VICWEST Metal Roof Systems 090720

metal roof systems

Vicwest helps you pushthe building envelope

contents

01 Introduction

02 Technical

06 Tradition 100

07 Tradition 150

08 Marquis

10 Prestige

12 TSR

14 Accurib

16 Exposed Fastener

18 Technical

19 Energy Savings & LEEDTM

20 Vicwest Products

The following

pages will guide you through our

comprehensive metal roofing product selection

including steel substrates, finishes, profiles

and various roof assemblies. We also offer

technologically advanced coatings to better

provide weather tightness, combat corrosion

and fading. These coatings will deliver optimum

reflectance for upwards of 40 years.

This is our trusted range of steel building products

backed by the considerable knowledge and

technical expertise of our service teams across

the country. Providing Solutions for the Building

Envelope is Our Crowning Glory.

Standing the Test of Time

For over 100 years, Vicwest has been a leading

manufacturer of premium quality metal cladding,

roofing and decking in Canada, redefining

and setting the standards in metal building

construction and design. Our metal roof systems

are exceptionally functional and architecturally

attractive, offering the most contemporary

designs for commercial, industrial, institutional

and residential buildings.

our crowning gloryvicwest roof systems

Style with Elegance,

Character with Beauty,

Unmistakably Durable

Ametal roof system by

Vicwest adds style

beauty & character to

your building’s design,

regardless of size and

shape demands.

1

2

technicalroofing systems

Single Skin on Rigid DeckingVicwest Roof profiles are ideal in applications wherea solid deck is available for support. Our roof profilesare adaptable to any solid base material such asplywood, steel deck or concrete. To prevent internalair leakage, which can cause condensation problems,Vicwest recommends the use of a good air barrierover the structural material.

System 1000For light industrial applications, choose the Vicwestsystem 1000 as an economical and attractive roof.Vicwest roof products can be used as a single skin orwith or without metal building insulation as required.

System 2000The Vicwest system 2000 roof provides anupgraded system with an L800 Liner sheet airvapour barrier and a wider range of insulationvalues from which to choose.

System 3000The Vicwest system 3000 roof is designed for almostall roofing applications. It combines all the elementsneeded for a high performance weather tight roof. Itintegrates all necessary roofing components andprovides a single source of responsibility for the roofdesign and construction. For a more economicalapproach, where the interior humidity of the buildingis less than 35%, the thermal barrier may be eliminatedand deck fillers installed to support the side and endlaps of the air vapour barrier. Caution must be exercisedto ensure that humidity conditions during constructionalso remain below this level.

Images reflect the

Marquis profile .

Actual components will

vary depending on roof

profile selected.

technicalroof systems & corresponding components

Photo:

Private 10,000 sq. ft.

airplane hangar and

shop, Ilderton, Ontario.

Vicwest roofing is

QC6080 bright red

for easy identification

from the air.

3

4

technicalsystem products reference chart

*Asterics represent Imperial dimensions

5

6

Key Advantages

The Tradition 100 panel with the I-style snap-on capis designed specifically for straight sloped or curvedroof applications over a rigid solid surface. It canbe wrapped across its width to follow a contouredsurface of wall or curved over its length to form acurved parapet wall edge or a barrel vaulted roof.Tradition 100 can be curved along the sheet lengthto a radii ranging from a minimum of 1500 mm tofull straight.

Roof Installation & Preparation

Available in 400 mm and 500 mm widths theTradition 100 profile can be installed as a singleskin on a solid surface without installation or asan exterior sheet as a fully insulated roof systemdesign (System 3000). Please refer to the SystemProducts Reference Chart on page 4.

The surface to which the Tradition 100 is appliedmust be a solid, smooth surface, strong enoughto provided anchorage for the Tradition 100 SnapClips. The entire roof surface should be coveredusing a moisture retardant membrane lappedhorizontally, starting at the eaves, beforeTradition 100 is applied. Refer to the Tradition 100Vicwest Design Guide for complete design andinstallation details.

Side Lap

The 33 mm (1 9/32”) I-style standing seam withsnap-on cap is used on the Tradition 100 roof profile.

tradition100metal roofing system

Creative Flexibility

for Unique Design

Possibilities

Distinctive curved

roofs, furnished with

the Tradition 100

profile in your choice

of material finish make

for attractive curved

parapets, wall edges

or barrel vaulted roofs.

tradition150metal roofing system

Key Advantages

The Tradition 150 panel with the T-style side lapis recommended for straight slope applications.The Tradition 150 is an excellent choice wherethe roof design possesses slopes as low as 1 in12 (4.77 deg.) or where snow build-up and waterpooling areas are identified.


