image with the data result
d. Compatible: applicable with most brands of ECL substrate
After the procedure of hybridization, use the LuminolPen Lite to annotate the prestainedmarker and perform the following chemiluminescent detection.
Antibody Production
HybriMoreTM Hybridoma Cloning Factor
ImmunoFastTM Adjuvant
HybriMoreTM Hybridoma Cloning Factor
HybriMoreTM Hybridoma Cloning Factor is the first completely defined growth promoting supplement especially for hybridoma cells. It could substantially increase the cloning efficiency of the newly fused hybridoma cells. It also significantly increases thesuccessful rate of monoclonization. The addition of HybriMore will not alter the yield of antibody secretion in hybridoma cells.
Antibody Production
Product information
HybriMoreTM Hybridoma Cloning Factor
Item No. HB01-1L
Package 0.05g/bottle
Target customer For antibody manufacturer and researchers
Shelf life -
Storage temp. 4°C
Shipping temp. 4°C
More colony formation More hybridoma cells No more alteration in antibody production
Up to 10 fold increasing numbers of recovered hybridoma clones. The newly PEG fused hybridomacells were plated into a 96-well plate containing FCS media with HybriMore (green bars), FCS media with feeder layer (blue bars), or regular FCS media (white bars). Hybridoma cells were subject to HAT selection 14 days after the cell fusion. Two mouse myeloma fusion partners, NS-1 and SP2/0, were evaluated by four independent fusion experiments with freshly prepared mouse spleens. A significant higher cloning efficiency was observed in the usage of HybriMore.
Antibody Production
HybriMoreTM Hybridoma Cloning Factor
Increase the successful rate of monoclonization. Eight clones of hybridoma cells from NS-1 or SP2/0 fusion partners were monoclonized in the media containing FCS media with HybriMore (green bars), FCS media with feeder layer (blue bars), or regular FCS media (white bars). The numbers of viable hybridomacolonies in a well were visually counted under a microscope. A significant higher successful rate of monoclonization was observed in the usage of HybriMore.
HybriMoreTM Hybridoma Cloning Factor
Antibody Production
Defined chemicals, no animal source materials, no effect on cell physiology. A clone of hybridoma cells (anti human transferrin, L3B5) was cultured in the media containing FCS media with HybriMore (green bars), FCS media with feeder layer (blue bars), or regular FCS media (white bars) for seven days. The supernatants were harvest and examined by the titer of secreting Ab by ELISA assay. The usage of HybriMore will not alter the yield of secreting Ab in hybridoma cells.
HybriMoreTM Hybridoma Cloning Factor
Antibody Production
ImmunoFastTM Aduvant
ImmunoFast™ Adjuvant is a new aqueous emulsify adjuvant which can efficiently elicit significant immunorespond and induce high amount of IgG production in very short time. The aqueous texture makes the antigen mixing process and the adjuvant injection much easier. The specially designed non toxicity formula provides higher survival rate of immunized animals during experiment period.
Product information
ImmunoFastTM Adjuvant
Item No. IF01
PackageIF01-4N: For 4 injections for mouse
IF01-20N: For 20 injections for mouse
Target customer For antibody manufacturer and researchers
Shelf life 12 month after despatch
Storage temp. Room temp.
Shipping temp. Room temp.
Antibody Production
ImmunoFastTM Aduvant
Antibody Production
ImmunoFastTM can elicit much stronger immuneresponse in animals than CFA method. The comparison of immunoresponse elicited by ImmunoFastTM and CFA (complete Freund Adjuvant) at the 2nd and the 6th week after first immunization. Mice were immunized with 50μg of bovine serum albumin in ImmunoFastTM & CFA . The adjuvant boosted in 2nd, 4th and 6th week. The serum IgG tilters were measured by ELISA.
Less time required for the induction of immunoresponse time. Time required for ImmunoFastTM and CFA/IFA to induce an appreciable immunoresponse. Mice were immunized with 50μg of bovine serum albumin in ImmunoFastTM & CFA / IFA. The adjuvant boosted according to the recommended procedure. Then serum IgG tilters were measured by ELISA.
ImmunoFastTM Aduvant
Antibody Production
ImmunoFastTM elevate the production of IgG. Levels of the elicited immunoglobulin molecules in an ImmunoFastTM boosted animal. Mice were immunized with 50μg of bovine serum albumin in ImmunoFastTM. The adjuvant boosted in 2nd, 4th and 6th week. Then IgG and IgM tilters were measured by ELISA.
