All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the most updated product specifications. XtraLight ™ reserves the right to change specifications without notice. PROJECT INFORMATION Project Name Catalog # Date Type www.xtralight.com • (800) 678-6960 • [email protected]VNTLED-MEDIUM 192907 1 VIENTO MEDIUM - WILDLIFE FRIENDLY AREA & SITE LED LUMINAIRE FEATURES • Outstanding photometric performance results in sites with excellent uniformity, optimal pole spacing and lower power density. • Optics are completely sealed against moisture and environmental contaminants (IP66). • Low profile architectural design offers a contemporary appearance with excellent light output. • Field serviceable luminaire utilizing Lumileds LED technology. • Controls ready luminaire for independent operation or remote management. • Operating temperature -40°C to +40°C (-40°F to +104°F). CONSTRUCTION • Housing: One-piece die-cast aluminum has integral heat sink fins to optimize thermal management through conductive and convective cooling. • The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. • Housing and door are protected with a thermoset TGIC-polyester powder coat finish using a tightly controlled multi-stage process to a uniform 3 mil thickness (min). This finish provides superior protection from corrosion and maximum environmental durability. • Powder coat finish in bronze, white or custom colors (consult factory). • Post painted in matte black wildlife shield standard to meet FWC compliance. MOUNTING • Integral arm with key hole slot facilitates quick and easy installation. • Nut plate eliminates loose hardware and reduces installation labor. OPTICS • Precision molded optics for superior uniformity, minimal light trespass and maximum pole spacing. • Optical grade polymer is UV stabilized and impact resistant. • IP66 rated LED light engines prevent dust and moisture from degrading performance. • Distributions: Type II, Type III, Type IV and Type V. Types II, III, and IV available rotated right or left 90°, factory installed. • Best-In-Class amber LEDs with a targeted spectrum at 590nm. • Zero uplight (U0) is night sky friendly, reduces wasted light. ELECTRICAL • Voltage: 120-277V 50/60Hz driver (standard); 347-480V 50/60Hz driver (optional). • Class 2 electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 100,000 hours with <1% failure rate. • Surge Protection: 20kA standard. • NEMA twist-lock receptacle available as an option. (Note: Photocontrol or shorting cap required for operation not included). • Dimming: 0-10v dimmable driver available as an option. • Passive Infrared (PIR) Photo/Motion Sensor option available. WARRANTY • 10-year limited warranty. ROTATABLE OPTICS APPROVALS • FWC #2019-116 • ETL listed. Complies with UL 1598 and CSA C22.2 No. 250.0-08 • Suitable for wet locations. • 3G Vibration Rated for Bridge/Overpass Applications per ANSI C136.31-2010, Test Level 2. • IP 66 Optics and Housing. T E N Y E A R W A R R A N T Y APPLICATIONS • Ecologically sensitive areas • Sea turtle nesting beaches • Migratory corridors • Dark-Sky friendly communities • Parking Lots • Parks & Recreation Areas • Security Areas • Mall & Retail Spaces
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the most updated product specifications. XtraLight™ reserves the right to change specifications without notice.
VIENTO MEDIUM - WILDLIFE FRIENDLYAREA & SITE LED LUMINAIRE
FEATURES• Outstanding photometric performance results in sites with
excellent uniformity, optimal pole spacing and lower power density.
• Optics are completely sealed against moisture and environmental contaminants (IP66).
• Low profile architectural design offers a contemporary appearance with excellent light output.
• Field serviceable luminaire utilizing Lumileds LED technology.
• Controls ready luminaire for independent operation or remote management.
• Operating temperature -40°C to +40°C (-40°F to +104°F).
CONSTRUCTION• Housing: One-piece die-cast aluminum has integral heat sink fins to
optimize thermal management through conductive and convective cooling.
• The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life.
• Housing and door are protected with a thermoset TGIC-polyester powder coat finish using a tightly controlled multi-stage process to a uniform 3 mil thickness (min). This finish provides superior protection from corrosion and maximum environmental durability.
• Powder coat finish in bronze, white or custom colors (consult factory).
• Post painted in matte black wildlife shield standard to meet FWC compliance.
MOUNTING• Integral arm with key hole slot facilitates quick and easy
installation.
• Nut plate eliminates loose hardware and reduces installation labor.
OPTICS• Precision molded optics for superior uniformity, minimal light
trespass and maximum pole spacing.
• Optical grade polymer is UV stabilized and impact resistant.