Available in 400 mm and 500 mm widths, theTradition 150 profile can be installed as a singleskin, 1000, 2000 or 3000 system application.Moisture retardant membranes are optional withthe Tradition 150 system. However, it should beconsidered as a secondary precaution in potentialproblematic areas. Please refer to the Tradition 150Vicwest Design Guide for complete design andinstallation details.

Side Lap

The Tradition 150 profile uses the T-stylemechanically seamed side-lap which ismanufactured with a height of 38 mm (1 ½”).

7

marquismetal roof system

8

Key Advantages

The Marquis system possesses superior insulatingvalues as a result of our thermal clip mountingsystem which reduces thermal bridges. Snap capbatten provides a structural advantage, results in amore water-tight system, and presents a traditionalboard and batten appearance.

Thermal clips come in a variety of depths fromflush mount to depths which accommodate up to254 mm of insulating material. Allowance to have10” of insulation with thermal clip system.

Gypsum board allows for a thermal barrier withinthe system, thus reducing thermal bridging. Noseamer is required and clips are fastened throughthe gypsum board to the metal deck below with#14-type AB S.M.S.. The number of screws tobe used depends on:

1) Magnitude of wind uplift

2) Spacing of clips

3) Thickness of the inner metal deck


Marquis is a fully engineered system. Itcombines a number of roofing elements thatmust be properly integrated to ensure goodperformance. To make sure the selected roof

Uncompromised Style,

Matched in Durability

Achieve the distinct

board and batten

appearance with the

Marquis roof system.

This complete system

delivers superior

insulation values and

high efficiency for roofs

and wall assemblies.

and all its components meet the specifiedperformance needs, contact a VICWEST technicalrepresentative. All are well-trained in assistingarchitects and engineers to design with Marquis.Please refer to the Marquis Vicwest Design Guidefor complete design and installation details.

marquis

Optional “Snap-Cap” Batten

The optional Marquis snap-cap batten provides adistinctive architectural feature by creating boldershadow lines. With single skin applications, thesnap-cap batten provides increased rigidity. It isalso used to provide perfect transitions from roofto fascia. Available in two sizes.

Transitions

With the optional snap-cap batten, Marquisprovides a perfect transition from roof to fascia,and even from fascia to soffit.

Snap Cap Depths

50mm (1.968”)75mm (2.953”)

9

10

Key Advantages

This classic standing seam profile, mimickinga batten style roofing panel, will enrich theappearance and add value to any commercial orresidential roofing project. Prestige is a snap-in/interlocking progressive system. Hidden fastenersmean there is no penetration of the metal, thuspreventing water from infiltrating the system. Notethat the slotted anchoring location allows forthermal expansion of the panel (see the diagramson page 11).

prestigemetal roof system

Impressive for

Residential or

Commercial Roofs

Accomplish a

sophisticated batten

style appearance with

Prestige.With a name

derived from the

prestigious style only

it can accomplish,

Prestige reflects a true

artisan quality. A true

display of steel roofing

made beautiful.


It is recommended that Prestige be installedonly on single skin applications where a solidbase of plywood, steel deck or concrete isavailable. Ensure the decking area is coveredwith a good quality air barrier. Prestige uses ahidden fastening and is installed using a snap-in-place design and does not require seamers.Prestige is a cost effective solution that offerstrouble free installation. Please refer to thePrestige Vicwest Design Guide for completedesign and installation details.

prestige

Available in 16”

and 20” widths.

11

Key Advantages

The TSR system demonstrates all weatherperformance in areas of extreme winds, rains andheavy snow. It is engineered specifically forextremely low slope roof applications common toindustrial and institutional buildings.

TSRmetal roof system

Surprisingly

Economical and

Completely Functional

This low slope roofing

system produces a

remarkably attractive

roof with its corrugated

panel appearance.

Completely weather

proof and suited for

projects in high wind

uplift zones, TSR

stays secure with

incomparable quality,

long life, and three

separate systems to

provide energy efficiency.

12


TSR is one of our most versatile profiles. It can beinstalled on single skin, or on the 1000, 2000, 3000systems, allowing for varying degrees of efficiency.TSR is an excellent solution for achieving weathertightness on extremely low slope roofs wherepooling can be problematic. Please refer to theTSR Vicwest Design Guide for complete designand installation details.

