VIII-3_2012-FS-5983

LED Component Solutions I n n o v a t i o n i n L i g h t i n g Te c h n o lo g y

MICROCOMPUTERS • SYSTEMS • COMPONENTS • VERTRIEBS GMBH

Edit

ion

1/20

12

DISTRIBUTOR OF

2

W e l c o m e T O a n e w e r a o f L i g h t i n g

From the LED to the Complete Lighting Solution

Powerful LEDs are advancing ever more to the fore as ultra-modern lighting, not least because of rising energy prices and due to Ordinance 245/2009 of the European Commission, which defines the basic parameters for opting out of obsolete lighting technologies and opens up enormous potential for the deployment of LEDs in the lighting market. In the next few years, LED lighting should account for more than ten percent of turnover with a worldwide market vol-ume of some 1.4 billion dollars.

It is to be expected that the lighting sector will develop into the main money-maker for electronic component distribu-tors by 2015.

Apart from their environmental acceptability, high-quality lighting diodes are above all up to ten times more energy efficient and offer more versatile design possibilities than conventional lighting.

A further plus factor of the LEDs is their extremely long service life, which can lie between 25.000 and up to 100.000 hours depending on their design. Apart from the supply of all components required, the realisation of in-novative lighting systems based on powerful LEDs also requires specialist technical and economic knowledge.

Above all, technical knowledge of high power LEDs and high-brightness LEDs, secondary optics and driver electronics as well as ingenious heat management are required. The experts at the MSC lighting competence centres support you here with sound technical and economic consulting expertise when planning your lighting.

MSC works with leading manufacturers in the LED fields and supplies everything in one package from the LED to the complete lighting system. Be inspired by the many possibili-ties of modern LED technology and arrange an appointment with our experts today.

MSC – Excellence in LEDs

Lighting

3

■ Cromaticity Diagramm 4

■ Cree Brightness Performance Groups 6

■ Cree Xlamp LED Product Portfolio 8 Cree LEDs for Lighting Application Matrix 9 Cree Lighting LED Components 9

■ XLamp®

XB-D LED 10

XT-E LED 11

XP-E LED 12

XP-C LED 13

XP-G LED 14

XM-L LED 15

XM-L Easy White LED 16

ML-B LED 17

ML-C LED 18

ML-E LED 19

MX-3 LED 20

MX-3S LED 21

MX-6 LED 22

MX-6S LED 23

XLamp® MC-E LED 24

MP-L EasyWhite™ LED 25

XR-E LED 26

XR-C LED 27

MT-G EasyWhite™ LED 28

CXA2011 LED 29

■ Optics

Optics from Carclo 30

Optics from Gaggione 32

Optics from Khatod 34

Optics from Ledil 36

PCBs 38

■ Drivers & Controllers

Intelligent LED Drivers 40

Driver ICs and DC/DC Converters 42 for HB LED Control

Lighting ASSP for 43 Fluorescent Ballast

Microcontrollers for LED 44 Lighting Control

AC/DC LED Controller 45 DC/DC LED Controller LED Drivers for RGB Clusters

AC/DC LED Power Supply 46

DC/DC Constant Current LED Drivers 48

■ LED Lighting Connector Solutions 51

■ Intelligent Development 55

LEDs

SEconDary opticS

pcBs

connEctorS

DEvELopmEnt

DrivErS & controLLErS

4 5

Cromaticity DiagrammCree’s Standard Chromaticity Regions plotted on the 1931 CIE Curve

In 1931, the International Commission on illumination (CIE) devised a method for representing colour. The CIE 1931 Chromaticity Diagram is a tool intended to illustrate the way the human eye experiences light, using an x, y coordi-nate system. The outer boundary represents colours with a purity of 100% and the wavelength is listed in nanometers.

Data sheet download: www.cree.com/products/pdf/XLampXP-G.pdf www.cree.com/products/pdf/XLampXP-E.pdf www.cree.com/products/pdf/XLampXP-C.pdf

4 5

Cree’s Standard Chromaticity Regions plotted on the 1931 CIE Curve

ANSI Cool White5000 K - 10000 K

ANSI Neutral White and ANSI Warm White 2600 K - 5000 K

Warm White 2600 K - 3700 K

Neutral White 3700 K - 5000 K

Outdoor White 4000 K - 5300 K

Cool White 5000 K - 8300 K

■ ANSI Binning

■ Stand Binning

Cool White and Outdoor White 3700 K - 10000 K

6 7

Cree Brightness Performance Groups

Group Code

Min. Luminous Flux @ 350 mA (lm)

Max. Luminous Flux @ 350 mA (lm) Serie

J 23.5 30.6K2 30.6 35.2K3 35.2 39.8M2 39.8 45.7

XRC

M3 45.7 51.7N2 51.7 56.8N3 56.8 62

XPC

XRE

N4 62 67.2

XPE

P2 67.2 73.9P3 73.9 80.6

XPEH

EW &

XPG

P4 80.6 87.4

XB-D

Tj =

85°

C

Q2 87.4 93.9

XT-E

Tj =

85°

C

Q3 93.9 100Q4 100 107Q5 107 114R2 114 122R3 122 130R4 130 139R5 139 148S2 148 156S3 156 164

Group Code



P2 67.2 73.9 MX6

P3 73.9 80.6

MX6 / MX3

P4 80.6 87.4

Q2 87.4 93.9

Q3 93.9 100

Q4 100 107

Q5 107 114

R2 114 122

Group Code



P2 67.2 73.9

MX3S

P3 73.9 80.6

P4 80.6 87.4

Q2 87.4 93.9

Q3 93.9 100

Q4 100 107

Q5 107 114

R2 114 122

Group Code

Min. Luminous Flux @ 60mA (lm)


P3 73.9 80.6

MX6S

P4 80.6 87.4

Q2 87.4 93.9

Q3 93.9 100

Q4 100 107

Q5 107 114

R2 114 122

R3 122 130

R4 130 139

Group Code



F 210 240

MCE

G 240 280

H 280 320

J 320 370

K 370 430

M 430 490

Group Code



S6 182 200

XML

T2 200 220

T3 220 240

T4 240 260

T5 260 280

T6 280 300

U2 300 320

Group Code

Min. Luminous Flux @ 1100 mA, 6 V;@ 185 mA, 36 V

Max. Luminous Flux @ 1100 mA, 6 V; @ 185 mA, 36 V

Serie

D0 400 440

MTG

E0 440 480

F0 480 520

G0 520 560

H0 560 600

J0 600 650

Group Code

Min. Luminous Flux @ 270 mA, Tj=85 C°

Max.Luminous Flux @ 270 mA, Tj=85 C° Serie

E0 590 680

CXA2011

F0 680 780

G0 780 900

H0 900 1040

J0 1040 1200

K0 1200 1380

Group Code



HO 18.1 23.5MLB

JO 23.5 30.6

Group Code



K2 30.6 35.2

MLE

K3 35.2 39.8

M2 39.8 45.7

M3 45.7 51.7

N2 51.7 56.8

N3 56.8 62

Group Code



HO 18,1 23,5

MLC

J2 23,5 26,8

J3 26,8 30,6

K2 30,6 35,2

K3 35,2 39,8

6 7

Colour Specification / Bin and Order Code Format

XXXXXX-L1- Standard White Typical CRI for Cool & Neutral White is 75 3.700 - 10.000K

XXXXXX-01- Outdoor White Typical CRI for Warm White is 80 2.600 - 3.700K

XXXXXX-H1- 80-CRI White Minimum CRI is 80 4.000 - 5.300K

XXXXXX-P1- 85-CRI White Minimum CRI is 85 –

XXXXXX-U1- 90-CRI White Minimum CRI is 90 –

Bin codes and order codes are configured in the following manner:

SeriesXPE = XP-EXPC = XP-CXPG = XP-G Colour specificationL1 = White01 = Outdoor WhiteH1 = 80 CRIP1 = 85 CRIU1 = 90 CRI Kit number Internal code Colour WHT = WhiteHEW = High-Efficiency WhiteROY = Royal BlueBLU = BlueGRN = GreenAMB = AmberRDO = Red-OrangeRED = Red

SSSCCC-BD-HHHH-NNNNN

Order Code

SeriesXPE = XP-EXPC = XP-CXPG = XP-G Colour specificationL1 = White01 = Outdoor WhiteH1 = 80 CRIP1 = 85 CRIU1 = 90 CRI Luminous or radiant flux group Internal code

Forward voltage group(amber, red-orange, red, high-efficiency white)

Chromaticity ordominant-wavelength group Colour WHT = WhiteHEW = High-Efficiency WhiteROY = Royal BlueBLU = BlueGRN = GreenAMB = AmberRDO = Red-OrangeRED = Red

SSSCCC-BD-WWW-FF-G-AA

Bin Code

Colour Specifications

8 9

Cree Xlamp LED Product Portfolio

8

DR

IvE

RS

& C

ON

TR

OL

LE

RS

LE

Ds

Multiple Die

Xlamp ML-B ML-C ML-E MX-3 MX-3S MX-6 MX-6S MC-E standard

MC-E EZW

MP-L EZW

MT-G

Footprint (mm) 3.5 x 3.5 6.5 x 5.0 7.0 x 9.0 12.15 x 13.15 9.11 x 9.11

Max Current 175 mA 350 mA 500 mA 400 mA 150 mA 1000 mA 175 mA 700 mA (per LED)

700 mA (per LED)

250 mA(per string)

4000 mA

viewing Angle 120° 120° 120° 120° 120° 120° 120° 110° 110° 125° 120°

cool White - flux 23.5 lm 35.2 lm 51.7 lm 114 lm 114 lm 114 lm 130 lm 430 lm 280 lm NA 400 - 560 lm

Typical CRI 75 75 75 75 75 75 75 75 75 NA NA

Binning ANSIsub-bins

ANSIsub-bins

standardbins

EZW bin NA EZW

neutral White - flux NA NA 370 lm NA900 lm @150

mA (per string)

–

Typical CRI NA NA 75 75 80 –

Binning NA NA ANSIbins

EZWbins

EZWbin –

Warm White - flux 23.5 lm 30.6 45.7 lm 100 lm 100 lm 100 lm 114 lm 320 lm 320 lm800 lm @150

mA (per string)

–

Typical CRI 80 80 80 80 80 80 80 80 80 80+ –

Binning ANSIsub-bins

ANSIsub-bins

ANSIbins

EZWbins

EZWbins NA

White

White

Single Die

Xlamp XR-C XR-E XB-D XT-E XP-C XP-E XP-E outdoor

XP-G XP-G outdoor

XM-L

Footprint (mm) 7.0 x 9.0 2.45 x 2.45 3.45 x 3.45 3.45 x 3.45 5,0 x 5,0

Max Current 500 mA Up to 1000 mA 1000 mA 1500 mA 500 mA 1000 mA 1000 mA 1500 mA 1500 mA 3000 mA

viewing Angle 90° 90° 115° 115° 115° 115° 115° 125° 125° 125°

cool White - flux 87.4 lm 107 lm 130 lm 139 lm 100 lm 122 lm NA 139 lm NA 280 lm

Typical CRI 75 75 NA NA 75 75 NA 75 NA 75

Binning standardbins

ANSI bins

ANSI bins

ANSIbins NA ANSI

bins NA ANSI bins

neutral White - flux 80.6 lm 93.9 lm 122 lm 130 lm 87.4 lm 107 lm 114 lm 122 lm 130 lm 260

Typical CRI 75 75 75 75 75 75 70 75 70 NA

Binning ANSIbins

ANSIbins Ansi ANSI

sub-binsANSIbins

ANSIsub-bins

ANSIbins NA

Warm White - flux 67.2 lm 89.6 lm 107 lm 114 lm 73.9 lm 93.9 lm NA 107 lm NA 220

Typical CRI 80 80 80 80 80 80 NA 80 NA NA

Binning ANSIbins

ANSIbins

ANSIbins

ANSIsub-bins NA ANSI

sub-bins NA NA

8 9

Cree LEDs for Lighting Application Matrix

9

LE

Ds

Discretes Arrays Modules

indoor

Non-directionalA & E Bulbs, Sconces MX-6 XP-E

HEW CXA20 LMR4 LMR2

DirectionalMR & PAR, Spot, Track

XP-GXP-E XM-L MC-E MP-L

DownlightCeiling Mount, Pendant MX-6 XP-E

HEW MP-L CXA20 LMR4 LMR2

DistributedCove, FL Retrofit

ML-EML-B

MX-6MX-3

Low & high BayWarehouse, Industrial XP-G XM-L

outdoor

Roadway & ParkingStreet, Tunnel, Garage XP-G XM-L

Exterior AreaBollard, Wall Pack MX-6 XP-E

HEW CXA20 LMR4

Landscape ML-E MC-E

portable

Mainstream ML-E XP-E

High EndSearch, Lantern, Spot XR-E XP-G

XP-E

Cree Lighting LED Components

Ease of Use

Discretes Arrays Modules

Directional

XM-L

XP-GXP-EXP-C

XR-EXR-C

MT-G

MP-L

XM-L EZW

MC-E

Non-directional

XP-E HEW

MX-6MX-3

ML-EML-B

CXA20

LMR4

LMR2

Ethe

rnet

pE

rf

or

ma

nc

E

Ethe

rnet

pE

rf

or

ma

nc

E

Ethe

rnet

pE

rf

or

ma

nc

E

Ethe

rnet

pE

rf

or

ma

nc

E

Ethe

rnet

pE

rf

or

ma

nc

E

10 1110

LE

Ds

Smallest lighting-class LED enables dramatically lower system cost

XLamp® XB-D White LEDs

The XLamp XB-D is Cree’s newest lighting class LED, bringing the next generation of performance and price to LED lighting applications. The XLamp XB-D delivers similar performance to the XP-G LED in a package that is 48% smaller than the XLamp XP footprint.

Using Cree’s newest generation of silicon carbide-based LED chips, XB-D is optimized to dramatically lower system cost in any illumination application.

Featuresn Cree’s smallest lighting class LED: 2.45 X 2.45 mmn Up to 136 lm/W in cool white (@ 85 °C, 350 mA)n Available in white, 80-min CRI white, and 70-min CRI cool whiten 1 A maximum drive currentn Low thermal resistance: 6.5 °C/W

Product Specifications

Part Number Package Type

Colour Colour Temp.