• IP66 rated LED light engines prevent dust and moisture from degrading performance.
• Distributions: Type II, Type III, Type IV and Type V. Types II, III, and IV available rotated right or left 90°, factory installed.
• Best-In-Class amber LEDs with a targeted spectrum at 590nm.
• Zero uplight (U0) is night sky friendly, reduces wasted light.
APPROVALS• FWC #2019-116• ETL listed. Complies with UL 1598 and CSA C22.2 No. 250.0-08 • Suitable for wet locations.• 3G Vibration Rated for Bridge/Overpass Applications per ANSI
C136.31-2010, Test Level 2.• IP 66 Optics and Housing.
VIENTO MEDIUM - WILDLIFE FRIENDLYAREA & SITE LED LUMINAIRE
2
VNTLED-MEDIUM 192907 All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the
most updated product specifications. XtraLight™ reserves the right to change specifications without notice.
02 2M Type II Medium UIN Multi-Volt 120-277V (Std) 20 20kV/20kA (Std) X None
2S Type II Short DIM Dimmable Multi-Volt 120-277V
A Angle Mount3M Type III Medium4S Type IV Short HVU 347-480V5M Type V Square
MediumHVD Dimmable 347-480V
SIZE MODEL ORIENTATION CCT CONTROLS COLOR
M Medium 50 N Normal (Forward)
A Amber 590nm X None (STD) BZ Bronze100 3 2 Twist-Lock Receptacle, 3-pin WH White150 R 1 Right 5 2,3 Twist-Lock Receptacle, 5-pin
L 1 Left 7 2,3 Twist-Lock Receptacle, 7-pin
B 3 FSP-211L3@20'MH/40'DIAD 3 FSP-211L7@40’MH/100’DIA
VNT LED
Size & Model Combinations:
VNT-LED-M-02-50VNT-LED-M-02-100VNT-LED-M-02-150
1. Not Available with 5M Optics2. Photocontrol not included.3. Requires 0-10V dimming driver [DIM] or [HVD] option.4. For FWC compliance, wildlife shield must be used.
Rotated Asymmetric Optics (Type II, Type III & Type IV)
Normal (3MN)
Top View
90° Left (3ML)
Top View
90° Right (3MR)
Top View
Street Side
House Side
Street Side
House Side
Street Side
House Side
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
Custom Colors Are Available
(Consult Factory)
Sample part no.: VNT LED M 02 100 3M N DIM A 20 X X BZ
OPTIONS
HS 1 House Side ShieldRWS 4 Remove Wildlife
Shield
DISTRIBUTION TYPES Distance in units of mounting height values based on 25 ft. mounting height.
Type II Medium Type II Short Type III Medium Type IV Short Type V Square Medium
3
VNTLED-MEDIUM 192907 All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the
most updated product specifications. XtraLight™ reserves the right to change specifications without notice.
VIENTO MEDIUM - WILDLIFE FRIENDLYAREA & SITE LED LUMINAIRE
DIMENSIONAL DATA
Back View
Top View
Bottom View
Side ViewFront View
• Weight: 29 lbs
• 29.0” L x 13.8” W x 6.5” H
MOUNTING DATA DETAIL
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.00
13.75
6.46
29.
00
13.
75
6.4
6
SINGLE
EPA: 1.47 sq. ft.
Two at 90°
EPA: 2.21 sq. ft.
Two at 180°
EPA: 2.95 sq. ft.
Three at 90°
EPA: 3.68 sq. ft.
Four at 90°
EPA: 3.68 sq. ft.
29.00
13.75
6.46
29.00
13.75
6.46
DUAL SSA
EPA: 1.75 sq. ft.
29.00
13.75
6.46
29.00
13.75 6.46
29.00
13.75
6.46
Three at 120°
EPA: 3.16 sq. ft.
4.00"
3.5
4"
R0.50"
R0.27"
1.6
8"
3.1
6"
R0.25"
6.4
6"
0.3
8"
1.3
9"
Front View - Wildlife Shield Side View - Wildlife Shield
WS Option - Dropdown Wildlife Shield Post-Painted Black
4
VNTLED-MEDIUM 192907 All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the
most updated product specifications. XtraLight™ reserves the right to change specifications without notice.