Protein Purification
ExtractPROTM Protein Extraction Reagent
FracPROTM Protein Fractionation Kit
PhosPROTM Phosphoprotein Enrichment Kit
PhosPROTM Phosphoprotein Purification Kit
ExtractPROTM Protein Extraction Reagent
Shorten experiment time with lower cost
Protease inhibitor and freeze/thaw cycle are not required
Compatible for most bio-samples, including plant, animal, tissue, and microorganism protein extraction
Effectively maintain protein condition during long term preservation with only ExtractPRO™ reagent
Protein Purification
Product information
ExtractPROTM Protein Extraction Reagent
Item No. EP05-30
Package 30mL solution
Target customer For protein research
Shelf life 12 month after despatch
Storage temp. 4°C
Shipping temp. 4°C
Protein extract efficiency with different sample source. Cell line (K562), animal tissue (pig liver), fungi (PE1), and bacteria (E. coli) extracted by freeze and thaw or ExtractPRO™; 12.5% SDS-PAGE stained by CBR method. ExtractPRO™ extract high amount of total protein from different sample than traditional freeze and thaw method.
Protein Purification
ExtractPROTM Protein Extraction Reagent
Comparison of sample preparatrion by the ExtractPROTM Protein Extraction Reagent with freeze and thaw method. HepaG2 cell is prepared by traditional sample preparation (freeze & thaw) and ExtractPROTM Protein Extraction Reagent. The 2D-PAGE treated by ExtractPRO has lower background than by traditional sample preparation.
Total protein extract amount after storage in ExtractPRO. Cell line SP-2 preserved in Extract-PRO without protease inhibitor for 0, 14, and 28 days. Protein quantified by bradford method. The protein portion in sample is well preserved during long-term storage in ExtractPRO,
Protein Purification
ExtractPROTM Protein Extraction Reagent
• Online Video
FracPROTM Protein Fractionation Kit
Product information
FracPROTM Protein Fractionation Kit
Item No. FP01-5 FP01-50
Package
10ml Cytosol buffer +10ml Membrane/Organelle buffer +
7.5ml Nuclear buffer +1.5ml Cytoskeletal buffer
100ml Cytosol buffer +100ml Membrane/Organelle buffer +
75ml Nuclear buffer +15ml Cytoskeletal buffer
Target customer
For protein fractionation experiment
Shelf life 12 month after despatch
Storage temp.
4°C
Shipping temp.
4°C
Protein Purification
FracPROTM Protein Fractionation Kit is a simple, reproducible and ultracentrifuge-independent method to separate four subcellular protein fractions, including nuclear, cytosol, membrane/organelle, and cytoskeletal fractions, in a detergent-based microcentrifuge procedure. All of the separated fractions from FracPROTM Protein Fractionation Kit can directly be used in SDS-PAGE, enzyme analyses, Western blotting, gel mobility shift assays, and other procedures.
FracPROTM Protein Fractionation Kit
Protein Purification
The Protein fractions of Human leukemia cell line (K562) were separated by FracPRO™ Protein Fractionation Kit and presented by Western blot.
Variable sample application including cultured cells and mammalian tissues
Separate and collect four subcellular protein fractions in short time
Isolate high quality protein fractions with easy procedure
PhosPROTM Phosphoprotein Enrichment Kit
PhosPROTM Phosphoprotein Enrichment Kit
Item No. PP03-2C PP03-6C PP03-5E
Package
2 pre-packed column +2ml Lysis buffer +
250ml System buffer +100ml Elution buffer+100ml Stringent buffer
stock
6 pre-packed column +2ml Lysis buffer +
250ml System buffer +100ml Elution buffer+100ml Stringent buffer
stock
3 ml Resin +2ml Lysis buffer +
250ml System buffer +100ml Elution buffer+100ml Stringent buffer
stock
Target customer For phosphoprotein research
Shelf life 6 months after despatch
Storage/shipping temp.
4°C
Product information
PhosPROTM Phosphoprotein Enrichment Kit is based on IMAC (immobilized metal affinity chromatography), which can isolate the most amount of phosphoprotein from different biological materials, such as animal, plant, and microorganism.
Protein Purification
Purification efficacy of PhosPRO™ Phosphoprotein Enrichment Kit (A) and Brand Q kit (B). Protein standard markers contain glycogen phosphorylase b (GP), bovine serum albumin (BSA), ovalbumin (OVA), carbonic anhydrase (CA), trypsin inhibitor (TI), and lactalbumin (LAC) were used for evaluation. Ovalbumin was the only phosphoprotein in the test material. F: flow through; E: eluent; VisPRO™ 5 minute Protein Stain Kit (VisPRO™) and Pro-Q Diamond stain (Pro-Q, from Invitrogen) were used for developing total proteins or phosphoproteins.
Optimize suitable chromatographic condition with PhosPRO™ Phosphoprotein Enrichment Kit.
A) B)
Protein Purification
PhosPROTM Phosphoprotein Enrichment Kit
PhosPROTM Phosphoprotein Purification Kit
Product information
PhosPROTM Phosphoprotein Purification Kit
Item No. PP05-2C PP05-6C PP05-5E
Package
Pre-packed column package2 pre-packed column +
2ml Lysis buffer +250ml System buffer +100ml Elution buffer +
100ml stringent buffer stock
Pre-packed column package6 pre-packed column +
2ml Lysis buffer +250ml System buffer +100ml Elution buffer +
100ml stringent buffer stock
Evaluation package 3ml resin +2ml Lysis buffer +
250ml System buffer +100ml Elution buffer +
100ml stringent buffer stock
Target customer
For phosphoprotein research
Shelf life 6 months after despatch
Storage/shipping temp.