(°K)

Dominant Wavelength

(nm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (mW)

Luminous Intensity

(mcd)

XBDAWT-00-0000-00000XXXX Xlamp XB-D

Cool White 5.000 - 8.300 NA 1000 350 2,9 115 114 - 130 NA

Neutral White 3.750 - 5.000 NA 1000 350 2,9 115 93,9 - 122 NA

Warm White 2.700 - 3.750 NA 1000 350 2,9 115 80,6 - 107 NA

80-CRI White 2.600-4.300 NA 1000 350 2,9 115 87.4-100 NA

Data sheet download: www.cree.com/products/xlamp_xbd.asp

XLamp® XB-D WarmWhite

The CREE XB-D LEDs is the first LED family which is hot-binned across all CCTs. So don´t forget: Characterized and binned at 85°C!

n Wide viewing angle: 115°n Reflow solderable - JEDEC J-STD-020C compatiblen Unlimited floor life at ≤ 30 °C/85% RHn Electrically neutral thermal pathn RoHS- and REACH-compliant

For information please contact: [email protected] · Tel. +49 6233 347-120

10 11

LE

DsHighest-performing lighting-class LED

XLamp® XT-E

Cree XLamp XT-E White LEDs are the highest-performance white LEDs available. The XT-E LED delivers twice the lumens-per-dollar of previously available LEDs in the popular XP footprint. By leveraging the popular XP footprint, customers can easily incorporate the XT-E LED into existing XP LED designs to shorten design cycle and improve time to market.

Built using the latest generation of Cree’s silicon carbide based LED chips that deliver higher flux and efficacy, the XLamp XT-E White LEDs set new standards of efficacy, light extraction and quality. Designed to accelerate LED lighting adop-tion, the XT-E LED delivers up to 148 lumens and 148 lumens per watt in cool white (6000 K) or up to 114 lumens and 114 lumens per watt in warm white (3000 K), both at 350 mA, 85°C.

Featuresn Available in white, 80-CRI min white, 70-min CRI white and royal bluen Binned at 85 °Cn Cool white efficacy of up to 148 lm/W (@ 85 °C, 350 mA)n Royal Blue wall plug efficiency of up to 53% (@ 85 °C, 350 mA)n Wide viewing angle: 115-140°n Thermal resistance: 5 °C/Wn Maximum drive current: 1.5 A

Lighting Applicationsn General and directional lighting applications

XLamp® XT-E Warm White



Colour Colour Temp.

(°K)

Dominant Wavelength

(nm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (mW)

Luminous Intensity

(mcd)

XTEAWT-00-0000-00000XXXX Xlamp XT-E

Cool White 5.000 - 8.300 NA 1500 350 2,85 115 122 - 139 NA

Neutral White 3.750 - 5.000 NA 1500 350 2,85 115 100 - 139 NA

Warm White 2.700 - 3.750 NA 1500 350 2,85 115 87,4 - 122 NA

XTEHvW-Q0-0000-00000XXXXXLamp XT-E High Voltage

Version

Cool White 5.000 - 8.300 NA 66 22 46 115 100 - 114 NA

Neutral White 3.750 - 5.000 NA 66 22 46 115 80,6 - 107 NA

Warm White 2.700 - 3.750 NA 66 22 46 115 67,2 - 87,4 NA

XTEARY-00-0000-000000XXX XLamp XT-E Royal Blue NA 450 - 465 1000 350 3,5 140 475 - 500 NA

Data sheet download: www.cree.com/products/xlamp_xte_awt.asp

XLamp® XT-E Cool White

Don´t forget, also characterized and binned at 85°C!

n Electrically neutral thermal pathn Vf binning supported for XT-E White and Royal Bluen XT-E Royal Blue sorted into 2.5-nm- wavelength binsn Unlimited floor life at ≤ 30 ºC/85% RHn Reflow solderable - JEDEC J-STD-020C Compatiblen RoHS- and REACH-compliant

XLamp® XT-E Royal Blue

12

Lighting-Class Performance, Small Package

XLamp® XP-E LED

LE

Ds


FeaturesnAvailable in white, royal blue, blue, green, amber, red, red-orangenLow thermal resistance: as low as 9 °C/WnMaximum junction temperature: 150 °CnUnlimited floor life at ≤ 30° C/85 % RHnReflow solderable - JEDEC J-STD-020C compatiblenElectrically neutral thermal path

The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. This smaller package extends Cree’s award-winning LED performance into new LED lighting applications.

ApplicationsnPortablenLED light bulbsnArchitecturalnSignage

nRetail displaynTransportationnEmergency vehicle

Part Number Pack-age

Type

Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

XPEWHT-L1-0000-00XXX

XLamp XP-E

Cool White 5.000 - 10.000 NA 1000

350

3,2 115 100 - 122 NA

Neutral White 3.700 - 5.000 NA 1000 3,2 115 80,6 - 107 NA

Warm White 2.600 - 3.700 NA 1000 3,2 115 73,9 - 100 NA

Outdoor White 4.000 - 5.300 NA 1000 3,2 115 100 - 122 NA

XPEROY-L1-0000-00XXX Royal Blue NA 450 - 465 1000 3,2 130 350 - 500 mW NA

XPEBLU-L1-0000-00XXX Blue NA 465 - 485 1000 3,2 130 30,6 - 39,8 NA

XPEGRN-L1-0000-00XXX Green NA 520 - 535 1000 3,4 130 80,6 - 107 NA

XPEAMB-L1-0000-00XXX Amber NA 585 - 595 500 2,1 130 45,7 - 62,0 NA

XPERDO-L1-0000-00XXX Red Orange NA 610 - 620 700 2,1 130 56,8 - 87,4 NA

XPERED-L1-0000-00XXX Red NA 620 - 630 700 2,1 130 45.7 - 73,9 NA

XPEWHT-H1-0000-00XXX 80-CRI White 2.600 - 4.300 NA 1000 3,3 115 73,9 - 100 NA

XPEWHT-P1-0000-00XXX 85-CRI White 2.600 - 3.200 NA 1000 3,3 115 56,8 - 80,6 NA

XPEWHT-U1-0000-00XXX 90-CRI White 2.600 - 3.200 NA 1000 3,3 115 56,8 - 73,9 NA

XPEHEW-L1-0000-00XXX HEW Cool White 5.000 - 8.300 NA 1000 3,3 115 122 - 139 NA

XPEHEW-01-0000-00XXX HEW Outdoor White 2.600 - 5.300 NA 1000 3,3 115 100 - 130 NA

XPEHEW-L1-0000-00XXXHEW Neutral White 3.700 - 5.000 NA 1000 3,3 115 107 - 122 NA

HEW Warm White 2.600 - 3.700 NA 1000 3,3 115 87,4 - 114 NA

XPEHEW-H1-0000-00XXX HEW 80-CRI White 2.600 - 4.000 NA 1000 3,3 115 87,4 - 114 NA

XPEHEW-P1-0000-00XXX HEW 85-CRI White 2.600 - 3.200 NA 1000 3,3 115 73,9 - 93,9 NA

XPEHEW-U1-0000-00XXX HEW 90-CRI White 2.600 - 3.200 NA 1000 3,3 115 73,9 - 87,4 NA


XLamp® XP-E

Data sheet download: www.cree.com/products/pdf/XLampXP-E.pdf

13


XLamp® XP-C LED

LE

Ds

FeaturesnAvailable in white (2,600 K to 10,000 K CCT), royal blue, blue, green, red, amber, red-orangenMaximum drive current: up to 500 mAnLow thermal resistance: as low as 10 °C/WnWide viewing angle: 115° – 125°nUnlimited floor life at ≤ 30° C/85 % RHnReflow solderable - JEDEC J-STD-020C compatiblenElectrically neutral thermal path

ApplicationsnPortablenBacklightingnSignagenRetail display

The XLamp XP-C LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. This smaller package extends Cree’s award-winning LED performance into new LED lighting applications.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

XPCWHT-L1-0000-00XXX XLamp XP-C

Cool White 5.000 - 10.000 NA 500 350 3,4 115 87,4 - 100 NA

Neutral White 3.700 - 5.000 NA 500 350 3,4 115 67,2 - 87,4 NA

Warm White 2.600 - 3.700 NA 500 350 3,4 115 56,8 - 80,6 NA

XPCROY-L1-0000-00XXX

XLamp XP-C

Royal Blue NA 450-465 500 350 3,4 125 250 - 350mW NA

XPCBLU-L1-0000-00XXX Blue NA 465-485 500 350 3,4 125 23,5-39,6 NA

XPCGRN-L1-0000-00XXX Green NA 520-535 500 350 3,5 125 56,8 -73,9 NA

XPCAMB-L1-0000-00XXX Amber NA 585-595 350 350 2,2 125 39,8 - 56,8 NA

XPCRDO-L1-0000-00XXX Red Orange NA 610-620 350 350 2,2 125 51,7 - 67,2 NA

XPCRED-L1-0000-00XXX Red NA 620-630 350 350 2,2 125 39,8 - 56,8 NA

XLamp® XP-C

Data sheet download: www.cree.com/products/pdf/XLampXP-C.pdf

Raising the Bar for Efficacy at High Current

XLamp® XP-G LED

14

LE

Ds


The XLamp XP-G LED is capable of up to 493 lumens at 92 lumens per watt when driven at 1.5 A. XLamp XP-G LEDs set the new standard for light output and efficacy in single-die LEDs, extending the leadership of Cree’s lighting-class XLamp XP family and giving lighting designers a wide range of price and perfor-mance options that all share a common footprint.

Featuresn Available in white and outdoor whiten ANSI-compatible chromaticity binsn Maximum drive current: 1500 mAn Low thermal resistance: 6 °C/Wn Wide viewing angle: 125 °n Unlimited floor life at ≤ 30° C/85 % RHn Reflow solderable - JEDEC J-STD-020Cn Electrically neutral thermal path

Applicationsn LED replacement lampsn Outdoorn Commercialn Residentialn Portablen Off-grid (solar-powered)


Part Number Package Type Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

XPGWHT-L1-0000-00XXX

XLamp XP-G

Cool White 5.000 - 8.300 NA 1500 350 3,0 125° 122 - 139 NA

Neutral White 3.700 - 5.000 NA 1500 350 3,0 125° 100 - 122 NA

Warm White 2.600 - 3.700 NA 1500 350 3,0 125° 87,4 - 114 NA

XPGWHT-01-0000-00XXX Outdoor White 3.500 - 5.300 NA 1500 350 3,0 125° 107 - 130 NA

XPGWHT-H1-0000-00XXX 80-CRI White 2.600 - 4.000 NA 1500 350 3,3 125° 87,4 - 114 NA

XPGWHT-P1-0000-00XXX 85-CRI White 2.600 - 3.200 NA 1500 350 3,3 125° 67,2 - 87,4 NA

XPGWHT-U1-0000-00XXX 90-CRI White 2.600 - 3.200 NA 1500 350 3,3 125° 67,2 - 87,4 NA

XLamp® XP-G

Data sheet download: www.cree.com/products/pdf/XLampXP-G.pdf

15


XLamp® XM-L LED

LE

Ds

Featuresn Delivers 1000 lumens at 100 lumens per Wattn Low thermal resistance: 2.5°C/Wn ANSI-compatible chromaticity binsn Unlimited floor life at ≤ 30ºC/85% RHn Reflow solderable - JEDEC J-STD-020Cn Electrically neutral thermal path

ApplicationsnStreet and roadwaynOutdoor areanSignagenHigh-bay and industrial

The XLamp XM-L is the industry’s brightest, highest performance lighting-class LED. With breakthrough light output and efficacy, XM-L is designed for very high-lumen ap-plications such as high-bay or roadway lighting.

XLamp XM-L LEDs offer the unique combination of very high efficacy at very high drive currents, providing a 20 % efficiency gain over the XLamp XP-G LED at the same current. With this available efficacy, XM-L can lower total system cost by reducing the number of LEDs and optics in the system.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

XMLAWT-00-0000-0000XXXXX XLamp X-ML

Cool White 5.000 - 8.300 NA 3000 700 3,35 125 260 -280 NA

Neutral White 3.700 - 5.000 NA 3000 700 3,35 125 200 -280 NA

Warm White 2.700 - 3.700 NA 3000 700 3,35 125 182 -240 NA

80-CRI White 2.700 - 4.300 NA 3000 700 3,35 125 182 -240 NA

XMLHvW-Q0-0000-0000XXXXXXlamp

XM-L High Voltage Version

Cool White 5.000 - 8.300 NA 125 44 46 115 200 - 240 NA

Neutral White 3.700 - 5.000 NA 125 44 46 115 164 - 220 NA

Warm White 2.700 - 3.700 NA 125 44 46 115 148 - 182 NA

80-CRI White 2.700 - 5.000 NA 125 44 46 115 148 - 182 NA

XLamp® XM-L

Data sheet download: www.cree.com/products/pdf/XLampXM-L.pdf

16 17

XLamp® XM-L EasyWhite LED

LE

Ds

The XLamp XM-L EasyWhite LED eliminates chromaticity binning, and enables lumi-naire and bulb manufacturers to deliver the consistent colour and high efficacy light output of a multi-die LED in the compact XM-L footprint. XLamp XM-L EasyWhite LEDs can reduce LED-to-LED colour variation to within a 2-step MacAdam ellipse, 94% smaller than the total area of the corresponding ANSI C78.377 colour region.

The XLamp XM-L EasyWhite LED is the perfect choice for lighting applications where moderate to high luminous flux output is required from a single, small point source. Example applications include: LED retrofit bulbs, commercial/retail display spotlights, and other indoor general illumination applications.

XLamp® XM-LEasyWhite LED

FeaturesnAvailable in 4-step and 2-step EasyWhite bins at 2.700 K, 3.000 K, 3.500 K, 4.000 K CCT.nWide range of operating current - up to 2 A @ 6 Vn85° C binning and characterizationnWide variety of CRI choices: standard CRI as well as 80, 85, 90 min. CRInElectrically neutral thermal path

Applicationsn 20-25 W halogen MR, PAR and B10-style replacement lampsn Small form factor directional lightingn Track lightingn Accent lighting



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

XMLEZW-00-0000-0BXXXXXX XLamp XM-L

Easy White Standard CRI 2.700 - 4.000 NA 2000 700 5,8 115 240 - 340 NA

Easy White, 80-CRI min. 2.700 - 4.000 NA 2000 700 5,8 115 240 - 340 NA



XMLEZW-00-0000-0DXXXXXX XLamp XM-L

Easy White Standard CRI 2.700 - 4.000 NA 1000 350 11,6 115 240 - 340 NA




Cree EasyWhiteTM Technology Colour Temperatures – XLamp® MC-E and XLamp® MP-L

EasyWhite „F“ (4-Step) Chromaticity Regions EasyWhite „H“ (2-Step) Chromaticity Regions

Data sheet download: www.cree.com/products/pdf/XLampXM-L_EZW.pdf

16 17

Raising the Bar for Efficacy at High Current

XLamp® ML-B LED

LE

Ds

The Cree XLamp ML-B LED brings lighting-class performance to 1/4-watt LEDs and continues Cree’s history of leading-edge innovation in LEDs for lighting ap-plications. The XLamp ML-B LED brings high performance and a smooth look to a wide range of lighting applications, including linear lighting, under cabinet illumination and fluorescent retrofits.

