work chairs visio overview • Visio Chairs have been designed and tested for users weighing up to 300 lbs • Visio Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces could result in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealer for appropriate selection • Task Chair with Synchro-Tilt shown Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point. Back Tilt Lock (Not shown) Tension Control Seat Slider/ Seat Depth Adjustment of 2 1/2" Five Star Base 2 3/8" Arm Height Adjustment 2D - 4" 4D - 4 3/4" Seat Height Adjustment: Standard 16 1/2" - 20 1/2" High 17"-22" Low 14 1/2" - 17 1/2" Plastic Back Frame Statement of Line Total Arm Width Adjustment: 2D - 3" 4D - 4 1/4" Flexweave Back Fabric Lumbar Apex Height Adjustment of 3" Lumbar Depth Range of 0.6" Mid-Back – No Arms Mid-Back – 2D Arms Mid-Back – Fixed T-Arms Mid-Back – 4D Arms With Headrest Fixed T-Arms With Headrest seating price & user guide – September 28, 2015
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
work chairs
visio overview
• Visio Chairs have been designed and tested for users weighing up to 300 lbs• Visio Chairs are equipped with casters intended for use on carpeted surfaces. Use of these casters on hard surfaces couldresult in unexpected rolling and tipping. Casters designed for use on hard surfaces are available. If in doubt, see your dealerfor appropriate selection
• Task Chair with Synchro-Tilt shown
Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point.
For Conversion to Metric, multiply dimension by 25.4.
COM/COL Material Requirement
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching. Leatheryield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size andshape of hide. The size of the sewing pattern and the number of units ordered may also impact yield. Always round-up to thenext hide.
Leaning back, determine if theresistance of the chair iscomfortable. For less resistance,pull the tension adjustment knobout and turn it counterclockwise.For greater resistance, turn theknob clockwise.
To adjust the angle of reclination,push the lever down to unlock theback. Recline to the desiredposition and lift the lever up tolock in place or leave to allowbackrest to recline freely.
To adjust the seat depth, depressthe button and simultaneously liftyour weight from the seat whilesliding the seat forward orbackward. Release the button tolock the seat in place.
To raise the chair, lift the lever upwhile lifting your weight from theseat until you reach the desiredlevel, then release to lock in place.To lower the chair, lift the lever upand allow your weight to push theseat down until you reach thedesired level, then release to lockin place.
To adjust the headrest depth,depress the button and pull orpush the headrest forward orbackward. Release the button tolock the headrest in place.
To adjust the headrest height,depress the button and raise orlower the headrest to the desiredheight. Release the button to lockthe headrest in place.
work chairs
seating price & user guide – September 28, 2015
work chairs
seating price & user guide – September 28, 2015
2D/4D ARM WIDTH ADJUSTMENT 2D ARM HEIGHT ADJUSTMENT
4D ARM HEIGHT ADJUSTMENT 4D ARM PIVOT ADJUSTMENT
4D ARM SLIDER ADJUSTMENT LUMBAR ADJUSTMENT
To pivot the arm cap, grasp thearm, rotate inward or outward andrelease at the desired position.
To adjust the arm height, press thesmall button located behind eitherarm to raise or lower it to thedesired position. Release thebutton to lock in place.
To adjust the arm height, press thesmall button on the outside ofeither arm to raise or lower it tothe desired position. Release thebutton to lock in place.
To adjust the arm cap depthposition, grasp the arm cap andfirmly slide forward or backwardto the desired position.
To adjust the lumbar height, grasplumbar pad while seated and slideit up or down to the desiredposition. For lumbar depthadjustment, press the pad inward;depress buttons to release tooriginal position.
visio adjustment features & instructions (continued)
To adjust the width of eacharm, push the lever down andslide the arm to the desiredposition. Pull the lever up tolock the arm in place.
N V I TVisio – Task Chair
FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Lumbar height adjustment of 3"• Three position lumbar depth adjustments of 0, 0.3" and 0.6" with total range of 0.6"• 4D arm pivots 20˚• 4D arm depth is adjustable• Seat depth adjustment of 2 1/2"• Back-tilt can be locked in three positions or left free flow• Ebony base is available in plastic only• Synchro-tilt 2:1 ratio• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESHeadrest is finished in Black vinyl.
FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Lumbar height adjustment of 3"• Three position lumbar depth adjustments of 0, 0.3" and 0.6" with total range of 0.6"• 4D arm pivots 20˚• 4D arm depth is adjustable• Seat depth adjustment of 2 1/2"• Back-tilt can be locked in three positions or left free flow• Ebony base is available in plastic only• Synchro-tilt 2:1 ratio• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESHeadrest is finished in Black vinyl.