TSR

Testings

TSR has UL class 1-90, ASTM 1592 and FMratings on both 22 gauge and 24 gauge for purlinspacings of 5 feet (1500 mm). And now the TSRsystem is one of the few steel roof systems tohave been tested under and passed UL 1897,a stringent wind uplift test standard for roofcoverings. Vicwest’s new rating of 140 poundsper square foot uplift (5.7 kPa) with no visibledamage will give owners great confidence in theintegrity of their roof system.

13

Key Advantages

VICWEST takes energy savings to the top with itsroof panel, ACCURIB. This product features aconcealed fastening system that delivers superiorenergy saving characteristics and aestheticallyuniform appeal for wall and roof applications.ACCURIB panels are available with an added factoryapplied side lap seal to insure a total weather tightsystem.

Benefiting from its long-life durable steel exteriorand high R-value insulation, ACCURIB is a low-maintenance steel faced product that can increasethe value and reduce the energy costs of anybuilding. ACCURIB panels maintain a consistentappearance throughout the entire building and area superb choice for designers seeking a highlyattractive, thermally efficient wall or roof system.


Please refer to the Accurib™ Vicwest DesignGuide for complete design and installation details.

accurib™

metal roof system

An Aesthetically

Pleasing Design

Prestigious, consistent

Accurib serves as both

a roofing or wall system

to easily achieve a

uniform and dramatic

look throughout an

entire building. Highly

attractive and thermally

efficient, its one-piece

lightweight design allows

for timely construction.

14

accurib™

15

exposed fastener

Key Advantages

Exposed Fastening System is an economical choicefor roof designs on a firm budget.


Installing Vicwest profiles using exposed fastenersmakes for a quick installation therefore becominga much more cost effective alternative to a concealedfastening approach. Using the exposed fasteningsystem may also be a favourable choice if it issuspected that the building may experience futureadditions or expansions in which case an exposedfastening system will allow the panel to be easilyremoved and replaced to accommodate accordingly.Please refer to the Exposed Fastener VicwestDesign Guide for complete design and installationdetails.

16

Our Fasteners

Match in Colour too

Installing Vicwest

profiles using exposed

fasteners makes for

a quick installation,

therefore becoming

a much more cost

effective alternative to

a concealed fastening

approach.

14Type

AB

Self-TappingScrew

Material: Hardened carbon steel shank with heavy cadmium plating and a chromate finish.

Availability: 3/4” to 1 1/2” long.Galvanized, Prepainted and Coloured Nylon Head.

Application: Used to fasten exterior and interior profiles, steel or aluminum, to steel and/orwood structural supports.

14-10

Self-DrillingScrew

Material: Hardened carbon steel shank with heavy cadmium plating and a chromate finish.

Availability: 1”, 1 3/8” and 2” long. Galvanized, Prepainted andColoured Nylon Head with or without SkirtNeo washer.

Application: 1” long: Used to fasten exterior and interior profiles, steel or aluminum, tosub-girts and/or steel structural supports up to 1/8” (3mm) thick maximum.

1 3/8”& 2” long: Used to fasten exterior and interior profiles, together withroll-type insulation, to steel structural supports up to 1/8” (3 mm) thick maximum.

Fasteners

exposed fastener

17

*CL 725-SR (No Stiffener Ribs *CL 622-SR (No Stiffener Ribs)

Material Finishes

Z 275 Galvanized or AZ150 Aluminum-Zinc Alloycoatings are recommended for general installationsand installations where there is higher than normalhumidity.

Barrier Series is a PVC coated steel and can bespecified to a variety degrees of thicknesses.It is recommended for areas of high humidityas well as aggressive environmental temperatureconditions.

WeatherX® is Vicwest’s Silicone ModifiedPolyester (SMP) coating. With its unique resinsystem, this SMP topcoat combines a mix ofceramic and inorganic pigments. SelectedWeatherX colors possess reflectance values thatare Energy Star® qualified, meet current coolroof standards and help towards earning LEED™certification. In addition to outstanding colourperformance, WeatherX is resistant to stains,abrasions and metal marking which allows itto endure the physical stresses of fabrication,transit and construction while minimizingcracking and marring. Vicwest is confident inthe WeatherX system and is offering customersan extensive colour palette with exceptionalfilm integrity and color protection. WeatherX issupported by a 40-year limited warranty. Pleaserefer to our colour chart for the tint that bestmatches your design and our compatibility chartfor available gauges.

18

technicalaccessories & material finishes

Up to Date Information,

Best Practices,

everything needed to

work with Vicwest Metal

Roof Systems in the

most efficient manner,

from the product line,

to speciality coatings,

special projects and

accessories. It’s all

here for a complete

roofing system.

Closures

Types:1. Metal closures to match finish of metal cladding.2. Foam closures.