Featuresn Efficacy of over 116 lm/W (cool white)n Available in ANSI-binned white (2,600 K to 8,300 K)n Wide viewing angle: 120°n 3.5-mm x 3.5-mm package with 25°C/W and electrically neutral thermal pathn RoHS-compliant • Unlimited floor life at ≤ 30°C/85% RH

Applicationsn T5/T8 bulbs; fluorescent replacementn Under-cabinet lightingn Retail and refrigerated displayn Panel lights



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MLBWT-A1-0000-000XXX

XLamp ML-B

Cool White 4.500 - 8.300 NA 175 80 3,3 120° 23,5 NA

Warm White 2.200 - 4.300 NA 175 80 3,3 120° 13,9 - 23,5 NA

MLBAWT-H1-0000-000XXX 80-CRI White 2.600 - 4.000 NA 175 80 3,3 120° 18,1 - 23,5 NA

MLBAWT-P1-0000-000XXX 85-CRI White 2.600 - 4.000 NA 175 80 3,3 120° 13,9 - 18,1 NA

MLBAWT-U1-0000-000XXX 90-CRI White 2.600 - 4.000 NA 175 80 3,3 120° 13,9 - 18,1 NA

XLamp® ML-B

Data sheet download: www.cree.com/products/pdf/XLampML-B.pdf


18 19

versatile, Mid-Power, Lighting-Class LED

XLamp® ML-C LED

LE

Ds

The Cree XLamp ML-C LED brings lighting-class performance to 1/3-watt LEDs and continues Cree’s history of leading-edge innovation in LEDs for lighting applications. The XLamp ML-C LED brings high performance and a smooth look to a wide range of lighting applications, including linear lighting, LED replace-ment lamps, fluorescent retrofits and retail-display lighting. The ML-C LED is available in parallel and series as well minimum 80, 85 and 90-CRI options for a wide range of color temperatures. With a typical forward voltage of 6.4 V at 50 mA, ML-C series LEDs provide a high-voltage option that can enable a driver that is cheaper, more efficient and smaller in size to lower system cost. The minimum-80, 85 and 90 CRI ML-C LEDs enable customers to address applications, such as retail and restaurant lighting, where high CRI is required.

XLamp® ML-C

Data sheet download: www.cree.com/products/pdf/XLampML-C.pdf

Featuresn Efficacy of over 114 lm/W (cool white)n Available in ANSI-binned white (2,800 K to 8,300 K)n Wide viewing angle: 120°n 3.5 mm x 3.5 mm packagen High voltage and minimum 80-CRI options

Applicationsn T5/T8 bulbs; fluorescent replacementn Under-cabinet lightingn Retail and refrigerated displayn Panel lightsn Troffer fixture replacementsn A19 LED replacement bulbs


Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MLCAWT-A1-0000-000XXX

Xlamp ML-C

Cool White 4.500 - 8.300 NA 350 100 3,2 120 26,8 - 35,2 NA

Warm White 2.600 - 4.300 NA 350 100 3,2 120 18,1 - 30,6 NA

MLCAWT-H1-0000-000XXX 80-CRI White 2.800 - 6.500 NA 350 100 3,2 120 18,1 - 30,6 NA

MLCAWT-P1-0000-000XXX 85-CRI White 2.800 - 4.300 NA 350 100 3,2 120 18,1 - 26,8 NA

MLCAWT-U1-0000-000XXX 90-CRI White 2.800 - 4.300 NA 350 100 3,2 120 18,1 - 23,5 NA

MLCSWT-A1-0000-000XXX

Xlamp ML-CS

Cool White 4.500 - 8.300 NA 175 50 6,4 120 26,8 - 35,2 NA

Warm White 2.800 - 4.300 NA 175 50 6,4 120 26,8 - 35,2 NA

MLCSWT-H1-0000-000XXX 80-CRI White 2.800 - 6.500 NA 175 50 6,4 120 23,5 - 30,6 NA

MLCSWT-P1-0000-000XXX 85-CRI White 2.700 - 4.000 NA 175 50 6,4 120 18,1 - 26,8 NA

MLCSWT-U1-0000-000XXX 90-CRI White 2.700 - 4.000 NA 175 50 6,4 120 18,1 - 23,5 NA



18 19

Lighting-Class Performance for Linear Applications

XLamp® ML-E LED / ML-ES LED

LE

Ds

Featuresn Efficacy of over 116 lm/W (cool white)n Available in ANSI-binned white (2,600 K to 8,300 K)n Wide viewing angle: 120°n 3.5 mm x 3.5 mm package with 11 °C/W and electrically neutral thermal pathn RoHS-compliantn Unlimited floor life at ≤ 30°C /85 % RH

Applicationsn T5/T8 bulbs; fluorescent replacementn Under-cabinet lightingn Retail and refrigerated displayn Panel lights

The Cree XLamp ML-E LED brings lighting-class performance to 1/2-watt LEDs and continues Cree’s history of leading-edge innovation in LEDs for lighting ap-plications. The XLamp ML-E LED brings high performance and a smooth look to a wide range of lighting applications, including linear lighting, LED light bulbs, fluorescent retrofits and retail-display lighting.

XLamp® ML-E

Data sheet download: www.cree.com/products/pdf/XLampML-E.pdf


Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MLEAWT-A1-0000-000XXX

XLamp ML-E

Cool White 4.300 - 8.300 NA 500 150 3,2 120 39,8 - 56,8 NA

Warm White 2.600 - 4.300 NA 500 150 3,2 120 35,2 - 51,7 NA

MLEAWT-H1-0000-000XXX 80-CRI White 2.600 - 5.350 NA 500 150 3,2 120 30,6 - 51,7 NA

MLEAWT-P1-0000-000XXX 85-CRI White 2.600 - 4.000 NA 500 150 3,2 120 30,6 - 45,7 NA

MLEAWT-U1-0000-000XXX 90-CRI White 2.600 - 4.000 NA 500 150 3,2 120 30,6 - 39,8 NA

MLERED-A1-0000-000XXX Red NA 620 - 630 350 150 2,2 120 18,1 - 23,5 NA

MLEGRN-A1-0000-000XXX Green NA 520 - 535 350 150 3,45 125 26,8 - 35,2 NA

MLEBLU-A1-0000-000XXX Blue NA 465 - 485 350 150 3,2 125 10,7 - 13,9 NA

MLESWT-A1-0000-000XXX

XLamp ML-ES

Cool White 4.500 - 8.300 NA 167 50 9,6 120 39,8 - 56,8 NA

Warm White 2.600 - 4.300 NA 167 50 9,6 120 30,6 - 51,7 NA

MLESWT-H1-0000-000XXX 80-CRI White 2.600 - 5.000 NA 167 50 9,6 120 30,6 - 51,7 NA

MLESWT-P1-0000-000XXX 85-CRI White 2.600 - 4.000 NA 167 50 9,6 120 30,6 - 45,7 NA

MLESWT-U1-0000-000XXX 90-CRI White 2.600 - 4.000 NA 167 50 9,6 120 30,6 - 39,8 NA


20 21

Lighting-Class Performance for Every Applications

XLamp® MX-3 LED

LE

Ds

FeaturesnAvailable in white (2,600 K to 8,300 K CCT)nMaximum drive current: 400 mAnWide viewing angle: 120°nElectrically neutral thermal pathnQualification at max drive currentnRoHS-compliantnUnlimited floor life at ≤ 30° C/85 % RH

Applicationsn LED light bulbsn Cove lighting and wall washingn Under-cabinet lightingn Retail and refrigerated displayn Fluorescent replacement

XLamp MX-3 LEDs delivers enhanced light uniformity and LED-to-LED colour consistency while extending Cree’s lighting-class performance to a broader set of applications. With the industry’s tightest colour consistency and uniform angu-lar chromaticity, Cree continues to set standards for LED longevity and consist-ency.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MX3AWT-A1-0000-00XXX XLamp MX-3Cool White 4.300 - 8.300 NA 400 300 3,7 120 87,4 - 114,0 NA

Warm White 2.600 - 4.300 NA 400 300 3,7 120 73,9 - 100 NA

XLamp® MX-3

Data sheet download: www.cree.com/products/pdf/XLampMX-3.pdf


20 21

Lighting-Class Performance for Linear Applications

XLamp® MX-3S LED

LE

Ds

Featuresn Available in white (2,600 K to 8,300 K CCT)nMaximum drive current: 175 mAnWide viewing angle: 120°nElectrically neutral thermal pathnQualification at max drive currentnRoHS-compliantnUnlimited floor life at ≤ 30° C/85 % RH

Applicationsn LED light bulbsn Cove lighting and wall washingn Under-cabinet lightingn Retail and refrigerated displayn Fluorescent replacement

The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family of LEDs have wide viewing angle, uniform light output without secondary optics, unlimited floor life, and electrically neutral thermal path. The XLamp MX-3S LED brings high performance and quality of light to a range of lighting applications that require near-line-voltage configuration, including LED light bulbs, fluorescent retrofits and retail-display lighting.

XLamp® MX-3S



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MX3SWT-A1-0000-00XXX XLamp MX-3SCool White 4.300 - 8.300 NA 150 115 10,7 120 87,4 - 114 NA

Warm White 2.600 - 4.300 NA 150 115 10,7 120 67,2 - 100 NA

Data sheet download: www.cree.com/products/pdf/XLampMX-3S.pdf

22 23

The New Standard for Indoor Lighting

XLamp® MX-6 LED

LE

Ds

Featuresn Maximum drive current: 1000 mAn ANSI-compatible chromaticity binsn RoHS and REACH-compliantn Unlimited floor life at <= 30 degrees C/85 % RHn Electrically-isolated thermal path

Applicationsn Indoor commercialn Kitchen under-cabinetn Refrigerated displayn Fluorescent replacementn LED light bulbs

The XLamp MX-6 LED set the lighting-class standard for indoor LED lighting de-signs, with better colour consistency and higher reliability than incumbent solu-tions. XLamp MX-6 LEDs deliver high lumen output with low forward voltage so there is no compromise between light output and efficacy.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MX6AWT-A1-0000-00XXXXLamp MX-6

Cool White 4.300 - 8.300 NA 350 300 3,3 120 87,4 - 114 NA

Warm White 2.600 - 4.300 NA 350 300 3,3 120 67,2 - 100 NA

MX6AWT-H1-0000-00XXX 80-CRI White 2.600 - 4.300 NA 350 300 3,3 120 62 - 93,9 NA

XLamp® MX-6

Data sheet download: www.cree.com/products/pdf/XLampMX-6.pdf


22 23

The New Standard for Indoor Lighting

XLamp® MX-6S LED

LE

Ds

Featuresn Maximum drive current: 175 mAn ANSI-compatible chromaticity binsn RoHS and REACH-compliantn Unlimited floor life at <= 30 degrees C/85 % RHn Electrically-isolated thermal path

Applicationsn Indoor commercialn Kitchen under-cabinetn Refrigerated displayn Fluorescent replacementn LED light bulbs

The Cree XLamp MX-6S LED provides the proven lighting-class performance andreliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All mem-bers of the MX-family of LEDs have wide viewing angle, uniform light output without secondary optics, unlimited floor life, and electrically neutral thermal path. The XLamp MX-6S LED brings high performance and quality of light to a range of lighting applications that require near-line-voltage configuration, in-cluding LED light bulbs, fluorescent retrofits and retail-display lighting.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MX6SWT-A1-0000-00XXXXLamp MX-6S

Cool White 4.300 - 8.300 NA 175 60 22,0 120 100 - 130 NA

Warm White 2.600 - 4.300 NA 175 60 22,0 120 80,6 - 114 NA

MX6SWT-A1-0000-00XXX 80-CRI White 2.600 - 4.300 NA 175 60 22,0 120 73,9 - 107 NA

Data sheet download: www.cree.com/products/pdf/XLampMX-6S.pdf

XLamp® MX-6S

24 25

LE

Ds

High-Lumen Output in a Small Form Factor Now available in Dynamic White option!