4°C
Protein Purification
PhosPROTM Phosphoprotein Purification Kit is based on IMAC (immobilized metal affinity chromatography), which can isolate the phosphoprotein and ensure its purity from different biological materials, such as animal, plant, and microorganism.
Purification efficacy from (A) PhosPRO® Phosphoprotein Purification Kit, (B) Brand Q kit. Protein standard markers containing glycogen phosphorylase b (GP), bovine serum albumin (BSA), ovalbumin (OVA), carbonic anhydrase (CA), trypsin inhibitor (TI) and lactalbumin (LAC) were used for evaluation. Ovalbumin was the only phosphoprotein in the test material. F: flow through; E: eluent. VisPRO® 5 minute Protein Stain Kit (VisPRO) and Pro-Q Diamond stain (Pro-Q, from Invitrogen) were used for developing total proteins or phosphoproteins.
Protein Purification
PhosPROTM Phosphoprotein Enrichment Kit
Proteomics
VisPROTM 5 Minutes Protein Stain Kit
IEF Optimizer
VisPROTM 5 Minutes Protein Stain Kit
Proteomics
VisPROTM 5 minutes Protein Stain Kit
VisPROTM 5 minutes Protein Stain Kit (5X)
VisPROTM 5 minutes Protein Stain Kit (10X)
Item No. VP01 VP05 VP10
Package
VP01-125: 125ml soln.1 + 125ml soln.2
VP01-500: 500ml soln.1 + 500ml soln.2
VP05-125: 5X 125ml soln.1 + 125ml soln.2
VP05-500: 5X 500ml soln.1 + 500ml soln.2
VP10-1L: 10X 500ml soln.1 + 500ml soln.2
Target customer For protein research, especially the downstream procedure
Shelf life 26 month after despatch
Storage/shipping temp.
Room temp.
Product information
VisPROTM 5 minutes Protein Stain Kit is a reverse staining method, which is a modified version of the imidazole- zinc reverse stain, designed for convenience and superior performance. The stained target protein can be eluted directly and apply downstream experiments, such as Western blotting, LCMSMS analysis. The staining solution is also highly stable, non-biohazard to operator and environment.
VisPROTM 5 Minutes Protein Stain Kit
Proteomics
VisPRO applies the principle of zinc stain. The formation of zinc-imidazole complex on polyacrylamide turns the gel to white, while the protein area remain transparent.
Most protein gel staining methods apply the principles of positive staining, such as CBR、silver stain、SYBRO ruby.
VisPROTM 5 Minutes Protein Stain Kit
Proteomics
Unlike conventional positive staining methods, reverse staining can be completed in a short time because the target of staining is the gel rather than the proteins. Therefore, reverse staining methods allow researchers to obtain the results promptly.
VisPROTM 5 Minutes Protein Stain Kit
Proteomics
VisPROTM 5 Minutes Protein Stain kit perfectly matches to current proteomic research. More protein spots can befoundon the two-dimensional electrophoresis (2-DE) gel developed with the VisPROTM 5 Minutes Protein Stain Kit (right) than the one developed with other high sensitivity protein staining methods, such as silver stain (left).
VisPROTM 5 Minutes Protein Stain Kit
Proteomics
MALDI-TOF analysis of protein spots visualized with the VisPROTM 5 minutes Protein Stain Kit. The gel spot of rabbit phosphorylase b (10 ng) was cut and subjected to mass spectrometry. Twenty-two out of fifty signals were categorized as tryptic fragments of phosphorylase b.
IEF Optimizer
IEF Optimizer is a novel and convenient instrument which can measure the salt content of the two-dimensional electrophoresis (2-DE) samples. In combined with IEF salt meter and the online accessible voltage-hour calculator, IEF Optimizer can provide you a suggested total voltage hour for IEF process, avoiding underfocusing and overfocusing of proteins and not only give you reproducible data but also accuracy.
Proteomics
IEF Optimizer
Item No. IOR01
DiscriptionIEF Salt Meter + Voltage-Hour Calculator (Online Software)
registration card
Targetcustomer
2D Gel Electrophoresis user
Product information
IEF Optimizer
Proteomics
Providing the accurate salt content measurement of 2-DE samples and optimal IEF total voltage hour for 2-DE samples
Increasing the reproducibility of 2-DE result
Reducing underfocusing and overfocusing of 2-DE experiments, particularly analyzing precious clinical samples during DIGE experiments
Online video
IEF Optimizer
Proteomics
Optimum parameters provided by IEF Optimizer show better results than the suggested protocol
Sample: pig liver1-D electrophoresis is from pH 3-10. 2-DE using 12.5% SDS-PAGE. (LEFT) Results obtained according to the manufacturers’ instruction handbook. (RIGHT) Result obtained according to the IEF Optimizer parameter.
If you have any questions about the product, please contact at [email protected]
Contact us