Availability:Both metal and foam closures are availablefor installation over and under panel for mostVICWEST profiles.

Application:Metal closures are used to fill the voids of theexterior panel at base and top of wall. Theseclosures allow air circulation within the panelbetween the exterior sheet and insulation tocontrol condensation.

Foam closures are used to seal in weathertightand/or airtight installations.

Translucent Fibreglass Panels are available inmost VICWEST profiles.

N.B: For availability and colour selection of allthese products, please contact VICWEST.

For complete system components includingstarter strips, snow fences, underlayment etc.contact your closest Vicwest sales office.

• Vicwest’s manufacturing facilities recyclecardboard, paper, wood and steel. We’re alwayslooking for ways to reduce energy consumption.

• Vicwest metal roofing profiles can helpdesigners earn LEED™ certification. Pleasevisit our website at www.vicwest.comfor recent case studies showcasing thesecertified buildings.

• When installed on site, Vicwest Metal Roofingand Cladding Systems will not releaseVOC’s (Volatile organic compounds) into theatmosphere. This applies to interior installations.

For further information on how steel canmeet LEED® Canada requirements asoutlined by the Canadian Build GreenCouncil, please refer to the CSSBI(Canadian Sheet Steel Building Institute)“LEEDING WITH STEEL” handout.

Vicwest is committed

to revitalizing

Canada’s forests

and wildlife by

contributing

to Canadian

environmental

groups through

various eco-gifts

and sponsorships.

Metal Cladding, Decking and Roofing byVicwest provides design professionals with theability to design a building with environmentalsustainability in mind. By incorporating Vicwestmetal building components into your design,the environment of your build will continue tofunction properly and meet the needs of thosewho occupy it without endangering the health andwelfare of future generations.

• Vicwest offers a variety of WeatherX® finisheswhich are Energy Star® qualified. Ask yourrepresentative for details.

• When permitted by local building codes,re-roofing applications can require littleremoval of waste from building sites resultingless in landfills.

• Vicwest Metal Roofing and Cladding Systemsare manufactured with recycled content. Theyare extremely durable, have a long-life cycleand are 100% recyclable at the end of their life.

• Metal Roofing Systems by Vicwest can reducecooling consumption during summer months.This results in less fossil fuels burning in theatmosphere, reducing smog and pollution.

energy savings & LEED™

19

vicwest productsVicwest has what you need to succeed

More projects atwww.vicwest.com

20

Steel Wall Systems

Steel Roof Systems

Insulated Foam Panels

Floor Decks

Roof Decks

Steel Trims & Accessories

Endura Wall Panels

Aluminum Composite Material (ACM) Wall Panels

Up-to-date

Information,

Best Practices,

everything needed to

work with Vicwest

Steel Roof Systems

in the most efficient

manner, from the

product line to

speciality coatings,

special projects and

accessories. It’s all

here for a complete

roofing system.

notes:

VicwestCanada-wide locations

East RegionBOUCHERVILLE – Sales O�ce1295, rue Newton, bureau 201Boucherville, QC J4B 5H2

VICTORIAVILLE – Manufacturing & Sales O�ce707, boul. Industriel Est C. P. 430Victoriaville, QC G6P 6T2

KENSINGTON – ManufacturingP.O. Box 720Kensington, P.E.I. C0B 1M0

MONCTON – Sales O�ce12 Rooney CrescentMoncton, NB E1E 4M3

Central RegionHAMILTON – Manufacturing & Sales O�ce430 Sherman Avenue NorthHamilton, ON L8L 8J6

OAKVILLE – Manufacturing & Sales O�ce1296 South Service Road WestOakville, ON L6L 5T7

STRATFORD – Manufacturing & Sales O�ce362 Lorne Avenue EastStratford, ON N5A 6S4

Western RegionWINNIPEG – Manufacturing & Sales O�ce235 DeBaets StreetWinnipeg, MB R2J 4A8

EDMONTON – Manufacturing & Sales O�ce18028 - 114 AvenueEdmonton, AB T5S 2M2

SASKATOON – Manufacturing & Sales O�ce3542 Millar AvenueSaskatoon, SK S7P 0B6

DELTA – Manufacturing7491 Vantage WayDelta, BC V4G 1C9

SURREY – Manufacturing8081 - 132 StreetSurrey, BC V3W 4N5

Please forward any inquiries to:

[email protected]

You’ve got us right

where you want us

Vicwest has o�ces

coast to coast in

Canada for your

convenience

July 2009

Contact your Vicwest sales representative

www.vicwest.com

VICWEST Metal Roof Systems 090720

Documents