24

XLamp® MC-E LED

FeaturesnAvailable in white, EasyWhite®, Dynamic White, or colour (RGBW)nIndividually addressable LEDsnLow thermal resistancenElectrically-isolated thermal pathnROHS and REACH-complant

The XLamp MC-E LED is a lighting-class, multi-chip LED thet provides high lumen output, colour consistency and multi-colour packaging flexibility in a small footprint packaga. The XLamp MC-E LED is available with EasyWhite™ 2-step and 4-step bins, wich improve LED-to-LED colour consistency and reduce manufacturing complexity. Compared to discrete LEDs, XLamp MC-E LEDs re-duce the distance between LED die, creating a small optical source for excellent optical control and efficient colour mixing.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MCE4WT-A2-0000-000XXX

XLamp MC-E

Cool White 5.000 - 10.000 NA 700 / die 350 / die 3,2 110° 370 - 430 NA

MCE4WT-A2-0000-000XXX Neutral White 3.700 - 5.000 NA 700 / die 350 / die 3,2 110° 280 - 370 NA

MCE4WT-A2-0000-000XXX Warm White 2.600 - 3.700 NA 700 / die 350 / die 3,2 110° 240 - 370 NA

MCEEZW-A1-0000-0000XXXX Easy White 2.700 - 4.000 NA 700 / die 350 / die 3,2 110° 280 - 370 NA

MCEEZW-H1-0000-0000XXXXX EZW 80-CRI White 2.700 - 4.000 NA 700 / die 350 / die 3,2 110° 280 - 320 NA

MCEEZW-P1-0000-0000XXXXX EZW 85-CRI White 2.700 - 3.000 NA 700 / die 350 / die 3,2 110° 240 - 280 NA

MCE4CT-A2-0000-00AXXXXXX

XLamp MC-EMultiColour

Red NA 620 - 630 700 / die 350 / die 2,1 115° 30,6 NA

Green NA 520 - 535 700 / die 350 / die 3,4 115° 67,2 NA

Blue NA 450 - 465 700 / die 350 / die 3,2 115° 8,2 NA

Cool White 5.700 - 7.000 NA 700 / die 350 / die 3,2 115° 100 NA

MCE4CT-A2-0000-00AXXXXXX

Red NA 620 - 630 700 / die 350 / die 2,1 115° 30,6 NA

Green NA 520 - 535 700 / die 350 / die 3,4 115° 67,2 NA

Blue NA 450 - 465 700 / die 350 / die 3,2 115° 8,2 NA

Neutral White 3.700 - 4.300 NA 700 / die 350 / die 3,2 115° 80 NA

MCEDWT-A1-0000-0000AXXXXXLamp MC-E Dynamic

Cool White 6.500 NA 700 / die 350 / die 3,2 110° 100 NA

Warm White 2.700 NA 700 / die 350 / die 3,2 110° 70 NA

MCEDWT-A1-0000-0000AXXXXCool White 6.000 NA 700 / die 350 / die 3,2 110° 100 NA

Warm White 2.700 NA 700 / die 350 / die 3,2 110° 70 NA

XLamp® MC-E White

Data sheet download: www.cree.com/products/pdf/XLampMC-E.pdf

XLamp® MC-E Colour XLamp® MC-E Dynamic White

24 25

Unprecedented Performance, Colour Consistency and Lumen Density

XLamp® MP-L EasyWhite™ LED

LE

Ds


FeaturesnCree EasyWhite™ colour temperaturesnHigh lumen densitynWide viewing angle: 125 °nMinimum 80 CRI at 2700 K and 3000 K CCTnElectrically neutral thermal path

ApplicationsnCommercial/residential directional lightingnLED retrofit bulbsnGeneral indoor/outdoor illumination

Download Cree‘ s pendant design application note: www.cree.com/pendants

The XLamp MP-L EasyWhite LED offers the performance, colour consistency and lumen density to displace conventional light sources, in a breakthrough 12 x 13 mm package design. Combining Cree EasyWhite technology with up to 1500 lumens of light at 250 mA, the MP-L EasyWhite LED simplifies system design and increases colour consistency enabling new applications previously achievable only through the use of multiple LED components. The MP-L EasyWhite LED is the perfect choice for lighting applications where high luminous-flux output is required from a single, small point source. Examples of specific applications include: commercial/retail display spotlights, LED retrofit bulbs, and other indoor and outdoor general-illumination applications.

The MP-L EasyWhite further broadens Cree’s portfolio of application-optimized LEDs, specifically designed to meet the needs of the lighting industry.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MPLEZW-A1-0000-0000XXXXX Xlamp MPL

Easy White 2.700 - 4.000 NA 250 150 25 125 700-1000 NA

XLamp® MP-L

XLamp® MP-L LEDs up to 1500lm @ 20w XLamp® MP-L LEDs up to 855lm @ 10w

Available EasyWhiteTM Colour Temperatures

2700K (82 CRI) 2700K (82 CRI)

3000K (82 CRI) 3000K (82 CRI)

3500K (80 CRI) 3500K (80 CRI)

4000K (80 CRI)

Data sheet download: www.cree.com/products/pdf/XLampMP-L.pdf

Cree EasyWhiteTM Technology Colour Temperatures – XLamp® MC-E and XLamp® MP-L

EasyWhite „F“ (4-Step) Chromaticity Regions EasyWhite „H“ (2-Step) Chromaticity Regions

26 27

Cree’s Lighting-Class Power LEDs

XLamp® XR-E LEDs

LE

Ds

FeaturesnGuaranteed minimum flux order codes up to 107 lm in white, 30.6 lm in blue and 67.2 lm in green at 350 mAnAvailable in white (2,600 K to 10,000 K CCT), blue, royal blue and greennMaximum drive current: up to 1000 mAnIndustry’s lowest thermal resistance: 8 °C/W

nMax junction temperature: 150 °CnIndustry-leading JEDEC standard prequalification testingnReflow solderable – JEDEC J-STD-020C compatiblenElectrically neutral thermal pathnLumen maintenance of greater than 70 % after 50,000 hours

The XLamp XR-E LED is leading the LED lighting revolution with its unprec-edented lighting-class brightness, efficacy, lifetime and quality of light. These lighting-class features enable the XLamp XR-E LED to replace many traditional light sources and save money with energy-efficient light and long lifetimes.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

XREWHT-L1-0000-00XXX XLamp XR-E

Cool White 5.000 - 10.000 NA 1000 350 3,3 90° 80,6 - 107 NA

Neutral White 3.700 - 5.000 NA 700 350 3,3 90° 62 - 93,9 NA

Warm White 2.600 - 3.700 NA 700 350 3,3 90° 56,8 - 87,4 NA

XREROY-L1-0000-00XXX

XLamp XR-E

Royal Blue NA 450 – 465 1000 350 3,3 100° 300 - 425mW NA

XREBLU-L1-0000-00XXX Blue NA 465 – 485 1000 350 3,3 100° 23,5 - 30,6 NA

XREGRN-L1-0000-00XXX Green NA 520 – 535 700 350 3,3 100° 67,2 NA

XLamp® XR-E

Data sheet download: www.cree.com/products/pdf/XLamp7090XR-E.pdf

26 27

Cree High-Power LEDs

XLamp® XR-C LEDs

LE

Ds

FeaturesnAvailable in white (2,600 K to 10,000 K CCT), royal blue, blue, green, amber, red-orange, rednMaximum drive current: up to 700 mAnLow thermal resistance: as low as 12 °C/WnMax junction temperature: 150 °C

nIndustry-leading JEDEC standard prequalification testingnReflow solderable – JEDEC J-STD-020CncompatiblenElectrically neutral thermal pathnLumen maintenance of greater than 70 % after 50,000 hours

The XLamp XR-C LED gives lighting designers the flexibility and performance to create the next generation of LED lighting products. XLamp XR-C LEDs feature electrically neutral thermal path, low thermal resistance and support for a wide range of drive currents.



Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

XRCWHT-L1-0000-00XXX XLamp XR-C

Cool White 5.000 - 10.000 NA 500 350 3,5 90° 56,8 - 87,4 NA

Neutral White 3.700 - 5.000 NA 500 350 3,5 90° 51,7 - 80,6 NA

Warm White 2.600 - 3.700 NA 500 350 3,5 90° 39,8 - 73,9 NA

XRCROY-L1-0000-00XXX

XLamp XR-C

Royal Blue NA 450 - 465 500 350 3,5 100° 250 - 300mW NA

XRCBLU-L1-0000-00XXX Blue NA 465 - 475 500 350 3,5 100° 13,9 - 18,1 NA

XRCGRN-L1-0000-00XXX Green NA 520 - 535 500 350 3,7 100° 39,8 - 51,7 NA

XRCAMB-L1-0000-00XXX Amber NA 585 - 595 700 350 2,2 90° 23,5 - 39,8 NA

XRCRDO-L1-0000-00XXX Red Orange NA 610 - 620 700 350 2,2 90° 30,6 - 39,8 NA

XRCRED-L1-0000-00XXX Red NA 620 - 630 700 350 2,2 90° 23,5 - 39,8 NA


XLamp® XR-C

Data sheet download: www.cree.com/products/pdf/XLampXR-C.pdf

28

XLamp® MT-G EasyWhite™ LED

LE

Ds

FeaturesnEasyWhite 2- and 4-step colour temperaturesnHigh lumen densitynMinimum 80 CRI (2700 K, 3000 K)nElectrically isolated thermal pathnWide viewing angle (120°)

ApplicationsnMR-style retrofit lampsnAccent & tracknRetail displaynDown lightsnHospitalitynMuseums & art galleries

The XLamp MT-G EasyWhite LED is optimized for high-output, small-form-factor, directional-lighting applications, such as LED-based MR retrofit bulbs, accent, track and down lighting. XLamp MT-G LEDs enable designs with consistent colour, small form factor and unprecedented performance. While achieving high lumen output from a space-constrained and thermally-constrained form factor has been challenging in the past, MT-G enables 35–50-watt halogen MR16 retrofit lamps. In addition, the MT-G LED can be driven to much higher currents in less con-strained designs, achieving up to 1525 lumens at 4 A at 85°C in warm-white (3000-K) colour temperatures. XLamp MT-G LEDs are the industry’s first LEDs to be binned for luminous flux and chromaticity at 85°C, which can simplify luminaire design calculations and speed time-to-market.



Colour Colour Temp. (°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

MTGEZW-00-0000-0B0XXXXXXXLamp

MT-G 6V Version

EasyWhite Standard CRI 2.700 - 5.000 NA 4000 1100 6 120 440 - 560 NA

EasyWhite 85 CRI min. 2.700 - 3.000 NA 4000 110 6 120 400 - 480 NA


MTGEZW-00-0000-0N0XXXXXXXLamp

MT-G 36V Version

EasyWhite Standard CRI 2.700 - 5.000 NA 700 185 36 120 440 - 560 NA



XLamp® MT-G

Data sheet download: www.cree.com/products/pdf/XLampMTG-EZW.pdf

“Good Enough” is not good enough for Cree!

The Cree XLamp MT-G LED is a first-of-its-kind lighting class LED designed specifically for directional and accent illumination. This revolutionary product heralds the dawn of a new era in high flux MR16 lamp design. The innovative Cree XLamp MT-G LED allows lamp designers to move beyond traditional technology and bring beautiful, long-lasting energy-efficient LED lightton an MR16 lamp. You no longer have to settle for ”good enough”.MR16 assembly: Carclo TIR optic

MR16 assembly: Ledil reflector optic

29

XLamp® CXA2011 LED

Data sheet download: http://www.cree.com/products/pdf/XLampCXA2011.pdf

Don´t forget, also Characterized and binned at 85°C!

LE

Ds

XLamp® CXA2011 LED

With the XLamp CXA2011, Cree sets the lighting-class benchmark for easy-to-use LED arrays optimized for non-directional, high lumen output applications.

The first screw-down LED array to be characterized at 85°C, the XLamp CXA2011 LED delivers high lumen output in a single, easy-to-use package. The CXA2011 LED can address applications with a wide range of power (11 - 45 W), light output and efficacies. From 800 lumen, 60 W A19 replacement bulbs to 2000+ lumen down-lights and commercial wall packs, the CXA2011 LED can simplify design and speed time to market.

Easy to assemble and requiring no reflow soldering, CXA2011 LEDs deliver almost 4000 lumens at an operating temperature of 85°C in cool white (5000 K) in a single component. The CXA2011 LED is available in three binning options including the EasyWhite 2-step colour bins, which offers the industry’s tightest LED-to-LED col-our consistency, replicating the uniformity of incandescent light bulbs.

FeaturesnThree binning options: ANSI-compatible sub-bins, EasyWhite 4-step, EasyWhite 2-stepnHigh lumen density in a single, easy-to-use packagenCharacterized and binned at 85°CnWide viewing angle (120°)nScrew-down attachment


Colour Colour Temp.

(°K)

Dominant Wavelength

(mm)

Max. Current

(mA)

Tested Current

(mA)

Forward voltage

(v)

viewing Angle (deg)

Luminous Flux (lm)

Luminous Intensity

(mcd)

CXA2011-0000-000P000XXXX XLamp CXA2011

Easy White Standard CRI 2.700 - 5.000 NA 1000 NA 40 120 680 - 1040 NA

ANSI White 2.700 - 5.000 NA 1000 NA 40 120 680 - 1040 NAEZW 90-CRI

White 2.700 - 3.000 NA 1000 NA 40 120 680 - 780 NA

ANSI 90-CRI White 2.700 - 3.000 NA 1000 NA 40 120 680 - 780 NA

ApplicationsHigh lumen, non-directional applications with a wide range of power and light output including:

nSurface-mount downlightsnRecessed can lightsnPendant lightsnA19 replacement bulbsnExterior area lightsnCommercial wall pack


30 31

High Quality Secondary Optics that meet Your Needs

SE

CO

ND

AR

Y O

PT

ICS

Carclo LED Optics, part of Carclo Technical Plastics, is a global leader in the field of technical injection moulding and specialises in high quality secondary optics that are used in the efficient management of light emitted by LEDs.

Since 1936, Carclo and its predecessor companies have been at the forefront of optical technology. Today Carclo boasts unrivalled expertise in optical design and manufacture.

They have their own optical design department with full optical and mechanical CAD facilities, in addition to also having specialist tooling and optical polishing capabilities.Carclo are a highly technical company comprising aeronautical, chemical, electrical, mechanical, materials, and plastics engineering disciplines operating out of twelve locations across the United Kingdom, United States, Czech Republic, China, and India. The synergy of Carclo provides the customer base with an extensive list of technical capabilities and global facilities to meet the increasing logistic and cost requirements of tomorrow.

Carclo Technical Plastics has developed a new modular optical system that, meets the full European ME3a Class Street Lighting specification This new, flex-ible, modular concept uses a combination of optic and reflector to meet the chal-lenges of providing a versatile solution for a variety of road geometries and light output characteristics. A high performance optic is employed to control the light distribution along the road while a state-of-the-art reflector controls the light distribution across the road.

For information please contact: [email protected] · Tel. +49 6233 347-120 or visit www.carclo-optics.com to see Carclo’s street lighting solutions.

30 31

Focused on the Future of Lighting

SE

CO

ND

AR

Y O

PT

ICS

The extensive applications of this product include:nIndoor and outdoor lightingnColour mixingnStage lightingnAviationnAlso being great for high peak intendsy beams

Carclo Technical Plastics releasesa new range of 30 mm TIR optics for use with a range of large dome, multi-chip LED’s. The 30mm optic works well with single-chip LED packages providing high peak intensities or narrow beam divergences compared to smaller diameter optics. The optic is now available in a wide range of beam angles: narrow, fine-frosted, medium-frosted, wide-frosted and elliptical. The dynamic design behind this particular innovative prod-uct, embraces an Advanced Transform lens design com-bined with frosted optic technology to effectively minimise any chip-image or colour-separation effects, along with high optical efficiency.