FSP-L7 top and side coverage patterns0'10' 10'20' 20'30' 30'40' 40'
0'
27'
40'
50'50'50' 25' 0' 25' 50'
0'
50'
25'
25'
50'
100'
FSP-L7 dimensions
3.2”81.3mm
1.04”26.4mm
WWW.LEGRAND.US/WATTSTOPPER
WATTSTOPPER®FIXTURE SENSORS & CONTROLS
DescriptionThe FSP-211 mounts in an outdoor lighting fixture and provides multi-level control based on motion and/or daylight contribution. It controls 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, is rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles.
OperationTypically, the sensor ramps lighting On to the selected High mode level when motion is detected and the ambient light level is below the hold off setpoint. After the sensor stops detecting movement and the time delay elapses, lights fade to the Low mode level. If there is no motion during the subsequent cut off time delay, the lights will turn Off. For dusk to dawn control, the integral photocell can switch the lights On and Off based on the ambient light level so that lighting remains on overnight even without motion detection.
Wireless Handheld Configuration ToolInitial setup and subsequent sensor adjustments are made using a handheld configuration tool (FSIR-100). This tool enables adjustment of parameters including high and low modes, sensitivity, time delay, cut off and more. The FSIR-100 is also used to initiate automatic calibration of the FSP-211 ambient light level setpoint. The setpoint is used to hold the controlled lighting off or at low level when there is sufficient daylight. The wireless tool stores up to six sensor parameter profiles to speed configuration of multiple sensors.
ApplicationsThe slim, low-profile FSP-211 is designed for installation inside the bottom of a light fixture body. When fully assembled and installed in an IP66-rated fixture, the sensor and FSP-Lx lenses are IP66 outdoor rated. The sensor is ideal for areas such as parking facilities, gas stations, pedestrian pathways and warehouses. A choice of four lenses ensures complete coverage for mounting heights up to 40’.
LINE VOLTAGE HIGH/LOW/OFF PIR FIXTURE INTEGRATED OUT-DOOR PHOTO/MOTION SENSOR
FSP-211
• Provides line voltage On/Off switching and 0-10 VDC dimming control
• Works with ballasts or LED drivers
• High and low modes fully adjustable from 0 to 10V
• UL244A and UL508; IP66 rated (when fully assembled and installed) for use in wet locations
• This product meets the materials restrictions of RoHS
• BAA/TAA-compliant models available
Features
Fully adjustable high and low dimmed light levels; optional
dusk to dawn control
Adjustable via handheld wireless configuration tool
Adjustable time delay and cut off delay
Designed for LED fixtures; rated for extreme
temperatures and up to 200,000 on/off cycles
IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’
Hold off setpoint with automatic calibration option
for convenience and added energy savings
WATTSTOPPER®
5
VNTLED-MEDIUM 192907 All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the
most updated product specifications. XtraLight™ reserves the right to change specifications without notice.
VIENTO MEDIUM - WILDLIFE FRIENDLYAREA & SITE LED LUMINAIRE
HOUSE SIDE SHIELD OPTICS ACCESSORY
- HSS - -
ACCESSORY
HSS House Side Shield
OPTICS
N NormalLR Rotated
Optics
SIZE
SM SmallMED MediumLRG Large
VNT
FEATURES
• Significantly reduces backlight to minimize light trespass.
• Available for Type II Medium (2M), Type II Short (2S), Type III Medium (3M) and Type IV Short (4S) optics, both NORMAL and rotated LEFT/RIGHT.
• Factory installed as an option when ordered with the luminaire.
• Field installable (tool-free) when ordered as a separate accessory.
CONSTRUCTION
• Low-profile, precision fabricated CNC design.
• Flat black TGIC-polyester powder coat finish using tightly controlled multi-stage process to a uniform 3 mil thickness (min).
• This finish provides superior protection from corrosion and maximum environmental durability.
DIMENSIONS
• 11.38” L x 6.13” W x 0.4” H • Weight: 0.45 lbs
Medium Viento Shown With House Side Shield
Type II Medium + HSS Type II Short + HSS
Type III Medium + HSS Type IV Short + HSS
IES DISTRIBUTION TYPES
ORDER LOGIC
ISO Lines Distance in Units of Mounting Height Values Based on 25 Foot Mounting Height
.1
.2.5
1 2
.1.2
.51
2
5
.1
.2
.51
2
.1
.2
.5
1
2
6
VNTLED-MEDIUM 192907 All information is believed to be accurate at the time of publication. Please contact customer service or visit www.xtralight.com for the
most updated product specifications. XtraLight™ reserves the right to change specifications without notice.