Carclo has taken its high efficiency 10 mm TIR optical design cross-section and extruded it to produce a revolu-tionary optical component. This optic can be used to collect light from a long strip of LEDs and project at a 30 degree beam in one direction. Designers and Engineers can use this illumination for applications such as under cabinet lighting, wall washing, corridor or other interior or archi-tectural lighting applications. The optic is over 75 % efficient and is designed to give a high light output using compact LEDs such as the Cree XP-E. We offer two standard lengths, part no.10397 which is 1200 mm long and part number 10398, which is 300 mm long. Other custom lengths up to 2 metres are available on request.

Cree XR-C XR-E XP-C XP-E XP-G MC-E MC-RGBW MX-6 MT-G XM-L XM-L

EZW

10 mm Optics X X X

Triple Optic X X X

Quad Optic X X X

20 mm Optics and Holders X X X X X X X X X

26.5 mm Optics and Holders X X X X X X X X X X

30 mm Optics X X X X X X X X

Bubble Optics (Wide area lighting) X X X

Side Emitting Optics X X X

Extruded Strip Optic X X X

60 mm Optics X

Hybrid Optic X X


Carclo Technical Plastic’s highly efficient 30mm Optic

32 33

High Quality LED Optics from Gaggione From a Standard Optic to a Custom-Made Solution to Meet Your Requirements

DR

IvE

RS

& C

ON

TR

OL

LE

RS

SE

CO

ND

AR

Y O

PT

ICS

Featuresn Very homogeneous light distributionnCan be adapted to customer requirementsnAn ultra-compact size to fit perfectly with all your applicationsn Optics for large emitting arean Available in choice of single and multiple lens holders to match your applicationsnOptimize your production process with double sided adhesive option

Example ApplicationsnCollimator for long distance lighting applications (LLC05N)nCollimator compatible with automotive and road signalling standards (LLC0_E)nOptimized mixing of red, green and blue (LLC04N)


Collimators

Part Number Ø Half angle at CREE XP-E CREE XP-G CREE XR-E CREE MC-E

LLCO1N

16 mm

narrow50 % 5.9 8.1 7.1 -

LLCO2N 10 % 11.8 14.6 13.2 -LLCO3N cd/lm* 12.8 8 7.7 -LLCO1M

medium

50 % 14.1 13.8 10.3 -

LLCO2M 10 % 21.8 22.9 19.4 -

LLCO3M cd/lm* 3.5 3.3 4.3 -

LLCO1Wwide

50 % 18.9 17.4 16.5 -LLCO2W 10 % 27.7 28.6 25.5 -LLCO3W cd/lm* 2.1 2.1 2.1 -LLCO1X

eXtra large50 % 13.6 18.6 16.7 -

LLCO2X 10 % 36.9 41.3 39.2 -LLCO3X cd/lm* 1.7 1.2 1.2 -LLCO1S

super large50 % 23.9 21.4 23.3 -

LLCO2S 10 % 41.3 41.3 41.8 -LLCO3S cd/lm* 1.2 1.3 1 -LLCO1E

elliptical50 % 9.1 v 15.8 h 10.4 v 16.0 h 8.7 v 15.4 h -

LLCO2E 10 % 17.4 v 26.3 h 19.3 v 28.2 h 17.9 v 26.8 h -LLCO3E cd/lm* 1.3 3.1 4.3 -

LLCO4N elliptical50 % - - - -10 % - - - -

cd/lm* - - - -

LLCO5N

32 mm

narrow50 % 3.1 4 3.7 -10 % 5.6 6.4 8 -

cd/lm* 57.8 42.1 25.4 -

LLCO5M medium50 % - - - 9.410 % - - - 19.7

cd/lm* - - - 5

LLCO5W wide50 % - - - 11.810 % - - - 22.5

cd/lm* - - - 3.6

LLCO7N

35 mm

narrow50 % - - - -10 % - - - -

cd/lm* - - - -

LLCO8N narrow50 % - - - -10 % - - - -

cd/lm* - - - -* Efficiency in candelas per lumen

32 33

SE

CO

ND

AR

Y O

PT

ICS

Mechanical Characteristics

34 35

SE

CO

ND

AR

Y O

PT

ICS

Higher Effectiveness – More Efficiency – Optics for High Power LEDs

KHATOD is one of the world market leader under the Manufacturers of efficient Lenses and Reflectors for High Power LEDs. Only with the matching optical System your LEDs can reach optimal luminary results. KHATOD is one of the strongest brands for optical solutions in the fast and continuous developing LED Market. LEDs from all well known Manufacturers are closely linked with the name KHATOD. From a really large choice of opto-electrical components you can chose the best Lenses or Reflectors for your High Power LED. KHATOD closely works together with all well known LED Manufacturers in the developing area.

Featuresn Production is 100% in the EUn In House tooling constructionn In House photometric laboratoryn German speaking application consulting

n Only PMMA / PC high class optical Grade n 48h Shipping servicen Eulumdat Data available

www.khatod.com

DR

IvE

RS

& C

ON

TR

OL

LE

RS

Lenses and Reflectors suitable for CREE LEDsSuitable for CREE XP XR XRE MCE MX-6

KCLP1277

Anti-flash Reflector 50 mm reduced direct glare X X X

Heat sink

Matching to the Lenses and Reflectors X X X X X

PL1342

Triple Lens 50 mm, available in10°, 25°, 40° and 60° X X X X X

PL1214

50 mm for 6 Power LEDs, available in10°, 25° and 40°

X

34 35

SE

CO

ND

AR

Y O

PT

ICSPlease note that this overview shows only a small part of the whole Kahtod product range for Cree LEDs.

Suitable for CREE XP XR XRE MCE MX-6

KEPL1133KEPL1241

Colour-Mixing LensRGB/ RGBW

12°, 20°, 25°, 425°, 35°

X X X

KESQ195KESQ1169

Single Lens self-adhesiveon 3-M-Foil10°, 25°, 40°, 60°,elliptical

X X X

PL1172

90 mm 9-foldFresnel-Lensfocusable beam 10° to 60°

X X X X X

KCPL1278

16 x 16 mm High gloss coated Reflector65° x 65°

X X X

KCPL1270

39,8 mm High gloss coated Reflector50° x 70°

X X X

Innovative and patentedLens system for Street- and Tunnel Lighting

Individual light distribu-tion is possible through flexible positioning of lens arrays. X


36 37

High Quality LED Optics from Ledil for Cree LEDs

SE

CO

ND

AR

Y O

PT

ICS

D=9.9 mm PMMA

Xp-E / Xp-GFA11055_LISA2-RS-Pin-XPFA10995_LISA2-M-Pin-XPFA11125_LISA2-O-Pin-XPFA10996_LISA2-W-Pin-XPFA11085_LISA2-RS-clip16-XPFA11075_LISA2-M-clip16-XPFA11121_LISA2-O-clip16-XPFA11076_LISA2-W-clip16-XP

10.7 X 7.0 mm PMMA

Xp-E / Xp-GFA10887_TINA-XP-RSFA10644_TINA-XP-DFA11200_TINA-XP-OFA10645_TINA-XP-MFA10838_TINA-XP-WmX-6FA10888_TINA-MX6-RSFA10646_TINA-MX6-DFA11201_TINA-MX6-OFA10647_TINA-MX6-MFA10839_TINA-MX6-WFA10901_TINA-MX6-WW

D=22.2 mm METALLIZED PC

mc-ECA10716_BOOM-MC-SCA10928_BOOM-MC-MCA10929_BOOM-MC-W

D=26 mm PMMA

Xr-ECA10250_ROCKET-MCA10324_ROCKET-SSCA10325_ROCKET-OCA10406_ROCKET-W

Xp-E/Xp-GCA11387_EMILY-SS-XPCA11388_EMILY-M-XPCA11389_EMILY-O-XPCA11390_EMILY-O-90-XP

D=21,6 mm PMMA

mX-6FA10734_TWIDDLE-MX6-DFA10736_TWIDDLE-MX6-MXr-EFA10737_TWIDDLE-XR-DFA10739_TWIDDLE-XR-M

D=21,6 mm PMMA

Xp-E / Xp-GCA11264_HEIDI-D-XPCA11265_HEIDI-M-XPCA11266_HEIDI-O-XPCA11267_HEIDI-O-90-XP

D=30 mm PMMA

mc-ECA10961_RGBX-MC-SSCA10944_RGBX-MC-MCA10945_RGBX-MC-O

29.0 mm X 24.5 mm X 14.5 mm PMMA

Xp-E / Xp-GC10946_FLARE-B-XPCA10932_FLARE-B-XP-TAPEXr-EC10402_FLARE-CCA10563_FLARE-C-TAPEC10527_FLARE-C-DIFF

D=35 mm (SINGLE LENS) PMMA

mc-EC10684_EVA-MC-DC10685_EVA-MC-MC10686_EVA-MC-WC10909_EVA-MC-WW

35 mm (3UP) PMMA

Xr-EC10428_CUTE-3-SSC10427_CUTE-3-MC10429_CUTE-3-W

35 mm (3UP) PMMA

Xp-E / Xp-GC10754_CUTE-3-SS-XPC10755_CUTE-3-M-XPC10756_CUTE-3-W-XP

35 mm (4UP) PMMA

Xp-E / Xp-GC10921_GT4-XP-SC10922_GT4-XP-MC10923_GT4-XP-WC10975_GT4-XP-WW

35 mm (4UP) PMMA

Xr-EC10446_CUTE-4-SSC10447_CUTE-4-MmX-6C10812_CUTE-4-MX6-MC10813_CUTE-4-MX6-W

35 mm (5UP) PMMA

mX-6C10472_MX6-5-M-LOWC10814_MX6-5-W-LOWXp-E / Xp-GF10390_PENTA-5-M-XPC10472_XP-5-M-LOW

38 mm (7UP) PMMA

083 / 183mX-6C10373_MX6-7-MC10633_MX6-7-MDC10585_MX6-7-WC10586_MX6-7-WW


36 37

SE

CO

ND

AR

Y O

PT

ICS

38 mm (SINGLE LENS) PMMA

mc-ECA10861_IRISCA10953_IRIS-MCA11470_IRIS-O

Xp-E/Xp-GCA11358_IRIS-XP-E-screwCA11362_IRIS-XP-E-tape

50 mm (3UP) PMMA

Xr-EC10366_ROCKET-3-SSC10367_ROCKET-3-MC10365_ROCKET-3-W

Xp-E / Xp-GC11192_TUIJA-3-SS-XPC11193_TUIJA-3-M-XPC11191_TUIJA-3-W-XP

50 mm (3UP) PMMA

mX-6C10364_MX6-3-WC10436_MX6-3-M 50 mm (6UP)PMMA

mX-6C10535_MX6-6-S

19 mm METALLIZED PC

Xp-E/Xp-GC11347_REGINA-XP

21.6 mmX 21.6 mm PMMA

mX-6FA10336_MX6-RSFA10337_MX6-SSFA10338_MX6-DFA10339_MX6-MFA10340_MX6-OFA10903_MX6-W-V6

21.6 mm X 21.6 mm PMMA

Xp-E / Xp-GFA10668_CXP-RSFA10667_CXP-SSFA10666_CXP-DFA10665_CXP-MFA10669_CXP-OFA10708_CXP-W4FA11153_CXP-O-90Xr-EFA10303_CRS-RSFA10328_CRS-SSFA10304_CRS-DFA10305_CRS-MFA10306_CRS-OFA10343_CRS-W4FA11147_CRS-O-90mc-EFA10679_CMC-RSFA10678_CMC-SSFA10677_CMC-DFA10676_CMC-MFA10680_CMC-OFA10714_CMC-W4FA11155_CMC-O-90

D=21.56 mm PMMA

Xr-EFA10808_LC1-RSFA10810_LC1-DFA11372_LC1-MDFA10807_LC1-MFA10809_LC1-RECFA11104_LC1-O-90

50 mm (4UP) PMMA

Xr-EC10700_ROCKET-4-XR-MC10702_ROCKET-4-XRMC-Wmc-EC10702_ROCKET-4-XRMC-WmX-6C10385_MX6-4-SSC10386_MX6-4-MC10387_MX6-4-W

D=21.56 mm PMMA

Xp-E / Xp-GFA10661_LXP-RSFA10663_LXP-DFA10660_LXP-MFA11116_LXP-O-90FA10662_LXP-RECFA10832_LXP-Wmc-EFA10613_LM1-RSFA10650_LM1-DFA10614_LM1-MFA11067_LM1-O-90FA10615_LM1-RECXr-EFA10653_LC1-RSFA10655_LC1-DFA10652_LC1-MFA11105_LC1-O-90FA10654_LC1-RECFA11045_LC1-W-tapemX-6FA10695_LMX6-DFA10696_LMX6-RSFA10697_LMX6-MFA10698_LMX6-RecFA11108_LMX6-O-90

15.4mm X 19.6mm PMMA

Xp-E / GC10926_STRADA-B-XPCA10927_STRADA-B-XP-TAPEC10949_STRADA-B2-XPCA10950_STRADA-B2-XP-TAPEXr-EC10924_STRADA-B-XRCA10925_STRADA-B-XR-TAPE

15.5mm X 19.6mm PMMA

Xr-EC10966_STRADA-C-XRCA10967_STRADA-C-XR-TAPEXp-E / Xp-GC11252_STRADA-C2-XPCA11253_STRADA-C2-XP-TAPE

mX-6C11277_STRADA-C-MX6CA11348_STRADA-C-MX6-TAPE

15.4mm X 19.6 mm PMMA

Xr-EC10757_STRADA-DW-XRCA11179_STRADA-DW-XR-TAPEXp-E / Xp-GC11255_STRADA-DW-XPCA11256_STRADA-DW-XP-TAPE


Xp-E / Xp-GC10818_STRADA-A-XPCA10823_STRADA-A-XP-TAPE


Xr-EC11185_STRADA-DN-XRCA11186_STRADA-DN-XR-TAPE

RS= Real Spot

SS= Smooth Spot

D= Diffuser

M= Medium

O= Oval

REC= Rectangular

The FWHM angle of a particular lens depends on the lens features. Approximate values to each types are:

RS (real spot) ~ ±4° SS (smooth spot) ~ ±7° D (diffuser) ~ ±10° M (medium) ~ ±15° W (wide) ~ ±25° WW (extra wide) ~ ±30° O (oval) ~ ±5° x ±20° REC (rectangular) ~ ±20° x ±10°

38 39

Metalcore PCBs for XLamp® High Power LEDs

Featuresn Easy to usen RoHS and REACH compliantn Rear side potential freen Available for every Cree HP Series

Even though LEDs have better efficiency than traditional light sources, the waste of temperature is really high. Through the very small light emitting Chip-area a heat dissipation is in most of the cases absolutely essential. Because with increasing Chip-temperature the Brightness is decreasing. Also the Lifetime is direct affected by the heat stress. With the MSC PCB series for High Power LEDs you can make a basic step to go easily more efficient with an higher lifetime.

PC

Bs

Diameter Height Width depth Material Panelsize Additional Information

Roundone

XR Series 20,0 mm 2,0 mm Aluminium 15 2 Mounting Holes

Roundfour

XP SeriesXR SeriesMCE Series

34,0 mm34,0 mm44,0 mm

1,65 mm Aluminium Single PCB

- 4 Mountingholes for LEDIL GT4 XP

(XP-Series)- 4 Mountingholes for

LEDIL Cute (XR-Series)

Roundseven

XP Series 35,0 mm Aluminium Single PCB

3 Mounting Holes

Overview

XM-L Series

MX-3 Series

MX-6 Series

XP-G Series

XP-E Series

XP-C Series

MC-E Series

XR-E Series

XR-C Series

Seriell Connection Parallel Connection

Roundone X X

Roundthree X

Roundfour X X X X X X

Roundseven X X X

Staronesmall X X X X X X X

Starone X X X X X X X X X X

Strarthree X X X

Microone X X X

Minione X X X

Ceramicone X X X

Stripeeight X X X

38 39

PC

Bs

Diameter Height Width depth Material Panelsize Additional Information

Staronesmall

XP SeriesMX Series

16,0 mm 2,0 mm Aluminium 30

Starone

XP SeriesMCE Series MX SeriesXML SeriesXR Series

20,0 mm 1,5 mm Aluminium 30

Starthree

XP Series 19,9 mm Aluminium 30 RGB or Single Colour

Microone

XP Series 1,5 mm 4,5 mm 10 mm Aluminium 30

Minione

XP Series 8,0 mm 3,5 mm Aluminium 80

Ceramicone

XP Series 8,0 mm 8,0 mm Ceramic 165

Stripeeight

XP Series 10,0 mm 240,0 mm Aluminium Single PCB

Every seperate PCB has 4 Mountingholes

Can be cutted every 3 cm

40 41

Intelligent LED Drivers for General Illumination Applications

DR

IvE

RS

& C

ON

TR

OL

LE

RS

FeaturesnLED Driver wirh Current ControlnMulti Channel supportnI2 C/SPI control interface to MCU, up to 16 devices on one busnSmall packagesnHigh efficient switcher technologiesnReference designs availablenSupports wide power levels nAdaptive power control of any AC/DC systemsnInterface with Atmel MCUs allows flexible implementations like DALI or Zigbee addressingnAging control and robust system designnDynamic dimming and colour mixing

FocusnResidential and commercial lighting 1 W ...25 W, up to 3000 lmnOutdor and industrial lighting 20 W ... 75 W, 2000 lm up to 10 K lmnLarge Infastructure 65 W... 5 KW, 8000 lm up to 60 K lm

ApplicationsnLED projectorsnPico projectorsnTV backlightingnIndustrial displays & notebooks nBacklightingnInfrastructure lightingnInterior lightingnArchitural lighting

RGB Architectural Lighting: MSL2100 LED Driver and ATtiny Micro

Infustructior Lighting: MSL3082 LED Driver and ATtiny Micro

Interior Lighting: MSL3085 LED Driver and ATtiny Micro

40 41

DR

IvE

RS

& C

ON

TR

OL

LE

RS

LED Driver Families – General LED Lighting Product Family

Part Number Description Max I_LED per String

Market Segments

MSL2040/241/42 4-String RGB or White LED Drivers with Adaptive Power Control; E² PROM, and I² C / SMBus options 1 A Architecture,

indoor lighting

MSL2100 8-String, High Power, RGB LED Drivers, Adaptive Power Control; E² PROM, and I² C / SMBus interface 1 A Architectural

lighting

MSL3082/85 8-String, High Power, White Drivers for Adaptive Power Control; E² PROM, and I² C / SMBus interface 1 A

Infrastructure, indoor lighting,

3D monitors

MSL1060/61/... 6-String LED Drivers with internal Boost Regulator (1.1 MHz 48 V); I² C Interface with 1 or 4 slave IDs 30 mA

Traffic lights, LED light bars


LED Driver Families – LED Backlighting Product Family

Part Number Description Max I_LED per String

Market Segments

MSL1060/61/64 6-String LED Drivers with internal Boost Regulator (1.1 MHz 48 V); I² C Interface with 1 or 4 slave IDs 30 mA Industrial, Medical,

NB

MSL2040/41/42 4-String RGB or White LED Drivers with Adaptive Power Control; E² PROM, and I² C / SMBus options 1 A Low-end Edge-lit

TVs, 3D TVs

MSL3162/63/64* 16-String RGB & White LED Drivers, Adaptive Power Control, E² PROM, and SPI / I² C / SMBus interface 100 mA High-end Direct

Backlit TVs/

MSL2160/61/62 16-String White & RGB LED Drivers with Adaptive Power Control, Black frame, E² PROM, and SPI / I² C / SMBus options 1 A

Edge-lit TVs, 3D TVs

MSL3167/68 16-String White LED Drivers, Adaptive Power Control, PWM input, Auto-Fault handling; In & Out-of-Phase strings 30 mA Monitors

LED Driver Modules for Industrial / Medical LCD Panels

Part Number Strings LEDs per String

Current Settings per String

(mA)

Input Range DC to DC Boost

Power (Watts)

PWM Size

MSLB9061 6 12 15, 20, 25, and 30 3.3 V to 28 V 1.1 MHz 10 Internal/External 0.73“ x 1.95“

MSLB9082 8 10 50, 60, 70, 80, 100, 120, 140, and 160 10V to 16V 1.1 MHz 20 Internal/

External 1.0“ x 2.0“

42 43

Driver ICs and DC/DC Converters for HB LED Control

E981.01: 80 W on 12.68 cm2

DR

IvE

RS

& C

ON

TR

OL

LE

RS

DR

IvE

RS

& C

ON

TR

OL

LE

RS

E910.25, E910.26The single channel DC/DC controllers for external N-channel power MOSFETs are dedicated to drive a LED string. The ICs support step up, step down, flyback, SEPIC or Cuk topology. In addition to the E910.26, the E910.25 includes enhanced short circuit and overload protection.

E910.27, E910.28 Step down DC/DC controller with internal or external reference voltage. The devices are suitable for SMPS or constant current LED driver applica-tions. The E910.27 includes a FET to drive up to 2.8 A.

E981.06* Combined single channel SMPS and LED controller. It is suitable for con-stant current, dimmable LED drivers or constant voltage SMPS, both with high efficiency.Product Specifications

ELMOS “made in Germany” ICs are well known as high quality products and the devices are widely used in applications where high reliability is needed. All de-vices are qualified for use in automotive applications. The DC/DC converter and driver IC lineup covers a small number of ICs that are suited to drive high bright-ness (HB) LEDs. Excellent power efficiencies and marginal EMI issues are the basis for robust and stable end products.

E910.96*Combining a multi-topology SMPS with four LED current controllers the E910.96* is an ideal solution for step up, flyback, buck-boost or SEPIC topologies. Each of the four channels includes two programmable reference voltages and can drive four LED strings separately.

E981.01 A multiphase booster IC which can drive up to nine phases. This device is dedicated to high voltage applications and can power loads up to 500 W or more. Just ceramic capacitors on the input and output side are required to save space, increase lifetime and re-duce cost of the complete system. Thisdevice is dedicated to high-brightness LED modules.

Part Number

Channels Input voltage (v)

Output Temperature Range

Technology / Topology

E910.25 1 3 - 60 V ext. FET -40° C to + 125° C PFM / boost, flyback, Cuk and SEPIC enhanced short circuit and overload protection

E910.26 1 3 - 60 V ext. FET -40° C to + 125° C PFM / boost, flyback, Cuk and SEPIC

E910.27 1 5 - 40 V int. FET (up to 2.8 A) -40° C to + 125° C PFM / step down, high side current sense & limiting

E910.28 1 5 - 60 V ext. FET -40° C to + 125° C PFM / step down

E981.06* 1 5 - 40 V ext. FET -40° C to + 125° C Step up, flyback, buck-boost or SEPIC 500kHz switching, SMPS & LED control

E910.96* 3 5 - 60 V ext. FET -40° C to + 125° C Step up, flyback, buck-boost or SEPIC 500kHz switching, SMPS & LED control

E981.01 9 5 - 60 V ext. FET -40° C to + 125° C flyback, boost, SEPIC

* Under development

Application notes and reference designs

are available!


42 43

Microcontrollers for LED Lighting ControlRL78/I1A – New Lighting ASSP! Makes the future of lighting a reality

DR

IvE

RS

& C

ON

TR

OL

LE

RS

Constant Current Controln64 MHz 16-bit PWM timers generate up to 6 outputsn11 channels of ADCs interlocked with PWM timersnFast PI Processing in HW with integrated MACnIntegrated Dithering function allows 0.97 nS resolutionnIntegrated soft-start function

Survival CapabilitiesnOver-current Protection Integrated 6 channel analogue comparators interlocked with PWM timers for immediate HW reactionnThermal Management Integrated temperature sensornHigh Temperatures Support Guaranteed operation at up to 125°

PFC ControlnCritical Conduction ModenContinuous Conduction ModenDiscontinuous Conduction ModenDigital Interleaved PFC control supported

Fine Dimming6 channels of integrated 16-bit timers internally ANDed with PWM outputs to provide individual 16-bit dimming for each LED channel

Extended DALInSelectable 16, 17, 24 bit frames of DALI communications supported on chip.nDMX512 and RDM also supported


RL78 Lighting ASSP

LED Control Demonstration KitThe RL78/I1A DC/DC LED control demonstration kit enables system designers to experience the benefits of MCU-based solutions for LED driver development. They can also learn about LED constant current control and various methods of dim-ming using the lighting-specific RL78/I1A MCUs. The board implements a programmable 3-channel LED constant 350 mA current control in buck converter topology.An important feature of the kit is the new version of a very comprehensive and easy-to-use software GUI tool, called the Applilet EZ for HCD. The Applilet EZ for HCD enables very easy graphical configuration of an LED lighting system while also generating pre-compiled C code for the RL78/I1A MCUs. It enables system designers to program the target device using only a USB cable. Using the Applilet EZ for HCD software tool, they can generate communication protocol stacks for DALI and DMX512 in seconds.

Application Partnumber Description

Intelligent Lighting R5F107AEGSP#V0 RL78/I1A, 64k Flash, 4k RAM, SSOP-32 , 2.7~5.5 V, 32 MHz, -40~105°C

Intelligent Lighting Y-RL78-DCDC-LED LED Control demonstration kit for RL78/I1A


RL78-I1A reference board

44 45

Single channel LED driver with PFC – High Performance Optocouplers – MOSFET‘s for LED Lighting

DR

IvE

RS

& C

ON

TR

OL

LE

RS

Single channel LED driver with PFC – R2A20134 and R2A20135 – a dedicated solution for LED retrofi t bulbs PFC function IC with a single channel LED drive


TopologynHigh-side step-down retrofitnLow-side buck-boostnLow side step downnHigh-side buck-boostnFlyback topologynPeak currentnAverage currentnConstant input-power control

FlexibilityAdjustable frequency 25 KHz - 250 KHz Wide choice of inductors for the appli-cation BOM cost reduction accordingly Integrated over voltage protection High temperature support of up to 150 °C Small package: SOP-8


LED Driver R2A20134 Single Channel LED driver with PFC, SOP-8LED Driver R2A20135 Single Channel LED driver with PFC and dimming function, SOP-8


Power Supply PS2381-1 High-speed high-isolation photocouppler, 4-LSOP

High performance Optocouplers to match any type of lighting system requirements

FeaturesnRenesas is one of the World largest supplier of optocouplersnHigh isolation for high and low voltage with safty certificate (UL, VDE, …)nVery small packages were offered

NEW: nA part with a 2,3 mm thin LSOP package but still with 8 mm creepage distancenHigh temperature support up to 115°C

ApplicationsnIsolation specified by DALI communications protocolnPower supply stage isolation in mains-powered LED driversnIsolation for a lighting control system from LED driversnIsolation for mains failure or battery failure detection in emergency lighting applications

MOSFET‘s for LED Lighting

FeaturesnRenesas is one of the World largest supplier of MOSFET`snThe range of supported current goes to 180A at 40 Volt devices and to 10aA at 600V devices.nNew parts with low gate charge are available (ex. 6nC at a 10A /600 Volt Device). nLowest Rdson

nWide range of package optionsnUp to Tchmax = 175°C on selected Devices


Power Supply RJK60S5DPN 600V MOSFET with Rdson=150mOhm, Qgd=6nC, TO-220ABPower Supply RJK60S5DPK 600V MOSFET with Rdson=150mOhm, Qgd=6nC, TO-3PSGPower Supply RJK4532DPD

R2A20135

LED control circuit evaluation board

PS2381-1

TO-252ZP

44 45

AC/DC LED Controller, DC/DC LED Controller and LED Drivers for RGB Clusters

DR

IvE

RS

& C

ON

TR

OL

LE

RS

DC-DC LED ControllerStep-Down constant current DC-DC LED driver with integrated power switch. Only 4 external components for full protected constant current source required. Very high efficiency of 96% over entire input voltage range due to PFM control. Dimming function integrated on board with external clock signal.

MBI6651 MBI6652

Topology Buck Converter with integr. Mosfet

Max. Output Current 1A 750 mA

Supply voltage 9 ~ 36 VDC 6 ~ 30 VDC

Max. Sustaining voltage 40 V

Control Scheme Hysteretic PFM

Protection Features Thermal Shutdown, UV-Lockout, LED open/short circuit, LEB

Application Constant Current Source, High Power LED Lighting

Package TO-252-5L*, SOT-23-6, MSOP-8L

AC-DC LED ControllerStep-Down AC-DC controller IC with integrated driver for separate power stage. The on board driver is able to switch Mosfets with up to 3A output current. Very high efficiency over the input voltage range with output accuracy of +/-5%. LED current dimming possible via DIM pin.

MBI6901

Topology Buck Converter / ext. Mosfet

Supply voltage 85 VAC - 265 VAC

Control Scheme Hysteretic PFM

Efficiency Typical +/- 5 %

Protection Features Thermal Shutdown, UV-Lockout, OVP

Applicationcation General LED Illumination, PSU for Light Panels

Package MSOP-8L

LED Drivers for RGB ClustersConstant current driver with adjustable current for each channel by three ex-ternal resistors. Two selectable gray scale Modes (16/10 bit) with embedded or external clock signal. High quality monitoring without flickers due to S-PWM technology. Excellent output accuracy between each channel and IC (typ. +/-3%). Clock reverse function supports long distance data transmission. Reliable and simple data transmission due to Daisy-Chain topology and two wire interfaces.

MBI6020 MBI6030 MBI6010 MBI6024

Output channels 3 12

Supply voltage 3.3 ~ 5 V 5 V; 8 ~ 30 V 6.0 ~ 12 V 3V ~ 5.5 V

Constant output per channel 5 - 50 mA 5 - 150 mA 5 - 60 mA 3 - 45 mA

Max. sustaining voltage 17 V 40 V 17 V 17 V

Control scheme 16 Bit S-PWM

Application Neon Lamp Alternative, Decorative Lighting, LED Strips

Package SSOP16; QFN3x3

SSOP16; QFN4x4

SSOP16; QFN4x4

SSOP24, QFN4x4


DC-DC LED Controllers

High Output Current (up to 1.44A), Rugged Package (IP67)

AC/DC LED Power Supply

46

DR

IvE

RS

& C

ON

TR

OL

LE

RS

ParametersnUniversal: Input range of 90-264 VAC, 47-63 HznSelection: Output currents range of 300 mA to 1200 mA nPowerful: Driving from 3 W to 63 WattnSafe: GB195110.1-2004/ IEC61347-1:2003, EN55015, EN61000, EN61547nRugged: Water proof and dust tight IP67 rated enclosures

BenefitsnWithstand water immersion of up to 1m in depth and protect dust infiltrationnTurn key solution: minimize applications, energy costs and carbon footprintnHighly protected outputs and performance, operated near to full loadnPowering single units or arrays of LEDs

Series Max Output Power

(W)

Output Current

(mA)

Output voltage Range

(v)

Input voltage Range

(vAC/Hz)

Isolation voltage

(vAC)

Efficiency (%)

AMER3-0470KZ 3 700 ± 30 2 ~ 4

90-264/ 47-63

3 k 60

AMER4-1230KZ 4 325 ± 25 2 ~ 12 3 k 60

AMEPR7-1260KZ 7 600 ± 30 2 ~ 12 3 k 80

AMEGR8-1270KZ 8 700 ± 30 2 ~ 12 3 k 75

AMEPR8-2435KZ 8 350 ± 25 2 ~ 24 3 k 80

AMEPR8-1270KZ 8 700 ± 30 2 ~ 12 3 k 80

AMEGR11-3660KZ 12 325 ± 25 15 ~ 36 3 k 75

AMEGR15-5030KZ 17 325 ± 25 25 ~ 50 3 k 75

AMEGR17-2470KZ 17 700 ± 30 12 ~ 24 3 k 75

AMEGR25-3670KZ 26 700 ± 30 16 ~ 36 3 k 80

AMEGR34-4870KZ 35 700 ± 30 25 ~ 48 3 k 80

AMER48-48100KZ 50 1000 ± 50 30 ~ 48 3 k 85

AMER55-38144KZ 57 1440 ± 70 25 ~ 38 3 k 85

AMER63-9070KZ 65 700 ± 30 65 ~ 90 3 k 85

AC-DC Constant Current LED Drivers

IP67: AMEGRXXX IP67: AMERXXXIP67: AMEPRXXXIP67: AMERXXX 2,5 x 2,5 cm

47

DR

IvE

RS

& C

ON

TR

OL

LE

RS

FeaturesnShort circuit, over current and over voltage protectionnHigh efficiencies up to 85%nOperating temperature range of -40°C to +55°C at full loadnInput to output isolation of 3000 VACnOutput voltage swing range of 4 VDC to 90 VDCnSmallest form factor

ApplicationsnStreet signs and traffic lightsnHarsh outdoor and indoor applicationsnIndustrial nArchitectural nMajor appliances


AC/DC constant current with Power Factor Correction (PFC) Series Max

Output Power

(W)

Output Current

(mA)

Output voltage Range

(v)

Input voltage Range

(vAC/Hz)

Isolation voltage

(vAC)

Efficiency (%)

AMEGR8-2435KZ-C1 8 325 ±25 12-24 90-264/ 47-63 3k 80

AMEGR25-3670KZ-C1 26 700 ±30 25-36 175-250/47-63 3k 82

AMEGR30-30100KZ-C1 30 925 ±75 15-30 90-264/ 47-63 3k 85

AMEPR30-12250AZ 30 2500 5-12 90-264/ 47-440 3k 82

AMEPR30-24140AZ 34 1400 12-24 90-264/ 47-440 3k 84

AMEPR30-5070AZ 35 700 36-50 90-264/ 47-440 3k 91

AMEPR30-36100AZ 36 1000 24~36 90-264/ 47-440 3k 85

AMER45-30150KZ-C1 45 1375 ±125 15-30 90-264/ 47-63 3k 85

AMER48-48100KZ-C1 50 1000 ±50 30-48 90-264/ 47-63 3k 85

AMER54-30180KZ-C1 54 1725 ±75 15-30 90-264/ 47-63 3k 85

AMEPR60-50120AZ 60 1200 36-50 90-264/ 47-440 3k 87

AMER60-30200KZ-C1 60 1925 ±75 15-30 90-264/ 47-63 3k 85

AMEPR60-24250AZ 60 2500 12~24 90-264/ 47-440 3k 85

AMEPR60-12500AZ 60 5000 5-12 90-264/ 47-440 3k 84

AMEPR60-36170AZ 61 1700 24~36 90-264/ 47-440 3k 86

AMER90-50180AZ 90 1800 36- 50 90-264/ 47-440 3k 89

AMER90-24375AZ 90 3750 12-24 90-264/ 47-440 3k 87

AMER90-36250AZ 90 2500 24-36 90-264/ 47-440 3k 88

AMER90-30300KZ-C1 94 3000 ±0.15 20-30 170-250/ 47-63 3k 88

AMER120-50250AZ 105 2500 30-50 90-264/ 47-440 3k 88

AMER120-30400KZ-C1 120 3900 ±0.1 20-30 170-250/ 47-63 3k 88

AMER120-24500AZ 120 5000 12-24 90-264/ 47 440 3k 86

AMER120-36340AZ 122 3400 24-36 90-264/ 47 440 3k 87

AMER150-50300AZ 150 3000 36- 50 90-264/ 47 440 3k 89

AMER150-36420AZ 151 4200 24-36 90-264/ 47 440 3k 88

AMER150-24630AZ 151 6300 12-24 90-264/ 47 440 3k 87

48

High Output Current (up to 1.2A), high Efficiency of 96%

DC/DC Constant Current LED Drivers

48

DR

IvE

RS

& C

ON

TR

OL

LE

RS

FeaturesnShort circuit protectionnOutput current accuracy of up to ±2%nHigh efficiencies up to 96%nRemote ON/OFF control function nBoth PWM and analog voltage dimming control (0 – 100%)nWide operating temperature of -40 oC to +85 oC at full load

ApplicationsnIndoor/outdoor displaysnRoad and rail traffic signs and signalsnExterior/interior lighting for automotivenConsumer productsnIndustrial productsnTelecommunication

BenefitsnShort circuit protection is a critical safety feature to protect the load circuit and the driver from danger- ously high current levels and catastrophic failuresnHigh efficiency rates ensure excellent heat redistribution, eliminate hot spots and contribute to reducing the carbon footprint of the end applicationnAimtec’s LED drivers ensure the constant colour and brightness that is required for today’s most demanding LED applicationsnCompatible with a wide range of LEDs manufacturers, the AMLDL-Z and AMLD-IZ series are fully integrated, feature rich modules, designed to be as reliable as the LEDs they drivenCapable of powering either single unit or arrays of LEDs for easy integration into a multitude of applications


Series Case Type Input voltage(vAC/Hz)

Output voltage Range (v)

Output Current Range (mA)

Efficiency

AMLD-6015Z DIP24 7~60 2 ~ 57 300 97

AMLDL-3030Z DIP14 7~30 2 ~ 28 3 95

AMLDL-3035Z DIP14 7~30 2 ~ 28 3 95

AMLD-3630IZ DIP24 5~36 2 ~ 32 3 96

AMLD-3635IZ DIP24 5~36 2 ~ 32 3 96

AMLD-6025Z DIP24 7~60 2 ~ 57 3 97

AMLDL-3050Z DIP16 7~30 2 ~ 28 3 95

AMLD-3650IZ DIP24 5~36 2 ~ 32 3 96

AMLD-6030Z DIP24 7~60 2 ~ 57 3 97

AMLDL-3060Z DIP16 7~30 2 ~ 28 3 95

AMLD-3660IZ DIP24 5~36 2 ~ 32 3 96

AMLDL-3070Z DIP16 7~30 2 ~ 28 3 95

AMLD-6035Z DIP24 7~60 2 ~ 57 3 97

AMLD-3670IZ DIP24 5~36 2 ~ 32 3 96

AMLD-3680IZ DIP24 5~36 2 ~ 32 3 96

AMLD-6050Z DIP24 7~60 2 ~ 57 3 97

AMLDL-30100Z DIP16 7~30 2 ~ 28 3 95

AMLD-3690IZ DIP24 5~36 2 ~ 32 3 96

AMLD-36100IZ DIP24 5~36 2 ~ 32 3 96

AMLD-36110IZ DIP24 5~36 2 ~32 3 96

AMLD-36120IZ DIP24 5~36 2 ~ 32 3 96

AMLD-6070Z DIP24 7~60 2 ~ 57 3 97

AMLD-60100Z DIP24 7~60 2 ~ 48 3 97

DIP14 / DIP16

DIP24

49

DR

IvE

RS

& C

ON

TR

OL

LE

RS


AMLDLW-Z

AMLDV-NZ

AMLDLW-Z – High Efficiency LED Driver 4:1 input voltage range, constant current output up to 1000 mA

The AMLDLW-Z series of DC/DC constant current LED drivers featuring wire connections that can be attached directly to the LED string expands the line of Aimtec.

AMLDLW-Z accepts a wide input voltage range of 7~30 VDC, stepping down to an output voltage range of 2~28 VDC and producing constant current outputs of either 350 mA, 500 mA, 700 mA or 1000 mA, based on the selected model. Maximum output power ranges accordingly from 9.8 watts to 28 watts, to support high-brightness LED applications.

Boasting efficiency rates of 95 %, these feature rich LED drivers are RoHS compliant and operate at temperature ranges of -40 °C to +85 °C at full load, for use in a multitude of indoor and outdoor applications. Value added features include open and short LED protection, PWM/digital and analog voltage dimming function and remove ON/OFF control function, making the AMLDLW-Z series an easy choice for luminary designers who seek a turnkey solution without the need of any external components.

AMLDv-NZ – LED Driver in Space Efficient Surface Mount Package Ultra wide input voltage range, up to 700 mA constant current output

Producing more than 16 W/in2 the AMLDV-NZ series from Aimtec consists of high power constant current DC/DC LED drivers in a SMD package of just 23.86 x 13.7 x 8 mm. Featuring an input range of 5.5~48 VDC that steps down to an output voltage range of 3.3~36 VDC, the AMLDV-NZ series produces constant output currents from 300~700 mA.

These modular LED drivers include remote ON/OFF function, continuous short circuit protection and maintain an efficiency rate of 96% at full load. Providing both PWM and analog dimming functions that ensure constant and consistent colour and brightness of the LED lights they drive. All AMLDV-NZ models operate at industrial temperature range of -40 °C to +85 °C, for use in a variety of indoor and outdoor applications.

RoHS compliant and designed to meet the rigorous EMI specifications of EN 55022 and the EMC specifications of EN 61000 the AMLDV-Z series of LED drivers are competitively priced. Samples are available now, for production volumes contact MSC Vertriebs GmbH.

Series Power (W) Input voltage(v)

Output voltage Single (v)

Max Output Current (A)

Package

AMLDv-4830-NZ 10,8 5.5~48 3.3~36 0,3 SMD

AMLDv-4835-NZ 12,6 5.5~48 3.3~36 0,35 SMD

AMLDv-4850-NZ 18 5.5~48 3.3~36 0,5 SMD

AMLDv-4860-NZ 21,6 5.5~48 3.3~36 0,6 SMD

AMLDv-4870-NZ 25 5.5~48 3.3~36 0,7 SMD

50 51

AC/DC LED Drivers Power Supply

DC/DC Constant Current LED Drivers

DR

IvE

RS

& C

ON

TR

OL

LE

RS

The AC-DC constant current LED driver family from YDS offers a power range of 60 to 96 W with universal input voltage range of 90 to 264 VAC and constant current outputs of 350 to 5000 mA. All family members provide an integrated PFC circuitry for enhanced efficiency (PF=0.95). Additionally all protection features are integrated on board: Short Circuit, Overvoltage Protection and Over Temperature protection. To meet all customer requirements concerning safe indoor and harsh outdoor envi-ronments the power supplies are housed in IP67 class cases. All family members are qualified due to the standard EN55015 and EN55022(CLSPR22) Class B. Target appli-cations are indoor and outdoor LED Lighting applications and moving sign applications.

YDS DC-DC non-isolated LED drivers provide wide input voltage range 5-36 VDC with constant current output characteristic from 300 to 700 mA with output power from 10.2 to 23.8 W. Protection features like short circuit and overtemperature control for reliable operating conditions are integrated on board. Digital dimming is possible by adjusting the output current through the pulse width of an external PWM signal. Target applications are single LED or arrays of LEDs for manifold use: Interior Lighting for industrial or consumer products as well as road and rail traffic signs.


Part Number Max. Output Power [W]

Output Current (mA)

Output voltage Range (v)

Input voltage Range (vAC/Hz)

Efficiency (%)

LDA24-0.30 10.2 0-300 2-34 5-36 95

LDA24-0.35 11.9 0-350 2-34 5-36 95

LDA24-0.50 17 0-500 2-34 5-36 95

LDA24-0.60 20.4 0-600 2-34 5-36 95

LDA24-0.70 23.8 0-700 2-34 5-36 95


Part Number Max. Output Power (W) / Max. Output Power per Channel

Number of Channels

Output Current (mA) / per Channel

Output voltage Range (v) / per Channel

Input voltage Range (vAC/Hz)

Isolation voltage (vAC)

Efficiency (%)

LGA100-S12 60 1 5000 6 ~ 12 90 ~ 264 / 47-63 Hz 3 kV 88

LGA100-S15 75 1 5000 7.5 ~ 15 90 ~ 264 / 47-63 Hz 3 kV 88

LGA100-S20 96 1 4800 10 ~ 20 90 ~ 264 / 47-63 Hz 3 kV 88

LGA100-S24 96 1 4000 12 ~ 24 90 ~ 264 / 47-63 Hz 3 kV 88

LGA100-S27 96 1 3550 13.5 ~ 27 90 ~ 264 / 47-63 Hz 3 kV 89

LGA100-S36 96 1 2650 18 ~ 36 90 ~ 264 /47-63 Hz 3 kV 90

LGA100-S48 96 1 2000 24 ~ 48 90 ~ 264 / 47-63 Hz 3 kV 90

LGA060-F42-01 60 W / 14.7 W 4 350 ± 30 36 ~ 42 90 ~ 264 / 47-63 Hz 3 kV 88

LGA100-F36-02 100 W / 23.4 W 4 650 ± 30 30 ~ 36 90 ~ 264 / 47-63 Hz 3 kV 88


LED Drivers

Drivers for Power Supply

50 51

LED Lighting Connector Solutions

CO

NN

EC

TO

RS

DF 57Pitch 1.2 mmPositions 2, 3, 4, 5, 6Rated current 1.5-2.5 ACable size 30 - 28 AWGMounting style SMT

DF 13Pitch 1.25 mmPositions 2-15, 18, 20, 30, 40Rated current 1 ACable size 32-26 AWGMounting style DIP/SMT

DF 14Pitch 1.25 mmPositions 2-10, 15, 20, 25, 30Rated current 1 ACable size 32-26 AWGMounting style SMT

DF 3Pitch 2.0 mmPositions 2-15Rated current 3 ACable size 28-22 AWGMounting style DIP/SMT

DF 11Pitch 2.0 mmPositions 4-34 even, 40Rated current 0.5-2 ACable size 30-22 AWGMounting style DIP/SMT

DF 59Pitch 2.0 mmPositions 2, 3, 4Rated current 3 ACable size 22 AWGMounting style SMT

GT8EPitch 2.0 mmPositions 2, 8, 10, 12, 16, 20, 24Rated current 3 ACable size 28-20 AWGMounting style DIP/SMT

DF33Pitch 3.3 mmPositions 2-6, 8, 10, 12Rated current 4-5 ACable size 22-20 AWGMounting style DIP

HR30Pitch Circular connector mmPositions 3, 6, 10, 12Rated current 2.5 ACable size 26-30 AWGMounting style Soldering/Crimp

LFPitch Circular connector mmPositions 3, 4, 6, 11, 12, 20Rated current 2,1 ACable size 16-26 AWGMounting style Soldering


Wire to Board Connections

52 53


DR

IvE

RS

& C

ON

TR

OL

LE

RS

CO

NN

EC

TO

RS

ACHPitch 1.2 mmPositions 2, 3, 4Rated current 1.5-2.0 ACable size 30-28 AWGMounting style SMT/Crimp

ZHPitch 1.5 mmPositions 2-13Rated current 1 ACable size 30-26 AWGMounting style SMT/THT/Crimp

LEBPitch 4.0 mmPositions 1, 2Rated current 3 ACable size 26-22 AWGMounting style SMT/Crimp

SHPitch 1.0 mmPositions 2-20Rated current 1 ACable size 32-28 AWGMounting style SMT/Crimp

SFvPitch 2. mmPositions 2Rated current 1 ACable size 28 AWGMounting style SMT/Crimp

SFDPitch 1.1 mmPositions 10Rated current 1 ACable size 28 AWGMounting style SMT/Crimp

SFGPitch 1.1 mmPositions 5Rated current 1 ACable size 28 AWGMounting style SMT/Crimp

SFKPitch 1.8 mmPositions 2Rated current 3.2 ACable size 22 AWGMounting style SMT/Crimp

Wire to Board Connections


PHPitch 2.0 mmPositions 2-16Rated current 2.0 ACable size 32-24 AWGMounting style SMT/THT/Crimp

LEAPitch 1.8 mmPositions 2Rated current 3 ACable size 22 AWGMounting style SMT/Crimp

52 53

CO

NN

EC

TO

RS

Inverted SMT Thru Board ConnectorPitch 1.5 mmPositions 2-6Rated current 3 A (4 AWG), 2.5 A (26 AWG),

1.5 A (28 AWG)Cable size 00 AWGMounting style 000

Low Profile Micro Mate-N-Lok ConnectorPitch 3.0 mmPositions 2, 3 and 4Rated current 5 ACable size 20 AWGMounting style SMT

Poke-In Wire ConnectorPitch 4.0 mmPositions 1, 2Rated current 5 ACable size 22-18 AWGMounting style SMT/THT

Hermaphroditic ConnectorPitch 4.0 mmPositions 2, 4, 6Rated current 6 ACable size 22-18 AWGMounting style SMT

IDC SSL ConnectorPitch 4.0 mmPositions 1-4Rated current 8 A (only AWG 12)Cable size 24-18 AWGMounting style SMT/THT

Slim Seal SSL ConnectorPitch 3.5 mmPositions 2, 3 and 4Rated current 5 A (18-20 AWG),

3.5 A (22-24 AWGCable size 24-18 AWGMounting style SMT/THT

54 55


DR

IvE

RS

& C

ON

TR

OL

LE

RS

CO

NN

EC

TO

RS

DF3Pitch 2.0 mmPositions 2-15Rated current 3 ACable size 28-22 AWGMounting style DIP/SMT

DF11Pitch 2.0 mmPositions 4-34 even, 40Rated current 0.5-2 ACable size 30-22 AWGMounting style DIP/SMT

DF1BPitch 2.5 mmPositions 2-16, 18-36 even, 40Rated current 0.5-3 ACable size 30-20 AWGMounting style DIP

GT8EPitch 2.0 mmPositions 2, 8, 10, 12, 16, 20, 24Rated current 3 ACable size 28-20 AWGMounting style DIP/SMT

DF22Pitch 7.92 mmPositions 1-5Rated current 13-30 ACable size 16-10 AWGMounting style DIP

IWPFPitch 2.0 mmPositions 2, 3, 4 and 8Rated current 3 ACable size 26-22 AWGMounting style Crimp

Nector S-Line ConnectorPitchPositions 1-2Rated current 2.5 A and 7 ACable size Mounting style Crimp

Light-N-Lok ConnectorPitchPositions 2 and 3Rated current 5 ACable size 18 AWGMounting style IDC

G13 Style LED RetrofitPitch 12.7 mmPositions 2Rated current 2 ACable size Mounting style T8 and T12

Fluorescent fixtures

Solderless LED Socket, Type CMPitchPositions 6Rated current 0.5 ACable size Mounting style Solderless

Wire to Wire Connections

Solderless Connections

54 5555

Intelligent Development

DE

vE

LO

PM

EN

T


MSC Vertriebs GmbH provides project development services for customization of LED lighting components to the cus-tomer’s requirements, based on an expertise in rapid development and customization for hardware, firmware and software solutions.

Customizing a portfolio of proven technologies by an experienced development teams is key success factor to fast time-to-market and lower development costs. Through the vast portfolio knowledge MSC possesses extensive know how and has access to experts in various domains of lighting, light control and energy management components from a large number of renown suppliers.

We cooperate with a number of expert partners and key customers to provide individual solutions for

n Customized LED light fields for your design and geometry and power requirementsn Smart Power supply for LED light fields with features like dimming, monitoring, fault detection, autonomous controln Communication between lamps or building automation systems or communal light management (e.g. DALI, DXM512, knx, wireless controll, Powerline)n Efficiency management in smart metering or smart grid applications

Our main goal at MSC is not only providing customized products to our customer’s individual demands, but also the degree of development service to cover a broad spectrum.

n Application of standard products in individual projectsn Customization of parameters, outline or key characteristics of our product portfolion Design-in of customer’s specific requirementsn Turnkey projects from initial design to manufacturing of customized componentsn Individual contract development

Based on this, we aim to be an effective, flexible partner to provide solutions to satisfy our customer’s implicit and ex-plicit needs. We intend to build long-term and collaborative relationships with our customers and business partners and provide up-market, innovative products.

DE

vE

LO

PM

EN

T

VIII

-9_

2011

-FS

-571

0 ©

MS

C

BerlinTel. +49 30 720089 - 0Fax +49 30 720089 - [email protected]

BraunschweigTel. +49 5341 2999 - 0Fax +49 5341 [email protected]

DuesseldorfTel. +49 211 92593 - 0Fax +49 211 92593 - [email protected]

FrankenthalTel. +49 6233 344 - 0Fax +49 6233 344 - [email protected]

Hamburg Tel. +49 4106 7764 - 0Fax +49 4106 7764 - [email protected]

Hannover Tel. +49 511 616847 - 0Fax +49 511 616847 - [email protected]

JenaTel. +49 3641 6825 - 0Fax +49 3641 6825 - [email protected]

Koblenz Tel. +49 2630 96239 - 11Fax +49 2630 96239 - [email protected]

MunichTel. +49 89 945532 - 0Fax +49 89 945532 - [email protected]

NurembergTel. +49 911 43970 - 0 Fax +49 911 43970 - [email protected]

StuttgartTel. +49 711 78336 - 0 Fax +49 711 78336 - [email protected]

Wiesbaden Tel. +49 611 97320 - 0Fax +49 611 97320 - [email protected]

AUSTRIA

MSC Vertriebs GmbHLeobersdorfTel. +43 2256 63975-13Fax +43 2256 [email protected]

VeldenTel. +43 4274 23222 - 17Fax +43 4274 23222 - [email protected]

CZECH REPUBLIC

MSC-Vertriebs-CZ s.r.o. BlanskoTel. +420 516 411494 - 15Fax +420 516 [email protected]

PragueTel. +420 251 561 130Fax +420 251 562 [email protected]

FRANCE

MSC FranceParisTel. +33 1 45128230Fax +33 1 [email protected]

LyonTel. +33 4 72 756020Fax +33 4 72 [email protected]

NantesTel +33 1 45 12 82 47Fax +33 1 41 80 92 [email protected]

StrasbourgTel. +33 388 651843Fax +33 388 [email protected]

ToulouseTel. +33 4 72 75 60 20Fax +33 4 72 90 92 [email protected]

HUNGARY

MSC Budapest Kft. Tel. +36 1250 90 - 40Fax +36 1250 90 - [email protected]

ITALY

MSC Italia srl Tel. +39 039 63089-1Fax +39 039 [email protected]

MALTA

MSC (Malta) LTD.Tel. +356 21 484804Fax +356 21 [email protected]

NETHERLANDS

MSC Nederland BVTel. +31 78 6920 - 150Fax +31 78 6920 - [email protected]

POLAND

MSC Polska Sp. z o.o.Tel. +48 323 3054 - 50Fax +48 323 3054 - [email protected]

ROMANIA

MSC-Mibatron s.r.l.BucharestTel. +40 31 1023466 +40 21 2302530Fax +40 21 [email protected]

SLOVAKIA

MSC-Vertriebs-SK s.r.o.ZilinaTel. +421 41 5001243Fax +421 41 [email protected]

SPAIN

MSC Iberia S.L.BarcelonaTel. +34 931 505 505Fax +34 931 505 [email protected]

MadridTel. +34 91 72169 - 51Fax +34 91 72169 - [email protected]

SWITZERLAND

MSC-Gleichmann Schweiz AGRotkreuzTel. +41 41 785 8200Fax +41 41 785 [email protected]

Biel/BienneTel. +41 32 366 8565Fax +41 32 366 [email protected]

MontreuxTel. +41 21 965 3500Fax +41 21 965 [email protected]

VolketswilTel. +41 43 35533 - 66Fax +41 43 35533 - [email protected]

TURKEY

MSC Vertriebs GmbHIstanbulTel. +90 216 411 - 2333Fax +90 216 411 - [email protected]

UNITED KINGDOM

MSC-Gleichmann UK LtdBrightonTel. +44 1273 622446Fax +44 1273 [email protected]

Milton KeynesTel. +44 1908 263999Fax +44 1908 [email protected]

WeybridgeTel. +44 1932 268990Fax +44 1932 [email protected]

MSC (Scotland) LTD.Tel. +44 1506 460555Fax +44 1506 [email protected]

NORWAY AREALink Electronic ASTel. +47 69 889899Fax +47 69 [email protected]

DENMARK AREAMK Nordic ApSTel. +45 24 [email protected]

SWEDEN AREAMK Nordic ApSTel. +46 76 1957 [email protected]

Sales Representative

MSC vertriebs GmbH / Head Offi ce Stutensee Industriestraße 16 · 76297 Stutensee Tel. +49 7249 910 - 0 · Fax +49 7249 [email protected]

Sales Organisation EuropeSales Offi ces Germany

GERMANY

FrankenthalTel. +49 6233 347 - 120 WiesbadenTel. +49 611 [email protected]

AUSTRIA

MSC Vertriebs GmbHveldenTel. +43 4274 23222 - [email protected]

BELGIUM

Gleichmann BelgiumWemmelTel. +32 2 459 [email protected]

FRANCE

MSC FranceParisTel. +33 1 [email protected]

ITALY

MSC Lighting Italia(a division of MSC Italia srl)Tel. +39 0438 [email protected]

NETHERLANDS

MSC Nederland BVTel. +31 78 6920 - [email protected]

SWITZERLAND

MSC-Gleichmann Schweiz AG

VolketswilTel. +41 43 35533 - [email protected]

SPAIN

MSC Iberia S.L.BarcelonaTel. +34 931 505 [email protected]

MSC Lighting Competence Center

MSC – Excellence in LEDs

MICROCOMPUTERS SYSTEMSCOMPONENTSvERTRIEBS GMBH

www.msc-ge.com© MSC. All rights reserved. Although great care has been taken in preparing this printed matter, MSC can not be held responsible for any errors or omissions. All information in here is subject to change without notice. All hard-ware and software names used are trade names and/or trademarks of the respective manufacturer. The products highlighted act as examples only. Therefore they may vary in comparison to the originals.

VIII-3_2012-FS-5983

Documents

data sheet

continues

including

00000xxxx

popular xp

wide viewing

winning led

led brings